/// <summary>
/// Проверка на пересечения с другими закладными элементами.
/// TRUE - если проверка пройдена
/// </summary>
private bool checkForIntersects(PenetrVueTask task, PenetrInfo penInfo)
{
task.scanInfo();
BCOM.Element penElement =
PenetrHelper.getPenElementWithoutFlanges(task, penInfo);
IEnumerable <BCOM.Element> intersects =
ElementHelper.scanIntersectsInElementRange(penElement,
App.ActiveModelReference);
foreach (BCOM.Element intersection in intersects)
{
if (intersection.IsPenetrationCell())
{
var body = getBodyWithOutFlanges(intersection.AsCellElement());
var contrIntersects =
ElementHelper.scanIntersectsInElementRange(body,
App.ActiveModelReference);
BCOM.Range3d res = App.Range3dInit();
if (App.Range3dIntersect2(ref res, body.Range, penElement.Range))
{
return(false);
}
}
else if (intersection.IsCompundCell())
{
return(false);
}
}
return(true);
}
//static double
// perMaster,
// subPerMaster,
// perStorage,
// perSub,
// active_perMaster,
// active_subPerMaster,
// active_perStorage,
// active_perSub;
// TODO улучшить логику!
//private static void updateUORs(PenetrTask task)
//{
// BCOM.ModelReference taskModel = task.modelRef;
// perMaster = taskModel.UORsPerMasterUnit;
// subPerMaster = taskModel.SubUnitsPerMasterUnit;
// perStorage = taskModel.UORsPerStorageUnit;
// perSub = taskModel.UORsPerSubUnit;
// BCOM.ModelReference activeModel = App.ActiveModelReference;
// active_perMaster = activeModel.UORsPerMasterUnit;
// active_subPerMaster = activeModel.SubUnitsPerMasterUnit;
// active_perStorage = activeModel.UORsPerStorageUnit;
// active_perSub = activeModel.UORsPerSubUnit;
//}
//**********************************************************************
//{ // ПОСТРОЕНИЕ ЧЕРЕЗ ПРОФИЛЬ И ПУТЬ
// *********************************************************************
// BCOM.LineElement line = App.CreateLineElement2(null,
// App.Point3dZero(), App.Point3dFromXYZ(0, 1, 1));
// BCOM.EllipseElement circle = App.CreateEllipseElement2(null,
// App.Point3dZero(), pipeOutsideDiam/2, pipeOutsideDiam/2,
// App.Matrix3dIdentity());
// elements.Clear();
// elements.Add(solids.SweepProfileAlongPath(circle, line),task.Location);
//}
// public static TFCOM.TFFrameList createFrameList(
// PenetrTask task, PenetrInfo penInfo)
// {
// //long diamIndex = DiameterType.Parse(task.DiameterTypeStr).number;
// //PenetrInfo penInfo = penData.getPenInfo(task.FlangesType, diamIndex);
// TFCOM.TFFrameList frameList =
// PenetrHelper.createFrameListRaw(task, penInfo, PenetrTask.LevelMain);
//#if V8i
// PenetrHelper.addProjection(ref frameList,
// task, penInfo, levelSymb, levelRefPoint);
// // TODO видимость контура перфоратора можно в конфиг. переменную
// PenetrHelper.addPerforator(ref frameList, task, penInfo, levelSymb, false);
//#elif CONNECT
// addProjectionAndPerfoNet(
// ref frameList, task, penInfo, levelSymb, levelRefPoint);
//#endif
// return frameList;
// }
public static BCOM.Element getPenElementWithoutFlanges(IPenetrTask task, PenetrInfo penInfo)
{
UOR uor = new UOR(task.ModelRef);
double pipeOutsideDiam = uor.convertToMaster(penInfo.pipeDiameterOutside);
double length = uor.convertToMaster((task.LengthCm * 10.0));
var cylinder = App.SmartSolid.CreateCylinder(null, pipeOutsideDiam / 2.0, length);
return(cylinder.transformByTask(task, shiftZ: length / 2.0));
}
public Penetration(IPenetrTask task)
{
this.Task = task;
this.PenInfo = PenetrDataSource.Instance.getPenInfo(
Task.FlangesType, Task.DiameterType.Number);
taskUOR = new UOR(task.ModelRef);
task.prepairDataGroup();
Initialize();
}
public static void addToModel(IPenetrTask task, PenetrInfo penInfo)
{
try
{
var penetr = new Penetration(task);
penetr.AddProjection();
penetr.AddPerforation();
penetr.AddToModel(false);
penetr.SetTags();
}
catch (Exception ex)
{
ex.ShowMessageBox();
}
}
public void DataPoint(ref BCOM.Point3d Point, BCOM.View View)
{
PenetrUserTask userTask;
if (!processInput(out userTask, ref Point, View))
{
return;
}
PenetrInfo penInfo = PenetrDataSource.Instance.getPenInfo(
userTask.FlangesType,
userTask.DiameterType.Number);
ElementHelper.RunByRecovertingSettings(() => {
PenetrHelper.addToModel(userTask, penInfo);
});
}
public void Dynamics(ref BCOM.Point3d Point, BCOM.View View,
BCOM.MsdDrawingMode DrawMode)
{
PenetrUserTask userTask;
if (!processInput(out userTask, ref Point, View))
{
return;
}
PenetrInfo penInfo = PenetrDataSource.Instance.getPenInfo(
userTask.FlangesType,
userTask.DiameterType.Number);
var frameList = PenetrHelper.createFrameList(
userTask, penInfo, PenetrTaskBase.LevelMain);
var el = frameList.AsTFFrame.Get3DElement();
el.Redraw(DrawMode);
}
//public static TFCOM.TFFrameListClass createFrameList(
// PenetrTaskBase task, PenetrInfo penInfo, BCOM.Level level)
//{
// var taskUOR = new UOR(App.ActiveModelReference);
// double pipeInsideDiam = penInfo.pipeDiameterInside / taskUOR.activeSubPerMaster;
// double pipeOutsideDiam = penInfo.pipeDiameterOutside / taskUOR.activeSubPerMaster;
// double flangeInsideDiam = penInfo.flangeDiameterInside / taskUOR.activeSubPerMaster;
// double flangeOutsideDiam = penInfo.flangeDiameterOutside / taskUOR.activeSubPerMaster;
// double flangeThick = penInfo.flangeThick / taskUOR.activeSubPerMaster;
// double length = task.LengthCm *10 / taskUOR.activeSubPerMaster;
// var solids = App.SmartSolid;
// /*
// ! длина трубы меньше размера проходки на толщину фланца
// ! ЕСЛИ ФЛАНЕЦ ЕСТЬ
// */
// // BCOM.Element template = App.createPointElement();
// double delta = task.FlangesCount == 0 ? 0 :
// task.FlangesCount * flangeThick / 2;
// BCOM.SmartSolidElement cylindrInside =
// solids.CreateCylinder(null, pipeInsideDiam / 2, length - delta);
// BCOM.SmartSolidElement cylindrOutside =
// solids.CreateCylinder(null, pipeOutsideDiam / 2, length - delta);
// var cylindr = solids.SolidSubtract(cylindrOutside, cylindrInside);
// var elements = new Dictionary<BCOM.Element, double>();
// //elements.Add(cylindrInside, 0);
// {
// double shift = task.FlangesCount == 1 ? delta : 0;
// shift *= 1;
// elements.Add(cylindr, (length + shift)/2);
// }
// // Фланцы:
// for (int i = 0; i < task.FlangesCount; ++i)
// {
// BCOM.SmartSolidElement flangeCylindr = solids.SolidSubtract(
// solids.CreateCylinder(null, flangeOutsideDiam / 2, flangeThick),
// solids.CreateCylinder(null, pipeOutsideDiam / 2, flangeThick));
// double shift = 0;
// if (task.FlangesCount == 1)
// {
// //bool isNearest = App.Vector3dEqualTolerance(task.singleFlangeSide,
// // App.Vector3dFromXYZ(0, 0, -1), 0.1); // 0.001
// bool isNearest = true;
// // 0.5 - для видимости фланцев на грани стены/плиты
// shift = isNearest ?
// 0.0 + flangeThick / 2 - task.FlangeWallOffset:
// length - flangeThick / 2 + task.FlangeWallOffset;
// }
// else
// {
// shift = i == 0 ? 0.0 : length;
// // для самих фланцев:
// // 0.5 - для видимости фланцев на грани стены/плиты
// shift += Math.Pow(-1, i) * (flangeThick/2 - task.FlangeWallOffset); //0.02);
// }
// elements.Add(flangeCylindr, shift);
// }
// BCOM.Transform3d taskTran = App.Transform3dFromMatrix3d(task.Rotation);
// //double aboutX, aboutY, aboutZ;
// //task.getCorrectiveAngles(out aboutX, out aboutY, out aboutZ);
// TFCOM.TFFrameListClass frameList = new TFCOM.TFFrameListClass();
// foreach (var pair in elements)
// {
// BCOM.Element elem = pair.Key;
// double shift = pair.Value;
// // elem.Color = 0; // TODO
// BCOM.Point3d offset = App.Point3dAddScaled(
// App.Point3dZero(), App.Point3dFromXYZ(0, 0, 1), shift);
// elem.Move(offset);
// //elem.Rotate(App.Point3dZero(), aboutX, aboutY, aboutZ);
// elem.Transform(taskTran);
// elem.Move(task.Location);
// //elem.Level = level;
// //ElementHelper.setSymbologyByLevel(elem);
// // frameList.AsTFFrame.Add3DElement(elem);
// frameList.Add3DElement(elem);
// }
// //frameList.SetName(PenetrVueTask.CELL_NAME); // ранее было 'EmbeddedPart'
// return frameList;
//}
public static void addProjection(
TFCOM.TFFrameList frame, IPenetrTask task, PenetrInfo penInfo)
{
var taskUOR = new UOR(task.ModelRef);
double pipeInsideDiam = penInfo.pipeDiameterInside / taskUOR.activeSubPerMaster;
double pipeOutsideDiam = penInfo.pipeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeInsideDiam = penInfo.flangeDiameterInside / taskUOR.activeSubPerMaster;
double flangeOutsideDiam = penInfo.flangeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeThick = penInfo.flangeThick / taskUOR.activeSubPerMaster;
double length = task.LengthCm * 10 / taskUOR.activeSubPerMaster;
App.Point3dZero();
frame.AddProjection(ElementHelper.createCrossRound(pipeInsideDiam)
.transformByTask(task), "cross", PenetrTaskBase.LevelSymb);
frame.AddProjection(ElementHelper.createCircle(pipeInsideDiam)
.transformByTask(task), "circle", PenetrTaskBase.LevelSymb);
frame.AddProjection(ElementHelper.createCrossRound(pipeInsideDiam)
.transformByTask(task, shiftZ: length), "cross", PenetrTaskBase.LevelSymb);
frame.AddProjection(ElementHelper.createCircle(pipeInsideDiam)
.transformByTask(task, shiftZ: length), "circle", PenetrTaskBase.LevelSymb);
if (task.FlangesCount > 0)
{
frame.AddProjection(ElementHelper.createCircle(flangeOutsideDiam).
transformByTask(task, 0.0, 0.0, -task.FlangeWallOffset),
"flange", PenetrTaskBase.LevelFlangeSymb);
if (task.FlangesCount == 2)
{
frame.AddProjection(ElementHelper.createCircle(flangeOutsideDiam).
transformByTask(task, 0.0, 0.0, length + task.FlangeWallOffset),
"flange", PenetrTaskBase.LevelFlangeSymb);
}
}
frame.AddProjection(ElementHelper.createPoint().transformByTask(task),
"refPoint", PenetrTaskBase.LevelRefPoint);
}
public static ITFFrameList createFrameCN
(PenetrTask task, PenetrInfo penInfo)
{
task.scanInfo();
// TODO отключено временно, до решения по алгоритму пересечений фланцев:
//if (!Keyins.Penetrations.DEBUG_MODE) {
// if (task.isCompoundExistsInPlace || task.TFFormsIntersected.Count == 0)
// return null;
//}
var taskUOR = task.UOR;
double pipeInsideDiam = penInfo.pipeDiameterInside * taskUOR.active_perSub;
double pipeOutsideDiam = penInfo.pipeDiameterOutside * taskUOR.active_perSub;
double flangeInsideDiam = penInfo.flangeDiameterInside * taskUOR.active_perSub;
double flangeOutsideDiam = penInfo.flangeDiameterOutside * taskUOR.active_perSub;
double flangeThick = penInfo.flangeThick * taskUOR.active_perSub;
double length = task.Length * taskUOR.active_perSub;
double pipeInRadius = pipeInsideDiam / 2;
double pipeOutRadius = pipeOutsideDiam / 2;
var tfApi = new Bentley.Building.Api.TFApplicationList().AsTFApplication;
BCOM.ModelReference activeModel = App.ActiveModelReference;
//ITFBrepList brepList;
//tfApi.CreateTFBrep(0, out brepList);
DPoint3d origin = task.Location.ToDPoint();
origin.ScaleInPlace(taskUOR.active_perMaster);
DMatrix3d rot = task.Rotation.ToDMatrix3d();
var dTran = DTransform3d.FromMatrixAndTranslation(rot, origin);
var tranInfo = new TransformInfo(dTran);
// DMatrix3d.FromColumns(
//rot.RowX.ToDVector(), rot.RowX.ToDVector(), rot.RowX.ToDVector());
//ITFFormRecipeList recipeList;
var model = Session.Instance.GetActiveDgnModel();
var modelRef = Session.Instance.GetActiveDgnModelRef();
//CellHeaderElement taskEl = Element.GetFromElementRef(task.elemRefP) as CellHeaderElement;
//DPoint3d taskOrigin;
//taskEl.GetSnapOrigin(out taskOrigin);
var ellips = new EllipseElement(model, null,
DEllipse3d.FromCenterRadiusNormal(DPoint3d.Zero, pipeOutRadius, DVector3d.FromXY(0, 1)));
ellips.ApplyTransform(tranInfo);
var cone = new ConeElement(model, null, pipeOutRadius, pipeOutRadius,
DPoint3d.FromXYZ(0, length, 0), DPoint3d.Zero,
DMatrix3d.Rotation(DVector3d.UnitX, Angle.FromDegrees(-90)), true);
cone.ApplyTransform(tranInfo);
var ellips2 = new EllipseElement(model, null, DEllipse3d.FromCenterRadiusNormal(
DPoint3d.Zero, pipeInRadius, DVector3d.FromXY(0, 1)));
ellips2.ApplyTransform(tranInfo);
var cone2 = new ConeElement(model, null, pipeInRadius, pipeInRadius,
DPoint3d.Zero, DPoint3d.FromXYZ(0, length, 0), DMatrix3d.Zero, false);
cone2.ApplyTransform(tranInfo);
//int status = brepList.InitCylinder(pipeInsideRadius*task_subPerMaster,
// (length - flangeThick)*task_subPerMaster, ref origin,
// ref matrix, "");
//ITFElementList elemList;
//tfApi.CreateTFElement(0, out elemList);
// Bentley.GeometryNET.Common.CircularCylinder
//ITFBrepList coneBrepList, cone2BrepList, resBrepList;
//tfApi.CreateTFBrep(0, out coneBrepList);
//tfApi.CreateTFBrep(0, out cone2BrepList);
//coneBrepList.InitFromElement(cone, modelRef, "");
//cone2BrepList.InitFromElement(cone2, modelRef, "");
//coneBrepList.AsTFBrep.InitCylinder(pipeInsideRadius, length, ref origin,
// ref matrix, 0);
ITFItemList itemList;
tfApi.CreateTFItem(0, out itemList);
//var sweepDir = DVector3d.FromXY(1, 0);
//coneBrepList.AsTFBrep.Drop(out resBrepList, cone2BrepList, 0);
//sweepDir.NegateInPlace();
// coneBrepList.AsTFBrep.Cut(out resBrepList, cone2BrepList, ref sweepDir, length + 150, false, 0);
//coneBrepList.AsTFBrep.SweepByVector3(ref sweepDir, length + 300,
// pipeOutsideRadius - pipeInsideRadius, 0, 0);
//Array arr = new System.Collections.ArrayList().ToArray();
//coneBrepList.AsTFBrep.Cut2(out resBrepList, cone2BrepList.AsTFBrep, ref sweepDir,
//Bentley.Building.Api.TFdBrepCutMethod.tfdBrepCutMethod_Outside,
//Bentley.Building.Api.TFdBrepCutDirection.tfdBrepCutDirection_Both,
//Bentley.Building.Api.TFdBrepCutDepth.tfdBrepCutDepth_UpToSolid, length,
//arr, 0, false, Bentley.Building.Api.TFdBrepCutDepth.tfdBrepCutDepth_UpToSolid, length,
//arr, 0, false, 0, 0, 0.00005, 0);
//lement resElement;
//resBrepList.GetElement(out resElement, 0, "");
//coneBrepList.GetElement(out resElement, 0, "");
ITFFrameList frameList;
tfApi.CreateTFFrame(0, out frameList);
frameList.AsTFFrame.Add3DElement(cone, 0);
//frameList.AsTFFrame.Add3DElement(cone2, 0);
//frameList.AsTFFrame.Add3DElement(resElement, 0);
//ITFFrameList openingFrameList;
//tfApi.CreateTFFrame(0, out openingFrameList);
//openingFrameList.AsTFFrame.Add3DElement(cone2, 0);
//ITFFormRecipeList openRecipeList;
////tfApi.CreateTFFormRecipeArc
//ITFFormRecipe openRecipe;
//openingFrameList.AsTFFrame.GetFormRecipeList(0, out openRecipeList);
//openRecipe = openRecipeList.AsTFFormRecipe;
//ITFItemList featureList;
//frameList.AsTFFrame.AddOpeningsToForm(out featureList, ref openRecipe, "", 0);
ITFPerforatorList perfoList;
tfApi.CreateTFPerforator(0, out perfoList);
var dir = DVector3d.FromXY(1, 0);
var tran = DTransform3d.Identity;
perfoList.InitFromElement(ellips, ref dir, length, ref tran, "");
perfoList.AsTFPerforator.SetIsVisible(false, 0);
perfoList.SetSweepMode(Bentley.Building.Api.TFdPerforatorSweepMode.tfdPerforatorSweepModeBi, "");
perfoList.SetPolicy(Bentley.Building.Api.TFdPerforatorPolicy.tfdPerforatorPolicyThroughHoleWithinSenseDist, "");
frameList.AsTFFrame.SetPerforatorList(ref perfoList, 0);
frameList.AsTFFrame.SetSenseDistance2(length / 100, 0);
frameList.AsTFFrame.SetPerforatorsAreActive(true, 0);
int stat; // = tfApi.ModelReferenceAddFrameList(modelRef, ref frameList, 0);
var frame = frameList.AsTFFrame;
stat = tfApi.ModelReferenceUpdateAutoOpeningsByFrame(modelRef,
ref frame, true, false, Bentley.Building.Api.TFdFramePerforationPolicy.tfdFramePerforationPolicyNone, 0);
//Element cylindr;
//brepList.GetElement(out cylindr, 0, "");
//cylindr.AddToModel();
//Element tfElement;
//Element perfo = null;
//Element dp_2d = null;
//int value;
//tfApi.ModelReferenceAddElement(ref cylindr, Session.Instance.GetActiveDgnModel(),
// 0, 0, out value);
//tfApi.ModelReferenceConstructFrameElement(Session.Instance.GetActiveDgnModel(),
// 0, ref cylindr, ref perfo, ref origin, ref dp_2d, "name", null,
// 1, 0, false, null, false, task.Length, 0.00005, 0, out tfElement);
//frameList.InitFromElement(cylindr, "");
// frameList.AsTFFrame.Add3DElement(cylindr, 0);
return(frameList);
}
public static void addToModelWithProjAndPerfo(ref TFCOM.TFFrameList frameList,
PenetrTask task, PenetrInfo penInfo,
BCOM.Level levelSymb, BCOM.Level levelRefPoint)
{
var taskUOR = new UOR(task.modelRef);
double pipeInsideDiam = penInfo.pipeDiameterInside / taskUOR.active_subPerMaster;
double pipeOutsideDiam = penInfo.pipeDiameterOutside / taskUOR.active_subPerMaster;
double flangeInsideDiam = penInfo.flangeDiameterInside / taskUOR.active_subPerMaster;
double flangeOutsideDiam = penInfo.flangeDiameterOutside / taskUOR.active_subPerMaster;
double flangeThick = penInfo.flangeThick / taskUOR.active_subPerMaster;
double length = task.LengthCm * 10 / taskUOR.active_subPerMaster;
BCOM.ModelReference activeModel = App.ActiveModelReference;
//AppTF.ModelReferenceAddFrameList(activeModel, ref frameList);
frameList.Synchronize();
var frameListClass = frameList as TFCOM.TFFrameListClass;
BCOM.Element bcomElem;
frameListClass.GetElement(out bcomElem);
var tfApi = new Bentley.Building.Api.TFApplicationList().AsTFApplication;
var modelRef = Session.Instance.GetActiveDgnModelRef();
var model = Session.Instance.GetActiveDgnModel();
Element ielement = Element.GetFromElementRef((IntPtr)bcomElem.MdlElementRef());
modelRef.GetFromElementRef((IntPtr)bcomElem.MdlElementRef());
ITFFrameList iframeList;
tfApi.CreateTFFrame(0, out iframeList);
iframeList.InitFromElement(ielement, "");
iframeList.Synchronize("");
DPoint3d origin = task.Location.ToDPoint();
origin.ScaleInPlace(taskUOR.active_perMaster);
DMatrix3d matrix = DMatrix3d.FromRows(
task.Rotation.RowX.ToDVector(), task.Rotation.RowY.ToDVector(),
task.Rotation.RowZ.ToDVector());
DTransform3d dTran = DTransform3d.FromMatrixAndTranslation(matrix, origin);
TransformInfo tranInfo = new TransformInfo(dTran);
double pipeInsideRadius = pipeOutsideDiam / 2 * taskUOR.active_perMaster;
double dgnLength = length * taskUOR.active_perMaster;
var ellips = new EllipseElement(model, null,
DEllipse3d.FromCenterRadiusNormal(DPoint3d.Zero, pipeInsideRadius,
DVector3d.FromXY(0, 1)));
ellips.ApplyTransform(tranInfo);
//{ // ПЕРФОРАТОР:
// ITFPerforatorList perfoList;
// tfApi.CreateTFPerforator(0, out perfoList);
// var dir = DVector3d.FromXY(1, 0);
// var tran = DTransform3d.Identity;
// //perfoList.InitFromElement(ellips, ref dir, length*toUOR, ref tran, "");
// perfoList.InitFromElement2(ellips, length*taskUOR.active_perMaster, "");
// perfoList.AsTFPerforator.SetIsVisible(false, 0);
// perfoList.SetSweepMode(Bentley.Building.Api.TFdPerforatorSweepMode.tfdPerforatorSweepModeBi, "");
// perfoList.SetPolicy(Bentley.Building.Api.TFdPerforatorPolicy.tfdPerforatorPolicyThroughHoleWithinSenseDist, "");
// (iframeList as Bentley.Building.Api.TFFrameList).SetPerforatorList(ref perfoList, 0);
// // iframeList.AsTFFrame.SetPerforatorList(ref perfoList, 0);
// iframeList.AsTFFrame.SetSenseDistance2(length, 0);
// iframeList.AsTFFrame.SetPerforatorsAreActive(true, 0);
// var frame = iframeList.AsTFFrame;
// tfApi.ModelReferenceUpdateAutoOpeningsByFrame(modelRef,
//ref frame, true, false, Bentley.Building.Api.TFdFramePerforationPolicy.tfdFramePerforationPolicyStrict, 0);
//}
// tfApi.ModelReferenceRewriteFrameInstance(modelRef, iframeList.AsTFFrame, 0);
//iframeList.AsTFFrame.Synchronize(0);
{ // ПРОЕКЦИОННАЯ ГЕОМЕТРИЯ
ITFProjectionList projList, projList1, projList2, projList3;
tfApi.CreateTFProjection(0, out projList);
tfApi.CreateTFProjection(0, out projList1);
tfApi.CreateTFProjection(0, out projList2);
tfApi.CreateTFProjection(0, out projList3);
var zero = DPoint3d.Zero;
DPoint3d[] verts = { zero, zero, zero, zero, zero };
double k = pipeInsideRadius * Math.Cos(Math.PI / 4);
verts[0].X = -k;
verts[0].Z = -k;
verts[1].X = k;
verts[1].Z = k;
verts[3] = verts[0];
verts[3].Z *= -1;
verts[4] = verts[1];
verts[4].Z *= -1;
LineStringElement cross1 = new LineStringElement(model, null, verts);
for (int i = 0; i < verts.Count(); ++i)
{
verts[i].Y = dgnLength;
}
LineStringElement cross2 = new LineStringElement(model, null, verts);
cross1.ApplyTransform(tranInfo);
cross2.ApplyTransform(tranInfo);
projList1.AsTFProjection.SetEmbeddedElement(cross1, 0);
projList2.AsTFProjection.SetEmbeddedElement(cross2, 0);
LineElement refPoint =
new LineElement(model, null, new DSegment3d(zero, zero));
refPoint.ApplyTransform(tranInfo);
ElementPropertiesSetter setter = new ElementPropertiesSetter();
setter.SetWeight(7);
setter.Apply(refPoint);
projList3.AsTFProjection.SetEmbeddedElement(refPoint, 0);
projList.Append(projList1, "");
projList.Append(projList2, "");
projList.Append(projList3, "");
iframeList.AsTFFrame.SetProjectionList(projList, 0);
//iframeList.AsTFFrame.Synchronize(0);
//iframeList.Synchronize(string.Empty);
}
tfApi.ModelReferenceRewriteFrameInstance(modelRef, iframeList.AsTFFrame, 0);
// int stat = tfApi.ModelReferenceRewriteFrameList(modelRef, iframeList, 0);
//tfApi.ModelReferenceAddFrameList(modelRef, ref iframeList, 0);
// tfApi.ModelReferenceRewriteFrameList(modelRef, iframeList, 0);
//frameListClass = frameList as TFCOM.TFFrameListClass;
//frameListClass.GetElement(out bcomElem);
// setDataGroupInstance(bcomElem, task);
}
public static void addPerforator(TFCOM.TFFrameList frameList,
IPenetrTask task, PenetrInfo penInfo, BCOM.Level levelSymb, bool isVisible)
{
var taskUOR = new UOR(task.ModelRef);
double pipeInsideDiam = penInfo.pipeDiameterInside / taskUOR.activeSubPerMaster;
double pipeOutsideDiam = penInfo.pipeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeInsideDiam = penInfo.flangeDiameterInside / taskUOR.activeSubPerMaster;
double flangeOutsideDiam = penInfo.flangeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeThick = penInfo.flangeThick / taskUOR.activeSubPerMaster;
double length = task.LengthCm * 10 / taskUOR.activeSubPerMaster;
var angles = task.CorrectiveAngles;
BCOM.Transform3d taskTran = App.Transform3dFromMatrix3d(task.Rotation);
// ПЕРФОРАТОР
BCOM.EllipseElement perfoEl =
App.CreateEllipseElement2(null, App.Point3dZero(),
pipeInsideDiam / 2, pipeInsideDiam / 2,
App.Matrix3dIdentity(), BCOM.MsdFillMode.Filled);
{
BCOM.Point3d offset = App.Point3dAddScaled(
App.Point3dZero(),
App.Point3dFromXYZ(0, 0, 1), length / 2);
perfoEl.Move(offset);
perfoEl.Rotate(App.Point3dZero(), angles.X, angles.Y, angles.Z);
}
perfoEl.Level = levelSymb;
ElementHelper.setSymbologyByLevel(perfoEl);
perfoEl.Transform(taskTran);
perfoEl.Move(task.Location);
BCOM.Point3d perfoVec = perfoEl.Normal;
TFCOM.TFPerforatorList perfoList = AppTF.CreateTFPerforator();
var tranIdentity = App.Transform3dIdentity();
perfoList.InitFromElement(perfoEl, perfoVec, length / 2 * 1.01, tranIdentity);
perfoList.SetSweepMode(
TFCOM.TFdPerforatorSweepMode.tfdPerforatorSweepModeBi);
//perfoList.SetSenseDist(1.01 * length / 2);
perfoList.SetPolicy(
TFCOM.TFdPerforatorPolicy.tfdPerforatorPolicyThroughHoleWithinSenseDist);
perfoList.SetIsVisible(isVisible);
frameList.AsTFFrame.SetPerforatorList(perfoList);
frameList.AsTFFrame.SetSenseDistance2(length / 2);
frameList.AsTFFrame.SetPerforatorsAreActive(true);
frameList.Synchronize();
{
// ! без этого кода не срабатывает перфорация в стенке/плите
// судя по всему инициализирует обновление объектов, с которыми
// взаимодействует frame
AppTF.ModelReferenceUpdateAutoOpeningsByFrame(
App.ActiveModelReference, frameList.AsTFFrame, true, false,
TFCOM.TFdFramePerforationPolicy.tfdFramePerforationPolicyNone);
}
}
public static TFCOM.TFFrameListClass createFrameList(
IPenetrTask task, PenetrInfo penInfo, BCOM.Level level)
{
task.scanInfo();
var taskUOR = new UOR(task.ModelRef);
double pipeInsideDiam = penInfo.pipeDiameterInside / taskUOR.activeSubPerMaster;
double pipeOutsideDiam = penInfo.pipeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeInsideDiam = penInfo.flangeDiameterInside / taskUOR.activeSubPerMaster;
double flangeOutsideDiam = penInfo.flangeDiameterOutside / taskUOR.activeSubPerMaster;
double flangeThick = penInfo.flangeThick / taskUOR.activeSubPerMaster;
double length = task.LengthCm * 10 / taskUOR.activeSubPerMaster;
var solids = App.SmartSolid;
/*
* ! длина трубы меньше размера проходки на толщину фланца
* ! ЕСЛИ ФЛАНЕЦ ЕСТЬ
*/
double delta = task.FlangesCount == 0 ? 0 :
task.FlangesCount * flangeThick / 2;
BCOM.SmartSolidElement cylindrInside =
solids.CreateCylinder(null, pipeInsideDiam / 2, length - delta);
BCOM.SmartSolidElement cylindrOutside =
solids.CreateCylinder(null, pipeOutsideDiam / 2, length - delta);
var cylindr = solids.SolidSubtract(cylindrOutside, cylindrInside);
var elements = new Dictionary <BCOM.Element, double>();
{
double shift = task.FlangesCount == 1 ? delta : 0;
shift *= task.IsSingleFlangeFirst ? 1 : -1;
elements.Add(cylindr, (length + shift) / 2);
}
// Фланцы:
for (int i = 0; i < task.FlangesCount; ++i)
{
BCOM.SmartSolidElement flangeCylindr = solids.SolidSubtract(
solids.CreateCylinder(null, flangeOutsideDiam / 2, flangeThick),
solids.CreateCylinder(null, pipeOutsideDiam / 2, flangeThick));
double shift = 0;
if (task.FlangesCount == 1)
{
bool isNearest = App.Vector3dEqualTolerance(task.SingleFlangeSide,
App.Vector3dFromXYZ(0, 0, -1), 0.1); // 0.001
// 0.5 - для видимости фланцев на грани стены/плиты
shift = isNearest ?
0.0 + flangeThick / 2 - task.FlangeWallOffset:
length - flangeThick / 2 + task.FlangeWallOffset;
}
else
{
shift = i == 0 ? 0.0 : length;
// для самих фланцев:
shift += Math.Pow(-1, i) * (flangeThick / 2 - task.FlangeWallOffset); //0.02);
}
elements.Add(flangeCylindr, shift);
}
BCOM.Transform3d taskTran = App.Transform3dFromMatrix3d(task.Rotation);
var angles = task.CorrectiveAngles;
TFCOM.TFFrameListClass frameList = new TFCOM.TFFrameListClass();
foreach (var pair in elements)
{
BCOM.Element elem = pair.Key;
double shift = pair.Value;
elem.Color = 0; // TODO
BCOM.Point3d offset = App.Point3dAddScaled(
App.Point3dZero(), App.Point3dFromXYZ(0, 0, 1), shift);
elem.Move(offset);
elem.Rotate(App.Point3dZero(), angles.X, angles.Y, angles.Z);
elem.Transform(taskTran);
elem.Move(task.Location);
elem.Level = level;
ElementHelper.setSymbologyByLevel(elem);
frameList.AsTFFrame.Add3DElement(elem);
}
frameList.AsTFFrame.SetName(PenConfigVariables.CellName.Value); // ранее было 'EmbeddedPart'
return(frameList);
}
