} // end WriteStratum
private void WriteCountTrees(StreamWriter strWriteOut, reportHeaders rh, IEnumerable <CountTreeDO> ctList, ref int pageNumb)
{
// output count table (was originally in the old A2 report as a separate page)
foreach (CountTreeDO cdo in ctList)
{
WriteReportHeading(strWriteOut, rh.reportTitles[0], rh.reportTitles[1],
rh.reportTitles[2], rh.A04counts, 11, ref pageNumb, "");
prtFields = CountTreeMethods.buildPrintArray(cdo, cdo.SampleGroup.Stratum.Code);
printOneRecord(fieldLengths, prtFields, strWriteOut);
} // end foreach loop
} // end WriteCountTrees
public int TableEditChecks(IEnumerable <SaleDO> saleList, IEnumerable <StratumDO> strList,
IEnumerable <CountTreeDO> cntList, IEnumerable <TreeDO> tList, IEnumerable <SampleGroupDO> sgList)
{
ErrorLogMethods.fileName = fileName;
string currentRegion = Global.BL.getRegion();
string isVLL = "";
//string isVLL = Global.BL.getVLL();
// edit checks for each table
// sale table
// empty or more than one record?
errorValue = SaleMethods.MoreThanOne(saleList);
if (errorValue == 0)
{
ErrorLogMethods.LoadError("Sale", "E", "25", errorValue, "NoName"); // error 25 -- table cannot be empty
}
else if (errorValue > 1)
{
ErrorLogMethods.LoadError("Sale", "E", "28", errorValue, "SaleNumber"); // error 28 -- more than one sale record not allowed
}
if (errorValue == 1)
{
// and blank sale number
errorValue = SaleMethods.BlankSaleNum(saleList);
if (errorValue != -1)
{
ErrorLogMethods.LoadError("Sale", "E", " 8Sale Number", errorValue, "SaleNumber");
}
} // endif
// end sale table edit checks
// *******************************************************************
// stratum table
// List<StratumDO> strList = Global.BL.getStratum();
errorValue = StratumMethods.IsEmpty(strList);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Stratum", "E", errorValue.ToString(), errorValue, "NoName");
}
else if (errorValue == 0) // means there are records to check
{
foreach (StratumDO sdo in strList)
{
// check for valid fixed plot size or BAF for each stratum
double BAForFPS = StratumMethods.CheckMethod(strList, sdo.Code);
if ((sdo.Method == "PNT" || sdo.Method == "P3P" || sdo.Method == "PCM" ||
sdo.Method == "PCMTRE" || sdo.Method == "3PPNT") && BAForFPS == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "22", (long)sdo.Stratum_CN, "BasalAreaFactor");
}
else if ((sdo.Method == "FIX" || sdo.Method == "F3P" || sdo.Method == "FIXCNT" ||
sdo.Method == "FCM") && BAForFPS == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "23", (long)sdo.Stratum_CN, "FixedPlotSize");
}
// check for acres on area based methods
double currAcres = Utilities.AcresLookup((long)sdo.Stratum_CN, sdo.Code);
if ((sdo.Method == "PNT" || sdo.Method == "FIX" || sdo.Method == "P3P" ||
sdo.Method == "F3P" || sdo.Method == "PCM" || sdo.Method == "3PPNT" ||
sdo.Method == "FCM" || sdo.Method == "PCMTRE") && currAcres == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "24", (long)sdo.Stratum_CN, "NoName");
}
else if ((sdo.Method == "100" || sdo.Method == "3P" ||
sdo.Method == "S3P" || sdo.Method == "STR") && currAcres == 0)
{
ErrorLogMethods.LoadError("Stratum", "W", "Stratum has no acres", (long)sdo.Stratum_CN, "NoName");
}
// August 2017 -- added check for valid yield component code
if (sdo.YieldComponent != "CL" && sdo.YieldComponent != "CD" &&
sdo.YieldComponent != "ND" && sdo.YieldComponent != "NL" &&
sdo.YieldComponent != "" && sdo.YieldComponent != " " &&
sdo.YieldComponent != null)
{
ErrorLogMethods.LoadError("Stratum", "W", "Yield Component has invalid code", (long)sdo.Stratum_CN, "YieldComponent");
}
} // end foreach loop
} // endif
// end stratum table edit checks
// ************************************************************************
// cutting unit table
//List<CuttingUnitDO> cuList = Global.BL.getCuttingUnits();
errorValue = CuttingUnitMethods.IsEmpty(Global.BL.getCuttingUnits());
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Cutting Unit", "E", errorValue.ToString(), 0, "NoName");
}
// end cutting unit edit checks
// **************************************************************************
// count table
//List<CountTreeDO> cntList = Global.BL.getCountTrees();
foreach (StratumDO sl in strList)
{
errorValue = CountTreeMethods.check3Pcounts(cntList, sl);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("CountTree", "E", "Cannot tally by sample group for 3P strata.", (long)sl.Stratum_CN, "TreeDefaultValue");
}
} // end foreach on stratum
// **************************************************************************
// tree table
//List<TreeDO> tList = Global.BL.getTrees();
errorValue = TreeListMethods.IsEmpty(tList);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Tree", "E", errorValue.ToString(), 0, "NoName");
}
else if (errorValue == 0) // means tree table has records
{
// make sure single stratum is NOT FIXCNT which cannot have measured trees anyway.
//if(strList.Count == 1 && strList[0].Method != "FIXCNT")
// doesn't matter if it's a single stratum or any stratum that's FIXCNT
// that method still has no measured trees so need to skip these checks.
if (strList.First().Method != "FIXCNT")
{
var tMeas = tList.Select(tree => tree.CountOrMeasure = "M");
//tList = Global.BL.JustMeasuredTrees();
// March 2016 -- if the entire cruisde has no measured trees, that uis a critical erro
// and should stop the program. Since no report can be generated, a message box appears to warn the user
// of the condition.
if (tMeas.Count() == 0)
{
MessageBox.Show("NO MEASURED TREES IN THIS CRUISE.\nCannot continue and cannot produce any reports.", "ERROR", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return(-1);
} //endif
// general checks include checking for secondary top DIB greater than primary
// recoverable percent greater than seen defect primary
// missing species, product or uom when tree count is greater than zero or DBH is greater than zero
// and check for upper stem diameter greater than DBH
errorValue = TreeListMethods.GeneralChecks(tList, currentRegion);
} // endif single stratum
} // endif
// end tree table edit checks
// *************************************************************************
// log table
List <LogDO> logList = Global.BL.getLogs().ToList();
if (logList.Count > 0)
{
errorValue = LogMethods.CheckNumberLogs(logList);
errorValue = LogMethods.CheckFBS(logList);
if (isVLL == "true")
{
errorValue = LogMethods.CheckVLL(logList);
}
errorValue = LogMethods.CheckDefect(logList);
if (currentRegion != "05")
{
errorValue = LogMethods.CheckLogGrade(logList);
}
} // endif records in log table to check
// end log table edit checks
// *************************************************************************
// volume equation table
List <VolumeEquationDO> volList = Global.BL.getVolumeEquations().ToList();
errorValue = VolumeEqMethods.IsEmpty(volList);
// pull region
string currRegion = saleList.First().Region;
//string currRegion = Global.BL.getRegion();
if (errorValue != 0)
{
ErrorLogMethods.LoadError("VolumeEquation", "E", errorValue.ToString(), 0, "NoName");
}
else if (errorValue == 0) // means the table is not empty and checks can proceed
{
// Match unique species/product to volume equation \
errorValue = VolumeEqMethods.MatchSpeciesProduct(volList, tList);
errorValue = VolumeEqMethods.GeneralEquationChecks(volList);
// if VLL, check equations for Behrs
if (isVLL == "true")
{
errorValue = VolumeEqMethods.FindBehrs(volList);
}
} // endif
// end volume equation edit checks
// *************************************************************************
// value equations
// Check for valid equations
IEnumerable <ValueEquationDO> valList = Global.BL.getValueEquations();
if (valList.Any()) // there are records to check
{
errorValue = ValueEqMethods.CheckEquations(valList, currentRegion);
}
// end value equation edit checks
// *************************************************************************
// quality adjustment equations
IEnumerable <QualityAdjEquationDO> qaeList = Global.BL.getQualAdjEquations();
if (qaeList.Any()) // there are records to check
{
errorValue = QualityAdjMethods.CheckEquations(qaeList);
}
// end quality adjustment equation edit checks
// ************************************************************************
// June 2014 -- apparently the error log table is not meant to capture
// errors on the basis of an entire table. Only on individual records.
// so if no reports have been selected, this check needs to move to
// the Output section when the user clicks GO. If the reports list
// comes up empty then display a message box telling them to go back
// and enter reports.
// no reports selected
/*
* List<ReportsDO> selectedReports = Global.BL.GetSelectedReports();
* if (selectedReports.Count == 0)
* {
* ErrorLogMethods.LoadError("Reports", "E", "26", 0,"NoName");
* errorValue++;
* } // endif no reports
*/
// ************************************************************************
// sample group table
//List<SampleGroupDO> sampGroups = Global.BL.getSampleGroups();
errorValue = SampleGroupMethods.CheckAllUOMandCutLeave(strList, sgList, fileName);
// ************************************************************************
errList = ErrorLogMethods.errList;
if (errList.Count > 0)
{
Global.BL.SaveErrorMessages(errList);
} // endif
return(errorValue);
} // end TableEditChecks