IEnumerator ExecuteAssumeStationOrder_EnterState() {
LogEvent();
TryBreakOrbit();
_helm.ChangeSpeed(Speed.Stop);
if (IsHQ) {
D.Assert(FormationStation.IsOnStation);
if (CurrentOrder.ToNotifyCmd) {
Command.HandleOrderOutcome(CurrentOrder.Directive, this, isSuccess: true);
}
CurrentState = ShipState.Idling;
yield return null;
}
_apMoveSpeed = Speed.Standard;
if (ShowDebugLog) {
string speedMsg = "{0}({1:0.##}) units/hr".Inject(_apMoveSpeed.GetValueName(), _apMoveSpeed.GetUnitsPerHour(Data));
D.Log("{0} is initiating repositioning to FormationStation at speed {1}. DistanceToStation: {2:0.##}.",
DebugName, speedMsg, FormationStation.DistanceToStation);
}
Call(ShipState.Moving);
yield return null; // required so Return()s here
if (_orderFailureCause != UnitItemOrderFailureCause.None) {
if (CurrentOrder.ToNotifyCmd) {
Command.HandleOrderOutcome(CurrentOrder.Directive, this, isSuccess: false, failCause: _orderFailureCause);
}
switch (_orderFailureCause) {
case UnitItemOrderFailureCause.UnitItemNeedsRepair:
InitiateRepair(retainSuperiorsOrderOnRepairCompletion: false);
break;
case UnitItemOrderFailureCause.UnitItemDeath:
// Dead state will follow
break;
case UnitItemOrderFailureCause.TgtUncatchable:
case UnitItemOrderFailureCause.TgtDeath:
case UnitItemOrderFailureCause.TgtRelationship:
case UnitItemOrderFailureCause.TgtUnreachable:
default:
throw new NotImplementedException(ErrorMessages.UnanticipatedSwitchValue.Inject(_orderFailureCause));
}
yield return null;
}
if (FormationStation.IsOnStation) {
D.Log(ShowDebugLog, "{0} has reached its formation station.", DebugName);
}
else {
D.Warn("{0} has exited 'Moving' to its formation station without being on station.", DebugName);
}
// If there was a failure generated by Moving, resulting new Orders or Dead state should keep this point from being reached
D.AssertDefault((int)_orderFailureCause, _orderFailureCause.GetValueName());
// No need to wait for HQ to stop turning as we are aligning with its intended facing
Vector3 hqIntendedHeading = Command.HQElement.Data.IntendedHeading;
_helm.ChangeHeading(hqIntendedHeading, headingConfirmed: () => {
Speed hqSpeed = Command.HQElement.CurrentSpeedSetting;
_helm.ChangeSpeed(hqSpeed); // UNCLEAR always align speed with HQ?
//D.Log(ShowDebugLog, "{0} has aligned heading and speed {1} with HQ {2}.", DebugName, hqSpeed.GetValueName(), Command.HQElement.DebugName);
if (CurrentOrder.ToNotifyCmd) {
Command.HandleOrderOutcome(CurrentOrder.Directive, this, isSuccess: true);
}
CurrentState = ShipState.Idling;
});
}
/// <summary>
/// Plots the course to the target and notifies the requester of the outcome via the onCoursePlotSuccess or Failure events.
/// </summary>
/// <param name="target">The target.</param>
/// <param name="travelSpeed">The speed to travel at.</param>
public virtual void PlotCourse(INavigableTarget target, Speed travelSpeed, OrderSource orderSource) {
D.Assert(travelSpeed != default(Speed) && travelSpeed != Speed.Stop && travelSpeed != Speed.EmergencyStop, "{0} speed of {1} is illegal.".Inject(Name, travelSpeed.GetValueName()));
Target = target;
TravelSpeed = travelSpeed;
_orderSource = orderSource;
}
/// <summary>
/// Primary exposed control that changes the speed of the ship and disengages the pilot.
/// For use when managing the speed of the ship without relying on the Autopilot.
/// </summary>
/// <param name="newSpeed">The new speed.</param>
internal void ChangeSpeed(Speed newSpeed) {
D.Assert(__ValidExternalChangeSpeeds.Contains(newSpeed), newSpeed.GetValueName());
//D.Log(ShowDebugLog, "{0} is about to disengage pilot and change speed to {1}.", DebugName, newSpeed.GetValueName());
DisengagePilot();
ChangeSpeed_Internal(newSpeed, isFleetSpeed: false);
}
/// <summary>
/// Exposed method allowing the ShipHelm to change speed. Returns <c>true</c> if the
/// intendedNewSpeedValue was different than IntendedCurrentSpeedValue, false otherwise.
/// </summary>
/// <param name="newSpeed">The new speed.</param>
/// <param name="intendedNewSpeedValue">The new speed value in units per hour.</param>
/// <returns></returns>
internal void ChangeSpeed(Speed newSpeed, float intendedNewSpeedValue) {
//D.Log(ShowDebugLog, "{0}'s actual speed = {1:0.##} at EngineRoom.ChangeSpeed({2}, {3:0.##}).",
//Name, ActualSpeedValue, newSpeed.GetValueName(), intendedNewSpeedValue);
__PreviousIntendedCurrentSpeedValue = IntendedCurrentSpeedValue;
CurrentSpeedSetting = newSpeed;
IntendedCurrentSpeedValue = intendedNewSpeedValue;
if (newSpeed == Speed.HardStop) {
//D.Log(ShowDebugLog, "{0} received ChangeSpeed to {1}!", DebugName, newSpeed.GetValueName());
DisengageForwardPropulsion();
DisengageReversePropulsion();
DisengageDriftCorrection();
// Can't terminate CollisionAvoidance as expect to find obstacle in Job lookup when collision averted
_shipRigidbody.velocity = Vector3.zero;
return;
}
if (Mathfx.Approx(intendedNewSpeedValue, __PreviousIntendedCurrentSpeedValue, .01F)) {
if (newSpeed != Speed.Stop) { // can't be HardStop
if (!IsPropulsionEngaged) {
D.Error("{0} received ChangeSpeed({1}, {2:0.00}) without propulsion engaged to execute it.", DebugName, newSpeed.GetValueName(), intendedNewSpeedValue);
}
}
//D.Log(ShowDebugLog, "{0} is ignoring speed request of {1}({2:0.##}) as it is a duplicate.", DebugName, newSpeed.GetValueName(), intendedNewSpeedValue);
return;
}
if (IsCollisionAvoidanceEngaged) {
//D.Log(ShowDebugLog, "{0} is deferring engaging propulsion at Speed {1} until all collisions are averted.",
// DebugName, newSpeed.GetValueName());
return; // once collision is averted, ResumePropulsionAtRequestedSpeed() will be called
}
EngageOrContinuePropulsion();
}
/// <summary>
/// Engages the pilot to move to the target using the provided proxy. It will notify the ship
/// when it arrives via Ship.HandleTargetReached.
/// </summary>
/// <param name="apTgtProxy">The proxy for the target this Pilot is being engaged to reach.</param>
/// <param name="speed">The initial speed the pilot should travel at.</param>
/// <param name="isFleetwideMove">if set to <c>true</c> [is fleetwide move].</param>
internal void EngagePilotToMoveTo(AutoPilotDestinationProxy apTgtProxy, Speed speed, bool isFleetwideMove) {
Utility.ValidateNotNull(apTgtProxy);
D.Assert(!InvalidApSpeeds.Contains(speed), speed.GetValueName());
ApTargetProxy = apTgtProxy;
ApSpeed = speed;
_isApFleetwideMove = isFleetwideMove;
_isApCurrentSpeedFleetwide = isFleetwideMove;
_isApInPursuit = false;
RefreshCourse(CourseRefreshMode.NewCourse);
EngagePilot();
}
/// <summary>
/// Records the AutoPilot values needed to plot a course.
/// </summary>
/// <param name="autoPilotTgt">The target this AutoPilot is being engaged to reach.</param>
/// <param name="autoPilotSpeed">The speed the autopilot should travel at.</param>
protected void RecordAutoPilotCourseValues(INavigable autoPilotTgt, Speed autoPilotSpeed) {
Utility.ValidateNotNull(autoPilotTgt);
D.Assert(!_inValidAutoPilotSpeeds.Contains(autoPilotSpeed), "{0} speed of {1} for autopilot is invalid.".Inject(Name, autoPilotSpeed.GetValueName()));
AutoPilotTarget = autoPilotTgt;
AutoPilotSpeed = autoPilotSpeed;
}
/// <summary>
/// Plots the course to the target and notifies the requester of the outcome via the onCoursePlotSuccess or Failure events.
/// </summary>
/// <param name="target">The target.</param>
/// <param name="speed">The speed.</param>
public void PlotCourse(INavigableTarget target, Speed speed) {
D.Assert(speed != default(Speed) && speed != Speed.Stop, "{0} speed of {1} is illegal.".Inject(_fleet.FullName, speed.GetValueName()));
TryCheckForSystemAccessPoints(target, out _fleetSystemExitPoint, out _targetSystemEntryPoint);
Target = target;
FleetSpeed = speed;
AssessFrequencyOfCourseProgressChecks();
InitializeReplotValues();
GenerateCourse();
}
/// <summary>
/// Plots the course to the target and notifies the requester of the outcome via the onCoursePlotSuccess or Failure events.
/// </summary>
/// <param name="apTgt">The target this AutoPilot is being engaged to reach.</param>
/// <param name="apSpeed">The speed the autopilot should travel at.</param>
/// <param name="apTgtStandoffDistance">The target standoff distance.</param>
internal void PlotPilotCourse(IFleetNavigable apTgt, Speed apSpeed, float apTgtStandoffDistance) {
Utility.ValidateNotNull(apTgt);
D.Assert(!InvalidApSpeeds.Contains(apSpeed), apSpeed.GetValueName());
ApTarget = apTgt;
ApSpeedSetting = apSpeed;
_apTgtStandoffDistance = apTgtStandoffDistance;
IList<Vector3> directCourse;
if (TryDirectCourse(out directCourse)) {
// use this direct course
//D.Log(ShowDebugLog, "{0} will use a direct course to {1}.", DebugName, ApTarget.DebugName);
_isApCourseFromPath = false;
ConstructApCourse(directCourse);
HandleApCoursePlotSuccess();
}
else {
_isApCourseFromPath = true;
ResetPathReplotValues();
PlotPath();
}
}
/// <summary>
/// Plots the course to the target and notifies the requester of the outcome via the onCoursePlotSuccess or Failure events.
/// </summary>
/// <param name="target">The target.</param>
/// <param name="speed">The speed.</param>
/// <param name="orderSource">The source of this move order.</param>
public void PlotCourse(INavigableTarget target, Speed speed, OrderSource orderSource) {
D.Assert(speed != default(Speed) && speed != Speed.Stop, "{0} speed of {1} is illegal.".Inject(_ship.FullName, speed.GetValueName()));
// NOTE: I know of no way to check whether a target is unreachable at this stage since many targets move,
// and most have a closeEnoughDistance that makes them reachable even when enclosed in a keepoutZone
if (target is IFormationStation) {
D.Assert(orderSource == OrderSource.ElementCaptain);
DestinationInfo = new ShipDestinationInfo(target as IFormationStation);
}
else if (target is SectorModel) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
DestinationInfo = new ShipDestinationInfo(target as SectorModel, destinationOffset);
}
else if (target is StationaryLocation) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
var autoPilotSpeedReference = new Reference<float>(() => _autoPilotSpeedInUnitsPerHour);
DestinationInfo = new ShipDestinationInfo((StationaryLocation)target, destinationOffset, autoPilotSpeedReference);
}
else if (target is FleetCmdModel) {
D.Assert(orderSource == OrderSource.UnitCommand);
var fleetTarget = target as FleetCmdModel;
bool isEnemy = _ship.Owner.IsEnemyOf(fleetTarget.Owner);
DestinationInfo = new ShipDestinationInfo(fleetTarget, _ship.Data.FormationStation.StationOffset, isEnemy);
}
else if (target is AUnitBaseCmdModel) {
D.Assert(orderSource == OrderSource.UnitCommand);
var baseTarget = target as AUnitBaseCmdModel;
bool isEnemy = _ship.Owner.IsEnemyOf(baseTarget.Owner);
DestinationInfo = new ShipDestinationInfo(baseTarget, _ship.Data.FormationStation.StationOffset, isEnemy);
}
else if (target is FacilityModel) {
D.Assert(orderSource == OrderSource.ElementCaptain);
var facilityTarget = target as FacilityModel;
bool isEnemy = _ship.Owner.IsEnemyOf(facilityTarget.Owner);
DestinationInfo = new ShipDestinationInfo(facilityTarget, isEnemy);
}
else if (target is ShipModel) {
D.Assert(orderSource == OrderSource.ElementCaptain);
var shipTarget = target as ShipModel;
bool isEnemy = _ship.Owner.IsEnemyOf(shipTarget.Owner);
DestinationInfo = new ShipDestinationInfo(shipTarget, isEnemy);
}
else if (target is APlanetoidModel) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
DestinationInfo = new ShipDestinationInfo(target as APlanetoidModel, destinationOffset);
}
else if (target is SystemModel) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
DestinationInfo = new ShipDestinationInfo(target as SystemModel, destinationOffset);
}
else if (target is StarModel) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
DestinationInfo = new ShipDestinationInfo(target as StarModel, destinationOffset);
}
else if (target is UniverseCenterModel) {
Vector3 destinationOffset = orderSource == OrderSource.UnitCommand ? _ship.Data.FormationStation.StationOffset : Vector3.zero;
DestinationInfo = new ShipDestinationInfo(target as UniverseCenterModel, destinationOffset);
}
else {
D.Error("{0} of Type {1} not anticipated.", target.FullName, target.GetType().Name);
return;
}
OrderSource = orderSource;
AutoPilotSpeed = speed;
RefreshNavigationalValues();
OnCoursePlotSuccess();
}
