private double getDelta_0(Document doc, Rebar myRebar)
{
//UIDocument uiDoc = this.ActiveUIDocument;
//Document doc = uiDoc.Document;
//Get diameter of rebar
RebarBarType myRbType = doc.GetElement(myRebar.GetTypeId()) as RebarBarType;
double myRebarDiameter = myRbType.BarDiameter;
// Get host of rebar
ElementId myBeamId = myRebar.GetHostId();
Element myBeam = doc.GetElement(myBeamId);
if (myBeam.Category.Name != "Structural Framing")
{
TaskDialog.Show("Loi!", "Hay chon 1 rebar co host la 1 Structural Framing");
return(10000000);
}
else
{
//Get location curve of beam
LocationCurve lc = myBeam.Location as LocationCurve;
Line line = lc.Curve as Line;
//Get vector of location cuver beam
XYZ p = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = q - p; // Vector equation of line
XYZ middlePoint = myRebar.get_BoundingBox(null).Max.Add(myRebar.get_BoundingBox(null).Min) / 2;
// NOTE LAM TRON SO
// middlePoint = new XYZ(middlePoint.X,middlePoint.Y),
// Math.Round(middlePoint.Z,1));
double delta_0 = Math.Sqrt(Math.Pow(middlePoint.X - p.X, 2) + Math.Pow(middlePoint.Y - p.Y, 2)) - myRebarDiameter / 2;
return(delta_0);
}
}
public static Dictionary <string, object> getHostElement(List <Revit.Elements.Element> elements)
{
Document doc = DocumentManager.Instance.CurrentDBDocument;
List <Revit.Elements.Element> elIdList = new List <Revit.Elements.Element>();
//UIApplication uiapp = DocumentManager.Instance.CurrentUIApplication;
//Autodesk.Revit.ApplicationServices.Application app = uiapp.Application;
//UIDocument uidoc = DocumentManager.Instance.CurrentUIApplication.ActiveUIDocument;
foreach (Revit.Elements.Element e in elements)
{
Autodesk.Revit.DB.Element el = doc.GetElement(e.UniqueId.ToString());
Rebar r = el as Rebar;
ElementId elId = r.GetHostId();
elIdList.Add(doc.GetElement(elId).ToDSType(true));
}
return(new Dictionary <string, object>
{
{ "hostElements", elIdList },
});
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
Selection sel = commandData.Application.ActiveUIDocument.Selection;
if (sel.GetElementIds().Count == 0)
{
message = "Выберите арматурные стержни";
return(Result.Failed);
}
Rebar bar = doc.GetElement(sel.GetElementIds().First()) as Rebar;
if (bar == null)
{
message = "Выберите арматурные стержни";
return(Result.Failed);
}
#if R2017
XYZ normal = bar.Normal;
#else
RebarShapeDrivenAccessor acc = bar.GetShapeDrivenAccessor();
XYZ normal = acc.Normal;
#endif
RebarBarType barType = doc.GetElement(bar.GetTypeId()) as RebarBarType;
int rebarStyleNumber = bar.get_Parameter(BuiltInParameter.REBAR_ELEM_HOOK_STYLE).AsInteger();
RebarStyle rebarStyle = (RebarStyle)rebarStyleNumber;
RebarHookType hookTypeStart = null;
ElementId hookStartTypeId = bar.get_Parameter(BuiltInParameter.REBAR_ELEM_HOOK_START_TYPE).AsElementId();
if (hookStartTypeId != null)
{
hookTypeStart = doc.GetElement(hookStartTypeId) as RebarHookType;
}
RebarHookType hookTypeEnd = null;
ElementId hookEndTypeId = bar.get_Parameter(BuiltInParameter.REBAR_ELEM_HOOK_END_TYPE).AsElementId();
if (hookEndTypeId != null)
{
hookTypeEnd = doc.GetElement(hookEndTypeId) as RebarHookType;
}
RebarBendData rbd = bar.GetBendData();
RebarHookOrientation hookOrient0 = rbd.HookOrient0;
RebarHookOrientation hookOrient1 = rbd.HookOrient1;
Element host = doc.GetElement(bar.GetHostId());
List <Curve> curves = bar.GetCenterlineCurves(false, true, true, MultiplanarOption.IncludeOnlyPlanarCurves, 0).ToList();
int barsCount = bar.NumberOfBarPositions;
List <ElementId> newRebarIds = new List <ElementId>();
using (Transaction tr = new Transaction(doc))
{
tr.Start("Explode rebar set");
for (int i = 0; i < barsCount; i++)
{
#if R2017
Transform barOffset = bar.GetBarPositionTransform(i);
#else
Transform barOffset = acc.GetBarPositionTransform(i);
#endif
XYZ offset = barOffset.Origin;
Rebar newRebar = Rebar.CreateFromCurves(doc, rebarStyle, barType, hookTypeStart, hookTypeEnd, host, normal, curves,
hookOrient0, hookOrient1, true, false);
doc.Regenerate();
ElementTransformUtils.MoveElement(doc, newRebar.Id, offset);
newRebarIds.Add(newRebar.Id);
}
doc.Delete(bar.Id);
tr.Commit();
}
sel.SetElementIds(newRebarIds);
return(Result.Succeeded);
}
protected override void PopulateDbRow(Element element, DataRow row)
{
Rebar rebar = element as Rebar;
base.SetDbRowIDAndHostId(rebar, rebar.Document.GetElement(rebar.GetHostId()), row);
}
private void Stream( ArrayList data, Rebar rebar )
{
data.Add( new Snoop.Data.ClassSeparator( typeof( Rebar ) ) );
data.Add( new Snoop.Data.ElementId( "Bar type", rebar.GetTypeId(), rebar.Document ) );
data.Add( new Snoop.Data.ElementId( "Rebar shape", rebar.RebarShapeId, rebar.Document ) );
data.Add( new Snoop.Data.ElementId( "Host", rebar.GetHostId(), rebar.Document ) );
data.Add( new Snoop.Data.Object( "Distribution path", rebar.GetDistributionPath() ) );
data.Add( new Snoop.Data.Enumerable( "GetCenterlineCurves(false, false, false)", rebar.GetCenterlineCurves( false, false, false ) ) );
data.Add( new Snoop.Data.String( "LayoutRule", rebar.LayoutRule.ToString() ) );
if( rebar.LayoutRule != RebarLayoutRule.Single )
{
data.Add( new Snoop.Data.Double( "Distribution path length", rebar.ArrayLength ) );
data.Add( new Snoop.Data.Int( "Quantity", rebar.Quantity ) );
data.Add( new Snoop.Data.Int( "NumberOfBarPositions", rebar.NumberOfBarPositions ) );
data.Add( new Snoop.Data.Double( "MaxSpacing", rebar.MaxSpacing ) );
}
//TF
data.Add( new Snoop.Data.Object( "ConstraintsManager", rebar.GetRebarConstraintsManager() ) );
//TFEND
}
private List <ElementId> copyRebarByDistance(Document doc, Rebar myRebar, List <double> myDistances)
{
//UIDocument uiDoc = this.ActiveUIDocument;
//Document doc = uiDoc.Document;
//Get Id rebar
ElementId myIdRebar = myRebar.Id;
//Get Id Beam
ElementId myIdBeam = myRebar.GetHostId();
Element myBeam = doc.GetElement(myIdBeam);
if (myBeam.Category.Name != "Structural Framing")
{
TaskDialog.Show("Loi!", "Hay chon 1 rebar co host la 1 Structural Framing");
return(null);
}
else
{
LocationCurve cur = myBeam.Location as LocationCurve;
Line lineCur = cur.Curve as Line;
XYZ q = lineCur.GetEndPoint(0);
XYZ p = lineCur.GetEndPoint(1);
XYZ v = p - q;
double lengCurLine = v.GetLength();
List <XYZ> myCoors = new List <XYZ>();
double delta0 = getDelta_0(doc, myRebar);
if (delta0 == 10000000)
{
return(null);
}
foreach (double distance in myDistances)
{
XYZ myPointPlace = ((distance - delta0) / lengCurLine) * v;
myCoors.Add(myPointPlace);
}
if (myCoors.Count < 1)
{
TaskDialog.Show("Loi!", "Khong the copy...");
return(null);
}
ICollection <ElementId> myRebarIdCol;
List <ElementId> myListIdRebar = new List <ElementId>();
// using transcation (edit DB)
using (Transaction myTrans = new Transaction(doc, "CopyElementByCoordinate"))
{
myTrans.Start();
foreach (XYZ myXYZ in myCoors)
{
myRebarIdCol = ElementTransformUtils.CopyElement(doc, myIdRebar, myXYZ);
foreach (ElementId elemRebarId in myRebarIdCol)
{
myListIdRebar.Add(elemRebarId);
}
}
myTrans.Commit();
}
return(myListIdRebar);
}
}
// Select Faces boundaries
public void rebarBeam_Form_Update()
{
UIDocument uiDoc = this.ActiveUIDocument;
Document doc = uiDoc.Document;
double factor = 4;
double delta_1 = 50 / 304.8;
double pitch_1 = 150 / 304.8;
double pitch_2 = 300 / 304.8;
double delta_3 = 50 / 304.8;
double pitch_3 = 100 / 304.8;
int N3 = 5;
double myConvertFactor = 304.8;
bool inputSuccess = false;
while (!inputSuccess)
{
using (var myInputFormSetting = new InputDialog())
{
myInputFormSetting.ShowDialog();
factor = Convert.ToDouble(myInputFormSetting.factorTb.Text);
delta_1 = Convert.ToDouble(myInputFormSetting.delta_1Tb.Text) / myConvertFactor;
pitch_1 = Convert.ToDouble(myInputFormSetting.pitch_1Tb.Text) / myConvertFactor;
pitch_2 = Convert.ToDouble(myInputFormSetting.pitch_2Tb.Text) / myConvertFactor;
delta_3 = Convert.ToDouble(myInputFormSetting.delta_3Tb.Text) / myConvertFactor;
pitch_3 = Convert.ToDouble(myInputFormSetting.pitch_3Tb.Text) / myConvertFactor;
N3 = Convert.ToInt32(myInputFormSetting.n3Tb.Text);
//if the user hits cancel just drop out of macro
if (myInputFormSetting.DialogResult == System.Windows.Forms.DialogResult.Cancel)
{
return;
}
{
//else do all this :)
myInputFormSetting.Close();
}
if (myInputFormSetting.DialogResult == System.Windows.Forms.DialogResult.OK)
{
//else do all this :)
inputSuccess = true;
myInputFormSetting.Close();
}
}
}
// Pick Rebar
List <int> myListIdCategoryRebar = new List <int>();
myListIdCategoryRebar.Add((int)BuiltInCategory.OST_Rebar);
// Select first Element (ex beam)
Reference myRefRebar = uiDoc.Selection.PickObject(ObjectType.Element,
new FilterByIdCategory(myListIdCategoryRebar),
"Pick a Rebar...");
//Get rebar from ref
Rebar myRebar = doc.GetElement(myRefRebar) as Rebar;
//Set rebar single
// using (Transaction myTrans = new Transaction(doc,"SET FIRST REBAR AS SINGLE"))
//
// {
// myTrans.Start();
// myRebar.GetShapeDrivenAccessor().SetLayoutAsSingle();
// myTrans.Commit();
// }
Element myBeam = doc.GetElement(myRebar.GetHostId());
//Get location curve of beam
LocationCurve lc = myBeam.Location as LocationCurve;
Line line = lc.Curve as Line;
//Get vector of location cuver beam
XYZ p1 = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = q - p1; // Vector equation of line
XYZ p = p1 - 0.1 * v;
//Set current Beam be Joined
setBeJoined(myBeam);
while (true)
{
//Pick Face end
List <Reference> myListRef = uiDoc.Selection.PickObjects(ObjectType.Face) as List <Reference>;
List <Face> myListFacePicked = new List <Face>();
foreach (Reference myRef in myListRef)
{
Element E = doc.GetElement(myRef);
GeometryObject myGeoObj = E.GetGeometryObjectFromReference(myRef);
Face myPickedFace = myGeoObj as Face;
myListFacePicked.Add(myPickedFace);
}
if (myListFacePicked.Count != 2 && myListFacePicked.Count != 4)
{
TaskDialog.Show("Error!", "Chua ho tro lua chon: " + myListFacePicked.Count() + " mat, Chon 2 hoac 4 mat");
continue;
}
else
{
string caseDistributionRebar = "TH2: Co dam o giua";
List <double> myListSpace = new List <double>()
{
pitch_1, pitch_2, pitch_3, pitch_3, pitch_2, pitch_1
};
if (myListFacePicked.Count == 2)
{
myListSpace = new List <double>()
{
pitch_1, pitch_2, pitch_1, pitch_2, pitch_2, pitch_1
};
caseDistributionRebar = "TH1: Khong co dam o giua";
}
TaskDialog.Show("Info", caseDistributionRebar);
// List of boundaries faces
List <double> myListEndPointDis = getAndSortDisOfEndFaces(myListFacePicked, p);
myListEndPointDis.Sort();
Dictionary <double, int> myDicDisNumDetail = detailListDistance_Update(myListEndPointDis,
factor,
delta_1, pitch_1,
pitch_2,
delta_3, pitch_3, N3);
List <ElementId> myListRebarCopyId = copyRebarByDistance2_Update(myRebar, myDicDisNumDetail);
List <double> myDistances = myDicDisNumDetail.Keys.ToList();
myDistances.Sort();
List <int> myListNum = new List <int>();
foreach (double key in myDistances)
{
myListNum.Add(myDicDisNumDetail[key]);
}
//Layout
// using transcation (edit DB)
for (int i = 0; i < myListRebarCopyId.Count(); i++)
{
using (Transaction myTrans = new Transaction(doc, "CopyElementByCoordinate"))
{
myTrans.Start();
ElementId rebarId = myListRebarCopyId[i];
Rebar myRebarI = doc.GetElement(rebarId) as Rebar;
if (myListNum[i] < -1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing((myListNum[i]) * -1, myListSpace[i], true, true, true);
}
if (myListNum[i] == -1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] == 0)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] == 1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] > 1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing(myListNum[i], myListSpace[i], false, true, true);
}
myTrans.Commit();
}
}
//delete element
using (Transaction myTrans = new Transaction(doc, "Delete First ReBar"))
{
myTrans.Start();
//doc.Delete(myRebar.Id);
myTrans.Commit();
}
}
}
}
public void rebarBeam2Col(Document doc, double factor, double delta_1, double pitch_1, double pitch_2, Rebar myRebar, List <Element> myInterSec)
{
//UIDocument uiDoc = this.ActiveUIDocument;
//Document doc = uiDoc.Document;
// Get baem Id
ElementId myBeamId = myRebar.GetHostId();
double lenSegment;
List <double> myListDis = new List <double>();
ElementId myCol1Id = myInterSec[0].Id;
ElementId myCol2Id = myInterSec[1].Id;
myListDis = getEndsSegBeam(doc, myBeamId, myCol1Id, myCol2Id);
lenSegment = myListDis[1] - myListDis[0];
List <double> myListDisDetail = detailListDistance(myListDis, factor, delta_1, pitch_1);
List <ElementId> myListRebarCopyId = copyRebarByDistance(doc, myRebar, myListDisDetail);
// RebarSet Layout
using (Transaction trans = new Transaction(doc, "Change rebar set"))
{
trans.Start();
for (int i = 0; i < myListRebarCopyId.Count; i++)
{
ElementId rebarId = myListRebarCopyId[i];
Rebar myRebarI = doc.GetElement(rebarId) as Rebar;
int numberRebar = 2;
if (i == myListRebarCopyId.Count - 1)
{
numberRebar = (int)((lenSegment / factor) / pitch_1);
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing(numberRebar, pitch_1, true, true, true);
}
else if (i == 0)
{
numberRebar = (int)((lenSegment / factor) / pitch_1);
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing(numberRebar, pitch_1, false, true, true);
}
else if (i == 1)
{
double delta_2 = (lenSegment / factor - delta_1) % pitch_1;
double len2 = (lenSegment - 2 * (lenSegment / factor) + delta_2);
numberRebar = (int)((lenSegment - 2 * (lenSegment / factor) + delta_2) / pitch_2) + 1;
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing(numberRebar, pitch_2, false, true, true);
}
}
trans.Commit();
}
}
public void rebarStirrupLayout_Form(UIDocument uiDoc)
{
Document doc = uiDoc.Document;
double factor = 4;
double delta_1 = 50 / 304.8;
double pitch_1 = 150 / 304.8;
double pitch_2 = 300 / 304.8;
double delta_3 = 50 / 304.8;
double pitch_3 = 100 / 304.8;
int N3 = 5;
double myConvertFactor = 304.8;
bool inputSuccess = false;
while (!inputSuccess)
{
using (var myInputFormSetting = new SettingDialog())
{
myInputFormSetting.ShowDialog();
factor = Convert.ToDouble(myInputFormSetting.factorTb.Text);
delta_1 = Convert.ToDouble(myInputFormSetting.delta_1Tb.Text) / myConvertFactor;
pitch_1 = Convert.ToDouble(myInputFormSetting.pitch_1Tb.Text) / myConvertFactor;
pitch_2 = Convert.ToDouble(myInputFormSetting.pitch_2Tb.Text) / myConvertFactor;
delta_3 = Convert.ToDouble(myInputFormSetting.delta_3Tb.Text) / myConvertFactor;
pitch_3 = Convert.ToDouble(myInputFormSetting.pitch_3Tb.Text) / myConvertFactor;
N3 = Convert.ToInt32(myInputFormSetting.n3Tb.Text);
//if the user hits cancel just drop out of macro
if (myInputFormSetting.DialogResult == System.Windows.Forms.DialogResult.Cancel)
{
return;
}
{
//else do all this :)
myInputFormSetting.Close();
}
if (myInputFormSetting.DialogResult == System.Windows.Forms.DialogResult.OK)
{
//else do all this :)
inputSuccess = true;
myInputFormSetting.Close();
}
}
}
// Pick Rebar
List <int> myListIdCategoryRebar = new List <int>();
myListIdCategoryRebar.Add((int)BuiltInCategory.OST_Rebar);
// Select first Element (ex beam)
Reference myRefRebar = uiDoc.Selection.PickObject(ObjectType.Element,
new FilterByIdCategory(myListIdCategoryRebar),
"Pick a Rebar...");
//Get rebar from ref
Rebar myRebar = doc.GetElement(myRefRebar) as Rebar;
//Set rebar single
using (Transaction myTrans = new Transaction(doc, "SET FIRST REBAR AS SINGLE"))
{
myTrans.Start();
myRebar.GetShapeDrivenAccessor().SetLayoutAsSingle();
myTrans.Commit();
}
Element myBeam = doc.GetElement(myRebar.GetHostId());
//Set current Beam be Joined
setBeJoined(doc, myBeam);
while (true)
{
List <int> myListBeamCol = new List <int>();
myListBeamCol.Add((int)BuiltInCategory.OST_StructuralFraming);
myListBeamCol.Add((int)BuiltInCategory.OST_StructuralColumns);
// Select first Element (ex beam)
List <Reference> myListInterRef = uiDoc.Selection.PickObjects(ObjectType.Element,
new FilterByIdCategory(myListBeamCol),
"Pick a Beam and Col...") as List <Reference>;
List <Element> myInterSec = new List <Element>();
foreach (Reference myRef in myListInterRef)
{
myInterSec.Add(doc.GetElement(myRef));
}
// Kiem tra co 2 cot ko?
int numCol = 0;
foreach (Element myE in myInterSec)
{
if (myE.Category.Name == "Structural Columns")
{
numCol += 1;
}
}
if (numCol != 2 || myInterSec.Count > 3)
{
TaskDialog.Show("Erorr!!!", "Các đối tượng được chọn phải có đủ 2 cột và tối đa 1 dầm");
//return;
}
// Kiem tra truong hop tinh
if (myInterSec.Count() == 2)
{
rebarBeam2Col(doc, factor, delta_1, pitch_1, pitch_2, myRebar, myInterSec);
}
else
{
List <double> myListEndPointDis = getEndsSegBeam2(doc, myBeam.Id, myInterSec);
myListEndPointDis.Sort();
Dictionary <double, int> myDicDisNumDetail = detailListDistance2(myListEndPointDis,
factor,
delta_1, pitch_1,
pitch_2,
delta_3, pitch_3, N3);
List <double> myListSpace = new List <double>()
{
pitch_1, pitch_2, pitch_3, pitch_3, pitch_2, pitch_1
};
List <ElementId> myListRebarCopyId = copyRebarByDistance2(doc, myRebar, myDicDisNumDetail);
List <double> myDistances = myDicDisNumDetail.Keys.ToList();
myDistances.Sort();
List <int> myListNum = new List <int>();
foreach (double key in myDistances)
{
myListNum.Add(myDicDisNumDetail[key]);
}
//Layout
// using transcation (edit DB)
for (int i = 0; i < myListRebarCopyId.Count(); i++)
{
using (Transaction myTrans = new Transaction(doc, "CopyElementByCoordinate"))
{
myTrans.Start();
ElementId rebarId = myListRebarCopyId[i];
Rebar myRebarI = doc.GetElement(rebarId) as Rebar;
if (myListNum[i] < -1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing((myListNum[i]) * -1, myListSpace[i], true, true, true);
}
if (myListNum[i] == -1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] == 0)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] == 1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsSingle();
}
if (myListNum[i] > 1)
{
myRebarI.GetShapeDrivenAccessor().SetLayoutAsNumberWithSpacing(myListNum[i], myListSpace[i], false, true, true);
}
myTrans.Commit();
}
}
//delete element
using (Transaction myTrans = new Transaction(doc, "Delete First ReBar"))
{
myTrans.Start();
//doc.Delete(myRebar.Id);
myTrans.Commit();
}
}
}
}
private void Stream( ArrayList data, Rebar rebar )
{
data.Add( new Snoop.Data.ClassSeparator( typeof( Rebar ) ) );
data.Add( new Snoop.Data.ElementId( "Bar type", rebar.GetTypeId(), rebar.Document ) );
data.Add( new Snoop.Data.ElementId( "Rebar shape", rebar.RebarShapeId, rebar.Document ) );
data.Add( new Snoop.Data.ElementId( "Host", rebar.GetHostId(), rebar.Document ) );
data.Add( new Snoop.Data.Object( "Distribution path", rebar.GetDistributionPath() ) );
data.Add( new Snoop.Data.Enumerable( "GetCenterlineCurves(false, false, false)", rebar.GetCenterlineCurves( false, false, false, MultiplanarOption.IncludeOnlyPlanarCurves, 0 ) ) );
data.Add( new Snoop.Data.String( "LayoutRule", rebar.LayoutRule.ToString() ) );
if( rebar.LayoutRule != RebarLayoutRule.Single )
{
data.Add( new Snoop.Data.Double( "Distribution path length", rebar.ArrayLength ) );
data.Add( new Snoop.Data.Int( "Quantity", rebar.Quantity ) );
data.Add( new Snoop.Data.Int( "NumberOfBarPositions", rebar.NumberOfBarPositions ) );
data.Add( new Snoop.Data.Double( "MaxSpacing", rebar.MaxSpacing ) );
data.Add( new Snoop.Data.Bool( "BarsOnNormalSide", rebar.BarsOnNormalSide ) );
}
data.Add( new Snoop.Data.String( "ScheduleMark", rebar.ScheduleMark ) );
data.Add( new Snoop.Data.Double( "Volume", rebar.Volume ) );
data.Add( new Snoop.Data.Double( "TotalLength", rebar.TotalLength ) );
data.Add( new Snoop.Data.Object( "Normal", rebar.Normal ) );
//TF
data.Add( new Snoop.Data.Object( "ConstraintsManager", rebar.GetRebarConstraintsManager() ) );
//TFEND
// Bending data
data.Add( new Snoop.Data.Object( "Bending Data", rebar.GetBendData() ) );
// Hook information
addHookInformation2Rebar( data, rebar, 0 );
addHookInformation2Rebar( data, rebar, 1 );
}
private List <ElementId> copyRebarByDistance_Update_MaxSpace(Document doc, Rebar myRebar, Dictionary <double, double> myDicDisNum)
{
List <double> myDistances = myDicDisNum.Keys.ToList();
myDistances.Sort();
List <double> myListNum = new List <double>();
foreach (double key in myDistances)
{
myListNum.Add(myDicDisNum[key]);
}
//Get Id rebar
ElementId myIdRebar = myRebar.Id;
//Get Id Beam
ElementId myIdBeam = myRebar.GetHostId();
Element myBeam = doc.GetElement(myIdBeam);
if (myBeam.Category.Name != "Structural Framing")
{
TaskDialog.Show("Loi!", "Hay chon 1 rebar co host la 1 Structural Framing");
return(null);
}
else
{
LocationCurve cur = myBeam.Location as LocationCurve;
Line lineCur = cur.Curve as Line;
XYZ p1 = lineCur.GetEndPoint(0);
XYZ q = lineCur.GetEndPoint(1);
XYZ v = q - p1;
double lengCurLine = v.GetLength();
XYZ p = p1 - 0.1 * v;
List <XYZ> myCoors = new List <XYZ>();
// NOTE LAM TRON SO
//Get diameter of rebar
XYZ middlePoint = myRebar.get_BoundingBox(null).Max.Add(myRebar.get_BoundingBox(null).Min) / 2;
List <Curve> centerLines = myRebar.GetCenterlineCurves(false, false, false,
MultiplanarOption.IncludeOnlyPlanarCurves, 0)
as List <Curve>;
foreach (Curve myCurBar in centerLines)
{
middlePoint = myCurBar.GetEndPoint(0);
break;
}
Plane myReBarPlane = Plane.CreateByNormalAndOrigin(v, middlePoint);
// Distance from first rebar to
RebarBarType myRbType = doc.GetElement(myRebar.GetTypeId()) as RebarBarType;
double myRebarDiameter = myRbType.BarDiameter;
XYZ v1 = p - myReBarPlane.Origin;
double delta_0 = Math.Abs(myReBarPlane.Normal.DotProduct(v1));
if (delta_0 == 10000000)
{
return(null);
}
foreach (double distance in myDistances)
{
XYZ myPointPlace = ((distance - delta_0) / lengCurLine) * v;
myCoors.Add(myPointPlace);
}
if (myCoors.Count < 1)
{
TaskDialog.Show("Loi!", "Khong the copy...");
return(null);
}
ICollection <ElementId> myRebarIdCol;
List <ElementId> myListIdRebar = new List <ElementId>();
// using transcation (edit DB)
using (Transaction myTrans = new Transaction(doc, "CopyElementByCoordinate"))
{
myTrans.Start();
foreach (XYZ myXYZ in myCoors)
{
myRebarIdCol = ElementTransformUtils.CopyElement(doc, myIdRebar, myXYZ);
foreach (ElementId elemRebarId in myRebarIdCol)
{
myListIdRebar.Add(elemRebarId);
}
}
myTrans.Commit();
}
return(myListIdRebar);
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
Debug.Listeners.Clear();
Debug.Listeners.Add(new RbsLogger.Logger("SelectHost"));
UIDocument uiDoc = commandData.Application.ActiveUIDocument;
Document doc = uiDoc.Document;
Selection sel = uiDoc.Selection;
List <ElementId> selIds = sel.GetElementIds().ToList();
if (selIds.Count != 1)
{
message = "Выберите элемент, для которого нужно найти основу.";
return(Result.Failed);
}
Element selElem = doc.GetElement(selIds.First());
Debug.WriteLine("Selected elem id: " + selElem.Id.IntegerValue.ToString());
ElementId hostId = null;
if (selElem is AreaReinforcement)
{
AreaReinforcement el = selElem as AreaReinforcement;
hostId = el.GetHostId();
Debug.WriteLine("It is area reinforcement");
}
if (selElem is PathReinforcement)
{
PathReinforcement el = selElem as PathReinforcement;
hostId = el.GetHostId();
Debug.WriteLine("It is path reinforcement");
}
if (selElem is Rebar)
{
Rebar el = selElem as Rebar;
hostId = el.GetHostId();
Debug.WriteLine("It is rebar");
}
if (selElem is RebarInSystem)
{
RebarInSystem el = selElem as RebarInSystem;
hostId = el.SystemId;
Debug.WriteLine("It is rebar in system");
}
if (selElem is FamilyInstance)
{
FamilyInstance el = selElem as FamilyInstance;
Element host = el.Host;
if (host != null)
{
hostId = host.Id;
Debug.WriteLine("It is family instance with host");
}
else
{
Element parentFamily = el.SuperComponent;
if (parentFamily != null)
{
Debug.WriteLine("It is family instance with parent family");
hostId = parentFamily.Id;
}
}
}
if (hostId == null)
{
message = "Не удалось получить родительский элемент.";
Debug.WriteLine("Host not found");
return(Result.Failed);
}
else
{
sel.SetElementIds(new List <ElementId> {
hostId
});
Debug.WriteLine("Host id: " + hostId.IntegerValue.ToString());
return(Result.Succeeded);
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
Application app = commandData.Application.Application;
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = uidoc.Document;
Reference pickedReference = null;
try
{
pickedReference = uidoc.Selection.PickObject(ObjectType.Element, new RebarSelectFilter() , "Pick a Rebar");
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
return Result.Cancelled;
}
Rebar rebar = doc.GetElement(pickedReference) as Rebar;
if (!rebar.IsRebarShapeDriven() || rebar.LayoutRule == RebarLayoutRule.Single)
{
message = "Singe rebar and non-shape driven rebars are not supported.";
return Result.Failed;
}
double rebarDiameter = rebar.GetBendData().BarDiameter;
RebarBarType barType = doc.GetElement(rebar.GetTypeId()) as RebarBarType;
IList<Curve> transformedCurvesFirst = Utils.GetTransformedCenterLineCurvesAtPostition(rebar, 0);
IList<Curve> transformedCurvesLast = Utils.GetTransformedCenterLineCurvesAtPostition(rebar, rebar.NumberOfBarPositions-1);
XYZ direction = transformedCurvesFirst.OfType<Line>().First().Direction;
List<XYZ> rebarInBendFirstPoints = GetPointInArc(transformedCurvesFirst, rebarDiameter);
List<XYZ> rebarInBendLastPoints = GetPointInArc(transformedCurvesLast, rebarDiameter);
using (Transaction t1 = new Transaction(doc, "Add rebar in bend"))
{
t1.Start();
for (int i = 0; i < rebarInBendFirstPoints.Count; i++)
{
Line newRebarCenterline = Line.CreateBound(rebarInBendFirstPoints[i], rebarInBendLastPoints[i]);
IList<Curve> rebarCurve = new List<Curve>();
rebarCurve.Add(newRebarCenterline);
Rebar.CreateFromCurves(doc, RebarStyle.Standard, barType, null, null, doc.GetElement(rebar.GetHostId()), direction, rebarCurve, RebarHookOrientation.Left, RebarHookOrientation.Left, true, false);
}
doc.Regenerate();
t1.Commit();
}
return Result.Succeeded;
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
//Pegar uidoc e doc
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = uidoc.Document;
try
{
//Filtro para pegar apenas vergalhões
ISelectionFilter selectionFilter = new vergalhaoSelectionFilter();
//Pegar elemento
Reference pickedObj = uidoc.Selection.PickObject(ObjectType.Element, selectionFilter, "Selecione uma vergalhão");
ElementId eleId = pickedObj.ElementId;
Element ele = doc.GetElement(eleId);
Rebar rebar = ele as Rebar; //Pega o elemento selecionado como um vergalhão
//Pegar o o ospedeiro do elemento
ElementId hostId = rebar.GetHostId();
Element hostEle = doc.GetElement(hostId);
//Pegar a vista ativa e criar um plano com base em sua origem e direção
View view = doc.ActiveView;
ViewType viewType = view.ViewType;
XYZ origem = view.Origin;
XYZ direcao = view.ViewDirection;
Plane plano = Plane.CreateByNormalAndOrigin(direcao, origem);
//Forma do vergalhão
ElementId shapeId = rebar.GetShapeId();
ElementType shape = doc.GetElement(shapeId) as ElementType;
//Cria o nome da família do item de detalhe, "Detalhe vergalhão 01", "Detalhe vergalhão 22", etc
String shapeName = "Detalhe vergalhão " + shape.Name;
//Dimensões do vergalhão, adicionar outras conforme for evoluindo, servirão para alterar a família de item de detalhe
Double dA = ele.LookupParameter("A").AsDouble();
Double dB = ele.LookupParameter("B").AsDouble();
using (Transaction trans = new Transaction(doc, "Criar elemento"))
{
trans.Start();
//Variável para guardar o sketchplane
SketchPlane sketchPlane;
//Pegar o SketchPlane de acordo com o tipo de vista, se for elevação ou corte o SketchPlane será a partir do plano criado anteriormente
if (viewType == ViewType.Elevation || viewType == ViewType.Section)
{
sketchPlane = SketchPlane.Create(doc, plano);
}
else
{
sketchPlane = view.SketchPlane;
}
//Define o SketchPlane da vista
view.SketchPlane = sketchPlane;
//Procura a família de item de detalhe com base no nome e ativa o mesmo
FilteredElementCollector collector = new FilteredElementCollector(doc);
IList <Element> symbols = collector.OfClass(typeof(FamilySymbol)).WhereElementIsElementType().ToElements();
FamilySymbol symbol = null;
foreach (Element elem in symbols)
{
if (elem.Name == shapeName)
{
symbol = elem as FamilySymbol;
break;
}
}
if (!symbol.IsActive)
{
symbol.Activate();
}
//Pega o ponto selecionado
XYZ pickedPoint = uidoc.Selection.PickPoint();
//Cria o item de detalhe no ponto e define seus parâmetros
FamilyInstance familyInstance = doc.Create.NewFamilyInstance(pickedPoint, symbol, view);
familyInstance.LookupParameter("A").Set(dA);
familyInstance.LookupParameter("B").Set(dB);
trans.Commit();
}
return(Result.Succeeded);
}
catch (Exception e)
{
message = e.Message;
return(Result.Failed);
}
}
public static System.Collections.Generic.List <string> GenerateResourceIdsForTableName(Element element, BuiltInCategory categoryId)
{
System.Collections.Generic.List <string> list = new System.Collections.Generic.List <string>();
ElementTypeEnum elementTypeEnum = (element is ElementType) ? ElementTypeEnum.SYMBOL : ElementTypeEnum.INSTANCE;
list.Add(string.Format("TabN_{0}_{1}", categoryId, elementTypeEnum));
BuiltInCategory builtInCategory = (BuiltInCategory)(-1);
bool flag = false;
FamilyInstance familyInstance = element as FamilyInstance;
if (familyInstance != null && familyInstance.Host != null)
{
builtInCategory = APIObjectList.GetCategoryId(familyInstance.Host);
flag = true;
}
else
{
LoadBase loadBase = element as LoadBase;
if (loadBase != null && loadBase.HostElement != null)
{
builtInCategory = APIObjectList.GetCategoryId(loadBase.HostElement);
flag = true;
}
else
{
Opening opening = element as Opening;
if (opening != null && opening.Host != null)
{
builtInCategory = APIObjectList.GetCategoryId(opening.Host);
list.Add(string.Format("TabN_{0}_{1}", "OST_Type_Opening", builtInCategory));
list.Add("TabN_Type_" + opening.GetType().FullName.Replace('.', '_'));
}
else
{
Rebar rebar = element as Rebar;
if (rebar != null && rebar.GetHostId() != ElementId.InvalidElementId)
{
builtInCategory = APIObjectList.GetCategoryId(rebar.GetHostId(), rebar.Document);
flag = true;
}
}
}
}
if (flag)
{
list.Add(string.Format("TabN_{0}_{1}", categoryId, builtInCategory));
}
if (element is RoomTag)
{
list.Add("TabN_Type_" + element.GetType().FullName.Replace('.', '_'));
}
if (element != null && element.Id.IntegerValue != -1)
{
if (element.LevelId != ElementId.InvalidElementId)
{
list.Add("TabN_CST_ElementLevel");
}
if (element.CreatedPhaseId != ElementId.InvalidElementId)
{
list.Add("TabN_CST_ElementPhase");
}
}
return(list);
}
