// Calculate Optical Flow Using Farne back Algorithm
public Image <Hsv, byte> CalculateOpticalFlow(Image <Gray, byte> prevFrame, Image <Gray, byte> nextFrame, int frameNumber = 0)
{
Image <Hsv, byte> coloredMotion = new Image <Hsv, byte>(nextFrame.Width, nextFrame.Height);//CalculateSections(nextFrame);
Image <Gray, float> velx = new Image <Gray, float>(new Size(prevFrame.Width, prevFrame.Height));
Image <Gray, float> vely = new Image <Gray, float>(new Size(prevFrame.Width, prevFrame.Height));
CvInvoke.CalcOpticalFlowFarneback(prevFrame, nextFrame, velx, vely, 0.5, 3, 60, 3, 5, 1.1, OpticalflowFarnebackFlag.Default);
prevFrame.Dispose();
for (int i = 0; i < coloredMotion.Width; i++)
{
for (int j = 0; j < coloredMotion.Height; j++)
{
// Pull the relevant intensities from the velx and vely matrices
double velxHere = velx[j, i].Intensity;
double velyHere = vely[j, i].Intensity;
// Determine the color (i.e, the angle)
double degrees = Math.Atan(velyHere / velxHere) / Math.PI * 90 + 45;
if (velxHere < 0)
{
degrees += 90;
}
//coloredMotion.Data[j, i, 0] = (Byte)degrees;
//coloredMotion.Data[j, i, 1] = 255;
// Determine the intensity (i.e, the distance)
double intensity = Math.Sqrt(velxHere * velxHere + velyHere * velyHere) * 10;
Point p1 = new Point(i, j);
Point p2 = ComputerSecondPoint(p1, degrees, intensity);
if (p1.X == p2.X && p1.Y == p2.Y)
{
continue;
}
if (intensity < 2) // if distance is smaller then ignore
//continue;
{
}
if (velxHere == 0 && velyHere == 0 && degrees == 0 && intensity == 0)
{
continue;
}
this.all_lines.Add(new FeatureVectorOpticalFlow(Math.Round(velxHere, 2), Math.Round(velyHere, 2), Math.Round(degrees, 2), Math.Round(intensity, 2), new LineSegment2D(p1, p2)));
//CvInvoke.Line(coloredMotion, p1, p2, new Bgr(Color.White).MCvScalar,1);
//coloredMotion.Data[j, i, 2] = (intensity > 255) ? (byte)255 : (byte)intensity;
}
}
// calculate the 9 sections and add each line to the list of respective section
coloredMotion = CalculateSections(coloredMotion, frameNumber);
//CvInvoke.Imwrite("C:\\Users\\Antivirus\\Desktop\\of\\opticalflow" + (frameNumber - 1) + "-" + (frameNumber) + ".png", coloredMotion);
//fs.Flush();
//fs.Close();
// coloredMotion is now an image that shows intensity of motion by lightness
// and direction by color.
//CvInvoke.Imshow("Lightness Motion", coloredMotion);
return(coloredMotion);
}
void ComputeDenseOpticalFlow()
{
velx = new Image <Gray, float>(_lastImage.Size);
vely = new Image <Gray, float>(_currentImage.Size);
Image <Gray, byte> result = _currentImage.CopyBlank();
CvInvoke.CalcOpticalFlowFarneback(_lastImage, _currentImage, velx, vely,
0.5, 3, 15, 3, 6, 1.3, 0);
DrawFarnerBackFlowMap(_inputImage, velx, vely, 1);
}
private void VisualizeDenseFlow_Means(ref double vmag, ref double vang)
{
Image <Gray, float> flowX = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> flowY = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> mag = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> ang = new Image <Gray, float>(currentGray.Size);
Image <Gray, byte> fullGray = new Image <Gray, byte>(currentImage.Size);
fullGray.SetValue(new Gray(255));
if (framesProcessed >= 2)
{
CvInvoke.CalcOpticalFlowFarneback(lastGray, currentGray, flowX, flowY, 0.5, 3, 50, 3, 5, 1.2, OpticalflowFarnebackFlag.Default);
CvInvoke.CartToPolar(flowX, flowY, mag, ang, true);
CvInvoke.Threshold(mag, mag, 4, float.MaxValue, ThresholdType.ToZero);
MCvScalar meanang = CvInvoke.Mean(ang.Mat, mag.Convert <Gray, byte>());
MCvScalar meanmag = CvInvoke.Mean(mag.Mat, mag.Convert <Gray, byte>());
vmag = meanmag.V0;
vang = meanang.V0;
if (vmag > 4)
{
if (minang > vang)
{
minang = vang;
}
if (maxang < vang)
{
maxang = vang;
}
}
CvInvoke.Normalize(mag, mag, 0, 255, NormType.MinMax);
CvInvoke.Normalize(ang, ang, 0, 255, NormType.MinMax);
Image <Hsv, byte> hsv = new Image <Hsv, byte>(new Image <Gray, byte>[] { ang.Convert <Gray, byte>(), fullGray, mag.Convert <Gray, byte>() });
double x = Math.Cos(vang * (Math.PI / 180.0));
double y = Math.Sin(vang * (Math.PI / 180.0));
CvInvoke.CvtColor(hsv, currentImage, ColorConversion.Hsv2Bgr);
currentImage.Erode(5);
currentImage.Dilate(5);
currentImage.Draw(new LineSegment2D(new Point(currentImage.Size.Width / 2, currentImage.Height / 2), new Point((int)(x * 100) + currentImage.Size.Width / 2, (int)(y * 100) + currentImage.Height / 2)), new Bgr(Color.Red), 2);
}
}
private static double CountDistanceThroughEdges(Mat leftEdges, Mat rightEdges, Rectangle roi,
double baseLine, double focalLengthPx)
{
if (roi == null)
{
return(-1);
}
Mat prev8bit = leftEdges;
Mat current8bit = rightEdges;
Image <Gray, byte> imageLeft = prev8bit.ToImage <Gray, byte>();
Image <Gray, byte> imageRight = current8bit.ToImage <Gray, byte>();
Image <Gray, float> flowX = new Image <Gray, float>(prev8bit.Width, prev8bit.Height);
Image <Gray, float> flowY = new Image <Gray, float>(prev8bit.Width, prev8bit.Height);
CvInvoke.CalcOpticalFlowFarneback(imageLeft, imageRight, flowX,
flowY, 0.5, 3, 25, 10, 5, 1.1, OpticalflowFarnebackFlag.FarnebackGaussian);
Mat magnitude = new Mat();
Mat angle = new Mat();
CvInvoke.CartToPolar(flowX.Mat, flowY.Mat, magnitude, angle);
int matWidth = magnitude.Width;
int matHeight = magnitude.Height;
float[] magData = new float[matWidth * matHeight];
magnitude.CopyTo(magData);
List <double> results = new List <double>();
for (int x = roi.X; x <= roi.X + roi.Width; x++)
{
for (int y = roi.Y; y <= roi.Y + roi.Height; y++)
{
float delta = GetElementFromArrayAsFromMatrix(magData, y, x, matWidth);
if (delta < epsilon)
{
continue;
}
double distance = (baseLine * focalLengthPx) / delta;
results.Add(distance);
}
}
if (results.Count == 0)
{
return(-1);
}
return(results.Average());
}
private void button11_Click(object sender, EventArgs e)
{
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
Image <Gray, Byte> last = null;
Image <Gray, float> flowX = null;
Image <Gray, float> flowY = null;
Image <Gray, byte> draw = null;
MKeyPoint[] keys;
Accord.Video.FFMPEG.VideoFileWriter wr = new Accord.Video.FFMPEG.VideoFileWriter();
VideoProcessig videoProcessig = new VideoProcessig(openFileDialog1.FileName, (map) =>
{
Image <Gray, Byte> image = new Image <Gray, byte>(map);
if (last == null)
{
last = image;
flowX = new Image <Gray, float>(map.Size);
flowY = new Image <Gray, float>(map.Size);
draw = new Image <Gray, byte>(map.Size);
wr.Open("result.avi", map.Width, map.Height);
return(map);
}
else
{
CvInvoke.CalcOpticalFlowFarneback(last, image, flowX, flowY, 0.5, 3, 10, 3, 5, 1.5, Emgu.CV.CvEnum.OpticalflowFarnebackFlag.Default);
last = image;
}
CvInvoke.AccumulateSquare(flowX, flowY);
CvInvoke.Canny(flowY.Convert <byte>(FloatToByte), draw, 40, 50);
var result = draw.Bitmap;
wr.WriteVideoFrame(result);
return(result);
});
videoProcessig.Show();
}
byte FloatToByte(float val)
{
return((byte)val);
}
}
private void button12_Click(object sender, EventArgs e)
{
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
Image <Gray, Byte> last = null;
Image <Gray, float> flowX = null;
Image <Gray, float> flowY = null;
Image <Gray, float> draw = null;
Vector3[,] val = Procedurs.Medium(openFileDialog1.FileName);
Morf morf = Morf.GenerateKMean(val, 5);
morf.RemoveEmptyRegions();
List <Vector3> avrs = new List <Vector3>();
for (int i = 0; i < morf.regions.Count; i++)
{
avrs.Add(morf.regions[i].GetAverage(val));
}
float[,] temp = new float[val.GetLength(0), val.GetLength(1)];
VideoProcessig videoProcessig = new VideoProcessig(openFileDialog1.FileName, (map) =>
{
val.WriteRGB(map);
Procedurs.MorfSubtract(morf, avrs, val, temp);
Image <Gray, byte> image = new Image <Gray, byte>(map.Size);
temp.RegMaximum();
for (int x = 0; x < map.Width; x++)
{
for (int y = 0; y < map.Height; y++)
{
Gray g = image[y, x];
g.Intensity = temp[x, y] * 255;
image[y, x] = g;
}
}
if (last == null)
{
last = image;
flowX = new Image <Gray, float>(map.Size);
flowY = new Image <Gray, float>(map.Size);
draw = new Image <Gray, float>(map.Size);
}
else
{
CvInvoke.CalcOpticalFlowFarneback(last, image, flowX, flowY, 0.5, 3, 10, 3, 5, 1.5, Emgu.CV.CvEnum.OpticalflowFarnebackFlag.Default);
last = image;
}
double max = 0;
for (int y = 0; y < map.Height; y++)
{
for (int x = 0; x < map.Width; x++)
{
Gray g = draw[y, x];
double value = Math.Abs(flowX[y, x].Intensity) + Math.Abs(flowY[y, x].Intensity);
max = Math.Max(value, max);
g.Intensity = value;
draw[y, x] = g;
}
}
for (int y = 0; y < map.Height; y++)
{
for (int x = 0; x < map.Width; x++)
{
Gray g = draw[y, x];
g.Intensity /= max;
g.Intensity *= 255;
draw[y, x] = g;
}
}
var result = draw.Bitmap;
return(result);
});
videoProcessig.Show();
}
}
private void UpdateTimer_Tick(object sender, EventArgs e)
{
if (
false &&
framesProcessed == 2)
{
updateTimer.Stop();
return;
}
double rho = 0.0;
double theta_deg = 0.0;
perfSw.Restart();
try
{
framesProcessed++;
//store last gray image, pull current image, convert to gray
lastGray = currentGray;
currentImage = capture.QueryFrame().ToImage <Bgr, Byte>();
Image <Gray, byte> grayImage = new Image <Gray, byte>(currentImage.Size);
CvInvoke.CvtColor(currentImage, grayImage, ColorConversion.Bgr2Gray);
//apply gaussian blur to gray to smooth out noise
CvInvoke.GaussianBlur(grayImage, grayImage, new Size(15, 15), 1.8);
currentGray = grayImage;
//create variables to store optical flow in cart and polar coordinates
Image <Gray, float> flowX = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> flowY = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> mag = new Image <Gray, float>(currentGray.Size);
Image <Gray, float> ang = new Image <Gray, float>(currentGray.Size);
//image with all values set to 255
Image <Gray, byte> fullGray = new Image <Gray, byte>(currentImage.Size);
fullGray.SetValue(new Gray(255));
//wait until second frame to get flow
if (framesProcessed >= 2)
{
int threshold = 2;
//get flow images
CvInvoke.CalcOpticalFlowFarneback(lastGray, currentGray, flowX, flowY, 0.5, 3, 20, 3, 5, 1.2, OpticalflowFarnebackFlag.Default);
//convert x and y flow to magnitude and angle images
CvInvoke.CartToPolar(flowX, flowY, mag, ang, true);
//threshold the magnitude so we only look at vectors with motion
CvInvoke.Threshold(mag, mag, threshold, 1.0, ThresholdType.Binary);
//find the total number of pixels in the image that are over the threshold value
MCvScalar sumMask = CvInvoke.Sum(mag);
//apply the mask to the flow vectors
flowX = flowX.Copy(mag.Convert <Gray, byte>());
flowY = flowY.Copy(mag.Convert <Gray, byte>());
//sum of flow vector components
MCvScalar sumX = CvInvoke.Sum(flowX);
MCvScalar sumY = CvInvoke.Sum(flowY);
double avgX = 0.0;
double avgY = 0.0;
//avg of flow vector components
if (sumMask.V0 > 0.0)
{
avgX = sumX.V0 / sumMask.V0;
avgY = sumY.V0 / sumMask.V0;
}
//convert to polar radius (rho) and angle (theta)
rho = Math.Sqrt(avgX * avgX + avgY * avgY);
double theta = Math.Atan2(avgY, avgX);
//convert angle from radians to degrees
theta_deg = theta * 180 / Math.PI;
//clamp values to bytes for HSV image visualization
CvInvoke.Normalize(mag, mag, 0, 255, NormType.MinMax);
CvInvoke.Normalize(ang, ang, 0, 255, NormType.MinMax);
//create hue/saturation/value image to visualize magnitude and angle of flow
Image <Hsv, byte> hsv = new Image <Hsv, byte>(new Image <Gray, byte>[] { ang.Convert <Gray, byte>(), fullGray, mag.Convert <Gray, byte>() });
//adding average flow components history
avgXHistory.Add(avgX);
avgYHistory.Add(avgY);
double rho_avg = 0.0;
double x_avg = 0.0;
double y_avg = 0.0;
int smoothLength = 3;
//get average angle in the history
if (avgXHistory.Count() > 0)
{
x_avg = avgXHistory.Median(smoothLength);
y_avg = avgYHistory.Median(smoothLength);
rho_avg = Math.Sqrt(x_avg * x_avg + y_avg * y_avg);
}
//convert hsv to bgr image for bitmap conversion
CvInvoke.CvtColor(hsv, currentImage, ColorConversion.Hsv2Bgr);
//draw instaneous average flow direction line if magnitude exceeds threshold
if (rho > threshold)
{
currentImage.Draw(new LineSegment2D(new Point(currentImage.Size.Width / 2, currentImage.Height / 2), new Point((int)(avgX * 10) + currentImage.Size.Width / 2, (int)(avgY * 10) + currentImage.Height / 2)), new Bgr(Color.Red), 2);
}
//draw historical average flow direction line
if (rho_avg > threshold)
{
currentImage.Draw(new LineSegment2D(new Point(currentImage.Size.Width / 2, currentImage.Height / 2), new Point((int)(x_avg * 10) + currentImage.Size.Width / 2, (int)(y_avg * 10) + currentImage.Height / 2)), new Bgr(Color.Blue), 2);
}
//pull bitmap from image and draw to picture box
currentBitmap = currentImage.Bitmap;
videoPictureBox.Image = currentBitmap;
}
}
catch (Exception exp)
{
MessageBox.Show(exp.Message + " " + exp.StackTrace);
}
perfSw.Stop();
fps = ((double)framesProcessed / fpsSw.Elapsed.TotalSeconds);
statusLabel.Text = framesProcessed.ToString() + " totalms: " + fpsSw.ElapsedMilliseconds.ToString() + " fps: " + ((double)framesProcessed / fpsSw.Elapsed.TotalSeconds).ToString() + " perfms: " + perfSw.ElapsedMilliseconds + " vmag: " + rho + " vang: " + theta_deg;
}
private void OpticalFlowEvent(ImageProcess sender, Mat mat)
{
if (cnt == 0)
{
//cnt ==0, clone mat for previous mat
prevMat = mat.Clone();
cnt++;
return;
}
Image <Emgu.CV.Structure.Gray, byte> prev_img = prevMat.ToImage <Emgu.CV.Structure.Gray, byte>();
Image <Emgu.CV.Structure.Gray, byte> curr_img = mat.ToImage <Emgu.CV.Structure.Gray, byte>();
Mat flow = new Mat(prev_img.Height, prev_img.Width, DepthType.Cv32F, 2);
CvInvoke.CalcOpticalFlowFarneback(prev_img, curr_img, flow, 0.5, 3, 15, 3, 6, 1.3, 0);
Mat[] flow_parts = new Mat[2];
flow_parts = flow.Split();
Mat magnitude = new Mat(), angle = new Mat(), magn_norm = new Mat();
CvInvoke.CartToPolar(flow_parts[0], flow_parts[1], magnitude, angle, true);
CvInvoke.Normalize(magnitude, magn_norm, 0.0, 1.0, NormType.MinMax);
/*
* //start drawing
* float factor = (float)((1.0 / 360.0) * (180.0 / 255.0));
* Mat colorAngle = angle * factor;
* //angle *= ((1f / 360f) * (180f / 255f));
* //build hsv image
* Mat[] _hsv= new Mat[3];
* Mat hsv = new Mat();
* Mat hsv8 = new Mat();
* Mat bgr = new Mat();
* _hsv[0] = colorAngle;
* _hsv[1] = Mat.Ones(colorAngle.Height,angle.Width,DepthType.Cv32F,1);
* _hsv[2] = magn_norm;
* VectorOfMat vm = new VectorOfMat(_hsv);
* CvInvoke.Merge(vm, hsv);
* hsv.ConvertTo(hsv8,DepthType.Cv8U, 255.0);
* CvInvoke.CvtColor(hsv8, bgr,ColorConversion.Hsv2Bgr);
* bgr.Save("opticalFlow.bmp");
*/
List <double> offset = CalculateDirection(angle, magn_norm);
Console.WriteLine(offset[0] + " , " + offset[1]);
//test direction
/*if( Math.Abs(offset[0]) >Math.Abs(offset[1]))
* {
*
* if (offset[0] > 0 )
* {
* Console.WriteLine("Right");
* }
* else
* {
* Console.WriteLine("Left");
* }
*
* }
* else
* {
*
* if (offset[1] > 0)
* {
* Console.WriteLine("Down");
* }
* else
* {
* Console.WriteLine("Up");
* }
*
* }*/
prevMat = mat.Clone();
}
private void Process(Mat frame)
{
var imageHSV = frame.ToImage <Hsv, byte>();
var imageRGB = frame.ToImage <Rgb, byte>();
var channels = imageRGB.Split();
var blue = channels[0];
var green = channels[1];
var red = channels[2];
//var colorSeparated = red - green; //red
//var colorSeparated = green - red; //blue
//var colorSeparated = blue - green; //purple
//var colorSeparated = blue - red; //blue
//var colorSeparated = red - blue; //yellow (!blue)
//var colorSeparated = green - blue; //green/yellow (!blue/!red)
//var colorSeparated = blue - ((red - blue) + (green - blue));
////blue colour by exclusion
var blue1 = (green - blue) + (red - blue);
blue1 = blue1.Not();
blue1 = blue1.ThresholdToZero(new Gray(250));
var blue2 = (green - red) + (blue - red);
blue2 = blue2.InRange(new Gray(80), new Gray(255));
var colorSeparated = blue1 & blue2;
//var green1 = green.InRange(new Gray(100), new Gray(255)) & blue.InRange(new Gray(0), new Gray(100)) & red.InRange(new Gray(0), new Gray(100));
//var colorSeparated = green1;
//var red1 = red - blue;
//var colorSeparated = red1;
var img = colorSeparated;
img = img.Erode(3);
img = img.Dilate(3);
img = img.SmoothGaussian(7);
img = img.Dilate(3);
img = img.Erode(3);
img = img.InRange(new Gray(50), new Gray(255));
var result = img.HoughCircles(new Gray(150), new Gray(50), 2.2, 50, 15, 120);
foreach (var circles in result)
{
foreach (var circle in circles)
{
img.Draw(circle, new Gray(255), 3);
}
}
//_viewers[1].Image = blue2;
//_viewers[2].Image = img;
var yellow1 = (green - blue) + (red - blue);
yellow1 = yellow1.Erode(5);
yellow1 = yellow1.Dilate(5);
yellow1 = yellow1.SmoothGaussian(7);
yellow1 = yellow1.Dilate(5);
yellow1 = yellow1.Erode(5);
yellow1 = yellow1.SmoothGaussian(7);
yellow1 = yellow1.ThresholdBinary(new Gray(120), new Gray(255));
//var lineSegments = yellow1.HoughLines(50, 250, 2.5, Math.PI / 45.0, 20, 30, 40);
//var segmentCount = 0;
//foreach (var lineSegment in lineSegments)
//{
// Rgb color;
// switch (segmentCount)
// {
// case 0:
// color = new Rgb(255, 0, 0);
// break;
// case 1:
// color = new Rgb(0, 255, 0);
// break;
// case 2:
// color = new Rgb(255, 255, 0);
// break;
// case 3:
// color = new Rgb(255, 0, 255);
// break;
// default:
// color = new Rgb(255, 255, 255);
// break;
// }
// foreach (var line in lineSegment)
// {
// imageRGB.Draw(line, color, 3, LineType.FourConnected);
// }
// segmentCount++;
//}
//using (var contoursDetected = new VectorOfVectorOfPoint())
//{
// CvInvoke.FindContours(
// yellow1,
// contoursDetected,
// null,
// RetrType.List,
// ChainApproxMethod.ChainApproxNone);
// var rects = new List<PointF[]>();
// for (var i = 0; i < contoursDetected.Size; i++)
// {
// using (var contour = contoursDetected[i])
// {
// using (var approxContour = new VectorOfPoint())
// {
// CvInvoke.ApproxPolyDP(
// contour,
// approxContour,
// CvInvoke.ArcLength(contour, true) * 0.05,
// true);
// var numberOfCorners = approxContour.Size;
// if (numberOfCorners == 4)
// {
// var contourArea = CvInvoke.ContourArea(approxContour);
// if (contourArea > 500)
// {
// var rect = new PointF[4];
// for (var cornerIndex = 0; cornerIndex < numberOfCorners; cornerIndex++)
// {
// rect[cornerIndex] = new PointF(approxContour[cornerIndex].X, approxContour[cornerIndex].Y);
// }
// rects.Add(rect);
// }
// }
// foreach (var rect in rects)
// {
// for (var cornerIndex = 0; cornerIndex < 4; cornerIndex++)
// {
// imageRGB.Draw(cornerIndex.ToString(), new Point((int)rect[cornerIndex].X, (int)rect[cornerIndex].Y), FontFace.HersheyPlain, 1.5D, new Rgb(Color.SpringGreen), 2);
// imageRGB.Draw(new CircleF(new PointF(rect[cornerIndex].X, rect[cornerIndex].Y), 5), new Rgb(Color.Magenta), 2);
// }
// var src = new[] { rect[0], rect[1], rect[2], rect[3] };
// var dst = new[] { new PointF(0, 0), new PointF(0, 400), new PointF(400, 400), new PointF(400, 0) };
// var tmp1 = new UMat();
// var matrix = CvInvoke.GetPerspectiveTransform(src, dst);
// CvInvoke.WarpPerspective(imageRGB, tmp1, matrix, new Size(400, 400));
// _viewers[2].Image = tmp1;
// }
// }
// }
// //var contoursArray = new List<Point[]>();
// //using (var currContour = contoursDetected[i])
// //{
// // var pointsArray = new Point[currContour.Size];
// // for (var j = 0; j < currContour.Size; j++)
// // {
// // pointsArray[j] = currContour[j];
// // }
// // contoursArray.Add(pointsArray);
// //}
// }
// //foreach (var contourPoints in contoursArray)
// //{
// // yellow1.Draw(contourPoints, new Gray(128), 3, LineType.FourConnected);
// //}
//}
var frameImage = frame.ToPipelineImage();
var frameOneColorImage = frameImage.IsolateColorBlackByAverage(80);
var scaleDownFactor = 5F;
var scaledDownFrameOneColorImage = frameOneColorImage.Resize(1D / scaleDownFactor, Inter.Cubic);
if (_scaledDownFrameOneColorImagePrev != null)
{
var horizontalWindowCount = 5;
var verticalWindowCount = 5;
var averageRegionFlow = new PointF[horizontalWindowCount, verticalWindowCount];
var flowResult = new Mat();
CvInvoke.CalcOpticalFlowFarneback(_scaledDownFrameOneColorImagePrev, scaledDownFrameOneColorImage, flowResult, 0.5, 3, 15, 5, 1, 1.2, OpticalflowFarnebackFlag.Default);
var flowResultChannels = flowResult.Split();
var flowResultX = flowResultChannels[0];
var flowResultY = flowResultChannels[1];
var flowWindowHeight = (float)Math.Ceiling(flowResult.Rows / (float)verticalWindowCount);
var flowWindowWidth = (float)Math.Ceiling(flowResult.Cols / (float)horizontalWindowCount);
var flowWindowVerticalIndexCounter = 0;
var flowWindowRowCounter = 0;
for (var r = 0; r < flowResult.Rows; r++)
{
var flowWindowHorizontalIndexCounter = 0;
var flowWindowColCounter = 0;
var horizontalLineFlowTotal = new PointF(0, 0);
for (var c = 0; c < flowResult.Cols; c++)
{
var xyValues = new float[2];
Marshal.Copy(flowResultX.DataPointer + (((r * flowResultX.Cols) + c) * flowResultX.ElementSize), xyValues, 0, 1);
Marshal.Copy(flowResultY.DataPointer + (((r * flowResultY.Cols) + c) * flowResultY.ElementSize), xyValues, 1, 1);
var xShift = xyValues[0];
var yShift = xyValues[1];
if (flowWindowColCounter >= flowWindowWidth || c == flowResult.Cols - 1)
{
averageRegionFlow[flowWindowHorizontalIndexCounter, flowWindowVerticalIndexCounter].X += horizontalLineFlowTotal.X;
averageRegionFlow[flowWindowHorizontalIndexCounter, flowWindowVerticalIndexCounter].Y += horizontalLineFlowTotal.Y;
horizontalLineFlowTotal = new PointF(0, 0);
flowWindowHorizontalIndexCounter++;
flowWindowColCounter = 0;
}
horizontalLineFlowTotal.X += xShift;
horizontalLineFlowTotal.Y += yShift;
flowWindowColCounter++;
}
if (flowWindowRowCounter >= flowWindowHeight || r == flowResult.Rows - 1)
{
flowWindowVerticalIndexCounter++;
flowWindowRowCounter = 0;
}
flowWindowRowCounter++;
}
for (var j = 0; j < verticalWindowCount; j++)
{
for (var i = 0; i < horizontalWindowCount; i++)
{
averageRegionFlow[i, j].X /= flowWindowHeight * flowWindowWidth;
averageRegionFlow[i, j].Y /= flowWindowHeight * flowWindowWidth;
var sx = (int)(i * flowWindowWidth + flowWindowWidth / 2);
var sy = (int)(j * flowWindowHeight + flowWindowHeight / 2);
imageRGB.Draw(new LineSegment2D(new Point(sx, sy), new Point(sx + (int)averageRegionFlow[i, j].X, sy + (int)averageRegionFlow[i, j].Y)), new Rgb(Color.LawnGreen), 2);
}
}
}
_scaledDownFrameOneColorImagePrev = scaledDownFrameOneColorImage;
//var featuresDetector = new Emgu.CV.Features2D.GFTTDetector();
//var kp = featuresDetector.Detect(frameOneColorImage);
//foreach (var keyPoint in kp)
//{
// frameOneColorImage.Draw(new Ellipse(keyPoint.Point, new SizeF(2, 2), 0), new Gray(255), 3);
//}
//var cornerImage = new Image<Gray, float>(yellow1.Size);
//yellow1.CornerHarris(yellow1, cornerImage, 11, 11, 0.05, BorderType.Reflect);
//cornerImage = cornerImage.ThresholdBinary(new Gray(0.005), new Gray(255));
//_viewers[1].Image = frameOneColorImageFiltered;
//for (var i = 0; i < 3; i++)
//{
// var img = channels[i] & mask;
// img = img.Erode(3);
// img = img.Dilate(3);
// img = img.Dilate(3);
// img = img.Erode(3);
// img = img.SmoothGaussian(7);
// var result = img.HoughCircles(new Gray(150), new Gray(50), 2.2, 50, 15, 100);
// foreach (var circles in result)
// {
// foreach (var circle in circles)
// {
// img.Draw(circle, new Gray(255), 3);
// }
// }
// _viewers[i].Image = img;
//}
}
// calculates the optical flow according to the Farneback algorithm
public Bitmap Dense_Optical_Flow(Bitmap bmp, OpticalFlowVariable optiVariables, Camera cam)
{
frameReduction = optiVariables.frameReduction < 1 ? 1 : optiVariables.frameReduction;
// frame becomes previous frame (i.e., prev_frame stores information about current frame)
prev_frame = matframe;
Image <Bgr, Byte> imageCV = new Image <Bgr, byte>(bmp); //Image Class from Emgu.CV
matframe = imageCV.Mat; //This is your Image converted to Mat
if (prev_frame == null)
{
return(bmp);
}
// frame_nr increment by number of steps given in textfield on user interface
frame_nr += 1;
// intialize this Image Matrix before resizing (see below), so it remains at original size
img_average_vectors = new Image <Bgr, byte>(matframe.Width, matframe.Height);
orig_height = matframe.Height;
Size n_size = new Size(matframe.Width / frameReduction,
matframe.Height / frameReduction);
// Resize frame and previous frame (smaller to reduce processing load)
//Source
Mat matFramDst = new Mat();
using (GpuMat gMatSrc = new GpuMat())
using (GpuMat gMatDst = new GpuMat()) {
gMatSrc.Upload(matframe);
Emgu.CV.Cuda.CudaInvoke.Resize(gMatSrc, gMatDst, new Size(0, 0), (double)1 / frameReduction, (double)1 / frameReduction);
gMatDst.Download(matFramDst);
}
matframe = matFramDst;
if (prev_frame.Height != matframe.Height)
{
return(bmp);
}
// images that are compared during the flow operations (see below)
// these need to be greyscale images
Image <Gray, Byte> prev_grey_img, curr_grey_img;
prev_grey_img = new Image <Gray, byte>(prev_frame.Width, prev_frame.Height);
curr_grey_img = new Image <Gray, byte>(matframe.Width, matframe.Height);
// Image arrays to store information of flow vectors (one image array for each direction, which is x and y)
Image <Gray, float> flow_x;
Image <Gray, float> flow_y;
flow_x = new Image <Gray, float>(matframe.Width, matframe.Height);
flow_y = new Image <Gray, float>(matframe.Width, matframe.Height);
// assign information stored in frame and previous frame in greyscale images (works without convert function)
CvInvoke.CvtColor(matframe, curr_grey_img, ColorConversion.Bgr2Gray);
CvInvoke.CvtColor(prev_frame, prev_grey_img, ColorConversion.Bgr2Gray);
// Apply Farneback dense optical flow
// parameters are the two greyscale images (these are compared)
// and two image arrays storing the flow information
// the results of the procedure are stored
// the rest of the parameters are:
// pryScale: specifies image scale to build pyramids: 0.5 means that each next layer is twice smaller than the former
// levels: number of pyramid levels: 1 means no extra layers
// winSize: the average window size; larger values = more robust to noise but more blur
// iterations: number of iterations at each pyramid level
// polyN: size of pixel neighbourhood: higher = more precision but more blur
// polySigma
// flags
CvInvoke.CalcOpticalFlowFarneback(prev_grey_img, curr_grey_img, flow_x, flow_y, 0.5, 3, 10, 3, 6, 1.3, 0);
// call function that shows results of Farneback algorithm
Image <Bgr, Byte> farnebackImg = Draw_Farneback_flow_map(matframe.ToImage <Bgr, Byte>(), flow_x, flow_y, optiVariables);// given in global variables section
// Release memory
prev_grey_img.Dispose();
curr_grey_img.Dispose();
flow_x.Dispose();
flow_y.Dispose();
//return farnebackImg.ToBitmap();
Image <Bgra, Byte> alphaImgShape = new Image <Bgra, byte>(imageCV.Size.Width, imageCV.Size.Height, new Bgra(0, 0, 0, .5));
CvInvoke.AddWeighted(alphaImgShape, .5, BlackTransparent(farnebackImg), .5, 0, alphaImgShape);
Mat alphaimg = new Mat();
CvInvoke.CvtColor(imageCV, alphaimg, ColorConversion.Bgr2Bgra);
if (CudaInvoke.HasCuda)
{
using (GpuMat gMatSrc = new GpuMat())
using (GpuMat gMatSrc2 = new GpuMat())
using (GpuMat gMatDst = new GpuMat()) {
gMatSrc.Upload(alphaimg);
gMatSrc2.Upload(alphaImgShape);
CudaInvoke.AlphaComp(gMatSrc, gMatSrc2, gMatDst, AlphaCompTypes.Plus);
gMatDst.Download(alphaimg);
}
return(alphaimg.Bitmap);
}
else
{
return(Overlay(imageCV, alphaImgShape).ToBitmap());
}
}
/// <summary>
/// get the motion influence map from the processed frames.
/// </summary>
/// <param name="vid">Path of the video.</param>
/// <param name="xBlockSize">Horizontal size of the block of the block.</param>
/// <param name="yBlockSize">Vertical size of the block of the block.</param>
/// <param name="noOfRowInBlock">'Number of rows of the mega grid.</param>
/// <param name="noOfColInBlock">Number of columns of the mega gird.</param>
/// <param name="total_frames">Total frames that we will process.</param>
/// <param name="clustering">Boolean to determinate wherher to cluster later or not</param>
/// <param name="frame_nr">Number of the starting frame.</param>
/// <returns>Motion influence map.</returns>
public List <double[][][]> get_motion_influence_map(String vid, out int xBlockSize, out int yBlockSize, out int noOfRowInBlock, out int noOfColInBlock, out int total_frames, bool clustering, int frame_nr = 0)
{
List <double[][][]> ret = new List <double[][][]>();
xBlockSize = 0;
yBlockSize = 0;
noOfRowInBlock = 0;
noOfColInBlock = 0;
total_frames = 0;
try
{
mag = new Mat();
ang = new Mat();
frame = new Mat();
prev_frame = new Mat();
cap = new VideoCapture(vid);
if (!clustering)
{
total_frames = 3;
}
else
{
total_frames = Convert.ToInt32(cap.GetCaptureProperty(CapProp.FrameCount));
}
cap.SetCaptureProperty(CapProp.PosFrames, frame_nr);
frame = cap.QueryFrame();
prev_frame = frame;
}
catch (NullReferenceException except)
{
Console.WriteLine(except.Message);
}
int mm = 0;
Console.WriteLine("Total Frames : {0}", total_frames);
while (mm < total_frames - 1)
{
Console.WriteLine("Frame : " + frame_nr);
prev_frame = frame;
frame_nr += 1;
cap.SetCaptureProperty(CapProp.PosFrames, frame_nr);
frame = cap.QueryFrame();
Image <Gray, Byte> prev_grey_img = new Image <Gray, byte>(frame.Width, frame.Height);
Image <Gray, Byte> curr_grey_img = new Image <Gray, byte>(frame.Width, frame.Height);
Image <Gray, float> flow_x = new Image <Gray, float>(frame.Width, frame.Height);
Image <Gray, float> flow_y = new Image <Gray, float>(frame.Width, frame.Height);
curr_grey_img = frame.ToImage <Gray, byte>();
prev_grey_img = prev_frame.ToImage <Gray, Byte>();
CvInvoke.CalcOpticalFlowFarneback(prev_grey_img, curr_grey_img, flow_x, flow_y, 0.5, 3, 15, 3, 6, 1.3, 0);
CvInvoke.CartToPolar(flow_x, flow_y, mag, ang);
OptFlowOfBlocks.calcOptFlowOfBlocks(mag, ang, curr_grey_img, out opFlowOfBlocks, out centreOfBlocks,
out rows, out cols, out noOfRowInBlock, out noOfColInBlock, out xBlockSize, out yBlockSize, out blockSize);
motionInMapGenerator(opFlowOfBlocks, blockSize, centreOfBlocks, xBlockSize, yBlockSize, out motionInfVal);
ret.Add(motionInfVal);
mm++;
}
return(ret);
}
// Optical Flow Implementation
public void OpticalFlow()
{
/* Image<Gray, byte> output = new Image<Gray, byte>(bgImage.Width, bgImage.Height);
* BackgroundSubtractorMOG2 bgsubtractor = new BackgroundSubtractorMOG2(varThreshold: 100, shadowDetection: false);
* bgsubtractor.Apply(bgImage, output);
* bgsubtractor.Apply(img, output);
*
* //output.Canny(100,100);
*
* CvInvoke.Erode(output, output, null, new System.Drawing.Point(-1, -1), 1, BorderType.Reflect, default(MCvScalar));
* CvInvoke.Dilate(output, output, null, new System.Drawing.Point(-1, -1), 5, BorderType.Reflect, default(MCvScalar));
*
* // finding the Bounding Box of the Person
* frm = new PersonFrame();
* Rectangle rec = frm.findBoundry(output);
* //output.ROI = rec;
* pictureViewBox.Image = output;*/
// prep containers for x and y vectors
Image <Gray, float> velx = new Image <Gray, float>(new Size(img.Width, img.Height));
Image <Gray, float> vely = new Image <Gray, float>(new Size(img.Width, img.Height));
///previousFrame.ROI = rec;
//nextFrame.ROI = rec;
// use the optical flow algorithm.
CvInvoke.CalcOpticalFlowFarneback(previousFrame, nextFrame, velx, vely, 0.5, 3, 60, 3, 5, 1.1, OpticalflowFarnebackFlag.Default);
//spictureViewBox.Image = flowMatrix;
// color each pixel
Image <Hsv, Byte> coloredMotion = new Image <Hsv, Byte>(new Size(img.Width, img.Height));
for (int i = 0; i < coloredMotion.Width; i++)
{
for (int j = 0; j < coloredMotion.Height; j++)
{
// Pull the relevant intensities from the velx and vely matrices
double velxHere = velx[j, i].Intensity;
double velyHere = vely[j, i].Intensity;
// Determine the color (i.e, the angle)
double degrees = Math.Atan(velyHere / velxHere) / Math.PI * 90 + 45;
if (velxHere < 0)
{
degrees += 90;
}
coloredMotion.Data[j, i, 0] = (Byte)degrees;
coloredMotion.Data[j, i, 1] = 255;
// Determine the intensity (i.e, the distance)
double intensity = Math.Sqrt(velxHere * velxHere + velyHere * velyHere) * 10;
coloredMotion.Data[j, i, 2] = (intensity > 255) ? (byte)255 : (byte)intensity;
}
}
// coloredMotion is now an image that shows intensity of motion by lightness
// and direction by color.
pictureViewBox.Image = coloredMotion;
previousFrame.Dispose();
previousFrame = img.Clone();
img.Dispose();
nextFrame.Dispose();
coloredMotion.Dispose();
}