public ActionResult getGasketCalc(int gasketId)
{
string errorTxt = "";
if (Session["ident"] == null)
{
RedirectToAction("Login", "Home");
}
string ident = Session["ident"].ToString();
CGasket model = new CGasket();
SmManager.SmManagerClient cl = new SmManager.SmManagerClient();
SmManager.gWorkingCostCL workingCost = cl.getWorkingCosts(ident);
if (gasketId > 0)
{
SmManager.gGasketCL[] gasket = cl.getGasket(ident, gasketId);
ViewBag.gasket = gasket[0];
}
// Get all material from db
ViewBag.errorTxt = errorTxt;
ViewBag.workingCost = workingCost;
return(View());
}
public ActionResult selectGasket(int gasketId)
{
string errorTxt = "";
if (Session["ident"] == null)
{
RedirectToAction("Login", "Home");
}
string ident = Session["ident"].ToString();
CGasket model = new CGasket();
SmManager.SmManagerClient cl = new SmManager.SmManagerClient();
SmManager.gWorkingCostCL workingCost = cl.getWorkingCosts(ident);
model.cuttingMargin = workingCost.cuttingMargin.ToString();
model.price = "0";
model.Type2SecHoleCount = 0;
model.Type2SecHoleDiam = "0";
//model.Type3GasketLength = "0";
//model.Type3GasketWidth = "0";
//string saveInnerDiam = "0";
if (gasketId > 0)
{
SmManager.gGasketCL[] gasket = cl.getGasket(ident, gasketId);
if (gasket.Length == 1)
{
if (gasket[0].ErrCode != 0)
{
errorTxt = gasket[0].ErrMessage;
}
else
{
model.gasketId = gasket[0].gasketId;
model.gasketTypeId = gasket[0].gasketTypeId;
model.materialThicknId = gasket[0].materialThicknId;
model.outerDiam = gasket[0].outerDiam.ToString();
model.innerDiam = gasket[0].innerDiam.ToString();
//saveInnerDiam = gasket[0].innerDiam.ToString();
model.reusableMaterial = gasket[0].reusableMaterial.ToString();
model.cuttingMargin = gasket[0].cuttingMargin.ToString();
model.standardPriceProduct = gasket[0].standardPriceProduct;
model.handlingTime = gasket[0].handlingTime.ToString();
model.Type2SecHoleCount = gasket[0].Type2SecHoleCount;
model.Type2SecHoleDiam = gasket[0].Type2SecHoleCount.ToString();
model.Type3GasketLength = gasket[0].Type3GasketLength.ToString();
model.Type3GasketWidth = gasket[0].Type3GasketWidth.ToString();
model.price = gasket[0].price.ToString();
model.note = gasket[0].note;
model.description = gasket[0].description;
model.materialCostMm2 = gasket[0].materialCostMm2;
model.materialMarginPercent = gasket[0].materialMarginPercent;
model.cuttingLengthOuterMm = gasket[0].cuttingLengthOuterMm;
model.cuttingLengthInnerMm = gasket[0].cuttingLengthInnerMm;
model.cuttingSpeedMSek = gasket[0].cuttingSpeedMmSek;
model.materialArea = gasket[0].materialArea;
}
}
else
{
errorTxt = "Kan ej hitta vald packning";
}
}
// Get all material from db
SmManager.gMaterialThicknCL[] materialThickns = cl.getMaterialThickn(ident, 0);
List <SmManager.gMaterialThicknCL> materialThicknsList = materialThickns.Cast <SmManager.gMaterialThicknCL>().ToList();
materialThicknsList = materialThicknsList.OrderBy(x => x.materialName).ThenBy(x => x.materialSize).ThenBy(x => x.description).ToList();
List <CDropDown> ddList = new List <CDropDown>();
foreach (SmManager.gMaterialThicknCL matThickn in materialThicknsList)
{
CDropDown dd = new CDropDown();
dd.Id = matThickn.materialThicknId;
dd.Name = matThickn.materialName + " " + matThickn.materialSize + " " + matThickn.description;
ddList.Add(dd);
}
ViewBag.ddList = new SelectList(ddList, "Id", "Name");
ViewBag.errorTxt = errorTxt;
ViewBag.workingCost = workingCost;
// 2018-08-29 KJBO
KeyValuePair <int, string>[] gasketTypeL = cl.getGasketType(ident);
List <KeyValuePair <int, string> > gasketTypeList = gasketTypeL.Cast <KeyValuePair <int, string> >().ToList();
ViewBag.gasketTypeList = new SelectList(gasketTypeList, "Key", "Value");
return(View(model));
}
public JsonResult saveGasket(CGasket model)
{
string message = "";
string ErrMessage = "";
int ErrCode = 0;
int gasketId = 0;
int gasketTypeId = 0;
if (Session["ident"] == null)
{
message = "identError";
}
if (message == "")
{
string ident = Session["ident"].ToString();
SmManager.gGasketCL gasket = new SmManager.gGasketCL();
CMaterialSize ms = new CMaterialSize();
Decimal outerDiam = 0;
Decimal innerDiam = 0;
Decimal reusableMaterial = 0;
Decimal cuttingMargin = 0;
Decimal handlingTime = 0;
Decimal price = 0;
Decimal Type2SecHoleDiam = 0;
// 2019-09-05
Decimal Type3GasketLength = 0;
Decimal Type3GasketWidth = 0;
if (model.price == "")
{
model.price = "0";
}
if (model.gasketTypeId == 1 || model.gasketTypeId == 2)
{
if (!ms.fromStrToDec(model.outerDiam, ref outerDiam, 0.01M, 100000))
{
message = "Ytterdiameter måste vara större än 0 (och mindre än 100000)";
}
}
if (message == "")
{
if (!ms.fromStrToDec(model.innerDiam, ref innerDiam, 0.01M, 100000))
{
message = "Innerdiameter måste vara större än 0 (och mindre än 100000)";
}
}
if (message == "" && (model.gasketTypeId == 1 || model.gasketTypeId == 2))
{
if (innerDiam >= outerDiam)
{
message = "Innerdiameter måste vara mindre än ytterdiameter";
}
}
if (message == "")
{
if (!ms.fromStrToDec(model.reusableMaterial, ref reusableMaterial, 0, 95))
{
message = "Återanvändbart material bör vara mellan 0 och 95%";
}
}
if (message == "")
{
if (!ms.fromStrToDec(model.cuttingMargin, ref cuttingMargin, 0, 100))
{
message = "Felaktig skärmarginal";
}
}
if (message == "")
{
if (!ms.fromStrToDec(model.handlingTime, ref handlingTime, 0, 100000))
{
message = "Felaktig hanteringstid";
}
}
if (message == "")
{
if (!ms.fromStrToDec(model.price, ref price, 0, 1000000))
{
message = "Felaktigt pris";
}
}
if (message == "")
{
if (model.gasketTypeId == 2 && model.Type2SecHoleCount == 0)
{
message = "Antal yttre hål måste vara större än 0";
}
}
if (message == "")
{
if (model.gasketTypeId == 2 || (model.gasketTypeId == 3 && model.Type2SecHoleCount > 0))
{
if (!ms.fromStrToDec(model.Type2SecHoleDiam, ref Type2SecHoleDiam, 0.01M, 100000))
{
message = "Felaktigt angiven diameter på yttre hål";
}
}
}
if (message == "")
{
if (model.gasketTypeId == 3)
{
if (!ms.fromStrToDec(model.Type3GasketLength, ref Type3GasketLength, 0.01M, 100000))
{
message = "Packningens längd måste vara större än 0 (och mindre än 100000)";
}
if (!ms.fromStrToDec(model.Type3GasketWidth, ref Type3GasketWidth, 0.01M, 100000))
{
message = "Packningens bredd måste vara större än 0 (och mindre än 100000)";
}
}
}
if (message == "" && model.gasketTypeId == 3)
{
if (Type3GasketLength <= innerDiam)
{
message = "Packningens längd måste vara större än innerdiametern";
}
}
if (message == "" && model.gasketTypeId == 3)
{
if (Type3GasketWidth <= innerDiam)
{
message = "Packningens bredd måste vara större än innerdiametern";
}
}
if (message == "")
{
gasket.gasketId = model.gasketId;
gasket.gasketTypeId = model.gasketTypeId;
gasket.materialThicknId = model.materialThicknId;
gasket.outerDiam = outerDiam;
gasket.innerDiam = innerDiam;
gasket.reusableMaterial = reusableMaterial;
gasket.cuttingMargin = cuttingMargin;
gasket.standardPriceProduct = model.standardPriceProduct;
gasket.handlingTime = handlingTime;
gasket.Type2SecHoleCount = model.Type2SecHoleCount;
gasket.Type2SecHoleDiam = Type2SecHoleDiam;
// 2019-09-05 KJBO
if (model.gasketTypeId == 3)
{
gasket.Type3GasketLength = Type3GasketLength;
gasket.Type3GasketWidth = Type3GasketWidth;
}
gasket.price = price;
gasket.note = model.note;
gasket.description = model.description;
SmManager.SmManagerClient cl = new SmManager.SmManagerClient();
gasket = cl.saveGasket(ident, gasket);
ErrMessage = gasket.ErrMessage;
ErrCode = gasket.ErrCode;
gasketId = gasket.gasketId;
gasketTypeId = gasket.gasketTypeId;
}
}
return(Json(new
{
message = message,
errMessage = ErrMessage,
errCode = ErrCode.ToString(),
gasketId = gasketId,
gasketTypeId = gasketTypeId
}, JsonRequestBehavior.AllowGet));
}
/// <summary>
/// Return a keyValue list of available gasket types
/// If the list exists of only one row then the
/// calling problem shall investigate if the first (int)
/// value is negative. This indicates an error and the
/// error message is returned in the string part
/// </summary>
/// <param name="ident"></param>
/// <returns></returns>
/// 2018-08-29 KJBO
public List <KeyValuePair <int, string> > getGasketType(string ident)
{
CGasket g = new CGasket();
return(g.getGasketType(ident));
}
/// <summary>
/// Delete a registered gasket
/// </summary>
/// <param name="ident"></param>
/// <param name="gasketId"></param>
/// <returns>Error class.</returns>
/// 2018-08-21 KJBO Indentive AB
public ErrorCL deleteGasket(string ident, int gasketId)
{
CGasket g = new CGasket();
return(g.deleteGasket(ident, gasketId));
}
/// <summary>
/// Validates and saves a gasket to the database
/// Always check ErrCode and ErrMessage for errors
/// Returns the new created gasket
/// </summary>
/// <param name="ident"></param>
/// <param name="gasket"></param>
/// <returns></returns>
/// 2018-08-17 KJBO
public gGasketCL saveGasket(string ident, gGasketCL gasket)
{
CGasket g = new CGasket();
return(g.saveGasket(ident, gasket));
}
/// <summary>
/// Returns all gaskets or just one
/// If gasketId = 0 all registered gasket will be returned
/// if gasketId > 0 then the gasket with that primary key
/// will be returned.
/// If a gasket id is provided and this gasket don't exists
/// then the errorCode will return -100 and the calling program
/// needs to take the correct action.
/// </summary>
/// <param name="ident"></param>
/// <param name="gasketId"></param>
/// <returns></returns>
/// 2018-08-17 kjbo
public List <gGasketCL> getGasket(string ident, int gasketId)
{
CGasket g = new CGasket();
return(g.getGasket(ident, gasketId));
}
