private void butOK_Click(object sender, System.EventArgs e)
{
RepeatCharge[] chargeList = RepeatCharges.Refresh(0); //Gets all repeating charges for all patients, they may be disabled
int countAdded = 0;
int claimsAdded = 0;
DateTime startDate;
Procedure proc;
for (int i = 0; i < chargeList.Length; i++)
{
if (!chargeList[i].IsEnabled) //first make sure it is not disabled
{
continue;
}
if (chargeList[i].DateStart > DateTime.Today) //not started yet
{
continue;
}
//if(chargeList[i].DateStop.Year>1880//not blank
// && chargeList[i].DateStop<DateTime.Today)//but already ended
//{
// continue;
//}
//get a list dates of all completed procedures with this Code and patNum
ArrayList ALdates = RepeatCharges.GetDates(ProcedureCodes.GetCodeNum(chargeList[i].ProcCode), chargeList[i].PatNum);
startDate = chargeList[i].DateStart;
//This is the repeating date using the old methodology. It is necessary for checking if the repeating procedure was already added using the old methodology.
DateTime possibleDateOld = startDate;
//This is a more accurate repeating date which will allow procedures to be added on the 28th and later.
DateTime possibleDateNew = startDate;
int countMonths = 0;
//start looping through possible dates, beginning with the start date of the repeating charge
while (possibleDateNew <= DateTime.Today)
{
//Only allow back dating up to one month and 20 days.
if (possibleDateNew < DateTime.Today.AddDays(-50))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue; //don't go back more than one month and 20 days
}
//check to see if the possible date is present in the list
if (ALdates.Contains(possibleDateNew) ||
ALdates.Contains(possibleDateOld))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue;
}
if (chargeList[i].DateStop.Year > 1880 && //not blank
chargeList[i].DateStop < possibleDateNew) //but already ended
{
break;
}
//otherwise, insert a procedure to db
proc = new Procedure();
proc.CodeNum = ProcedureCodes.GetCodeNum(chargeList[i].ProcCode);
proc.DateEntryC = DateTimeOD.Today;
proc.PatNum = chargeList[i].PatNum;
proc.ProcDate = possibleDateNew;
proc.DateTP = possibleDateNew;
proc.ProcFee = chargeList[i].ChargeAmt;
proc.ProcStatus = ProcStat.C;
proc.ProvNum = PrefC.GetLong(PrefName.PracticeDefaultProv);
proc.MedicalCode = ProcedureCodes.GetProcCode(proc.CodeNum).MedicalCode;
proc.BaseUnits = ProcedureCodes.GetProcCode(proc.CodeNum).BaseUnits;
proc.DiagnosticCode = PrefC.GetString(PrefName.ICD9DefaultForNewProcs);
//Check if the repeating charge has been flagged to copy it's note into the billing note of the procedure.
if (chargeList[i].CopyNoteToProc)
{
proc.BillingNote = chargeList[i].Note;
}
Procedures.Insert(proc); //no recall synch needed because dental offices don't use this feature
countAdded++;
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
if (chargeList[i].CreatesClaim && !ProcedureCodes.GetProcCode(chargeList[i].ProcCode).NoBillIns)
{
List <PatPlan> patPlanList = PatPlans.Refresh(chargeList[i].PatNum);
List <InsSub> subList = InsSubs.RefreshForFam(Patients.GetFamily(chargeList[i].PatNum));
List <InsPlan> insPlanList = InsPlans.RefreshForSubList(subList);;
List <Benefit> benefitList = Benefits.Refresh(patPlanList, subList);
Claim claimCur;
List <Procedure> procCurList = new List <Procedure>();
procCurList.Add(proc);
if (patPlanList.Count == 0) //no current insurance, do not create a claim
{
continue;
}
//create the claimprocs
Procedures.ComputeEstimates(proc, proc.PatNum, new List <ClaimProc>(), true, insPlanList, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
//get claimprocs for this proc, may be more than one
List <ClaimProc> claimProcList = ClaimProcs.GetForProc(ClaimProcs.Refresh(proc.PatNum), proc.ProcNum);
string claimType = "P";
if (patPlanList.Count == 1 && PatPlans.GetOrdinal(PriSecMed.Medical, patPlanList, insPlanList, subList) > 0) //if there's exactly one medical plan
{
claimType = "Med";
}
claimCur = CreateClaim(claimType, patPlanList, insPlanList, claimProcList, proc, subList);
claimProcList = ClaimProcs.Refresh(proc.PatNum);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
if (PatPlans.GetOrdinal(PriSecMed.Secondary, patPlanList, insPlanList, subList) > 0 && //if there exists a secondary plan
!CultureInfo.CurrentCulture.Name.EndsWith("CA")) //and not canada (don't create secondary claim for canada)
{
claimCur = CreateClaim("S", patPlanList, insPlanList, claimProcList, proc, subList);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
claimProcList = ClaimProcs.Refresh(proc.PatNum);
claimCur.ClaimStatus = "H";
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
}
}
}
}
//MessageBox.Show(countAdded.ToString()+" "+Lan.g(this,"procedures added."));
MessageBox.Show(countAdded.ToString() + " " + Lan.g(this, "procedures added.") + "\r\n" + claimsAdded.ToString() + " " + Lan.g(this, "claims added."));
DialogResult = DialogResult.OK;
}
private void butNewClaims_Click(object sender, EventArgs e)
{
if (gridMain.SelectedIndices.Length == 0) //No selections made.
{
MsgBox.Show(this, "Please select at least one procedure.");
return;
}
if (!ClaimL.CheckClearinghouseDefaults())
{
return;
}
//Ignore date lock for now, we just want to check the general permission for the button.
if (!Security.IsAuthorized(Permissions.NewClaimsProcNotBilled, DateTime.Today))
{
return;
}
//Generate List and Table----------------------------------------------------------------------------------------------------------------------
//List of all procedures being shown.
//Pulls procedures based off of the PatNum, if the row was selected in gridMain and if it has been attached to a claim.
List <ProcNotBilled> listNotBilledProcs = new List <ProcNotBilled>();
List <long> listPatNums = new List <long>();
Patient patOld = new Patient();
List <Claim> listPatClaims = new List <Claim>();
List <ClaimProc> listPatClaimProcs = new List <ClaimProc>();
List <ClaimProc> listCurClaimProcs = new List <ClaimProc>();
//find the date user is restricted by for this permission so it doesn't get called in a loop. General permission was already checked.
DateTime dateRestricted = GroupPermissions.GetDateRestrictedForPermission(Permissions.NewClaimsProcNotBilled,
Security.CurUser.GetGroups(true).Select(x => x.UserGroupNum).ToList());
//Table rows need to be 1:1 with gridMain rows due to logic in ContrAccount.toolBarButIns_Click(...).
DataTable table = new DataTable();
//Required columns as mentioned by ContrAccount.toolBarButIns_Click().
table.Columns.Add("ProcNum");
table.Columns.Add("chargesDouble");
table.Columns.Add("ProcNumLab");
List <long> listProcNumsPastLockDate = new List <long>();
for (int i = 0; i < gridMain.ListGridRows.Count; i++) //Loop through every row in gridMain to construct datatable and listNotBilledProcs.
//Table is passed to toolBarButIns_Click(...) and must contain data for every row in the grid.
{
DataRow rowCur = (DataRow)gridMain.ListGridRows[i].Tag;
long procNumCur = PIn.Long(rowCur["ProcNum"].ToString());
Procedure procCur = Procedures.GetOneProc(procNumCur, false);
if (procCur.ProcDate <= dateRestricted) //current procedure is past or on the lock date.
{
listProcNumsPastLockDate.Add(procNumCur);
}
long patNumCur = procCur.PatNum;
if (patOld.PatNum != patNumCur) //Procedures in gridMain are ordered by patient, so when the patient changes, we know previous patient is complete.
{
listPatClaims = Claims.Refresh(patNumCur);
listPatClaimProcs = ClaimProcs.Refresh(patNumCur);
patOld = Patients.GetPat(procCur.PatNum);
}
listCurClaimProcs = ClaimProcs.GetForProc(listPatClaimProcs, procNumCur);
bool hasPriClaim = false;
bool hasSecClaim = false;
for (int j = 0; j < listCurClaimProcs.Count; j++)
{
ClaimProc claimProcCur = listCurClaimProcs[j];
if (claimProcCur.ClaimNum > 0 && claimProcCur.Status != ClaimProcStatus.Preauth && claimProcCur.Status != ClaimProcStatus.Estimate)
{
Claim claimCur = Claims.GetFromList(listPatClaims, claimProcCur.ClaimNum);
switch (claimCur.ClaimType)
{
case "P":
hasPriClaim = true;
break;
case "S":
hasSecClaim = true;
break;
}
}
}
bool isSelected = gridMain.SelectedIndices.Contains(i);
listNotBilledProcs.Add(new ProcNotBilled(patOld, procNumCur, i, isSelected, hasPriClaim, hasSecClaim, procCur.ClinicNum, procCur.PlaceService));
DataRow row = table.NewRow();
row["ProcNum"] = procNumCur;
#region Calculate chargesDouble
double writeOffCapSum = listPatClaimProcs.Where(x => x.Status == ClaimProcStatus.CapComplete).Sum(y => y.WriteOff);
row["chargesDouble"] = procCur.ProcFeeTotal - writeOffCapSum;
row["ProcNumLab"] = procCur.ProcNumLab;
#endregion Calculate chargesDouble
table.Rows.Add(row);
if (listPatNums.Contains(patNumCur))
{
continue;
}
listPatNums.Add(patNumCur);
}
List <List <ProcNotBilled> > listGroupedProcs = new List <List <ProcNotBilled> >();
Patient patCur = null;
List <PatPlan> listPatPlans = null;
List <InsSub> listInsSubs = null;
List <InsPlan> listInsPlans = null;
List <Procedure> listPatientProcs = null;
ProcNotBilled procNotBilled = new ProcNotBilled(); //When automatically grouping, this is used as the procedure to group by.
long patNumOld = 0;
int claimCreatedCount = 0;
int patIndex = 0;
//The procedures show in the grid ordered by patient. Also listPatNums contains unique patnums which are in the same order as the grid.
while (patIndex < listPatNums.Count)
{
List <ProcNotBilled> listProcs = listNotBilledProcs.Where(x => x.Patient.PatNum == listPatNums[patIndex] && x.IsRowSelected && !x.IsAttached &&
!x.ProcNum.In(listProcNumsPastLockDate)).ToList();
if (listProcs.Count == 0)
{
patNumOld = listPatNums[patIndex];
patIndex++; //No procedures were selected for this patient.
continue;
}
else
{
//Maintain the same patient, in order to create one or more additional claims for the remaining procedures.
//Currently will only happen for specific instances;
//--Canadian customers who are attempting to create a claim with over 7 procedures.
//--When checkAutoGroupProcs is checked and when there are multiple procedure groupings by GroupKey status, ClinicNum, and placeService.
}
if (patNumOld != listPatNums[patIndex]) //The patient could repeat if we had to group the procedures for the patinet into multiple claims.
{
patCur = Patients.GetPat(listPatNums[patIndex]);
listPatPlans = PatPlans.Refresh(patCur.PatNum);
listInsSubs = InsSubs.RefreshForFam(Patients.GetFamily(patCur.PatNum));
listInsPlans = InsPlans.RefreshForSubList(listInsSubs);
listPatientProcs = Procedures.Refresh(patCur.PatNum);
}
if (checkAutoGroupProcs.Checked) //Automatically Group Procedures.
{
procNotBilled = listProcs[0];
//Update listProcs to reflect those that match the procNotBilled values.
listProcs = listProcs.FindAll(x => x.HasPriClaim == procNotBilled.HasPriClaim && x.HasSecClaim == procNotBilled.HasSecClaim);
if (PrefC.HasClinicsEnabled) //Group by clinic only if clinics enabled.
{
listProcs = listProcs.FindAll(x => x.ClinicNum == procNotBilled.ClinicNum);
}
else if (!PrefC.GetBool(PrefName.EasyHidePublicHealth)) //Group by Place of Service only if Public Health feature is enabled.
{
listProcs = listProcs.FindAll(x => x.PlaceService == procNotBilled.PlaceService);
}
}
GetUniqueDiagnosticCodes(listProcs, listPatientProcs, listPatPlans, listInsSubs, listInsPlans);
if (listProcs.Count > 7 && CultureInfo.CurrentCulture.Name.EndsWith("CA")) //Canadian. en-CA or fr-CA
{
listProcs = listProcs.Take(7).ToList(); //Returns first 7 items of the list.
}
listProcs.ForEach(x => x.IsAttached = true); //This way we can not attach procedures to multiple claims thanks to the logic above.
if (listProcs.Any(x => listProcs[0].PlaceService != x.PlaceService) || listProcs.Any(x => listProcs[0].ClinicNum != x.ClinicNum))
{
//Regardless if we are automatically grouping or not,
//if all procs in our list at this point do not share the same PlaceService or ClinicNum then claims will not be made.
}
else //Basic validation passed.
{
if (!listProcs[0].HasPriClaim && //Medical claim.
PatPlans.GetOrdinal(PriSecMed.Medical, listPatPlans, listInsPlans, listInsSubs) > 0 && //Has medical ins.
PatPlans.GetOrdinal(PriSecMed.Primary, listPatPlans, listInsPlans, listInsSubs) == 0 && //Does not have primary dental ins.
PatPlans.GetOrdinal(PriSecMed.Secondary, listPatPlans, listInsPlans, listInsSubs) == 0) //Does not have secondary dental ins.
{
claimCreatedCount++;
}
else //Not a medical claim.
{
if (!listProcs[0].HasPriClaim && PatPlans.GetOrdinal(PriSecMed.Primary, listPatPlans, listInsPlans, listInsSubs) > 0) //Primary claim.
{
claimCreatedCount++;
}
if (!listProcs[0].HasSecClaim && PatPlans.GetOrdinal(PriSecMed.Secondary, listPatPlans, listInsPlans, listInsSubs) > 0) //Secondary claim.
{
claimCreatedCount++;
}
}
}
listGroupedProcs.Add(listProcs);
}
if (claimCreatedCount <= 0 && listProcNumsPastLockDate.Count > 0) //No claims can be created because of the lock date.
{
MsgBox.Show(this, "No claims can be created because all procedure dates extend past the lock date for this report.");
return;
}
if (!MsgBox.Show(this, true, "Clicking OK will create up to " + POut.Int(claimCreatedCount)
+ " claims and cannot be undone, except by manually going to each account. "
+ "Some claims may not be created if there are validation issues.\r\n"
+ "Click OK to continue, otherwise click Cancel."))
{
return;
}
//Create Claims--------------------------------------------------------------------------------------------------------------------------------
claimCreatedCount = 0;
string claimErrors = "";
foreach (List <ProcNotBilled> listProcs in listGroupedProcs)
{
patCur = listProcs[0].Patient;
gridMain.SetSelected(false); //Need to deslect all rows each time so that ContrAccount.toolBarButIns_Click(...) only uses pertinent rows.
for (int j = 0; j < listProcs.Count; j++)
{
gridMain.SetSelected(listProcs[j].RowIndex, true); //Select the pertinent rows so that they will be attached to the claim below.
}
int[] arraySelectedIndices = (int[])gridMain.SelectedIndices.Clone();
CreateClaimDataWrapper createClaimDataWrapper = ClaimL.GetCreateClaimDataWrapper(patCur, Patients.GetFamily(patCur.PatNum)
, ClaimL.GetCreateClaimItems(table, arraySelectedIndices), false);
createClaimDataWrapper = ClaimL.CreateClaimFromWrapper(false, createClaimDataWrapper, procNotBilled.HasPriClaim, procNotBilled.HasSecClaim);
string errorTitle = patCur.PatNum + " " + patCur.GetNameLFnoPref() + " - ";
if (patNumOld == patCur.PatNum && !string.IsNullOrEmpty(createClaimDataWrapper.ErrorMessage))
{
claimErrors += "\t\t" + createClaimDataWrapper.ErrorMessage + "\r\n";
}
else if (!string.IsNullOrEmpty(createClaimDataWrapper.ErrorMessage))
{
claimErrors += errorTitle + createClaimDataWrapper.ErrorMessage + "\r\n";
}
claimCreatedCount += createClaimDataWrapper.ClaimCreatedCount;
SecurityLogs.MakeLogEntry(Permissions.ClaimEdit, patCur.PatNum, "New claim created for " + patCur.LName + "," + patCur.FName);
patNumOld = patCur.PatNum;
}
FillGrid();
if (claimCreatedCount > 0)
{
OnPostClaimCreation?.Invoke();
}
if (!string.IsNullOrEmpty(claimErrors))
{
MsgBoxCopyPaste form = new MsgBoxCopyPaste(claimErrors);
form.ShowDialog();
}
MessageBox.Show(Lan.g(this, "Number of claims created") + ": " + claimCreatedCount);
}
