//One Cycle.
//여기부터.
bool CycleInsp(ref TCycle _tCycle)
{
//Check Cycle Time Out.
string sTemp;
if (_tCycle.tmCycle.OnDelay(_tCycle.iStep == _tCycle.iPreStep && !OM.MstOptn.bDebugMode, 8000))
{
SM.ER_SetNeedShowErr(false);
sTemp = string.Format("VisionTimeOut Step={0:00}", _tCycle.iStep);
SM.ER_SetErr(ei.VSN_ComErr, sTemp);
_tCycle.iStep = 0;
return(true);
}
if (_tCycle.iStep != _tCycle.iPreStep)
{
sTemp = string.Format("Step={0:00}", _tCycle.iStep);
Log.Trace("Vision Communction", sTemp);
}
_tCycle.iPreStep = _tCycle.iStep;
//Cycle.
switch (_tCycle.iStep)
{
default:
sTemp = string.Format("DEFAILT END STATUS Step={0:00} , PreStep={0:00}", _tCycle.iStep, _tCycle.iPreStep);
SM.ER_SetErr(ei.VSN_ComErr, sTemp);
Log.Trace("Vision Communction", sTemp);
_tCycle.iStep = 0;
return(true);
case 10:
if (SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
//SML.MT.OneShotTrg((int)mi.TOOL_YTool,true,1000);
//SM.IO_SetY(Para.yVisn_ManInsp, true);
SM.IO_SetY(yi.VISN_ManInsp, true);
Log.Trace("Vision Shot", "ON");
_tCycle.tmDelay.Clear();
_tCycle.iStep++;
return(false);
case 11:
//if(_tCycle.tmDelay.OnDelay(true, 10))return false;
if (!SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
//SM.IO_SetY(Para.yVisn_ManInsp, false);
SM.IO_SetY(yi.VISN_ManInsp, false);
Log.Trace("Vision Shot", "OFF");
_tCycle.tmDelay.Clear();
_tCycle.iStep++;
return(false);
case 12:
//if(_tCycle.tmDelay.OnDelay(1000))return false;
//SM.IO_SetY(Para.yVisn_ManInsp, false);
_tCycle.tmDelay.Clear();
_tCycle.iStep++;
return(false);
case 13:
//if(_tCycle.tmDelay.OnDelay(1000))return false;
//if(SM.IO_GetY(Para.yVisn_ManInsp))
//{
//SM.IO_SetY(yi.VISN_ManInsp, false);
Log.Trace("Vision Shot", "OFF2");
//return false;
//}
if (SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
Log.Trace("Vision Shot", "END");
_tCycle.iStep = 0;
return(true);
}
}
bool CycleLotStart(ref TCycle _tCycle)
{
//Check Cycle Time Out.
string sTemp;
if (_tCycle.tmCycle.OnDelay(_tCycle.iStep == _tCycle.iPreStep && !OM.MstOptn.bDebugMode, 8000))
{
SM.ER_SetNeedShowErr(false);
sTemp = string.Format("VisionTimeOut Step={0:00}", _tCycle.iStep);
SM.ER_SetErr(ei.VSN_ComErr, sTemp);
SM.IO_SetY(yi.VISN_Change, false);
_tCycle.iStep = 0;
return(true);
}
if (_tCycle.iStep != _tCycle.iPreStep)
{
sTemp = string.Format("Step={0:00}", _tCycle.iStep);
Log.Trace("Vision Communction", sTemp);
}
_tCycle.iPreStep = _tCycle.iStep;
//Cycle.
switch (_tCycle.iStep)
{
default:
sTemp = string.Format("DEFAILT END STATUS Step={0:00} , PreStep={0:00}", _tCycle.iStep, _tCycle.iPreStep);
SM.ER_SetErr(ei.VSN_ComErr, sTemp);
Log.Trace("Vision Communction", sTemp);
SM.IO_SetY(yi.VISN_Change, false);
_tCycle.iStep = 0;
return(true);
case 10:
SM.IO_SetY(yi.VISN_LotStart, false);
_tCycle.iStep++;
return(false);
case 11:
if (SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
SM.IO_SetY(yi.VISN_LotStart, true);
_tCycle.iStep++;
return(false);
case 12:
if (!SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
SM.IO_SetY(yi.VISN_LotStart, false);
_tCycle.iStep++;
return(false);
case 13:
if (SM.IO_GetX(xi.VISN_Busy))
{
return(false);
}
_tCycle.iStep = 0;
return(true);
}
}
private static void UpdateButton()
{
//Check Inspect.
//if (!OM.CmnOptn.bIgnrDoor)
InspectDoor();
if (m_iStep != EN_SEQ_STEP.Idle)
{
InspectHomeDone();
}
if (m_iStep == EN_SEQ_STEP.Idle)
{
InspectLightGrid();
}
//Local Var.
bool isErr = SM.ER_IsErr();
bool isHomeEnd = SM.MT_GetHomeDoneAll();
//vision manual button.
//CDelayTimer tmVisnCycle ;
//if(IO_GetX(xETC_LStopSw)&& m_iSeqStat == ssStop ){
//if(tmVisnCycle.OnDelay(true , 1000)) {
// tmVisnCycle.Clear();
// if(MM.GetManNo() == mcNoneCycle) {
// MM.SetManCycle(mcVSN_CycleWork);
// }
//}
//}
//else {
//tmVisnCycle.Clear();
//}
bool bStartSw = SM.IO_GetXUp(xi.ETC_StartSw) || m_bBtnStart; // || SM.IO_GetXUp(xi.ETC_StartSwR) || m_bBtnStart ;
bool bStopSw = SM.IO_GetXUp(xi.ETC_StopSw) || m_bBtnStop; // || SM.IO_GetXUp(xi.ETC_StopSwR ) || m_bBtnStop ;
bool bResetSw = SM.IO_GetXUp(xi.ETC_ResetSw) || m_bBtnReset; // || SM.IO_GetXUp(xi.ETC_ResetSwR) || m_bBtnReset ;
bool bAirSw = m_bBtnAir;
bool bInitSw = SM.IO_GetXUp(xi.ETC_InitSw);
if (m_bBtnStart)
{
Log.Trace("m_bBtnStart", "true");
}
if (bStartSw)
{
Log.Trace("bStartSw", "Started");
if (m_iSeqStat == EN_SEQ_STAT.Init)
{
Log.Trace("SeqStat", "ssInit ");
}
if (m_iSeqStat == EN_SEQ_STAT.WorkEnd)
{
Log.Trace("SeqStat", "ssWorkEnd");
}
if (m_iSeqStat == EN_SEQ_STAT.Error)
{
Log.Trace("SeqStat", "ssError ");
}
if (m_iSeqStat == EN_SEQ_STAT.Running)
{
Log.Trace("SeqStat", "ssRunning");
}
if (m_iSeqStat == EN_SEQ_STAT.Stop)
{
Log.Trace("SeqStat", "ssStop ");
}
if (m_iSeqStat == EN_SEQ_STAT.RunWarn)
{
Log.Trace("SeqStat", "ssRunWarn");
}
if (MM.GetManNo() != (int)mc.NoneCycle)
{
Log.Trace("ManCycle", string.Format(MM.GetManNo().ToString()));
bStartSw = false;
}
}
//Update Switch's Lamp
bool bStopBtnFlick = (m_iStep == EN_SEQ_STEP.ToStopCon || m_iStep == EN_SEQ_STEP.ToStop) && m_bFlick;
//버튼 클릭시나
SM.IO_SetY(yi.ETC_StartLp, SM.IO_GetX(xi.ETC_StartSw) || m_bRun);
SM.IO_SetY(yi.ETC_StopLp, SM.IO_GetX(xi.ETC_StopSw) || !m_bRun || bStopBtnFlick);
SM.IO_SetY(yi.ETC_ResetLp, SM.IO_GetX(xi.ETC_ResetSw) || (m_bFlick && isErr));
//SM.IO_SetY(yi.ETC_AirLp , SM.IO_GetX(xi.ETC_AirSw ) || SM.IO_GetY(yi.ETC_MainAirSol ));
SM.IO_SetY(yi.ETC_InitLp, SM.IO_GetX(xi.ETC_InitSw));
// SM.IO_SetY(yi.ETC_StartLpR , SM.IO_GetX(xi.ETC_StartSwR ) || m_bRun );
// SM.IO_SetY(yi.ETC_StopLpR , SM.IO_GetX(xi.ETC_StopSwR ) || !m_bRun || bStopBtnFlick );
// SM.IO_SetY(yi.ETC_ResetLpR , SM.IO_GetX(xi.ETC_ResetSwR ) || (m_bFlick && isErr) );
////SM.IO_SetY(yi.ETC_AirLp , SM.IO_GetX(xi.ETC_AirSw ) || SM.IO_GetY(yi.ETC_MainAirSol ));
// SM.IO_SetY(yi.ETC_InitLpR , SM.IO_GetX(xi.ETC_InitSwR ) );
//Center Man Button
m_bBtnStart = false;
m_bBtnStop = false;
m_bBtnReset = false;
m_bBtnAir = false;
//Init. Button Flags.
if (bStartSw)
{
if (!SM.IO_GetX(xi.VISN_Ready))
{
Log.ShowMessage("Vision", SM.IO_GetXName(xi.VISN_Ready) + "Vision Ready IO is not On");
bStartSw = false;
}
if (COracle.bMakingDMC1List)
{
Log.ShowMessage("OracleDB", "Please Wait for Finish Making DMC1 List!");
bStartSw = false;
}
if (COracle.bMakingPanelList)
{
Log.ShowMessage("OracleDB", "Please Wait for Finish Making Panel List!");
bStartSw = false;
}
//if(!RockKey.Check()) { Log.ShowMessage("Error" , "Rock Key Error" ); bStartSw = false ; }
if (!isHomeEnd)
{
Log.ShowMessage("Error", "Please Initial First"); bStartSw = false;
}
//
if (!LOT.GetLotOpen())
{
Log.ShowMessage("Error", "Open Lot!"); bStartSw = false;
}
if (!InspectStripDispr())
{
m_bInspDispr = true; bStartSw = false;
}
if (!InspectStripUnknown())
{
m_bInspUnkwn = true; bStartSw = false;
}
if (m_iSeqStat == EN_SEQ_STAT.WorkEnd || m_iSeqStat == EN_SEQ_STAT.RunWarn)
{
Reset();
}
}
if (bInitSw)
{
MM.SetManCycle(mc.AllHome);
}
//Air Switch.
if (bAirSw && !m_bRun && m_iSeqStat != EN_SEQ_STAT.Init)
{
//SM.IO_SetY((int)yi.ETC_MainAirSol , !SM.IO_GetY((int)yi.ETC_MainAirSol )) ;
}
//Buzzer Off.
if (isErr && bStopSw)
{
SML.TL.SetBuzzOff(true);
}
//Set Condition Flags.
if (bStartSw) //스타트버튼 안눌리는것 때문에 테스트.
{
Log.Trace("isErr", isErr ? "true":"false");
Log.Trace("ManualMan.GetManNo()", string.Format(MM.GetManNo().ToString()));
}
if (bStopSw)
{
Log.Trace("Stop", "Stop");
}
bool isStopCon = bStopSw || (isErr && !m_bReqStop && m_bRun);
bool isRunCon = bStartSw && !isErr /*&& ManualMan.GetManNo() == mcNone*/;
bool isResetCon = bResetSw && !m_bRun;
//Run.
if (isRunCon && (m_iStep == EN_SEQ_STEP.Idle))
{
m_iStep = EN_SEQ_STEP.ToStartCon;
SML.TL.SetBuzzOff(false);
SM.ER_SetNeedShowErr(true);
}
//if( isRunCon && (m_iStep == EN_SEQ_STEP.Idle)) //스타트버튼 안눌리는것 때문에 테스트.
//{
// Log.Trace("isRunCon && m_iStep" , string.Format(m_iStep.ToString()));
//}
if (isStopCon && (m_iStep != EN_SEQ_STEP.Idle)) //스타트버튼 안눌리는것 때문에 테스트.
{
//Log.Trace("isStopCon && m_iStep" , string.Format(m_iStep.ToString()));
//Log.Trace("bStopSw" , bStopSw ? "True" : "False");
//Log.Trace("isErr" , isErr ? "True" : "False");
//Log.Trace("m_bReqStop" , m_bReqStop ? "True" : "False");
//Log.Trace("m_bRun" , m_bRun ? "True" : "False");
m_bReqStop = true;
}
if (isResetCon && (m_iStep == EN_SEQ_STEP.Idle))
{
Reset();
}
if (m_tmToStrt.OnDelay(m_iStep == EN_SEQ_STEP.ToStartCon || m_iStep == EN_SEQ_STEP.ToStart, 30000))
{
//Trace Log.
string Msg;
Msg = string.Format("ToStrtTimeOut : m_iStep=%d", m_iStep);
Log.Trace("SEQ", Msg);
SM.ER_SetErr(ei.ETC_ToStartTO);
m_iStep = EN_SEQ_STEP.Idle;
m_bRun = false;
}
//CDelayTimer StopBtn = null;
//StopBtn = new CDelayTimer();
//if(m_iStep == EN_SEQ_STEP.scToStopCon)
//{
// if(StopBtn.OnDelay(SM.IO_GetX((int)IP.xETC_StopSw)||SM.IO_GetX((int)IP.xETC_StopSw) , 5000))
// {
// Log.Trace("SEQ","Forced Stop");
// m_bRun = false ;
// m_iStep = EN_SEQ_STEP.scIdle;
// m_bReqStop = false;
// }
//}
//else
//{
// StopBtn.Clear();
//}
if (m_tmToStop.OnDelay(m_iStep == EN_SEQ_STEP.ToStopCon || m_iStep == EN_SEQ_STEP.ToStop, 30000)) // 20000)) {
{
//Trace Log.
string Msg;
Msg = string.Format("ToStopTimeOut : m_iStep=%d", m_iStep);
Log.Trace("SEQ", Msg);
m_bRun = false;
SM.ER_SetErr(ei.ETC_ToStopTO);
m_iStep = EN_SEQ_STEP.Idle;
m_bReqStop = false;
}
EN_SEQ_STEP iPreStep = m_iStep;
if (iPreStep != m_iStep)
{
string sMsg = "";
sMsg = "Step Changed" + string.Format(iPreStep.ToString()) + " -> " + string.Format(m_iStep.ToString());
Log.Trace("SEQ", sMsg);
}
iPreStep = m_iStep;
//이상하게 중간에 랏엔드가 되는 현상 발견해서 넣어둠.
bool bPreLotEnd = LOT.GetLotEnd();
if (LOT.GetLotEnd() != bPreLotEnd)
{
Log.Trace("SEQ", LOT.GetLotEnd() ? "LotEnd True" : "LotEnd False");
}
bPreLotEnd = LOT.GetLotEnd();
//Running Step.
switch (m_iStep)
{
case EN_SEQ_STEP.Idle: return;
case EN_SEQ_STEP.ToStartCon: if (!ToStartCon())
{
return;
}
m_iStep = EN_SEQ_STEP.ToStart;
Log.Trace("SEQ", "scToStartCon END");
return;
case EN_SEQ_STEP.ToStart: if (!ToStart())
{
return;
}
m_bRun = true;
m_bRunEdge = true;
m_iStep = EN_SEQ_STEP.Run;
Log.Trace("SEQ", "scToStart END");
return;
case EN_SEQ_STEP.Run: if (!m_bReqStop)
{
if (Autorun())
{
//랏엔드 상황.
if (OM.CmnOptn.bGoldenTray)
{
LOT.LotEnd();
int iIdx = 0;
if (DM.ARAY[ri.IDXR].CheckAllStat(cs.None))
{
iIdx = ri.IDXF;
}
else
{
iIdx = ri.IDXR;
}
int iCntGood = DM.ARAY[iIdx].GetCntStat(cs.Good);
int iCntNG = DM.ARAY[iIdx].GetCntStat(cs.NG1) +
DM.ARAY[iIdx].GetCntStat(cs.NG2) +
DM.ARAY[iIdx].GetCntStat(cs.NG3) +
DM.ARAY[iIdx].GetCntStat(cs.NG4) +
DM.ARAY[iIdx].GetCntStat(cs.NG5) +
DM.ARAY[iIdx].GetCntStat(cs.NG6) +
DM.ARAY[iIdx].GetCntStat(cs.NG7) +
DM.ARAY[iIdx].GetCntStat(cs.NG8) +
DM.ARAY[iIdx].GetCntStat(cs.NG9) +
DM.ARAY[iIdx].GetCntStat(cs.NG10);
int iCntEmpty = DM.ARAY[iIdx].GetCntStat(cs.NG0);
Log.ShowMessage("Golden Tray Ended", "Good=" + iCntGood + " NG=" + iCntNG + " Empty=" + iCntEmpty);
SEQ.IDXF.MoveCyl(ci.IDXF_ClampClOp, fb.Bwd);
SEQ.IDXR.MoveCyl(ci.IDXR_ClampClOp, fb.Bwd);
}
else
{
if (OM.EqpStat.iWorkBundle >= OM.DevInfo.iTRAY_BundleCnt)
{
LOT.LotEnd();
Log.ShowMessage("Checked", "Lot Ended.");
Log.Trace("SEQ", LOT.GetLotNo() + "LotEnd");
}
else
{
m_bRunEnd = true;
Log.ShowMessage("Checked", OM.EqpStat.iWorkBundle.ToString() + " Bundle Ended.");
Log.Trace("SEQ", LOT.GetLotNo() + OM.EqpStat.iWorkBundle.ToString() + "BundleEnd");
OM.EqpStat.bWrapingEnd = false; //요걸 초기화 해야 로딩을 한다.
}
}
//m_bRunEnd = true;
m_iStep = EN_SEQ_STEP.ToStopCon;
}
return;
}
m_bReqStop = false;
m_iStep = EN_SEQ_STEP.ToStopCon;
Log.Trace("SEQ", "scRun END");
return;
case EN_SEQ_STEP.ToStopCon: if (!ToStopCon())
{
if (Autorun())
{
if (OM.CmnOptn.bGoldenTray)
{
LOT.LotEnd();
int iIdx = 0;
if (DM.ARAY[ri.IDXR].CheckAllStat(cs.None))
{
iIdx = ri.IDXF;
}
else
{
iIdx = ri.IDXR;
}
int iCntGood = DM.ARAY[iIdx].GetCntStat(cs.Good);
int iCntNG = DM.ARAY[iIdx].GetCntStat(cs.NG1) +
DM.ARAY[iIdx].GetCntStat(cs.NG2) +
DM.ARAY[iIdx].GetCntStat(cs.NG3) +
DM.ARAY[iIdx].GetCntStat(cs.NG4) +
DM.ARAY[iIdx].GetCntStat(cs.NG5) +
DM.ARAY[iIdx].GetCntStat(cs.NG6) +
DM.ARAY[iIdx].GetCntStat(cs.NG7) +
DM.ARAY[iIdx].GetCntStat(cs.NG8) +
DM.ARAY[iIdx].GetCntStat(cs.NG9) +
DM.ARAY[iIdx].GetCntStat(cs.NG10);
int iCntEmpty = DM.ARAY[iIdx].GetCntStat(cs.NG0);
Log.ShowMessage("Golden Tray Ended", "Good=" + iCntGood + " NG=" + iCntNG + " Empty=" + iCntEmpty);
SEQ.IDXF.MoveCyl(ci.IDXF_ClampClOp, fb.Bwd);
SEQ.IDXR.MoveCyl(ci.IDXR_ClampClOp, fb.Bwd);
}
else
{
if (OM.EqpStat.iWorkBundle >= OM.DevInfo.iTRAY_BundleCnt)
{
LOT.LotEnd();
Log.ShowMessage("Checked", "Lot Ended.");
Log.Trace("SEQ", LOT.GetLotNo() + "LotEnd");
}
else
{
m_bRunEnd = true;
Log.ShowMessage("Checked", OM.EqpStat.iWorkBundle.ToString() + " Bundle Ended.");
Log.Trace("SEQ", LOT.GetLotNo() + OM.EqpStat.iWorkBundle.ToString() + "BundleEnd");
OM.EqpStat.bWrapingEnd = false; //요걸 초기화 해야 로딩을 한다.
}
}
}
return;
}
m_bRun = false;
m_iStep = EN_SEQ_STEP.ToStop;
Log.Trace("SEQ", "scToStopCon END");
return;
case EN_SEQ_STEP.ToStop: if (!ToStop())
{
return;
}
m_iStep = EN_SEQ_STEP.Idle;
m_bReqStop = false;
DM.SaveMap();
Log.Trace("SEQ", "scToStop END");
return;
}
}