public void AddFlowRespectsMinimumCapacityInPath()
{
Vertex c = new Vertex();
Edge f = Edge.AddEdge(b,c,1000d,1000d);
a.AddFlowTo(c);
Assert.AreEqual(f.ResidualCapacity(b),999d);
}
public void CanMakeNontrivialCut()
{
Vertex vert1 = new Vertex();
Vertex vert2 = new Vertex();
Vertex vert3 = new Vertex();
Vertex vert4 = new Vertex();
Vertex vert5 = new Vertex();
Vertex vert6 = new Vertex();
/* o:o-o6
* |\:
* o-o-o
* 1
* Where : is a weak edge
*/
Edge.AddEdge(vert1,vert2,1d,1d);
Edge.AddEdge(vert2,vert3,1d,1d);
Edge.AddEdge(vert2,vert4,1d,1d);
Edge.AddEdge(vert3,vert4,1d,1d);
Edge.AddEdge(vert3,vert5,0.1d,0.1d);
Edge.AddEdge(vert4,vert5,0.1d,0.1d);
Edge.AddEdge(vert5,vert6,1d,1d);
while(vert1.AddFlowTo(vert6));
vert1.ResidualCapacityConnectedNodes();
bool all_on_that_should_be = vert1.tagged_as_one && vert2.tagged_as_one && vert3.tagged_as_one && vert4.tagged_as_one;
bool all_off_that_should_be = !(vert5.tagged_as_one) && !(vert6.tagged_as_one);
Assert.IsTrue(all_off_that_should_be && all_on_that_should_be);
}
public static Edge AddEdge(Vertex v1, Vertex v2, double capacity_1_to_2, double capacity_2_to_1)
{
Edge toReturn = new Edge(v1,v2,capacity_1_to_2,capacity_2_to_1);
v1.AddEdge(toReturn);
v2.AddEdge(toReturn);
return toReturn;
}
public Edge(Vertex v1, Vertex v2, double capacity_1_to_2, double capacity_2_to_1)
{
this.v1 = v1;
this.v2 = v2;
this.capacity_1_to_2 = capacity_1_to_2;
this.capacity_2_to_1 = capacity_2_to_1;
this.flow_1_to_2 = 0.0;
}
public Vertex Traverse(Vertex origin_vertex)
{
if (origin_vertex == this.v1)
{
return this.v2;
}
else
{
return this.v1;
}
}
public double ResidualCapacity(Vertex origin_vertex)
{
if (origin_vertex == this.v1)
{
return this.capacity_1_to_2 - this.flow_1_to_2;
}
else
{
return this.capacity_2_to_1 + this.flow_1_to_2;
}
}
/// <summary>
/// Modifies the amount of flow currently carried by this edge.
/// </summary>
/// <param name='origin_vertex'>
/// </param>
/// <param name='flow'>
/// The flow parameter should always be positive here. This is the amount
/// of flow we are trying to send across the edge starting from origin_vertex.
/// </param>
public void AddFlow(Vertex origin_vertex, double flow)
{
if (flow > this.ResidualCapacity(origin_vertex))
{
throw new System.ArgumentException("Parameter exceeds allowable bounds.", "flow");
}
if (origin_vertex == this.v1)
{
this.flow_1_to_2 += flow;
}
else
{
this.flow_1_to_2 -= flow;
}
}
public double AddFlowTo(List<Vertex> traversed, Vertex target, double max_capacity)
{
if(max_capacity <= 0d) return 0d;
if(this == target)
return max_capacity;
traversed.Add(this);
foreach(Edge e in edges)
{
Vertex eTo = e.Traverse(this);
if(traversed.Contains(eTo)) continue;
double flow_added = eTo.AddFlowTo(traversed, target, Math.Min(e.ResidualCapacity(this),max_capacity));
if(flow_added > 0d) //If we've added any flow, the path is viable. Travel up the stack actually adding the flow.
{
e.AddFlow(this,flow_added);
return flow_added;
}
}
//If none of the edges returned any flow or were viable, then there is
//no path with positive capacity from this vertex to the target through
//as yet untraversed nodes.
return 0d;
}
public void TwoVertexGraph()
{
a = new Vertex();
b = new Vertex();
e = Edge.AddEdge(a,b,1d,1d);
}
public Classification MaximumAPosterioriInfer(ImageData test_input)
{
Vertex[,] site_nodes = new Vertex[test_input.XSites, test_input.YSites];
for(int i = 0; i < test_input.XSites; i++) for(int j = 0; j < test_input.YSites; j++)
{
site_nodes[i,j] = new Vertex();
}
Vertex source = new Vertex();
Vertex target = new Vertex();
for(int j = 0; j < test_input.YSites; j++)
{
for(int i = 0; i < test_input.XSites; i++)
{
Vertex t = site_nodes[i,j];
//Add the edge with capacity lambda_t from the source, or the edge with capacity -lambda_t to the target.
//Lambda_t is the log-likelihood ratio: log( p(y | x = 1) / p(y | x = 0) ).
//Using Bayes' law, we have
//Posterior Odds = P(x = 1 | y)/P(x = 0 | y) = Likelihood Ratio * Prior Odds = (P(y | x = 1) / P(y | x = 0))*(P(x=1)/P(x=0)) = e^(lambda_t)*1
//So lambda_t should be log(Posterior Odds) + log(Prior Odds) = log(P(x=1|y))-log(P(x=0|y)) + possibly 0?
//Now, P(x=1|y) is modeled as sigma(w^T * h(y)), so this should be
//log(sigma(w^T * h(y))) - log(1-sigma(w^T * h(y))).
//However, all these calculations were done at roughly 5:50 AM and I hadn't slept yet, so...
//I could totally be wrong.
//-Jesse Selover
double modeled_prob_of_one = MathWrapper.Sigma(W.DotProduct(Transformer.Transform(test_input[i,j])));
/*double prob_one = ((double)Ons_seen)/((double) Sites_seen);
double prob_zero = 1d - prob_one;
double lambda = MathWrapper.Log(modeled_prob_of_one) - MathWrapper.Log (1 - modeled_prob_of_one) + MathWrapper.Log (prob_one/prob_zero);*/
Edge.AddEdge(source,t,-MathWrapper.Log(modeled_prob_of_one),0);
Edge.AddEdge(t,target,-MathWrapper.Log(1-modeled_prob_of_one),0);
Console.WriteLine("Edge to target with strength {0}",-MathWrapper.Log(1-modeled_prob_of_one));
//Add an edge from the source with the modeled probability of 1, and an edge to the target with the modeled probability of 0.
//Console.WriteLine(ImageData.GetNewConnections(i,j).Count);
foreach(Tuple<int,int> other in test_input.GetNewConnections(i,j))
{
Vertex u = site_nodes[other.Item1,other.Item2];
//Add the edge with capacity Beta_{t,u} in both directions between t and u.
//DRFS (2006) says that the data dependent smoothing term is max(0,v^T * mu_{i,j}y)
DenseVector mu;
if(ImageData.IsEarlier(i,j,other.Item1,other.Item2))mu = Crosser.Cross(test_input[i,j],test_input[other.Item1,other.Item2]);
else mu = Crosser.Cross(test_input[other.Item1,other.Item2], test_input[i,j]);
double capacity = Math.Max(0,V.DotProduct(mu));
Console.WriteLine ("\tInternode edge with strength {0}",capacity);
Edge.AddEdge(t,u,capacity,capacity);
}
}
}
double flow_added = 0;
while(true)
{
flow_added = source.AddFlowTo(new List<Vertex>(), target, 400000000d);
if(flow_added <= 0.0000001d) break;
}; //Find the maximum flow
source.ResidualCapacityConnectedNodes(); //Find the source end of the minimum cut
Label[,] toReturn = new Label[test_input.XSites, test_input.YSites];
for(int i = 0; i < test_input.XSites; i++) for(int j = 0; j < test_input.YSites; j++)
{
if(site_nodes[i,j].tagged_as_one) toReturn[i,j] = Label.ON;
}
return new Classification(toReturn);
}
public bool AddFlowTo(Vertex target)
{
return AddFlowTo(new List<Vertex>(),target,30000000d)>0d;//Hack
}
