Example #1
0
        internal static void Display(Vector2 displayViewerPosition)
        {
            // Reset Tooltip active flag...
            ToolTipActive    = false;
            _canShowToolTips = WindowSettings.ShowToolTips && ShowToolTips;

            Position = WindowSettings.Position;
            int scrollX = 20;

            GUI.enabled = true;
            if (!SMSettings.LockSettings)
            {
                // "Realism Settings / Options"
                GUILayout.Label(SmUtils.SmTags["#smloc_settings_realism_001"], SMStyle.LabelTabHeader);
            }
            else
            {
                // "Realism Settings / Options  (Locked.  To unlock, edit SMSettings.dat file)"
                GUILayout.Label(
                    new GUIContent(SmUtils.SmTags["#smloc_settings_realism_002"],
                                   SmUtils.SmTags["#smloc_settings_realism_tt_001"]), SMStyle.LabelTabHeader);
            }
            GUILayout.Label("____________________________________________________________________________________________",
                            SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));

            bool isEnabled = !SMSettings.LockSettings;

            //RealismMode Buttons.
            DisplayRealismButtons();

            GUILayout.Label("____________________________________________________________________________________________",
                            SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));


            // RealXfers Mode
            GUI.enabled = isEnabled;
            //_label = "Realistic Transfers";
            //_toolTip = "Turns on/off Realistic Resource Transfers.";
            //_toolTip += "\r\nWhen ON, Resource fills, Dumps, Crew and Science transfers will behave realistically";
            //_toolTip += "\r\nWhen Off, Allows Fills, Dumps, Repeating Science,";
            //_toolTip += "\r\ninstantaneous Xfers, Crew Xfers anywwhere, etc.";
            _label               = SmUtils.SmTags["#smloc_settings_realism_008"];
            _toolTip             = SmUtils.SmTags["#smloc_settings_realism_tt_007"];
            _guiLabel            = new GUIContent(_label, _toolTip);
            SMSettings.RealXfers = GUILayout.Toggle(SMSettings.RealXfers, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            // RealControl Mode
            GUI.enabled = isEnabled;
            //_label = "Realistic Control";
            //_toolTip = "Turns on/off Realistic Shipboard Control.";
            //_toolTip += "\r\nWhen ON, you must have crew aboard, or a valid comm link to a control station or satellite";
            //_toolTip += "\r\nWhen Off, you have full control of the vessel at any time (subject to the availability of resources).";
            _label    = SmUtils.SmTags["#smloc_settings_realism_009"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_008"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.RealControl = GUILayout.Toggle(SMSettings.RealControl, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            // EnableCrew Modifications
            GUI.enabled = isEnabled;
            GUILayout.BeginHorizontal();
            //_label = "Enable Roster Modifications";
            //_toolTip = "Enables/Disable Crew Modifications in the Roster Window.";
            //_toolTip += "\r\nWhen ON, You cannot Edit, Create, or Respawn Crew members.";
            //_toolTip += "\r\nWhen Off, You can Edit, Create, or Respawn Crew members.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_010"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_009"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableCrewModify = GUILayout.Toggle(SMSettings.EnableCrewModify, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.EndHorizontal();

            //_label = "Enable Kerbal Renaming";
            //_toolTip = "Allows renaming a Kerbal.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_011"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_010"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableKerbalRename = GUILayout.Toggle(SMSettings.EnableKerbalRename, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.BeginHorizontal();
            //_label = "Enable Profession management";
            //_toolTip = "When On, SM allows you to change a Kerbal's profession.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_012"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_011"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableChangeProfession = GUILayout.Toggle(SMSettings.EnableChangeProfession, _guiLabel,
                                                                 GUILayout.Width(guiToggleWidth));
            GUILayout.EndHorizontal();
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUI.enabled = true;

            // Enable stock Crew Xfers
            GUI.enabled = SMSettings.EnableCrew && isEnabled;
            GUILayout.BeginHorizontal();
            //_label = "Enable Stock Crew Xfers";
            //_toolTip = "Turns On/Off the stock Crew Transfer mechanism.";
            //_toolTip += "\r\nWhen ON stock crew transfers will be Allowed.";
            //_toolTip += "\r\nWhen OFF Stock Crew transfers are disabled.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_013"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_012"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableStockCrewXfer = GUILayout.Toggle(SMSettings.EnableStockCrewXfer, _guiLabel,
                                                              GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.EndHorizontal();

            // EnableCrew Xfer Mode
            GUI.enabled = isEnabled;
            GUILayout.BeginHorizontal();
            //_label = "Enable SM Crew Xfers";
            //_toolTip = "Turns on/off Crew transfers using SM.";
            //_toolTip += "\r\nWhen ON, The Crew option will appear in your resource list.";
            //_toolTip += "\r\nWhen Off, Crew transfers are not possible using SM.";
            _label                = SmUtils.SmTags["#smloc_settings_realism_014"];
            _toolTip              = SmUtils.SmTags["#smloc_settings_realism_tt_013"];
            _guiLabel             = new GUIContent(_label, _toolTip);
            SMSettings.EnableCrew = GUILayout.Toggle(SMSettings.EnableCrew, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.EndHorizontal();

            if (!SMSettings.EnableCrew && HighLogic.LoadedSceneIsFlight)
            {
                if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()))
                {
                    // Clear Resource selection.
                    SMHighlighter.ClearResourceHighlighting(SMAddon.SmVessel.SelectedResourcesParts);
                    SMAddon.SmVessel.SelectedResources.Clear();
                    WindowTransfer.ShowWindow = false;
                }
            }

            // Set Gui.enabled for child settings to resources...
            GUI.enabled = SMSettings.EnableCrew && isEnabled;

            // EnablePFResources Mode
            GUILayout.BeginHorizontal();
            GUILayout.Space(20);
            //_label = "Enable Crew Fill and Empty Ops in Pre-Flight";
            //_toolTip = "Turns on/off Fill and Empty Crew when in preflight.";
            //_toolTip += "\r\nWhen ON, Fill & Empty Crew vessel wide are possible (shows in the Resource list).";
            //_toolTip += "\r\nWhen Off, Fill and Empty Crew vessel wide will not appear in the resource list.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_015"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_014"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnablePfCrews = GUILayout.Toggle(SMSettings.EnablePfCrews, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            // Enable stock Crew Xfer Override
            GUI.enabled = SMSettings.EnableCrew && isEnabled && SMSettings.EnableStockCrewXfer;
            GUILayout.BeginHorizontal();
            //_label = "Override Stock Crew Xfers";
            //_toolTip = "Turns on/off Overriding the stock Crew Transfer mechanism with the SM style.";
            //_toolTip += "\r\nWhen ON stock crew transfers will behave like SM style transfers.\n(requires both Stock Crew Transfers & SM Crew Transfers ON)";
            //_toolTip += "\r\nWhen Off Stock Crew transfers behave normally if enabled.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_016"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_015"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Space(20);
            SMSettings.OverrideStockCrewXfer = GUILayout.Toggle(SMSettings.OverrideStockCrewXfer, _guiLabel,
                                                                GUILayout.Width(300));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.EndHorizontal();

            // EnableCLS Mode
            GUILayout.BeginHorizontal();
            GUILayout.Space(20);
            if (!SMSettings.EnableCrew || !SMSettings.ClsInstalled)
            {
                GUI.enabled = false;
            }
            else
            {
                GUI.enabled = isEnabled;
            }
            //_label = "Enable CLS  (Connected Living Spaces)";
            //_toolTip = "Turns on/off Connected Living space support.";
            //_toolTip += "\r\nWhen ON, Crew can only be xfered to a part in the same 'Living Space'.";
            //_toolTip += "\r\nWhen Off, Crew transfers are possible to any part that can hold a kerbal.";
            _label               = SmUtils.SmTags["#smloc_settings_realism_017"];
            _toolTip             = SmUtils.SmTags["#smloc_settings_realism_tt_016"];
            _guiLabel            = new GUIContent(_label, _toolTip);
            SMSettings.EnableCls = GUILayout.Toggle(SMSettings.EnableCls, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            if (SMSettings.EnableCls != SMSettings.PrevEnableCls && HighLogic.LoadedSceneIsFlight)
            {
                if (!SMSettings.EnableCls)
                {
                    SMHighlighter.HighlightClsVessel(false, true);
                }
                else if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()))
                {
                    // Update spaces and reassign the resource to observe new settings.
                    SMAddon.UpdateClsSpaces();
                    SMAddon.SmVessel.SelectedResources.Clear();
                    SMAddon.SmVessel.SelectedResources.Add(SMConditions.ResourceType.Crew.ToString());
                }
            }

            // Enable stock Crew Xfer Override
            if (!SMSettings.EnableCrew || !SMSettings.ClsInstalled)
            {
                GUI.enabled = false;
            }
            else
            {
                GUI.enabled = isEnabled;
            }
            GUILayout.BeginHorizontal();
            //_label = "Enable CLS' Allow Unrestricted Crew Xfers switch";
            //_toolTip = "Turns on/off Enabling the CLS Switch allowing unrestricted crew transfers.";
            //_toolTip += "\r\nWhen ON (requires Realism Mode On), SM Manages Stock and CLS aware Crew Transfers.";
            //_toolTip += "\r\nWhen Off (or Realism is off), the setting in CLS is not touched.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_018"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_017"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Space(20);
            SMSettings.EnableClsAllowTransfer = GUILayout.Toggle(SMSettings.EnableClsAllowTransfer, _guiLabel,
                                                                 GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            GUILayout.EndHorizontal();

            // EnableScience Mode
            GUILayout.BeginHorizontal();
            GUI.enabled = isEnabled;
            //_label = "Enable Science Xfers";
            //_toolTip = "Turns on/off Science Xfers.";
            //_toolTip += "\r\nWhen ON, Science transfers are possible and show up in the Resource list.";
            //_toolTip += "\r\nWhen Off, Science transfers will not appear in the resource list.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_019"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_018"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableScience = GUILayout.Toggle(SMSettings.EnableScience, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            if (!SMSettings.EnableScience && HighLogic.LoadedSceneIsFlight)
            {
                // Clear Resource selection.
                if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Science.ToString()))
                {
                    SMAddon.SmVessel.SelectedResources.Clear();
                }
            }

            // EnableResources Mode
            GUILayout.BeginHorizontal();
            GUI.enabled = isEnabled;
            //_label = "Enable Resource Xfers";
            //_toolTip = "Turns on/off Resource Xfers.";
            //_toolTip += "\r\nWhen ON, Resource transfers are possible and display in Manifest Window.";
            //_toolTip += "\r\nWhen Off, Resources will not appear in the resource list.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_020"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_019"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableResources = GUILayout.Toggle(SMSettings.EnableResources, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            if (!SMSettings.EnableResources && HighLogic.LoadedSceneIsFlight)
            {
                // Clear Resource selection.
                if (SMAddon.SmVessel.SelectedResources.Count > 0 &&
                    !SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()) &&
                    !SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Science.ToString()))
                {
                    SMAddon.SmVessel.SelectedResources.Clear();
                }
            }

            // Set Gui.enabled for child settings to resources...
            GUI.enabled = SMSettings.EnableResources && isEnabled;

            // EnablePFResources Mode
            GUILayout.BeginHorizontal();
            GUILayout.Space(20);
            //_label = "Enable Resources in Pre-Flight";
            //_toolTip = "Turns on/off Fill and Empty Resources when in preflight.";
            //_toolTip += "\r\nWhen ON, Fill & Dump resources vessel wide are possible (shows in the Resource list).";
            //_toolTip += "\r\nWhen Off, Fill and Dump Resources vessel wide will not appear in the resource list.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_021"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_020"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnablePfResources = GUILayout.Toggle(SMSettings.EnablePfResources, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            // EnableXferCost Mode
            GUILayout.BeginHorizontal();
            GUILayout.Space(20);
            //_label = "Resource Xfers Consume Power";
            //_toolTip = "Turns on/off ElectricCharge cost forResource Xfers.";
            //_toolTip += "\r\nWhen ON, Resource transfers will consume ElectricCharge.";
            //_toolTip += "\r\nWhen Off, Resources Xfers consume no ElectricCharge.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_022"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_021"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.EnableXferCost = GUILayout.Toggle(SMSettings.EnableXferCost, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            // Resource Xfer EC cost
            GUI.enabled = !SMSettings.LockSettings && SMSettings.EnableResources && SMSettings.EnableXferCost;
            GUILayout.BeginHorizontal();
            GUILayout.Space(35);
            //_label = "Xfer Power Cost:";
            //_toolTip = "Sets the Electrical cost of resource Xfers.";
            //_toolTip += "\r\nThe higher the number the more ElectricCharge used.";
            _label    = $"{SmUtils.SmTags["#smloc_settings_realism_023"]}:";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_022"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(125), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }

            // Lets parse the string to allow decimal points.
            StrFlowCost = SMSettings.FlowCost.ToString(CultureInfo.InvariantCulture);
            // add the decimal point if it was typed.
            StrFlowCost = SmUtils.GetStringDecimal(StrFlowCost);
            // add the zero if it was typed.
            StrFlowCost = SmUtils.GetStringZero(StrFlowCost);

            StrFlowCost = GUILayout.TextField(StrFlowCost, 20, GUILayout.Height(20), GUILayout.Width(80));
            //_label = "EC/Unit";
            //_toolTip = "Sets the Electrical cost of resource Xfers when Realism Mode is on.";
            //_toolTip += "\r\nThe higher the number the more ElectricCharge used.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_024"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_022"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            // update decimal bool
            SmUtils.SetStringDecimal(StrFlowCost);
            //update zero bool
            SmUtils.SetStringZero(StrFlowCost);

            if (float.TryParse(StrFlowCost, out float newCost))
            {
                SMSettings.FlowCost = newCost;
            }

            // create xfer Flow Rate slider;
            // Lets parse the string to allow decimal points.
            string strFlowRate    = SMSettings.FlowRate.ToString(CultureInfo.InvariantCulture);
            string strMinFlowRate = SMSettings.MinFlowRate.ToString(CultureInfo.InvariantCulture);
            string strMaxFlowRate = SMSettings.MaxFlowRate.ToString(CultureInfo.InvariantCulture);
            string strMaxFlowTime = SMSettings.MaxFlowTimeSec.ToString();


            // Resource Flow Rate
            GUI.enabled = !SMSettings.LockSettings && SMSettings.EnableResources && SMSettings.RealXfers;
            GUILayout.BeginHorizontal();
            GUILayout.Space(25);
            //_label = "Resource Flow Rate:";
            //_toolTip = "Sets the rate that resources Xfer when Realistic Transfers is on.";
            //_toolTip += "\r\nThe higher the number the faster resources move.";
            //_toolTip += "\r\nYou can also use the slider below to change this value.";
            _label    = $"{SmUtils.SmTags["#smloc_settings_realism_025"]}:";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_023"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(135), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            strFlowRate = GUILayout.TextField(strFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
            //_label = "Units/Sec";
            //_toolTip = "Sets the rate that resources Xfer when Realism Mode is on.";
            //_toolTip += "\r\nThe higher the number the faster resources move.";
            //_toolTip += "\r\nYou can also use the slider below to change this value.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_026"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_023"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            if (float.TryParse(strFlowRate, out float newRate))
            {
                SMSettings.FlowRate = (int)newRate;
            }

            // Resource Flow rate Slider
            GUILayout.BeginHorizontal();
            GUILayout.Space(30);
            GUILayout.Label(SMSettings.MinFlowRate.ToString(CultureInfo.InvariantCulture), GUILayout.Width(10),
                            GUILayout.Height(20));
            SMSettings.FlowRate = GUILayout.HorizontalSlider((float)SMSettings.FlowRate, (float)SMSettings.MinFlowRate,
                                                             (float)SMSettings.MaxFlowRate, GUILayout.Width(240), GUILayout.Height(20));
            _label = SMSettings.MaxFlowRate.ToString(CultureInfo.InvariantCulture);
            //_toolTip = "Slide control to change the Resource Flow Rate shown above.";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_024"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(40), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();

            // Min Flow Rate for Slider
            GUILayout.BeginHorizontal();
            GUILayout.Space(30);
            //_label = " - Min Flow Rate:";
            //_toolTip = "Sets the lower limit (left side) of the Flow rate Slider range.";
            _label    = $" - {SmUtils.SmTags["#smloc_settings_realism_027"]}:";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_025"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            strMinFlowRate = GUILayout.TextField(strMinFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
            //_label = "Units/Sec";
            //_toolTip = "Sets the lower limit (left side) of the Flow rate Slider range.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_026"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_025"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();
            if (float.TryParse(strMinFlowRate, out newRate))
            {
                SMSettings.MinFlowRate = (int)newRate;
            }

            // Max Flow Rate for Slider
            GUILayout.BeginHorizontal();
            GUILayout.Space(30);
            //_label = " - Max Flow Rate:";
            //_toolTip = "Sets the upper limit (right side) of the Flow rate Slider range.";
            _label    = $" - {SmUtils.SmTags["#smloc_settings_realism_028"]}:";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_026"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            strMaxFlowRate = GUILayout.TextField(strMaxFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
            //_label = "Units/Sec";
            //_toolTip = "Sets the upper limit (right side) of the Flow rate Slider range.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_026"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_026"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();
            if (float.TryParse(strMaxFlowRate, out newRate))
            {
                SMSettings.MaxFlowRate = (int)newRate;
            }

            // Max Flow Time
            GUILayout.BeginHorizontal();
            GUILayout.Space(30);
            //_label = " - Max Flow Time:";
            //_toolTip = "Sets the maximum duration (in sec) of a resource transfer.";
            //_toolTip += "\r\nWorks in conjunction with the Flow rate.  if time it would take";
            //_toolTip += "\r\n to move a resource exceeds this number, this number will be used";
            //_toolTip += "\r\n to calculate an adjusted flow rate.";
            //_toolTip += "\r\n(protects you from long Xfers)";
            _label    = $" - {SmUtils.SmTags["#smloc_settings_realism_029"]}:";
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_027"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            strMaxFlowTime = GUILayout.TextField(strMaxFlowTime, 20, GUILayout.Height(20), GUILayout.Width(80));
            //_label = "Sec";
            //_toolTip = "Sets the maximum duration (in sec) of a resource transfer.";
            //_toolTip += "\r\nWorks in conjunction with the Flow rate.  if time it would take";
            //_toolTip += "\r\n to move a resource exceeds this number, this number will be used";
            //_toolTip += "\r\n to calculate an adjusted flow rate.";
            //_toolTip += "\r\n(protects you from long Xfers)";
            _label    = SmUtils.SmTags["#smloc_settings_realism_030"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_027"];
            _guiLabel = new GUIContent(_label, _toolTip);
            GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUILayout.EndHorizontal();
            if (float.TryParse(strMaxFlowTime, out newRate))
            {
                SMSettings.MaxFlowTimeSec = (int)newRate;
            }

            // reset gui.enabled to default
            GUI.enabled = true;
            GUILayout.Label("____________________________________________________________________________________________",
                            SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));

            // LockSettings Mode
            GUI.enabled = isEnabled;
            //_label = "Lock Realism Settings  (If set ON, disable in config file)";
            //_toolTip = "Locks the settings in this section so they cannot be altered in game.";
            //_toolTip += "\r\nTo turn off Locking you MUST edit the SMSettings.dat file.";
            _label    = SmUtils.SmTags["#smloc_settings_realism_031"];
            _toolTip  = SmUtils.SmTags["#smloc_settings_realism_tt_028"];
            _guiLabel = new GUIContent(_label, _toolTip);
            SMSettings.LockSettings = GUILayout.Toggle(SMSettings.LockSettings, _guiLabel, GUILayout.Width(guiToggleWidth));
            _rect = GUILayoutUtility.GetLastRect();
            if (Event.current.type == EventType.Repaint && _canShowToolTips)
            {
                ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
            }
            GUI.enabled = true;
            GUILayout.Label("____________________________________________________________________________________________",
                            SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));
        }