//
private void _RunAll(string id, string sn)
{
myGlobal.myTesting.StartButtonContent = "STOP";
timer_scrollsystemlog.Start();
Stopwatch st = new Stopwatch();
st.Start();
bool r = false;
int comretry = myGlobal.mySetting.CommonRetry;
//release device under test
if (ProjectTestItem.DUT != null)
{
ProjectTestItem.DUT = null;
}
//init control
myGlobal.myTesting.initValidating();
myGlobal.myTesting.ID = id;
myGlobal.myTesting.SerialNumber = sn;
//1 - validate product id
if (myGlobal.myTesting.IsVerifyID)
{
myGlobal.myTesting.ValidateID = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateID = "Failed";
return;
}
}
//validate ID
r = ProjectTestItem.Validate_ID_Value_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateID = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//2 - validate firmware version
if (myGlobal.myTesting.IsVerifyFW)
{
myGlobal.myTesting.ValidateFirmware = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateFirmware = "Failed";
return;
}
}
//validate firmware version
r = ProjectTestItem.Validate_Firmware_Version_Value_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, myGlobal.mySetting.FirmwareVersion, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateFirmware = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//3 - validate model
if (myGlobal.myTesting.IsVerifyModel)
{
myGlobal.myTesting.ValidateModel = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateModel = "Failed";
return;
}
}
//validate model
r = ProjectTestItem.Validate_Model_Value_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, myGlobal.mySetting.Model, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateModel = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//4 - write serial number
if (myGlobal.myTesting.IsWriteSN)
{
myGlobal.myTesting.WriteSerialNumber = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.WriteSerialNumber = "Failed";
return;
}
}
//write serial number
r = ProjectTestItem.Write_SerialNumber_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, myGlobal.myTesting.SerialNumber, comretry, myGlobal.mySetting.DelayRetry);
if (!r)
{
myGlobal.myTesting.WriteSerialNumber = "Failed";
goto END;
}
//validate serial number
r = ProjectTestItem.Validate_SerialNumber_Value_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, myGlobal.myTesting.SerialNumber, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.WriteSerialNumber = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//5 - Validate temperature sensor
if (myGlobal.myTesting.IsCheckTemperature)
{
myGlobal.myTesting.ValidateTemperature = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTemperature = "Failed";
return;
}
}
//check temperature sensor
r = ProjectTestItem.Is_Sensor_Valid_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, SensorType.Temperature, myGlobal.mySetting.TemperatureValue, myGlobal.mySetting.TemperatureAccuracy, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateTemperature = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//6 - Validate humidity sensor
if (myGlobal.myTesting.IsCheckHumidity)
{
myGlobal.myTesting.ValidateHumidity = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTemperature = "Failed";
return;
}
}
//check humidity sensor
r = ProjectTestItem.Is_Sensor_Valid_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_GAS, SensorType.Humidity, myGlobal.mySetting.HumidityValue, myGlobal.mySetting.HumidityAccuracy, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateHumidity = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//7 - Validate LED
if (myGlobal.myTesting.IsCheckLED)
{
myGlobal.myTesting.ValidateLED = "Waiting...";
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTemperature = "Failed";
return;
}
}
//check led
Dispatcher.Invoke(new Action(() => {
this.Opacity = 0.5;
myGlobal.myTesting.LogSystem += string.Format("\r\n+++ KIỂM TRA LED +++\r\n");
SingleLED window = new SingleLED(myGlobal.myTesting.ID, DeviceType.SMH_GAS);
window.ShowDialog();
r = window.LedResult == "1";
myGlobal.myTesting.ValidateLED = window.LedResult == "1" ? "Passed" : "Failed";
myGlobal.myTesting.LogSystem += window.LedResult == "1" ? ".........Kết quả: Passed\r\n" : ".........Kết quả: Failed\r\n";
switch (window.LedResult)
{
case "": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: Người thao tác chưa click chọn phán định trạng thái LED.\r\n"; break; }
case "1": { break; }
case "2": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: LED xanh không sáng.\r\n"; break; }
case "3": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: LED đỏ không sáng.\r\n"; break; }
case "4": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: Cả 2 LED đều không sáng.\r\n"; break; }
}
this.Opacity = 1;
}));
if (!r)
{
goto END;
}
}
//8 - Validate speaker
if (myGlobal.myTesting.IsCheckSpeaker)
{
myGlobal.myTesting.ValidateSpeaker = "Waiting...";
Thread.Sleep(3000); //
//check connection between DUT (usb dongle) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Open_Device_USB_Dongle(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTemperature = "Failed";
return;
}
}
//check speaker
Dispatcher.Invoke(new Action(() => {
this.Opacity = 0.5;
myGlobal.myTesting.LogSystem += string.Format("\r\n+++ KIỂM TRA CÒI BÁO ĐỘNG +++\r\n");
SingleSpeaker window = new SingleSpeaker(myGlobal.myTesting.ID, DeviceType.SMH_GAS);
window.ShowDialog();
r = window.SpeakerResult == "1";
myGlobal.myTesting.ValidateSpeaker = window.SpeakerResult == "1" ? "Passed" : "Failed";
myGlobal.myTesting.LogSystem += window.SpeakerResult == "1" ? ".........Kết quả: Passed\r\n" : ".........Kết quả: Failed\r\n";
switch (window.SpeakerResult)
{
case "": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: người thao tác chưa click chọn phán định trạng thái còi báo động.\r\n"; break; }
case "1": { break; }
case "2": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: còi báo động không kêu.\r\n"; break; }
}
this.Opacity = 1;
}));
if (!r)
{
goto END;
}
}
END:
st.Stop();
timer_scrollsystemlog.Stop();
myGlobal.myTesting.LogSystem += "\r\n+++ KẾT THÚC KIỂM TRA SẢN PHẨM +++\r\n";
myGlobal.myTesting.LogSystem += string.Format(">>> Tổng thời gian kiểm tra: {0} ms\r\n", String.Format("{0:n0}", st.ElapsedMilliseconds));
myGlobal.myTesting.LogSystem += string.Format(">>> Phán định sản phẩm: {0}\r\n", r == true ? "Passed" : "Failed");
bool ___ = r == true?myGlobal.myTesting.initPassed() : myGlobal.myTesting.initFailed();
myGlobal.myTesting.StartButtonContent = "START";
//close device under test
if (ProjectTestItem.DUT != null && ProjectTestItem.DUT.IsConnected == true)
{
ProjectTestItem.DUT.Close();
}
//save log
string logdir = string.Format("{0}log", AppDomain.CurrentDomain.BaseDirectory);
if (!Directory.Exists(logdir))
{
Directory.CreateDirectory(logdir); Thread.Sleep(100);
}
string pddir = string.Format("{0}\\gasdetector", logdir);
if (!Directory.Exists(pddir))
{
Directory.CreateDirectory(pddir); Thread.Sleep(100);
}
string stdir = string.Format("{0}\\asm", pddir);
if (!Directory.Exists(stdir))
{
Directory.CreateDirectory(stdir); Thread.Sleep(100);
}
string lgsingle = string.Format("{0}\\logsingle", stdir);
if (!Directory.Exists(lgsingle))
{
Directory.CreateDirectory(lgsingle); Thread.Sleep(100);
}
string lgtotal = string.Format("{0}\\logtotal", stdir);
if (!Directory.Exists(lgtotal))
{
Directory.CreateDirectory(lgtotal); Thread.Sleep(100);
}
//log single
string dedir = string.Format("{0}\\{1}", lgsingle, DateTime.Now.ToString("yyyyMMdd"));
if (!Directory.Exists(dedir))
{
Directory.CreateDirectory(dedir); Thread.Sleep(100);
}
string file = string.Format("{0}\\{1}_{2}_{3}_{4}.txt", dedir, DateTime.Now.ToString("yyyyMMdd"), DateTime.Now.ToString("HHmmss"), string.IsNullOrEmpty(myGlobal.myTesting.ID) ? "NULL" : myGlobal.myTesting.ID, myGlobal.myTesting.TotalResult);
StreamWriter sw = new StreamWriter(file, true, Encoding.Unicode);
sw.WriteLine(myGlobal.myTesting.LogSystem);
sw.Close();
//log total
string _title = "DateTimeCreate,ID,SN,ConfID,ConfFW,ConfModel,WriteSN,Temperature,Humidity,LED,Speaker,Total";
string _content = string.Format("{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11}",
DateTime.Now.ToString("yyyy/MM/dd HH:mm:ss"),
myGlobal.myTesting.ID,
myGlobal.myTesting.SerialNumber,
myGlobal.myTesting.ValidateID,
myGlobal.myTesting.ValidateFirmware,
myGlobal.myTesting.ValidateModel,
myGlobal.myTesting.WriteSerialNumber,
myGlobal.myTesting.ValidateTemperature,
myGlobal.myTesting.ValidateHumidity,
myGlobal.myTesting.ValidateLED,
myGlobal.myTesting.ValidateSpeaker,
myGlobal.myTesting.TotalResult);
string ft = string.Format("{0}\\{1}.csv", lgtotal, DateTime.Now.ToString("yyyyMMdd"));
if (!File.Exists(ft))
{
sw = new StreamWriter(ft, true, Encoding.Unicode);
sw.WriteLine(_title);
}
else
{
sw = new StreamWriter(ft, true, Encoding.Unicode);
}
sw.WriteLine(_content);
sw.Close();
}
//
private void _RunAll()
{
myGlobal.myTesting.StartButtonContent = "STOP";
timer_scrollsystemlog.Start();
Stopwatch st = new Stopwatch();
st.Start();
bool r = false;
int idretry = myGlobal.mySetting.GetIDRetry;
int comretry = myGlobal.mySetting.CommonRetry;
//release device under test
if (ProjectTestItem.DUT != null)
{
ProjectTestItem.DUT = null;
}
//init control
myGlobal.myTesting.initValidating();
//1 - Validate connection vs usb dongle
if (myGlobal.myTesting.IsCheckConnection)
{
myGlobal.myTesting.ValidateConnection = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateConnection = "Failed";
goto END;
}
}
//check connection between DUT (module zigbee) vs usb dongle
string id = "";
r = ProjectTestItem.Is_Module_ZigBee_Join_To_Network_D <TestingInformation>(myGlobal.myTesting, comretry, idretry, myGlobal.mySetting.DelayRetry, out id);
myGlobal.myTesting.ValidateConnection = r == true ? "Passed" : "Failed";
myGlobal.myTesting.ID = id;
if (!r)
{
goto END;
}
}
//2 - Validate data transmission vs usb dongle
if (myGlobal.myTesting.IsCheckTransmission)
{
myGlobal.myTesting.ValidateTransmission = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTransmission = "Failed";
goto END;
}
}
//check data transmission between DUT (module zigbee) vs usb dongle
string cmd = string.Format("CHECK,{0},SMH_ZIGBEE,RF!", myGlobal.myTesting.ID);
r = ProjectTestItem.Is_DUT_Transmitted_To_Node_RF_D <TestingInformation>(myGlobal.myTesting, comretry, myGlobal.mySetting.DelayRetry, cmd);
myGlobal.myTesting.ValidateTransmission = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//3 - Validate temperature sensor
if (myGlobal.myTesting.IsCheckTemperature)
{
myGlobal.myTesting.ValidateTemperature = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateTemperature = "Failed";
goto END;
}
}
//check temperature sensor
r = ProjectTestItem.Is_Sensor_Valid_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_SMOKE, SensorType.Temperature, myGlobal.mySetting.TemperatureValue, myGlobal.mySetting.TemperatureAccuracy, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateTemperature = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//4 - Validate humidity sensor
if (myGlobal.myTesting.IsCheckHumidity)
{
myGlobal.myTesting.ValidateHumidity = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateHumidity = "Failed";
goto END;
}
}
//check humidity sensor
r = ProjectTestItem.Is_Sensor_Valid_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_SMOKE, SensorType.Humidity, myGlobal.mySetting.HumidityValue, myGlobal.mySetting.HumidityAccuracy, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateHumidity = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//5 - Validate smoke sensor
if (myGlobal.myTesting.IsCheckSmokeSensor)
{
myGlobal.myTesting.ValidateSmokeSensor = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateSmokeSensor = "Failed";
goto END;
}
}
//check smoke sensor
r = ProjectTestItem.Is_Sensor_Valid_D <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_SMOKE, SensorType.Smoke, myGlobal.mySetting.SmokeValue, myGlobal.mySetting.SmokeAccuracy, comretry, myGlobal.mySetting.DelayRetry);
myGlobal.myTesting.ValidateSmokeSensor = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//6 - Validate LED
if (myGlobal.myTesting.IsCheckLED)
{
myGlobal.myTesting.ValidateLED = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateLED = "Failed";
goto END;
}
}
//check led
Dispatcher.Invoke(new Action(() => {
this.Opacity = 0.5;
myGlobal.myTesting.LogSystem += string.Format("\r\n+++ KIỂM TRA LED +++\r\n");
SingleLED window = new SingleLED(myGlobal.myTesting.ID, DeviceType.SMH_SMOKE);
window.ShowDialog();
r = window.LedResult == "1";
myGlobal.myTesting.ValidateLED = window.LedResult == "1" ? "Passed" : "Failed";
myGlobal.myTesting.LogSystem += window.LedResult == "1" ? ".........Kết quả: Passed\r\n" : ".........Kết quả: Failed\r\n";
switch (window.LedResult)
{
case "": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: Người thao tác chưa click chọn phán định trạng thái LED.\r\n"; break; }
case "1": { break; }
case "2": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: LED xanh không sáng.\r\n"; break; }
case "3": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: LED đỏ không sáng.\r\n"; break; }
case "4": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: Cả 2 LED đều không sáng.\r\n"; break; }
}
this.Opacity = 1;
}));
if (!r)
{
goto END;
}
}
//7 - Validate speaker
if (myGlobal.myTesting.IsCheckSpeaker)
{
myGlobal.myTesting.ValidateSpeaker = "Waiting...";
Thread.Sleep(3000); //
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.ValidateSpeaker = "Failed";
goto END;
}
}
//check speaker
Dispatcher.Invoke(new Action(() => {
this.Opacity = 0.5;
myGlobal.myTesting.LogSystem += string.Format("\r\n+++ KIỂM TRA CÒI BÁO ĐỘNG +++\r\n");
SingleSpeaker window = new SingleSpeaker(myGlobal.myTesting.ID, DeviceType.SMH_SMOKE);
window.ShowDialog();
r = window.SpeakerResult == "1";
myGlobal.myTesting.ValidateSpeaker = window.SpeakerResult == "1" ? "Passed" : "Failed";
myGlobal.myTesting.LogSystem += window.SpeakerResult == "1" ? ".........Kết quả: Passed\r\n" : ".........Kết quả: Failed\r\n";
switch (window.SpeakerResult)
{
case "": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: người thao tác chưa click chọn phán định trạng thái còi báo động.\r\n"; break; }
case "1": { break; }
case "2": { myGlobal.myTesting.LogSystem += ".........Thông tin lỗi: còi báo động không kêu.\r\n"; break; }
}
this.Opacity = 1;
}));
if (!r)
{
goto END;
}
}
//9 - Print the product id label
if (myGlobal.myTesting.IsPrintLabel)
{
myGlobal.myTesting.PrintLabel = "Waiting...";
//check id valid or not
r = !string.IsNullOrEmpty(myGlobal.myTesting.ID);
if (!r)
{
myGlobal.myTesting.PrintLabel = "Failed";
goto END;
}
//print label
string id_table_name = "tb_ProductID";
string log_table_name = "tb_DataLog";
string report_name = "ProductID";
TableProductID id_info = new TableProductID()
{
ProductID = myGlobal.myTesting.ID
};
TableDataLog ms_log_info = new TableDataLog()
{
DateTimeCreated = DateTime.Now.ToString("yyyy/MM/dd HH:mm:ss"),
ErrorMessage = "",
Factory = "",
JigNumber = "",
LineCode = "",
ProductCode = "",
ProductColor = "",
ProductID = id_info.ProductID,
ProductName = "SMOKE DETECTOR",
ProductNumber = "",
Station = "PCBA-FUNCTION",
Worker = "",
WorkOrder = ""
};
r = ProjectTestItem.Print_DUT_ID_Labels <TestingInformation, TableProductID, TableDataLog>
(
myGlobal.myTesting,
myGlobal.myTesting.ID,
string.Format("{0}access_db\\{1}", AppDomain.CurrentDomain.BaseDirectory, myGlobal.mySetting.MSAccessFile),
id_table_name,
id_info,
log_table_name,
ms_log_info,
report_name
);
myGlobal.myTesting.PrintLabel = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
//10. Switch firmware to user mode
if (myGlobal.myTesting.IsSwitchFirmwareMode)
{
myGlobal.myTesting.SwitchFirmwareMode = "Waiting...";
//check connection between DUT (module zigbee) vs PC
if (ProjectTestItem.DUT == null || ProjectTestItem.DUT.IsConnected == false)
{
r = ProjectTestItem.Is_DUT_Connected_To_Client_PC <TestingInformation, SettingInformation>(myGlobal.myTesting, myGlobal.mySetting, comretry);
if (!r)
{
myGlobal.myTesting.SwitchFirmwareMode = "Failed";
goto END;
}
}
//switch firmware to user mode
r = ProjectTestItem.Switch_Firmware_To_User_Mode <TestingInformation>(myGlobal.myTesting, myGlobal.myTesting.ID, DeviceType.SMH_SMOKE, "111", 3);
myGlobal.myTesting.SwitchFirmwareMode = r == true ? "Passed" : "Failed";
if (!r)
{
goto END;
}
}
END:
st.Stop();
timer_scrollsystemlog.Stop();
myGlobal.myTesting.LogSystem += "\r\n+++ KẾT THÚC KIỂM TRA SẢN PHẨM +++\r\n";
myGlobal.myTesting.LogSystem += string.Format(">>> Tổng thời gian kiểm tra: {0} ms\r\n", String.Format("{0:n0}", st.ElapsedMilliseconds));
myGlobal.myTesting.LogSystem += string.Format(">>> Phán định sản phẩm: {0}\r\n", r == true ? "Passed" : "Failed");
bool ___ = r == true?myGlobal.myTesting.initPassed() : myGlobal.myTesting.initFailed();
myGlobal.myTesting.StartButtonContent = "START";
//close device under test
if (ProjectTestItem.DUT != null && ProjectTestItem.DUT.IsConnected == true)
{
ProjectTestItem.DUT.Close();
}
//save log
string logdir = string.Format("{0}log", AppDomain.CurrentDomain.BaseDirectory);
if (!Directory.Exists(logdir))
{
Directory.CreateDirectory(logdir); Thread.Sleep(100);
}
string pddir = string.Format("{0}\\smokedetector", logdir);
if (!Directory.Exists(pddir))
{
Directory.CreateDirectory(pddir); Thread.Sleep(100);
}
string stdir = string.Format("{0}\\pcba", pddir);
if (!Directory.Exists(stdir))
{
Directory.CreateDirectory(stdir); Thread.Sleep(100);
}
string lgsingle = string.Format("{0}\\logsingle", stdir);
if (!Directory.Exists(lgsingle))
{
Directory.CreateDirectory(lgsingle); Thread.Sleep(100);
}
string lgtotal = string.Format("{0}\\logtotal", stdir);
if (!Directory.Exists(lgtotal))
{
Directory.CreateDirectory(lgtotal); Thread.Sleep(100);
}
//log single
string dedir = string.Format("{0}\\{1}", lgsingle, DateTime.Now.ToString("yyyyMMdd"));
if (!Directory.Exists(dedir))
{
Directory.CreateDirectory(dedir); Thread.Sleep(100);
}
string file = string.Format("{0}\\{1}_{2}_{3}_{4}.txt", dedir, DateTime.Now.ToString("yyyyMMdd"), DateTime.Now.ToString("HHmmss"), string.IsNullOrEmpty(myGlobal.myTesting.ID) ? "NULL" : myGlobal.myTesting.ID, myGlobal.myTesting.TotalResult);
StreamWriter sw = new StreamWriter(file, true, Encoding.Unicode);
sw.WriteLine(myGlobal.myTesting.LogSystem);
sw.Close();
//log total
string _title = "DateTimeCreate,ID,ConRF,TransRF,Temperature,Humidity,Smoke,LED,Speaker,PrintLabel,SwitchFW,Total";
string _content = string.Format("{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11}",
DateTime.Now.ToString("yyyy/MM/dd HH:mm:ss"),
myGlobal.myTesting.ID,
myGlobal.myTesting.ValidateConnection,
myGlobal.myTesting.ValidateTransmission,
myGlobal.myTesting.ValidateTemperature,
myGlobal.myTesting.ValidateHumidity,
myGlobal.myTesting.ValidateSmokeSensor,
myGlobal.myTesting.ValidateLED,
myGlobal.myTesting.ValidateSpeaker,
myGlobal.myTesting.PrintLabel,
myGlobal.myTesting.SwitchFirmwareMode,
myGlobal.myTesting.TotalResult);
string ft = string.Format("{0}\\{1}.csv", lgtotal, DateTime.Now.ToString("yyyyMMdd"));
if (!File.Exists(ft))
{
sw = new StreamWriter(ft, true, Encoding.Unicode);
sw.WriteLine(_title);
}
else
{
sw = new StreamWriter(ft, true, Encoding.Unicode);
}
sw.WriteLine(_content);
sw.Close();
}
