/// <summary>
/// 在添加controller之前做检查
/// </summary>
/// <param name="typeInfo">controller类型</param>
/// <param name="addNumber">增加的数量</param>
/// <returns></returns>
private bool CheckBeforeAddController(CentralController typeInfo, int addNumber)
{
ControllerLayoutType type = glProject.ControllerLayoutType;
int controllerQty = GetControllerQty();
int outdoorQty = GetOutdoorQty();
int indoorQty = GetIndoorQty();
int ccControllerQty = GetControllerQty(ControllerType.CentralController);
int onoffQty = GetControllerQty(ControllerType.ONOFF);
int unitQty = outdoorQty + indoorQty;
//累加上需要新增的数量
controllerQty += addNumber;
switch (typeInfo.Type)
{
case ControllerType.ONOFF:
onoffQty += addNumber;
break;
case ControllerType.Software: //软件不统计数量，但是因为会同时增加一个实体controller，所以需要加上
case ControllerType.CentralController:
ccControllerQty += addNumber;
break;
}
int deviceQty = controllerQty + unitQty; //TODO: 此处还需要加上remote controller的数量
////检查产品类型是否匹配
//if (CheckProductType(ucDropOutdoor1.GetProductTypes(), typeInfo.ProductType) == false)
//{
// return false;
//}
//区分exchanger 和system 选中的Controller on 20170830 by xyj
if (CheckSystemAndExchanger(ucDropOutdoor1.GetOutdoorAndExchanger(), typeInfo.ProductType) == false)
{
return(false);
}
//区分exchanger类型对应的Controller 类型是否相同on 20170904 by xyj
if (CheckExchangerIsMatch(ucDropOutdoor1.GetExchangerTypesList(), typeInfo.ProductType) == false)
{
return(false);
}
//EU暂时忽略设备数及Hlink限制 add on 20180621 by Vince
if (_mainRegion == "EU_E" || _mainRegion == "EU_S" || _mainRegion == "EU_W")
{
return(true);
}
//检查设备数量是否符合拖动的controller的限制
if (CheckSystemQtyLimitation(typeInfo, indoorQty, outdoorQty, deviceQty + addNumber) == false)
{
return(false);
}
//检查设备数量是否在H-Link的限制范围之内
bool isHLinkII = !(typeInfo.Protocol.Trim().ToUpper() == "H-LINK" || HasHLinkI());
if (CheckHLinkLimiation(isHLinkII, indoorQty, outdoorQty, deviceQty + addNumber) == false)
{
return(false);
}
////1 - Can be connected upto 8 Central Controllers in 1 H-Link
//if (typeInfo.Type == ControllerType.CentralController && ccControllerQty > Model.ConstValue.HLINKII_MAX_CC_QTY)
//{
// JCMsg.ShowWarningOK(Msg.CONTROLLER_HLINK_CENTRAL_CONTROLLER_QTY(Model.ConstValue.HLINKII_MAX_CC_QTY));
// return false;
//}
//1 - Can be connected upto 8 Central Controllers in 1 H-Link
if (typeInfo.MaxControllerNumber > 0 && ccControllerQty > typeInfo.MaxControllerNumber)
{
JCMsg.ShowWarningOK(Msg.CONTROLLER_HLINK_CENTRAL_CONTROLLER_QTY(ControllerConstValue.HLINKII_MAX_CC_QTY));
return(false);
}
//2 - combination limitation
CheckCombinationLimitation(typeInfo);
//3 - check quantity of this model
if (typeInfo.MaxSameModel > 0 && GetControllerQty(typeInfo.Model) + addNumber > typeInfo.MaxSameModel)
{
JCMsg.ShowWarningOK(Msg.CONTROLLER_HLINK_CONTROLLER_QTY(typeInfo.MaxSameModel));
return(false);
}
//4 - check quantity of this type
if (typeInfo.MaxSameType > 0 && GetControllerQty(typeInfo.Type) + addNumber > typeInfo.MaxSameType)
{
JCMsg.ShowWarningOK(Msg.CONTROLLER_HLINK_CONTROLLER_QTY(typeInfo.MaxSameType));
return(false);
}
//5 - BACNet Interface Can be connected upto 4 Central Controllers
if (typeInfo.Type == ControllerType.BACNetInterface && ccControllerQty > ControllerConstValue.BACNET_MAX_CC_QTY)
{
JCMsg.ShowWarningOK(Msg.CONTROLLER_BACNET_CC_QTY(ControllerConstValue.BACNET_MAX_CC_QTY));
}
//6 - For Web based Cotnrol, max 176 units (ODU + IDU) can be connected.
if (typeInfo.MaxUnitNumber > 0 && unitQty > typeInfo.MaxUnitNumber)
{
//TODO: 此处需要翻译
JCMsg.ShowWarningOK(Msg.CONTROLLER_UNIT_QTY(typeInfo.Model, typeInfo.MaxUnitNumber));
}
return(true);
}
