public void Dispose()
{
if (!m_IsDisposed)
{
m_App.CloseDoc(m_Model.GetTitle());
m_IsDisposed = true;
}
}
private void CloseAllModel()
{
do
{
ModelDoc2 swModel = iSwApp.ActiveDoc as ModelDoc2;
if (swModel != null)
{
iSwApp.CloseDoc(swModel.GetPathName());
}
else
{
break;
}
} while (true);
}
public void Close()
{
try
{
if (!modelName.Contains("X11502139.SLDASM"))
{
iSwApp.CloseDoc(modelName);
}
WriteLog(string.Format("关闭模型{0}！", Path.GetFileName(modelName)), 1);
}
catch (Exception ex)
{
WriteLog(string.Format("关闭模型失败{0}！", ex.ToString()), 2);
}
}
public double Build(double width, double height, double length, out int totalModelsBuilt)
{
m_TotalModelsBuilt++;
var templatePath = m_App.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplatePart);
var part = m_App.NewDocument(templatePath, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0) as IPartDoc;
var box = m_App.IGetModeler().CreateBodyFromBox(
new double[]
{
0, 0, 0,
1, 0, 0,
width, length, height
});
var feat = part.CreateFeatureFromBody3(box, false, (int)swCreateFeatureBodyOpts_e.swCreateFeatureBodySimplify);
int errs = -1;
int warns = -1;
var outPath = Path.Combine(m_BuildDir, $"{DateTime.Now.ToString("yyyy-MM-dd-hh-mm-ss")}.sldprt");
var dir = Path.GetDirectoryName(outPath);
if (!Directory.Exists(dir))
{
Directory.CreateDirectory(dir);
}
(part as IModelDoc2).Extension.SaveAs(outPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion,
(int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errs, ref warns);
totalModelsBuilt = m_TotalModelsBuilt;
var mass = (part as IModelDoc2).Extension.CreateMassProperty().Mass;
m_App.CloseDoc((part as IModelDoc2).GetTitle());
return(mass);
}
private void UpdateCachedBodyIfNeeded(LinkFileMacroFeatureParameters parameters)
{
LastError = null;
IModelDoc2 refDoc = null;
bool isRefDocLoaded = false;
try
{
if (File.Exists(parameters.LinkedFilePath))
{
LastUpdateStamp = File.GetLastWriteTimeUtc(parameters.LinkedFilePath).Ticks;
refDoc = m_App.GetOpenDocumentByName(parameters.LinkedFilePath) as IModelDoc2;
isRefDocLoaded = refDoc != null;
if (LastUpdateStamp != parameters.FileLastUpdateTimeStamp ||
(isRefDocLoaded && refDoc.GetSaveFlag()) || CachedBodies == null)
{
if (!isRefDocLoaded)
{
m_App.DocumentVisible(false, (int)swDocumentTypes_e.swDocPART);
var docSpec = m_App.GetOpenDocSpec(parameters.LinkedFilePath) as IDocumentSpecification;
docSpec.Silent = true;
docSpec.ReadOnly = true;
refDoc = m_App.OpenDoc7(docSpec);
if (refDoc == null)
{
throw new InvalidOperationException($"Failed to load the referenced file ${docSpec.FileName} with error: {(swFileLoadError_e)docSpec.Error}");
}
}
if (refDoc is IPartDoc)
{
var bodies = (refDoc as IPartDoc).GetBodies2((int)swBodyType_e.swAllBodies, true) as object[];
if (bodies != null && bodies.Any())
{
var resBodies = bodies.Cast <IBody2>().Select(b => b.ICopy()).ToArray();
CachedBodies = resBodies;
}
else
{
throw new InvalidOperationException("No bodies in the referenced document");
}
}
else
{
throw new InvalidOperationException("Referenced document is not a part");
}
}
}
else
{
throw new FileNotFoundException($"Linked file '${parameters.LinkedFilePath}' is not found");
}
}
catch (Exception ex)
{
LastError = ex;
}
finally
{
m_App.DocumentVisible(true, (int)swDocumentTypes_e.swDocPART);
if (!isRefDocLoaded && refDoc != null)
{
m_App.CloseDoc(refDoc.GetTitle());
}
}
}
public void Close()
{
m_App.CloseDoc(Title);
}
public static Task Using(this IModelDoc2 doc, ISldWorks sldWorks, Func <IModelDoc2, Task> run)
{
return(doc.Using(m => sldWorks.CloseDoc(doc.GetTitle()), run));
}
public static void Using(this IModelDoc2 doc, ISldWorks sldWorks, Action <IModelDoc2> run)
{
doc.Using(m => sldWorks.CloseDoc(doc.GetTitle()), run);
}
public void close()
{
swApp.CloseDoc(fileName);
} //关闭模型文件
/// <summary>
/// 执行操作然后关闭文档
/// </summary>
/// <param name="doc"></param>
/// <param name="sldWorks"></param>
/// <param name="run"></param>
public static void Using(this IModelDoc2 doc, ISldWorks sldWorks, Action <IModelDoc2> run)
{
run.Invoke(doc);
sldWorks.CloseDoc(doc.GetTitle());
}
private void buttonAuto_Click(object sender, EventArgs e)
{
//新建一个零件 ,画一条150长度的直线,然后最大化.
ISldWorks iswApp = Utility.ConnectToSolidWorks();
string partDefaultPath = iswApp.GetDocumentTemplate(1, "", 0, 0, 0);
var part = iswApp.NewDocument(partDefaultPath, 0, 0, 0);
ModelDoc2 modelDoc = (ModelDoc2)iswApp.ActiveDoc;
modelDoc.Extension.SelectByID2("Plane1", "PLANE", 0, 0, 0, false, 0, null, 0);
modelDoc.SketchManager.InsertSketch(true);
modelDoc.SketchManager.CreateLine(0, 0.1, 0, 0, 0, 0);
modelDoc.SketchManager.InsertSketch(true);
modelDoc.ClearSelection2(true);
modelDoc.Extension.SelectByID2("Sketch1", "SKETCH", 0, 0, 0, false, 1, null, 0);
var b = modelDoc.InsertCompositeCurve();
modelDoc.ClearSelection2(true);
modelDoc.FeatureManager.ViewFeatures = false;
modelDoc.ViewZoomtofit2();
ModelView modelView = (ModelView)modelDoc.ActiveView;
iswApp.FrameState = 1; //最大化solidworks
modelDoc.ViewZoomtofit2();
modelView.Scale2 = 0.5;
//
modelDoc.ClearSelection2(true);
string ImagePath = @"D:\temp.JPG";
modelDoc.SaveAs3(ImagePath, 0, 0);
int LineInImage = img2color(ImagePath);
try
{
System.IO.File.Delete(ImagePath);
}
catch (Exception exception)
{
Console.WriteLine(exception);
}
if (LineInImage > 0)
{
double ActionScreenHeight = double.Parse(txtSCHeight.Text); //GetScreenRealWeight(double.Parse( textScreenSize.Text));
//当前视图的比例
double ActionScale = modelView.Scale2;
//solidworks中的直线占比
double defaultSolidworksP = LineInImage / 1200.0;//double.Parse(txtScreenY.Text);
//当前比例下 1像素 等于多少mm
double thisSc = 100 / LineInImage;
//实际屏幕 1 像素尺寸
double oneP = (ActionScreenHeight) / 1200.0;
//当比例设置为 1时 1像素能表示的长度:
double onePshowLength = thisSc / ActionScale;
//959 1370
GetWindowsSize getWindowSize = new GetWindowsSize();
GetWindowsSize.windsize solidworksize = getWindowSize.GetSize("SLDWORKS");
double getSC = 50.0 / (LineInImage * oneP);
txtSC.Text = getSC.ToString();// getSC.ToString();
modelView.Scale2 = getSC;
modelDoc.GraphicsRedraw2();
Debug.Print(getSC.ToString());
// modelView.Scale2 = double.Parse(txtSC.Text);
// sldWorks.scen
}
iswApp.CloseDoc(modelDoc.GetPathName());
}
public void GetTiff()
{
//object obt= iSwApp.GetAddInObject("ConisioSW2.ConisioSWAddIn") as SwAddin;
//iSwApp.CommandInProgress = true;
if (Directory.Exists("D:\\PDM\\"))
{
pdm_path = "D:\\PDM\\";
}
else if (Directory.Exists("C:\\PDM\\"))
{
pdm_path = "C:\\PDM\\";
}
else
{
MessageBox.Show("Не найден путь PDM"); return;
}
ModelDoc2 swModel;
ModelDocExtension swModelDocExt;
AssemblyDoc swAssy;
Component2 swComp;
DrawingDoc Part;
int errors = 0;
int warnings = 0;
string fileName; // GetOpenFileName
Dictionary <string, string> Dict, Drw;
string projekt_path, key, pathName;
string[] сonfNames;
object[] Comps;
swModel = (ModelDoc2)iSwApp.ActiveDoc;
if (swModel == null)
{
fileName = iSwApp.GetOpenFileName("File to SLDASM", "", "SLDASM Files (*.SLDASM)|*.SLDASM|", out _, out _, out _);
//Проверяем путь
if (fileName == "")
{
return;
}
swModel = (ModelDoc2)iSwApp.OpenDoc6(fileName, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
}
//Проверяем открыта сборка или нет
if ((swModel.GetType() != 2) | (swModel == null))
{
iSwApp.SendMsgToUser2("Откройте сборку", 4, 2);
return;
}
//FileAttributes attr = File.GetAttributes(@"c:\Temp");
//attr.HasFlag(FileAttributes.Directory); // файл или дирректория
//swModel = (ModelDoc2)swApp.ActiveDoc;
swAssy = (AssemblyDoc)swModel;
Dict = new Dictionary <string, string>();
projekt_path = swModel.GetPathName().Remove(swModel.GetPathName().LastIndexOf((char)92) + 1);
int value = iSwApp.SendMsgToUser2("Создать Tiff со всей сборки(Да) или только с её папки(Нет)?", 3, 5);
iSwApp.UnloadAddIn(sAddinName);
//iSwApp.SendMsgToUser2("Значение "+ value, 4, 2);
switch (value)
{
case 3:
{
List <string> allDRW = new List <string>(Directory.GetFiles(projekt_path, "*.SLDDRW", SearchOption.AllDirectories));
//iSwApp.SendMsgToUser2("Длина " + allDRW.Count, 4, 2);
foreach (string pdrw in allDRW)
{
key = pdrw.Substring(pdrw.LastIndexOf((char)92) + 1);
key = key.Substring(0, key.Length - 7);
if (!Dict.ContainsKey(key))
{
Dict.Add(key, pdrw.Substring(0, pdrw.Length - 7));
}
}
break;
}
case 6:
{
key = swModel.GetPathName().Substring(swModel.GetPathName().LastIndexOf((char)92) + 1);
key = key.Substring(0, key.Length - 7);
pathName = swModel.GetPathName();
pathName = pathName.Remove(pathName.Length - 7);
if (!Dict.ContainsKey(key))
{
Dict.Add(key, pathName);
}
//Создаем список путей компонентов для всех конфигураций
сonfNames = (string[])swModel.GetConfigurationNames();
swAssy.ResolveAllLightWeightComponents(false);
for (int i = 0; i < сonfNames.Length; i++)
{
swModel.ShowConfiguration2((string)сonfNames[i]);
swModel.ForceRebuild3(false);
Comps = (object[])swAssy.GetComponents(false);
for (int j = 0; j < Comps.Length; j++)
{
swComp = (Component2)Comps[j];
//compDoc = (ModelDoc2)swComp.GetModelDoc2();
if ((swComp.GetSuppression() != (int)swComponentSuppressionState_e.swComponentSuppressed) & (swComp != null))
{
pathName = swComp.GetPathName();
pathName = pathName.Remove(pathName.Length - 7);
key = swComp.GetPathName().Substring(swComp.GetPathName().LastIndexOf((char)92) + 1);
key = key.Substring(0, key.Length - 7);
if (!Dict.ContainsKey(key))
{
Dict.Add(key, pathName);
}
}
}
}
break;
}
default:
{
iSwApp.LoadAddIn(sAddinName);
return;
}
}
//Находим где могут быть чертежи
Drw = new Dictionary <string, string>();
foreach (KeyValuePair <string, string> k in Dict)
{
if (value == 6)
{
if ((k.Value.Contains((string)(pdm_path + "Проект"))) | (k.Value.Contains((pdm_path + "Общеприменяемые"))))
{
Drw.Add(k.Key, k.Value);
}
}
else
{
Drw.Add(k.Key, k.Value);
}
}
//Создаем папку
DirectoryInfo dirInfo = new DirectoryInfo(projekt_path + "\\TIF");
if (!dirInfo.Exists)
{
dirInfo.Create();
}
//Настройки TIF
iSwApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swTiffScreenOrPrintCapture, 1); //1-Print capture
iSwApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swTiffPrintPaperSize, 12); //12-Papers User Defined
iSwApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swTiffImageType, 0); //0-Black And White
iSwApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swTiffCompressionScheme, 2); //2-Group 4 Fax Compression
iSwApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swTiffPrintDPI, 600); //300-Integer value
//Сохраняем картинки
int itogo = 0;
StreamWriter writer = new StreamWriter(projekt_path + "TIF\\" + "Список" + ".txt", false);
foreach (KeyValuePair <string, string> k in Drw)
{
//Настройка размеров картинки
iSwApp.IGetTemplateSizes(k.Value + ".SLDDRW", out int PaperSize, out double Width, out double Height);
iSwApp.SetUserPreferenceDoubleValue((int)swUserPreferenceDoubleValue_e.swTiffPrintDrawingPaperWidth, Width); //Double value in meters
iSwApp.SetUserPreferenceDoubleValue((int)swUserPreferenceDoubleValue_e.swTiffPrintDrawingPaperHeight, Height); //Double value in meters
Part = (DrawingDoc)iSwApp.OpenDoc6(k.Value + ".SLDDRW", (int)swDocumentTypes_e.swDocDRAWING, (int)swOpenDocOptions_e.swOpenDocOptions_ViewOnly, "", ref errors, ref warnings);
if ((errors == 0) & (Part != null))
{
swModel = (ModelDoc2)Part;
swModelDocExt = (ModelDocExtension)swModel.Extension;
swModelDocExt.SaveAs2(projekt_path + "TIF\\" + k.Key + ".TIF", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, "", false, ref errors, ref warnings);
writer.WriteLine(k.Value.Substring(k.Value.LastIndexOf((char)92) + 1));
itogo += 1;
}
iSwApp.CloseDoc(k.Value + ".SLDDRW");
Part = null;
}
writer.Close();
iSwApp.LoadAddIn(sAddinName);
iSwApp.SendMsgToUser2("Всего частей " + Dict.Count + System.Environment.NewLine + "Чертежей сохранено " + itogo, 2, 2);
//iSwApp.CommandInProgress = false;
}
/// <summary>
///
/// </summary>
/// <param name="assemblyName"></param>
/// <param name="partsname"></param>
private void CreateNewAssembly(string assemblyName, List <string> partsname)
{
string assemblyDefaultPath = iswApp.GetDocumentTemplate(2, "", 0, 0, 0);
var part = iswApp.NewDocument(assemblyDefaultPath, 0, 0, 0);
if (part != null)
{
AssemblyDoc assemblyDoc = part as AssemblyDoc;
ModelDoc2 modelDoc2 = assemblyDoc as ModelDoc2;
ModelDocExtension swModExt = default(ModelDocExtension);
int errors = 0;
int warnings = 0;
swModExt = (ModelDocExtension)modelDoc2.Extension;
swModExt.SaveAs(assemblyName,
(int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, errors, warnings);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
int i = 0;
int tempV = ProgressBar.Value;
foreach (var partN in partsname)
{
labStatus.Text = "正在装配-->" + Path.GetFileNameWithoutExtension(partN);
ProgressBar.Value = tempV + i;
iswApp.OpenDoc6(partN.ToString(), 1, 32, "", ref errors, ref warnings);
assemblyDoc = (AssemblyDoc)iswApp.ActivateDoc3(System.IO.Path.GetFileNameWithoutExtension(assemblyName) + ".sldasm", true, 0, errors);
Component2 swInsertedComponent = default(Component2);
swInsertedComponent = assemblyDoc.AddComponent5(partN, 0, "", false, "", 0, 0, 0);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
modelDoc2.ClearSelection2(true);
modelDoc2.Extension.SelectByID2(swInsertedComponent.GetSelectByIDString(), "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDoc.UnfixComponent();
modelDoc2.ClearSelection2(true);
modelDoc2.Extension.SelectByID2("Point1@Origin@" + swInsertedComponent.GetSelectByIDString(), "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
modelDoc2.Extension.SelectByID2("Point1@Origin", "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
Mate2 mate2 = default(Mate2);
mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0, 0, 0, 0.001, 0, 0, 0, false, false, 0, out int warings);
modelDoc2.ClearSelection2(true);
modelDoc2.EditRebuild3();
iswApp.CloseDoc(partN);
i = i + 1;
}
iswApp.ActivateDoc3(System.IO.Path.GetFileNameWithoutExtension(assemblyName) + ".sldasm", true, 0, errors);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
modelDoc2.ShowNamedView2("*等轴测", 7);
modelDoc2.ViewZoomtofit2();
modelDoc2.Save();
}
ProgressBar.Value = ProgressBar.Maximum;
}
private void saveSTL(link Link, string windowsMeshFileName)
{
int errors = 0;
int warnings = 0;
string coordsysName = "";
coordsysName = (Link.Joint == null || Link.Joint.CoordinateSystemName == null) ? Link.CoordSysName : Link.Joint.CoordinateSystemName;
Dictionary <string, string> names = GetComponentRefGeoNames(coordsysName);
ModelDoc2 ActiveDoc = ActiveSWModel;
string ComponentName = "";
string ConfigurationName = "";
string DisplayStateName = "";
Component2 geoComponent = default(Component2);
if (names["component"].Length > 0)
{
foreach (Component2 comp in Link.SWcomponents)
{
if (comp.Name2 == names["component"])
{
geoComponent = comp;
ComponentName = comp.GetPathName();
ConfigurationName = comp.ReferencedConfiguration;
DisplayStateName = comp.ReferencedDisplayState;
bool usenamed = comp.UseNamedConfiguration;
ActiveDoc = (ModelDoc2)iSwApp.ActivateDoc3(ComponentName, false, 0, 0);
Configuration config = ActiveDoc.GetConfigurationByName(ConfigurationName);
ActiveDoc.ShowConfiguration2(ConfigurationName);
config.ApplyDisplayState(DisplayStateName);
}
break;
}
}
if (ComponentName.Length == 0)
{
Common.showComponents(ActiveSWModel, Link.SWcomponents);
}
int saveOptions = (int)swSaveAsOptions_e.swSaveAsOptions_Silent;
setLinkSpecificSTLPreferences(names["geo"], Link.STLQualityFine, ActiveDoc);
ActiveDoc.Extension.SaveAs(windowsMeshFileName, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, saveOptions, null, ref errors, ref warnings);
if (ComponentName.Length > 0)
{
iSwApp.CloseDoc(ComponentName);
geoComponent.ReferencedConfiguration = ConfigurationName;
}
else
{
Common.hideComponents(ActiveSWModel, Link.SWcomponents);
}
correctSTLMesh(windowsMeshFileName);
}
static void CloseModel(IModelDoc2 swModel, ISldWorks swApp)
{
swApp.CloseDoc(swModel.GetTitle().ToLower().Contains(".sldprt") ? swModel.GetTitle() : swModel.GetTitle() + ".sldprt");
}