/// <summary>
/// Creates a Project, Site, or Building GUID. If a shared parameter is set with a valid IFC GUID value,
/// that value will override the default one.
/// </summary>
/// <param name="document">The document.</param>
/// <param name="guidType">The GUID being created.</param>
/// <returns>The IFC GUID value.</returns>
/// <remarks>For Sites, the user should only use this routine if there is no Site element in the file. Otherwise, they
/// should use CreateSiteGUID below, which takes an Element pointer.</remarks>
static public string CreateProjectLevelGUID(Document document, ProjectLevelGUIDType guidType)
{
string parameterName = "Ifc" + guidType.ToString() + " GUID";
ProjectInfo projectInfo = document.ProjectInformation;
BuiltInParameter parameterId = BuiltInParameter.INVALID;
switch (guidType)
{
case ProjectLevelGUIDType.Building:
parameterId = BuiltInParameter.IFC_BUILDING_GUID;
break;
case ProjectLevelGUIDType.Project:
parameterId = BuiltInParameter.IFC_PROJECT_GUID;
break;
case ProjectLevelGUIDType.Site:
parameterId = BuiltInParameter.IFC_SITE_GUID;
break;
default:
// This should eventually log an error.
return(null);
}
if (projectInfo != null)
{
string paramValue = null;
ParameterUtil.GetStringValueFromElement(projectInfo, parameterName, out paramValue);
if (!IsValidIFCGUID(paramValue) && parameterId != BuiltInParameter.INVALID)
{
ParameterUtil.GetStringValueFromElement(projectInfo, parameterId, out paramValue);
}
if (IsValidIFCGUID(paramValue))
{
return(paramValue);
}
}
ElementId projectLevelElementId = new ElementId((int)guidType);
System.Guid guid = ExportUtils.GetExportId(document, projectLevelElementId);
string ifcGUID = ConvertToIFCGuid(guid);
if ((projectInfo != null) && ExporterCacheManager.ExportOptionsCache.GUIDOptions.StoreIFCGUID)
{
if (parameterId != BuiltInParameter.INVALID)
{
ExporterCacheManager.GUIDsToStoreCache[new KeyValuePair <ElementId, BuiltInParameter>(projectInfo.Id, parameterId)] = ifcGUID;
}
}
return(ifcGUID);
}
/// <summary>
/// Creates a map between revit element ids and their IFC GUIDs inside the given document.
/// </summary>
/// <param name="doc">A revit document</param>
/// <param name="elements">A list of element ids</param>
/// <returns>The map between IFC GUIDs and revit element ids.</returns>
public static Dictionary <string, ElementId> GetIfcGuidElementIdMap(this Document doc,
IEnumerable <ElementId> elements)
{
var map = new Dictionary <string, ElementId>();
foreach (ElementId element in elements)
{
var ifcGuid = IfcGuid.ToIfcGuid(ExportUtils.GetExportId(doc, element));
if (!map.ContainsKey(ifcGuid))
{
map.Add(ifcGuid, element);
}
}
return(map);
}
static private string CreateGUIDBase(Element element, BuiltInParameter parameterName, out bool shouldStore)
{
shouldStore = false;
string ifcGUID = null;
if (ExporterCacheManager.ExportOptionsCache.GUIDOptions.AllowGUIDParameterOverride)
{
ParameterUtil.GetStringValueFromElement(element, parameterName, out ifcGUID);
}
if (!IsValidIFCGUID(ifcGUID))
{
System.Guid guid = ExportUtils.GetExportId(element.Document, element.Id);
ifcGUID = ConvertToIFCGuid(guid);
shouldStore = true;
}
return(ifcGUID);
}
static private string CreateGUIDBase(Element element, BuiltInParameter parameterName, out bool shouldStore)
{
string ifcGUID = null;
shouldStore = CanStoreGUID(element);
// Avoid getting into an object if the object is part of the Group. It may cause regrenerate that invalidate other ElementIds
if (shouldStore && ExporterCacheManager.ExportOptionsCache.GUIDOptions.AllowGUIDParameterOverride)
{
ParameterUtil.GetStringValueFromElement(element, parameterName, out ifcGUID);
}
if (!IsValidIFCGUID(ifcGUID))
{
System.Guid guid = ExportUtils.GetExportId(element.Document, element.Id);
ifcGUID = ConvertToIFCGuid(guid);
}
return(ifcGUID);
}
/// <summary>
/// Generate Viewpoint
/// </summary>
/// <param name="elemCheck"></param>
/// <returns></returns>
public VisualizationInfo generateViewpoint(int elemCheck)
{
try
{
UIDocument uidoc = uiapp.ActiveUIDocument;
Document doc = uidoc.Document;
VisualizationInfo v = new VisualizationInfo();
XYZ centerIMP = new XYZ();
string type = "";
double zoomValue = 1;
if (uidoc.ActiveView.ViewType != ViewType.ThreeD) //is a 2D view
{
XYZ TL = uidoc.GetOpenUIViews()[0].GetZoomCorners()[0];
XYZ BR = uidoc.GetOpenUIViews()[0].GetZoomCorners()[1];
v.SheetCamera = new SheetCamera();
v.SheetCamera.SheetID = uidoc.ActiveView.Id.IntegerValue;
v.SheetCamera.TopLeft = new IssueTracker.Classes.BCF2.Point(TL.X, TL.Y, TL.Z);
v.SheetCamera.BottomRight = new IssueTracker.Classes.BCF2.Point(BR.X, BR.Y, BR.Z);
}
else
{
View3D view3D = (View3D)uidoc.ActiveView;
if (!view3D.IsPerspective) //IS ORTHO
{
XYZ TL = uidoc.GetOpenUIViews()[0].GetZoomCorners()[0];
XYZ BR = uidoc.GetOpenUIViews()[0].GetZoomCorners()[1];
double xO = (TL.X + BR.X) / 2;
double yO = (TL.Y + BR.Y) / 2;
double zO = (TL.Z + BR.Z) / 2;
//converto to METERS
centerIMP = new XYZ(xO, yO, zO);
double dist = TL.DistanceTo(BR) / 2; //custom sectet value to get solibri zoom value from Corners of Revit UiView
XYZ diagVector = TL.Subtract(BR);
// **** CUSTOM VALUE FOR TEKLA **** //
//zoomValue = UnitUtils.ConvertFromInternalUnits(dist * Math.Sin(diagVector.AngleTo(view3D.RightDirection)), DisplayUnitType.DUT_METERS);
// **** CUSTOM VALUE FOR TEKLA **** //
double customZoomValue = (MyProjectSettings.Get("useDefaultZoom", doc.PathName) == "1") ? 1 : 2.5;
zoomValue = UnitUtils.ConvertFromInternalUnits(dist * Math.Sin(diagVector.AngleTo(view3D.RightDirection)), DisplayUnitType.DUT_METERS) * customZoomValue;
type = "OrthogonalCamera";
}
else // it is a perspective view
{
centerIMP = uidoc.ActiveView.Origin;
type = "PerspectiveCamera";
zoomValue = 45;
}
ViewOrientation3D t = ConvertBasePoint(centerIMP, uidoc.ActiveView.ViewDirection, uidoc.ActiveView.UpDirection, false);
//ViewOrientation3D t = new ViewOrientation3D(centerIMP, uidoc.ActiveView.UpDirection, uidoc.ActiveView.ViewDirection);
XYZ c = t.EyePosition;
XYZ vi = t.ForwardDirection;
XYZ up = t.UpDirection;
if (type == "OrthogonalCamera")
{
v.OrthogonalCamera = new OrthogonalCamera();
v.OrthogonalCamera.CameraViewPoint.X = UnitUtils.ConvertFromInternalUnits(c.X, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraViewPoint.Y = UnitUtils.ConvertFromInternalUnits(c.Y, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraViewPoint.Z = UnitUtils.ConvertFromInternalUnits(c.Z, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.X = UnitUtils.ConvertFromInternalUnits(up.X, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.Y = UnitUtils.ConvertFromInternalUnits(up.Y, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.Z = UnitUtils.ConvertFromInternalUnits(up.Z, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraDirection.X = UnitUtils.ConvertFromInternalUnits(vi.X, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.CameraDirection.Y = UnitUtils.ConvertFromInternalUnits(vi.Y, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.CameraDirection.Z = UnitUtils.ConvertFromInternalUnits(vi.Z, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.ViewToWorldScale = zoomValue;
}
else
{
v.PerspectiveCamera = new PerspectiveCamera();
v.PerspectiveCamera.CameraViewPoint.X = UnitUtils.ConvertFromInternalUnits(c.X, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraViewPoint.Y = UnitUtils.ConvertFromInternalUnits(c.Y, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraViewPoint.Z = UnitUtils.ConvertFromInternalUnits(c.Z, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.X = UnitUtils.ConvertFromInternalUnits(up.X, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.Y = UnitUtils.ConvertFromInternalUnits(up.Y, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.Z = UnitUtils.ConvertFromInternalUnits(up.Z, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraDirection.X = UnitUtils.ConvertFromInternalUnits(vi.X, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.CameraDirection.Y = UnitUtils.ConvertFromInternalUnits(vi.Y, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.CameraDirection.Z = UnitUtils.ConvertFromInternalUnits(vi.Z, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.FieldOfView = zoomValue;
}
// handle section box if enabled
if (view3D.IsSectionBoxActive)
{
BoundingBoxXYZ sectionBox = view3D.GetSectionBox();
// Note that the section box can be rotated and transformed.
// So the min/max corners coordinates relative to the model must be computed via the transform.
Transform trf = sectionBox.Transform;
XYZ max = sectionBox.Max; //Maximum coordinates (upper-right-front corner of the box before transform is applied).
XYZ min = sectionBox.Min; //Minimum coordinates (lower-left-rear corner of the box before transform is applied).
// Transform the min and max to model coordinates
XYZ maxInModelCoords = trf.OfPoint(max);
XYZ minInModelCoords = trf.OfPoint(min);
// Convert to project unit
DisplayUnitType lengthUnitType = doc.GetUnits().GetFormatOptions(UnitType.UT_Length).DisplayUnits;
maxInModelCoords = new XYZ(UnitUtils.ConvertFromInternalUnits(maxInModelCoords.X, lengthUnitType),
UnitUtils.ConvertFromInternalUnits(maxInModelCoords.Y, lengthUnitType),
UnitUtils.ConvertFromInternalUnits(maxInModelCoords.Z, lengthUnitType));
minInModelCoords = new XYZ(UnitUtils.ConvertFromInternalUnits(minInModelCoords.X, lengthUnitType),
UnitUtils.ConvertFromInternalUnits(minInModelCoords.Y, lengthUnitType),
UnitUtils.ConvertFromInternalUnits(minInModelCoords.Z, lengthUnitType));
// Convert to shared coordinates
maxInModelCoords = ARUP.IssueTracker.Revit.Classes.Utils.ConvertToFromSharedCoordinate(doc, maxInModelCoords, false);
minInModelCoords = ARUP.IssueTracker.Revit.Classes.Utils.ConvertToFromSharedCoordinate(doc, minInModelCoords, false);
// Add to BCF clipping planes
v.ClippingPlanes = BcfAdapter.GetClippingPlanesFromBoundingBox
(
maxInModelCoords.X, maxInModelCoords.Y, maxInModelCoords.Z,
minInModelCoords.X, minInModelCoords.Y, minInModelCoords.Z
);
}
}
//COMPONENTS PART
FilteredElementCollector collector = new FilteredElementCollector(doc, doc.ActiveView.Id).WhereElementIsNotElementType();
System.Collections.Generic.ICollection <ElementId> collection = null;
if (elemCheck == 0)
{
collection = collector.ToElementIds();
}
else if (elemCheck == 1)
{
collection = uidoc.Selection.GetElementIds();
}
if (null != collection && collection.Any())
{
v.Components = new List <IssueTracker.Classes.BCF2.Component>();
foreach (var eId in collection)
{
Guid guid = ExportUtils.GetExportId(doc, eId);
string ifcguid = IfcGuid.ToIfcGuid(guid).ToString();
v.Components.Add(new ARUP.IssueTracker.Classes.BCF2.Component(doc.Application.VersionName, eId.ToString(), ifcguid));
}
}
return(v);
}
catch (System.Exception ex1)
{
TaskDialog.Show("Error!", "exception: " + ex1);
}
return(null);
}
//<summary>
//Generate a VisualizationInfo of the current view
//</summary>
//<returns></returns>
private VisualizationInfo GenerateViewpoint()
{
try
{
var uidoc = uiapp.ActiveUIDocument;
var doc = uidoc.Document;
var v = new VisualizationInfo();
//Corners of the active UI view
var topLeft = uidoc.GetOpenUIViews()[0].GetZoomCorners()[0];
var bottomRight = uidoc.GetOpenUIViews()[0].GetZoomCorners()[1];
//It's a 2D view
//not supported by BCF, but I store it under a custom
//fields using 2D coordinates and sheet id
if (uidoc.ActiveView.ViewType != ViewType.ThreeD)
{
v.SheetCamera = new SheetCamera
{
SheetID = uidoc.ActiveView.Id.IntegerValue,
TopLeft = new Point {
X = topLeft.X, Y = topLeft.Y, Z = topLeft.Z
},
BottomRight = new Point {
X = bottomRight.X, Y = bottomRight.Y, Z = bottomRight.Z
}
};
}
//It's a 3d view
else
{
var viewCenter = new XYZ();
var view3D = (View3D)uidoc.ActiveView;
double zoomValue = 1;
// it is a orthogonal view
if (!view3D.IsPerspective)
{
double x = (topLeft.X + bottomRight.X) / 2;
double y = (topLeft.Y + bottomRight.Y) / 2;
double z = (topLeft.Z + bottomRight.Z) / 2;
//center of the UI view
viewCenter = new XYZ(x, y, z);
//vector going from BR to TL
XYZ diagVector = topLeft.Subtract(bottomRight);
//lenght of the vector
double dist = topLeft.DistanceTo(bottomRight) / 2;
//ViewToWorldScale value
zoomValue = dist * Math.Sin(diagVector.AngleTo(view3D.RightDirection)).ToMeters();
// **** CUSTOM VALUE FOR TEKLA **** //
// calculated sperimentally, not sure why but it works
//if (UserSettings.Get("optTekla") == "1")
// zoomValue = zoomValue * 2.5;
// **** CUSTOM VALUE FOR TEKLA **** //
ViewOrientation3D t = RevitUtils.ConvertBasePoint(doc, viewCenter, uidoc.ActiveView.ViewDirection,
uidoc.ActiveView.UpDirection, false);
XYZ c = t.EyePosition;
XYZ vi = t.ForwardDirection;
XYZ up = t.UpDirection;
v.OrthogonalCamera = new OrthogonalCamera
{
CameraViewPoint =
{
X = c.X.ToMeters(),
Y = c.Y.ToMeters(),
Z = c.Z.ToMeters()
},
CameraUpVector =
{
X = up.X.ToMeters(),
Y = up.Y.ToMeters(),
Z = up.Z.ToMeters()
},
CameraDirection =
{
X = vi.X.ToMeters() * -1,
Y = vi.Y.ToMeters() * -1,
Z = vi.Z.ToMeters() * -1
},
ViewToWorldScale = zoomValue
};
}
// it is a perspective view
else
{
viewCenter = uidoc.ActiveView.Origin;
//revit default value
zoomValue = 45;
ViewOrientation3D t = RevitUtils.ConvertBasePoint(doc, viewCenter, uidoc.ActiveView.ViewDirection,
uidoc.ActiveView.UpDirection, false);
XYZ c = t.EyePosition;
XYZ vi = t.ForwardDirection;
XYZ up = t.UpDirection;
v.PerspectiveCamera = new PerspectiveCamera
{
CameraViewPoint =
{
X = c.X.ToMeters(),
Y = c.Y.ToMeters(),
Z = c.Z.ToMeters()
},
CameraUpVector =
{
X = up.X.ToMeters(),
Y = up.Y.ToMeters(),
Z = up.Z.ToMeters()
},
CameraDirection =
{
X = vi.X.ToMeters() * -1,
Y = vi.Y.ToMeters() * -1,
Z = vi.Z.ToMeters() * -1
},
FieldOfView = zoomValue
};
}
}
//COMPONENTS PART
string versionName = doc.Application.VersionName;
v.Components = new List <Component>();
var visibleElems = new FilteredElementCollector(doc, doc.ActiveView.Id)
.WhereElementIsNotElementType()
.WhereElementIsViewIndependent()
.ToElementIds();
var hiddenElems = new FilteredElementCollector(doc)
.WhereElementIsNotElementType()
.WhereElementIsViewIndependent()
.Where(x => x.IsHidden(doc.ActiveView) ||
!doc.ActiveView.IsElementVisibleInTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate, x.Id)).ToList();//would need to check how much this is affecting performance
var selectedElems = uidoc.Selection.GetElementIds();
//include only hidden elements and selected in the BCF
if (visibleElems.Count() > hiddenElems.Count())
{
foreach (var elem in hiddenElems)
{
v.Components.Add(new Component
{
OriginatingSystem = versionName,
IfcGuid = IfcGuid.ToIfcGuid(ExportUtils.GetExportId(doc, elem.Id)),
Visible = false,
Selected = false,
AuthoringToolId = elem.Id.IntegerValue.ToString()
});
}
foreach (var elem in selectedElems)
{
v.Components.Add(new Component
{
OriginatingSystem = versionName,
IfcGuid = IfcGuid.ToIfcGuid(ExportUtils.GetExportId(doc, elem)),
Visible = true,
Selected = true,
AuthoringToolId = elem.IntegerValue.ToString()
});
}
}
//include only visigle elements
//all the others are hidden
else
{
foreach (var elem in visibleElems)
{
v.Components.Add(new Component
{
OriginatingSystem = versionName,
IfcGuid = IfcGuid.ToIfcGuid(ExportUtils.GetExportId(doc, elem)),
Visible = true,
Selected = selectedElems.Contains(elem),
AuthoringToolId = elem.IntegerValue.ToString()
});
}
}
return(v);
}
catch (System.Exception ex1)
{
TaskDialog.Show("Error generating viewpoint", "exception: " + ex1);
}
return(null);
}
/// <summary>
/// Generate Viewpoint
/// </summary>
/// <param name="elemCheck"></param>
/// <returns></returns>
private VisualizationInfo generateViewpoint(int elemCheck)
{
try
{
UIDocument uidoc = uiapp.ActiveUIDocument;
Document doc = uidoc.Document;
VisualizationInfo v = new VisualizationInfo();
XYZ centerIMP = new XYZ();
string type = "";
double zoomValue = 1;
if (uidoc.ActiveView.ViewType != ViewType.ThreeD) //is a 2D view
{
XYZ TL = uidoc.GetOpenUIViews()[0].GetZoomCorners()[0];
XYZ BR = uidoc.GetOpenUIViews()[0].GetZoomCorners()[1];
v.SheetCamera = new SheetCamera();
v.SheetCamera.SheetID = uidoc.ActiveView.Id.IntegerValue;
v.SheetCamera.TopLeft = new IssueTracker.Data.Point(TL.X, TL.Y, TL.Z);
v.SheetCamera.BottomRight = new IssueTracker.Data.Point(BR.X, BR.Y, BR.Z);
}
else
{
View3D view3D = (View3D)uidoc.ActiveView;
if (!view3D.IsPerspective) //IS ORTHO
{
XYZ TL = uidoc.GetOpenUIViews()[0].GetZoomCorners()[0];
XYZ BR = uidoc.GetOpenUIViews()[0].GetZoomCorners()[1];
double xO = (TL.X + BR.X) / 2;
double yO = (TL.Y + BR.Y) / 2;
double zO = (TL.Z + BR.Z) / 2;
//converto to METERS
centerIMP = new XYZ(xO, yO, zO);
double dist = TL.DistanceTo(BR) / 2; //custom value to get solibri zoom value from Corners of Revit UiView
XYZ diagVector = TL.Subtract(BR);
double customZoomValue = (ProjectSettings.Get("useDefaultZoom", doc.PathName) == "1") ? 1 : 2.5;
zoomValue = UnitUtils.ConvertFromInternalUnits(dist * Math.Sin(diagVector.AngleTo(view3D.RightDirection)), DisplayUnitType.DUT_METERS) * customZoomValue;
type = "OrthogonalCamera";
}
else // it is a perspective view
{
centerIMP = uidoc.ActiveView.Origin;
type = "PerspectiveCamera";
zoomValue = 45;
}
ViewOrientation3D t = ConvertBasePoint(centerIMP, uidoc.ActiveView.ViewDirection, uidoc.ActiveView.UpDirection, false);
XYZ c = t.EyePosition;
XYZ vi = t.ForwardDirection;
XYZ up = t.UpDirection;
if (type == "OrthogonalCamera")
{
v.OrthogonalCamera = new OrthogonalCamera();
v.OrthogonalCamera.CameraViewPoint.X = UnitUtils.ConvertFromInternalUnits(c.X, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraViewPoint.Y = UnitUtils.ConvertFromInternalUnits(c.Y, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraViewPoint.Z = UnitUtils.ConvertFromInternalUnits(c.Z, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.X = UnitUtils.ConvertFromInternalUnits(up.X, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.Y = UnitUtils.ConvertFromInternalUnits(up.Y, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraUpVector.Z = UnitUtils.ConvertFromInternalUnits(up.Z, DisplayUnitType.DUT_METERS);
v.OrthogonalCamera.CameraDirection.X = UnitUtils.ConvertFromInternalUnits(vi.X, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.CameraDirection.Y = UnitUtils.ConvertFromInternalUnits(vi.Y, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.CameraDirection.Z = UnitUtils.ConvertFromInternalUnits(vi.Z, DisplayUnitType.DUT_METERS) * -1;
v.OrthogonalCamera.ViewToWorldScale = zoomValue;
}
else
{
v.PerspectiveCamera = new PerspectiveCamera();
v.PerspectiveCamera.CameraViewPoint.X = UnitUtils.ConvertFromInternalUnits(c.X, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraViewPoint.Y = UnitUtils.ConvertFromInternalUnits(c.Y, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraViewPoint.Z = UnitUtils.ConvertFromInternalUnits(c.Z, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.X = UnitUtils.ConvertFromInternalUnits(up.X, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.Y = UnitUtils.ConvertFromInternalUnits(up.Y, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraUpVector.Z = UnitUtils.ConvertFromInternalUnits(up.Z, DisplayUnitType.DUT_METERS);
v.PerspectiveCamera.CameraDirection.X = UnitUtils.ConvertFromInternalUnits(vi.X, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.CameraDirection.Y = UnitUtils.ConvertFromInternalUnits(vi.Y, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.CameraDirection.Z = UnitUtils.ConvertFromInternalUnits(vi.Z, DisplayUnitType.DUT_METERS) * -1;
v.PerspectiveCamera.FieldOfView = zoomValue;
}
}
//COMPONENTS PART
FilteredElementCollector collector = new FilteredElementCollector(doc, doc.ActiveView.Id).WhereElementIsNotElementType();
System.Collections.Generic.ICollection <ElementId> collection = null;
if (elemCheck == 0)
{
collection = collector.ToElementIds();
}
else if (elemCheck == 1)
{
collection = uidoc.Selection.GetElementIds();
}
if (null != collection && collection.Any())
{
v.Components = new IssueTracker.Data.Component[collection.Count];
for (var i = 0; i < collection.Count; i++)
{
Guid guid = ExportUtils.GetExportId(doc, collection.ElementAt(i));
string ifcguid = IfcGuid.ToIfcGuid(guid).ToString();
;
v.Components[i] = new Case.IssueTracker.Data.Component(doc.Application.VersionName, collection.ElementAt(i).ToString(), ifcguid);
}
}
return(v);
}
catch (System.Exception ex1)
{
TaskDialog.Show("Error!", "exception: " + ex1);
}
return(null);
}
/// <summary>
/// External Event Implementation
/// </summary>
/// <param name="app"></param>
public void Execute(UIApplication app)
{
try
{
UIDocument uidoc = app.ActiveUIDocument;
Document doc = uidoc.Document;
var uniqueView = UserSettings.GetBool("alwaysNewView");
// IS ORTHOGONAL
if (v.OrthogonalCamera != null)
{
if (v.OrthogonalCamera.CameraViewPoint == null || v.OrthogonalCamera.CameraUpVector == null || v.OrthogonalCamera.CameraDirection == null)
{
return;
}
//type = "OrthogonalCamera";
var zoom = v.OrthogonalCamera.ViewToWorldScale.ToFeet();
var cameraDirection = RevitUtils.GetRevitXYZ(v.OrthogonalCamera.CameraDirection);
var cameraUpVector = RevitUtils.GetRevitXYZ(v.OrthogonalCamera.CameraUpVector);
var cameraViewPoint = RevitUtils.GetRevitXYZ(v.OrthogonalCamera.CameraViewPoint);
var orient3D = RevitUtils.ConvertBasePoint(doc, cameraViewPoint, cameraDirection, cameraUpVector, true);
View3D orthoView = null;
//if active view is 3d ortho use it
if (doc.ActiveView.ViewType == ViewType.ThreeD)
{
var activeView3D = doc.ActiveView as View3D;
if (!activeView3D.IsPerspective)
{
orthoView = activeView3D;
}
}
if (orthoView == null)
{
//try to use an existing 3D view
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
if (viewcollector3D.Any(o => o.Name == "{3D}" || o.Name == "BCFortho"))
{
orthoView = viewcollector3D.First(o => o.Name == "{3D}" || o.Name == "BCFortho");
}
}
using (var trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open orthogonal view") == TransactionStatus.Started)
{
//create a new 3d ortho view
if (orthoView == null || uniqueView)
{
orthoView = View3D.CreateIsometric(doc, getFamilyViews(doc).First().Id);
orthoView.Name = (uniqueView) ? "BCFortho" + DateTime.Now.ToString("yyyyMMddTHHmmss") : "BCFortho";
}
else
{
//reusing an existing view, I net to reset the visibility
//placed this here because if set afterwards it doesn't work
orthoView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
}
orthoView.SetOrientation(orient3D);
trans.Commit();
}
}
uidoc.ActiveView = orthoView;
//adjust view rectangle
// **** CUSTOM VALUE FOR TEKLA **** //
// double x = zoom / 2.5;
// **** CUSTOM VALUE FOR TEKLA **** //
double x = zoom;
//if(MySettings.Get("optTekla")=="1")
// x = zoom / 2.5;
//set UI view position and zoom
XYZ m_xyzTl = uidoc.ActiveView.Origin.Add(uidoc.ActiveView.UpDirection.Multiply(x)).Subtract(uidoc.ActiveView.RightDirection.Multiply(x));
XYZ m_xyzBr = uidoc.ActiveView.Origin.Subtract(uidoc.ActiveView.UpDirection.Multiply(x)).Add(uidoc.ActiveView.RightDirection.Multiply(x));
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
//perspective
else if (v.PerspectiveCamera != null)
{
if (v.PerspectiveCamera.CameraViewPoint == null || v.PerspectiveCamera.CameraUpVector == null || v.PerspectiveCamera.CameraDirection == null)
{
return;
}
//not used since the fov cannot be changed in Revit
var zoom = v.PerspectiveCamera.FieldOfView;
//FOV - not used
//double z1 = 18 / Math.Tan(zoom / 2 * Math.PI / 180);
//double z = 18 / Math.Tan(25 / 2 * Math.PI / 180);
//double factor = z1 - z;
var cameraDirection = RevitUtils.GetRevitXYZ(v.PerspectiveCamera.CameraDirection);
var cameraUpVector = RevitUtils.GetRevitXYZ(v.PerspectiveCamera.CameraUpVector);
var cameraViewPoint = RevitUtils.GetRevitXYZ(v.PerspectiveCamera.CameraViewPoint);
var orient3D = RevitUtils.ConvertBasePoint(doc, cameraViewPoint, cameraDirection, cameraUpVector, true);
View3D perspView = null;
//try to use an existing 3D view
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
if (viewcollector3D.Any(o => o.Name == "BCFpersp"))
{
perspView = viewcollector3D.First(o => o.Name == "BCFpersp");
}
using (var trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open perspective view") == TransactionStatus.Started)
{
if (null == perspView || uniqueView)
{
perspView = View3D.CreatePerspective(doc, getFamilyViews(doc).First().Id);
perspView.Name = (uniqueView) ? "BCFpersp" + DateTime.Now.ToString("yyyyMMddTHHmmss") : "BCFpersp";
}
else
{
//reusing an existing view, I net to reset the visibility
//placed this here because if set afterwards it doesn't work
perspView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
}
perspView.SetOrientation(orient3D);
// turn off the far clip plane
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(0);
}
perspView.CropBoxActive = true;
perspView.CropBoxVisible = true;
trans.Commit();
}
}
uidoc.ActiveView = perspView;
}
//sheet
else if (v.SheetCamera != null)
{
IEnumerable <View> viewcollectorSheet = getSheets(doc, v.SheetCamera.SheetID);
if (!viewcollectorSheet.Any())
{
MessageBox.Show("View " + v.SheetCamera.SheetName + " with Id=" + v.SheetCamera.SheetID + " not found.");
return;
}
uidoc.ActiveView = viewcollectorSheet.First();
uidoc.RefreshActiveView();
XYZ m_xyzTl = new XYZ(v.SheetCamera.TopLeft.X, v.SheetCamera.TopLeft.Y, v.SheetCamera.TopLeft.Z);
XYZ m_xyzBr = new XYZ(v.SheetCamera.BottomRight.X, v.SheetCamera.BottomRight.Y, v.SheetCamera.BottomRight.Z);
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
//no view included
else
{
return;
}
if (v.Components == null)
{
return;
}
var elementsToSelect = new List <ElementId>();
var elementsToHide = new List <ElementId>();
var elementsToShow = new List <ElementId>();
var visibleElems = new FilteredElementCollector(doc, doc.ActiveView.Id)
.WhereElementIsNotElementType()
.WhereElementIsViewIndependent()
.ToElementIds()
.Where(e => doc.GetElement(e).CanBeHidden(doc.ActiveView)); //might affect performance, but it's necessary
bool canSetVisibility = (v.Components.Visibility != null &&
v.Components.Visibility.DefaultVisibilitySpecified &&
v.Components.Visibility.Exceptions.Any())
;
bool canSetSelection = (v.Components.Selection != null && v.Components.Selection.Any());
//loop elements
foreach (var e in visibleElems)
{
var guid = IfcGuid.ToIfcGuid(ExportUtils.GetExportId(doc, e));
if (canSetVisibility)
{
if (v.Components.Visibility.DefaultVisibility)
{
if (v.Components.Visibility.Exceptions.Any(x => x.IfcGuid == guid))
{
elementsToHide.Add(e);
}
}
else
{
if (v.Components.Visibility.Exceptions.Any(x => x.IfcGuid == guid))
{
elementsToShow.Add(e);
}
}
}
if (canSetSelection)
{
if (v.Components.Selection.Any(x => x.IfcGuid == guid))
{
elementsToSelect.Add(e);
}
}
}
using (var trans = new Transaction(uidoc.Document))
{
if (trans.Start("Apply BCF visibility and selection") == TransactionStatus.Started)
{
if (elementsToHide.Any())
{
doc.ActiveView.HideElementsTemporary(elementsToHide);
}
//there are no items to hide, therefore hide everything and just show the visible ones
else if (elementsToShow.Any())
{
doc.ActiveView.IsolateElementsTemporary(elementsToShow);
}
if (elementsToSelect.Any())
{
uidoc.Selection.SetElementIds(elementsToSelect);
}
}
trans.Commit();
}
uidoc.RefreshActiveView();
}
catch (Exception ex)
{
TaskDialog.Show("Error!", "exception: " + ex);
}
}
public static string GetIFCGuid(this Autodesk.Revit.DB.Element e)
{
var guid = ExportUtils.GetExportId(e.Document, e.Id);
return(ConvertToIFCGuid(guid));
}
static void AddConnection(ExporterIFC exporterIFC, Connector connector, Connector connected, bool isBiDirectional, bool isElectricalDomain)
{
// Port connection is changed in IFC4 to use IfcRelNests for static connection. IfcRelConnectsPortToElement is used for a dynamic connection and it is restricted to IfcDistributionElement
bool isIFC4AndAbove = !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4;
Element inElement = connector.Owner;
Element outElement = connected.Owner;
if (isElectricalDomain)
{
// We may get a connection back to the original element. Ignore it.
if (inElement.Id == outElement.Id)
{
return;
}
// Check the outElement to see if it is a Wire; if so, get its connections and "skip" the wire.
if (outElement is Wire)
{
if (m_ProcessedWires.Contains(outElement.Id))
{
return;
}
m_ProcessedWires.Add(outElement.Id);
ExporterCacheManager.SystemsCache.AddElectricalSystem((outElement as Wire).MEPSystem.Id);
try
{
ConnectorSet wireConnectorSet = MEPCache.GetConnectorsForWire(outElement as Wire);
if (wireConnectorSet != null)
{
foreach (Connector connectedToWire in wireConnectorSet)
{
ProcessConnections(exporterIFC, connectedToWire, connector);
}
}
}
catch
{
}
return;
}
}
// Check if the connection already exist
if (ConnectionExists(inElement.Id, outElement.Id))
{
return;
}
if (isBiDirectional)
{
if (ConnectionExists(outElement.Id, inElement.Id))
{
return;
}
}
IFCAnyHandle inElementIFCHandle = ExporterCacheManager.MEPCache.Find(inElement.Id);
IFCAnyHandle outElementIFCHandle = ExporterCacheManager.MEPCache.Find(outElement.Id);
// Note: In IFC4 the IfcRelConnectsPortToElement should be used for a dynamic connection. The static connection should use IfcRelNests
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (inElementIFCHandle == null || outElementIFCHandle == null ||
!IFCAnyHandleUtil.IsSubTypeOf(inElementIFCHandle, IFCEntityType.IfcObjectDefinition) ||
!IFCAnyHandleUtil.IsSubTypeOf(outElementIFCHandle, IFCEntityType.IfcObjectDefinition))
{
return;
}
}
else
{
if (inElementIFCHandle == null || outElementIFCHandle == null ||
!IFCAnyHandleUtil.IsSubTypeOf(inElementIFCHandle, IFCEntityType.IfcElement) ||
!IFCAnyHandleUtil.IsSubTypeOf(outElementIFCHandle, IFCEntityType.IfcElement))
{
return;
}
}
IFCFile ifcFile = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle portOut = null;
IFCAnyHandle portIn = null;
// Note: the GUIDs below are stable under the assumption that there is only one distribution
// port from element A to element B. Also, note that we don't need the "real" GUIDs for these
// elements, just stable ones.
string inGuid = ExportUtils.GetExportId(inElement.Document, inElement.Id).ToString();
string outGuid = ExportUtils.GetExportId(outElement.Document, outElement.Id).ToString();
string portInGuid = null;
string portOutGuid = null;
// ----------------------- In Port ----------------------
{
portInGuid = GUIDUtil.GenerateIFCGuidFrom("InPort" + connector.Id, inElement, outElement);
IFCFlowDirection flowDir = (isBiDirectional) ? IFCFlowDirection.SourceAndSink : IFCFlowDirection.Sink;
IFCAnyHandle localPlacement = CreateLocalPlacementForConnector(exporterIFC, connector, inElementIFCHandle, flowDir);
portIn = IFCInstanceExporter.CreateDistributionPort(exporterIFC, null, portInGuid, ownerHistory, localPlacement, null, flowDir);
string portType = "Flow"; // Assigned as Port.Description
ExporterCacheManager.MEPCache.CacheConnectorHandle(connector, portIn);
SetDistributionPortAttributes(portIn, connector, portType, inElement.Id, ref flowDir);
// Attach the port to the element
string guid = GUIDUtil.GenerateIFCGuidFrom("InPortRelConnects" + connector.Id, inElement, outElement);
string connectionName = inElement.Id + "|" + guid;
// Port connection is changed in IFC4 to use IfcRelNests for static connection. IfcRelConnectsPortToElement is used for a dynamic connection and it is restricted to IfcDistributionElement
// The following code collects the ports that are nested to the object to be assigned later
if (isIFC4AndAbove)
{
AddNestedMembership(inElementIFCHandle, portIn);
}
else
{
IFCInstanceExporter.CreateRelConnectsPortToElement(ifcFile, guid, ownerHistory, connectionName, portType, portIn, inElementIFCHandle);
}
}
// ----------------------- Out Port----------------------
{
portOutGuid = GUIDUtil.GenerateIFCGuidFrom("OutPort" + connector.Id, outElement, inElement);
IFCFlowDirection flowDir = (isBiDirectional) ? IFCFlowDirection.SourceAndSink : IFCFlowDirection.Source;
IFCAnyHandle localPlacement = CreateLocalPlacementForConnector(exporterIFC, connected, outElementIFCHandle, flowDir);
portOut = IFCInstanceExporter.CreateDistributionPort(exporterIFC, null, portOutGuid, ownerHistory, localPlacement, null, flowDir);
string portType = "Flow"; // Assigned as Port.Description
ExporterCacheManager.MEPCache.CacheConnectorHandle(connected, portOut);
SetDistributionPortAttributes(portOut, connected, portType, outElement.Id, ref flowDir);
// Attach the port to the element
string guid = GUIDUtil.GenerateIFCGuidFrom("OutPortRelConnects" + connector.Id.ToString(), outElement, inElement);
string connectionName = outElement.Id + "|" + guid;
// Port connection is changed in IFC4 to use IfcRelNests for static connection. IfcRelConnectsPortToElement is used for a dynamic connection and it is restricted to IfcDistributionElement
// The following code collects the ports that are nested to the object to be assigned later
if (isIFC4AndAbove)
{
AddNestedMembership(outElementIFCHandle, portOut);
}
else
{
IFCInstanceExporter.CreateRelConnectsPortToElement(ifcFile, guid, ownerHistory, connectionName, portType, portOut, outElementIFCHandle);
}
}
// ----------------------- Out Port -> In Port ----------------------
if (portOut != null && portIn != null)
{
IFCAnyHandle realizingElement = null;
string connectionName = portInGuid + "|" + portOutGuid;
string connectionType = "Flow"; // Assigned as Description
string guid = GUIDUtil.GenerateIFCGuidFrom(IFCEntityType.IfcRelConnectsPorts, portIn, portOut);
IFCInstanceExporter.CreateRelConnectsPorts(ifcFile, guid, ownerHistory, connectionName, connectionType, portIn, portOut, realizingElement);
AddConnectionInternal(inElement.Id, outElement.Id);
}
// Add the handles to the connector system.
HashSet <MEPSystem> systemList = new HashSet <MEPSystem>();
try
{
MEPSystem system = connector.MEPSystem;
if (system != null)
{
systemList.Add(system);
}
}
catch
{
}
if (isElectricalDomain)
{
foreach (MEPSystem system in systemList)
{
ExporterCacheManager.SystemsCache.AddElectricalSystem(system.Id);
ExporterCacheManager.SystemsCache.AddHandleToElectricalSystem(system.Id, inElementIFCHandle);
ExporterCacheManager.SystemsCache.AddHandleToElectricalSystem(system.Id, outElementIFCHandle);
ExporterCacheManager.SystemsCache.AddHandleToElectricalSystem(system.Id, portIn);
ExporterCacheManager.SystemsCache.AddHandleToElectricalSystem(system.Id, portOut);
}
}
else
{
foreach (MEPSystem system in systemList)
{
ExporterCacheManager.SystemsCache.AddHandleToBuiltInSystem(system, inElementIFCHandle);
ExporterCacheManager.SystemsCache.AddHandleToBuiltInSystem(system, outElementIFCHandle);
ExporterCacheManager.SystemsCache.AddHandleToBuiltInSystem(system, portIn);
ExporterCacheManager.SystemsCache.AddHandleToBuiltInSystem(system, portOut);
}
}
}
static private string CreateSimpleGUID(Element element)
{
Guid guid = ExportUtils.GetExportId(element.Document, element.Id);
return(ConvertToIFCGuid(guid));
}
/// <summary>
/// External Event Implementation
/// </summary>
/// <param name="app"></param>
public void Execute(UIApplication app)
{
try
{
UIDocument uidoc = app.ActiveUIDocument;
Document doc = uidoc.Document;
SelElementSet m_elementsToHide = SelElementSet.Create();
List <ElementId> elementids = new List <ElementId>();
// IS ORTHOGONAL
if (v.OrthogonalCamera != null)
{
if (v.OrthogonalCamera.ViewToWorldScale == null || v.OrthogonalCamera.CameraViewPoint == null || v.OrthogonalCamera.CameraUpVector == null || v.OrthogonalCamera.CameraDirection == null)
{
return;
}
//type = "OrthogonalCamera";
var zoom = UnitUtils.ConvertToInternalUnits(v.OrthogonalCamera.ViewToWorldScale, DisplayUnitType.DUT_METERS);
var CameraDirection = Utils.GetXYZ(v.OrthogonalCamera.CameraDirection.X, v.OrthogonalCamera.CameraDirection.Y, v.OrthogonalCamera.CameraDirection.Z);
var CameraUpVector = Utils.GetXYZ(v.OrthogonalCamera.CameraUpVector.X, v.OrthogonalCamera.CameraUpVector.Y, v.OrthogonalCamera.CameraUpVector.Z);
var CameraViewPoint = Utils.GetXYZ(v.OrthogonalCamera.CameraViewPoint.X, v.OrthogonalCamera.CameraViewPoint.Y, v.OrthogonalCamera.CameraViewPoint.Z);
var orient3d = Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D orthoView = null;
//if active view is 3d ortho use it
if (doc.ActiveView.ViewType == ViewType.ThreeD)
{
View3D ActiveView3D = doc.ActiveView as View3D;
if (!ActiveView3D.IsPerspective)
{
orthoView = ActiveView3D;
}
}
if (orthoView == null)
{
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
//try to use default 3D view
if (viewcollector3D.Any() && viewcollector3D.Where(o => o.Name == "{3D}" || o.Name == "BCFortho").Any())
{
orthoView = viewcollector3D.Where(o => o.Name == "{3D}" || o.Name == "BCFortho").First();
}
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open orthogonal view") == TransactionStatus.Started)
{
//create a new 3d ortho view
if (orthoView == null)
{
orthoView = View3D.CreateIsometric(doc, getFamilyViews(doc).First().Id);
orthoView.Name = "BCFortho";
}
orthoView.SetOrientation(orient3d);
trans.Commit();
}
}
uidoc.ActiveView = orthoView;
//adjust view rectangle
// **** CUSTOM VALUE FOR TEKLA **** //
// double x = touple.Item2
// **** CUSTOM VALUE FOR TEKLA **** //
double customZoomValue = (MyProjectSettings.Get("useDefaultZoom", doc.PathName) == "1") ? 1 : 2.5;
double x = zoom / customZoomValue;
XYZ m_xyzTl = uidoc.ActiveView.Origin.Add(uidoc.ActiveView.UpDirection.Multiply(x)).Subtract(uidoc.ActiveView.RightDirection.Multiply(x));
XYZ m_xyzBr = uidoc.ActiveView.Origin.Subtract(uidoc.ActiveView.UpDirection.Multiply(x)).Add(uidoc.ActiveView.RightDirection.Multiply(x));
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else if (v.PerspectiveCamera != null)
{
if (v.PerspectiveCamera.FieldOfView == null || v.PerspectiveCamera.CameraViewPoint == null || v.PerspectiveCamera.CameraUpVector == null || v.PerspectiveCamera.CameraDirection == null)
{
return;
}
var zoom = v.PerspectiveCamera.FieldOfView;
double z1 = 18 / Math.Tan(zoom / 2 * Math.PI / 180); //focale 1
double z = 18 / Math.Tan(25 / 2 * Math.PI / 180); //focale, da controllare il 18, vedi PDF
double factor = z1 - z;
var CameraDirection = Utils.GetXYZ(v.PerspectiveCamera.CameraDirection.X, v.PerspectiveCamera.CameraDirection.Y, v.PerspectiveCamera.CameraDirection.Z);
var CameraUpVector = Utils.GetXYZ(v.PerspectiveCamera.CameraUpVector.X, v.PerspectiveCamera.CameraUpVector.Y, v.PerspectiveCamera.CameraUpVector.Z);
XYZ oldO = Utils.GetXYZ(v.PerspectiveCamera.CameraViewPoint.X, v.PerspectiveCamera.CameraViewPoint.Y, v.PerspectiveCamera.CameraViewPoint.Z);
var CameraViewPoint = (oldO.Subtract(CameraDirection.Divide(factor)));
var orient3d = Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D perspView = null;
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
if (viewcollector3D.Any() && viewcollector3D.Where(o => o.Name == "BCFpersp").Any())
{
perspView = viewcollector3D.Where(o => o.Name == "BCFpersp").First();
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open perspective view") == TransactionStatus.Started)
{
if (null == perspView)
{
perspView = View3D.CreatePerspective(doc, getFamilyViews(doc).First().Id);
perspView.Name = "BCFpersp";
}
perspView.SetOrientation(orient3d);
// turn off the far clip plane with standard parameter API
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(0);
}
perspView.CropBoxActive = true;
perspView.CropBoxVisible = true;
trans.Commit();
}
}
uidoc.ActiveView = perspView;
}
else if (v.SheetCamera != null)//sheet
{
//using (Transaction trans = new Transaction(uidoc.Document))
//{
// if (trans.Start("Open sheet view") == TransactionStatus.Started)
// {
IEnumerable <View> viewcollectorSheet = getSheets(doc, v.SheetCamera.SheetID);
if (!viewcollectorSheet.Any())
{
MessageBox.Show("No Sheet with Id=" + v.SheetCamera.SheetID + " found.");
return;
}
uidoc.ActiveView = viewcollectorSheet.First();
uidoc.RefreshActiveView();
// trans.Commit();
// }
//}
XYZ m_xyzTl = new XYZ(v.SheetCamera.TopLeft.X, v.SheetCamera.TopLeft.Y,
v.SheetCamera.TopLeft.Z);
XYZ m_xyzBr = new XYZ(v.SheetCamera.BottomRight.X, v.SheetCamera.BottomRight.Y,
v.SheetCamera.BottomRight.Z);
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else
{
return;
}
//select/hide elements
if (v.Components != null && v.Components.Any())
{
FilteredElementCollector collector = new FilteredElementCollector(doc, doc.ActiveView.Id).WhereElementIsNotElementType();
System.Collections.Generic.ICollection <ElementId> collection = collector.ToElementIds();
foreach (var e in v.Components)
{
var bcfguid = IfcGuid.FromIfcGUID(e.IfcGuid);
var ids = collection.Where(o => bcfguid == ExportUtils.GetExportId(doc, o));
if (ids.Any())
{
m_elementsToHide.Add(doc.GetElement(ids.First()));
elementids.Add(ids.First());
}
}
if (null != m_elementsToHide && !m_elementsToHide.IsEmpty)
{
//do transaction only if there is something to hide/select
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Apply visibility/selection") == TransactionStatus.Started)
{
if (MySettings.Get("selattachedelems") == "0")
{
uidoc.ActiveView.IsolateElementsTemporary(elementids);
}
else
{
uidoc.Selection.Elements = m_elementsToHide;
}
}
trans.Commit();
}
}
}
uidoc.RefreshActiveView();
}
catch (Exception ex)
{
TaskDialog.Show("Error!", "exception: " + ex);
}
}
/// <summary>
/// External Event Implementation
/// </summary>
/// <param name="app"></param>
public void Execute(UIApplication app)
{
try
{
UIDocument uidoc = app.ActiveUIDocument;
Document doc = uidoc.Document;
SelElementSet m_elementsToHide = SelElementSet.Create();
List <ElementId> elementsToBeIsolated = new List <ElementId>();
List <ElementId> elementsToBeHidden = new List <ElementId>();
List <ElementId> elementsToBeSelected = new List <ElementId>();
// IS ORTHOGONAL
if (v.OrthogonalCamera != null)
{
if (v.OrthogonalCamera.ViewToWorldScale == null || v.OrthogonalCamera.CameraViewPoint == null || v.OrthogonalCamera.CameraUpVector == null || v.OrthogonalCamera.CameraDirection == null)
{
return;
}
//type = "OrthogonalCamera";
var zoom = UnitUtils.ConvertToInternalUnits(v.OrthogonalCamera.ViewToWorldScale, DisplayUnitType.DUT_METERS);
var CameraDirection = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.OrthogonalCamera.CameraDirection.X, v.OrthogonalCamera.CameraDirection.Y, v.OrthogonalCamera.CameraDirection.Z);
var CameraUpVector = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.OrthogonalCamera.CameraUpVector.X, v.OrthogonalCamera.CameraUpVector.Y, v.OrthogonalCamera.CameraUpVector.Z);
var CameraViewPoint = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.OrthogonalCamera.CameraViewPoint.X, v.OrthogonalCamera.CameraViewPoint.Y, v.OrthogonalCamera.CameraViewPoint.Z);
var orient3d = ARUP.IssueTracker.Revit.Classes.Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D orthoView = null;
//if active view is 3d ortho use it
if (doc.ActiveView.ViewType == ViewType.ThreeD)
{
View3D ActiveView3D = doc.ActiveView as View3D;
if (!ActiveView3D.IsPerspective)
{
orthoView = ActiveView3D;
}
}
if (orthoView == null)
{
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
//try to use default 3D view
if (viewcollector3D.Any() && viewcollector3D.Where(o => o.Name == "{3D}" || o.Name == "BCFortho").Any())
{
orthoView = viewcollector3D.Where(o => o.Name == "{3D}" || o.Name == "BCFortho").First();
}
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open orthogonal view") == TransactionStatus.Started)
{
//create a new 3d ortho view
if (orthoView == null)
{
orthoView = View3D.CreateIsometric(doc, getFamilyViews(doc).First().Id);
orthoView.Name = "BCFortho";
}
orthoView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
orthoView.SetOrientation(orient3d);
trans.Commit();
}
}
uidoc.ActiveView = orthoView;
//adjust view rectangle
// **** CUSTOM VALUE FOR TEKLA **** //
// double x = touple.Item2
// **** CUSTOM VALUE FOR TEKLA **** //
double customZoomValue = (MyProjectSettings.Get("useDefaultZoom", doc.PathName) == "1") ? 1 : 2.5;
double x = zoom / customZoomValue;
XYZ m_xyzTl = uidoc.ActiveView.Origin.Add(uidoc.ActiveView.UpDirection.Multiply(x)).Subtract(uidoc.ActiveView.RightDirection.Multiply(x));
XYZ m_xyzBr = uidoc.ActiveView.Origin.Subtract(uidoc.ActiveView.UpDirection.Multiply(x)).Add(uidoc.ActiveView.RightDirection.Multiply(x));
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else if (v.PerspectiveCamera != null)
{
if (v.PerspectiveCamera.FieldOfView == null || v.PerspectiveCamera.CameraViewPoint == null || v.PerspectiveCamera.CameraUpVector == null || v.PerspectiveCamera.CameraDirection == null)
{
return;
}
var zoom = v.PerspectiveCamera.FieldOfView;
double z1 = 18 / Math.Tan(zoom / 2 * Math.PI / 180); //focale 1
double z = 18 / Math.Tan(25 / 2 * Math.PI / 180); //focale, da controllare il 18, vedi PDF
double factor = z1 - z;
var CameraDirection = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.PerspectiveCamera.CameraDirection.X, v.PerspectiveCamera.CameraDirection.Y, v.PerspectiveCamera.CameraDirection.Z);
var CameraUpVector = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.PerspectiveCamera.CameraUpVector.X, v.PerspectiveCamera.CameraUpVector.Y, v.PerspectiveCamera.CameraUpVector.Z);
XYZ oldO = ARUP.IssueTracker.Revit.Classes.Utils.GetXYZ(v.PerspectiveCamera.CameraViewPoint.X, v.PerspectiveCamera.CameraViewPoint.Y, v.PerspectiveCamera.CameraViewPoint.Z);
var CameraViewPoint = (oldO.Subtract(CameraDirection.Divide(factor)));
var orient3d = ARUP.IssueTracker.Revit.Classes.Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D perspView = null;
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
if (viewcollector3D.Any() && viewcollector3D.Where(o => o.Name == "BCFpersp").Any())
{
perspView = viewcollector3D.Where(o => o.Name == "BCFpersp").First();
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open perspective view") == TransactionStatus.Started)
{
if (null == perspView)
{
perspView = View3D.CreatePerspective(doc, getFamilyViews(doc).First().Id);
perspView.Name = "BCFpersp";
}
perspView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
perspView.SetOrientation(orient3d);
// turn on the far clip plane with standard parameter API
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(1);
}
// reset far clip offset
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_OFFSET_FAR).HasValue)
{
Parameter m_farClipOffset = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_OFFSET_FAR);
m_farClipOffset.SetValueString("35");
}
// turn off the far clip plane with standard parameter API
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(0);
}
perspView.CropBoxActive = true;
perspView.CropBoxVisible = true;
trans.Commit();
}
}
uidoc.ActiveView = perspView;
}
else if (v.SheetCamera != null)//sheet
{
//using (Transaction trans = new Transaction(uidoc.Document))
//{
// if (trans.Start("Open sheet view") == TransactionStatus.Started)
// {
IEnumerable <View> viewcollectorSheet = getSheets(doc, v.SheetCamera.SheetID);
if (!viewcollectorSheet.Any())
{
MessageBox.Show("No Sheet with Id=" + v.SheetCamera.SheetID + " found.");
return;
}
uidoc.ActiveView = viewcollectorSheet.First();
uidoc.ActiveView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
uidoc.RefreshActiveView();
// trans.Commit();
// }
//}
XYZ m_xyzTl = new XYZ(v.SheetCamera.TopLeft.X, v.SheetCamera.TopLeft.Y,
v.SheetCamera.TopLeft.Z);
XYZ m_xyzBr = new XYZ(v.SheetCamera.BottomRight.X, v.SheetCamera.BottomRight.Y,
v.SheetCamera.BottomRight.Z);
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else
{
return;
}
//apply BCF clipping planes to Revit section box
View3D view3D = doc.ActiveView as View3D;
if (view3D != null)
{
if (v.ClippingPlanes != null)
{
if (v.ClippingPlanes.Count() > 0)
{
var result = getBoundingBoxFromClippingPlanes(doc, v.ClippingPlanes);
if (result != null)
{
BoundingBoxXYZ computedBox = result.Item1;
Transform rotate = result.Item2;
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Apply Section Box") == TransactionStatus.Started)
{
view3D.IsSectionBoxActive = true;
view3D.SetSectionBox(computedBox);
if (rotate != null)
{
// Transform the View3D's section box with the rotation transform
computedBox.Transform = computedBox.Transform.Multiply(rotate);
// Set the section box back to the view (requires an open transaction)
view3D.SetSectionBox(computedBox);
}
}
trans.Commit();
}
}
}
}
}
//select/hide elements
if (v.Components != null && v.Components.Any())
{
if (v.Components.Count > 100)
{
var result = MessageBox.Show("Too many elements attached. It may take for a while to isolate/select them. Do you want to continue?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning);
if (result == MessageBoxResult.No)
{
uidoc.RefreshActiveView();
return;
}
}
FilteredElementCollector collector = new FilteredElementCollector(doc, doc.ActiveView.Id).WhereElementIsNotElementType();
System.Collections.Generic.ICollection <ElementId> collection = collector.ToElementIds();
foreach (var e in v.Components)
{
var bcfguid = IfcGuid.FromIfcGUID(e.IfcGuid);
int authoringToolId = string.IsNullOrWhiteSpace(e.AuthoringToolId) ? -1 : int.Parse(e.AuthoringToolId);
var ids = collection.Where(o => bcfguid == ExportUtils.GetExportId(doc, o) | authoringToolId == Convert.ToInt32(doc.GetElement(o).UniqueId.Substring(37), 16));
if (ids.Any())
{
// handle visibility
if (e.Visible)
{
elementsToBeIsolated.Add(ids.First());
}
else
{
elementsToBeHidden.Add(ids.First());
}
// handle selection
if (e.Selected)
{
elementsToBeSelected.Add(ids.First());
}
}
}
if (elementsToBeHidden.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Hide Elements") == TransactionStatus.Started)
{
uidoc.ActiveView.HideElementsTemporary(elementsToBeHidden);
}
trans.Commit();
}
}
else if (elementsToBeIsolated.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Isolate Elements") == TransactionStatus.Started)
{
uidoc.ActiveView.IsolateElementsTemporary(elementsToBeIsolated);
}
trans.Commit();
}
}
if (elementsToBeSelected.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Select Elements") == TransactionStatus.Started)
{
SelElementSet selectedElements = SelElementSet.Create();
elementsToBeSelected.ForEach(id => {
selectedElements.Add(doc.GetElement(id));
});
uidoc.Selection.Elements = selectedElements;
}
trans.Commit();
}
}
}
uidoc.RefreshActiveView();
}
catch (Exception ex)
{
TaskDialog.Show("Error!", "exception: " + ex);
}
}
/// <summary>
/// External Event Implementation
/// </summary>
/// <param name="app"></param>
public void Execute(UIApplication app)
{
try
{
UIDocument uidoc = app.ActiveUIDocument;
Document doc = uidoc.Document;
//Selection m_elementsToHide = uidoc.Selection; //SelElementSet.Create();
BlockingCollection <ElementId> elementsToBeIsolated = new BlockingCollection <ElementId>();
BlockingCollection <ElementId> elementsToBeHidden = new BlockingCollection <ElementId>();
BlockingCollection <ElementId> elementsToBeSelected = new BlockingCollection <ElementId>();
// IS ORTHOGONAL
if (v.OrthogonalCamera != null)
{
if (v.OrthogonalCamera.ViewToWorldScale == null || v.OrthogonalCamera.CameraViewPoint == null || v.OrthogonalCamera.CameraUpVector == null || v.OrthogonalCamera.CameraDirection == null)
{
return;
}
//type = "OrthogonalCamera";
var zoom = UnitUtils.ConvertToInternalUnits(v.OrthogonalCamera.ViewToWorldScale, DisplayUnitType.DUT_METERS);
var CameraDirection = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.OrthogonalCamera.CameraDirection.X, v.OrthogonalCamera.CameraDirection.Y, v.OrthogonalCamera.CameraDirection.Z);
var CameraUpVector = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.OrthogonalCamera.CameraUpVector.X, v.OrthogonalCamera.CameraUpVector.Y, v.OrthogonalCamera.CameraUpVector.Z);
var CameraViewPoint = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.OrthogonalCamera.CameraViewPoint.X, v.OrthogonalCamera.CameraViewPoint.Y, v.OrthogonalCamera.CameraViewPoint.Z);
var orient3d = ARUP.IssueTracker.Revit.Classes.Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D orthoView = null;
//if active view is 3d ortho use it
if (doc.ActiveView.ViewType == ViewType.ThreeD)
{
View3D ActiveView3D = doc.ActiveView as View3D;
if (!ActiveView3D.IsPerspective)
{
orthoView = ActiveView3D;
}
}
string userDefault3dViewName = "{3D - " + app.Application.Username + "}";
string default3dViewName = "{3D}";
string userBCForthoViewName = string.Format("BCFortho_{0}", app.Application.Username);
if (orthoView == null)
{
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
//find a orthographic 3D view
if (viewcollector3D.Any())
{
if (viewcollector3D.Where(o => o.Name == userDefault3dViewName).Any()) // 1) try to find user specific 3D view in workshared environment
{
orthoView = viewcollector3D.Where(o => o.Name == userDefault3dViewName).First();
}
else if (viewcollector3D.Where(o => o.Name == default3dViewName).Any()) // 2) try to find the default 3D view if 1) not found
{
orthoView = viewcollector3D.Where(o => o.Name == default3dViewName).First();
}
else if (viewcollector3D.Where(o => o.Name == userBCForthoViewName).Any()) // 3) try to find BCFortho 3D view generated by AIT previously if 2) is not found
{
orthoView = viewcollector3D.Where(o => o.Name == userBCForthoViewName).First();
}
}
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open orthogonal view") == TransactionStatus.Started)
{
//create a new user-specific 3d ortho view
if (orthoView == null)
{
orthoView = View3D.CreateIsometric(doc, getFamilyViews(doc).First().Id);
orthoView.Name = userBCForthoViewName;
}
orthoView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
orthoView.SetOrientation(orient3d);
trans.Commit();
}
}
uidoc.ActiveView = orthoView;
//adjust view rectangle
// **** CUSTOM VALUE FOR TEKLA **** //
// double x = touple.Item2
// **** CUSTOM VALUE FOR TEKLA **** //
double customZoomValue = (MyProjectSettings.Get("useDefaultZoom", doc.PathName) == "1") ? 1 : 2.5;
double x = zoom / customZoomValue;
XYZ m_xyzTl = uidoc.ActiveView.Origin.Add(uidoc.ActiveView.UpDirection.Multiply(x)).Subtract(uidoc.ActiveView.RightDirection.Multiply(x));
XYZ m_xyzBr = uidoc.ActiveView.Origin.Subtract(uidoc.ActiveView.UpDirection.Multiply(x)).Add(uidoc.ActiveView.RightDirection.Multiply(x));
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else if (v.PerspectiveCamera != null)
{
if (v.PerspectiveCamera.FieldOfView == null || v.PerspectiveCamera.CameraViewPoint == null || v.PerspectiveCamera.CameraUpVector == null || v.PerspectiveCamera.CameraDirection == null)
{
return;
}
var zoom = v.PerspectiveCamera.FieldOfView;
double z1 = 18 / Math.Tan(zoom / 2 * Math.PI / 180); //focale 1
double z = 18 / Math.Tan(25 / 2 * Math.PI / 180); //focale, da controllare il 18, vedi PDF
double factor = z1 - z;
var CameraDirection = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.PerspectiveCamera.CameraDirection.X, v.PerspectiveCamera.CameraDirection.Y, v.PerspectiveCamera.CameraDirection.Z);
var CameraUpVector = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.PerspectiveCamera.CameraUpVector.X, v.PerspectiveCamera.CameraUpVector.Y, v.PerspectiveCamera.CameraUpVector.Z);
XYZ oldO = ARUP.IssueTracker.Revit.Classes.Utils.GetInternalXYZ(v.PerspectiveCamera.CameraViewPoint.X, v.PerspectiveCamera.CameraViewPoint.Y, v.PerspectiveCamera.CameraViewPoint.Z);
var CameraViewPoint = (oldO.Subtract(CameraDirection.Divide(factor)));
var orient3d = ARUP.IssueTracker.Revit.Classes.Utils.ConvertBasePoint(doc, CameraViewPoint, CameraDirection, CameraUpVector, true);
View3D perspView = null;
IEnumerable <View3D> viewcollector3D = get3DViews(doc);
string userPersp3dViewName = string.Format("BCFperps_{0}", app.Application.Username);
// find a perspective view
if (viewcollector3D.Any() && viewcollector3D.Where(o => o.Name == userPersp3dViewName).Any())
{
perspView = viewcollector3D.Where(o => o.Name == userPersp3dViewName).First();
}
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Open perspective view") == TransactionStatus.Started)
{
if (null == perspView)
{
perspView = View3D.CreatePerspective(doc, getFamilyViews(doc).First().Id);
perspView.Name = userPersp3dViewName;
}
perspView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
perspView.SetOrientation(orient3d);
// turn on the far clip plane with standard parameter API
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(1);
}
// reset far clip offset
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_OFFSET_FAR).HasValue)
{
Parameter m_farClipOffset = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_OFFSET_FAR);
m_farClipOffset.SetValueString("35");
}
// turn off the far clip plane with standard parameter API
if (perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR).HasValue)
{
Parameter m_farClip = perspView.get_Parameter(BuiltInParameter.VIEWER_BOUND_ACTIVE_FAR);
m_farClip.Set(0);
}
perspView.CropBoxActive = true;
perspView.CropBoxVisible = true;
trans.Commit();
}
}
uidoc.ActiveView = perspView;
}
else if (v.SheetCamera != null)//sheet
{
//using (Transaction trans = new Transaction(uidoc.Document))
//{
// if (trans.Start("Open sheet view") == TransactionStatus.Started)
// {
IEnumerable <View> viewcollectorSheet = getSheets(doc, v.SheetCamera.SheetID);
if (!viewcollectorSheet.Any())
{
MessageBox.Show("No Sheet with Id=" + v.SheetCamera.SheetID + " found.");
return;
}
uidoc.ActiveView = viewcollectorSheet.First();
uidoc.ActiveView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
uidoc.RefreshActiveView();
// trans.Commit();
// }
//}
XYZ m_xyzTl = new XYZ(v.SheetCamera.TopLeft.X, v.SheetCamera.TopLeft.Y,
v.SheetCamera.TopLeft.Z);
XYZ m_xyzBr = new XYZ(v.SheetCamera.BottomRight.X, v.SheetCamera.BottomRight.Y,
v.SheetCamera.BottomRight.Z);
uidoc.GetOpenUIViews().First().ZoomAndCenterRectangle(m_xyzTl, m_xyzBr);
}
else
{
return;
}
//apply BCF clipping planes to Revit section box
View3D view3D = doc.ActiveView as View3D;
if (view3D != null)
{
// resume section box state
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Resume Section Box") == TransactionStatus.Started)
{
view3D.IsSectionBoxActive = false;
}
trans.Commit();
}
if (v.ClippingPlanes != null)
{
if (v.ClippingPlanes.Count() > 0)
{
var result = getBoundingBoxFromClippingPlanes(doc, v.ClippingPlanes);
if (result != null)
{
BoundingBoxXYZ computedBox = result.Item1;
Transform rotate = result.Item2;
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Apply Section Box") == TransactionStatus.Started)
{
view3D.IsSectionBoxActive = true;
view3D.SetSectionBox(computedBox);
if (rotate != null)
{
// Transform the View3D's section box with the rotation transform
computedBox.Transform = computedBox.Transform.Multiply(rotate);
// Set the section box back to the view (requires an open transaction)
view3D.SetSectionBox(computedBox);
}
}
trans.Commit();
}
}
}
}
}
// resume visibility and selection
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Resume Visibility/Selection") == TransactionStatus.Started)
{
#if REVIT2014
uidoc.ActiveView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
uidoc.Selection.Elements.Clear();
#elif REVIT2015
uidoc.ActiveView.DisableTemporaryViewMode(TemporaryViewMode.TemporaryHideIsolate);
uidoc.Selection.SetElementIds(new List <ElementId>());
#else
uidoc.ActiveView.TemporaryViewModes.DeactivateAllModes();
uidoc.Selection.SetElementIds(new List <ElementId>());
#endif
}
trans.Commit();
}
//select/hide elements
if (v.Components != null && v.Components.Any())
{
//if (v.Components.Count > 100)
//{
// var result = MessageBox.Show("Too many elements attached. It may take for a while to isolate/select them. Do you want to continue?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning);
// if (result == MessageBoxResult.No)
// {
// uidoc.RefreshActiveView();
// return;
// }
//}
revitWindow.initializeProgressWin(v.Components.Count);
FilteredElementCollector collector = new FilteredElementCollector(doc, doc.ActiveView.Id);
var allElementIds = collector.ToElementIds();
Dictionary <Guid, ElementId> exportIdElementIdDic = new Dictionary <Guid, ElementId>();
Dictionary <int, ElementId> uniqueIdElementIdDic = new Dictionary <int, ElementId>();
foreach (ElementId eId in allElementIds)
{
Guid guid = ExportUtils.GetExportId(doc, eId);
int elementIdInteger = Convert.ToInt32(doc.GetElement(eId).UniqueId.Substring(37), 16);
if (!exportIdElementIdDic.ContainsKey(guid))
{
exportIdElementIdDic.Add(guid, eId);
}
if (!uniqueIdElementIdDic.ContainsKey(elementIdInteger))
{
uniqueIdElementIdDic.Add(elementIdInteger, eId);
}
}
//System.Threading.Tasks.Parallel.For(0, v.Components.Count, i => {
for (int i = 0; i < v.Components.Count; i++)
{
double percentage = ((double)i / (double)v.Components.Count) * 100;
revitWindow.updateProgressWin((int)percentage, i, v.Components.Count);
ARUP.IssueTracker.Classes.BCF2.Component e = v.Components[i];
ElementId currentElementId = null;
// find by ElementId first if OriginatingSystem is Revit
if (e.OriginatingSystem != null)
{
if (e.OriginatingSystem.Contains("Revit") && !string.IsNullOrEmpty(e.AuthoringToolId))
{
int elementId = -1;
int.TryParse(e.AuthoringToolId, out elementId);
if (elementId != -1)
{
Element ele = doc.GetElement(new ElementId(elementId));
if (ele != null)
{
currentElementId = ele.Id;
}
}
}
}
// find by IfcGuid if ElementId not found
if (currentElementId == null)
{
var bcfguid = IfcGuid.FromIfcGUID(e.IfcGuid);
if (exportIdElementIdDic.ContainsKey(bcfguid))
{
currentElementId = exportIdElementIdDic[bcfguid];
}
}
// find by UniqueId if IfcGuid not found
if (currentElementId == null)
{
int authoringToolId = -1;
int.TryParse(e.AuthoringToolId, out authoringToolId);
if (uniqueIdElementIdDic.ContainsKey(authoringToolId))
{
currentElementId = uniqueIdElementIdDic[authoringToolId];
}
}
if (currentElementId != null)
{
// handle visibility
if (e.Visible)
{
elementsToBeIsolated.Add(currentElementId);
}
else
{
elementsToBeHidden.Add(currentElementId);
}
// handle selection
if (e.Selected)
{
elementsToBeSelected.Add(currentElementId);
}
}
}
;
if (elementsToBeHidden.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Hide Elements") == TransactionStatus.Started)
{
uidoc.ActiveView.HideElementsTemporary(elementsToBeHidden.ToList());
}
trans.Commit();
}
}
else if (elementsToBeIsolated.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Isolate Elements") == TransactionStatus.Started)
{
uidoc.ActiveView.IsolateElementsTemporary(elementsToBeIsolated.ToList());
}
trans.Commit();
}
}
if (elementsToBeSelected.Count > 0)
{
using (Transaction trans = new Transaction(uidoc.Document))
{
if (trans.Start("Select Elements") == TransactionStatus.Started)
{
#if REVIT2014
SelElementSet selectedElements = SelElementSet.Create();
elementsToBeSelected.ToList().ForEach(id =>
{
selectedElements.Add(doc.GetElement(id));
});
uidoc.Selection.Elements = selectedElements;
#else
uidoc.Selection.SetElementIds(elementsToBeSelected.ToList());
#endif
}
trans.Commit();
}
}
revitWindow.disposeProgressWin();
}
uidoc.RefreshActiveView();
}
catch (Exception ex)
{
TaskDialog.Show("Error!", "exception: " + ex);
}
}