static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// enable first channel FDwfAnalogInChannelEnableSet(hdwf, 0, true)
// set 0V offset
Dwf.AnalogInChannelOffsetSet(hdwf, 0, 0);
// set 5V pk2pk input range, -2.5V to 2.5V
Dwf.AnalogInChannelRangeSet(hdwf, 0, 5);
// start signal generation
Dwf.AnalogInConfigure(hdwf, false, false);
// wait at least 2 seconds with Analog Discovery for the offset to stabilize, before the first reading after device open or offset/range change
Wait(2);
for (int i = 0; i < 10; i++)
{
Wait(1);
// fetch analog input information from the device
var state = Dwf.AnalogInStatus(hdwf, false);
// read voltage input of first channel
var voltage = Dwf.AnalogInStatusSample(hdwf, 0);
cout.WriteLine(voltage.ToString() + " V", voltage);
}
// close all opened devices by this process
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// detect connected all supported devices
var cDevice = Dwf.Enumerate(ENUMFILTER.All);
// list information about each device
cout.WriteLine("found " + cDevice.ToString() + " devices");
for (int i = 0; i < cDevice; i++)
{
// we use 0 based indexing
var szDeviceName = Dwf.EnumDeviceName(i);
var szSN = Dwf.EnumSN(i);
cout.WriteLine("device: " + (i + 1).ToString() + " name: " + szDeviceName + " " + szSN);
// before opening, check if the device isn’t already opened by other application, like: WaveForms
var fIsInUse = Dwf.EnumDeviceIsOpened(i);
if (!fIsInUse)
{
var hdwf = Dwf.DeviceOpen(i);
var cChannel = Dwf.AnalogInChannelCount(hdwf);
var frequencyRange = Dwf.AnalogInFrequencyInfo(hdwf);
cout.WriteLine("number of analog input channels: " + cChannel.ToString() + " maximum freq.: " + frequencyRange.Max.ToString() + " Hz");
Dwf.DeviceClose(hdwf);
hdwf = -1;
}
}
// before application exit make sure to close all opened devices by this process
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// enable first channel
Dwf.AnalogOutNodeEnableSet(hdwf, 0, ANALOGOUTNODE.Carrier, true);
// set sine function
Dwf.AnalogOutNodeFunctionSet(hdwf, 0, ANALOGOUTNODE.Carrier, FUNC.Sine);
// 10kHz
Dwf.AnalogOutNodeFrequencySet(hdwf, 0, ANALOGOUTNODE.Carrier, 10000.0);
// 1.41V amplitude (1Vrms), 2.82V pk2pk
Dwf.AnalogOutNodeAmplitudeSet(hdwf, 0, ANALOGOUTNODE.Carrier, 1.41);
// 1.41V offset
Dwf.AnalogOutNodeOffsetSet(hdwf, 0, ANALOGOUTNODE.Carrier, 1.41);
// start signal generation
Dwf.AnalogOutConfigure(hdwf, 0, true);
// it will run until stopped, reset, parameter changed or device closed
Wait(2);
// on close device is stopped and configuration lost
Dwf.DeviceClose(hdwf);
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
var hzSys = Dwf.DigitalOutInternalClockInfo(hdwf);
for (int i = 0; i < 16; i++)
{
Dwf.DigitalOutEnableSet(hdwf, i, true);
// increase by 2 the period of successive bits
Dwf.DigitalOutDividerSet(hdwf, i, 1u << i);
// 100kHz coutner rate, SystemFrequency/100kHz
Dwf.DigitalOutCounterSet(hdwf, i, (uint)(hzSys / 1e5), (uint)(hzSys / 1e5));
}
Dwf.DigitalOutConfigure(hdwf, true);
// it will run until stopped, reset, parameter changed or device closed
Wait(5);
Dwf.DigitalOutReset(hdwf);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
cout.WriteLine("Open automatically the first available device");
var hdwf = Dwf.DeviceOpen(-1);
var hzSys = Dwf.DigitalInInternalClockInfo(hdwf);
// sample rate to 1MHz
Dwf.DigitalInDividerSet(hdwf, (uint)(hzSys / 1e6));
// 16bit WORD format
Dwf.DigitalInSampleFormatSet(hdwf, 16);
// get the maximum buffer size
var cSamples = Dwf.DigitalInBufferSizeInfo(hdwf);
// default buffer size is set to maximum
//Dwf.DigitalInBufferSizeSet(hdwf, cSamples);
// set trigger position to the middle
Dwf.DigitalInTriggerPositionSet(hdwf, (uint)(cSamples / 2));
// trigger on any pin transition
Dwf.DigitalInTriggerSourceSet(hdwf, TRIGSRC.DetectorDigitalIn);
Dwf.DigitalInTriggerAutoTimeoutSet(hdwf, 10.0);
Dwf.DigitalInTriggerSet(hdwf, 0, 0, 0xFFFF, 0xFFFF);
// start
Dwf.DigitalInConfigure(hdwf, false, true);
cout.WriteLine("Waiting for triggered or auto acquisition");
STATE sts;
do
{
sts = Dwf.DigitalInStatus(hdwf, true);
} while (sts != STATE.Done);
// get the samples
var rgwSamples = Dwf.DigitalInStatusData(hdwf, cSamples);
cout.WriteLine("done");
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
//
var hzSys = Dwf.DigitalOutInternalClockInfo(hdwf);
// 1kHz pulse on IO pin 0
Dwf.DigitalOutEnableSet(hdwf, 0, true);
// prescaler to 2kHz, SystemFrequency/1kHz/2
Dwf.DigitalOutDividerSet(hdwf, 0, (uint)(hzSys / 1e3 / 2));
// 1 tick low, 1 tick high
Dwf.DigitalOutCounterSet(hdwf, 0, 1, 1);
// 1kHz 25% duty pulse on IO pin 1
Dwf.DigitalOutEnableSet(hdwf, 1, true);
// prescaler to 4kHz SystemFrequency/1kHz/2
Dwf.DigitalOutDividerSet(hdwf, 1, (uint)(hzSys / 1e3 / 4));
// 3 ticks low, 1 tick high
Dwf.DigitalOutCounterSet(hdwf, 1, 3, 1);
// 2kHz random on IO pin 2
Dwf.DigitalOutEnableSet(hdwf, 2, true);
Dwf.DigitalOutTypeSet(hdwf, 2, DIGITALOUTTYPE.Random);
Dwf.DigitalOutDividerSet(hdwf, 2, (uint)(hzSys / 2e3));
var rgcustom = new byte[] { 0x00, 0xAA, 0x66, 0xFF };
// 1kHz custom on IO pin 3
Dwf.DigitalOutEnableSet(hdwf, 3, true);
Dwf.DigitalOutTypeSet(hdwf, 3, DIGITALOUTTYPE.Custom);
Dwf.DigitalOutDividerSet(hdwf, 3, (uint)(hzSys / 2e3));
Dwf.DigitalOutDataSet(hdwf, 3, rgcustom, 4 * 8);
Dwf.DigitalOutConfigure(hdwf, true);
// it will run until stopped, reset, parameter changed or device closed
Wait(5);
Dwf.DigitalOutReset(hdwf);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
var rgdSamples = new double[1024];
int idxChannel = 0;
// generate custom samples normalized to +-1
for (int i = 0; i < 1024; i++)
{
rgdSamples[i] = 2.0 * i / 1023 - 1;
}
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// needed for EExplorer, don't care for ADiscovery
Dwf.AnalogOutCustomAMFMEnableSet(hdwf, idxChannel, true);
// enable first channel
Dwf.AnalogOutNodeEnableSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, true);
// set sine carrier
Dwf.AnalogOutNodeFunctionSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, FUNC.Sine);
// 1V amplitude, 2V pk2pk
Dwf.AnalogOutNodeAmplitudeSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, 1.0);
// 10kHz carrier frequency
Dwf.AnalogOutNodeFrequencySet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, 1000.0);
// enable amplitude modulation
Dwf.AnalogOutNodeEnableSet(hdwf, idxChannel, ANALOGOUTNODE.AM, true);
// set custom AM
Dwf.AnalogOutNodeFunctionSet(hdwf, idxChannel, ANALOGOUTNODE.AM, FUNC.Custom);
// +-100% modulation index, will result with 1V amplitude carrier, 0V to 2V
Dwf.AnalogOutNodeAmplitudeSet(hdwf, idxChannel, ANALOGOUTNODE.AM, 100);
// 10Hz AM frequency
Dwf.AnalogOutNodeFrequencySet(hdwf, idxChannel, ANALOGOUTNODE.AM, 10.0);
// set custom waveform samples
// normalized to ±1 values
Dwf.AnalogOutNodeDataSet(hdwf, idxChannel, ANALOGOUTNODE.AM, rgdSamples);
// by default the offset is 0V
// start signal generation
Dwf.AnalogOutConfigure(hdwf, idxChannel, true);
// it will run until stopped or device closed
Wait(5);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
int idxChannel = 0;
double hzStart = 1e3;
double hzStop = 1e5;
double secSweep = 1;
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// enable first channel
Dwf.AnalogOutNodeEnableSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, true);
// set sine carrier
Dwf.AnalogOutNodeFunctionSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, FUNC.Sine);
// 1V amplitude, 2V pk2pk
Dwf.AnalogOutNodeAmplitudeSet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, 1.0);
// 10kHz carrier frequency
Dwf.AnalogOutNodeFrequencySet(hdwf, idxChannel, ANALOGOUTNODE.Carrier, (hzStart + hzStop) / 2);
// enable frequency modulation
Dwf.AnalogOutNodeEnableSet(hdwf, idxChannel, ANALOGOUTNODE.FM, true);
// linear sweep with ramp up symmetry 100%
Dwf.AnalogOutNodeFunctionSet(hdwf, idxChannel, ANALOGOUTNODE.FM, FUNC.RampUp);
Dwf.AnalogOutNodeSymmetrySet(hdwf, idxChannel, ANALOGOUTNODE.FM, 100);
// modulation index
Dwf.AnalogOutNodeAmplitudeSet(hdwf, idxChannel, ANALOGOUTNODE.FM, 100.0 * (hzStop - hzStart) / (hzStart + hzStop));
// FM frequency = 1/sweep time
Dwf.AnalogOutNodeFrequencySet(hdwf, idxChannel, ANALOGOUTNODE.FM, 1.0 / secSweep);
// by default the offset is 0V
// start signal generation
Dwf.AnalogOutConfigure(hdwf, idxChannel, true);
// it will run until stopped or device closed
Wait(5);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
var rgdSamples = new double[4096];
// generate custom samples normalized to +-1
for (int i = 0; i < 4096; i++)
{
rgdSamples[i] = 2.0 * i / 4095 - 1;
}
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// enable first channel
Dwf.AnalogOutNodeEnableSet(hdwf, 0, ANALOGOUTNODE.Carrier, true);
// set custom function
Dwf.AnalogOutNodeFunctionSet(hdwf, 0, ANALOGOUTNODE.Carrier, FUNC.Custom);
// set custom waveform samples
// normalized to ±1 values
Dwf.AnalogOutNodeDataSet(hdwf, 0, ANALOGOUTNODE.Carrier, rgdSamples);
// 10kHz waveform frequency
Dwf.AnalogOutNodeFrequencySet(hdwf, 0, ANALOGOUTNODE.Carrier, 10000.0);
// 2V amplitude, 4V pk2pk, for sample value -1 will output -2V, for 1 +2V
Dwf.AnalogOutNodeAmplitudeSet(hdwf, 0, ANALOGOUTNODE.Carrier, 2);
// by default the offset is 0V
// start signal generation
Dwf.AnalogOutConfigure(hdwf, 0, true);
// it will run until stopped or device closed
Wait(5);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
// enable two channels
Dwf.AnalogOutNodeEnableSet(hdwf, 0, ANALOGOUTNODE.Carrier, true);
Dwf.AnalogOutNodeEnableSet(hdwf, 1, ANALOGOUTNODE.Carrier, true);
// for second channel set master the first channel
Dwf.AnalogOutMasterSet(hdwf, 1, 0);
// slave channel is controlled by the master channel
// it is enough to set trigger, wait, run and repeat parameters for master channel
// when using different frequencies it might need periodical resynchronization
// to do so set limited runtime and repeat infinite
// configure enabled channels
Dwf.AnalogOutNodeFunctionSet(hdwf, -1, ANALOGOUTNODE.Carrier, FUNC.Sine);
Dwf.AnalogOutNodeFrequencySet(hdwf, -1, ANALOGOUTNODE.Carrier, 10000.0);
Dwf.AnalogOutNodeAmplitudeSet(hdwf, -1, ANALOGOUTNODE.Carrier, 1.0);
// set phase for second channel
Dwf.AnalogOutNodePhaseSet(hdwf, 1, ANALOGOUTNODE.Carrier, 180.0);
// slave channel will only be initialized
Dwf.AnalogOutConfigure(hdwf, 1, true);
// starting master will start slave channels too
Dwf.AnalogOutConfigure(hdwf, 0, true);
// it will run until stopped, reset, parameter changed or device closed
Wait(10);
// on close device is stopped and configuration lost
Dwf.DeviceClose(hdwf);
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
// open automatically the first available device
var hdwf = Dwf.DeviceOpen(-1);
var hzSys = Dwf.DigitalOutInternalClockInfo(hdwf);
// 10 bit walking 1
for (int i = 0; i < 10; i++)
{
Dwf.DigitalOutEnableSet(hdwf, i, true);
// divide system frequency down to 1khz
Dwf.DigitalOutDividerSet(hdwf, i, (uint)(hzSys / 1e3));
// all pins will be 9 ticks low and 1 high
Dwf.DigitalOutCounterSet(hdwf, i, 9, 1);
// first bit will start high others low with increasing phase
Dwf.DigitalOutCounterInitSet(hdwf, i, i == 0, (uint)i);
}
// start digital out
Dwf.DigitalOutConfigure(hdwf, true);
// it will run until stopped, reset, parameter changed or device closed
Wait(5);
Dwf.DigitalOutReset(hdwf);
// on close device is stopped and configuration lost
Dwf.DeviceCloseAll();
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
cout.WriteLine("Open automatically the first available device");
var hdwf = Dwf.DeviceOpen(-1);
// get the number of analog in channels
var cChannel = Dwf.AnalogInChannelCount(hdwf);
// enable channels
for (int c = 0; c < cChannel; c++)
{
Dwf.AnalogInChannelEnableSet(hdwf, c, true);
}
// set 5V pk2pk input range for all channels
Dwf.AnalogInChannelRangeSet(hdwf, -1, 5);
// 20MHz sample rate
Dwf.AnalogInFrequencySet(hdwf, 20000000.0);
// get the maximum buffer size
var cSamples = Dwf.AnalogInBufferSizeInfo(hdwf).Max;
Dwf.AnalogInBufferSizeSet(hdwf, cSamples);
// configure trigger
Dwf.AnalogInTriggerSourceSet(hdwf, TRIGSRC.DetectorAnalogIn);
Dwf.AnalogInTriggerAutoTimeoutSet(hdwf, 10.0);
Dwf.AnalogInTriggerChannelSet(hdwf, 0);
Dwf.AnalogInTriggerTypeSet(hdwf, TRIGTYPE.Edge);
Dwf.AnalogInTriggerLevelSet(hdwf, 1.0);
Dwf.AnalogInTriggerConditionSet(hdwf, TRIGCOND.RisingPositive);
// wait at least 2 seconds with Analog Discovery for the offset to stabilize, before the first reading after device open or offset/range change
Wait(2);
// start
Dwf.AnalogInConfigure(hdwf, false, true);
cout.WriteLine("Waiting for triggered or auto acquisition");
STATE sts;
do
{
sts = Dwf.AnalogInStatus(hdwf, true);
} while (sts != STATE.Done);
double[] rgdSamples = null;
// get the samples for each channel
for (int c = 0; c < cChannel; c++)
{
rgdSamples = Dwf.AnalogInStatusData(hdwf, c, cSamples);
// do something with it
}
cout.WriteLine("done");
// close the device
Dwf.DeviceClose(hdwf);
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}
static void Main(string[] args)
{
try
{
const int nSamples = 100000;
double[] rgdSamples = new double[nSamples];
int cSamples = 0;
bool fLost = false;
bool fCorrupted = false;
cout.WriteLine("Open automatically the first available device\n");
var hdwf = Dwf.DeviceOpen(-1);
Dwf.AnalogInChannelEnableSet(hdwf, 0, true);
Dwf.AnalogInChannelRangeSet(hdwf, 0, 5);
// recording rate for more samples than the device buffer is limited by device communication
Dwf.AnalogInAcquisitionModeSet(hdwf, ACQMODE.Record);
Dwf.AnalogInFrequencySet(hdwf, 50000.0);
// make sure we calculate record length with the real frequency
var hzAcq = Dwf.AnalogInFrequencyGet(hdwf);
Dwf.AnalogInRecordLengthSet(hdwf, 1.0 * nSamples / hzAcq);
// wait at least 2 seconds with Analog Discovery for the offset to stabilize, before the first reading after device open or offset/range change
Wait(2);
// start
Dwf.AnalogInConfigure(hdwf, false, true);
cout.WriteLine("Recording...");
while (cSamples < nSamples)
{
var sts = Dwf.AnalogInStatus(hdwf, true);
if (cSamples == 0 && (sts == STATE.Config || sts == STATE.Prefill || sts == STATE.Armed))
{
// Acquisition not yet started.
continue;
}
var stats = Dwf.AnalogInStatusRecord(hdwf);
cSamples += stats.Lost;
if (stats.Lost > 0)
{
fLost = true;
}
if (stats.Corrupt > 0)
{
fCorrupted = false;
}
if (stats.Available > 0)
{
var remaining = nSamples - cSamples;
var todo = Math.Min(remaining, stats.Available);
// get samples
Dwf.AnalogInStatusData(hdwf, 0, rgdSamples, cSamples, todo);
cSamples += stats.Available;
}
}
cout.WriteLine("done");
if (fLost)
{
cout.WriteLine("Samples were lost! Reduce frequency");
}
else if (fCorrupted)
{
cout.WriteLine("Samples could be corrupted! Reduce frequency");
}
// close the device
Dwf.DeviceClose(hdwf);
}
catch (Exception ex)
{
cout.WriteLine("Error: " + ex.Message);
}
}