private void showOneFX(PropertyGridEx pg, CFXProj fx, int fxID)
{
pg.SelectedObject = fx;
chart1.Series[fxID].Points.Clear();
for (int j = 0; j < fx.strDate.Count; j++)
{
chart1.Series[fxID].Points.AddXY(DateTime.ParseExact(fx.strDate[j], "yyyyMMdd", System.Globalization.CultureInfo.CurrentCulture),
Math.Round(fx.doneAmount[j] / fx.TotalAmount * 100, 1));
}
}
/// <summary>
/// 绘制分项工程进度
/// </summary>
/// <param name="myGraphics"></param>
/// <param name="tunnel"></param>
/// <param name="winHeight"> 隧道绘制宽度（像素），一般60</param>
/// <param name="winWidth">窗口panel的宽度（像素），包围盒，用于判断是否该图形越界</param>
/// <param name="pm">变换矩阵</param>
/// <param name="scaleX">x方向上 里程长度 * scaleX = 像素长度</param>
/// <param name="unitM">单位里程（米）</param>
private bool draw_PrjFX(Graphics myGraphics, CRailwayProject prj, string prjType, float winHeight, float winWidth, Matrix pm, float scaleX, bool fxOnly = true, float unitM = 8)
{
bool needDrawDetails = false;
float prjLength = (float)prj.Length;
float prjPixelLength = prjLength * scaleX;
float done;
bool isReverse = prj.mMileage_End < prj.mMileage_Start;
float sx, ex;
if (isReverse)
{
sx = (float)prj.mMainMileageE;
ex = (float)prj.mMainMileageS;
}
else
{
sx = (float)prj.mMainMileageS;
ex = (float)prj.mMainMileageE;
}
PointF[] sd = { new PointF(0, 100), new PointF(0, 100) }; // 窗口
sd[0].X = (float)sx;
sd[1].X = (float)ex;
pm.TransformPoints(sd);
if (sd[1].X <0 || sd[0].X> winWidth) // 如果桥梁不在绘制区域，返回false，也不需要绘制细节
{
return(needDrawDetails);
}
float unitPixelLength = unitM * scaleX;
float startPixelX = sd[0].X;
float endPixelX = sd[1].X;
float actualPixelS = Math.Max(startPixelX, 0);
float actualPixelE = Math.Min(endPixelX, winWidth); // 屏幕内的起始终止位置
float unitHeight = (winHeight / 3);
Pen p = defaultPen;
RectangleF areaf;
float sy = prjStartY + 25;
// 1、绘制左右边界，上方线，以及工程名
areaf = new RectangleF(actualPixelS, prjStartY, actualPixelE - actualPixelS, 20);
if (prj.mAvgProgress > 0)
{
myGraphics.DrawLine(p, endPixelX, prjStartY, endPixelX, prjEndY);
myGraphics.DrawLine(p, startPixelX, 47, endPixelX, 47);
myGraphics.DrawLine(p, startPixelX, prjStartY, startPixelX, prjEndY);
if (areaf.Width > 200)
{
if (isReverse)
{
myGraphics.DrawString("<<< " + prj.ProjectName, defaultFont, Brushes.Black, areaf, centerFormat);
}
else
{
myGraphics.DrawString(prj.ProjectName + ">>>", defaultFont, Brushes.Black, areaf, centerFormat);
}
}
else if (areaf.Width > 20)
{
myGraphics.DrawString(prjType, defaultFont, Brushes.Black, areaf, centerFormat);
}
}
// 如果8米对应3个像素以内，逐条绘制分项工程
if (fxOnly || unitPixelLength < 4)
{
if (!(prj.FXProgress == null || prj.FXProgress.Count == 0))
{
for (int i = 0; i < 3; i++) //road.FXProgress.Count, FIXME 选3项绘制
{
int sIndex = prj.selectedFXid[i];
if (sIndex < 0)
{
continue;
}
CFXProj proj = prj.FXProgress[sIndex];
int lastIndex = proj.doneAmount.Count - 1;
done = (float)(proj.doneAmount[lastIndex] / proj.TotalAmount);
//areaf = new RectangleF(sx, sy, tunnelLength, unitHeight);
myGraphics.DrawRectangle(Pens.Black, startPixelX, sy, prjPixelLength, unitHeight);
if (isReverse)
{
myGraphics.FillRectangle(notDoneB, startPixelX, sy + 1, prjPixelLength * (1 - done), unitHeight - 2);
myGraphics.FillRectangle(backBrush[i], startPixelX + prjPixelLength * (1 - done) + 1, sy + 1, prjPixelLength * done, unitHeight - 2);
}
else
{
myGraphics.FillRectangle(backBrush[i], startPixelX, sy + 1, prjPixelLength * done, unitHeight - 2);
myGraphics.FillRectangle(notDoneB, startPixelX + prjPixelLength * done + 1, sy + 1, prjPixelLength * (1 - done), unitHeight - 2);
}
areaf = new RectangleF(actualPixelS, sy, actualPixelE - actualPixelS, unitHeight);
if (areaf.Width > 100)
{
myGraphics.DrawString(Math.Round(done, 3) * 100 + "%", defaultFont, Brushes.Black, areaf, centerFormat);
}
sy += unitHeight;
}
}
return(false);
}
needDrawDetails = true;
return(needDrawDetails);
}
