/// <summary>
/// Creer un percage ou ajouter
/// </summary>
/// <param name="comp"></param>
private void AjouterPercage(Component2 comp = null)
{
Component2 Comp = comp;
if (comp.IsNull())
{
Comp = _AssBase.AddComponent5(CompPercage.GetPathName(),
(int)swAddComponentConfigOptions_e.swAddComponentConfigOptions_CurrentSelectedConfig,
"",
true,
CompPercage.eNomConfiguration(),
0, 0, 0);
}
_MdlBase.eSelectByIdComp(Comp.GetSelectByIDString());
_AssBase.eModifierEtatComposant(swComponentSuppressionState_e.swComponentResolved);
_MdlBase.eEffacerSelection();
_ListePercage.Add(Comp.Name2, Comp.GetSelectByIDString());
}
/// <summary>
/// 当结果返回True 时 表示两个零件不一样，结果false时表示 两个零件一样
/// </summary>
/// <param name="sendTocustomer"></param>
/// <param name="localModel"></param>
/// <returns></returns>
public bool CheckTwoParts(string sendTocustomer, string localModel)
{
bool different1 = false;
bool different2 = false;
swApp = ConnectToSolidWorks();
// swApp = ConnectToSolidWorks();
//加载参考关系零件
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, (int)swLoadExternalReferences_e.swLoadExternalReferences_ChangedOnly);
//后台模式 前台不显示界面
swApp.EnableBackgroundProcessing = true;
//禁止记录文件路径
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, true);
swApp.OpenDoc(localModel, 1);
swApp.OpenDoc(sendTocustomer, 1);
ModelDoc2 swModel = (ModelDoc2)swApp.ActiveDoc;
string LocalPath = System.IO.Directory.GetParent(swModel.GetPathName()).ToString();
string tempAssembly = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplateAssembly);
AssemblyDoc assemblyDoc = (AssemblyDoc)swApp.NewDocument(tempAssembly, 0, 0, 0);
Component2 insertComponentSendtoCustomer = assemblyDoc.AddComponent5(sendTocustomer, 0, "", false, "", 0, 0, 0);
Component2 insertComponentLocal = assemblyDoc.AddComponent5(localModel, 0, "", false, "", 0, 0, 0);
string sendSelect = insertComponentSendtoCustomer.GetSelectByIDString();
string localSelect = insertComponentLocal.GetSelectByIDString();
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b1 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + sendSelect, "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
bool b2 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + localSelect, "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
int longstatus;
Mate2 mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0.001, 0.001, 0.001, 0.001, 0, 0, 0, false, false, 0, out longstatus);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.SaveAs(LocalPath + @"\TopCheck.sldasm");
//不显示特征树
//swModel.Extension.HideFeatureManager(true);
swModel.ClearSelection2(true);
//swModel.FeatureManager.ViewFeatures = false;
//FeatureManager featureManager = swModel.FeatureManager;
//禁用特征树
//featureManager.EnableFeatureTree = false;
// swModel.FeatureManager.EnableFeatureTreeWindow = false;
#region first join
Component2 sendToCustomerBodies = default(Component2);
List <Component2> sendToCustomerBodiesList = new List <Component2>();
object swFaceOrPlane = default(object);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out sendToCustomerBodies);
sendToCustomerBodies.Select(true);
assemblyDoc.FixComponent();
sendToCustomerBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
object[] splits = sendToCustomerBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "localBodies-1";
ModelDoc2 compModel = default(ModelDoc2);
compModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
bool ret;
ret = sendToCustomerBodies.SaveVirtualComponent(compName);
sendToCustomerBodiesList.Add(sendToCustomerBodies);
insertComponentSendtoCustomer.Select(false);
swModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesCustomer = new List <string>();
PartDoc swPart = null;
object vBody;
swPart = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr = null;
Body2 swBody = default(Body2);
MathTransform swMathTrans = null;
vBodyArr = (object[])swPart.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr)
{
vBody = vBody_loopVariable;
swBody = (Body2)vBody;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
//Debug.Print("Body--> " + swBody.Name + " " + "");
bodyNamesCustomer.Add(swBody.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesCustomer[0], sendToCustomerBodies.GetSelectByIDString(), assemblyDoc, sendToCustomerBodies, insertComponentSendtoCustomer, ref different1);
if (bodyNamesCustomer.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesCustomer.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "localBodies-" + (i + 2), out returnpart);
sendToCustomerBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesCustomer[i + 1], partSelect, assemblyDoc, returnpart, insertComponentSendtoCustomer, ref different1);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
Feature theFeature;
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different1 = true;
// //JoinPart1 留下的: 发给客户的没有此部分。 而本地零件中有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//sendToCustomerBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion first join
#region sercond join2
Component2 localBodies = default(Component2);
List <Component2> LocalBodiesList = new List <Component2>();
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out localBodies);
localBodies.Select(true);
assemblyDoc.FixComponent();
localBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = localBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "sendToCustomerBodies-1";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)localBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = localBodies.SaveVirtualComponent(compName);
LocalBodiesList.Add(localBodies);
insertComponentLocal.Select(false);
swModel = (ModelDoc2)localBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesLocal = new List <string>();
PartDoc swPart2 = null;
object vBody2;
swPart2 = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr2 = null;
Body2 swBody2 = default(Body2);
MathTransform swMathTrans2 = null;
vBodyArr2 = (object[])swPart2.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr2 != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr2)
{
vBody2 = vBody_loopVariable;
swBody2 = (Body2)vBody2;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody2.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
bodyNamesLocal.Add(swBody2.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesLocal[0], localBodies.GetSelectByIDString(), assemblyDoc, localBodies, insertComponentLocal, ref different2);
if (bodyNamesLocal.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesLocal.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "sendToCustomerBodies-" + (i + 2), out returnpart);
LocalBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesLocal[i + 1], partSelect, assemblyDoc, returnpart, insertComponentLocal, ref different2);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
//theFeature = swModel.FeatureByPositionReverse(0);
//swModel = (ModelDoc2)localBodies.GetModelDoc2();
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + localBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different2 = true;
// //JoinPart2 留下的: 发给客户的有此部分。 而本地零件中没有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//localBodies.Select(true);
//assemblyDoc.EditAssembly();
#endregion sercond join2
#region joinPartPublic
Component2 publicBodies = default(Component2);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out publicBodies);
publicBodies.Select(true);
assemblyDoc.FixComponent();
publicBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = publicBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "publicBodies";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)publicBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = publicBodies.SaveVirtualComponent(compName);
swModel.ClearSelection();
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
publicBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion joinPartPublic
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
setColour(Color.Red);
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
setColour(Color.Blue);
}
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ClearSelection2(true);
insertComponentLocal.Select(false);
insertComponentSendtoCustomer.Select(true);
swModel.HideComponent2();
swModel.ClearSelection2(true);
publicBodies.Select(false);
assemblyDoc.SetComponentTransparent(true);
setColour(Color.Green);
swModel.EditRebuild3();
swModel.Save();
swModel.SaveAs3(LocalPath + @"\01_CheckResult.sldprt", 0, 0);
swApp.CloseDoc("TopCheck.sldasm");
swApp.CloseAllDocuments(true);
swApp.OpenDoc(LocalPath + @"\01_CheckResult.sldprt", 1);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("*Isometric", 7);
swModel.ViewZoomtofit2();
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, false);
try
{
System.IO.File.Delete(LocalPath + @"\TopCheck.sldasm");
System.IO.File.Delete(LocalPath + @"\localBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\sendToCustomerBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\publicBodies.sldprt");
}
catch (Exception)
{
}
//第二次反向剪切
swApp.CloseDoc(sendTocustomer);
swApp.CloseDoc(localModel);
swModel.FeatureManager.EnableFeatureTree = true;
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, 2);
if (different1 == false && different2 == false)
{
return(false);
}
else
{
return(true);
}
}
protected override void Command()
{
Ass = MdlBase.eAssemblyDoc();
try
{
CurveDrivenPatternFeatureData def = FonctionRepetition.GetDefinition();
Object[] tabB = def.PatternBodyArray;
Body2 b = (Body2)tabB[0];
MathTransform compRepetTrans = ComposantRepetition.Transform2;
MathTransform baseMarcheTrans = Marche.Transform2;
Vertex v = (Vertex)Point;
Edge e = (Edge)Arrete;
List <Face2> ListeFace = FonctionRepetition.eListeDesFaces();
Sketch sk = PointMarche.GetSketch();
Feature fPointMarche = (Feature)sk;
List <Component2> ListeComposants = new List <Component2>()
{
Marche
};
Double arr = 0.0001;
for (int i = 1; i <= (def.D1InstanceCount + def.D2InstanceCount); i++)
{
MathTransform bodyTrans = def.GetTransform(i);
if (bodyTrans.IsNull())
{
break;
}
MathTransform Transform = compRepetTrans.Inverse();
Transform = Transform.Multiply(bodyTrans);
Transform = Transform.Multiply(compRepetTrans);
Transform = baseMarcheTrans.Multiply(Transform);
gPoint pt = new gPoint(v);
gSegment sg = new gSegment(e);
pt.MultiplyTransfom(bodyTrans);
sg.MultiplyTransfom(bodyTrans);
Vertex vertex = null;
Edge edge = null;
foreach (Face2 face in ListeFace)
{
foreach (Edge ed in face.eListeDesArretes())
{
gSegment s = new gSegment(ed);
if (sg.Compare(s, arr))
{
edge = ed;
}
if (s.Start.Comparer(pt, arr))
{
vertex = ed.GetStartVertex();
}
if (s.End.Comparer(pt, arr))
{
vertex = ed.GetEndVertex();
}
if (edge.IsRef() && vertex.IsRef())
{
break;
}
}
if (edge.IsRef() && vertex.IsRef())
{
break;
}
}
Entity eVertex = (Entity)vertex;
Entity eEdge = (Entity)edge;
Component2 cp = Ass.AddComponent5(Marche.GetPathName(), (int)swAddComponentConfigOptions_e.swAddComponentConfigOptions_CurrentSelectedConfig, "", false, "", 0, 0, 0);
if (cp.IsNull())
{
continue;
}
// Quand on réinsere un composant, les précédentes contraintes sont recrées.
// On les supprime pour eviter des conflits
Object[] Mates = cp.GetMates();
if (Mates.IsRef())
{
foreach (Feature mate in Mates)
{
mate.eSelect();
MdlBase.Extension.DeleteSelection2((int)swDeleteSelectionOptions_e.swDelete_Absorbed);
}
}
WindowLog.Ecrire(cp.Name2);
cp.Transform2 = Transform;
ListeComposants.Add(cp);
int longstatus = 0;
MdlBase.eEffacerSelection();
eVertex.eSelectEntite(false);
Feature f = cp.FeatureByName(fPointMarche.Name);
Sketch sketchOrigine = f.GetSpecificFeature2();
Object[] tabPt = sketchOrigine.GetSketchPoints2();
SketchPoint origine = (SketchPoint)tabPt[0];
origine.Select4(true, null);
Mate2 mPoint = Ass.AddMate5((int)swMateType_e.swMateCOINCIDENT,
(int)swMateAlign_e.swMateAlignCLOSEST, false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, 0, out longstatus);
MdlBase.eEffacerSelection();
MdlBase.eEffacerSelection();
eEdge.eSelectEntite(false);
cp.FeatureByName(AxeMarche.Name).eSelect(true);
Mate2 mAxe = Ass.AddMate5((int)swMateType_e.swMateANGLE,
(int)swMateAlign_e.swAlignNONE, false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, 0, out longstatus);
MdlBase.eEffacerSelection();
MdlBase.eEffacerSelection();
Plan.eSelect(false);
cp.FeatureByName(PlanMarche.Name).eSelect(true);
Mate2 mPlan = Ass.AddMate5((int)swMateType_e.swMatePARALLEL,
(int)swMateAlign_e.swAlignNONE, false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, 0, out longstatus);
MdlBase.eEffacerSelection();
Feature m = (Feature)mPoint;
WindowLog.Ecrire(" " + m.Name);
m = (Feature)mAxe;
WindowLog.Ecrire(" " + m.Name);
m = (Feature)mPlan;
WindowLog.Ecrire(" " + m.Name);
}
MdlBase.eEffacerSelection();
foreach (var cp in ListeComposants)
{
cp.eSelectById(MdlBase, -1, true);
}
Feature Dossier = MdlBase.FeatureManager.InsertFeatureTreeFolder2((int)swFeatureTreeFolderType_e.swFeatureTreeFolder_Containing);
Dossier.eRenommerFonction(String.Format("Marches ({0} {1}) ", ComposantRepetition.Name2, FonctionRepetition.Name));
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
/// <summary>
///
/// </summary>
/// <param name="assemblyName"></param>
/// <param name="partsname"></param>
private void CreateNewAssembly(string assemblyName, List <string> partsname)
{
string assemblyDefaultPath = iswApp.GetDocumentTemplate(2, "", 0, 0, 0);
var part = iswApp.NewDocument(assemblyDefaultPath, 0, 0, 0);
if (part != null)
{
AssemblyDoc assemblyDoc = part as AssemblyDoc;
ModelDoc2 modelDoc2 = assemblyDoc as ModelDoc2;
ModelDocExtension swModExt = default(ModelDocExtension);
int errors = 0;
int warnings = 0;
swModExt = (ModelDocExtension)modelDoc2.Extension;
swModExt.SaveAs(assemblyName,
(int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, errors, warnings);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
int i = 0;
int tempV = ProgressBar.Value;
foreach (var partN in partsname)
{
labStatus.Text = "正在装配-->" + Path.GetFileNameWithoutExtension(partN);
ProgressBar.Value = tempV + i;
iswApp.OpenDoc6(partN.ToString(), 1, 32, "", ref errors, ref warnings);
assemblyDoc = (AssemblyDoc)iswApp.ActivateDoc3(System.IO.Path.GetFileNameWithoutExtension(assemblyName) + ".sldasm", true, 0, errors);
Component2 swInsertedComponent = default(Component2);
swInsertedComponent = assemblyDoc.AddComponent5(partN, 0, "", false, "", 0, 0, 0);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
modelDoc2.ClearSelection2(true);
modelDoc2.Extension.SelectByID2(swInsertedComponent.GetSelectByIDString(), "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDoc.UnfixComponent();
modelDoc2.ClearSelection2(true);
modelDoc2.Extension.SelectByID2("Point1@Origin@" + swInsertedComponent.GetSelectByIDString(), "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
modelDoc2.Extension.SelectByID2("Point1@Origin", "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
Mate2 mate2 = default(Mate2);
mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0, 0, 0, 0.001, 0, 0, 0, false, false, 0, out int warings);
modelDoc2.ClearSelection2(true);
modelDoc2.EditRebuild3();
iswApp.CloseDoc(partN);
i = i + 1;
}
iswApp.ActivateDoc3(System.IO.Path.GetFileNameWithoutExtension(assemblyName) + ".sldasm", true, 0, errors);
modelDoc2 = (ModelDoc2)iswApp.ActiveDoc;
modelDoc2.ShowNamedView2("*等轴测", 7);
modelDoc2.ViewZoomtofit2();
modelDoc2.Save();
}
ProgressBar.Value = ProgressBar.Maximum;
}
static void InsertComponents(AssemblyDoc assembly, ModelDoc2 component1, ModelDoc2 component2)
{
/* This will insert the components into the newly created
* assembly and mate them so their origins are aligned */
ModelDoc2 swModel = (ModelDoc2)assembly;
ModelDocExtension swDocExt = swModel.Extension;
int mateError;
string mateName;
string firstSelection = "";
string secondSelection = "";
// Add Component1
swComp1 = assembly.AddComponent5(component1.GetPathName(), (int)swAddComponentConfigOptions_e.swAddComponentConfigOptions_CurrentSelectedConfig, "",
false, "", 0, 0, 0);
string comp1Name = swComp1.Name2;
if (swComp1 == null)
{
Logger.Warn("Component addition was unsuccessful.");
}
else
{
// Logger.Info("Component added successfully.");
}
// Add Component2
swComp2 = assembly.AddComponent5(component2.GetPathName(), (int)swAddComponentConfigOptions_e.swAddComponentConfigOptions_CurrentSelectedConfig, "",
false, "", 0, 0, 0);
string comp2Name = swComp2.Name2;
if (swComp2 == null)
{
Logger.Warn("Component addition was unsuccessful.");
}
else
{
// Logger.Info("Component added successfully.");
}
// Add Mate 1
swModel.ClearSelection();
mateName = "Aligned_Origins";
if (lang == "french")
{
firstSelection = "Point1@Origine@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Point1@Origine@" + comp2Name + "@" + swModel.GetTitle();
}
else if (lang == "english")
{
firstSelection = "Point1@Origin@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Point1@Origin@" + comp2Name + "@" + swModel.GetTitle();
}
else
{
Logger.Error("VolumeComparator.cs", "InsertComponents()", "Could not create mate since language is not recognized.");
}
boolstat = swDocExt.SelectByID2(firstSelection, "EXTSKETCHPOINT", 0, 0, 0, false, 1, null, 0);
boolstat = swDocExt.SelectByID2(secondSelection, "EXTSKETCHPOINT", 0, 0, 0, true, 1, null, 0);
mateFeature = (Feature)assembly.AddMate5((int)swMateType_e.swMateCOINCIDENT, (int)swMateAlign_e.swMateAlignALIGNED,
false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, (int)swMateWidthOptions_e.swMateWidth_Centered, out mateError);
if (mateError != 1)
{
Logger.Error("VolumeComparator", "InsertComponent", "swAddMateError: " + mateError);
}
mateFeature.Name = mateName;
swModel.ClearSelection();
// Add Mate 2
swModel.ClearSelection();
mateName = "Aligned_Top";
if (lang == "french")
{
firstSelection = "Plan de dessus@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Plan de dessus@" + comp2Name + "@" + swModel.GetTitle();
}
else if (lang == "english")
{
firstSelection = "Top@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Top@" + comp2Name + "@" + swModel.GetTitle();
}
else
{
Logger.Error("VolumeComparator.cs", "InsertComponents()", "Could not create mate since language is not recognized.");
}
boolstat = swDocExt.SelectByID2(firstSelection, "PLANE", 0, 0, 0, false, 1, null, 0);
boolstat = swDocExt.SelectByID2(secondSelection, "PLANE", 0, 0, 0, true, 1, null, 0);
if (!boolstat)
{
firstSelection = "Top Plane@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Top Plane@" + comp2Name + "@" + swModel.GetTitle();
boolstat = swDocExt.SelectByID2(firstSelection, "PLANE", 0, 0, 0, false, 1, null, 0);
boolstat = swDocExt.SelectByID2(secondSelection, "PLANE", 0, 0, 0, true, 1, null, 0);
}
mateFeature = (Feature)assembly.AddMate5((int)swMateType_e.swMateCOINCIDENT, (int)swMateAlign_e.swMateAlignALIGNED,
false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, (int)swMateWidthOptions_e.swMateWidth_Centered, out mateError);
if (mateError != 1)
{
Logger.Error("VolumeComparator", "InsertComponent", "swAddMateError: " + mateError);
}
mateFeature.Name = mateName;
swModel.ClearSelection();
// Add Mate 3
swModel.ClearSelection();
mateName = "Aligned_Front";
if (lang == "french")
{
firstSelection = "Plan de face@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Plan de face@" + comp2Name + "@" + swModel.GetTitle();
}
else if (lang == "english")
{
firstSelection = "Front@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Front@" + comp2Name + "@" + swModel.GetTitle();
}
else
{
Logger.Error("VolumeComparator.cs", "InsertComponents()", "Could not create mate since language is not recognized.");
}
boolstat = swDocExt.SelectByID2(firstSelection, "PLANE", 0, 0, 0, false, 1, null, 0);
boolstat = swDocExt.SelectByID2(secondSelection, "PLANE", 0, 0, 0, true, 1, null, 0);
if (!boolstat)
{
firstSelection = "Front Plane@" + comp1Name + "@" + swModel.GetTitle();
secondSelection = "Front Plane@" + comp2Name + "@" + swModel.GetTitle();
boolstat = swDocExt.SelectByID2(firstSelection, "PLANE", 0, 0, 0, false, 1, null, 0);
boolstat = swDocExt.SelectByID2(secondSelection, "PLANE", 0, 0, 0, true, 1, null, 0);
}
mateFeature = (Feature)assembly.AddMate5((int)swMateType_e.swMateCOINCIDENT, (int)swMateAlign_e.swMateAlignALIGNED,
false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, (int)swMateWidthOptions_e.swMateWidth_Centered, out mateError);
if (mateError != 1)
{
Logger.Error("VolumeComparator", "InsertComponent", "swAddMateError: " + mateError);
}
mateFeature.Name = mateName;
swModel.ClearSelection();
}