/// <summary>
/// Multiplier that reduces the chance of failure right after an inspection.
/// </summary>
private float InspectionLambdaMultiplier()
{
float elapsed = (DangIt.Now() - this.TimeOfLastInspection);
// Constrain it between 0 and 1
return(Math.Max(0f, Math.Min(elapsed / this.InspectionBonus, 1f)));
}
public void Inspect()
{
StringBuilder sb = new StringBuilder();
List <FailureModule> failModules = part.Modules.OfType <FailureModule>().ToList();
// The part doesn't have any failure module:
// instead of a black message, return a placeholder
if (failModules.Count == 0)
{
sb.AppendLine("This part seems to be as good as new");
}
else
{
foreach (FailureModule fm in failModules)
{
fm.TimeOfLastInspection = DangIt.Now(); // set the time of inspection so that the module gains the inspection bonus
sb.AppendLine(fm.ScreenName + ":");
sb.AppendLine(fm.InspectionMessage());
sb.AppendLine("");
}
}
DangIt.PostMessage("Inspection results",
sb.ToString(),
MessageSystemButton.MessageButtonColor.BLUE,
MessageSystemButton.ButtonIcons.MESSAGE,
overrideMute: true);
}
public void Inspect()
{
StringBuilder sb = new StringBuilder();
List <FailureModule> failModules = part.Modules.OfType <FailureModule>().ToList();
if (failModules.Count == 0)
{
sb.AppendLine("This part seems to be as good as new");
}
foreach (FailureModule fm in failModules)
{
fm.TimeOfLastInspection = DangIt.Now();
sb.AppendLine(fm.InspectionName + ":");
sb.AppendLine(fm.InspectionMessage());
sb.AppendLine("");
}
DangIt.PostMessage("Inspection results",
sb.ToString(),
MessageSystemButton.MessageButtonColor.BLUE,
MessageSystemButton.ButtonIcons.MESSAGE,
overrideMute: true);
}
/// <summary>
/// Module re-start logic. OnStart will be called usually once for each scene,
/// editor included.
/// Put your custom start logic in DI_Start(): if you need to act on other part's
/// variable, this is the place to do it, not DI_Reset()
/// </summary>
public override void OnStart(PartModule.StartState state)
{
try
{
if (HighLogic.LoadedSceneIsFlight) // nothing to do in editor
{
this.Log("Starting in flight: last reset " + TimeOfLastReset + ", now " + DangIt.Now());
// Reset the internal state at the beginning of the flight
// this condition also catches a revert to launch (+1 second for safety)
if (DangIt.Now() < (this.TimeOfLastReset + 1))
this.Reset();
// If the part was saved when it was failed,
// re-run the failure logic to disable it
// ONLY THE DISABLING PART IS RUN!
if (this.HasFailed)
this.DI_Disable();
DangIt.ResetShipGlow(this.part.vessel);
}
this.DI_Start(state);
this.StartCoroutine("RuntimeFetch");
}
catch (Exception e)
{
OnError(e);
}
}
/// <summary>
/// Update logic on every physics frame update.
/// Place your custom update logic in DI_Update()
/// </summary>
public void FixedUpdate()
{
try
{
// Only update the module during flight and after the re-initialization has run
if (HighLogic.LoadedSceneIsFlight && this.HasInitted)
{
float now = DangIt.Now();
float dt = now - LastFixedUpdate;
this.LastFixedUpdate = now;
// The temperature aging is independent from the use of the part
this.Age += (dt * this.TemperatureMultiplier());
if (!PartIsActive() || !DangIt.Instance.CurrentSettings.EnabledForSave)
{
return;
}
else
{
this.Age += dt;
this.CurrentMTBF = this.MTBF * this.ExponentialDecay();
// If the part has not already failed, toss the dice
if (!this.HasFailed)
{
float f = this.Lambda();
#if DEBUG
if (printChances)
{
print("this.Lambda: " + f.ToString());
}
#endif
if (UnityEngine.Random.Range(0f, 1f) < f)
{
this.Fail();
}
}
// Run custom update logic
this.DI_Update();
}
}
}
catch (Exception e)
{
OnError(e);
}
}
/// <summary>
/// Multiplier that reduces the chance of failure right after an inspection.
/// </summary>
private float InspectionLambdaMultiplier()
{
float elapsed = (DangIt.Now() - this.TimeOfLastInspection);
// Constrain it between 0 and 1
float f = Math.Max(0f, Math.Min(elapsed / this.InspectionBonus, 1f));
#if DEBUG
if (printChances)
print("InspectionLambdaMultiplier: " + f.ToString());
#endif
return f;
}
/// <summary>
/// Resets the failure state and age tracker.
/// This must be called only at the beginning of the flight to initialize the age tracking.
/// Put your reset logic in DI_Reset()
/// </summary>
protected void Reset()
{
Debug.Log("Reset(), HasInitted: " + HasInitted.ToString());
#region Fail and repair events
this.Events["Fail"].guiName = this.FailGuiName;
this.Events["EvaRepair"].guiName = this.EvaRepairGuiName;
this.Events["EvaRepair"].active = false;
this.Events["Maintenance"].guiName = this.MaintenanceString;
if (this.HasInitted)
return;
#endregion
try
{
this.FailureLog("Resetting");
float now = DangIt.Now();
#region Internal state
this.Age = 0;
this.TimeOfLastReset = now;
this.LastFixedUpdate = now;
this.TimeOfLastInspection = float.NegativeInfinity;
this.CurrentMTBF = this.MTBF * HighLogic.CurrentGame.Parameters.CustomParams<DangItCustomParams1>().MTBF_Multiplier;
this.LifeTimeSecs = this.LifeTime * HighLogic.CurrentGame.Parameters.CustomParams<DangItCustomParams1>().Lifetime_Multiplier * 3600f;
this.HasFailed = false;
#endregion
// Run the custom reset of the subclasses
this.DI_Reset();
this.HasInitted = true;
}
catch (Exception e)
{
OnError(e);
}
}
/// <summary>
/// Update logic on every physics frame update.
/// Place your custom update logic in DI_Update()
/// </summary>
public void FixedUpdate()
{
try
{
// Only update the module during flight and after the re-initialization has run
if (HighLogic.LoadedSceneIsFlight && this.HasInitted)
{
float now = DangIt.Now();
float dt = now - LastFixedUpdate;
// The temperature aging is independent from the use of the part
this.Age += dt * this.TemperatureMultiplier();
if (!PartIsActive())
{
this.LastFixedUpdate = now;
return;
}
// If control reaches this point, the part is active: add the elapsed time to the age
this.Age += dt;
this.CurrentMTBF = this.MTBF * this.ExponentialDecay();
// If the part has not already failed, toss the dice
if (!this.HasFailed)
{
if (UnityEngine.Random.Range(0f, 1f) < this.Lambda())
{
this.Fail();
}
}
// Run custom update logic
this.DI_Update();
this.LastFixedUpdate = now;
}
}
catch (Exception e)
{
OnError(e);
}
}
/// <summary>
/// Resets the failure state and age tracker.
/// This must be called only at the beginning of the flight to initialize the age tracking.
/// Put your reset logic in DI_Reset()
/// </summary>
protected void Reset()
{
try
{
this.Log("Resetting");
float now = DangIt.Now();
#region Internal state
this.Age = 0;
this.TimeOfLastReset = now;
this.LastFixedUpdate = now;
this.TimeOfLastInspection = float.NegativeInfinity;
this.CurrentMTBF = this.MTBF;
this.LifeTimeSecs = this.LifeTime * 3600f;
this.HasFailed = false;
#endregion
#region Fail and repair events
this.Events["Fail"].guiName = this.FailGuiName;
this.Events["EvaRepair"].guiName = this.EvaRepairGuiName;
this.Events["EvaRepair"].active = false;
this.Events["Maintenance"].guiName = this.MaintenanceString;
#endregion
// Run the custom reset of the subclasses
this.DI_Reset();
this.HasInitted = true;
}
catch (Exception e)
{
OnError(e);
}
}
private float InspectionMultiplier()
{
float elapsed = (DangIt.Now() - this.TimeOfLastInspection);
return Math.Max(0f, Math.Min(elapsed / this.InspectionBonus, 1f));
}
/// <summary>
/// Update logic on every physics frame update.
/// Place your custom update logic in DI_Update()
/// </summary>
public void FixedUpdate()
{
try
{
// Only update the module during flight and after the re-initialization has run
if (HighLogic.LoadedSceneIsFlight && this.HasInitted)
{
// Highlighting the part, which contains this updating FailureModule if it is in a 'failed' state,
// it is not in 'silent' state and 'glow' is globally enabled
// Actually, there is not any place in a code of the whole mod where that 'silent' state is turning on
// (maybe some FailureModules can be defined as 'silent' by editing files)
if (this.HasFailed && !this.Silent && (DangIt.Instance.CurrentSettings.Glow && (AlarmManager.visibleUI || !DangIt.Instance.CurrentSettings.DisableGlowOnF2)))
{
this.part.SetHighlightDefault();
this.part.SetHighlightColor(Color.red);
this.part.SetHighlightType(Part.HighlightType.AlwaysOn);
this.part.highlighter.ConstantOn(Color.red);
this.part.highlighter.SeeThroughOn();
this.part.SetHighlight(true, false);
} else
// Turning off the highlighting of the part, which contains this updating FailureModule
// if it is not in a 'failed' state, or it is in 'silent' state, or if 'glow' is globally disabled
// if (!this.HasFailed || this.Silent || !DangIt.Instance.CurrentSettings.Glow || (!visibleUI && DangIt.Instance.CurrentSettings.DisableGlowOnF2))
{
if (!AlarmManager.partFailures.ContainsKey(this.part))
this.part.SetHighlightDefault();
}
float now = DangIt.Now();
float dt = now - LastFixedUpdate;
this.LastFixedUpdate = now;
// The temperature aging is independent from the use of the part
this.Age += (dt * this.TemperatureMultiplier());
if (!PartIsActive() || !DangIt.Instance.CurrentSettings.EnabledForSave)
return;
else
{
this.Age += dt;
this.CurrentMTBF = this.MTBF * HighLogic.CurrentGame.Parameters.CustomParams<DangItCustomParams1>().MTBF_Multiplier * this.ExponentialDecay();
// If the part has not already failed, toss the dice
if (!this.HasFailed)
{
float f = this.Lambda();
#if DEBUG
// if (printChances)
// Logger.Debug("this.Lambda: " + f.ToString());
#endif
if (UnityEngine.Random.Range(0f, 1f) < f)
{
this.Fail();
}
}
// Run custom update logic
this.DI_Update();
}
}
}
catch (Exception e)
{
OnError(e);
}
}
/// <summary>
/// Module re-start logic. OnStart will be called usually once for each scene, editor included.
/// Put your custom start logic in DI_Start(): if you need to act on other part's
/// variable, this is the place to do it, not DI_Reset()
/// </summary>
public override void OnStart(PartModule.StartState state)
{
Logger.Info("FailureModule.OnStart");
try
{
if (HighLogic.LoadedSceneIsFlight) // nothing to do in editor
{
this.FailureLog("Starting in flight: last reset " + TimeOfLastReset + ", now " + DangIt.Now());
if (!DangIt.Instance.CurrentSettings.EnabledForSave)
{ //Disable if we've disabled DangIt
foreach (var e in this.Events)
{
e.guiActive = false;
}
}
// Reset the internal state at the beginning of the flight
// this condition also catches a revert to launch (+1 second for safety)
// if (DangIt.Now() < (this.TimeOfLastReset + 1))
this.Reset();
// If the part was saved when it was failed,
// re-run the failure logic to disable it
// ONLY THE DISABLING PART IS RUN!
if (this.HasFailed)
this.DI_Disable();
}
if (DangIt.Instance.CurrentSettings.EnabledForSave)
{
this.DI_Start(state);
this.StartCoroutine("RuntimeFetch");
}
}
catch (Exception e)
{
OnError(e);
}
}
