// return point that minimizes quadric error for edge [ea,eb]
Vector3d OptimalPoint(int eid, ref QuadricError q, int ea, int eb)
{
// if we would like to preserve boundary, we need to know that here
// so that we properly score these edges
if (HaveBoundary && PreserveBoundary)
{
if (mesh.IsBoundaryEdge(eid))
{
return((mesh.GetVertex(ea) + mesh.GetVertex(eb)) * 0.5);
}
else
{
if (IsBoundaryV(ea))
{
return(mesh.GetVertex(ea));
}
else if (IsBoundaryV(eb))
{
return(mesh.GetVertex(eb));
}
}
}
// [TODO] if we have constraints, we should apply them here, for same reason as bdry above...
if (MinimizeQuadricPositionError == false)
{
return(project((mesh.GetVertex(ea) + mesh.GetVertex(eb)) * 0.5));
}
else
{
Vector3d result = Vector3d.Zero;
if (q.OptimalPoint(ref result))
{
return(project(result));
}
// degenerate matrix, evaluate quadric at edge end and midpoints
// (could do line search here...)
Vector3d va = mesh.GetVertex(ea);
Vector3d vb = mesh.GetVertex(eb);
Vector3d c = project((va + vb) * 0.5);
double fa = q.Evaluate(va);
double fb = q.Evaluate(vb);
double fc = q.Evaluate(c);
double m = MathUtil.Min(fa, fb, fc);
if (m == fa)
{
return(va);
}
else if (m == fb)
{
return(vb);
}
return(c);
}
}
protected virtual ProcessResult ProcessEdge(int edgeID)
{
RuntimeDebugCheck(edgeID);
EdgeConstraint constraint =
(constraints == null) ? EdgeConstraint.Unconstrained : constraints.GetEdgeConstraint(edgeID);
if (constraint.NoModifications)
{
return(ProcessResult.Ignored_EdgeIsFullyConstrained);
}
// look up verts and tris for this edge
int a = 0, b = 0, t0 = 0, t1 = 0;
if (mesh.GetEdge(edgeID, ref a, ref b, ref t0, ref t1) == false)
{
return(ProcessResult.Failed_NotAnEdge);
}
bool bIsBoundaryEdge = (t1 == DMesh3.InvalidID);
// look up 'other' verts c (from t0) and d (from t1, if it exists)
Index3i T0tv = mesh.GetTriangle(t0);
int c = IndexUtil.find_tri_other_vtx(a, b, T0tv);
Index3i T1tv = (bIsBoundaryEdge) ? DMesh3.InvalidTriangle : mesh.GetTriangle(t1);
int d = (bIsBoundaryEdge) ? DMesh3.InvalidID : IndexUtil.find_tri_other_vtx(a, b, T1tv);
Vector3d vA = mesh.GetVertex(a);
Vector3d vB = mesh.GetVertex(b);
double edge_len_sqr = (vA - vB).LengthSquared;
begin_collapse();
// check if we should collapse, and also find which vertex we should collapse to,
// in cases where we have constraints/etc
int collapse_to = -1;
bool bCanCollapse = EnableCollapses &&
constraint.CanCollapse &&
edge_len_sqr < MinEdgeLength * MinEdgeLength &&
can_collapse_constraints(edgeID, a, b, c, d, t0, t1, out collapse_to);
// optimization: if edge cd exists, we cannot collapse or flip. look that up here?
// funcs will do it internally...
// (or maybe we can collapse if cd exists? edge-collapse doesn't check for it explicitly...)
// if edge length is too short, we want to collapse it
bool bTriedCollapse = false;
if (bCanCollapse)
{
int iKeep = b, iCollapse = a;
Vector3d vNewPos = (vA + vB) * 0.5;
// if either vtx is fixed, collapse to that position
if (collapse_to == b)
{
vNewPos = vB;
}
else if (collapse_to == a)
{
iKeep = a; iCollapse = b;
vNewPos = vA;
}
else
{
vNewPos = get_projected_collapse_position(iKeep, vNewPos);
}
// TODO be smart about picking b (keep vtx).
// - swap if one is bdry vtx, for example?
// lots of cases where we cannot collapse, but we should just let
// mesh sort that out, right?
COUNT_COLLAPSES++;
DMesh3.EdgeCollapseInfo collapseInfo;
MeshResult result = mesh.CollapseEdge(iKeep, iCollapse, out collapseInfo);
if (result == MeshResult.Ok)
{
mesh.SetVertex(iKeep, vNewPos);
if (constraints != null)
{
constraints.ClearEdgeConstraint(edgeID);
constraints.ClearEdgeConstraint(collapseInfo.eRemoved0);
if (collapseInfo.eRemoved1 != DMesh3.InvalidID)
{
constraints.ClearEdgeConstraint(collapseInfo.eRemoved1);
}
constraints.ClearVertexConstraint(iCollapse);
}
OnEdgeCollapse(edgeID, iKeep, iCollapse, collapseInfo);
DoDebugChecks();
return(ProcessResult.Ok_Collapsed);
}
else
{
bTriedCollapse = true;
}
}
end_collapse();
begin_flip();
// if this is not a boundary edge, maybe we want to flip
bool bTriedFlip = false;
if (EnableFlips && constraint.CanFlip && bIsBoundaryEdge == false)
{
// don't want to flip if it will invert triangle...tetrahedron sign??
// can we do this more efficiently somehow?
bool a_is_boundary_vtx = (MeshIsClosed) ? false : (bIsBoundaryEdge || mesh.vertex_is_boundary(a));
bool b_is_boundary_vtx = (MeshIsClosed) ? false : (bIsBoundaryEdge || mesh.vertex_is_boundary(b));
bool c_is_boundary_vtx = (MeshIsClosed) ? false : mesh.vertex_is_boundary(c);
bool d_is_boundary_vtx = (MeshIsClosed) ? false : mesh.vertex_is_boundary(d);
int valence_a = mesh.GetVtxEdgeCount(a), valence_b = mesh.GetVtxEdgeCount(b);
int valence_c = mesh.GetVtxEdgeCount(c), valence_d = mesh.GetVtxEdgeCount(d);
int valence_a_target = (a_is_boundary_vtx) ? valence_a : 6;
int valence_b_target = (b_is_boundary_vtx) ? valence_b : 6;
int valence_c_target = (c_is_boundary_vtx) ? valence_c : 6;
int valence_d_target = (d_is_boundary_vtx) ? valence_d : 6;
// if total valence error improves by flip, we want to do it
int curr_err = Math.Abs(valence_a - valence_a_target) + Math.Abs(valence_b - valence_b_target)
+ Math.Abs(valence_c - valence_c_target) + Math.Abs(valence_d - valence_d_target);
int flip_err = Math.Abs((valence_a - 1) - valence_a_target) + Math.Abs((valence_b - 1) - valence_b_target)
+ Math.Abs((valence_c + 1) - valence_c_target) + Math.Abs((valence_d + 1) - valence_d_target);
if (flip_err < curr_err)
{
// try flip
DMesh3.EdgeFlipInfo flipInfo;
COUNT_FLIPS++;
MeshResult result = mesh.FlipEdge(edgeID, out flipInfo);
if (result == MeshResult.Ok)
{
DoDebugChecks();
return(ProcessResult.Ok_Flipped);
}
else
{
bTriedFlip = true;
}
}
}
end_flip();
begin_split();
// if edge length is too long, we want to split it
bool bTriedSplit = false;
if (EnableSplits && constraint.CanSplit && edge_len_sqr > MaxEdgeLength * MaxEdgeLength)
{
DMesh3.EdgeSplitInfo splitInfo;
COUNT_SPLITS++;
MeshResult result = mesh.SplitEdge(edgeID, out splitInfo);
if (result == MeshResult.Ok)
{
update_after_split(edgeID, a, b, splitInfo);
OnEdgeSplit(edgeID, a, b, splitInfo);
DoDebugChecks();
return(ProcessResult.Ok_Split);
}
else
{
bTriedSplit = true;
}
}
end_split();
if (bTriedFlip || bTriedSplit || bTriedCollapse)
{
return(ProcessResult.Failed_OpNotSuccessful);
}
else
{
return(ProcessResult.Ignored_EdgeIsFine);
}
}
public Vector3d GetVertex(int i) {
return Mesh.GetVertex(Vertices[i]);
}
// return point that minimizes quadric error for edge [ea,eb]
Vector3d OptimalPoint(QuadricError q, int ea, int eb)
{
if (MinimizeQuadricPositionError == false)
{
return((mesh.GetVertex(ea) + mesh.GetVertex(eb)) * 0.5);
}
else
{
try {
return(q.OptimalPoint());
} catch {
// degenerate matrix, evaluate quadric at edge end and midpoints
// (could do line search here...)
Vector3d va = mesh.GetVertex(ea);
Vector3d vb = mesh.GetVertex(eb);
Vector3d c = (va + vb) * 0.5;
double fa = q.Evaluate(va);
double fb = q.Evaluate(vb);
double fc = q.Evaluate(c);
double m = MathUtil.Min(fa, fb, fc);
if (m == fa)
{
return(va);
}
else if (m == fb)
{
return(vb);
}
return(c);
}
}
}
/// <summary>
/// Apply LaplacianMeshSmoother to subset of mesh triangles.
/// border of subset always has soft constraint with borderWeight,
/// but is then snapped back to original vtx pos after solve.
/// nConstrainLoops inner loops are also soft-constrained, with weight falloff via square roots (defines continuity)
/// interiorWeight is soft constraint added to all vertices
/// </summary>
public static void RegionSmooth(DMesh3 mesh, IEnumerable <int> triangles,
int nConstrainLoops,
int nIncludeExteriorRings,
bool bPreserveExteriorRings,
double borderWeight = 10.0, double interiorWeight = 0.0)
{
HashSet <int> fixedVerts = new HashSet <int>();
if (nIncludeExteriorRings > 0)
{
MeshFaceSelection expandTris = new MeshFaceSelection(mesh);
expandTris.Select(triangles);
if (bPreserveExteriorRings)
{
MeshEdgeSelection bdryEdges = new MeshEdgeSelection(mesh);
bdryEdges.SelectBoundaryTriEdges(expandTris);
expandTris.ExpandToOneRingNeighbours(nIncludeExteriorRings);
MeshVertexSelection startVerts = new MeshVertexSelection(mesh);
startVerts.SelectTriangleVertices(triangles);
startVerts.DeselectEdges(bdryEdges);
MeshVertexSelection expandVerts = new MeshVertexSelection(mesh, expandTris);
foreach (int vid in expandVerts)
{
if (startVerts.IsSelected(vid) == false)
{
fixedVerts.Add(vid);
}
}
}
else
{
expandTris.ExpandToOneRingNeighbours(nIncludeExteriorRings);
}
triangles = expandTris;
}
RegionOperator region = new RegionOperator(mesh, triangles);
DSubmesh3 submesh = region.Region;
DMesh3 smoothMesh = submesh.SubMesh;
LaplacianMeshSmoother smoother = new LaplacianMeshSmoother(smoothMesh);
// map fixed verts to submesh
HashSet <int> subFixedVerts = new HashSet <int>();
foreach (int base_vid in fixedVerts)
{
subFixedVerts.Add(submesh.MapVertexToSubmesh(base_vid));
}
// constrain borders
double w = borderWeight;
HashSet <int> constrained = (submesh.BaseBorderV.Count > 0) ? new HashSet <int>() : null;
foreach (int base_vid in submesh.BaseBorderV)
{
int sub_vid = submesh.BaseToSubV[base_vid];
smoother.SetConstraint(sub_vid, smoothMesh.GetVertex(sub_vid), w, true);
if (constrained != null)
{
constrained.Add(sub_vid);
}
}
if (constrained.Count > 0)
{
w = Math.Sqrt(w);
for (int k = 0; k < nConstrainLoops; ++k)
{
HashSet <int> next_layer = new HashSet <int>();
foreach (int sub_vid in constrained)
{
foreach (int nbr_vid in smoothMesh.VtxVerticesItr(sub_vid))
{
if (constrained.Contains(nbr_vid) == false)
{
if (smoother.IsConstrained(nbr_vid) == false)
{
smoother.SetConstraint(nbr_vid, smoothMesh.GetVertex(nbr_vid), w, subFixedVerts.Contains(nbr_vid));
}
next_layer.Add(nbr_vid);
}
}
}
constrained.UnionWith(next_layer);
w = Math.Sqrt(w);
}
}
// soft constraint on all interior vertices, if requested
if (interiorWeight > 0)
{
foreach (int vid in smoothMesh.VertexIndices())
{
if (smoother.IsConstrained(vid) == false)
{
smoother.SetConstraint(vid, smoothMesh.GetVertex(vid), interiorWeight, subFixedVerts.Contains(vid));
}
}
}
else if (subFixedVerts.Count > 0)
{
foreach (int vid in subFixedVerts)
{
if (smoother.IsConstrained(vid) == false)
{
smoother.SetConstraint(vid, smoothMesh.GetVertex(vid), 0, true);
}
}
}
smoother.SolveAndUpdateMesh();
region.BackPropropagateVertices(true);
}
protected void compute_full(IEnumerable <int> Triangles)
{
Graph = new DGraph3();
if (WantGraphEdgeInfo)
{
GraphEdges = new DVector <GraphEdgeInfo>();
}
Vertices = new Dictionary <Vector3d, int>();
foreach (int tid in Triangles)
{
Vector3dTuple3 tv = new Vector3dTuple3();
Mesh.GetTriVertices(tid, ref tv.V0, ref tv.V1, ref tv.V2);
Vector3d f = new Vector3d(ValueF(tv.V0), ValueF(tv.V1), ValueF(tv.V2));
// round f to 0 within epsilon?
if (f.x < 0 && f.y < 0 && f.z < 0)
{
continue;
}
if (f.x > 0 && f.y > 0 && f.z > 0)
{
continue;
}
Index3i triVerts = Mesh.GetTriangle(tid);
Index3i triEdges = Mesh.GetTriEdges(tid);
if (f.x * f.y * f.z == 0)
{
int z0 = (f.x == 0) ? 0 : ((f.y == 0) ? 1 : 2);
int i1 = (z0 + 1) % 3, i2 = (z0 + 2) % 3;
if (f[i1] * f[i2] > 0)
{
continue; // single-vertex-crossing case, skip here and let other edges catch it
}
if (f[i1] == 0 || f[i2] == 0)
{
// on-edge case
int z1 = f[i1] == 0 ? i1 : i2;
int e0 = add_or_append_vertex(Mesh.GetVertex(triVerts[z0]));
int e1 = add_or_append_vertex(Mesh.GetVertex(triVerts[z1]));
int graph_eid = Graph.AppendEdge(e0, e1, (int)TriangleCase.OnEdge);
if (WantGraphEdgeInfo)
{
add_on_edge(graph_eid, tid, triEdges[z0]);
}
}
else
{
// edge/vertex case
Util.gDevAssert(f[i1] * f[i2] < 0);
int vert_vid = add_or_append_vertex(Mesh.GetVertex(triVerts[z0]));
int i = i1, j = i2;
if (triVerts[j] < triVerts[i])
{
int tmp = i; i = j; j = tmp;
}
Vector3d cross = find_crossing(tv[i], tv[j], f[i], f[j]);
int cross_vid = add_or_append_vertex(cross);
int graph_eid = Graph.AppendEdge(vert_vid, cross_vid, (int)TriangleCase.EdgeVertex);
if (WantGraphEdgeInfo)
{
add_edge_edge(graph_eid, tid, new Index2i(triEdges[(z0 + 1) % 3], triVerts[z0]));
}
}
}
else
{
Index3i cross_verts = Index3i.Min;
for (int ti = 0; ti < 3; ++ti)
{
int i = ti, j = (ti + 1) % 3;
if (f[i] * f[j] > 0)
{
continue;
}
if (triVerts[j] < triVerts[i])
{
int tmp = i; i = j; j = tmp;
}
Vector3d cross = find_crossing(tv[i], tv[j], f[i], f[j]);
cross_verts[ti] = add_or_append_vertex(cross);
}
int e0 = (cross_verts.a == int.MinValue) ? 1 : 0;
int e1 = (cross_verts.c == int.MinValue) ? 1 : 2;
int ev0 = cross_verts[e0];
int ev1 = cross_verts[e1];
Util.gDevAssert(ev0 != int.MinValue && ev1 != int.MinValue);
int graph_eid = Graph.AppendEdge(ev0, ev1, (int)TriangleCase.EdgeEdge);
if (WantGraphEdgeInfo)
{
add_edge_edge(graph_eid, tid, new Index2i(triEdges[e0], triEdges[e1]));
}
}
}
Vertices = null;
}
internal bool RandomAdjust(g3.DMesh3 mesh, DMeshAABBTree3 tree, Random r, double max, double moveTries, double targetArea)
{
bool moved = false;
if (this.locked)
{
return(false);
}
for (int i = 0; i < moveTries; i++)
{
var v0 = mesh.GetVertex(vertex_index.a);
var v1 = mesh.GetVertex(vertex_index.b);
var v2 = mesh.GetVertex(vertex_index.c);
var v0_old = mesh.GetVertex(vertex_index.a);
var v1_old = mesh.GetVertex(vertex_index.b);
var v2_old = mesh.GetVertex(vertex_index.c);
v0.x += (r.NextDouble() * max * 2 - max);
v0.y += (r.NextDouble() * max * 2 - max);
v0.z += (r.NextDouble() * max * 2 - max);
v1.x += (r.NextDouble() * max * 2 - max);
v1.y += (r.NextDouble() * max * 2 - max);
v1.z += (r.NextDouble() * max * 2 - max);
v2.x += (r.NextDouble() * max * 2 - max);
v2.y += (r.NextDouble() * max * 2 - max);
v2.z += (r.NextDouble() * max * 2 - max);
int tNearestID = tree.FindNearestTriangle(v0);
DistPoint3Triangle3 q = MeshQueries.TriangleDistance(tree.Mesh, tNearestID, v0);
v0 = q.TriangleClosest;
tNearestID = tree.FindNearestTriangle(v1);
q = MeshQueries.TriangleDistance(tree.Mesh, tNearestID, v1);
v1 = q.TriangleClosest;
tNearestID = tree.FindNearestTriangle(v2);
q = MeshQueries.TriangleDistance(tree.Mesh, tNearestID, v2);
v2 = q.TriangleClosest;
double oldArea = (HowCloseToTargetArea(mesh, targetArea, 2) / targetArea) * 3;
double oldAngleQuality = GetTriangleTotalAnglesQualityHelper(mesh, 2);
var n = mesh.GetTriNormal(meshIndex);
double oldNormalQuality = GetNormalQuality(mesh, n, 2) * 6;
mesh.SetVertex(vertex_index.a, v0);
mesh.SetVertex(vertex_index.b, v1);
mesh.SetVertex(vertex_index.c, v2);
double newArea = (HowCloseToTargetArea(mesh, targetArea, 2) / targetArea) * 3;
double newAngleQuality = GetTriangleTotalAnglesQualityHelper(mesh, 2);
double newNormalQuality = GetNormalQuality(mesh, n, 2) * 6;
if ((oldArea + oldAngleQuality + oldNormalQuality) < (newArea + newAngleQuality + newNormalQuality))
{
mesh.SetVertex(vertex_index.a, v0_old);
mesh.SetVertex(vertex_index.b, v1_old);
mesh.SetVertex(vertex_index.c, v2_old);
}
else
{
moved = true;
}
}
return(moved);
}
public void Initialize()
{
ToMeshV = new int[Mesh.MaxVertexID];
ToIndex = new int[Mesh.MaxVertexID];
N = 0;
foreach (int vid in Mesh.VertexIndices())
{
ToMeshV[N] = vid;
ToIndex[vid] = N;
N++;
}
Px = new double[N];
Py = new double[N];
Pz = new double[N];
nbr_counts = new int[N];
M = new SymmetricSparseMatrix();
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
Vector3d v = Mesh.GetVertex(vid);
Px[i] = v.x; Py[i] = v.y; Pz[i] = v.z;
nbr_counts[i] = Mesh.GetVtxEdgeCount(vid);
}
// construct laplacian matrix
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
int n = nbr_counts[i];
double sum_w = 0;
foreach (int nbrvid in Mesh.VtxVerticesItr(vid))
{
int j = ToIndex[nbrvid];
int n2 = nbr_counts[j];
// weight options
//double w = -1;
double w = -1.0 / Math.Sqrt(n + n2);
//double w = -1.0 / n;
M.Set(i, j, w);
sum_w += w;
}
sum_w = -sum_w;
M.Set(vid, vid, sum_w);
}
// compute laplacian vectors of initial mesh positions
MLx = new double[N];
MLy = new double[N];
MLz = new double[N];
M.Multiply(Px, MLx);
M.Multiply(Py, MLy);
M.Multiply(Pz, MLz);
// allocate memory for internal buffers
Preconditioner = new DiagonalMatrix(N);
WeightsM = new DiagonalMatrix(N);
Cx = new double[N]; Cy = new double[N]; Cz = new double[N];
Bx = new double[N]; By = new double[N]; Bz = new double[N];
Sx = new double[N]; Sy = new double[N]; Sz = new double[N];
UpdateForSolve();
}
//
public static DMesh3 RemeshMeshNew(g3.DMesh3 mesh, float minEdgeLength, float maxEdgeLength, float contraintAngle, float smoothSpeed, int smoothPasses, g3.DMesh3 projectMeshInput = null, float projectAmount = 1.0f, float projectedDistance = float.MaxValue)
{
g3.DMesh3 projectMesh = projectMeshInput;
if (projectMesh == null)
{
projectMesh = mesh;
}
DMesh3 projectMeshCopy = new DMesh3(projectMesh);
DMeshAABBTree3 treeProject = new DMeshAABBTree3(projectMeshCopy);
treeProject.Build();
GopherMeshProjectionTarget targetProject = new GopherMeshProjectionTarget()
{
Mesh = projectMeshCopy,
Spatial = treeProject,
amount = projectAmount,
maxDistance = projectedDistance
};
MeshConstraints cons = new MeshConstraints();
EdgeRefineFlags useFlags = EdgeRefineFlags.NoFlip;
foreach (int eid in mesh.EdgeIndices())
{
double fAngle = MeshUtil.OpeningAngleD(mesh, eid);
if (fAngle > contraintAngle)
{
cons.SetOrUpdateEdgeConstraint(eid, new EdgeConstraint(useFlags));
Index2i ev = mesh.GetEdgeV(eid);
//int nSetID0 = (mesh.GetVertex(ev[0]).y > 1) ? 1 : 2;
//int nSetID1 = (mesh.GetVertex(ev[1]).y > 1) ? 1 : 2;
cons.SetOrUpdateVertexConstraint(ev[0], new VertexConstraint(true));
cons.SetOrUpdateVertexConstraint(ev[1], new VertexConstraint(true));
}
}
// TODO Constrain Vertices too far away
foreach (int vid in mesh.VertexIndices())
{
var v = mesh.GetVertex(vid);
//v.Distance()
//targetProject.Project()
}
Remesher rProjected = new Remesher(mesh);
rProjected.SetExternalConstraints(cons);
rProjected.SetProjectionTarget(targetProject);
rProjected.Precompute();
rProjected.EnableFlips = rProjected.EnableSplits = rProjected.EnableCollapses = true;
rProjected.MinEdgeLength = minEdgeLength; //0.1f;
rProjected.MaxEdgeLength = maxEdgeLength; // 0.2f;
rProjected.EnableSmoothing = true;
rProjected.SmoothSpeedT = smoothSpeed; // .5;
if (projectMeshInput != null)
{
float bestSmoothPassProjectAmount = projectAmount / smoothPasses;
float testbestSmoothPassProjectAmount = float.MaxValue;
for (float smoothPassProjectAmount = -.1f; smoothPassProjectAmount < 1.1f; smoothPassProjectAmount += 0.005f)
{
double test = 0;
for (int i = 0; i < smoothPasses; i++)
{
test = 1.0 * smoothPassProjectAmount + test * (1 - smoothPassProjectAmount);
}
if (Math.Abs(test - projectAmount) < Math.Abs(testbestSmoothPassProjectAmount - projectAmount))
{
bestSmoothPassProjectAmount = (float)smoothPassProjectAmount;
testbestSmoothPassProjectAmount = (float)test;
}
}
targetProject.amount = bestSmoothPassProjectAmount;
targetProject.maxDistance = projectedDistance;
for (int k = 0; k < smoothPasses; ++k) // smoothPasses = 20
{
rProjected.BasicRemeshPass();
}
}
else
{
for (int k = 0; k < smoothPasses; ++k) // smoothPasses = 20
{
rProjected.BasicRemeshPass();
}
}
return(mesh);
}
public static DMesh3 RemeshMesh(g3.DMesh3 mesh, float minEdgeLength, float maxEdgeLength, float contraintAngle, float smoothSpeed, int smoothPasses, List <Line3d> constrainedLines)
{
// construct mesh projection target
DMesh3 meshCopy = new DMesh3(mesh);
DMeshAABBTree3 tree = new DMeshAABBTree3(meshCopy);
tree.Build();
MeshProjectionTarget target = new MeshProjectionTarget()
{
Mesh = meshCopy,
Spatial = tree
};
MeshConstraints cons = new MeshConstraints();
EdgeRefineFlags useFlags = EdgeRefineFlags.NoFlip;
foreach (int eid in mesh.EdgeIndices())
{
double fAngle = MeshUtil.OpeningAngleD(mesh, eid);
Index2i ev = mesh.GetEdgeV(eid);
if (fAngle > contraintAngle)
{
cons.SetOrUpdateEdgeConstraint(eid, new EdgeConstraint(useFlags));
// TODO Ids based off of ?? What?
int nSetID0 = (mesh.GetVertex(ev[0]).y > 1) ? 1 : 2;
int nSetID1 = (mesh.GetVertex(ev[1]).y > 1) ? 1 : 2;
cons.SetOrUpdateVertexConstraint(ev[0], new VertexConstraint(true, nSetID0));
cons.SetOrUpdateVertexConstraint(ev[1], new VertexConstraint(true, nSetID1));
}
Vector3d p1 = mesh.GetVertex(ev.a);
Vector3d p2 = mesh.GetVertex(ev.b);
foreach (var v in constrainedLines)
{
if (p1.CompareTo(v.Origin) == 0)
{
Vector3d p = v.PointAt(1.0);
if (p2.CompareTo(p) == 0)
{
cons.SetOrUpdateEdgeConstraint(eid, EdgeConstraint.FullyConstrained);
break;
}
}
}
foreach (var v in constrainedLines)
{
if (p2.CompareTo(v.Origin) == 0)
{
Vector3d p = v.PointAt(1.0);
if (p1.CompareTo(p) == 0)
{
cons.SetOrUpdateEdgeConstraint(eid, EdgeConstraint.FullyConstrained);
break;
}
}
}
}
Remesher r = new Remesher(mesh);
r.SetExternalConstraints(cons);
r.SetProjectionTarget(target);
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = minEdgeLength; //0.1f;
r.MaxEdgeLength = maxEdgeLength; // 0.2f;
r.EnableSmoothing = true;
r.SmoothSpeedT = smoothSpeed; // .5;
for (int k = 0; k < smoothPasses; ++k) // smoothPasses = 20
{
r.BasicRemeshPass();
}
return(mesh);
}
//public static void VoronoiMesh(List<g3.PolyLine3d> mesh, out List<g3.Line3d> listLines, out List<g3.PolyLine3d> listPolylines)
//{
// System.Collections.Generic.SortedDictionary<int, MeshNode> faces = new System.Collections.Generic.SortedDictionary<int, MeshNode>();
// int index = 0;
// foreach (var meshFaceIndex in mesh.TriangleIndices())
// {
// var frame = mesh.GetTriFrame(meshFaceIndex);
// g3.Index3i neighbors = mesh.GetTriNeighbourTris(meshFaceIndex);
// g3.Index3i vertex_index = mesh.GetTriangle(meshFaceIndex);
// faces.Add(meshFaceIndex, new MeshNode(index++, meshFaceIndex, frame, neighbors, vertex_index));
// }
// foreach (var f in faces)
// {
// f.Value.neighbors.Clear();
// f.Value.neighbors.Capacity = 3;
// for (int i = 0; i < 3; ++i)
// {
// int fn = f.Value.neighbors_index[i];
// if (fn >= 0)
// f.Value.neighbors.Add(faces[fn]);
// }
// if (f.Value.neighbors.Count < 3)
// {
// f.Value.locked = true;
// foreach (var n in f.Value.neighbors)
// n.locked = true;
// }
// }
// outputMesh = new g3.DMesh3(g3.MeshComponents.None);
// listLines = new List<g3.Line3d>();
// listPolylines = new List<g3.PolyLine3d>();
// foreach (var f in faces)
// {
// outputMesh.AppendVertex(f.Value.frame.Origin);
// }
// HashSet<int> processedPoints = new HashSet<int>();
// foreach (var f in faces)
// {
// for (int i = 0; i < 3; i++)
// {
// List<int> outputLine = new List<int>();
// if (processedPoints.Contains(f.Value.vertex_index[i]))
// continue;
// int checkVertex = f.Value.vertex_index[i];
// MeshNode currentFaces = f.Value;
// MeshNode prevFace = null;
// bool fullLoop = false;
// while (true)
// {
// for (int j = 0; j < currentFaces.neighbors.Count; j++)
// {
// var neighbor = currentFaces.neighbors[j];
// if (neighbor.UsesVertex(checkVertex))
// {
// if (neighbor == prevFace)
// continue;
// if (neighbor == f.Value)
// {
// fullLoop = true;
// break; // Found full loop
// }
// outputLine.Add(neighbor.index);
// prevFace = currentFaces;
// currentFaces = neighbor;
// j = -1;
// }
// }
// break;
// }
// if (fullLoop)
// {
// processedPoints.Add(checkVertex);
// var polyline = new g3.PolyLine3d();
// if (outputLine.Count > 2)
// {
// g3.Vector3d centerPoint = f.Value.frame.Origin;
// foreach (var p in outputLine)
// centerPoint += outputMesh.GetVertex(p);
// centerPoint /= (outputLine.Count + 1);
// int center = outputMesh.AppendVertex(centerPoint);
// var pS = outputMesh.GetVertex(f.Value.index);
// var p0 = outputMesh.GetVertex(outputLine[0]);
// var pE = outputMesh.GetVertex(outputLine[outputLine.Count - 1]);
// var normal = mesh.GetTriNormal(f.Value.meshIndex);
// polyline.AppendVertex(pS);
// polyline.AppendVertex(p0);
// listLines.Add(new g3.Line3d(pS, p0 - pS));
// var n = MathUtil.Normal(centerPoint, pS, p0);
// bool reverseTri = n.Dot(normal) < 0;
// if (!reverseTri)
// outputMesh.AppendTriangle(center, f.Value.index, outputLine[0]);
// else
// outputMesh.AppendTriangle(center, outputLine[0], f.Value.index);
// for (int j = 0; j < outputLine.Count - 1; j++)
// {
// var p1 = outputMesh.GetVertex(outputLine[j]);
// var p2 = outputMesh.GetVertex(outputLine[j + 1]);
// listLines.Add(new g3.Line3d(p1, p2 - p1));
// polyline.AppendVertex(p2);
// if (!reverseTri)
// outputMesh.AppendTriangle(center, outputLine[j], outputLine[j + 1]);
// else
// outputMesh.AppendTriangle(center, outputLine[j + 1], outputLine[j]);
// }
// polyline.AppendVertex(pS);
// listLines.Add(new g3.Line3d(pE, pS - pE));
// listPolylines.Add(polyline);
// if (!reverseTri)
// outputMesh.AppendTriangle(center, outputLine[outputLine.Count - 1], f.Value.index);
// else
// outputMesh.AppendTriangle(center, f.Value.index, outputLine[outputLine.Count - 1]);
// }
// }
// }
// }
//}
public static void VoronoiMesh(g3.DMesh3 mesh, out g3.DMesh3 outputMesh, out List <g3.Line3d> listLines, out List <g3.PolyLine3d> listPolylines)
{
System.Collections.Generic.SortedDictionary <int, MeshNode> faces = new System.Collections.Generic.SortedDictionary <int, MeshNode>();
int index = 0;
foreach (var meshFaceIndex in mesh.TriangleIndices())
{
var frame = mesh.GetTriFrame(meshFaceIndex);
g3.Index3i neighbors = mesh.GetTriNeighbourTris(meshFaceIndex);
g3.Index3i vertex_index = mesh.GetTriangle(meshFaceIndex);
faces.Add(meshFaceIndex, new MeshNode(index++, meshFaceIndex, frame, neighbors, vertex_index));
}
foreach (var f in faces)
{
f.Value.neighbors.Clear();
f.Value.neighbors.Capacity = 3;
for (int i = 0; i < 3; ++i)
{
int fn = f.Value.neighbors_index[i];
if (fn >= 0)
{
f.Value.neighbors.Add(faces[fn]);
}
}
if (f.Value.neighbors.Count < 3)
{
f.Value.locked = true;
foreach (var n in f.Value.neighbors)
{
n.locked = true;
}
}
}
outputMesh = new g3.DMesh3(g3.MeshComponents.None);
listLines = new List <g3.Line3d>();
listPolylines = new List <g3.PolyLine3d>();
foreach (var f in faces)
{
outputMesh.AppendVertex(f.Value.frame.Origin);
}
HashSet <int> processedPoints = new HashSet <int>();
foreach (var f in faces)
{
for (int i = 0; i < 3; i++)
{
List <int> outputLine = new List <int>();
if (processedPoints.Contains(f.Value.vertex_index[i]))
{
continue;
}
int checkVertex = f.Value.vertex_index[i];
MeshNode currentFaces = f.Value;
MeshNode prevFace = null;
bool fullLoop = false;
while (true)
{
for (int j = 0; j < currentFaces.neighbors.Count; j++)
{
var neighbor = currentFaces.neighbors[j];
if (neighbor.UsesVertex(checkVertex))
{
if (neighbor == prevFace)
{
continue;
}
if (neighbor == f.Value)
{
fullLoop = true;
break; // Found full loop
}
outputLine.Add(neighbor.index);
prevFace = currentFaces;
currentFaces = neighbor;
j = -1;
}
}
break;
}
if (fullLoop)
{
processedPoints.Add(checkVertex);
var polyline = new g3.PolyLine3d();
if (outputLine.Count > 2)
{
g3.Vector3d centerPoint = f.Value.frame.Origin;
foreach (var p in outputLine)
{
centerPoint += outputMesh.GetVertex(p);
}
centerPoint /= (outputLine.Count + 1);
int center = outputMesh.AppendVertex(centerPoint);
var pS = outputMesh.GetVertex(f.Value.index);
var p0 = outputMesh.GetVertex(outputLine[0]);
var pE = outputMesh.GetVertex(outputLine[outputLine.Count - 1]);
var normal = mesh.GetTriNormal(f.Value.meshIndex);
polyline.AppendVertex(pS);
polyline.AppendVertex(p0);
listLines.Add(new g3.Line3d(pS, p0 - pS));
var n = MathUtil.Normal(centerPoint, pS, p0);
bool reverseTri = n.Dot(normal) < 0;
if (!reverseTri)
{
outputMesh.AppendTriangle(center, f.Value.index, outputLine[0]);
}
else
{
outputMesh.AppendTriangle(center, outputLine[0], f.Value.index);
}
for (int j = 0; j < outputLine.Count - 1; j++)
{
var p1 = outputMesh.GetVertex(outputLine[j]);
var p2 = outputMesh.GetVertex(outputLine[j + 1]);
listLines.Add(new g3.Line3d(p1, p2 - p1));
polyline.AppendVertex(p2);
if (!reverseTri)
{
outputMesh.AppendTriangle(center, outputLine[j], outputLine[j + 1]);
}
else
{
outputMesh.AppendTriangle(center, outputLine[j + 1], outputLine[j]);
}
}
polyline.AppendVertex(pS);
listLines.Add(new g3.Line3d(pE, pS - pE));
listPolylines.Add(polyline);
if (!reverseTri)
{
outputMesh.AppendTriangle(center, outputLine[outputLine.Count - 1], f.Value.index);
}
else
{
outputMesh.AppendTriangle(center, f.Value.index, outputLine[outputLine.Count - 1]);
}
}
}
}
}
}
/// <summary>
/// Construct vertex correspondences between fill mesh boundary loop
/// and input mesh boundary loop. In ideal case there is an easy 1-1
/// correspondence. If that is not true, then do a brute-force search
/// to find the best correspondences we can.
///
/// Currently only returns unique correspondences. If any vertex
/// matches with multiple input vertices it is not merged.
/// [TODO] we could do better in many cases...
///
/// Return value is list of indices into fillLoopV that were not merged
/// </summary>
List <int> build_merge_map(DMesh3 fillMesh, int[] fillLoopV,
DMesh3 targetMesh, int[] targetLoopV,
double tol, IndexMap mergeMapV)
{
if (fillLoopV.Length == targetLoopV.Length)
{
if (build_merge_map_simple(fillMesh, fillLoopV, targetMesh, targetLoopV, tol, mergeMapV))
{
return(null);
}
}
int NF = fillLoopV.Length, NT = targetLoopV.Length;
bool[] doneF = new bool[NF], doneT = new bool[NT];
int[] countF = new int[NF], countT = new int[NT];
var errorV = new List <int>();
var matchF = new SmallListSet(); matchF.Resize(NF);
// find correspondences
double tol_sqr = tol * tol;
for (int i = 0; i < NF; ++i)
{
if (fillMesh.IsVertex(fillLoopV[i]) == false)
{
doneF[i] = true;
errorV.Add(i);
continue;
}
matchF.AllocateAt(i);
Vector3d v = fillMesh.GetVertex(fillLoopV[i]);
for (int j = 0; j < NT; ++j)
{
Vector3d v2 = targetMesh.GetVertex(targetLoopV[j]);
if (v.DistanceSquared(ref v2) < tol_sqr)
{
matchF.Insert(i, j);
}
}
}
for (int i = 0; i < NF; ++i)
{
if (doneF[i])
{
continue;
}
if (matchF.Count(i) == 1)
{
int j = matchF.First(i);
mergeMapV[fillLoopV[i]] = targetLoopV[j];
doneF[i] = true;
}
}
for (int i = 0; i < NF; ++i)
{
if (doneF[i] == false)
{
errorV.Add(i);
}
}
return(errorV);
}
/// <summary>
/// Check if this m2 is the same as this mesh. By default only checks
/// vertices and triangles, turn on other parameters w/ flags
/// </summary>
public bool IsSameMesh(DMesh3 m2, bool bCheckConnectivity, bool bCheckEdgeIDs = false,
bool bCheckNormals = false, bool bCheckColors = false, bool bCheckUVs = false,
bool bCheckGroups = false,
float Epsilon = MathUtil.Epsilonf)
{
if (VertexCount != m2.VertexCount)
{
return(false);
}
if (TriangleCount != m2.TriangleCount)
{
return(false);
}
foreach (int vid in VertexIndices())
{
if (m2.IsVertex(vid) == false || GetVertex(vid).EpsilonEqual(m2.GetVertex(vid), Epsilon) == false)
{
return(false);
}
}
foreach (int tid in TriangleIndices())
{
if (m2.IsTriangle(tid) == false || GetTriangle(tid).Equals(m2.GetTriangle(tid)) == false)
{
return(false);
}
}
if (bCheckConnectivity)
{
foreach (int eid in EdgeIndices())
{
Index4i e = GetEdge(eid);
int other_eid = m2.FindEdge(e.a, e.b);
if (other_eid == InvalidID)
{
return(false);
}
Index4i oe = m2.GetEdge(other_eid);
if (Math.Min(e.c, e.d) != Math.Min(oe.c, oe.d) || Math.Max(e.c, e.d) != Math.Max(oe.c, oe.d))
{
return(false);
}
}
}
if (bCheckEdgeIDs)
{
if (EdgeCount != m2.EdgeCount)
{
return(false);
}
foreach (int eid in EdgeIndices())
{
if (m2.IsEdge(eid) == false || GetEdge(eid).Equals(m2.GetEdge(eid)) == false)
{
return(false);
}
}
}
if (bCheckNormals)
{
if (HasVertexNormals != m2.HasVertexNormals)
{
return(false);
}
if (HasVertexNormals)
{
foreach (int vid in VertexIndices())
{
if (GetVertexNormal(vid).EpsilonEqual(m2.GetVertexNormal(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckColors)
{
if (HasVertexColors != m2.HasVertexColors)
{
return(false);
}
if (HasVertexColors)
{
foreach (int vid in VertexIndices())
{
if (GetVertexColor(vid).EpsilonEqual(m2.GetVertexColor(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckUVs)
{
if (HasVertexUVs != m2.HasVertexUVs)
{
return(false);
}
if (HasVertexUVs)
{
foreach (int vid in VertexIndices())
{
if (GetVertexUV(vid).EpsilonEqual(m2.GetVertexUV(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckGroups)
{
if (HasTriangleGroups != m2.HasTriangleGroups)
{
return(false);
}
if (HasTriangleGroups)
{
foreach (int tid in TriangleIndices())
{
if (GetTriangleGroup(tid) != m2.GetTriangleGroup(tid))
{
return(false);
}
}
}
}
return(true);
}
/// <summary>
/// Find the set of boundary EdgeLoops. Note that if we encounter topological
/// issues, we will throw MeshBoundaryLoopsException w/ more info (if possible)
/// </summary>
public bool Compute()
{
// This algorithm assumes that triangles are oriented consistently,
// so closed boundary-loop can be followed by walking edges in-order
Loops = new List <EdgeLoop>();
Spans = new List <EdgeSpan>();
int NE = Mesh.MaxEdgeID;
// Temporary memory used to indicate when we have "used" an edge.
BitArray used_edge = new BitArray(NE);
used_edge.SetAll(false);
// current loop is stored here, cleared after each loop extracted
List <int> loop_edges = new List <int>(); // [RMS] not sure we need this...
List <int> loop_verts = new List <int>();
List <int> bowties = new List <int>();
// Temp buffer for reading back all boundary edges of a vertex.
// probably always small but in pathological cases it could be large...
int[] all_e = new int[16];
// [TODO] might make sense to precompute some things here, like num_be for each bdry vtx?
// process all edges of mesh
for (int eid = 0; eid < NE; ++eid)
{
if (!Mesh.IsEdge(eid))
{
continue;
}
if (used_edge[eid] == true)
{
continue;
}
if (Mesh.IsBoundaryEdge(eid) == false)
{
continue;
}
if (EdgeFilterF != null && EdgeFilterF(eid) == false)
{
used_edge[eid] = true;
continue;
}
// ok this is start of a boundary chain
int eStart = eid;
used_edge[eStart] = true;
loop_edges.Add(eStart);
int eCur = eid;
// follow the chain in order of oriented edges
bool bClosed = false;
bool bIsOpenSpan = false;
while (!bClosed)
{
Index2i ev = Mesh.GetOrientedBoundaryEdgeV(eCur);
int cure_a = ev.a, cure_b = ev.b;
if (bIsOpenSpan)
{
cure_a = ev.b; cure_b = ev.a;
}
else
{
loop_verts.Add(cure_a);
}
int e0 = -1, e1 = 1;
int bdry_nbrs = Mesh.VtxBoundaryEdges(cure_b, ref e0, ref e1);
// have to filter this list, if we are filtering. this is ugly.
if (EdgeFilterF != null)
{
if (bdry_nbrs > 2)
{
if (bdry_nbrs >= all_e.Length)
{
all_e = new int[bdry_nbrs];
}
// we may repreat this below...irritating...
int num_be = Mesh.VtxAllBoundaryEdges(cure_b, all_e);
num_be = BufferUtil.CountValid(all_e, EdgeFilterF, num_be);
}
else
{
if (EdgeFilterF(e0) == false)
{
bdry_nbrs--;
}
if (EdgeFilterF(e1) == false)
{
bdry_nbrs--;
}
}
}
if (bdry_nbrs < 2) // hit an 'endpoint' vertex (should only happen when Filter is on...)
{
if (SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: found open span at vertex " + cure_b)
{
UnclosedLoop = true
}
}
;
if (bIsOpenSpan)
{
bClosed = true;
continue;
}
else
{
bIsOpenSpan = true; // begin open span
eCur = loop_edges[0]; // restart at other end of loop
loop_edges.Reverse(); // do this so we can push to front
continue;
}
}
int eNext = -1;
if (bdry_nbrs > 2)
{
// found "bowtie" vertex...things just got complicated!
if (cure_b == loop_verts[0])
{
// The "end" of the current edge is the same as the start vertex.
// This means we can close the loop here. Might as well!
eNext = -2; // sentinel value used below
}
else
{
// try to find an unused outgoing edge that is oriented properly.
// This could create sub-loops, we will handle those later
if (bdry_nbrs >= all_e.Length)
{
all_e = new int[2 * bdry_nbrs];
}
int num_be = Mesh.VtxAllBoundaryEdges(cure_b, all_e);
Debug.Assert(num_be == bdry_nbrs);
if (EdgeFilterF != null)
{
num_be = BufferUtil.FilterInPlace(all_e, EdgeFilterF, num_be);
}
// Try to pick the best "turn left" vertex.
eNext = find_left_turn_edge(eCur, cure_b, all_e, num_be, used_edge);
if (eNext == -1)
{
if (FailureBehavior == FailureBehaviors.ThrowException || SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: cannot find valid outgoing edge at bowtie vertex " + cure_b)
{
BowtieFailure = true
}
}
;
// ok, we are stuck. all we can do now is terminate this loop and keep it as a span
if (bIsOpenSpan)
{
bClosed = true;
}
else
{
bIsOpenSpan = true;
bClosed = true;
}
continue;
}
}
if (bowties.Contains(cure_b) == false)
{
bowties.Add(cure_b);
}
}
else
{
// walk forward to next available edge
Debug.Assert(e0 == eCur || e1 == eCur);
eNext = (e0 == eCur) ? e1 : e0;
}
if (eNext == -2)
{
// found a bowtie vert that is the same as start-of-loop, so we
// are just closing it off explicitly
bClosed = true;
}
else if (eNext == eStart)
{
// found edge at start of loop, so loop is done.
bClosed = true;
}
else if (used_edge[eNext] != false)
{
// disaster case - the next edge is already used, but it is not the start of our loop
// All we can do is convert to open span and terminate
if (FailureBehavior == FailureBehaviors.ThrowException || SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: encountered repeated edge " + eNext)
{
RepeatedEdge = true
}
}
;
bIsOpenSpan = true;
bClosed = true;
}
else
{
// push onto accumulated list
Debug.Assert(used_edge[eNext] == false);
loop_edges.Add(eNext);
used_edge[eNext] = true;
eCur = eNext;
}
}
if (bIsOpenSpan)
{
SawOpenSpans = true;
if (SpanBehavior == SpanBehaviors.Compute)
{
loop_edges.Reverse(); // orient properly
EdgeSpan span = EdgeSpan.FromEdges(Mesh, loop_edges);
Spans.Add(span);
}
}
else if (bowties.Count > 0)
{
// if we saw a bowtie vertex, we might need to break up this loop,
// so call extract_subloops
List <EdgeLoop> subloops = extract_subloops(loop_verts, loop_edges, bowties);
for (int i = 0; i < subloops.Count; ++i)
{
Loops.Add(subloops[i]);
}
}
else
{
// clean simple loop, convert to EdgeLoop instance
EdgeLoop loop = new EdgeLoop(Mesh);
loop.Vertices = loop_verts.ToArray();
loop.Edges = loop_edges.ToArray();
Loops.Add(loop);
}
// reset these lists
loop_edges.Clear();
loop_verts.Clear();
bowties.Clear();
}
return(true);
}
// [TODO] cache this in a dictionary? we will not need very many, but we will
// need each multiple times!
Vector3d get_vtx_normal(int vid)
{
Vector3d n = Vector3d.Zero;
foreach (int ti in Mesh.VtxTrianglesItr(vid))
{
n += Mesh.GetTriNormal(ti);
}
n.Normalize();
return(n);
}
// ok, bdry_edges[0...bdry_edges_count] contains the boundary edges coming out of bowtie_v.
// We want to pick the best one to continue the loop that came in to bowtie_v on incoming_e.
// If the loops are all sane, then we will get the smallest loops by "turning left" at bowtie_v.
// So, we compute the tangent plane at bowtie_v, and then the signed angle for each
// viable edge in this plane.
//
// [TODO] handle degenerate edges. what do we do then? Currently will only chose
// degenerate edge if there are no other options (I think...)
int find_left_turn_edge(int incoming_e, int bowtie_v, int[] bdry_edges, int bdry_edges_count, BitArray used_edges)
{
// compute normal and edge [a,bowtie]
Vector3d n = get_vtx_normal(bowtie_v);
int other_v = Mesh.edge_other_v(incoming_e, bowtie_v);
Vector3d ab = Mesh.GetVertex(bowtie_v) - Mesh.GetVertex(other_v);
// our winner
int best_e = -1;
double best_angle = double.MaxValue;
for (int i = 0; i < bdry_edges_count; ++i)
{
int bdry_eid = bdry_edges[i];
if (used_edges[bdry_eid] == true)
{
continue; // this edge is already used
}
Index2i bdry_ev = Mesh.GetOrientedBoundaryEdgeV(bdry_eid);
if (bdry_ev.a != bowtie_v)
{
continue; // have to be able to chain to end of current edge, orientation-wise
}
// compute projected angle
Vector3d bc = Mesh.GetVertex(bdry_ev.b) - Mesh.GetVertex(bowtie_v);
float fAngleS = MathUtil.PlaneAngleSignedD((Vector3f)ab, (Vector3f)bc, (Vector3f)n);
// turn left!
if (best_angle == double.MaxValue || fAngleS < best_angle)
{
best_angle = fAngleS;
best_e = bdry_eid;
}
}
// [RMS] w/ bowtie vertices and open spans, this does happen
//Debug.Assert(best_e != -1);
return(best_e);
}
// This is called when loopV contains one or more "bowtie" vertices.
// These vertices *might* be duplicated in loopV (but not necessarily)
// If they are, we have to break loopV into subloops that don't contain duplicates.
//
// The list bowties contains all the possible duplicates
// (all v in bowties occur in loopV at least once)
//
// Currently loopE is not used, and the returned EdgeLoop objects do not have their Edges
// arrays initialized. Perhaps to improve in future.
List <EdgeLoop> extract_subloops(List <int> loopV, List <int> loopE, List <int> bowties)
{
List <EdgeLoop> subs = new List <EdgeLoop>();
// figure out which bowties we saw are actually duplicated in loopV
List <int> dupes = new List <int>();
foreach (int bv in bowties)
{
if (count_in_list(loopV, bv) > 1)
{
dupes.Add(bv);
}
}
// we might not actually have any duplicates, if we got luck. Early out in that case
if (dupes.Count == 0)
{
subs.Add(new EdgeLoop(Mesh)
{
Vertices = loopV.ToArray(), Edges = loopE.ToArray(), BowtieVertices = bowties.ToArray()
});
return(subs);
}
// This loop extracts subloops until we have dealt with all the
// duplicate vertices in loopV
while (dupes.Count > 0)
{
// Find shortest "simple" loop, ie a loop from a bowtie to itself that
// does not contain any other bowties. This is an independent loop.
// We're doing a lot of extra work here if we only have one element in dupes...
int bi = 0, bv = 0;
int start_i = -1, end_i = -1;
int bv_shortest = -1; int shortest = int.MaxValue;
for ( ; bi < dupes.Count; ++bi)
{
bv = dupes[bi];
if (is_simple_bowtie_loop(loopV, dupes, bv, out start_i, out end_i))
{
int len = count_span(loopV, start_i, end_i);
if (len < shortest)
{
bv_shortest = bv;
shortest = len;
}
}
}
if (bv_shortest == -1)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: Cannot find a valid simple loop");
}
if (bv != bv_shortest)
{
bv = bv_shortest;
// running again just to get start_i and end_i...
is_simple_bowtie_loop(loopV, dupes, bv, out start_i, out end_i);
}
Debug.Assert(loopV[start_i] == bv && loopV[end_i] == bv);
EdgeLoop loop = new EdgeLoop(Mesh);
loop.Vertices = extract_span(loopV, start_i, end_i, true);
loop.Edges = EdgeLoop.VertexLoopToEdgeLoop(Mesh, loop.Vertices);
loop.BowtieVertices = bowties.ToArray();
subs.Add(loop);
// If there are no more duplicates of this bowtie, we can treat
// it like a regular vertex now
if (count_in_list(loopV, bv) < 2)
{
dupes.Remove(bv);
}
}
// Should have one loop left that contains duplicates.
// Extract this as a separate loop
int nLeft = 0;
for (int i = 0; i < loopV.Count; ++i)
{
if (loopV[i] != -1)
{
nLeft++;
}
}
if (nLeft > 0)
{
EdgeLoop loop = new EdgeLoop(Mesh);
loop.Vertices = new int[nLeft];
int vi = 0;
for (int i = 0; i < loopV.Count; ++i)
{
if (loopV[i] != -1)
{
loop.Vertices[vi++] = loopV[i];
}
}
loop.Edges = EdgeLoop.VertexLoopToEdgeLoop(Mesh, loop.Vertices);
loop.BowtieVertices = bowties.ToArray();
subs.Add(loop);
}
return(subs);
}
/*
* In all the functions below, the list loopV is assumed to possibly
* contain "removed" vertices indicated by -1. These are ignored.
*/
// Check if the loop from bowtieV to bowtieV inside loopV contains any other bowtie verts.
// Also returns start and end indices in loopV of "clean" loop
// Note that start may be < end, if the "clean" loop wraps around the end
bool is_simple_bowtie_loop(List <int> loopV, List <int> bowties, int bowtieV, out int start_i, out int end_i)
{
// find two indices of bowtie vert
start_i = find_index(loopV, 0, bowtieV);
end_i = find_index(loopV, start_i + 1, bowtieV);
if (is_simple_path(loopV, bowties, bowtieV, start_i, end_i))
{
return(true);
}
else if (is_simple_path(loopV, bowties, bowtieV, end_i, start_i))
{
int tmp = start_i; start_i = end_i; end_i = tmp;
return(true);
}
else
{
return(false); // not a simple bowtie loop!
}
}
// check if forward path from loopV[i1] to loopV[i2] contains any bowtie verts other than bowtieV
bool is_simple_path(List <int> loopV, List <int> bowties, int bowtieV, int i1, int i2)
{
int N = loopV.Count;
for (int i = i1; i != i2; i = (i + 1) % N)
{
int vi = loopV[i];
if (vi == -1)
{
continue; // skip removed vertices
}
if (vi != bowtieV && bowties.Contains(vi))
{
return(false);
}
}
return(true);
}
// Read out the span from loop[i0] to loop [i1-1] into an array.
// If bMarkInvalid, then these values are set to -1 in loop
int[] extract_span(List <int> loop, int i0, int i1, bool bMarkInvalid)
{
int num = count_span(loop, i0, i1);
int[] a = new int[num];
int ai = 0;
int N = loop.Count;
for (int i = i0; i != i1; i = (i + 1) % N)
{
if (loop[i] != -1)
{
a[ai++] = loop[i];
if (bMarkInvalid)
{
loop[i] = -1;
}
}
}
return(a);
}
// count number of valid vertices in l between loop[i0] and loop[i1-1]
int count_span(List <int> l, int i0, int i1)
{
int c = 0;
int N = l.Count;
for (int i = i0; i != i1; i = (i + 1) % N)
{
if (l[i] != -1)
{
c++;
}
}
return(c);
}
// find the index of item in loop, starting at start index
int find_index(List <int> loop, int start, int item)
{
for (int i = start; i < loop.Count; ++i)
{
if (loop[i] == item)
{
return(i);
}
}
return(-1);
}
// count number of times item appears in loop
int count_in_list(List <int> loop, int item)
{
int c = 0;
for (int i = 0; i < loop.Count; ++i)
{
if (loop[i] == item)
{
c++;
}
}
return(c);
}
}
}
public virtual bool Fill(int group_id = -1)
{
if (Loop.Vertices.Length < 3)
{
return(false);
}
// this just needs one triangle
if (Loop.Vertices.Length == 3)
{
var tri = new Index3i(Loop.Vertices[0], Loop.Vertices[2], Loop.Vertices[1]);
int new_tid = Mesh.AppendTriangle(tri, group_id);
if (new_tid < 0)
{
return(false);
}
NewTriangles = new int[1] {
new_tid
};
NewVertex = DMesh3.InvalidID;
return(true);
}
// [TODO] 4-case? could check nbr normals to figure out best internal edge...
// compute centroid
Vector3d c = Vector3d.Zero;
for (int i = 0; i < Loop.Vertices.Length; ++i)
{
c += Mesh.GetVertex(Loop.Vertices[i]);
}
c *= 1.0 / Loop.Vertices.Length;
// add centroid vtx
NewVertex = Mesh.AppendVertex(c);
// stitch triangles
var editor = new MeshEditor(Mesh);
try
{
NewTriangles = editor.AddTriangleFan_OrderedVertexLoop(NewVertex, Loop.Vertices, group_id);
}
catch
{
NewTriangles = null;
}
// if fill failed, back out vertex-add
if (NewTriangles == null)
{
Mesh.RemoveVertex(NewVertex, true, false);
NewVertex = DMesh3.InvalidID;
return(false);
}
else
{
return(true);
}
}
public bool Fill()
{
compute_polygons();
// translate/scale fill loops to unit box. This will improve
// accuracy in the calcs below...
Vector2d shiftOrigin = Bounds.Center;
double scale = 1.0 / Bounds.MaxDim;
foreach (var floop in Loops)
{
floop.poly.Translate(-shiftOrigin);
floop.poly.Scale(scale * Vector2d.One, Vector2d.Zero);
}
Dictionary <PlanarComplex.Element, int> ElemToLoopMap = new Dictionary <PlanarComplex.Element, int>();
// [TODO] if we have multiple components in input mesh, we could do this per-component.
// This also helps avoid nested shells creating holes.
// *However*, we shouldn't *have* to because FindSolidRegions will do the right thing if
// the polygons have the same orientation
// add all loops to planar complex
PlanarComplex complex = new PlanarComplex();
for (int i = 0; i < Loops.Count; ++i)
{
var elem = complex.Add(Loops[i].poly);
ElemToLoopMap[elem] = i;
}
// sort into separate 2d solids
PlanarComplex.SolidRegionInfo solids =
complex.FindSolidRegions(PlanarComplex.FindSolidsOptions.SortPolygons);
// fill each 2d solid
List <Index2i> failed_inserts = new List <Index2i>();
List <Index2i> failed_merges = new List <Index2i>();
for (int fi = 0; fi < solids.Polygons.Count; ++fi)
{
var gpoly = solids.Polygons[fi];
PlanarComplex.GeneralSolid gsolid = solids.PolygonsSources[fi];
// [TODO] could do scale/translate here, per-polygon would be more precise
// generate planar mesh that we will insert polygons into
MeshGenerator meshgen;
float planeW = 1.5f;
int nDivisions = 0;
if (FillTargetEdgeLen < double.MaxValue && FillTargetEdgeLen > 0)
{
int n = (int)((planeW / (float)scale) / FillTargetEdgeLen) + 1;
nDivisions = (n <= 1) ? 0 : n;
}
if (nDivisions == 0)
{
meshgen = new TrivialRectGenerator()
{
IndicesMap = new Index2i(1, 2), Width = planeW, Height = planeW,
};
}
else
{
meshgen = new GriddedRectGenerator()
{
IndicesMap = new Index2i(1, 2), Width = planeW, Height = planeW,
EdgeVertices = nDivisions
};
}
DMesh3 FillMesh = meshgen.Generate().MakeDMesh();
FillMesh.ReverseOrientation(); // why?!?
// convenient list
List <Polygon2d> polys = new List <Polygon2d>()
{
gpoly.Outer
};
polys.AddRange(gpoly.Holes);
// for each poly, we track the set of vertices inserted into mesh
int[][] polyVertices = new int[polys.Count][];
// insert each poly
for (int pi = 0; pi < polys.Count; ++pi)
{
MeshInsertUVPolyCurve insert = new MeshInsertUVPolyCurve(FillMesh, polys[pi]);
ValidationStatus status = insert.Validate(MathUtil.ZeroTolerancef * scale);
bool failed = true;
if (status == ValidationStatus.Ok)
{
if (insert.Apply())
{
insert.Simplify();
polyVertices[pi] = insert.CurveVertices;
failed = (insert.Loops.Count != 1) ||
(insert.Loops[0].VertexCount != polys[pi].VertexCount);
}
}
if (failed)
{
failed_inserts.Add(new Index2i(fi, pi));
}
}
// remove any triangles not contained in gpoly
// [TODO] degenerate triangle handling? may be 'on' edge of gpoly...
List <int> removeT = new List <int>();
foreach (int tid in FillMesh.TriangleIndices())
{
Vector3d v = FillMesh.GetTriCentroid(tid);
if (gpoly.Contains(v.xy) == false)
{
removeT.Add(tid);
}
}
foreach (int tid in removeT)
{
FillMesh.RemoveTriangle(tid, true, false);
}
//Util.WriteDebugMesh(FillMesh, "c:\\scratch\\CLIPPED_MESH.obj");
// transform fill mesh back to 3d
MeshTransforms.PerVertexTransform(FillMesh, (v) => {
Vector2d v2 = v.xy;
v2 /= scale;
v2 += shiftOrigin;
return(to3D(v2));
});
//Util.WriteDebugMesh(FillMesh, "c:\\scratch\\PLANAR_MESH_WITH_LOOPS.obj");
//Util.WriteDebugMesh(MeshEditor.Combine(FillMesh, Mesh), "c:\\scratch\\FILLED_MESH.obj");
// figure out map between new mesh and original edge loops
// [TODO] if # of verts is different, we can still find correspondence, it is just harder
// [TODO] should check that edges (ie sequential verts) are boundary edges on fill mesh
// if not, can try to delete nbr tris to repair
IndexMap mergeMapV = new IndexMap(true);
if (MergeFillBoundary)
{
for (int pi = 0; pi < polys.Count; ++pi)
{
if (polyVertices[pi] == null)
{
continue;
}
int[] fillLoopVerts = polyVertices[pi];
int NV = fillLoopVerts.Length;
PlanarComplex.Element sourceElem = (pi == 0) ? gsolid.Outer : gsolid.Holes[pi - 1];
int loopi = ElemToLoopMap[sourceElem];
EdgeLoop sourceLoop = Loops[loopi].edgeLoop;
if (sourceLoop.VertexCount != NV)
{
failed_merges.Add(new Index2i(fi, pi));
continue;
}
for (int k = 0; k < NV; ++k)
{
Vector3d fillV = FillMesh.GetVertex(fillLoopVerts[k]);
Vector3d sourceV = Mesh.GetVertex(sourceLoop.Vertices[k]);
if (fillV.Distance(sourceV) < MathUtil.ZeroTolerancef)
{
mergeMapV[fillLoopVerts[k]] = sourceLoop.Vertices[k];
}
}
}
}
// append this fill to input mesh
MeshEditor editor = new MeshEditor(Mesh);
int[] mapV;
editor.AppendMesh(FillMesh, mergeMapV, out mapV, Mesh.AllocateTriangleGroup());
// [TODO] should verify that we actually merged the loops...
}
if (failed_inserts.Count > 0 || failed_merges.Count > 0)
{
return(false);
}
return(true);
}
void make_level_set3(DMesh3 mesh, /*const std::vector<Vec3ui> &tri, const std::vector<Vec3f> &x*/
Vector3f origin, float dx,
int ni, int nj, int nk,
DenseGrid3f phi, int exact_band)
{
phi.resize(ni, nj, nk);
phi.assign((ni + nj + nk) * dx); // upper bound on distance
DenseGrid3i closest_tri = new DenseGrid3i(ni, nj, nk, -1);
DenseGrid3i intersection_count = new DenseGrid3i(ni, nj, nk, 0); // intersection_count(i,j,k) is # of tri intersections in (i-1,i]x{j}x{k}
// we begin by initializing distances near the mesh, and figuring out intersection counts
System.Console.WriteLine("start");
//Vector3f ijkmin, ijkmax; // [RMS] unused in original code
double ddx = (double)dx;
double ox = (double)origin[0], oy = (double)origin[1], oz = (double)origin[2];
foreach (int t in mesh.TriangleIndices())
{
Index3i triangle = mesh.GetTriangle(t);
int p = triangle.a, q = triangle.b, r = triangle.c;
Vector3d xp = mesh.GetVertex(p);
Vector3d xq = mesh.GetVertex(q);
Vector3d xr = mesh.GetVertex(r);
// coordinates in grid to high precision
double fip = (xp[0] - ox) / ddx, fjp = (xp[1] - oy) / ddx, fkp = (xp[2] - oz) / ddx;
double fiq = (xq[0] - ox) / ddx, fjq = (xq[1] - oy) / ddx, fkq = (xq[2] - oz) / ddx;
double fir = (xr[0] - ox) / ddx, fjr = (xr[1] - oy) / ddx, fkr = (xr[2] - oz) / ddx;
// do distances nearby
int i0 = MathUtil.Clamp(((int)MathUtil.Min(fip, fiq, fir)) - exact_band, 0, ni - 1);
int i1 = MathUtil.Clamp(((int)MathUtil.Max(fip, fiq, fir)) + exact_band + 1, 0, ni - 1);
int j0 = MathUtil.Clamp(((int)MathUtil.Min(fjp, fjq, fjr)) - exact_band, 0, nj - 1);
int j1 = MathUtil.Clamp(((int)MathUtil.Max(fjp, fjq, fjr)) + exact_band + 1, 0, nj - 1);
int k0 = MathUtil.Clamp(((int)MathUtil.Min(fkp, fkq, fkr)) - exact_band, 0, nk - 1);
int k1 = MathUtil.Clamp(((int)MathUtil.Max(fkp, fkq, fkr)) + exact_band + 1, 0, nk - 1);
for (int k = k0; k <= k1; ++k)
{
for (int j = j0; j <= j1; ++j)
{
for (int i = i0; i <= i1; ++i)
{
Vector3f gx = new Vector3f((float)i * dx + origin[0], (float)j * dx + origin[1], (float)k * dx + origin[2]);
float d = point_triangle_distance(gx, (Vector3f)xp, (Vector3f)xq, (Vector3f)xr);
if (d < phi[i, j, k])
{
phi[i, j, k] = d;
closest_tri[i, j, k] = t;
}
}
}
}
// and do intersection counts
j0 = MathUtil.Clamp((int)Math.Ceiling(MathUtil.Min(fjp, fjq, fjr)), 0, nj - 1);
j1 = MathUtil.Clamp((int)Math.Floor(MathUtil.Max(fjp, fjq, fjr)), 0, nj - 1);
k0 = MathUtil.Clamp((int)Math.Ceiling(MathUtil.Min(fkp, fkq, fkr)), 0, nk - 1);
k1 = MathUtil.Clamp((int)Math.Floor(MathUtil.Max(fkp, fkq, fkr)), 0, nk - 1);
for (int k = k0; k <= k1; ++k)
{
for (int j = j0; j <= j1; ++j)
{
double a, b, c;
if (point_in_triangle_2d(j, k, fjp, fkp, fjq, fkq, fjr, fkr, out a, out b, out c))
{
double fi = a * fip + b * fiq + c * fir; // intersection i coordinate
int i_interval = (int)(Math.Ceiling(fi)); // intersection is in (i_interval-1,i_interval]
if (i_interval < 0)
{
intersection_count.increment(0, j, k); // we enlarge the first interval to include everything to the -x direction
}
else if (i_interval < ni)
{
intersection_count.increment(i_interval, j, k);
}
// we ignore intersections that are beyond the +x side of the grid
}
}
}
}
System.Console.WriteLine("done narrow-band");
// and now we fill in the rest of the distances with fast sweeping
for (int pass = 0; pass < 2; ++pass)
{
sweep(mesh, phi, closest_tri, origin, dx, +1, +1, +1);
sweep(mesh, phi, closest_tri, origin, dx, -1, -1, -1);
sweep(mesh, phi, closest_tri, origin, dx, +1, +1, -1);
sweep(mesh, phi, closest_tri, origin, dx, -1, -1, +1);
sweep(mesh, phi, closest_tri, origin, dx, +1, -1, +1);
sweep(mesh, phi, closest_tri, origin, dx, -1, +1, -1);
sweep(mesh, phi, closest_tri, origin, dx, +1, -1, -1);
sweep(mesh, phi, closest_tri, origin, dx, -1, +1, +1);
}
System.Console.WriteLine("done sweeping");
// then figure out signs (inside/outside) from intersection counts
for (int k = 0; k < nk; ++k)
{
for (int j = 0; j < nj; ++j)
{
int total_count = 0;
for (int i = 0; i < ni; ++i)
{
total_count += intersection_count[i, j, k];
if (total_count % 2 == 1) // if parity of intersections so far is odd,
{
phi[i, j, k] = -phi[i, j, k]; // we are inside the mesh
}
}
}
}
System.Console.WriteLine("done signs");
} // end make_level_set_3
public void Initialize()
{
ToMeshV = new int[Mesh.MaxVertexID];
ToIndex = new int[Mesh.MaxVertexID];
N = 0;
foreach (int vid in Mesh.VertexIndices())
{
ToMeshV[N] = vid;
ToIndex[vid] = N;
N++;
}
Px = new double[N];
Py = new double[N];
Pz = new double[N];
nbr_counts = new int[N];
SymmetricSparseMatrix M = new SymmetricSparseMatrix();
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
Vector3d v = Mesh.GetVertex(vid);
Px[i] = v.x; Py[i] = v.y; Pz[i] = v.z;
nbr_counts[i] = Mesh.GetVtxEdgeCount(vid);
}
// construct laplacian matrix
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
int n = nbr_counts[i];
double sum_w = 0;
foreach (int nbrvid in Mesh.VtxVerticesItr(vid))
{
int j = ToIndex[nbrvid];
int n2 = nbr_counts[j];
// weight options
//double w = -1;
double w = -1.0 / Math.Sqrt(n + n2);
//double w = -1.0 / n;
M.Set(i, j, w);
sum_w += w;
}
sum_w = -sum_w;
// TODO: Investigate: is this ia bug?
// Source https://github.com/ZelimDamian/geometry3Sharp/commit/7a50d8de10faad762e726e60956acc4bdc5456b5
// makes the following line M.Set(i, i, sum_w);
M.Set(vid, vid, sum_w);
}
// transpose(L) * L, but matrix is symmetric...
if (UseSoftConstraintNormalEquations)
{
//M = M.Multiply(M);
// only works if M is symmetric!!
PackedM = M.SquarePackedParallel();
}
else
{
PackedM = new PackedSparseMatrix(M);
}
// compute laplacian vectors of initial mesh positions
MLx = new double[N];
MLy = new double[N];
MLz = new double[N];
PackedM.Multiply(Px, MLx);
PackedM.Multiply(Py, MLy);
PackedM.Multiply(Pz, MLz);
// allocate memory for internal buffers
Preconditioner = new DiagonalMatrix(N);
WeightsM = new DiagonalMatrix(N);
Cx = new double[N]; Cy = new double[N]; Cz = new double[N];
Bx = new double[N]; By = new double[N]; Bz = new double[N];
Sx = new double[N]; Sy = new double[N]; Sz = new double[N];
need_solve_update = true;
UpdateForSolve();
}
// Walk along edge loop and collapse to inserted curve vertices.
EdgeLoop simplify(EdgeLoop loop)
{
HashSet <int> curve_verts = new HashSet <int>(CurveVertices);
List <int> remaining_edges = new List <int>();
for (int li = 0; li < loop.EdgeCount; ++li)
{
int eid = loop.Edges[li];
Index2i ev = Mesh.GetEdgeV(eid);
// cannot collapse edge between two "original" polygon verts (ie created by face pokes)
if (curve_verts.Contains(ev.a) && curve_verts.Contains(ev.b))
{
remaining_edges.Add(eid);
continue;
}
// if we have an original vert, we need to keep it (and its position!)
int keep = ev.a, discard = ev.b;
Vector3d set_to = Vector3d.Zero;
if (curve_verts.Contains(ev.b))
{
keep = ev.b;
discard = ev.a;
set_to = Mesh.GetVertex(ev.b);
}
else if (curve_verts.Contains(ev.a))
{
set_to = Mesh.GetVertex(ev.a);
}
else
{
set_to = 0.5 * (Mesh.GetVertex(ev.a) + Mesh.GetVertex(ev.b));
}
// make sure we are not going to flip any normals
// [OPTIMIZATION] May be possible to do this more efficiently because we know we are in
// 2D and each tri should have same cw/ccw orientation. But we don't quite "know" we
// are in 2D here, as CollapseEdge function is operating on the mesh coordinates...
if (MeshUtil.CheckIfCollapseCreatesFlip(Mesh, eid, set_to))
{
remaining_edges.Add(eid);
continue;
}
// cannot collapse if the 'other' edges we would discard are OnCutEdges. This would
// result in loop potentially being broken. bad!
Index4i einfo = Mesh.GetEdge(eid);
int c = IndexUtil.find_tri_other_vtx(keep, discard, Mesh.GetTriangle(einfo.c));
int d = IndexUtil.find_tri_other_vtx(keep, discard, Mesh.GetTriangle(einfo.d));
int ec = Mesh.FindEdge(discard, c);
int ed = Mesh.FindEdge(discard, d);
if (OnCutEdges.Contains(ec) || OnCutEdges.Contains(ed))
{
remaining_edges.Add(eid);
continue;
}
// do collapse and update internal data structures
DMesh3.EdgeCollapseInfo collapse;
MeshResult result = Mesh.CollapseEdge(keep, discard, out collapse);
if (result == MeshResult.Ok)
{
Mesh.SetVertex(collapse.vKept, set_to);
OnCutEdges.Remove(collapse.eCollapsed);
}
else
{
remaining_edges.Add(eid);
}
}
return(EdgeLoop.FromEdges(Mesh, remaining_edges));
}
public void Initialize()
{
ToMeshV = new int[Mesh.MaxVertexID];
ToIndex = new int[Mesh.MaxVertexID];
N = 0;
foreach (int vid in Mesh.VertexIndices())
{
ToMeshV[N] = vid;
ToIndex[vid] = N;
N++;
}
Px = new double[N];
Py = new double[N];
Pz = new double[N];
nbr_counts = new int[N];
SymmetricSparseMatrix M = new SymmetricSparseMatrix();
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
Vector3d v = Mesh.GetVertex(vid);
Px[i] = v.x; Py[i] = v.y; Pz[i] = v.z;
nbr_counts[i] = Mesh.GetVtxEdgeCount(vid);
}
// construct laplacian matrix
for (int i = 0; i < N; ++i)
{
int vid = ToMeshV[i];
int n = nbr_counts[i];
double sum_w = 0;
foreach (int nbrvid in Mesh.VtxVerticesItr(vid))
{
int j = ToIndex[nbrvid];
int n2 = nbr_counts[j];
// weight options
//double w = -1;
double w = -1.0 / Math.Sqrt(n + n2);
//double w = -1.0 / n;
M.Set(i, j, w);
sum_w += w;
}
sum_w = -sum_w;
M.Set(vid, vid, sum_w);
}
// transpose(L) * L, but matrix is symmetric...
if (UseSoftConstraintNormalEquations)
{
//M = M.Multiply(M);
// only works if M is symmetric!!
PackedM = M.SquarePackedParallel();
}
else
{
PackedM = new PackedSparseMatrix(M);
}
// compute laplacian vectors of initial mesh positions
MLx = new double[N];
MLy = new double[N];
MLz = new double[N];
PackedM.Multiply(Px, MLx);
PackedM.Multiply(Py, MLy);
PackedM.Multiply(Pz, MLz);
// zero out...this is the smoothing bit!
for (int i = 0; i < Px.Length; ++i)
{
MLx[i] = 0;
MLy[i] = 0;
MLz[i] = 0;
}
// allocate memory for internal buffers
Preconditioner = new DiagonalMatrix(N);
WeightsM = new DiagonalMatrix(N);
Cx = new double[N]; Cy = new double[N]; Cz = new double[N];
Bx = new double[N]; By = new double[N]; Bz = new double[N];
Sx = new double[N]; Sy = new double[N]; Sz = new double[N];
need_solve_update = true;
UpdateForSolve();
}
/// <summary>
/// Check if this m2 is the same as this mesh. By default only checks
/// vertices and triangles, turn on other parameters w/ flags
/// </summary>
public bool IsSameMesh(DMesh3 m2, bool bCheckEdges = false,
bool bCheckNormals = false, bool bCheckColors = false, bool bCheckUVs = false,
bool bCheckGroups = false,
float Epsilon = MathUtil.Epsilonf)
{
if (VertexCount != m2.VertexCount)
{
return(false);
}
if (TriangleCount != m2.TriangleCount)
{
return(false);
}
foreach (int vid in VertexIndices())
{
if (m2.IsVertex(vid) == false || GetVertex(vid).EpsilonEqual(m2.GetVertex(vid), Epsilon) == false)
{
return(false);
}
}
foreach (int tid in TriangleIndices())
{
if (m2.IsTriangle(tid) == false || GetTriangle(tid).Equals(m2.GetTriangle(tid)) == false)
{
return(false);
}
}
if (bCheckEdges)
{
if (EdgeCount != m2.EdgeCount)
{
return(false);
}
foreach (int eid in EdgeIndices())
{
if (m2.IsEdge(eid) == false || GetEdge(eid).Equals(m2.GetEdge(eid)) == false)
{
return(false);
}
}
}
if (bCheckNormals)
{
if (HasVertexNormals != m2.HasVertexNormals)
{
return(false);
}
if (HasVertexNormals)
{
foreach (int vid in VertexIndices())
{
if (GetVertexNormal(vid).EpsilonEqual(m2.GetVertexNormal(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckColors)
{
if (HasVertexColors != m2.HasVertexColors)
{
return(false);
}
if (HasVertexColors)
{
foreach (int vid in VertexIndices())
{
if (GetVertexColor(vid).EpsilonEqual(m2.GetVertexColor(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckUVs)
{
if (HasVertexUVs != m2.HasVertexUVs)
{
return(false);
}
if (HasVertexUVs)
{
foreach (int vid in VertexIndices())
{
if (GetVertexUV(vid).EpsilonEqual(m2.GetVertexUV(vid), Epsilon) == false)
{
return(false);
}
}
}
}
if (bCheckGroups)
{
if (HasTriangleGroups != m2.HasTriangleGroups)
{
return(false);
}
if (HasTriangleGroups)
{
foreach (int tid in TriangleIndices())
{
if (GetTriangleGroup(tid) != m2.GetTriangleGroup(tid))
{
return(false);
}
}
}
}
return(true);
}
/// <summary>
/// Find the set of boundary EdgeLoops. Note that if we encounter topological
/// issues, we will throw MeshBoundaryLoopsException w/ more info (if possible)
/// </summary>
public bool Compute()
{
// This algorithm assumes that triangles are oriented consistently,
// so closed boundary-loop can be followed by walking edges in-order
Loops = new List <EdgeLoop>();
Spans = new List <EdgeSpan>();
// early-out if we don't actually have boundaries
if (Mesh.CachedIsClosed)
{
return(true);
}
int NE = Mesh.MaxEdgeID;
// Temporary memory used to indicate when we have "used" an edge.
BitArray used_edge = new BitArray(NE);
used_edge.SetAll(false);
// current loop is stored here, cleared after each loop extracted
List <int> loop_edges = new List <int>(); // [RMS] not sure we need this...
List <int> loop_verts = new List <int>();
List <int> bowties = new List <int>();
// Temp buffer for reading back all boundary edges of a vertex.
// probably always small but in pathological cases it could be large...
int[] all_e = new int[16];
// [TODO] might make sense to precompute some things here, like num_be for each bdry vtx?
// process all edges of mesh
for (int eid = 0; eid < NE; ++eid)
{
if (!Mesh.IsEdge(eid))
{
continue;
}
if (used_edge[eid] == true)
{
continue;
}
if (Mesh.IsBoundaryEdge(eid) == false)
{
continue;
}
if (EdgeFilterF != null && EdgeFilterF(eid) == false)
{
used_edge[eid] = true;
continue;
}
// ok this is start of a boundary chain
int eStart = eid;
used_edge[eStart] = true;
loop_edges.Add(eStart);
int eCur = eid;
// follow the chain in order of oriented edges
bool bClosed = false;
bool bIsOpenSpan = false;
while (!bClosed)
{
Index2i ev = Mesh.GetOrientedBoundaryEdgeV(eCur);
int cure_a = ev.a, cure_b = ev.b;
if (bIsOpenSpan)
{
cure_a = ev.b; cure_b = ev.a;
}
else
{
loop_verts.Add(cure_a);
}
int e0 = -1, e1 = 1;
int bdry_nbrs = Mesh.VtxBoundaryEdges(cure_b, ref e0, ref e1);
// have to filter this list, if we are filtering. this is ugly.
if (EdgeFilterF != null)
{
if (bdry_nbrs > 2)
{
if (bdry_nbrs >= all_e.Length)
{
all_e = new int[bdry_nbrs];
}
// we may repreat this below...irritating...
int num_be = Mesh.VtxAllBoundaryEdges(cure_b, all_e);
num_be = BufferUtil.CountValid(all_e, EdgeFilterF, num_be);
}
else
{
if (EdgeFilterF(e0) == false)
{
bdry_nbrs--;
}
if (EdgeFilterF(e1) == false)
{
bdry_nbrs--;
}
}
}
if (bdry_nbrs < 2) // hit an 'endpoint' vertex (should only happen when Filter is on...)
{
if (SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: found open span at vertex " + cure_b)
{
UnclosedLoop = true
}
}
;
if (bIsOpenSpan)
{
bClosed = true;
continue;
}
else
{
bIsOpenSpan = true; // begin open span
eCur = loop_edges[0]; // restart at other end of loop
loop_edges.Reverse(); // do this so we can push to front
continue;
}
}
int eNext = -1;
if (bdry_nbrs > 2)
{
// found "bowtie" vertex...things just got complicated!
if (cure_b == loop_verts[0])
{
// The "end" of the current edge is the same as the start vertex.
// This means we can close the loop here. Might as well!
eNext = -2; // sentinel value used below
}
else
{
// try to find an unused outgoing edge that is oriented properly.
// This could create sub-loops, we will handle those later
if (bdry_nbrs >= all_e.Length)
{
all_e = new int[2 * bdry_nbrs];
}
int num_be = Mesh.VtxAllBoundaryEdges(cure_b, all_e);
Debug.Assert(num_be == bdry_nbrs);
if (EdgeFilterF != null)
{
num_be = BufferUtil.FilterInPlace(all_e, EdgeFilterF, num_be);
}
// Try to pick the best "turn left" vertex.
eNext = find_left_turn_edge(eCur, cure_b, all_e, num_be, used_edge);
if (eNext == -1)
{
if (FailureBehavior == FailureBehaviors.ThrowException || SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: cannot find valid outgoing edge at bowtie vertex " + cure_b)
{
BowtieFailure = true
}
}
;
// ok, we are stuck. all we can do now is terminate this loop and keep it as a span
if (bIsOpenSpan)
{
bClosed = true;
}
else
{
bIsOpenSpan = true;
bClosed = true;
}
continue;
}
}
if (bowties.Contains(cure_b) == false)
{
bowties.Add(cure_b);
}
}
else
{
// walk forward to next available edge
Debug.Assert(e0 == eCur || e1 == eCur);
eNext = (e0 == eCur) ? e1 : e0;
}
if (eNext == -2)
{
// found a bowtie vert that is the same as start-of-loop, so we
// are just closing it off explicitly
bClosed = true;
}
else if (eNext == eStart)
{
// found edge at start of loop, so loop is done.
bClosed = true;
}
else if (used_edge[eNext] != false)
{
// disaster case - the next edge is already used, but it is not the start of our loop
// All we can do is convert to open span and terminate
if (FailureBehavior == FailureBehaviors.ThrowException || SpanBehavior == SpanBehaviors.ThrowException)
{
throw new MeshBoundaryLoopsException("MeshBoundaryLoops.Compute: encountered repeated edge " + eNext)
{
RepeatedEdge = true
}
}
;
bIsOpenSpan = true;
bClosed = true;
}
else
{
// push onto accumulated list
Debug.Assert(used_edge[eNext] == false);
loop_edges.Add(eNext);
used_edge[eNext] = true;
eCur = eNext;
}
}
if (bIsOpenSpan)
{
SawOpenSpans = true;
if (SpanBehavior == SpanBehaviors.Compute)
{
loop_edges.Reverse(); // orient properly
EdgeSpan span = EdgeSpan.FromEdges(Mesh, loop_edges);
Spans.Add(span);
}
}
else if (bowties.Count > 0)
{
// if we saw a bowtie vertex, we might need to break up this loop,
// so call extract_subloops
Subloops subloops = extract_subloops(loop_verts, loop_edges, bowties);
foreach (var loop in subloops.Loops)
{
Loops.Add(loop);
}
if (subloops.Spans.Count > 0)
{
FellBackToSpansOnFailure = true;
foreach (var span in subloops.Spans)
{
Spans.Add(span);
}
}
}
else
{
// clean simple loop, convert to EdgeLoop instance
EdgeLoop loop = new EdgeLoop(Mesh);
loop.Vertices = loop_verts.ToArray();
loop.Edges = loop_edges.ToArray();
Loops.Add(loop);
}
// reset these lists
loop_edges.Clear();
loop_verts.Clear();
bowties.Clear();
}
return(true);
}
// [TODO] cache this in a dictionary? we will not need very many, but we will
// need each multiple times!
Vector3d get_vtx_normal(int vid)
{
Vector3d n = Vector3d.Zero;
foreach (int ti in Mesh.VtxTrianglesItr(vid))
{
n += Mesh.GetTriNormal(ti);
}
n.Normalize();
return(n);
}
// ok, bdry_edges[0...bdry_edges_count] contains the boundary edges coming out of bowtie_v.
// We want to pick the best one to continue the loop that came in to bowtie_v on incoming_e.
// If the loops are all sane, then we will get the smallest loops by "turning left" at bowtie_v.
// So, we compute the tangent plane at bowtie_v, and then the signed angle for each
// viable edge in this plane.
//
// [TODO] handle degenerate edges. what do we do then? Currently will only chose
// degenerate edge if there are no other options (I think...)
int find_left_turn_edge(int incoming_e, int bowtie_v, int[] bdry_edges, int bdry_edges_count, BitArray used_edges)
{
// compute normal and edge [a,bowtie]
Vector3d n = get_vtx_normal(bowtie_v);
int other_v = Mesh.edge_other_v(incoming_e, bowtie_v);
Vector3d ab = Mesh.GetVertex(bowtie_v) - Mesh.GetVertex(other_v);
// our winner
int best_e = -1;
double best_angle = double.MaxValue;
for (int i = 0; i < bdry_edges_count; ++i)
{
int bdry_eid = bdry_edges[i];
if (used_edges[bdry_eid] == true)
{
continue; // this edge is already used
}
Index2i bdry_ev = Mesh.GetOrientedBoundaryEdgeV(bdry_eid);
if (bdry_ev.a != bowtie_v)
{
continue; // have to be able to chain to end of current edge, orientation-wise
}
// compute projected angle
Vector3d bc = Mesh.GetVertex(bdry_ev.b) - Mesh.GetVertex(bowtie_v);
float fAngleS = MathUtil.PlaneAngleSignedD((Vector3f)ab, (Vector3f)bc, (Vector3f)n);
// turn left!
if (best_angle == double.MaxValue || fAngleS < best_angle)
{
best_angle = fAngleS;
best_e = bdry_eid;
}
}
// [RMS] w/ bowtie vertices and open spans, this does happen
//Debug.Assert(best_e != -1);
return(best_e);
}
public virtual bool Cut()
{
double invalidDist = double.MinValue;
MeshEdgeSelection CutEdgeSet = null;
MeshVertexSelection CutVertexSet = null;
if (CutFaceSet != null)
{
CutEdgeSet = new MeshEdgeSelection(Mesh, CutFaceSet);
CutVertexSet = new MeshVertexSelection(Mesh, CutEdgeSet);
}
// compute signs
int MaxVID = Mesh.MaxVertexID;
double[] signs = new double[MaxVID];
gParallel.ForEach(Interval1i.Range(MaxVID), (vid) => {
if (Mesh.IsVertex(vid))
{
Vector3d v = Mesh.GetVertex(vid);
signs[vid] = (v - PlaneOrigin).Dot(PlaneNormal);
}
else
{
signs[vid] = invalidDist;
}
});
HashSet <int> ZeroEdges = new HashSet <int>();
HashSet <int> ZeroVertices = new HashSet <int>();
HashSet <int> OnCutEdges = new HashSet <int>();
// have to skip processing of new edges. If edge id
// is > max at start, is new. Otherwise if in NewEdges list, also new.
int MaxEID = Mesh.MaxEdgeID;
HashSet <int> NewEdges = new HashSet <int>();
IEnumerable <int> edgeItr = Interval1i.Range(MaxEID);
if (CutEdgeSet != null)
{
edgeItr = CutEdgeSet;
}
// cut existing edges with plane, using edge split
foreach (int eid in edgeItr)
{
if (Mesh.IsEdge(eid) == false)
{
continue;
}
if (eid >= MaxEID || NewEdges.Contains(eid))
{
continue;
}
Index2i ev = Mesh.GetEdgeV(eid);
double f0 = signs[ev.a];
double f1 = signs[ev.b];
// If both signs are 0, this edge is on-contour
// If one sign is 0, that vertex is on-contour
int n0 = (Math.Abs(f0) < MathUtil.Epsilon) ? 1 : 0;
int n1 = (Math.Abs(f1) < MathUtil.Epsilon) ? 1 : 0;
if (n0 + n1 > 0)
{
if (n0 + n1 == 2)
{
ZeroEdges.Add(eid);
}
else
{
ZeroVertices.Add((n0 == 1) ? ev[0] : ev[1]);
}
continue;
}
// no crossing
if (f0 * f1 > 0)
{
continue;
}
DMesh3.EdgeSplitInfo splitInfo;
MeshResult result = Mesh.SplitEdge(eid, out splitInfo);
if (result != MeshResult.Ok)
{
throw new Exception("MeshPlaneCut.Cut: failed in SplitEdge");
//return false;
}
// SplitEdge just bisects edge - use plane intersection instead
double t = f0 / (f0 - f1);
Vector3d newPos = (1 - t) * Mesh.GetVertex(ev.a) + (t) * Mesh.GetVertex(ev.b);
Mesh.SetVertex(splitInfo.vNew, newPos);
NewEdges.Add(splitInfo.eNewBN);
NewEdges.Add(splitInfo.eNewCN); OnCutEdges.Add(splitInfo.eNewCN);
if (splitInfo.eNewDN != DMesh3.InvalidID)
{
NewEdges.Add(splitInfo.eNewDN);
OnCutEdges.Add(splitInfo.eNewDN);
}
}
// remove one-rings of all positive-side vertices.
IEnumerable <int> vertexSet = Interval1i.Range(MaxVID);
if (CutVertexSet != null)
{
vertexSet = CutVertexSet;
}
foreach (int vid in vertexSet)
{
if (signs[vid] > 0 && Mesh.IsVertex(vid))
{
Mesh.RemoveVertex(vid, true, false);
}
}
// ok now we extract boundary loops, but restricted
// to either the zero-edges we found, or the edges we created! bang!!
Func <int, bool> CutEdgeFilterF = (eid) => {
if (OnCutEdges.Contains(eid) || ZeroEdges.Contains(eid))
{
return(true);
}
return(false);
};
try {
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh, false);
loops.EdgeFilterF = CutEdgeFilterF;
loops.Compute();
CutLoops = loops.Loops;
CutSpans = loops.Spans;
CutLoopsFailed = false;
FoundOpenSpans = CutSpans.Count > 0;
} catch {
CutLoops = new List <EdgeLoop>();
CutLoopsFailed = true;
}
return(true);
} // Cut()
protected void compute_full(IEnumerable <int> Triangles, bool bIsFullMeshHint = false)
{
Graph = new DGraph3();
if (WantGraphEdgeInfo)
{
GraphEdges = new DVector <GraphEdgeInfo>();
}
Vertices = new Dictionary <Vector3d, int>();
// multithreaded precomputation of per-vertex values
double[] vertex_values = null;
if (PrecomputeVertexValues)
{
vertex_values = new double[Mesh.MaxVertexID];
IEnumerable <int> verts = Mesh.VertexIndices();
if (bIsFullMeshHint == false)
{
MeshVertexSelection vertices = new MeshVertexSelection(Mesh);
vertices.SelectTriangleVertices(Triangles);
verts = vertices;
}
gParallel.ForEach(verts, (vid) => {
vertex_values[vid] = ValueF(Mesh.GetVertex(vid));
});
VertexValueF = (vid) => { return(vertex_values[vid]); };
}
foreach (int tid in Triangles)
{
Vector3dTuple3 tv = new Vector3dTuple3();
Mesh.GetTriVertices(tid, ref tv.V0, ref tv.V1, ref tv.V2);
Index3i triVerts = Mesh.GetTriangle(tid);
Vector3d f = (VertexValueF != null) ?
new Vector3d(VertexValueF(triVerts.a), VertexValueF(triVerts.b), VertexValueF(triVerts.c))
: new Vector3d(ValueF(tv.V0), ValueF(tv.V1), ValueF(tv.V2));
// round f to 0 within epsilon?
if (f.x < 0 && f.y < 0 && f.z < 0)
{
continue;
}
if (f.x > 0 && f.y > 0 && f.z > 0)
{
continue;
}
Index3i triEdges = Mesh.GetTriEdges(tid);
if (f.x * f.y * f.z == 0)
{
int z0 = (f.x == 0) ? 0 : ((f.y == 0) ? 1 : 2);
int i1 = (z0 + 1) % 3, i2 = (z0 + 2) % 3;
if (f[i1] * f[i2] > 0)
{
continue; // single-vertex-crossing case, skip here and let other edges catch it
}
if (f[i1] == 0 || f[i2] == 0)
{
// on-edge case
int z1 = f[i1] == 0 ? i1 : i2;
if ((z0 + 1) % 3 != z1)
{
int tmp = z0; z0 = z1; z1 = tmp; // catch reverse-orientation cases
}
int e0 = add_or_append_vertex(Mesh.GetVertex(triVerts[z0]));
int e1 = add_or_append_vertex(Mesh.GetVertex(triVerts[z1]));
int graph_eid = Graph.AppendEdge(e0, e1, (int)TriangleCase.OnEdge);
if (graph_eid >= 0 && WantGraphEdgeInfo)
{
add_on_edge(graph_eid, tid, triEdges[z0], new Index2i(e0, e1));
}
}
else
{
// edge/vertex case
Util.gDevAssert(f[i1] * f[i2] < 0);
int vert_vid = add_or_append_vertex(Mesh.GetVertex(triVerts[z0]));
int i = i1, j = i2;
if (triVerts[j] < triVerts[i])
{
int tmp = i; i = j; j = tmp;
}
Vector3d cross = find_crossing(tv[i], tv[j], f[i], f[j]);
int cross_vid = add_or_append_vertex(cross);
add_edge_pos(triVerts[i], triVerts[j], cross);
int graph_eid = Graph.AppendEdge(vert_vid, cross_vid, (int)TriangleCase.EdgeVertex);
if (graph_eid >= 0 && WantGraphEdgeInfo)
{
add_edge_vert(graph_eid, tid, triEdges[(z0 + 1) % 3], triVerts[z0], new Index2i(vert_vid, cross_vid));
}
}
}
else
{
Index3i cross_verts = Index3i.Min;
int less_than = 0;
for (int tei = 0; tei < 3; ++tei)
{
int i = tei, j = (tei + 1) % 3;
if (f[i] < 0)
{
less_than++;
}
if (f[i] * f[j] > 0)
{
continue;
}
if (triVerts[j] < triVerts[i])
{
int tmp = i; i = j; j = tmp;
}
Vector3d cross = find_crossing(tv[i], tv[j], f[i], f[j]);
cross_verts[tei] = add_or_append_vertex(cross);
add_edge_pos(triVerts[i], triVerts[j], cross);
}
int e0 = (cross_verts.a == int.MinValue) ? 1 : 0;
int e1 = (cross_verts.c == int.MinValue) ? 1 : 2;
if (e0 == 0 && e1 == 2) // preserve orientation order
{
e0 = 2; e1 = 0;
}
// preserving orientation does not mean we get a *consistent* orientation across faces.
// To do that, we need to assign "sides". Either we have 1 less-than-0 or 1 greater-than-0 vtx.
// Arbitrary decide that we want loops oriented like bdry loops would be if we discarded less-than side.
// In that case, when we are "cutting off" one vertex, orientation would end up flipped
if (less_than == 1)
{
int tmp = e0; e0 = e1; e1 = tmp;
}
int ev0 = cross_verts[e0];
int ev1 = cross_verts[e1];
// [RMS] if function is garbage, we can end up w/ case where both crossings
// happen at same vertex, even though values are not the same (eg if
// some values are double.MaxValue). We will just fail in these cases.
if (ev0 != ev1)
{
Util.gDevAssert(ev0 != int.MinValue && ev1 != int.MinValue);
int graph_eid = Graph.AppendEdge(ev0, ev1, (int)TriangleCase.EdgeEdge);
if (graph_eid >= 0 && WantGraphEdgeInfo)
{
add_edge_edge(graph_eid, tid, new Index2i(triEdges[e0], triEdges[e1]), new Index2i(ev0, ev1));
}
}
}
}
Vertices = null;
}
public virtual bool Extrude()
{
MeshNormals normals = null;
bool bHaveNormals = Mesh.HasVertexNormals;
if (!bHaveNormals)
{
normals = new MeshNormals(Mesh);
normals.Compute();
}
InitialLoops = new MeshBoundaryLoops(Mesh);
InitialTriangles = Mesh.TriangleIndices().ToArray();
InitialVertices = Mesh.VertexIndices().ToArray();
// duplicate triangles of mesh
InitialToOffsetMapV = new IndexMap(Mesh.MaxVertexID, Mesh.MaxVertexID);
OffsetGroupID = OffsetGroup.GetGroupID(Mesh);
var editor = new MeshEditor(Mesh);
OffsetTriangles = editor.DuplicateTriangles(InitialTriangles, ref InitialToOffsetMapV, OffsetGroupID);
// set vertices to new positions
foreach (int vid in InitialVertices)
{
int newvid = InitialToOffsetMapV[vid];
if (!Mesh.IsVertex(newvid))
{
continue;
}
Vector3d v = Mesh.GetVertex(vid);
Vector3f n = (bHaveNormals) ? Mesh.GetVertexNormal(vid) : (Vector3f)normals.Normals[vid];
Vector3d newv = ExtrudedPositionF(v, n, vid);
Mesh.SetVertex(newvid, newv);
}
// we need to reverse one side
if (IsPositiveOffset)
{
editor.ReverseTriangles(InitialTriangles);
}
else
{
editor.ReverseTriangles(OffsetTriangles);
}
// stitch each loop
NewLoops = new EdgeLoop[InitialLoops.Count];
StitchTriangles = new int[InitialLoops.Count][];
StitchGroupIDs = new int[InitialLoops.Count];
int li = 0;
foreach (var loop in InitialLoops)
{
int[] loop2 = new int[loop.VertexCount];
for (int k = 0; k < loop2.Length; ++k)
{
loop2[k] = InitialToOffsetMapV[loop.Vertices[k]];
}
StitchGroupIDs[li] = StitchGroups.GetGroupID(Mesh);
if (IsPositiveOffset)
{
StitchTriangles[li] = editor.StitchLoop(loop2, loop.Vertices, StitchGroupIDs[li]);
}
else
{
StitchTriangles[li] = editor.StitchLoop(loop.Vertices, loop2, StitchGroupIDs[li]);
}
NewLoops[li] = EdgeLoop.FromVertices(Mesh, loop2);
li++;
}
return(true);
}
