/// <summary>
/// Creates a Bitmap image with size width,height.
/// From the area (x1,y2) to (x2,y2) where x1,y1,x2,y2 are
/// geological coordinates.
/// </summary>
public Bitmap GetTile(double x1, double y1, double x2, double y2, int width, int height)
{
Bitmap tile = new Bitmap(width, height);
int zoomLevel = GetZoomLevel(x1, x2, width);
BBox box = new BBox(x1, y1, x2, y2);
// Make searchbox wider dependent on zoomlevel.
// Explanation at summary of getSearchBBox.
BBox searchBox = getSearchBBox(box, zoomLevel);
// Clears image with grey backgroundcolor.
Graphics.FromImage(tile).Clear(Color.FromArgb(230, 230, 230));
// Draww all seperate elements in following order:
// Land -> Buildings -> Streets -> extra locations (Busstations, parking signs)
drawLandCurves(box, tile, graph.GetLandsInBBox(searchBox));
drawBuildingCurves(box, tile, graph.GetBuildingsInBBox(searchBox));
drawStreetCurves(box, tile, graph.GetWaysInBBox(searchBox), zoomLevel);
drawExtras(box, tile, graph.GetExtrasInBBox(BBox.getResizedBBox(box, 2)), zoomLevel);
//drawAdditionalCurves(box, tile, graph.GetExtrasinBBOX(searchBox), zoomLevel);
//used for debugging
//Graphics.FromImage(tile).DrawLines(Pens.LightGray, new Point[] { Point.Empty, new Point(0, height), new Point(width, height), new Point(width, 0), Point.Empty });
return tile;
}
/// <summary>
/// Resizes a BBox by a factor so that the middle stays
/// at the same location.
/// </summary>
public static BBox getResizedBBox(BBox box, double factor)
{
BBox resizedBBox = new BBox(box.XMin, box.YMin, box.XMax, box.YMax);
resizedBBox.XMin -= (factor - 1) * box.Width / 2;
resizedBBox.XMax += (factor - 1) * box.Width / 2;
resizedBBox.YMin -= (factor - 1) * box.Height / 2;
resizedBBox.YMax += (factor - 1) * box.Height / 2;
return(resizedBBox);
}
/// <summary>
/// Draws all buildings in "buildingCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// </summary>
private void drawBuildingCurves(BBox box, Bitmap tile, Curve[] buildingCurves)
{
foreach (Curve buildingCurve in buildingCurves)
{
Brush brush = getBrushFromCurveType(buildingCurve.Type);
if (brush != null)
{
drawLanduse(box, tile, buildingCurve, brush);
}
}
}
/// <summary>
/// Draws all landpieces in "landCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// </summary>
private void drawLandCurves(BBox box, Bitmap tile, Curve[] landCurves)
{
foreach (Curve landCurve in landCurves)
{
Brush brush = getBrushFromCurveType(landCurve.Type);
if (brush != null)
{
drawLanduse(box, tile, landCurve, brush);
}
}
}
/// <summary>
/// Draws a location on the map with Image "icon" on
/// the Bitmap "tile", where box represents the position
/// and size of the tile in geological coordinates.
/// </summary>
private void drawExtra(BBox box, Bitmap tile, Location location, Image icon)
{
Graphics gr = Graphics.FromImage(tile);
gr.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
Point start = nodeToTilePoint(box, tile, new Node(box.XMin, box.YMax, 0));
Point p = nodeToTilePoint(box, tile, location);
gr.DrawImage(icon, new Point(p.X - start.X, -p.Y + start.Y));
}
/// <summary>
/// Draws all streets in "streetCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// Streets will only be drawn in certain zoomlevels.
/// </summary>
private void drawStreetCurves(BBox box, Bitmap tile, Curve[] streetCurves, int zoomLevel)
{
foreach (Curve streetCurve in streetCurves)
{
Pen pen = getPenFromCurveType(streetCurve.Type, zoomLevel);
if (pen != null)
{
drawStreet(box, tile, streetCurve, getPenFromCurveType(streetCurve.Type, zoomLevel));
}
}
}
/// <summary>
/// Draws all locations in "extraLocations" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// Locations will only be drawn in certain zoomlevels.
/// </summary>
private void drawExtras(BBox box, Bitmap tile, Location[] extraLocations, int zoomLevel)
{
foreach (Location extraLocation in extraLocations)
{
Image icon = getIconFromLocationType(extraLocation.Type, zoomLevel);
if (icon != null)
{
drawExtra(box, tile, extraLocation, icon);
}
}
}
/// <summary>
/// Resizes the BBox box if zoomlevel is very low.
/// This is because when curves pass through a tile but no nodes
/// of that curve are in that tile the curve won't be drawn in that tile.
/// So on very low zoomlevels, we need to search wider to draw all
/// curves in a tile.
/// </summary>
private BBox getSearchBBox(BBox box, int zoomLevel)
{
if (zoomLevel == 1)
{
return(BBox.getResizedBBox(box, 3));
}
if (zoomLevel == 0)
{
return(BBox.getResizedBBox(box, 7));
}
return(box);
}
/// <summary>
/// Returns true if the tileCorner with index 'id' is in the screen.
/// </summary>
private bool IsInScreen(int id)
{
if (id >= tileCorners[tileIndex].Count)
{
return(false);
}
Coordinate c1 = PointToCoord(tileCorners[tileIndex][id].X, tileCorners[tileIndex][id].Y);
Coordinate c2 = PointToCoord(tileCorners[tileIndex][id].X + bmpWidth, tileCorners[tileIndex][id].Y + bmpHeight);
BBox box = new BBox(c1.Longitude, c1.Latitude, c2.Longitude, c2.Latitude);
return(this.bounds.IntersectWith(box));
}
/// <summary>
/// Draws a piece of land or building using Brush "brush"
/// on the Bitmap "tile", where box represents the position
/// and size of the tile in geological coordinates.
/// </summary>
private void drawLanduse(BBox box, Bitmap tile, Curve curve, Brush brush)
{
List <Point> polygonPoints = new List <Point>();
Point start = nodeToTilePoint(box, tile, new Node(box.XMin, box.YMax, 0));
Graphics gr = Graphics.FromImage(tile);
gr.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
for (int i = 0; i < curve.AmountOfNodes; i++)
{
Node node = graph.GetNode(curve[i]);
if (node.Longitude != 0 && node.Latitude != 0)
{
Point p = nodeToTilePoint(box, tile, node);
polygonPoints.Add(new Point(p.X - start.X, -p.Y + start.Y));
}
}
gr.FillPolygon(brush, polygonPoints.ToArray());
}
public Curve[] GetCurvesInBBox(BBox box)
{
List<Curve> list = new List<Curve>();
list.AddRange(GetLandsInBBox(box));
list.AddRange(GetBuildingsInBBox(box));
list.AddRange(GetWaysInBBox(box));
return list.ToArray();
}
/// <summary>
/// Control that draws the map and updates the tiles.
/// </summary>
public MapDisplay(int x, int y, int width, int height, LoadingThread thr)
{
this.Location = new Point(x, y);
this.Width = width;
this.Height = height;
this.bounds = new BBox(5.16130, 52.06070, 5.19430, 52.09410);
this.DoubleBuffered = true;
this.updateStatusDelegate = new UpdateStatusDelegate(UpdateStatus);
this.updateRouteStatsDelegate = new UpdateRouteStatsDelegate(UpdateRouteStats);
this.startLogoDelegate = new StartLogoDelegate(StartLoadingLogo);
this.stopLogoDelegate = new StopLogoDelegate(StopLoadingLogo);
this.updateThread = new Thread(new ThreadStart(this.UpdateTiles));
this.MouseClick += (object o, MouseEventArgs mea) => { OnClick(o, new MouseMapDragEventArgs(null, mea.Button, mea.Clicks,
mea.X, mea.Y, mea.Delta)); };
this.MouseDoubleClick += OnDoubleClick;
this.Paint += OnPaint;
this.Resize += OnResize;
this.MouseDown += OnMouseDown;
this.MouseUp += OnMouseUp;
this.MouseMove += OnMouseMove;
this.Disposed += (object o, EventArgs ea) => { updateThread.Abort(); };
// Thread that loads the graph.
loadingThread = thr;
// Checks whether the graph is loaded so the mapdisplay can start loading tiles.
loadingTimer = new System.Windows.Forms.Timer();
loadingTimer.Interval = 100;
loadingTimer.Tick += (object o, EventArgs ea) => { DoUpdate(); };
loadingTimer.Start();
logo = new AllstarsLogo(true);
logo.Location = Point.Empty;
logo.Width = this.Width;
logo.Height = this.Height;
this.Controls.Add(logo);
logo.Start();
LinkLabel creditLabel = new LinkLabel();
creditLabel.Text = "© OpenStreetMap contributors";
creditLabel.LinkArea = new LinkArea(2, 13);
creditLabel.LinkClicked += (object o, LinkLabelLinkClickedEventArgs ea) => { System.Diagnostics.Process.Start("http://www.openstreetmap.org/copyright/en"); };
creditLabel.Anchor = (AnchorStyles.Right | AnchorStyles.Bottom);
creditLabel.Size = creditLabel.PreferredSize;
creditLabel.Location = new Point(this.Width - creditLabel.Width - 1, this.Height - creditLabel.Height - 1);
this.Controls.Add(creditLabel);
statLabel = new Label();
statLabel.AutoSize = true;
statLabel.Resize += (object o, EventArgs ea) => { statLabel.Location = new Point(this.Width - 1 - statLabel.Size.Width, 1); };
statLabel.Anchor = (AnchorStyles.Right | AnchorStyles.Top);
statLabel.Font = new Font("Microsoft Sans Serif", 11);
this.Controls.Add(statLabel);
myVehicles = new List<MyVehicle>();
icons = new List<MapIcon>();
streetSelection = new List<Curve>();
tiles = new List<List<Bitmap>>();
tileCorners = new List<List<Point>>();
tiles.Add(new List<Bitmap>());
tileCorners.Add(new List<Point>());
tileIndex = 0;
tileIndexes = new List<SortedList<int, SortedList<int, int>>>();
tileIndexes.Add(new SortedList<int, SortedList<int, int>>());
zoomWidth = new List<double>();
zoomHeight = new List<double>();
this.Disposed += (sender, e) =>
{
logo.StillLoading = false;
};
// Set linecaps for the pens.
footPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
bikePen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
carPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
busPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
otherPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
}
/// <summary>
/// Draws all locations in "extraLocations" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// Locations will only be drawn in certain zoomlevels.
/// </summary>
private void drawExtras(BBox box, Bitmap tile, Location[] extraLocations, int zoomLevel)
{
foreach (Location extraLocation in extraLocations)
{
Image icon = getIconFromLocationType(extraLocation.Type, zoomLevel);
if (icon != null)
{
drawExtra(box, tile, extraLocation, icon);
}
}
}
/// <summary>
/// Resizes a BBox by a factor so that the middle stays
/// at the same location.
/// </summary>
public static BBox getResizedBBox(BBox box, double factor)
{
BBox resizedBBox = new BBox(box.XMin, box.YMin, box.XMax, box.YMax);
resizedBBox.XMin -= (factor - 1) * box.Width / 2;
resizedBBox.XMax += (factor - 1) * box.Width / 2;
resizedBBox.YMin -= (factor - 1) * box.Height / 2;
resizedBBox.YMax += (factor - 1) * box.Height / 2;
return resizedBBox;
}
public Graph(string path)
{
List<long>[,] geoBlocks = null;
datasource = path;
// Buffer is 1024 fileblocks big
FileStream file = new FileStream(datasource, FileMode.Open, FileAccess.Read,
FileShare.Read, 8 * 1024 * 1024);
// List of file-positions where blocks with ways and/or
// relations start.
List<long> wayBlocks = new List<long>();
// We will read the fileblocks in parallel
List<long> blocks = new List<long>();
List<long> busNodes = new List<long>();
List<string> busNames = new List<string>();
Console.WriteLine("Finding blocks");
while (true)
{
long blockstart = file.Position;
BlobHeader blobHead = readBlobHeader(file);
if (blobHead == null)
break;
if (blobHead.Type == "OSMHeader")
{
HeaderBlock filehead = HeaderBlock.ParseFrom(
readBlockData(file, blobHead.Datasize));
for (int i = 0; i < filehead.RequiredFeaturesCount; i++)
{
string s = filehead.GetRequiredFeatures(i);
if (s != "DenseNodes" && s != "OsmSchema-V0.6")
{
throw new NotSupportedException(s);
}
}
// The .000000001 is 'cause longs are stored
fileBounds = new BBox(.000000001 * filehead.Bbox.Left,
.000000001 * filehead.Bbox.Top,
.000000001 * filehead.Bbox.Right,
.000000001 * filehead.Bbox.Bottom);
horizontalGeoBlocks = (int)(fileBounds.Width / geoBlockWidth) + 1;
verticalGeoBlocks = (int)(fileBounds.Height / geoBlockHeight) + 1;
//Console.WriteLine("geoblocks {0}x{1}", horizontalGeoBlocks, verticalGeoBlocks);
geoBlocks = new List<long>[horizontalGeoBlocks + 1,
verticalGeoBlocks + 1];
wayGeoBlocks = new List<long>[horizontalGeoBlocks + 1,
verticalGeoBlocks + 1];
landGeoBlocks = new List<long>[horizontalGeoBlocks + 1,
verticalGeoBlocks + 1];
buildingGeoBlocks = new List<long>[horizontalGeoBlocks + 1,
verticalGeoBlocks + 1];
}
else
{
file.Position += blobHead.Datasize;
blocks.Add(blockstart);
}
}
Console.WriteLine("Reading nodes");
Parallel.ForEach(blocks, blockstart =>
//foreach(long blockstart in blocks)
{
BlobHeader blobHead;
byte[] blockData;
lock (file)
{
file.Position = blockstart;
blobHead = readBlobHeader(file);
// This means End Of File
if (blobHead == null || blobHead.Type == "OSMHeader")
throw new Exception("Should never happen");
blockData = readBlockData(file, blobHead.Datasize);
}
if (blobHead.Type == "OSMData")
{
PrimitiveBlock pb = PrimitiveBlock.ParseFrom(blockData);
for (int i = 0; i < pb.PrimitivegroupCount; i++)
{
PrimitiveGroup pg = pb.GetPrimitivegroup(i);
if (pg.HasDense)
{
// Remember the start of every blob with nodes
nodeBlockIndexes.Insert(pg.Dense.GetId(0), blockstart);
long id = 0;
double latitude = 0, longitude = 0;
for (int j = 0; j < pg.Dense.IdCount; j++)
{
id += pg.Dense.GetId(j);
latitude += .000000001 * (pb.LatOffset +
pb.Granularity * pg.Dense.GetLat(j));
longitude += .000000001 * (pb.LonOffset +
pb.Granularity * pg.Dense.GetLon(j));
if (fileBounds.Contains(longitude, latitude))
{
int blockX = XBlock(longitude);
int blockY = YBlock(latitude);
List<long> list = geoBlocks[blockX, blockY];
if (list == null)
geoBlocks[blockX, blockY] = list = new List<long>();
list.Add(id);
}
}
}
else
{
wayBlocks.Add(blockstart);
}
}
}
//else
//Console.WriteLine("Unknown blocktype: " + blobHead.Type);
});
Console.WriteLine("Reading ways");
Parallel.ForEach(blocks, blockstart =>
//foreach(long blockstart in wayBlocks)
{
BlobHeader blobHead;
byte[] blockData;
lock (file)
{
file.Position = blockstart;
blobHead = readBlobHeader(file);
// This means End Of File
if (blobHead == null || blobHead.Type == "OSMHeader")
throw new Exception("Should never happen");
blockData = readBlockData(file, blobHead.Datasize);
}
if (blobHead.Type == "OSMData")
{
PrimitiveBlock pb = PrimitiveBlock.ParseFrom(blockData);
for (int i = 0; i < pb.PrimitivegroupCount; i++)
{
PrimitiveGroup pg = pb.GetPrimitivegroup(i);
/*
* Part one: read all the curves and add them
*/
// Insert curves in the curve tree
for (int j = 0; j < pg.WaysCount; j++)
{
CurveType type = CurveType.UnTested;
OSMPBF.Way w = pg.GetWays(j);
// Nodes in this way
List<long> nodes = new List<long>();
long id = 0;
for (int k = 0; k < w.RefsCount; k++)
{
id += w.GetRefs(k);
nodes.Add(id);
}
string name = "";
int maxSpeed = 0;
bool makeCurve = true;
bool curveTypeSpecified = true;
bool carSpecified = false;
bool bicycleSpecified = false;
bool footSpecified = false;
bool busSpecified = false;
bool carAllowed = false;
bool bicycleAllowed = false;
bool footAllowed = false;
bool busAllowed = false;
for (int k = 0; k < w.KeysCount; k++)
{
string key = pb.Stringtable.GetS(
(int)w.GetKeys(k)).ToStringUtf8();
string value = pb.Stringtable.GetS(
(int)w.GetVals(k)).ToStringUtf8();
#region Process keys
switch (key.ToLower())
{
#region highway
case "highway":
switch (value)
{
case "bus_guideway":
type = CurveType.Bus_guideway;
break;
case "construction":
type = CurveType.Construction_street;
break;
case "cycleway":
type = CurveType.Cycleway;
break;
case "footway":
type = CurveType.Footway;
break;
case "Living_street":
type = CurveType.Living_street;
break;
case "motorway":
type = CurveType.Motorway;
break;
case "motorway_link":
type = CurveType.Motorway_link;
break;
case "pedestrian":
type = CurveType.Pedestrian;
break;
case "primary":
type = CurveType.Primary;
break;
case "primary_link":
type = CurveType.Primary_link;
break;
case "proposed":
type = CurveType.Proposed;
break;
case "raceway":
type = CurveType.Raceway;
break;
case "residential":
type = CurveType.Residential_street;
break;
case "road":
type = CurveType.Road;
break;
case "secondary":
type = CurveType.Secondary;
break;
case "secondary_link":
type = CurveType.Secondary_link;
break;
case "service":
type = CurveType.Service;
break;
case "steps":
type = CurveType.Steps;
break;
case "tertiary":
type = CurveType.Tertiary;
break;
case "tertiary_link":
type = CurveType.Tertiary_link;
break;
case "track":
type = CurveType.Track;
break;
case "trunk":
type = CurveType.Trunk;
break;
case "trunk_link":
type = CurveType.Trunk_link;
break;
case "unclassified":
type = CurveType.Unclassified;
break;
case "path":
type = CurveType.Path;
break;
default:
//Console.WriteLine("TODO: highway=" + value);
break;
}
break;
#endregion
#region landuse
case "landuse":
switch (value)
{
case "allotments":
type = CurveType.Allotments;
break;
case "basin":
type = CurveType.Basin;
break;
case "construction":
type = CurveType.Construction_land;
break;
case "grass":
type = CurveType.Grass;
break;
case "farm":
type = CurveType.Farm;
break;
case "forest":
type = CurveType.Forest;
break;
case "military":
type = CurveType.Military;
break;
case "orchard":
type = CurveType.Orchard;
break;
case "pond":
type = CurveType.Salt_pond;
break;
case "recreation_centre":
type = CurveType.Recreation_ground;
break;
default:
//Console.WriteLine("TODO: landuse=" + value);
break;
}
break;
#endregion
case "building":
type = CurveType.Building;
break;
case "natural":
if (value == "water")
type = CurveType.Water;
break;
case "name":
case "addr:housename":
case "alt_name":
case "loc_name":
case "name_alt":
case "name:left":
case "name:right":
if(name == "")
name = value;
else
name = name + "/" + value;
break;
case "maxspeed":
int.TryParse(value, out maxSpeed);
break;
case "bicycle":
case "bicycle:backward":
case "cyclestreet":
case "cycleway":
case "cycleway:lane":
case "cycleway:left":
case "cycleway:left:surface":
case "cycleway:left:width":
case "cycleway:right":
case "cycleway:right:surface":
case "cycleway:right:width":
case "cycleway:surface":
case "cycleway:width":
bicycleSpecified = true;
bicycleAllowed = value != "no";
break;
case "bicycle:oneway":
case "oneway:bicycle":
case "cycleway:oneway":
case "oneway:cycleway:":
bicycleSpecified = true;
bicycleAllowed = true;
break;
case "vehicle":
bicycleSpecified = true;
carSpecified = true;
if(value == "no")
{
bicycleAllowed = false;
carAllowed = false;
}
else
{
bicycleAllowed = true;
carAllowed = true;
}
break;
case "car":
case "motorcar":
case "motor_vehicle":
carSpecified = true;
carAllowed = value != "no";
break;
case "foot":
case "footway":
footSpecified = true;
footAllowed = value != "no";
break;
case "public_transport":
type = CurveType.PublicTransportPlatform;
break;
case "bus":
if(value != "no")
type = CurveType.PublicServiceVehicles;
break;
case "waterway":
case "water":
// TODO? draw these things?
// Or just the lake/basin/pond?
if (value == "ditch" ||
value == "drain" ||
value == "weir" ||
value == "stream" ||
value == "yes" ||
value == "river" ||
value == "culvert" ||
value == "drain; culvert" ||
value == "Ditch" ||
value == "Tank_ditch" ||
value == "dept_line" ||
value == "lock" ||
value == "canal"
)
{
type = CurveType.Waterway;
}
if (
value == "lake" ||
value == "basin" ||
value == "pond" ||
value == "riverbank"
)
{
type = CurveType.Water;
}
break;
case "psv":
if (value == "yes")
type = CurveType.PublicServiceVehicles;
break;
case "amenity":
if (value == "parking")
{
type = CurveType.Parking;
Coordinate center = FindCentroid(nodes);
extras.Add(new Location(new Node(center.Longitude, center.Latitude, 0), LocationType.Parking));
}
break;
case "power":
if (value == "generator")
type = CurveType.Power;
break;
default:
if (key.StartsWith("building"))
{
type = CurveType.Building;
}
break;
}
#endregion
}
// Try to make sense of tags
#region Process transport tags
if (type.IsStreet())
{
// If type props don't match specified props
if(!curveTypeSpecified ||
(bicycleSpecified &&
(bicycleAllowed != type.BicyclesAllowed())) ||
(carSpecified &&
(carAllowed != type.CarsAllowed())) ||
(footSpecified &&
(footAllowed != type.FootAllowed())))
{
// What is specified exactly?
footAllowed = footSpecified ?
footAllowed : type.FootAllowed();
bicycleAllowed = bicycleSpecified ?
bicycleAllowed : type.BicyclesAllowed();
carAllowed = carSpecified ?
carAllowed : type.CarsAllowed();
// Tedious matching of stuff
if(carAllowed)
{
if(footAllowed)
{
if (bicycleAllowed)
type = CurveType.CarBicycleFoot;
}
else
{
if(bicycleAllowed)
type = CurveType.CarBicycleNoFoot;
else
type = CurveType.Motorway;
}
}
else
{
// What is specified exactly?
footAllowed = footSpecified ?
footAllowed : type.FootAllowed();
bicycleAllowed = bicycleSpecified ?
bicycleAllowed : type.BicyclesAllowed();
carAllowed = carSpecified ?
carAllowed : type.CarsAllowed();
if(type == CurveType.PublicServiceVehicles)
{
if(footAllowed)
{
if(bicycleAllowed)
type = CurveType.BusFootBicycle;
else
type = CurveType.BusFoot;
}
else
type = CurveType.BusBicycle;
}
else
{
if(footAllowed && bicycleAllowed)
type = CurveType.Path;
if(footAllowed && !bicycleAllowed)
type = CurveType.Footway;
if(!footAllowed && bicycleAllowed)
type = CurveType.NoCarBicycleNoFoot;
if(!footAllowed && !bicycleAllowed)
type = CurveType.NoneAllowed;
}
}
}
}
#endregion
if (makeCurve)
{
Curve c = new Curve(nodes.ToArray(), name);
c.Name = name;
c.Type = type;
if (type.IsStreet())
{
foreach (long n in nodes)
{
ways.Insert(n, c);
}
if (maxSpeed > 0)
{
c.MaxSpeed = maxSpeed;
}
}
else
{
if (type.IsBuilding())
{
foreach (long n in nodes)
{
buildings.Insert(n, c);
}
}
else
{
foreach (long n in nodes)
{
lands.Insert(n, c);
}
}
}
}
}
/*
* Part two: adding bus routes and the likes
*/
ListTree<long> endIdStartId = new ListTree<long>();
//Parallel.For(0, pg.RelationsCount, j =>
for(int j = 0; j < pg.RelationsCount; j++)
{
Relation rel = pg.GetRelations(j);
bool publictransport = false;
string name = "";
for (int k = 0; k < rel.KeysCount; k++)
{
string key = pb.Stringtable.GetS((int)rel.GetKeys(k)).ToStringUtf8();
string value = pb.Stringtable.GetS((int)rel.GetVals(k)).ToStringUtf8();
if (key == "route" && (value == "bus" ||
value == "trolleybus" ||
value == "share_taxi" ||
value == "tram"))
publictransport = true;
if (key == "ref")
name = value;
}
if (publictransport)
{
long id = 0;
//List<long> nodes = new List<long>();
for (int k = 0; k < rel.MemidsCount; k++)
{
id += rel.GetMemids(k);
string role = pb.Stringtable.GetS((int)rel.GetRolesSid(k)).ToStringUtf8();
string type = rel.GetTypes(k).ToString();
//Console.WriteLine(type + " " + id + " is " + role);
if (type == "NODE" && role.StartsWith("stop"))
{
busNodes.Add(id);
busNames.Add(name);
}
}
for (int l = 0; l < busNodes.Count - 1; l++)
{
Edge e = new Edge(busNodes[l], busNodes[l + 1]);
e.Type = CurveType.AbstractBusRoute;
if (!endIdStartId.Get(e.End).Contains(e.Start))
{
abstractBusWays.Add(e);
endIdStartId.Insert(e.End, e.Start);
}
}
Edge e2 = new Edge(busNodes[busNodes.Count - 1], 0);
e2.Type = CurveType.AbstractBusRoute;
abstractBusWays.Add(e2);
endIdStartId.Insert(busNodes[busNodes.Count - 1], 0);
}
}
}
}
});
file.Close();
Console.WriteLine("Sorting nodes");
Parallel.For(0, horizontalGeoBlocks, (x) =>
{
for(int y = 0; y <= verticalGeoBlocks; y++)
{
if(geoBlocks[x, y] != null)
{
List<long> wayList = new List<long>();
List<long> landList = new List<long>();
List<long> buildingList = new List<long>();
foreach(long id in geoBlocks[x, y])
{
if(ways.Get(id).Count != 0)
wayList.Add(id);
if(lands.Get(id).Count != 0)
landList.Add(id);
if(buildings.Get(id).Count != 0)
buildingList.Add(id);
}
wayGeoBlocks[x, y] = wayList;
landGeoBlocks[x, y] = landList;
buildingGeoBlocks[x, y] = buildingList;
}
}
});
Console.WriteLine("Routing busStations");
// Add busstations
for (int i = 0; i < busNodes.Count; i++)
{
if (busStations.Get(busNodes[i]) == null)
{
Node n = GetNode(busNodes[i]);
if (n.Longitude != 0 && n.Latitude != 0)
{
busStations.Insert(busNodes[i], n);
extras.Add(new Location(n, LocationType.BusStation));
}
}
}
busThread = new Thread(new ThreadStart(() => { LoadBusses(); }));
busThread.Start();
}
/// <summary>
/// Control that draws the map and updates the tiles.
/// </summary>
public MapDisplay(int x, int y, int width, int height, LoadingThread thr)
{
this.Location = new Point(x, y);
this.Width = width;
this.Height = height;
this.bounds = new BBox(5.16130, 52.06070, 5.19430, 52.09410);
this.DoubleBuffered = true;
this.updateStatusDelegate = new UpdateStatusDelegate(UpdateStatus);
this.updateRouteStatsDelegate = new UpdateRouteStatsDelegate(UpdateRouteStats);
this.startLogoDelegate = new StartLogoDelegate(StartLoadingLogo);
this.stopLogoDelegate = new StopLogoDelegate(StopLoadingLogo);
this.updateThread = new Thread(new ThreadStart(this.UpdateTiles));
this.MouseClick += (object o, MouseEventArgs mea) => { OnClick(o, new MouseMapDragEventArgs(null, mea.Button, mea.Clicks,
mea.X, mea.Y, mea.Delta)); };
this.MouseDoubleClick += OnDoubleClick;
this.Paint += OnPaint;
this.Resize += OnResize;
this.MouseDown += OnMouseDown;
this.MouseUp += OnMouseUp;
this.MouseMove += OnMouseMove;
this.Disposed += (object o, EventArgs ea) => { updateThread.Abort(); };
// Thread that loads the graph.
loadingThread = thr;
// Checks whether the graph is loaded so the mapdisplay can start loading tiles.
loadingTimer = new System.Windows.Forms.Timer();
loadingTimer.Interval = 100;
loadingTimer.Tick += (object o, EventArgs ea) => { DoUpdate(); };
loadingTimer.Start();
logo = new AllstarsLogo(true);
logo.Location = Point.Empty;
logo.Width = this.Width;
logo.Height = this.Height;
this.Controls.Add(logo);
logo.Start();
LinkLabel creditLabel = new LinkLabel();
creditLabel.Text = "© OpenStreetMap contributors";
creditLabel.LinkArea = new LinkArea(2, 13);
creditLabel.LinkClicked += (object o, LinkLabelLinkClickedEventArgs ea) => { System.Diagnostics.Process.Start("http://www.openstreetmap.org/copyright/en"); };
creditLabel.Anchor = (AnchorStyles.Right | AnchorStyles.Bottom);
creditLabel.Size = creditLabel.PreferredSize;
creditLabel.Location = new Point(this.Width - creditLabel.Width - 1, this.Height - creditLabel.Height - 1);
this.Controls.Add(creditLabel);
statLabel = new Label();
statLabel.AutoSize = true;
statLabel.Resize += (object o, EventArgs ea) => { statLabel.Location = new Point(this.Width - 1 - statLabel.Size.Width, 1); };
statLabel.Anchor = (AnchorStyles.Right | AnchorStyles.Top);
statLabel.Font = new Font("Microsoft Sans Serif", 11);
this.Controls.Add(statLabel);
myVehicles = new List <MyVehicle>();
icons = new List <MapIcon>();
streetSelection = new List <Curve>();
tiles = new List <List <Bitmap> >();
tileCorners = new List <List <Point> >();
tiles.Add(new List <Bitmap>());
tileCorners.Add(new List <Point>());
tileIndex = 0;
tileIndexes = new List <SortedList <int, SortedList <int, int> > >();
tileIndexes.Add(new SortedList <int, SortedList <int, int> >());
zoomWidth = new List <double>();
zoomHeight = new List <double>();
this.Disposed += (sender, e) =>
{
logo.StillLoading = false;
};
// Set linecaps for the pens.
footPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
bikePen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
carPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
busPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
otherPen.SetLineCap(LineCap.Round, LineCap.Round, DashCap.Round);
}
/// <summary>
/// Returns a Point in pixel-coordinates from a Node with
/// geological coordinates. The Point is in coordinates for the
/// entire map so it should be converted to coordinates for the
/// specific tile that is drawn.
/// </summary>
private Point nodeToTilePoint(BBox box, Bitmap tile, Node node)
{
Coordinate c = new Coordinate(node.Longitude, node.Latitude);
Projection p = new Projection(box.Width, tile.Width, new Coordinate(box.XMin, box.YMax));
return p.CoordToPoint(c);
}
/// <summary>
/// Resizes the BBox box if zoomlevel is very low.
/// This is because when curves pass through a tile but no nodes
/// of that curve are in that tile the curve won't be drawn in that tile.
/// So on very low zoomlevels, we need to search wider to draw all
/// curves in a tile.
/// </summary>
private BBox getSearchBBox(BBox box, int zoomLevel)
{
if (zoomLevel == 1)
return BBox.getResizedBBox(box, 3);
if (zoomLevel == 0)
return BBox.getResizedBBox(box, 7);
return box;
}
/// <summary>
/// Draws all streets in "streetCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// Streets will only be drawn in certain zoomlevels.
/// </summary>
private void drawStreetCurves(BBox box, Bitmap tile, Curve[] streetCurves, int zoomLevel)
{
foreach (Curve streetCurve in streetCurves)
{
Pen pen = getPenFromCurveType(streetCurve.Type, zoomLevel);
if (pen != null)
{
drawStreet(box, tile, streetCurve, getPenFromCurveType(streetCurve.Type, zoomLevel));
}
}
}
/// <summary>
/// Draws the Curve "curve" with Pen "pen" on the Bitmap "tile",
/// where box represents the position and size
/// of the tile in geological coordinates.
/// </summary>
private void drawStreet(BBox box, Bitmap tile, Curve curve, Pen pen)
{
Point start = nodeToTilePoint(box, tile, new Node(box.XMin, box.YMax, 0));
Graphics gr = Graphics.FromImage(tile);
gr.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
Node startNode = graph.GetNode(curve[0]);
int index = 1;
while (startNode.Longitude == 0 && startNode.Latitude == 0)
{
startNode = graph.GetNode(curve[index]);
index++;
}
// it doesn't matter if pt2 is null at start
Point pt1 = nodeToTilePoint(box, tile, startNode), pt2;
for (int i = index; i < curve.AmountOfNodes; i++)
{
Node node = graph.GetNode(curve[i]);
if (node.Longitude != 0 && node.Latitude != 0)
{
pt2 = nodeToTilePoint(box, tile, node);
gr.DrawLine(pen, pt1.X - start.X, -pt1.Y + start.Y, pt2.X - start.X, -pt2.Y + start.Y);
pt1 = pt2;
}
}
}
/// <summary>
/// Draws a piece of land or building using Brush "brush"
/// on the Bitmap "tile", where box represents the position
/// and size of the tile in geological coordinates.
/// </summary>
private void drawLanduse(BBox box, Bitmap tile, Curve curve, Brush brush)
{
List<Point> polygonPoints = new List<Point>();
Point start = nodeToTilePoint(box, tile, new Node(box.XMin, box.YMax, 0));
Graphics gr = Graphics.FromImage(tile);
gr.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
for (int i = 0; i < curve.AmountOfNodes; i++)
{
Node node = graph.GetNode(curve[i]);
if (node.Longitude != 0 && node.Latitude != 0)
{
Point p = nodeToTilePoint(box, tile, node);
polygonPoints.Add(new Point(p.X - start.X, -p.Y + start.Y));
}
}
gr.FillPolygon(brush, polygonPoints.ToArray());
}
/// <summary>
/// Draws all landpieces in "landCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// </summary>
private void drawLandCurves(BBox box, Bitmap tile, Curve[] landCurves)
{
foreach (Curve landCurve in landCurves)
{
Brush brush = getBrushFromCurveType(landCurve.Type);
if (brush != null)
{
drawLanduse(box, tile, landCurve, brush);
}
}
}
public Curve[] GetLandsInBBox(BBox box)
{
Node[] curveNodes = GetLandNodesInBBox(box);
HashSet<Curve> set = new HashSet<Curve>();
foreach(Node n in curveNodes)
{
foreach (Curve curve in lands.Get(n.ID))
{
set.Add(curve);
}
}
List<Curve> res = new List<Curve>();
res.AddRange(set);
return res.ToArray();
}
public Location[] GetExtrasInBBox(BBox box)
{
List<Location> res = new List<Location>();
foreach (Location l in extras)
{
if (box.Contains(l.Longitude, l.Latitude))
res.Add(l);
}
return res.ToArray();
}
/// <summary>
/// Zooms in on point (x,y) on the screen with a factor of 'factor'.
/// If factor > 1, zooms in.
/// If factor < 1, zooms out.
/// </summary>
private void Zoom(int x, int y, float factor)
{
if (!lockZoom)
{
//return if you already have zoomed in to the max
if ((factor > 1) && (Renderer.GetZoomLevel(LonFromX(0), LonFromX(bmpWidth), bmpWidth) < 1))
return;
Point upLeft = CoordToPoint(bounds.XMin, bounds.YMax);
double fracX = (double)x / this.Width;
double fracY = (double)y / this.Height;
double w = (int)(this.Width / factor);
double h = (int)(this.Height / factor);
int xMin = (int)(x - fracX * w);
int yMin = (int)(y - fracY * h);
int xMax = (int)(xMin + w);
int yMax = (int)(yMin + h);
Coordinate cUpLeft = PointToCoord(xMin + upLeft.X, upLeft.Y - yMin);
Coordinate cDownRight = PointToCoord(xMax + upLeft.X, upLeft.Y - yMax);
// When the user zooms in/out, the tiles on that zoomlevel are saved
// and there will be created a new list where new tiles will be added.
// When the user goes back to the old zoomLevel, the old tiles can be used again.
if (factor > 1) {
if (tileIndex - 1 >= 0) {
cDownRight = new Coordinate(cUpLeft.Longitude + zoomWidth[tileIndex - 1], cUpLeft.Latitude - zoomHeight[tileIndex - 1]);
}
else {
zoomWidth.Insert(0, Math.Abs(cUpLeft.Longitude - cDownRight.Longitude));
zoomHeight.Insert(0, Math.Abs(cUpLeft.Latitude - cDownRight.Latitude));
}
if (tileIndex > 0) {
tileIndex--;
}
else {
tiles.Insert(0, new List<Bitmap>());
tileCorners.Insert(0, new List<Point>());
tileIndexes.Insert(0, new SortedList<int, SortedList<int, int>>());
}
}
else {
tileIndex++;
if (tileIndex < zoomWidth.Count) {
cDownRight = new Coordinate(cUpLeft.Longitude + zoomWidth[tileIndex], cUpLeft.Latitude - zoomHeight[tileIndex]);
}
else {
zoomWidth.Insert(tileIndex, Math.Abs(cUpLeft.Longitude - cDownRight.Longitude));
zoomHeight.Insert(tileIndex, Math.Abs(cUpLeft.Latitude - cDownRight.Latitude));
}
if (tileIndex >= tiles.Count) {
tiles.Insert(tileIndex, new List<Bitmap>());
tileCorners.Insert(tileIndex, new List<Point>());
tileIndexes.Insert(tileIndex, new SortedList<int,SortedList<int,int>>());
}
}
bounds = new BBox(cUpLeft.Longitude, cUpLeft.Latitude, cDownRight.Longitude, cDownRight.Latitude);
forceUpdate = true;
this.DoUpdate();
}
}
public Node[] GetLandNodesInBBox(BBox box)
{
// Only search if we have data about this area
if(!box.IntersectWith(fileBounds))
return new Node[0];
List<Node> nds = new List<Node>();
int xStart = XBlock(box.XMin);
int xEnd = XBlock(box.XMax);
int yStart = YBlock(box.YMin);
int yEnd = YBlock(box.YMax);
if(xStart < 0)
xStart = 0;
if(xEnd >= horizontalGeoBlocks)
xEnd = horizontalGeoBlocks;
if(yStart < 0)
yStart = 0;
if(yEnd >= verticalGeoBlocks)
yEnd = verticalGeoBlocks;
for(int x = xStart; x <= xEnd; x++)
{
for(int y = yStart; y <= yEnd; y++)
{
if(landGeoBlocks[x, y] != null)
{
foreach (long id in landGeoBlocks[x, y])
{
Node nd = GetNode(id);
if (box.Contains(nd.Longitude, nd.Latitude))
{
nds.Add(nd);
}
}
}
}
}
return nds.ToArray();
}
/// <summary>
/// Creates a RouteFinder and a Renderer when needed.
/// Starts and stops the UpdateThread if needed.
/// </summary>
private void DoUpdate()
{
if (graph == null)
{
graph = loadingThread.Graph;
if (graph != null)
{
// Set bounds to filebounds.
BBox fileBounds = graph.FileBounds;
Point p1 = CoordToPoint(fileBounds.XMax, fileBounds.YMax);
Point p2 = CoordToPoint(fileBounds.XMin, fileBounds.YMin);
int w = Math.Abs(p1.X - p2.X);
int h = Math.Abs(p1.Y - p2.Y);
if ((float)h / w > (float)this.Height / this.Width)
{
this.bounds = new BBox(fileBounds.XMin, fileBounds.YMax, fileBounds.XMin + LonFromX(h), fileBounds.YMin);
}
else
{
this.bounds = new BBox(fileBounds.XMin, fileBounds.YMax, fileBounds.XMax,
fileBounds.YMax - LatFromY(LonToX(fileBounds.YMin) + h));
}
zoomWidth.Add(bounds.Width);
zoomHeight.Add(bounds.Height);
}
}
else
{
if (rf == null || render == null)
{
rf = new RouteFinder(graph);
render = new Renderer(graph);
loadingTimer.Stop();
logo.Stop();
this.Controls.Remove(logo);
updateThread.Start();
}
// If the updateThread is running and this method is called,
// just let the thread restart when it's finished the current tile.
if (forceUpdate && updateThread.ThreadState == ThreadState.Running)
{
restartUpdateThread = true;
forceUpdate = false;
}
// If the updateThread is stopped and this method is called,
// then just start the thread.
if (updateThread.ThreadState == ThreadState.Stopped)
{
updateThread = new Thread(new ThreadStart(this.UpdateTiles));
updateThread.Start();
}
this.Invalidate();
}
}
/// <summary>
/// Return true if the boundingbox intersects with "box".
/// </summary>
public bool IntersectWith(BBox box)
{
return box.Contains(xMin, yMin) || box.Contains(xMin, yMax) ||
box.Contains(xMax, yMin) || box.Contains(yMax, yMax) ||
this.Contains(box.XMin, box.YMin) || this.Contains(box.XMin, box.YMax) ||
this.Contains(box.XMax, box.YMin) || this.Contains(box.XMax, box.YMax);
}
/// <summary>
/// Returns true if the tileCorner with index 'id' is in the screen.
/// </summary>
private bool IsInScreen(int id)
{
if (id >= tileCorners[tileIndex].Count)
return false;
Coordinate c1 = PointToCoord(tileCorners[tileIndex][id].X, tileCorners[tileIndex][id].Y);
Coordinate c2 = PointToCoord(tileCorners[tileIndex][id].X + bmpWidth, tileCorners[tileIndex][id].Y + bmpHeight);
BBox box = new BBox(c1.Longitude, c1.Latitude, c2.Longitude, c2.Latitude);
return this.bounds.IntersectWith(box);
}
/// <summary>
/// Creates a RouteFinder and a Renderer when needed.
/// Starts and stops the UpdateThread if needed.
/// </summary>
private void DoUpdate()
{
if (graph == null)
{
graph = loadingThread.Graph;
if (graph != null)
{
// Set bounds to filebounds.
BBox fileBounds = graph.FileBounds;
Point p1 = CoordToPoint(fileBounds.XMax, fileBounds.YMax);
Point p2 = CoordToPoint(fileBounds.XMin, fileBounds.YMin);
int w = Math.Abs(p1.X - p2.X);
int h = Math.Abs(p1.Y - p2.Y);
if ((float)h / w > (float)this.Height / this.Width)
{
this.bounds = new BBox(fileBounds.XMin, fileBounds.YMax, fileBounds.XMin + LonFromX(h), fileBounds.YMin);
}
else
{
this.bounds = new BBox(fileBounds.XMin, fileBounds.YMax, fileBounds.XMax,
fileBounds.YMax - LatFromY(LonToX(fileBounds.YMin) + h));
}
zoomWidth.Add(bounds.Width);
zoomHeight.Add(bounds.Height);
}
}
else
{
if (rf == null || render == null)
{
rf = new RouteFinder(graph);
render = new Renderer(graph);
loadingTimer.Stop();
logo.Stop();
this.Controls.Remove(logo);
updateThread.Start();
}
// If the updateThread is running and this method is called,
// just let the thread restart when it's finished the current tile.
if (forceUpdate && updateThread.ThreadState == ThreadState.Running)
{
restartUpdateThread = true;
forceUpdate = false;
}
// If the updateThread is stopped and this method is called,
// then just start the thread.
if (updateThread.ThreadState == ThreadState.Stopped)
{
updateThread = new Thread(new ThreadStart(this.UpdateTiles));
updateThread.Start();
}
this.Invalidate();
}
}
/// <summary>
/// Draws a location on the map with Image "icon" on
/// the Bitmap "tile", where box represents the position
/// and size of the tile in geological coordinates.
/// </summary>
private void drawExtra(BBox box, Bitmap tile, Location location, Image icon)
{
Graphics gr = Graphics.FromImage(tile);
gr.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
Point start = nodeToTilePoint(box, tile, new Node(box.XMin, box.YMax, 0));
Point p = nodeToTilePoint(box, tile, location);
gr.DrawImage(icon, new Point(p.X - start.X, -p.Y + start.Y));
}
/// <summary>
/// Zooms in on point (x,y) on the screen with a factor of 'factor'.
/// If factor > 1, zooms in.
/// If factor < 1, zooms out.
/// </summary>
private void Zoom(int x, int y, float factor)
{
if (!lockZoom)
{
//return if you already have zoomed in to the max
if ((factor > 1) && (Renderer.GetZoomLevel(LonFromX(0), LonFromX(bmpWidth), bmpWidth) < 1))
{
return;
}
Point upLeft = CoordToPoint(bounds.XMin, bounds.YMax);
double fracX = (double)x / this.Width;
double fracY = (double)y / this.Height;
double w = (int)(this.Width / factor);
double h = (int)(this.Height / factor);
int xMin = (int)(x - fracX * w);
int yMin = (int)(y - fracY * h);
int xMax = (int)(xMin + w);
int yMax = (int)(yMin + h);
Coordinate cUpLeft = PointToCoord(xMin + upLeft.X, upLeft.Y - yMin);
Coordinate cDownRight = PointToCoord(xMax + upLeft.X, upLeft.Y - yMax);
// When the user zooms in/out, the tiles on that zoomlevel are saved
// and there will be created a new list where new tiles will be added.
// When the user goes back to the old zoomLevel, the old tiles can be used again.
if (factor > 1)
{
if (tileIndex - 1 >= 0)
{
cDownRight = new Coordinate(cUpLeft.Longitude + zoomWidth[tileIndex - 1], cUpLeft.Latitude - zoomHeight[tileIndex - 1]);
}
else
{
zoomWidth.Insert(0, Math.Abs(cUpLeft.Longitude - cDownRight.Longitude));
zoomHeight.Insert(0, Math.Abs(cUpLeft.Latitude - cDownRight.Latitude));
}
if (tileIndex > 0)
{
tileIndex--;
}
else
{
tiles.Insert(0, new List <Bitmap>());
tileCorners.Insert(0, new List <Point>());
tileIndexes.Insert(0, new SortedList <int, SortedList <int, int> >());
}
}
else
{
tileIndex++;
if (tileIndex < zoomWidth.Count)
{
cDownRight = new Coordinate(cUpLeft.Longitude + zoomWidth[tileIndex], cUpLeft.Latitude - zoomHeight[tileIndex]);
}
else
{
zoomWidth.Insert(tileIndex, Math.Abs(cUpLeft.Longitude - cDownRight.Longitude));
zoomHeight.Insert(tileIndex, Math.Abs(cUpLeft.Latitude - cDownRight.Latitude));
}
if (tileIndex >= tiles.Count)
{
tiles.Insert(tileIndex, new List <Bitmap>());
tileCorners.Insert(tileIndex, new List <Point>());
tileIndexes.Insert(tileIndex, new SortedList <int, SortedList <int, int> >());
}
}
bounds = new BBox(cUpLeft.Longitude, cUpLeft.Latitude, cDownRight.Longitude, cDownRight.Latitude);
forceUpdate = true;
this.DoUpdate();
}
}
/// <summary>
/// Draws all buildings in "buildingCurves" on Bitmap tile with box
/// containing the start and end point of the tile in geological coordinates.
/// </summary>
private void drawBuildingCurves(BBox box, Bitmap tile, Curve[] buildingCurves)
{
foreach (Curve buildingCurve in buildingCurves)
{
Brush brush = getBrushFromCurveType(buildingCurve.Type);
if (brush != null)
{
drawLanduse(box, tile, buildingCurve, brush);
}
}
}
