public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument)
{
var command = argument.Trim().ToLower();
switch (command)
{
case "start":
{
var shipControl = (ShipControlCommons)commons;
SetTarget(shipControl);
Start(shipControl, eventDriver);
SaveTarget(shipControl);
}
break;
case "reverse":
{
var shipControl = (ShipControlCommons)commons;
SetTarget(shipControl);
StartReverse(shipControl, eventDriver);
SaveTarget(shipControl);
}
break;
case "stop":
{
var shipControl = (ShipControlCommons)commons;
shipControl.Reset(gyroOverride: false);
Mode = IDLE;
ForgetTarget(shipControl);
}
break;
}
}
public void Init(ZACommons commons, EventDriver eventDriver)
{
var previous = commons.GetValue(LOSMinerKey);
if (previous != null)
{
var parts = previous.Split(';');
if (parts.Length == 13)
{
// Resume original mode and line-of-sight vector
var newMode = int.Parse(parts[0]);
StartPoint = new Vector3D();
StartDirection = new Vector3D();
StartUp = new Vector3D();
StartLeft = new Vector3D();
for (int i = 0; i < 3; i++)
{
StartPoint.SetDim(i, double.Parse(parts[i+1]));
StartDirection.SetDim(i, double.Parse(parts[i+4]));
StartUp.SetDim(i, double.Parse(parts[i+7]));
StartLeft.SetDim(i, double.Parse(parts[i+10]));
}
if (newMode == MINING)
{
Start((ShipControlCommons)commons, eventDriver);
}
else if (newMode == REVERSING)
{
StartReverse((ShipControlCommons)commons, eventDriver);
}
}
}
}
public void Demass(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
var deltaTime = (eventDriver.TimeSinceStart - InitialTime).TotalSeconds;
var launcherDelta = LauncherVelocity * deltaTime;
var distanceFromLauncher = (shipControl.ReferencePoint -
(InitialPosition + launcherDelta)).LengthSquared();
if (distanceFromLauncher < DemassDistance * DemassDistance)
{
// Not yet
eventDriver.Schedule(TicksPerRun, Demass);
return;
}
// Disable mass
var group = commons.GetBlockGroupWithName(MASS_GROUP);
if (group != null) ZACommons.EnableBlocks(group.Blocks, false);
// Start roll
shipControl.GyroControl.EnableOverride(true);
shipControl.GyroControl.SetAxisVelocity(GyroControl.Roll,
MathHelper.Pi);
// All done
if (PostLaunch != null) PostLaunch(commons, eventDriver);
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var myConnectors = ZACommons.GetBlocksOfType<IMyShipConnector>(commons.Blocks,
block => block.DefinitionDisplayNameText == "Connector" &&
((IMyShipConnector)block).IsLocked &&
((IMyShipConnector)block).IsConnected);
var currentConnectorCount = myConnectors.Count;
if (currentConnectorCount > ConnectorCount)
{
// New connection, force re-evaluation
State = null;
}
ConnectorCount = currentConnectorCount;
var myReactors = ZACommons.GetBlocksOfType<IMyReactor>(commons.Blocks,
block => block.IsWorking);
var currentState = myReactors.Count > 0;
// Only on state change
if (State == null || currentState != (bool)State)
{
State = currentState;
if (!(bool)State)
{
// Disable reactors on all connected grids
var reactors = ZACommons.GetBlocksOfType<IMyReactor>(commons.AllBlocks,
block => block.CubeGrid != commons.Me.CubeGrid);
reactors.ForEach(block => block.SetValue<bool>("OnOff", false));
}
}
eventDriver.Schedule(RunDelay, Run);
}
public void Init(ZACommons commons, EventDriver eventDriver,
double maxError,
Base6Directions.Direction thrusterDirection = Base6Directions.Direction.Forward)
{
MaxError = maxError;
ThrusterDirection = thrusterDirection;
var shipControl = (ShipControlCommons)commons;
var forward = shipControl.ShipBlockOrientation.TransformDirection(ThrusterDirection);
// Don't really care about "up," just pick a perpindicular direction
seeker.Init(shipControl,
shipUp: Base6Directions.GetPerpendicular(forward),
shipForward: forward);
var gyroControl = shipControl.GyroControl;
gyroControl.Reset();
gyroControl.EnableOverride(true);
LastPosition = shipControl.ReferencePoint;
Enabled = true;
shipControl.ThrustControl.Enable(false);
eventDriver.Schedule(SampleDelay, DetermineVelocity);
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var groups = commons.GetBlockGroupsWithPrefix(DOOR_AUTO_CLOSER_PREFIX);
if (groups.Count > 0)
{
groups.ForEach(group => {
// Determine open duration
var parts = group.Name.Split(new char[] { DURATION_DELIMITER }, 2);
var duration = DEFAULT_DOOR_OPEN_DURATION;
if (parts.Length == 2)
{
if (!double.TryParse(parts[1], out duration))
{
duration = DEFAULT_DOOR_OPEN_DURATION;
}
}
var doors = ZACommons.GetBlocksOfType<IMyDoor>(group.Blocks,
block => block.IsFunctional);
CloseDoors(commons, eventDriver, doors, duration);
});
}
else
{
// Default behavior (all doors except vanilla Airtight Hangar Doors and tagged doors)
var doors = ZACommons
.GetBlocksOfType<IMyDoor>(commons.Blocks,
block => block.IsFunctional &&
block.CustomName.IndexOf("[Excluded]", ZACommons.IGNORE_CASE) < 0 &&
block.DefinitionDisplayNameText != "Airtight Hangar Door");
CloseDoors(commons, eventDriver, doors, DEFAULT_DOOR_OPEN_DURATION);
}
eventDriver.Schedule(RunDelay, Run);
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var groups = commons.GetBlockGroupsWithPrefix(SIMPLE_AIRLOCK_GROUP_PREFIX);
for (var e = groups.GetEnumerator(); e.MoveNext();)
{
var doors = ZACommons.GetBlocksOfType<IMyDoor>(e.Current.Blocks,
door => door.CubeGrid == commons.Me.CubeGrid &&
door.IsFunctional);
var opened = IsAnyDoorOpen(doors);
for (var f = doors.GetEnumerator(); f.MoveNext();)
{
var door = (IMyDoor)f.Current;
if (door.OpenRatio == 0.0f && opened)
{
// This door is not open and some other door in the group is, lock it down
if (door.Enabled) door.SetValue<bool>("OnOff", false);
}
else
{
if (!door.Enabled) door.SetValue<bool>("OnOff", true);
}
}
}
eventDriver.Schedule(RunDelay, Run);
}
private void Reset(ZACommons commons)
{
var thrustControl = ((ShipControlCommons)commons).ThrustControl;
var collect = ParseCruiseFlags();
thrustControl.Enable(true, collect);
thrustControl.Reset(collect);
}
private void CloseDoors(ZACommons commons, EventDriver eventDriver, List<IMyTerminalBlock> doors,
double openDurationSeconds)
{
var openDuration = TimeSpan.FromSeconds(openDurationSeconds);
doors.ForEach(block => {
var door = (IMyDoor)block;
if (door.Open)
{
TimeSpan closeTime;
if (opened.TryGetValue(door, out closeTime))
{
if (closeTime <= eventDriver.TimeSinceStart)
{
// Time to close it
door.SetValue<bool>("Open", false);
opened.Remove(door);
}
}
else
{
opened.Add(door, eventDriver.TimeSinceStart + openDuration);
}
}
else
{
opened.Remove(door);
}
});
}
public void DockingAction(ZACommons commons, EventDriver eventDriver,
bool docked)
{
var wheels = ZACommons.GetBlocksOfType<IMyMotorSuspension>(commons.Blocks);
ZACommons.EnableBlocks(wheels, !docked);
if (!docked)
{
// Set suspension strength to configured value
wheels.ForEach(wheel =>
{
wheel.SetValue<float>("Strength", UNDOCK_SUSPENSION_STRENGTH);
});
}
else
{
// Apply handbrake
var controllers = ZACommons.GetBlocksOfType<IMyShipController>(commons.Blocks);
controllers.ForEach(controller =>
{
if (!((IMyShipController)controller).HandBrake)
{
controller.SetValue<bool>("HandBrake", true);
}
});
}
}
public void AcquireTarget(ZACommons commons)
{
// Find the sole text panel
var panelGroup = commons.GetBlockGroupWithName("CM Target");
if (panelGroup == null)
{
throw new Exception("Missing group: CM Target");
}
var panels = ZACommons.GetBlocksOfType<IMyTextPanel>(panelGroup.Blocks);
if (panels.Count == 0)
{
throw new Exception("Expecting at least 1 text panel");
}
var panel = panels[0] as IMyTextPanel; // Just use the first one
var targetString = panel.GetPublicText();
// Parse target info
var parts = targetString.Split(';');
if (parts.Length != 3)
{
throw new Exception("Expecting exactly 3 parts to target info");
}
Target = new Vector3D();
for (int i = 0; i < 3; i++)
{
Target.SetDim(i, double.Parse(parts[i]));
}
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
if (!AutopilotEngaged)
{
Reset(commons);
return;
}
var shipControl = (ShipControlCommons)commons;
var targetVector = AutopilotTarget - shipControl.ReferencePoint;
var distance = targetVector.Normalize();
double yawError, pitchError;
var gyroControl = seeker.Seek(shipControl, targetVector,
out yawError, out pitchError);
var targetSpeed = Math.Min(distance / AUTOPILOT_TTT_BUFFER,
AutopilotSpeed);
targetSpeed = Math.Max(targetSpeed, AUTOPILOT_MIN_SPEED); // Avoid Zeno's paradox...
cruiser.Cruise(shipControl, eventDriver, targetSpeed);
if (distance < AUTOPILOT_DISENGAGE_DISTANCE)
{
Reset(commons);
if (DoneAction != null) DoneAction(commons, eventDriver);
}
else
{
eventDriver.Schedule(FramesPerRun, Run);
}
}
// Acquire target from CM Target text panel. If anything's wrong,
// return null.
private Vector3D? AcquireTarget(ZACommons commons)
{
// Find the sole text panel
var panelGroup = commons.GetBlockGroupWithName("CM Target");
if (panelGroup == null) return null;
var panels = ZACommons.GetBlocksOfType<IMyTextPanel>(panelGroup.Blocks);
if (panels.Count == 0) return null;
var panel = panels[0] as IMyTextPanel; // Just use the first one
var targetString = panel.GetPublicText();
// Parse target info
var parts = targetString.Split(';');
if (parts.Length != 3) return null;
var target = new Vector3D();
for (int i = 0; i < 3; i++)
{
double coord;
if (!double.TryParse(parts[i], out coord)) return null;
target.SetDim(i, coord);
}
return target;
}
public void LowBattery(ZACommons commons, EventDriver eventDriver,
bool started)
{
if (started)
{
// Just change the name of the first active antenna
for (var e = ZACommons.GetBlocksOfType<IMyRadioAntenna>(commons.Blocks).GetEnumerator(); e.MoveNext();)
{
var antenna = e.Current;
if (antenna.IsFunctional && antenna.IsWorking)
{
OldAntennaName = antenna.CustomName;
antenna.SetCustomName(Message);
break;
}
}
}
else
{
// Scan for the antenna with the message, change it back
for (var e = ZACommons.GetBlocksOfType<IMyRadioAntenna>(commons.Blocks).GetEnumerator(); e.MoveNext();)
{
var antenna = e.Current;
if (antenna.CustomName == Message)
{
antenna.SetCustomName(OldAntennaName);
break;
}
}
}
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument, Action<ZACommons, Vector3D> targetAction)
{
argument = argument.Trim().ToLower();
switch (argument)
{
case "compute":
var firstReference = GetReference(commons, STATIC_REFERENCE_GROUP);
var rotorReference = GetReference(commons, ROTOR_REFERENCE_GROUP);
var first = new Rangefinder.LineSample(firstReference);
var second = new Rangefinder.LineSample(rotorReference);
Vector3D closestFirst, closestSecond;
if (Rangefinder.Compute(first, second, out closestFirst, out closestSecond))
{
// Take midpoint of closestFirst-closestSecond segment
var target = (closestFirst + closestSecond) / 2.0;
targetAction(commons, target);
}
break;
default:
rotorStepper.HandleCommand(commons, eventDriver, argument);
break;
}
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument)
{
argument = argument.Trim().ToLower();
var parts = argument.Split(new char[] { ' ' }, 3);
if (parts.Length < 3 || parts[0] != "sequence") return;
var command = parts[1];
var sequence = parts[2];
if (command == "start")
{
var blocks = GetSequenceBlocks(commons, sequence);
if (blocks == null) return;
ZACommons.EnableBlocks(blocks, false);
blocks[0].SetValue<bool>("OnOff", true);
var first = Indexes.Count == 0;
if (!Indexes.ContainsKey(sequence)) Indexes.Add(sequence, 0);
if (first)
{
eventDriver.Schedule(SEQUENCER_FRAMES_PER_RUN, Run);
}
}
else if (command == "stop")
{
var blocks = GetSequenceBlocks(commons, sequence);
if (blocks != null) ZACommons.EnableBlocks(blocks, true);
Indexes.Remove(sequence);
}
}
public void Prime(ZACommons commons, EventDriver eventDriver)
{
// Wake up batteries
var batteryGroup = commons.GetBlockGroupWithName(BATTERY_GROUP + MISSILE_GROUP_SUFFIX);
if (batteryGroup == null)
{
throw new Exception("Group missing: " + BATTERY_GROUP + MISSILE_GROUP_SUFFIX);
}
var systemsGroup = commons.GetBlockGroupWithName(SYSTEMS_GROUP + MISSILE_GROUP_SUFFIX);
if (systemsGroup == null)
{
throw new Exception("Group missing: " + SYSTEMS_GROUP + MISSILE_GROUP_SUFFIX);
}
var batteries = ZACommons.GetBlocksOfType<IMyBatteryBlock>(batteryGroup.Blocks);
batteries.ForEach(battery =>
{
battery.SetValue<bool>("OnOff", true);
battery.SetValue<bool>("Recharge", false);
battery.SetValue<bool>("Discharge", true);
});
// Activate flight systems
ZACommons.EnableBlocks(systemsGroup.Blocks, true);
eventDriver.Schedule(1.0, Release);
}
private void Start(ZACommons commons, EventDriver eventDriver, bool auto)
{
Show(commons);
if (Mode == IDLE) eventDriver.Schedule(RunDelay, Run);
Mode = auto ? AUTO : ACTIVE;
SaveMode(commons);
}
public void Display(ZACommons commons)
{
if (Indexes.Count > 0)
{
commons.Echo("Sequencer active: " + string.Join(", ", Indexes.Keys));
}
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var vents = ZACommons.GetBlocksOfType<IMyAirVent>(commons.AllBlocks,
vent => vent.IsFunctional &&
vent.CustomName.IndexOf("[Excluded]", ZACommons.IGNORE_CASE) < 0 &&
vent.CustomName.IndexOf("[Intake]", ZACommons.IGNORE_CASE) < 0);
vents.ForEach(block =>
{
var vent = (IMyAirVent)block;
var level = vent.GetOxygenLevel();
if (vent.IsDepressurizing && !vent.Enabled && level > 0.0f)
{
vent.SetValue<bool>("OnOff", true);
}
else if (!vent.IsDepressurizing)
{
if (level < MIN_AIR_VENT_PRESSURE && !vent.Enabled)
{
vent.SetValue<bool>("OnOff", true);
}
else if (level > MAX_AIR_VENT_PRESSURE && vent.Enabled)
{
vent.SetValue<bool>("OnOff", false);
}
}
});
eventDriver.Schedule(RunDelay, Run);
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument)
{
argument = argument.Trim().ToLower();
var parts = argument.Split(new char[] { ' ' }, 2);
if (parts.Length != 2 || parts[0] != "damecon") return;
var command = parts[1];
switch (command)
{
case "reset":
case "stop":
commons.AllBlocks.ForEach(block => {
if (block.GetProperty("ShowOnHUD") != null) block.SetValue<bool>("ShowOnHUD", false);
});
ResetMode(commons);
break;
case "show":
Show(commons);
ResetMode(commons);
break;
case "start":
Start(commons, eventDriver, false);
break;
case "auto":
Start(commons, eventDriver, true);
break;
}
}
public void Init(ZACommons commons, EventDriver eventDriver,
params DockingHandler[] dockingHandlers)
{
DockingHandlers = dockingHandlers;
var docked = ZACommons.IsConnectedAnywhere(commons.Blocks);
ManageShip(commons, eventDriver, docked);
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
if (Indexes.Count == 0) return;
var newIndexes = new Dictionary<string, int>();
for (var e = Indexes.GetEnumerator(); e.MoveNext();)
{
var kv = e.Current;
var sequence = kv.Key;
var index = kv.Value;
var blocks = GetSequenceBlocks(commons, sequence);
if (blocks == null) continue;
ZACommons.EnableBlocks(blocks, false);
// TODO sort?
index++;
index %= blocks.Count;
blocks[index].SetValue<bool>("OnOff", true);
newIndexes.Add(sequence, index);
}
Indexes = newIndexes;
eventDriver.Schedule(SEQUENCER_FRAMES_PER_RUN, Run);
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument)
{
var command = argument.Trim().ToLower();
switch (command)
{
case "reactors":
{
// Turn on all reactors
GetAllReactors(commons).ForEach(block => block.SetValue<bool>("OnOff", true));
eventDriver.Schedule(1.0, (c,ed) => {
// Turn off all local batteries
GetBatteries(c).ForEach(block => block.SetValue<bool>("OnOff", false));
});
break;
}
case "batteries":
{
// Turn on all local batteries
// and disable recharge/discharge
GetBatteries(commons).ForEach(block =>
{
block.SetValue<bool>("OnOff", true);
block.SetValue<bool>("Recharge", false);
block.SetValue<bool>("Discharge", false);
});
eventDriver.Schedule(1.0, (c,ed) => {
// Turn off all reactors
GetAllReactors(c).ForEach(block => block.SetValue<bool>("OnOff", false));
});
break;
}
}
}
public void HandleCommand(ZACommons commons, string argument)
{
argument = argument.Trim().ToLower();
var parts = argument.Split(new char[] { ' ' }, 2);
if (parts.Length < 2 || parts[0] != "rfinder") return;
var command = parts[1];
switch(command)
{
case "origin":
{
var reference = GetReference(commons);
if (reference == null) return;
Origin = new Rangefinder.LineSample(reference);
Last = null;
Result.Clear();
break;
}
case "snapshot":
{
var reference = GetReference(commons);
if (reference == null) return;
var second = new Rangefinder.LineSample(reference);
Last = null;
Result.Clear();
Vector3D closestFirst, closestSecond;
if (Rangefinder.Compute(Origin, second, out closestFirst,
out closestSecond))
{
var target = (closestFirst + closestSecond) / 2.0;
Last = target;
Result.Append(string.Format("Target: {0:F2}, {1:F2}, {2:F2}",
target.GetDim(0),
target.GetDim(1),
target.GetDim(2)));
Result.Append('\n');
var targetVector = target - reference.GetPosition();
Result.Append(string.Format("Distance: {0} m", (ulong)(targetVector.Length() + 0.5)));
TargetAction(commons, target);
}
else
{
Result.Append("Parallel lines???");
}
break;
}
case "restore":
if (Last != null)
{
TargetAction(commons, (Vector3D)Last);
}
break;
}
}
private List<IMyTerminalBlock> GetSequenceBlocks(ZACommons commons,
string sequence)
{
var groupName = SEQUENCER_PREFIX + sequence;
var group = commons.GetBlockGroupWithName(groupName);
if (group == null || group.Blocks.Count == 0) return null;
return group.Blocks;
}
public void DHRun(ZACommons commons, EventDriver eventDriver)
{
if (IsDocked) return;
Run(commons);
eventDriver.Schedule(RunDelay, DHRun);
}
public void SafeMode(ZACommons commons, EventDriver eventDriver)
{
// Check after 1 second (let timer block's action take effect)
eventDriver.Schedule(1.0, (c,ed) =>
{
new EmergencyStop().SafeMode(c, ed);
});
}
public void Init(ZACommons commons, EventDriver eventDriver)
{
pid.Kp = RotorKp;
pid.Ki = RotorKi;
pid.Kd = RotorKd;
UpdateStepAmount(commons);
}
public void Init(ZACommons commons, EventDriver eventDriver,
Action<ZACommons, EventDriver> postLaunch = null)
{
PostLaunch = postLaunch;
InitialPosition = ((ShipControlCommons)commons).ReferencePoint;
InitialTime = eventDriver.TimeSinceStart;
eventDriver.Schedule(0.0, Prime);
}
private void AimRotorAtPoint(ZACommons commons, EventDriver eventDriver, RotorStepper stepper, Vector3D point, double sign)
{
var rotor = stepper.GetRotor(commons);
var offset = point;
// Convert to rotor's coordinate space
offset = Vector3D.TransformNormal(offset, MatrixD.Transpose(rotor.WorldMatrix));
// Why you backwards, Atan2?? Or rather, Keen's world coordinates...
var desiredAngle = Math.Atan2(-offset.X, offset.Z);
stepper.SetPoint = desiredAngle * sign;
stepper.Schedule(eventDriver);
}
public void Refresh(ZACommons commons, EventDriver eventDriver)
{
if (Mode == Modes.Idle)
{
RefreshInfo = null;
return;
}
// Refresh all local PBs, but don't update gyro lock info
TargetUpdated(commons, eventDriver, (MyDetectedEntityInfo)RefreshInfo, full: true, localOnly: true, updateTime: RefreshUpdateTime, newOffset: false);
eventDriver.Schedule(TRACKER_REFRESH_RATE, Refresh);
}
public void Tick(ZACommons commons, EventDriver eventDriver)
{
// Enable all manageable air vents for 1 tick before performing checks.
// Necessary as of 1.185. Thanks, Keen!
var vents = GetAirVents(commons);
vents.ForEach(vent =>
{
vent.Enabled = true;
});
eventDriver.Schedule(1, Tock);
}
private void ConstrainSetPoint(ZACommons commons)
{
var piston = GetPiston(commons);
if (SetPoint < piston.MinLimit)
{
SetPoint = piston.MinLimit;
}
else if (SetPoint > piston.MaxLimit)
{
SetPoint = piston.MaxLimit;
}
}
public void DockingAction(ZACommons commons, EventDriver eventDriver,
bool docked)
{
if (docked)
{
IsDocked = true;
}
else if (IsDocked)
{
IsDocked = false;
eventDriver.Schedule(RunDelay, DHRun);
}
}
public void Setup(List <IMyTerminalBlock> ship)
{
// First build map of defaults
var defaultItemStocksMap = new Dictionary <string, ItemStock>();
for (int i = 0; i < defaultItemStocks.Length; i++)
{
var itemStock = defaultItemStocks[i];
defaultItemStocksMap.Add(itemStock.SubtypeName, itemStock);
}
// Get assemblers
var assemblers = ZACommons.GetBlocksOfType <IMyAssembler>(ship);
var candidates = new LinkedList <IMyAssembler>();
// If anything has already been appropriately named, remove it from our map
for (var e = assemblers.GetEnumerator(); e.MoveNext();)
{
var assembler = (IMyAssembler)e.Current;
ItemStock target;
if (ItemStock.TryParse(assembler.CustomName, out target))
{
defaultItemStocksMap.Remove(target.SubtypeName);
}
else
{
// Otherwise add assembler as candidate for renaming
candidates.AddLast(assembler);
}
}
for (var e = defaultItemStocksMap.Values.GetEnumerator(); e.MoveNext() && candidates.First != null;)
{
var itemStock = e.Current;
// Get first candidate
var candidate = candidates.First.Value;
candidates.RemoveFirst();
// Rename appropriately
StringBuilder builder = new StringBuilder();
builder.Append(candidate.CustomName);
builder.Append(' ');
builder.Append(DelimiterStart);
builder.Append(itemStock.SubtypeName);
builder.Append(DelimiterAmount);
builder.Append(itemStock.Amount);
builder.Append(DelimiterEnd);
candidate.SetCustomName(builder);
}
}
public void Burn(ZACommons commons, EventDriver eventDriver)
{
if (ShouldAbort(commons, eventDriver, Modes.Burning, false))
{
return;
}
var shipControl = (ShipControlCommons)commons;
var controller = GetShipController(shipControl);
if (controller == null)
{
return;
}
var gravity = controller.GetNaturalGravity();
if (gravity.LengthSquared() > 0.0)
{
// Override gyro, disable "bottom" thrusters
shipControl.Reset(gyroOverride: true, thrusterEnable: true,
thrusterCondition: ThrusterCondition);
shipControl.ThrustControl.Enable(Base6Directions.GetFlippedDirection(BrakeDirection), false);
var down = shipControl.ShipBlockOrientation.TransformDirection(BrakeDirection);
seeker.Init(shipControl,
shipUp: Base6Directions.GetPerpendicular(down),
shipForward: down);
if (Autodrop)
{
// "forward" & "right"
var forward = Base6Directions.GetPerpendicular(BrakeDirection);
var right = Base6Directions.GetCross(forward, BrakeDirection);
// Actual orientations don't matter
// Just as long as they're planar & perpendicular to down
LongCruiser.Init(shipControl, localForward: forward);
LatCruiser.Init(shipControl, localForward: right);
}
Mode = Modes.Gliding;
eventDriver.Schedule(FramesPerRun, Glide);
}
else
{
cruiser.Cruise(shipControl, VTVLHELPER_BURN_SPEED,
condition: ThrusterCondition);
eventDriver.Schedule(FramesPerRun, Burn);
}
}
public void Run(ZACommons commons)
{
for (var e = commons.GetBlockGroupsWithPrefix(REDUNDANCY_PREFIX).GetEnumerator(); e.MoveNext();)
{
var group = e.Current;
// Figure out how many to maintain
var parts = group.Name.Split(new char[] { COUNT_DELIMITER }, 2);
var count = 1;
if (parts.Length == 2)
{
if (int.TryParse(parts[1], out count))
{
count = Math.Max(count, 1);
}
else
{
count = 1;
}
}
var running = 0;
var spares = new LinkedList <IMyTerminalBlock>();
for (var f = group.Blocks.GetEnumerator(); f.MoveNext();)
{
var block = f.Current as IMyFunctionalBlock;
if (block != null && block.CubeGrid == commons.Me.CubeGrid &&
block.IsFunctional)
{
if (block.IsWorking && block.Enabled)
{
running++;
}
else
{
spares.AddLast(block);
}
}
}
while (running < count && spares.First != null)
{
var block = spares.First.Value;
spares.RemoveFirst();
block.SetValue <bool>("OnOff", true);
running++;
}
}
}
public void Init(ZACommons commons, EventDriver eventDriver,
Action <ZACommons, EventDriver> nextStage)
{
NextStage = nextStage;
OneTurnEnd = eventDriver.TimeSinceStart + TimeSpan.FromSeconds(ONE_TURN_DURATION);
var shipControl = (ShipControlCommons)commons;
seeker.Init(shipControl,
shipUp: shipControl.ShipUp,
shipForward: shipControl.ShipForward);
eventDriver.Schedule(0, Run);
}
public void Init(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
var gyroControl = shipControl.GyroControl;
gyroControl.Reset();
gyroControl.EnableOverride(true);
Active = true;
SaveActive(commons);
MaxPower = null; // Use first-run initialization
CurrentMaxPower = 0.0f;
eventDriver.Schedule(0.0, Run);
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver, string argument)
{
argument = argument.Trim().ToLower();
switch (argument)
{
case "arm":
if (Mode == Modes.Idle)
{
var camera = GetMainCamera(commons);
camera.EnableRaycast = true;
Mode = Modes.Armed;
RaycastRange = INITIAL_RAYCAST_RANGE;
}
break;
case "disarm":
{
var camera = GetMainCamera(commons);
camera.EnableRaycast = false;
Mode = Modes.Idle;
break;
}
case "snapshot":
BeginSnapshot(commons, eventDriver, localOnly: true);
break;
case "retarget":
BeginSnapshot(commons, eventDriver, localOnly: false);
break;
case "paint":
BeginPaint(commons, eventDriver, released: false);
break;
case "release":
BeginPaint(commons, eventDriver, released: true);
break;
case "clear":
{
if (Mode != Modes.Idle)
{
Mode = Modes.Armed;
RaycastRange = INITIAL_RAYCAST_RANGE;
}
break;
}
}
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
for (var e = commons.GetBlockGroupsWithPrefix(DOCKING_ACTION_PREFIX).GetEnumerator(); e.MoveNext();)
{
var group = e.Current;
// Figure out action
var parts = group.Name.Split(new char[] { ACTION_DELIMETER }, 2);
string action = "on";
if (parts.Length == 2)
{
action = parts[1];
}
// Determine state of first connector (should only have 1)
bool connected = false;
var connectors = ZACommons.GetBlocksOfType <IMyShipConnector>(group.Blocks);
if (connectors.Count > 0)
{
var connector = (IMyShipConnector)connectors[0];
connected = connector.IsLocked && connector.IsConnected;
}
if ("on".Equals(action, ZACommons.IGNORE_CASE) ||
"off".Equals(action, ZACommons.IGNORE_CASE))
{
bool enable;
if ("on".Equals(action, ZACommons.IGNORE_CASE))
{
enable = connected;
}
else
{
enable = !connected;
}
// Set state according to action
group.Blocks.ForEach(block =>
{
if (!(block is IMyShipConnector)) // ignore connectors
{
block.SetValue <bool>("OnOff", enable);
}
});
}
// Ignore anything else for now
}
eventDriver.Schedule(RunDelay, Run);
}
public SolarPanelDetails(IEnumerable <IMyTerminalBlock> blocks)
{
MaxPowerOutput = 0.0f;
DefinedPowerOutput = 0.0f;
foreach (var panel in ZACommons.GetBlocksOfType <IMySolarPanel>(blocks))
{
if (panel.IsFunctional && panel.IsWorking)
{
MaxPowerOutput += panel.MaxOutput;
DefinedPowerOutput += panel.CubeGrid.GridSize == 2.5f ? SOLAR_PANEL_MAX_POWER_LARGE : SOLAR_PANEL_MAX_POWER_SMALL;
}
}
}
private void KickTimer(ZACommons commons)
{
IMyTimerBlock timer = null;
// Name takes priority over group
if (TimerName != null)
{
var blocks = ZACommons.SearchBlocksOfName(commons.Blocks, TimerName,
block => block is IMyTimerBlock &&
((IMyTimerBlock)block).Enabled);
if (blocks.Count > 0)
{
timer = blocks[0] as IMyTimerBlock;
}
}
if (timer == null && TimerGroup != null)
{
var group = commons.GetBlockGroupWithName(TimerGroup);
if (group != null)
{
var blocks = ZACommons.GetBlocksOfType <IMyTimerBlock>(group.Blocks,
block => block.CubeGrid == commons.Me.CubeGrid &&
((IMyTimerBlock)block).Enabled);
timer = blocks.Count > 0 ? (IMyTimerBlock)blocks[0] : null;
}
}
if (timer != null)
{
// Rules are simple. If we have something in the tick queue, trigger now.
// Otherwise, set timer delay appropriately (minimum 1 second) and kick.
// If you want sub-second accuracy, always use ticks.
if (TickQueue.First != null)
{
timer.ApplyAction("TriggerNow");
}
else if (TimeQueue.First != null)
{
var next = (float)(TimeQueue.First.Value.When.TotalSeconds - TimeSinceStart.TotalSeconds);
// Constrain appropriately (not sure if this will be done for us or if it
// will just throw). Just do it to be safe.
next = Math.Max(next, timer.GetMinimum <float>("TriggerDelay"));
next = Math.Min(next, timer.GetMaximum <float>("TriggerDelay"));
timer.SetValue <float>("TriggerDelay", next);
timer.ApplyAction("Start");
}
// NB If both queues are empty, we stop running
}
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
foreach (var group in commons.GetBlockGroupsWithPrefix(DOCKING_ACTION_PREFIX))
{
// Figure out action
var parts = group.Name.Split(new char[] { ACTION_DELIMETER }, 2);
string action = "on";
if (parts.Length == 2)
{
action = parts[1];
}
// Determine state of first connector (should only have 1)
bool connected = false;
var connectors = ZACommons.GetBlocksOfType <IMyShipConnector>(group.Blocks);
if (connectors.Count > 0)
{
var connector = connectors[0];
connected = connector.Status == MyShipConnectorStatus.Connected;
}
if ("on".Equals(action, ZACommons.IGNORE_CASE) ||
"off".Equals(action, ZACommons.IGNORE_CASE))
{
bool enable;
if ("on".Equals(action, ZACommons.IGNORE_CASE))
{
enable = connected;
}
else
{
enable = !connected;
}
// Set state according to action
group.Blocks.ForEach(block =>
{
if (!(block is IMyShipConnector) && // ignore connectors
block is IMyFunctionalBlock)
{
((IMyFunctionalBlock)block).Enabled = enable;
}
});
}
// Ignore anything else for now
}
eventDriver.Schedule(RunDelay, Run);
}
private void OpenCloseDoorsAsNeeded(EventDriver eventDriver)
{
for (var e = rooms.GetEnumerator(); e.MoveNext();)
{
var room = e.Current;
var vents = ToVents(ZACommons.GetBlocksOfType <IMyAirVent>(room.Blocks));
if (vents.Count == 0)
{
continue;
}
var doors = ToDoors(ZACommons.GetBlocksOfType <IMyDoor>(room.Blocks));
if (doors.Count == 0)
{
continue;
}
// Determine room state
var state = GetAirlockState(vents);
switch (state)
{
case AIRLOCK_STATE_VACUUM:
// Close and lock all but space doors
CloseDoorsAsNeeded(eventDriver, room, doors, spaceDoors,
AIRLOCK_STATE_VACUUM);
break;
case AIRLOCK_STATE_PRESSURIZED:
// Close and lock all but inner doors
CloseDoorsAsNeeded(eventDriver, room, doors, innerDoors,
AIRLOCK_STATE_PRESSURIZED);
break;
case AIRLOCK_STATE_UNKNOWN:
// Close and lock all doors
for (var f = doors.GetEnumerator(); f.MoveNext();)
{
var door = f.Current;
door.SetValue <bool>("Open", false);
if (door.OpenRatio == 0.0f && door.Enabled)
{
door.SetValue <bool>("OnOff", false);
}
}
break;
}
}
}
private void CruiseStart(ZACommons commons, EventDriver eventDriver, double desiredSpeed, string argument)
{
TargetSpeed = Math.Max(desiredSpeed, 0.0);
thrustPID.Reset();
if (!Active)
{
SaveThrusterStates(commons);
Active = true;
eventDriver.Schedule(0, Run);
}
SaveLastCommand(commons, argument);
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
var controller = shipControl.ShipController;
if (controller != null)
{
var speed = controller.GetShipSpeed();
DoActions(commons, eventDriver, speed);
LastSpeed = (double)speed;
}
eventDriver.Schedule(RunDelay, Run);
}
public void Docked(ZACommons commons, EventDriver eventDriver)
{
ZACommons.ForEachBlockOfType <IMyLandingGear>(commons.Blocks,
gear =>
{
if (gear.IsFunctional && gear.IsWorking &&
gear.Enabled && !gear.IsLocked)
{
gear.ApplyAction("Lock");
}
});
// Do everything else needed after docking
ManageShip(commons, eventDriver, true);
}
public void Init(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
var target = AcquireTarget(commons);
// Use current distance from target point, otherwise use default range
var range = target != null ?
((Vector3D)target - shipControl.ReferencePoint).Length() :
DefaultRange;
// Target point is directly in front
Target = shipControl.ReferencePoint + shipControl.ReferenceForward * range;
dumbShell.Init(commons, eventDriver, postLaunch: DecoyLoop);
}
public void ReorientStart(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
seeker.Init(shipControl,
shipUp: shipControl.ShipUp,
shipForward: shipControl.ShipForward);
shipControl.Reset(gyroOverride: true, thrusterEnable: null);
Mode = Modes.Orienting;
SaveMode(commons);
eventDriver.Schedule(0, Reorient);
}
public void Init(ZACommons commons, EventDriver eventDriver,
Func <ZACommons, EventDriver, bool> livenessCheck = null)
{
LivenessCheck = livenessCheck;
var lastCommand = commons.GetValue(LastCommandKey);
if (lastCommand != null)
{
HandleCommand(commons, eventDriver, lastCommand);
// Can't trust current state, force a reset on "cruise stop"
ThrusterStates.Clear();
FirstStop = true;
}
}
public void FullBurn(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
// Full burn
var thrustControl = shipControl.ThrustControl;
thrustControl.SetOverride(Base6Directions.Direction.Forward, true);
// And disable thrusters in all other directions
thrustControl.Enable(Base6Directions.Direction.Backward, false);
thrustControl.Enable(Base6Directions.Direction.Up, false);
thrustControl.Enable(Base6Directions.Direction.Down, false);
thrustControl.Enable(Base6Directions.Direction.Left, false);
thrustControl.Enable(Base6Directions.Direction.Right, false);
}
private void BeginLock(ZACommons commons, EventDriver eventDriver)
{
if (Mode != Modes.Painting)
{
return;
}
if (!GyroLock)
{
var shipControl = (ShipControlCommons)commons;
shipControl.GyroControl.EnableOverride(true);
GyroLock = true;
eventDriver.Schedule(1, Lock);
}
}
public void Init(ZACommons commons, EventDriver eventDriver)
{
var shipControl = (ShipControlCommons)commons;
seeker.Init(shipControl,
shipUp: shipControl.ShipUp,
shipForward: shipControl.ShipForward);
cruiser.Init(shipControl);
velocimeter.Reset();
VTicks = 0;
FullBurnTriggerLast = eventDriver.TimeSinceStart;
eventDriver.Schedule(0, Run);
}
public void Snapshot(ZACommons commons, EventDriver eventDriver)
{
if (Mode != Modes.Snapshot)
{
return;
}
var camera = GetSightingCamera(commons);
if (camera == null)
{
Mode = Modes.Idle;
return;
}
// Can we raycast the desired distance?
var scanTime = camera.TimeUntilScan(FC_INITIAL_RAYCAST_RANGE);
if (scanTime > 0)
{
// Try later
eventDriver.Schedule((double)scanTime / 1000.0, Snapshot);
return;
}
var info = camera.Raycast(FC_INITIAL_RAYCAST_RANGE);
if (info.IsEmpty())
{
// Missed? Try again
eventDriver.Schedule(1, Snapshot);
return;
}
TargetAimPoint = (Vector3D)info.HitPosition;
TargetVelocity = new Vector3D(info.Velocity);
LastTargetUpdate = eventDriver.TimeSinceStart;
TargetID = info.EntityId;
// Determine local offset of aim point, in case we get an update
var offset = TargetAimPoint - info.Position;
var toLocal = MatrixD.Transpose(info.Orientation);
TargetOffset = Vector3D.TransformNormal(offset, toLocal);
BeginLock(commons, eventDriver);
}
public void Run(ZACommons commons)
{
foreach (var group in commons.GetBlockGroupsWithPrefix(REDUNDANCY_PREFIX))
{
// Figure out how many to maintain
var parts = group.Name.Split(new char[] { COUNT_DELIMITER }, 2);
var count = 1;
if (parts.Length == 2)
{
if (int.TryParse(parts[1], out count))
{
count = Math.Max(count, 1);
}
else
{
count = 1;
}
}
var running = 0;
var spares = new LinkedList <IMyFunctionalBlock>();
foreach (var block in group.Blocks)
{
var fblock = block as IMyFunctionalBlock;
if (fblock != null && fblock.CubeGrid == commons.Me.CubeGrid &&
fblock.IsFunctional)
{
if (fblock.IsWorking && fblock.Enabled)
{
running++;
}
else
{
spares.AddLast(fblock);
}
}
}
while (running < count && spares.First != null)
{
var block = spares.First.Value;
spares.RemoveFirst();
block.Enabled = true;
running++;
}
}
}
public void HandleCommand(ZACommons commons, EventDriver eventDriver,
string argument)
{
var command = argument.Trim().ToLower();
switch (command)
{
case "dock":
DockStart(commons, eventDriver);
break;
case "undock":
UndockStart(commons, eventDriver);
break;
}
}
public void Run(ZACommons commons, EventDriver eventDriver)
{
var groups = commons.GetBlockGroupsWithPrefix(REFINERY_MANAGER_PREFIX);
if (groups.Count > 0)
{
groups.ForEach(group => Balance(commons, group.Blocks));
}
else
{
// Balance all refineries
Balance(commons, commons.Blocks);
}
eventDriver.Schedule(RunDelay, Run);
}
private IMyCubeBlock GetReference(ZACommons commons, string groupName)
{
var group = commons.GetBlockGroupWithName(groupName);
if (group == null)
{
throw new Exception("Missing group: " + groupName);
}
var controllers = ZACommons.GetBlocksOfType <IMyShipController>(group.Blocks);
if (controllers.Count == 0)
{
throw new Exception("Expecting at least 1 ship controller in " + groupName);
}
return(controllers[0]);
}
