/// <summary>
/// Inserts a member (part/Subassembly or 3D model) in assembly and returns the created occurance
/// </summary>
/// <param name="assy"></param>
/// <param name="inventor">inventor assembly</param>
/// <param name="member">any of the supported <see cref="Document"/> types to insert into assembly</param>
/// <param name="position">position of the member relative to assembly's origin</param>
/// <param name="rotation">rotation about the X and Y and Z axis</param>
/// <returns><see cref="ComponentOccurrence"/> that is created inside the assembly</returns>
/// <remarks>remeber that Inventors internal units for length are centimeters</remarks>
public static ComponentOccurrence AddMemeber(this AssemblyDocument assy, Application inventor, Document member, double[] position, double[] rotation)
{
if (member.DocumentType == DocumentTypeEnum.kDrawingDocumentObject ||
member.DocumentType == DocumentTypeEnum.kNoDocument ||
member.DocumentType == DocumentTypeEnum.kPresentationDocumentObject ||
member.DocumentType == DocumentTypeEnum.kUnknownDocumentObject)
{
throw new ArgumentException("documnet type is not supported", nameof(member));
}
if (member.FullFileName == "")
{
throw new Exception("FullFileName of the part object was null, you need to save the part before passing to this method");
}
if (position.Length > 3 || rotation.Length > 3)
{
throw new ArgumentOutOfRangeException("position or rotaion array cannot have more than three memebers");
}
// Set a reference to the assembly component definition.
AssemblyComponentDefinition oAsmCompDef = assy.ComponentDefinition;
// Set a reference to the transient geometry object.
TransientGeometry oTG = inventor.TransientGeometry;
// Create a matrix. A new matrix is initialized with an identity matrix.
Matrix tempMatrix = oTG.CreateMatrix();
Matrix transMatrix = oTG.CreateMatrix();
//for all rotational directions . . .
for (int i = 0; i < rotation.Length; i++)
{
var index = new List <int>(new[] { 0, 0, 0 });
index[i] = 1;
var origin = oTG.CreatePoint(0, 0, 0);
//rotate about an axis that goeas through origin point and is along the rotaional direction
tempMatrix.SetToRotation(MathHelper.ToRadian(rotation[i]), oTG.CreateVector(index[0], index[1], index[2]), origin);
transMatrix.TransformBy(tempMatrix);
tempMatrix.SetToIdentity();
}
//move the object to the position
transMatrix.SetTranslation(oTG.CreateVector(position[0], position[1], position[2]));
// Add the occurrence.
return(oAsmCompDef.Occurrences.Add(member.FullFileName, transMatrix));
}
private void textBoxX_TextChanged(object sender, EventArgs e)
{
double XTranform = 0;
try
{
XTranform = Convert.ToDouble(textBoxX.Text);
}
catch (Exception)
{
if (textBoxX.Text.Length > 0 && !textBoxX.Text.Equals("-"))
{
MessageBox.Show("warning, incorrect input");
}
}
oTranslationMatrix.SetTranslation(oTG.CreateVector(XTranform, UCS.Transformation.Translation.Y, UCS.Transformation.Translation.Z));
UCS.Definition.Transformation = oTranslationMatrix;
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Set position of a GraphicsNode
//
//////////////////////////////////////////////////////////////////////////////////////////////
void SetNodePosition(GraphicsNode node, Point position)
{
Matrix transfo = node.Transformation;
Vector Tx = _Tg.CreateVector(
position.X, position.Y, position.Z);
transfo.SetTranslation(Tx, false);
node.Transformation = transfo;
}
static public Vector CV(double x = 0, double y = 0, double z = 0)
{
return(tg.CreateVector(x, y, z));
}
public void RunWithArguments(Document doc, NameValueMap map)
{
LogTrace("Initialiting");
PartDocument oPartDoc = (PartDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kPartDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject), true);
LogTrace("Part template opened");
TransientGeometry oTG = inventorApplication.TransientGeometry;
PartComponentDefinition oPartComDef = oPartDoc.ComponentDefinition;
UserParameters oParams = oPartComDef.Parameters.UserParameters;
XmlDocument xmlDoc = new XmlDocument();
string currentDir = System.IO.Directory.GetCurrentDirectory();
string projectDir = Directory.GetParent(currentDir).Parent.FullName;
LogTrace("Reading XML input file from " + projectDir);
xmlDoc.Load(System.IO.Path.Combine(projectDir, "react-test-output.xml"));
//xmlDoc.Load("react-test-output.xml");
//xmlDoc.Load("C:\\webapps\\IpartCreator\\React-BIM-output.xml");
XmlNodeList FloorList = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor");
XmlNodeList FloorPointList = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point");
XmlNodeList ComponentName = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/ComponentName");
XmlNodeList PointX = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/X");
XmlNodeList PointY = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/Y");
XmlNodeList PointZ = xmlDoc.DocumentElement.SelectNodes("/Building/Floors/Floor/BoundaryPoints/Point/Z");
for (int i = 0; i < FloorList.Count; i++)
{
//oParams.AddByExpression("ComponentName" + i, ComponentName[i].InnerText, UnitsTypeEnum.kUnitlessUnits);
int numPoint = FloorPointList.Count / FloorList.Count;
Point2d[] oPoints = new Point2d[numPoint];
SketchPoint[] osPoints = new SketchPoint[numPoint];
for (int j = 0; j < numPoint; j++)
{
oParams.AddByExpression("PointX" + j, PointX[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("PointY" + j, PointY[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("PointZ" + j, PointZ[j].InnerText, UnitsTypeEnum.kMillimeterLengthUnits);
oPoints[j] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("PointX" + j, UnitsTypeEnum.kMillimeterLengthUnits), oPartComDef.Parameters.GetValueFromExpression("PointY" + j, UnitsTypeEnum.kMillimeterLengthUnits));
}
SketchLine[] oLines = new SketchLine[numPoint];
PlanarSketch oSketch = oPartComDef.Sketches.Add(oPartComDef.WorkPlanes[2]);
osPoints[0] = oSketch.SketchPoints.Add(oPoints[0]);
osPoints[1] = oSketch.SketchPoints.Add(oPoints[1]);
osPoints[2] = oSketch.SketchPoints.Add(oPoints[2]);
osPoints[3] = oSketch.SketchPoints.Add(oPoints[3]);
oLines[0] = oSketch.SketchLines.AddByTwoPoints(osPoints[0], osPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, osPoints[2]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, osPoints[3]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oLines[0].StartSketchPoint);
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[0], osPoints[1], DimensionOrientationEnum.kAlignedDim, oPoints[1]); //d0//
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[1], osPoints[2], DimensionOrientationEnum.kAlignedDim, oPoints[3]); //d1//
Profile oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = oPartComDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(oPartComDef.Parameters.UserParameters.AddByExpression("length", "8", UnitsTypeEnum.kMillimeterLengthUnits), PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = oPartComDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
string PartPath = projectDir + "/results/" + ComponentName[i].InnerText + i + ".ipt";
//string PartPath = ComponentName[i].InnerText + i + ".ipt";
oPartDoc.SaveAs(PartPath, false);
oExtrude.Delete();
}
oPartDoc.Close(false);
AssemblyDocument oAssyDoc = (AssemblyDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kAssemblyDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kAssemblyDocumentObject), true);
AssemblyComponentDefinition oAssyComDef = oAssyDoc.ComponentDefinition;
ComponentOccurrences oAssyCompOccs = oAssyComDef.Occurrences;
Matrix oPos = oTG.CreateMatrix();
int oStep = 0;
int icomp;
int numite = FloorPointList.Count / FloorList.Count;
for (icomp = 0; icomp <= numite; icomp++)
{
oStep = oStep + 150;
oPos.SetTranslation(oTG.CreateVector(oStep, oStep, 0), false);
string PartPath = projectDir + "/results/" + ComponentName[icomp].InnerText + icomp + ".ipt";
//string PartPath = ComponentName[icomp].InnerText + icomp + ".ipt";
ComponentOccurrence oOcc = oAssyCompOccs.Add(PartPath, oPos);
}
oAssyDoc.SaveAs(projectDir + "/results/result.iam", false);
//oAssyDoc.SaveAs("result.iam", false);
oAssyDoc.Close();
ZipFile.CreateFromDirectory(projectDir + "/results", projectDir + "/forgeResult.zip");
}
static public void StandartTest()
{
// Set Inventor Application and "activate it"
TrAddInServer.MApp = null;
inventordoc = null;
// Enable error handling.
TransientBRep oTransBRep = TrAddInServer.MApp.TransientBRep;
SurfaceBodyDefinition oSurfaceBodyDef = oTransBRep.CreateSurfaceBodyDefinition();
TransientGeometry oTG = TrAddInServer.MApp.TransientGeometry;
LumpDefinition oLumpDef = oSurfaceBodyDef.LumpDefinitions.Add();
FaceShellDefinition oShell = oLumpDef.FaceShellDefinitions.Add();
// Define the six planes of the box.
Plane oPosX;
Plane oNegX;
Plane oPosY;
Plane oNegY;
Plane oPosZ;
Plane oNegZ;
oPosX = oTG.CreatePlane(oTG.CreatePoint(1, 0, 0), oTG.CreateVector(1, 0, 0));
oNegX = oTG.CreatePlane(oTG.CreatePoint(-1, 0, 0), oTG.CreateVector(-1, 0, 0));
oPosY = oTG.CreatePlane(oTG.CreatePoint(0, 1, 0), oTG.CreateVector(0, 1, 0));
oNegY = oTG.CreatePlane(oTG.CreatePoint(0, -1, 0), oTG.CreateVector(0, -1, 0));
oPosZ = oTG.CreatePlane(oTG.CreatePoint(0, 0, 1), oTG.CreateVector(0, 0, 1));
oNegZ = oTG.CreatePlane(oTG.CreatePoint(0, 0, -1), oTG.CreateVector(0, 0, -1));
// Create the six faces.
FaceDefinition oFaceDefPosX;
FaceDefinition oFaceDefNegX;
FaceDefinition oFaceDefPosY;
FaceDefinition oFaceDefNegY;
FaceDefinition oFaceDefPosZ;
FaceDefinition oFaceDefNegZ;
oFaceDefPosX = oShell.FaceDefinitions.Add(oPosX, false);
oFaceDefNegX = oShell.FaceDefinitions.Add(oNegX, false);
oFaceDefPosY = oShell.FaceDefinitions.Add(oPosY, false);
oFaceDefNegY = oShell.FaceDefinitions.Add(oNegY, false);
oFaceDefPosZ = oShell.FaceDefinitions.Add(oPosZ, false);
oFaceDefNegZ = oShell.FaceDefinitions.Add(oNegZ, false);
// Create the vertices.
VertexDefinition oVertex1;
VertexDefinition oVertex2;
VertexDefinition oVertex3;
VertexDefinition oVertex4;
VertexDefinition oVertex5;
VertexDefinition oVertex6;
VertexDefinition oVertex7;
VertexDefinition oVertex8;
oVertex1 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, 1, 1));
oVertex2 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, 1, -1));
oVertex3 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, 1, -1));
oVertex4 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, 1, 1));
oVertex5 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, -1, 1));
oVertex6 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, -1, -1));
oVertex7 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, -1, -1));
oVertex8 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, -1, 1));
// Define the edges at intersections of the defined planes.
EdgeDefinition oEdgeDefPosXPosY;
EdgeDefinition oEdgeDefPosXNegZ;
EdgeDefinition oEdgeDefPosXNegY;
EdgeDefinition oEdgeDefPosXPosZ;
EdgeDefinition oEdgeDefNegXPosY;
EdgeDefinition oEdgeDefNegXNegZ;
EdgeDefinition oEdgeDefNegXNegY;
EdgeDefinition oEdgeDefNegXPosZ;
EdgeDefinition oEdgeDefPosYNegZ;
EdgeDefinition oEdgeDefPosYPosZ;
EdgeDefinition oEdgeDefNegYNegZ;
EdgeDefinition oEdgeDefNegYPosZ;
oEdgeDefPosXPosY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex1, oVertex2, oTG.CreateLineSegment(oVertex1.Position, oVertex2.Position));
oEdgeDefPosXNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex2, oVertex6, oTG.CreateLineSegment(oVertex2.Position, oVertex6.Position));
oEdgeDefPosXNegY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex6, oVertex5, oTG.CreateLineSegment(oVertex6.Position, oVertex5.Position));
oEdgeDefPosXPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex5, oVertex1, oTG.CreateLineSegment(oVertex5.Position, oVertex1.Position));
oEdgeDefNegXPosY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex4, oVertex3, oTG.CreateLineSegment(oVertex4.Position, oVertex3.Position));
oEdgeDefNegXNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex3, oVertex7, oTG.CreateLineSegment(oVertex3.Position, oVertex7.Position));
oEdgeDefNegXNegY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex7, oVertex8, oTG.CreateLineSegment(oVertex7.Position, oVertex8.Position));
oEdgeDefNegXPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex8, oVertex4, oTG.CreateLineSegment(oVertex8.Position, oVertex4.Position));
oEdgeDefPosYNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex2, oVertex3, oTG.CreateLineSegment(oVertex2.Position, oVertex3.Position));
oEdgeDefPosYPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex4, oVertex1, oTG.CreateLineSegment(oVertex4.Position, oVertex1.Position));
oEdgeDefNegYNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex7, oVertex6, oTG.CreateLineSegment(oVertex7.Position, oVertex6.Position));
oEdgeDefNegYPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex5, oVertex8, oTG.CreateLineSegment(oVertex5.Position, oVertex8.Position));
// Define the loops on the faces.
EdgeLoopDefinition oPosXLoop = oFaceDefPosX.EdgeLoopDefinitions.Add();
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosY, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegZ, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegY, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosZ, true);
EdgeLoopDefinition oNegXLoop = oFaceDefNegX.EdgeLoopDefinitions.Add();
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosY, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegZ, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegY, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosZ, false);
EdgeLoopDefinition oPosYLoop = oFaceDefPosY.EdgeLoopDefinitions.Add();
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosY, false);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosYNegZ, false);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosY, true);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosYPosZ, false);
EdgeLoopDefinition oNegYLoop = oFaceDefNegY.EdgeLoopDefinitions.Add();
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegY, false);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegYPosZ, false);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegY, true);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegYNegZ, false);
EdgeLoopDefinition oPosZLoop = oFaceDefPosZ.EdgeLoopDefinitions.Add();
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosZ, true);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefNegYPosZ, true);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosZ, false);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefPosYPosZ, true);
EdgeLoopDefinition oNegZLoop = oFaceDefNegZ.EdgeLoopDefinitions.Add();
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegZ, true);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefNegYNegZ, true);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegZ, false);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefPosYNegZ, true);
//Create a transient surface body.
NameValueMap oErrors;
SurfaceBody oNewBody = oSurfaceBodyDef.CreateTransientSurfaceBody(out oErrors);
// Create client graphics to display the transient body.
PartDocument oDoc = (PartDocument)TrAddInServer.MApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oDef = oDoc.ComponentDefinition;
ClientGraphics oClientGraphics = oDef.ClientGraphicsCollection.Add("Sample3DGraphicsID");
// Create a new graphics node within the client graphics objects.
GraphicsNode oSurfacesNode = oClientGraphics.AddNode(1);
// Create client graphics based on the transient body
SurfaceGraphics oSurfaceGraphics = oSurfacesNode.AddSurfaceGraphics(oNewBody);
// Update the view.
TrAddInServer.MApp.ActiveView.Update();
}
public void RunWithArguments(Document doc, NameValueMap map)
{
//LogTrace("Processing " + doc.FullFileName);
//try
//{
// if (doc.DocumentType == DocumentTypeEnum.kPartDocumentObject)
// {
// using (new HeartBeat())
// {
// // TODO: handle the Inventor part here
// }
// }
// else if (doc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject) // Assembly.
// {
// using (new HeartBeat())
// {
// // TODO: handle the Inventor assembly here
// }
// }
//}
//catch (Exception e)
//{
// LogError("Processing failed. " + e.ToString());
//}
LogTrace("Initialiting");
PartDocument oPartDoc = (PartDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kPartDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject), true);
LogTrace("Part template opened");
TransientGeometry oTG = inventorApplication.TransientGeometry;
PartComponentDefinition oPartComDef = oPartDoc.ComponentDefinition;
UserParameters oParams = oPartComDef.Parameters.UserParameters;
oParams.AddByExpression("width", "50", UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("height", "10", UnitsTypeEnum.kMillimeterLengthUnits);
oParams.AddByExpression("length", "10", UnitsTypeEnum.kMillimeterLengthUnits);
LogTrace("Standard parameters created");
Point2d[] oPoints = new Point2d[4];
oPoints[0] = oTG.CreatePoint2d(0, 0);
oPoints[1] = oTG.CreatePoint2d(0, oPartComDef.Parameters.GetValueFromExpression("width", UnitsTypeEnum.kMillimeterLengthUnits));
oPoints[2] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("height", UnitsTypeEnum.kMillimeterLengthUnits), 0);
oPoints[3] = oTG.CreatePoint2d(oPartComDef.Parameters.GetValueFromExpression("height", UnitsTypeEnum.kMillimeterLengthUnits), oPartComDef.Parameters.GetValueFromExpression("width", UnitsTypeEnum.kMillimeterLengthUnits));
LogTrace("Inventor points created");
LogTrace("Initiating sketch creation...");
PlanarSketch oSketch = oPartComDef.Sketches.Add(oPartComDef.WorkPlanes[1]);
SketchPoint[] osPoints = new SketchPoint[4];
SketchLine[] oLines = new SketchLine[4];
osPoints[0] = oSketch.SketchPoints.Add(oPoints[0]);
osPoints[1] = oSketch.SketchPoints.Add(oPoints[1]);
osPoints[2] = oSketch.SketchPoints.Add(oPoints[2]);
osPoints[3] = oSketch.SketchPoints.Add(oPoints[3]);
oLines[0] = oSketch.SketchLines.AddByTwoPoints(osPoints[0], osPoints[1]);
oLines[1] = oSketch.SketchLines.AddByTwoPoints(oLines[0].EndSketchPoint, osPoints[3]);
oLines[2] = oSketch.SketchLines.AddByTwoPoints(oLines[1].EndSketchPoint, osPoints[2]);
oLines[3] = oSketch.SketchLines.AddByTwoPoints(oLines[2].EndSketchPoint, oLines[0].StartSketchPoint);
LogTrace("Sketch created, adding dimensions");
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[0], osPoints[1], DimensionOrientationEnum.kAlignedDim, oPoints[1]); //d0//
oSketch.DimensionConstraints.AddTwoPointDistance(osPoints[1], osPoints[3], DimensionOrientationEnum.kAlignedDim, oPoints[3]); //d1//
LogTrace("Dimensions added to the sketch, changing standard values for User parameter values");
var inventorMParams = oPartComDef.Parameters.ModelParameters;
foreach (ModelParameter mParam in inventorMParams)
{
if (mParam.Name.Contains("d0"))
{
mParam.Expression = "width";
}
else if (mParam.Name.Contains("d1"))
{
mParam.Expression = "height";
}
}
LogTrace("Dimensions with user parameter values created, starting extrude operation");
//oSketch.DimensionConstraints.AddTwoPointDistance(oPoints[0], oPoints[1], DimensionOrientationEnum.kAlignedDim, "width", true);
Profile oProfile = oSketch.Profiles.AddForSolid();
ExtrudeDefinition oExtrudeDef = oPartComDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudeDef.SetDistanceExtent(oPartComDef.Parameters.UserParameters.AddByExpression("length", "length", UnitsTypeEnum.kMillimeterLengthUnits), PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrude = oPartComDef.Features.ExtrudeFeatures.Add(oExtrudeDef);
//oExtrude.FeatureDimensions[1].Parameter.Name = "length";
LogTrace("Extrude operation finished");
XmlDocument xmlDoc = new XmlDocument();
string currentDir = System.IO.Directory.GetCurrentDirectory();
string projectDir = Directory.GetParent(currentDir).Parent.FullName;
LogTrace("Reading XML input file from " + projectDir);
xmlDoc.Load(System.IO.Path.Combine(projectDir, "React-BIM-output.xml"));
//xmlDoc.Load("C:\\webapps\\IpartCreator\\React-BIM-output.xml");
XmlNodeList memberNodeList = xmlDoc.GetElementsByTagName("Member");
XmlNodeList partNumberNodeList = xmlDoc.GetElementsByTagName("PartNumber");
XmlNodeList widthNodeList = xmlDoc.GetElementsByTagName("width");
XmlNodeList heightNodeList = xmlDoc.GetElementsByTagName("height");
XmlNodeList lengthNodeList = xmlDoc.GetElementsByTagName("length");
LogTrace("XML tag values imported");
LogTrace("Creating iPart");
iPartFactory oFactory = oPartComDef.CreateFactory();
Worksheet oWS = oFactory.ExcelWorkSheet;
Workbook oWB = (Workbook)oWS.Parent;
LogTrace("Generating Excel file for iPart");
oWS.Cells[1, 1] = "Member<defaultRow>1</defaultRow><filename></filename>";
oWS.Cells[1, 2] = "Part Number [Project]";
oWS.Cells[1, 3] = "width";
oWS.Cells[1, 4] = "height";
oWS.Cells[1, 5] = "length";
for (int i = 0; i < memberNodeList.Count; i++)
{
oWS.Cells[(i + 2), 1] = memberNodeList[i].InnerText;
oWS.Cells[(i + 2), 2] = partNumberNodeList[i].InnerText;
oWS.Cells[(i + 2), 3] = widthNodeList[i].InnerText;
oWS.Cells[(i + 2), 4] = heightNodeList[i].InnerText;
oWS.Cells[(i + 2), 5] = lengthNodeList[i].InnerText;
}
oWB.Save();
oWB.Close();
LogTrace("Excel created");
oPartDoc.Update();
string iPartPath = projectDir + "/results/bimipart.ipt";
int iNumRows = oFactory.TableRows.Count;
LogTrace("Saving iPart to " + iPartPath);
oPartDoc.SaveAs(iPartPath, false);
LogTrace("Opening new assembly template");
AssemblyDocument oAssyDoc = (AssemblyDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kAssemblyDocumentObject, inventorApplication.FileManager.GetTemplateFile(DocumentTypeEnum.kAssemblyDocumentObject), true);
AssemblyComponentDefinition oAssyComDef = oAssyDoc.ComponentDefinition;
ComponentOccurrences oAssyCompOccs = oAssyComDef.Occurrences;
LogTrace("Creating Matrix");
Matrix oPos = oTG.CreateMatrix();
int oStep = 0;
int iRow;
LogTrace("Placing iPart members to assembly");
for (iRow = 1; iRow <= iNumRows; iRow++)
{
oStep = oStep + 150;
oPos.SetTranslation(oTG.CreateVector(oStep, oStep, 0), false);
ComponentOccurrence oOcc = oAssyCompOccs.AddiPartMember(iPartPath, oPos, iRow);
}
string assyPath = projectDir + "/results/bimassy.iam";
LogTrace("Saving Assembly file to " + assyPath);
oAssyDoc.SaveAs(assyPath, false);
}