//////////////////////////////////////////////////////////////////////////////////////////////
// Draws dimension graphics
//
//////////////////////////////////////////////////////////////////////////////////////////////
DimData DrawDimension(Point point1, Point point2, Point dimText, Vector normal)
{
// Compute extension points
Vector xAxis = point1.VectorTo(point2);
Vector upVector = normal.CrossProduct(xAxis);
upVector.Normalize();
Plane plane = _Tg.CreatePlane(point1, normal);
Point dimTextProj = AdnInventorUtilities.ProjectOnPlane(dimText, plane);
double dotP1 = point1.VectorTo(dimTextProj).DotProduct(upVector);
double dotP2 = point2.VectorTo(dimTextProj).DotProduct(upVector);
Point extP1 = _Tg.CreatePoint(
point1.X + upVector.X * dotP1,
point1.Y + upVector.Y * dotP1,
point1.Z + upVector.Z * dotP1);
Point extP2 = _Tg.CreatePoint(
point2.X + upVector.X * dotP2,
point2.Y + upVector.Y * dotP2,
point2.Z + upVector.Z * dotP2);
double dimValue = extP1.DistanceTo(extP2);
GraphicsNode node = _clientGraphicsMng.CreateNewGraphicsNode();
LineGraphics extLine1 = _clientGraphicsMng.DrawLine(
AdnInventorUtilities.ToArray(point1),
AdnInventorUtilities.ToArray(extP1),
node);
LineGraphics extLine2 = _clientGraphicsMng.DrawLine(
AdnInventorUtilities.ToArray(point2),
AdnInventorUtilities.ToArray(extP2),
node);
LineGraphics dimLine = _clientGraphicsMng.DrawLine(
AdnInventorUtilities.ToArray(extP1),
AdnInventorUtilities.ToArray(extP2),
node);
extLine1.LineType = LineTypeEnum.kDashedLineType;
extLine2.LineType = LineTypeEnum.kDashedLineType;
UnitVector v = extP1.VectorTo(extP2).AsUnitVector();
double length = 20.0;
double radius = 7.0;
Point bottom1 = _Tg.CreatePoint(
extP1.X + length * v.X,
extP1.Y + length * v.Y,
extP1.Z + length * v.Z);
Point bottom2 = _Tg.CreatePoint(
extP2.X - length * v.X,
extP2.Y - length * v.Y,
extP2.Z - length * v.Z);
SurfaceBody cone1 = _TBrep.CreateSolidCylinderCone(
bottom1, extP1,
radius, radius, 0.0, null);
SurfaceBody cone2 = _TBrep.CreateSolidCylinderCone(
bottom2, extP2,
radius, radius, 0.0, null);
GraphicsNode dimNode = _clientGraphicsMng.CreateNewGraphicsNode();
SurfaceGraphics arrow1 = _clientGraphicsMng.DrawSurface(cone1, dimNode);
SurfaceGraphics arrow2 = _clientGraphicsMng.DrawSurface(cone2, dimNode);
arrow1.SetTransformBehavior(extP1,
DisplayTransformBehaviorEnum.kPixelScaling,
1.0);
arrow2.SetTransformBehavior(extP2,
DisplayTransformBehaviorEnum.kPixelScaling,
1.0);
TextGraphics text = _clientGraphicsMng.DrawText(
AdnInventorUtilities.GetStringFromAPILength(dimValue),
false,
dimNode);
text.Font = "Arial";
text.Bold = false;
text.Italic = false;
text.FontSize = 20;
text.PutTextColor(221, 0, 0);
text.VerticalAlignment = VerticalTextAlignmentEnum.kAlignTextMiddle;
text.HorizontalAlignment = HorizontalTextAlignmentEnum.kAlignTextLeft;
Point txtPos = _Tg.CreatePoint(
(extP1.X + extP2.X) * 0.5,
(extP1.Y + extP2.Y) * 0.5,
(extP1.Z + extP2.Z) * 0.5);
text.Anchor = txtPos;
text.SetTransformBehavior(txtPos,
DisplayTransformBehaviorEnum.kFrontFacingAndPixelScaling,
1.0);
node.Selectable = true;
dimNode.Selectable = true;
return(new DimData(point1, point2, extLine1, extLine2, dimLine, dimNode));
}
static public void StandartTest()
{
// Set Inventor Application and "activate it"
TrAddInServer.MApp = null;
inventordoc = null;
// Enable error handling.
TransientBRep oTransBRep = TrAddInServer.MApp.TransientBRep;
SurfaceBodyDefinition oSurfaceBodyDef = oTransBRep.CreateSurfaceBodyDefinition();
TransientGeometry oTG = TrAddInServer.MApp.TransientGeometry;
LumpDefinition oLumpDef = oSurfaceBodyDef.LumpDefinitions.Add();
FaceShellDefinition oShell = oLumpDef.FaceShellDefinitions.Add();
// Define the six planes of the box.
Plane oPosX;
Plane oNegX;
Plane oPosY;
Plane oNegY;
Plane oPosZ;
Plane oNegZ;
oPosX = oTG.CreatePlane(oTG.CreatePoint(1, 0, 0), oTG.CreateVector(1, 0, 0));
oNegX = oTG.CreatePlane(oTG.CreatePoint(-1, 0, 0), oTG.CreateVector(-1, 0, 0));
oPosY = oTG.CreatePlane(oTG.CreatePoint(0, 1, 0), oTG.CreateVector(0, 1, 0));
oNegY = oTG.CreatePlane(oTG.CreatePoint(0, -1, 0), oTG.CreateVector(0, -1, 0));
oPosZ = oTG.CreatePlane(oTG.CreatePoint(0, 0, 1), oTG.CreateVector(0, 0, 1));
oNegZ = oTG.CreatePlane(oTG.CreatePoint(0, 0, -1), oTG.CreateVector(0, 0, -1));
// Create the six faces.
FaceDefinition oFaceDefPosX;
FaceDefinition oFaceDefNegX;
FaceDefinition oFaceDefPosY;
FaceDefinition oFaceDefNegY;
FaceDefinition oFaceDefPosZ;
FaceDefinition oFaceDefNegZ;
oFaceDefPosX = oShell.FaceDefinitions.Add(oPosX, false);
oFaceDefNegX = oShell.FaceDefinitions.Add(oNegX, false);
oFaceDefPosY = oShell.FaceDefinitions.Add(oPosY, false);
oFaceDefNegY = oShell.FaceDefinitions.Add(oNegY, false);
oFaceDefPosZ = oShell.FaceDefinitions.Add(oPosZ, false);
oFaceDefNegZ = oShell.FaceDefinitions.Add(oNegZ, false);
// Create the vertices.
VertexDefinition oVertex1;
VertexDefinition oVertex2;
VertexDefinition oVertex3;
VertexDefinition oVertex4;
VertexDefinition oVertex5;
VertexDefinition oVertex6;
VertexDefinition oVertex7;
VertexDefinition oVertex8;
oVertex1 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, 1, 1));
oVertex2 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, 1, -1));
oVertex3 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, 1, -1));
oVertex4 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, 1, 1));
oVertex5 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, -1, 1));
oVertex6 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(1, -1, -1));
oVertex7 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, -1, -1));
oVertex8 = oSurfaceBodyDef.VertexDefinitions.Add(oTG.CreatePoint(-1, -1, 1));
// Define the edges at intersections of the defined planes.
EdgeDefinition oEdgeDefPosXPosY;
EdgeDefinition oEdgeDefPosXNegZ;
EdgeDefinition oEdgeDefPosXNegY;
EdgeDefinition oEdgeDefPosXPosZ;
EdgeDefinition oEdgeDefNegXPosY;
EdgeDefinition oEdgeDefNegXNegZ;
EdgeDefinition oEdgeDefNegXNegY;
EdgeDefinition oEdgeDefNegXPosZ;
EdgeDefinition oEdgeDefPosYNegZ;
EdgeDefinition oEdgeDefPosYPosZ;
EdgeDefinition oEdgeDefNegYNegZ;
EdgeDefinition oEdgeDefNegYPosZ;
oEdgeDefPosXPosY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex1, oVertex2, oTG.CreateLineSegment(oVertex1.Position, oVertex2.Position));
oEdgeDefPosXNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex2, oVertex6, oTG.CreateLineSegment(oVertex2.Position, oVertex6.Position));
oEdgeDefPosXNegY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex6, oVertex5, oTG.CreateLineSegment(oVertex6.Position, oVertex5.Position));
oEdgeDefPosXPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex5, oVertex1, oTG.CreateLineSegment(oVertex5.Position, oVertex1.Position));
oEdgeDefNegXPosY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex4, oVertex3, oTG.CreateLineSegment(oVertex4.Position, oVertex3.Position));
oEdgeDefNegXNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex3, oVertex7, oTG.CreateLineSegment(oVertex3.Position, oVertex7.Position));
oEdgeDefNegXNegY = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex7, oVertex8, oTG.CreateLineSegment(oVertex7.Position, oVertex8.Position));
oEdgeDefNegXPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex8, oVertex4, oTG.CreateLineSegment(oVertex8.Position, oVertex4.Position));
oEdgeDefPosYNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex2, oVertex3, oTG.CreateLineSegment(oVertex2.Position, oVertex3.Position));
oEdgeDefPosYPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex4, oVertex1, oTG.CreateLineSegment(oVertex4.Position, oVertex1.Position));
oEdgeDefNegYNegZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex7, oVertex6, oTG.CreateLineSegment(oVertex7.Position, oVertex6.Position));
oEdgeDefNegYPosZ = oSurfaceBodyDef.EdgeDefinitions.Add(oVertex5, oVertex8, oTG.CreateLineSegment(oVertex5.Position, oVertex8.Position));
// Define the loops on the faces.
EdgeLoopDefinition oPosXLoop = oFaceDefPosX.EdgeLoopDefinitions.Add();
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosY, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegZ, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegY, true);
oPosXLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosZ, true);
EdgeLoopDefinition oNegXLoop = oFaceDefNegX.EdgeLoopDefinitions.Add();
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosY, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegZ, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegY, false);
oNegXLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosZ, false);
EdgeLoopDefinition oPosYLoop = oFaceDefPosY.EdgeLoopDefinitions.Add();
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosY, false);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosYNegZ, false);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosY, true);
oPosYLoop.EdgeUseDefinitions.Add(oEdgeDefPosYPosZ, false);
EdgeLoopDefinition oNegYLoop = oFaceDefNegY.EdgeLoopDefinitions.Add();
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegY, false);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegYPosZ, false);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegY, true);
oNegYLoop.EdgeUseDefinitions.Add(oEdgeDefNegYNegZ, false);
EdgeLoopDefinition oPosZLoop = oFaceDefPosZ.EdgeLoopDefinitions.Add();
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefNegXPosZ, true);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefNegYPosZ, true);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefPosXPosZ, false);
oPosZLoop.EdgeUseDefinitions.Add(oEdgeDefPosYPosZ, true);
EdgeLoopDefinition oNegZLoop = oFaceDefNegZ.EdgeLoopDefinitions.Add();
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefNegXNegZ, true);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefNegYNegZ, true);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefPosXNegZ, false);
oNegZLoop.EdgeUseDefinitions.Add(oEdgeDefPosYNegZ, true);
//Create a transient surface body.
NameValueMap oErrors;
SurfaceBody oNewBody = oSurfaceBodyDef.CreateTransientSurfaceBody(out oErrors);
// Create client graphics to display the transient body.
PartDocument oDoc = (PartDocument)TrAddInServer.MApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oDef = oDoc.ComponentDefinition;
ClientGraphics oClientGraphics = oDef.ClientGraphicsCollection.Add("Sample3DGraphicsID");
// Create a new graphics node within the client graphics objects.
GraphicsNode oSurfacesNode = oClientGraphics.AddNode(1);
// Create client graphics based on the transient body
SurfaceGraphics oSurfaceGraphics = oSurfacesNode.AddSurfaceGraphics(oNewBody);
// Update the view.
TrAddInServer.MApp.ActiveView.Update();
}