double GetFrontXCoord(double zz)
{
Line Ruler = new Line(new Point3d(0, 0, zz), new Point3d(1, 0, zz));
Point3dCollection pts = new Point3dCollection();
foreach (Line fl in new List <Line> {
FrontA, FrontC
})
{
pts.Clear();
Ruler.IntersectWith(fl, Intersect.ExtendThis, pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count != 0)
{
return(pts[0].X);
}
}
foreach (Arc fl in new List <Arc> {
FrontB, FrontD, FrontE
})
{
pts.Clear();
Ruler.IntersectWith(fl, Intersect.ExtendThis, pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count != 0)
{
return(pts[0].X);
}
}
return(0);
}
double GetBackXCoord(double zz)
{
Line Ruler = new Line(new Point3d(0, 0, zz), new Point3d(1, 0, zz));
Point3dCollection pts = new Point3dCollection();
pts.Clear();
Ruler.IntersectWith(BackLineA, Intersect.ExtendThis, pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count != 0)
{
return(pts[0].X);
}
else
{
pts.Clear();
Ruler.IntersectWith(BackLineB, Intersect.ExtendThis, pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count != 0)
{
return(pts[0].X);
}
else
{
pts.Clear();
Ruler.IntersectWith(BackLineC, Intersect.ExtendThis, pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count != 0)
{
return(pts[0].X);
}
else
{
return(0);
}
}
}
}
public void CutLine(Entity ent1, Entity ent2, List <Line> listLines)
{
Point3dCollection pt3dColl = new Point3dCollection();
Point3d[] ptArr1 = new Point3d[3];
Point3d[] ptArr2 = new Point3d[3];
//listLines[0].IntersectWith(ent1, Intersect.OnBothOperands,pt3dColl,IntPtr.Zero,IntPtr.Zero);
//ptArr1[0] = pt3dColl[0];
//pt3dColl.Clear();
listLines[1].IntersectWith(ent1, Intersect.OnBothOperands, pt3dColl, IntPtr.Zero, IntPtr.Zero);
ptArr1[1] = pt3dColl[0];
pt3dColl.Clear();
listLines[2].IntersectWith(ent1, Intersect.OnBothOperands, pt3dColl, IntPtr.Zero, IntPtr.Zero);
ptArr1[2] = pt3dColl[0];
pt3dColl.Clear();
////////////////////////
//listLines[0].IntersectWith(ent2, Intersect.OnBothOperands, pt3dColl, IntPtr.Zero, IntPtr.Zero);
//ptArr2[0] = pt3dColl[0];
//pt3dColl.Clear();
listLines[1].IntersectWith(ent2, Intersect.OnBothOperands, pt3dColl, IntPtr.Zero, IntPtr.Zero);
ptArr2[1] = pt3dColl[0];
pt3dColl.Clear();
listLines[2].IntersectWith(ent2, Intersect.OnBothOperands, pt3dColl, IntPtr.Zero, IntPtr.Zero);
ptArr2[2] = pt3dColl[0];
pt3dColl.Clear();
//Line line1 = new Line(ptArr1[0], ptArr2[0]);
Line line2 = new Line(ptArr1[1], ptArr2[1]);
Line line3 = new Line(ptArr1[2], ptArr2[2]);
List <Entity> list = new List <Entity>();
list.Add(listLines[0]);
list.Add(line2);
list.Add(line3);
ObjectId layer1 = AddLayer(Db, "ECD斜梁1", System.Drawing.Color.DeepPink);
ObjectId layer2 = AddLayer(Db, "ECD斜梁2", System.Drawing.Color.DeepPink);
line2.LayerId = layer1;
line3.LayerId = layer1;
list[0].LayerId = layer2;
list.ForEach(l => { l.Color = Color.FromColor(System.Drawing.Color.DeepPink); });
DBHelper.ToSpace(list);
listLines.ForEach(ll => ll.Dispose());
list.ForEach(lll => lll.Dispose());
}
public void Cleanup()
{
_vertices.Clear();
foreach (DBObject obj in _created)
{
obj.Dispose();
}
_created.Clear();
}
public static void Draw(Point3dCollection points, int deep, ref List<Entity> ents)
{
if (deep == 0)
{
DrawPolygon(points, ref ents);
return;
}
else
{
Point3dCollection middlePoints = CalculateMiddlePoints(points);
Point3dCollection aux = new Point3dCollection();
aux.Add( points[0] );
aux.Add( middlePoints[0] );
aux.Add( middlePoints[2] );
Draw(aux, deep-1, ref ents);
//
aux.Clear();
aux = new Point3dCollection();
aux.Add( middlePoints[0] );
aux.Add( points[1] );
aux.Add( middlePoints[1]);
Draw(aux, deep - 1, ref ents);
//
aux.Clear();
aux = new Point3dCollection();
aux.Add( middlePoints[2]);
aux.Add( middlePoints[1] );
aux.Add( points[2]);
Draw(aux, deep - 1, ref ents);
}
}
public void AddPolylines()
{
ClearTransients();
// Dispose of the database objects
foreach (DBObject obj in _lines)
{
obj.Dispose();
}
_lines.Clear();
// Create a true database-resident 3D polyline
// (and let it be green)
if (_vertices.Count > 1)
{
var btr =
(BlockTableRecord)_tr.GetObject(
_doc.Database.CurrentSpaceId,
OpenMode.ForWrite
);
var pl =
new Polyline3d(
Poly3dType.SimplePoly, _vertices, false
);
pl.ColorIndex = 3;
btr.AppendEntity(pl);
_tr.AddNewlyCreatedDBObject(pl, true);
}
_vertices.Clear();
}
protected override SamplerStatus SamplerData()
{
// Generate a point cloud
try
{
// Use a user-defined sampling the points for the jig
_vecs = GeneratePointCloud(Sampling);
// Extract the points for display in the jig
_points.Clear();
foreach (ColoredPoint3d vec in _vecs)
{
_points.Add(
new Point3d(vec.X, vec.Y, vec.Z)
);
}
}
catch {}
ForceMessage();
return(SamplerStatus.OK);
}
public static void PlotSideLine(Database db, Line AxisLine, Line StartLine, Line EndLine, double scale, bool isLeft = false)
{
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockTable blockTbl = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord modelSpace = tr.GetObject(blockTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
Point3dCollection pts = new Point3dCollection();
Point3d LimitA, LimitB;
StartLine.IntersectWith(AxisLine, Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
LimitA = pts[0];
pts.Clear();
EndLine.IntersectWith(AxisLine, Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
LimitB = pts[0];
Point3d st, ed;
double distA = Math.Abs(LimitA.DistanceTo(AxisLine.StartPoint));
double distB = Math.Abs(LimitB.DistanceTo(AxisLine.EndPoint));
int dir = LimitA.Y > AxisLine.StartPoint.Y ? 1 : -1;
int dirx = isLeft ? -1 : 1;
double kk = AxisLine.GetK();
for (int i = 0; i < distA / 2 / scale; i++)
{
double dy = i * 2 * scale * dir;
st = AxisLine.StartPoint.Convert3D(dy / kk, dy);
if (i % 2 == 0)
{
ed = st.Convert3D(dirx * 2 * scale, 0, 0);
}
else
{
ed = st.Convert3D(dirx * 4 * scale, 0, 0);
}
Line tmp = new Line(st, ed);
modelSpace.AppendEntity(tmp);
tr.AddNewlyCreatedDBObject(tmp, true);
}
for (int i = 0; i < distB / 2 / scale; i++)
{
double dy = -i * 2 * scale * dir;
st = AxisLine.EndPoint.Convert3D(dy / kk, dy);
if (i % 2 == 0)
{
ed = st.Convert3D(dirx * 2 * scale, 0, 0);
}
else
{
ed = st.Convert3D(dirx * 4 * scale, 0, 0);
}
Line tmp = new Line(st, ed);
tmp.Layer = "细线";
modelSpace.AppendEntity(tmp);
tr.AddNewlyCreatedDBObject(tmp, true);
}
tr.Commit();
}
}
public static Line CutByDoubleLine(this Line aline, Point2d minPoint, Point2d maxPoint, bool isInf = true)
{
Line res = (Line)aline.Clone();
Line A = new Line(minPoint.Convert3D(), minPoint.Convert3D(1));
Line B = new Line(maxPoint.Convert3D(), maxPoint.Convert3D(1));
Point3dCollection pts = new Point3dCollection();
pts.Clear();
aline.IntersectWith(A, Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
res.StartPoint = pts[0];
pts.Clear();
aline.IntersectWith(B, Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
res.EndPoint = pts[0];
return(res);
}
public static void RemoveDuplicate([NotNull] this Point3dCollection pts, Tolerance tol)
{
var ptsClean = RemoveDuplicate(pts.Cast <Point3d>().ToList(), tol);
pts.Clear();
foreach (var pt in ptsClean)
{
pts.Add(pt);
}
}
/// <summary>
/// Попадает ли точка внутрь полилинии.
/// Предполагается, что полилиния имеет замкнутый контур.
/// Подходит для полилиний с дуговыми сегментами.
/// Работает медленнее чем IsPointInsidePolygon(), примерно в 10 раз.
/// </summary>
/// <param name="pt"></param>
/// <param name="onIsInside">Если исходная точка лежит на полилинии, то считать, что она внутри или нет: True - внутри, False - снаружи.</param>
/// <param name="pl"></param>
/// <exception cref="Exceptions.ErrorException">Не удалось определить за несколько попыток.</exception>
public static bool IsPointInsidePolyline([NotNull] this Polyline pl, Point3d pt, bool onIsInside = false)
{
using (var ray = new Ray())
{
ray.BasePoint = pt;
var vec = new Vector3d(0, 1, pt.Z);
ray.SecondPoint = pt + vec;
using (var ptsIntersects = new Point3dCollection())
{
bool isContinue;
var isPtOnPolyline = false;
var countWhile = 0;
do
{
using (var plane = new Plane())
{
pl.IntersectWith(ray, Intersect.OnBothOperands, plane, ptsIntersects, IntPtr.Zero, IntPtr.Zero);
}
isContinue = ptsIntersects.Cast <Point3d>().Any(p =>
{
if (pt.IsEqualTo(p))
{
isPtOnPolyline = true;
return(true);
}
var param = pl.GetParameterAtPointTry(p);
return(Math.Abs(param % 1) < 0.0001);
});
if (isPtOnPolyline)
{
return(onIsInside);
}
if (isContinue)
{
vec = vec.RotateBy(0.01, Vector3d.ZAxis);
ray.SecondPoint = pt + vec;
ptsIntersects.Clear();
countWhile++;
if (countWhile > 3)
{
throw new ErrorException(new Errors.Error(
"Не определено попадает ли точка внутрь полилинии.",
pt.GetRectangleFromCenter(3), Matrix3d.Identity,
System.Drawing.SystemIcons.Error));
}
}
} while (isContinue);
return(NetLib.MathExt.IsOdd(ptsIntersects.Count));
}
}
}
public void cmdWillStart(object o, CommandEventArgs e)
{
if (e.GlobalCommandName == "MOVE")
{
//Set the global variables
bEditCommand = true;
bDoRepositioning = false;
//Delete all stored information
changedObjects.Clear();
employeePositions.Clear();
}
}
public void Cleanup()
{
if (_path != null)
{
_path.Dispose();
_path = null;
}
;
if (_profile != null)
{
_profile.Dispose();
_profile = null;
}
;
if (_tube != null)
{
_tube.Dispose();
_tube = null;
}
;
_sweepOpts = null;
_vertices.Clear();
}
protected override SamplerStatus Sampler(JigPrompts prompts)
{
// We don't really need a point, but we do need some
// user input event to allow us to loop, processing
// for the Kinect input
PromptPointResult ppr =
prompts.AcquirePoint("\nClick to capture: ");
if (ppr.Status == PromptStatus.OK)
{
if (Finished)
{
CancelJig();
return(SamplerStatus.Cancel);
}
// Generate a point cloud
try
{
// Use a user-defined sampling the points for the jig
_vecs = GeneratePointCloud(Sampling);
// Extract the points for display in the jig
_points.Clear();
foreach (ColoredPoint3d vec in _vecs)
{
_points.Add(
new Point3d(vec.X, vec.Y, vec.Z)
);
}
ForceMessage();
}
catch { }
return(SamplerStatus.OK);
}
return(SamplerStatus.Cancel);
}
public void IntersectionTest()
{
Editor m_ed = Application.DocumentManager.MdiActiveDocument.Editor;
Database m_db = HostApplicationServices.WorkingDatabase;
PromptEntityOptions m_peo = new PromptEntityOptions("\n请选择第一条曲线:");
PromptEntityResult m_per = m_ed.GetEntity(m_peo);
if (m_per.Status != PromptStatus.OK)
{
return;
}
ObjectId m_objid1 = m_per.ObjectId;
m_peo = new PromptEntityOptions("\n请选择第二条曲线:");
m_per = m_ed.GetEntity(m_peo);
if (m_per.Status != PromptStatus.OK)
{
return;
}
ObjectId m_objid2 = m_per.ObjectId;
using (Transaction m_tr = m_db.TransactionManager.StartTransaction())
{
Curve m_cur1 = (Curve)m_tr.GetObject(m_objid1, OpenMode.ForRead);
Curve m_cur2 = (Curve)m_tr.GetObject(m_objid2, OpenMode.ForRead);
Point3dCollection m_ints = new Point3dCollection();
m_cur1.IntersectWith(m_cur2, Intersect.OnBothOperands, new Plane(), m_ints, 0, 0); //得出的所有交点在c1曲线上
foreach (Point3d m_pt in m_ints)
{
m_ed.WriteMessage("\n第一条曲线与第二条曲线交点:{0}", m_pt);
}
m_ed.WriteMessage("\n===");
m_ints.Clear();
m_cur2.IntersectWith(m_cur1, Intersect.OnBothOperands, new Plane(), m_ints, 0, 0); //得出的所有交点在c2曲线上
foreach (Point3d m_pt in m_ints)
{
m_ed.WriteMessage("\n第二条曲线与第条曲线一交点:{0}", m_pt);
}
m_tr.Commit();
}
}
StretchPoints()
{
m_db = Utils.Db.GetCurDwg();
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
Point3dCollection pts = new Point3dCollection();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = m_db.TransactionManager;
while (true)
{
PromptEntityResult prEntRes = ed.GetEntity("\nSelect entity to show stretch points");
if (prEntRes.Status != PromptStatus.OK)
{
break;
}
using (Autodesk.AutoCAD.DatabaseServices.Transaction tr = tm.StartTransaction()) {
AcDb.Entity ent = (AcDb.Entity)tr.GetObject(prEntRes.ObjectId, OpenMode.ForRead);
pts.Clear(); // reset to no points each time through loop
ent.GetStretchPoints(pts);
if (pts.Count == 0)
{
Utils.AcadUi.PrintToCmdLine("\nNo stretch points specified!");
}
else
{
for (int i = 0; i < pts.Count; i++)
{
Utils.AcadUi.PrintToCmdLine(string.Format("\nSTRETCH[{0:d}]: {1}", i, Utils.AcadUi.PtToStr(pts[i])));
MakePointEnt(pts[i], 1, tr);
}
}
tr.Commit();
}
}
}
protected override SamplerStatus SamplerData()
{
// Generate a point cloud
try
{
// Use a user-defined sampling the points for the jig
var frame = _frameReader.AcquireLatestFrame();
ProcessMultiSourceFrame(frame);
_vecs = GeneratePointCloud(Sampling);
// Extract the points for display in the jig
_points.Clear();
if (_vecs != null)
{
foreach (var vec in _vecs)
{
_points.Add(
new Point3d(vec.X, vec.Y, vec.Z)
);
}
}
}
catch (System.Exception ex)
{
Application.DocumentManager.MdiActiveDocument.Editor.WriteMessage(
"\nException: {0}", ex.Message
);
}
ForceMessage();
return(SamplerStatus.OK);
}
public static void RemoveDuplicatePointFromPoint3DCollection(Point3dCollection source)
{
var result = new Point3dCollection();
foreach (Point3d point3D in source)
{
// Check duplicate
if (DetectDuplicatePoint(result, point3D))
{
continue;
}
result.Add(point3D);
}
// 如果个数不等的话：
if (result.Count != source.Count)
{
source.Clear();
foreach (Point3d point3D in result)
{
source.Add(point3D);
}
}
}
public string AddInfluencedTime(
int month,
int day,
double startTime,
double endTime,
double interval,
double angleSun,
double latitude,
double longitude,
double windowsDirection,
double windowsDownHeight,
double windowsUpHeight,
Line line,
Line influencedLine)
{
Point3d startPoint, endPoint;
startPoint = line.StartPoint;
endPoint = line.EndPoint;
List <double> influenceTime = new List <double>();
influenceTime.Clear();
List <string> influenceWay = new List <string>();
influenceWay.Clear();
//Dictionary<string,string> periodInfTimeTable = new Dictionary<string,string>;
bool influenceStart = false;
//ed.WriteMessage("start time : " + startTime + "\n");
//ed.WriteMessage("end time : " + endTime + "\n");
//interval = interval * 60;
for (double now = startTime; now <= endTime; now += interval)
{
double h0 = GetSolorHighPosition_rad(angleSun,
latitude, longitude, now);
double alpha = getAlphaPosition_rad(angleSun, latitude,
longitude, h0, now);
//ed.WriteMessage("Here1\n");
//ed.WriteMessage("Time: " + now +" h0 :" + rad2Angle(h0) + " alpha : " + rad2Angle(alpha) + "\n");
if (h0 <= 0 ||
(alpha + windowsDirection >= Math.PI / 2 && windowsDirection != Math.PI) ||
(alpha + windowsDirection <= -1 * Math.PI / 2 && windowsDirection != Math.PI) ||
(windowsDirection == Math.PI &&
(alpha + windowsDirection <= 1.50 * Math.PI) &&
(alpha + windowsDirection >= Math.PI / 2.0)
))
{
continue;
}
Point3d p1 = getReflectedLinePoint_rad(
startPoint,
windowsDownHeight,
h0,
alpha,
windowsDirection);
Point3d p2 = getReflectedLinePoint_rad(
startPoint,
windowsUpHeight,
h0,
alpha,
windowsDirection);
Point3d p3 = getReflectedLinePoint_rad(
endPoint,
windowsUpHeight,
h0,
alpha,
windowsDirection);
Point3d p4 = getReflectedLinePoint_rad(
endPoint,
windowsDownHeight,
h0,
alpha,
windowsDirection);
Point3dCollection points = new Point3dCollection();
points.Add(p1); points.Add(p2);
points.Add(p3); points.Add(p4);
//cadOperator.drawLine(new Line(p1, p2));
//cadOperator.drawLine(new Line(p2, p3));
//cadOperator.drawLine(new Line(p3, p4));
///////////////////
//PartialTimePeriod();
if (isLineInOrIntersectPolygons(points, influencedLine))
{
if (!influenceStart)
{
influenceTime.Add(now);
influenceStart = true;
influenceTime.Add(now);
}
else
{
influenceTime[influenceTime.Count - 1] = now;
}
}
else
{
if (influenceStart)
{
influenceTime[influenceTime.Count - 1] = now;
influenceStart = false;
}
}
points.Clear();
}
string influceceTimeString = "";
bool firstFlag = true;
FormServices formServices = new FormServices();
ed.WriteMessage("influence time count: " + influenceTime.Count + "\n");
for (int i = 0; i < influenceTime.Count(); i += 2)
{
double start, end;
start = influenceTime[i];
end = influenceTime[i + 1];
if (firstFlag)
{
firstFlag = false;
}
else
{
influceceTimeString += ",";
}
influceceTimeString += formServices.convertTimeDouble2String(start);
influceceTimeString += "-";
influceceTimeString += formServices.convertTimeDouble2String(end);
}
return(influceceTimeString);
}
BoundingBoxIntersectWith()
{
m_db = Utils.Db.GetCurDwg();
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
// get intersection type from user
PromptKeywordOptions prIntType = new PromptKeywordOptions("\nExtend objects");
prIntType.Keywords.Add("None");
prIntType.Keywords.Add("First");
prIntType.Keywords.Add("Second");
prIntType.Keywords.Add("Both");
PromptResult prIntTypeRes = ed.GetKeywords(prIntType);
if (prIntTypeRes.Status != PromptStatus.OK)
{
return;
}
//Intersect intType = Intersect.ExtendBoth;
//if (prIntTypeRes.StringResult == "None")
// intType = Intersect.OnBothOperands;
//else if (prIntTypeRes.StringResult == "First")
// intType = Intersect.ExtendThis;
//else if (prIntTypeRes.StringResult == "Second")
// intType = Intersect.ExtendArgument;
//else
// intType = Intersect.ExtendBoth;
PromptEntityOptions prEnt1 = new PromptEntityOptions("\nSelect first entity");
PromptEntityOptions prEnt2 = new PromptEntityOptions("\nSelect intersecting entity");
Point3dCollection pts = new Point3dCollection();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = m_db.TransactionManager;
while (true)
{
PromptEntityResult prEnt1Res = ed.GetEntity(prEnt1);
if (prEnt1Res.Status != PromptStatus.OK)
{
return;
}
PromptEntityResult prEnt2Res = ed.GetEntity(prEnt2);
if (prEnt2Res.Status != PromptStatus.OK)
{
return;
}
using (Autodesk.AutoCAD.DatabaseServices.Transaction tr = tm.StartTransaction()) {
AcDb.Entity ent1 = (AcDb.Entity)tr.GetObject(prEnt1Res.ObjectId, OpenMode.ForRead);
AcDb.Entity ent2 = (AcDb.Entity)tr.GetObject(prEnt2Res.ObjectId, OpenMode.ForRead);
MakeExtentsBlock(ent1.GeometricExtents);
pts.Clear();
//ent1.BoundingBoxIntersectWith(ent2, intType, pts, 0, 0); // TBD: Fix JMA
if (pts.Count == 0)
{
Utils.AcadUi.PrintToCmdLine("\nObjects do not intersect!");
}
else
{
for (int i = 0; i < pts.Count; i++)
{
Utils.AcadUi.PrintToCmdLine(string.Format("\nINTERSECT PT: {0}", Utils.AcadUi.PtToStr(pts[i])));
MakePointEnt(pts[i], 3, tr);
}
}
tr.Commit();
}
}
}
GripPoints()
{
m_db = Utils.Db.GetCurDwg();
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
Point3dCollection pts = new Point3dCollection();
IntegerCollection osnapModes = new IntegerCollection();
IntegerCollection geomIds = new IntegerCollection();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = m_db.TransactionManager;
while (true)
{
PromptEntityResult prEntRes = ed.GetEntity("\nSelect entity to show grip points");
if (prEntRes.Status != PromptStatus.OK)
{
break;
}
using (Autodesk.AutoCAD.DatabaseServices.Transaction tr = tm.StartTransaction()) {
AcDb.Entity ent = (AcDb.Entity)tr.GetObject(prEntRes.ObjectId, OpenMode.ForRead);
pts.Clear(); // reset to no points each time through loop
osnapModes.Clear();
geomIds.Clear();
//TBD: Throws a "Value cannot be null exception"
ent.GetGripPoints(pts, osnapModes, geomIds);
if (pts.Count == 0)
{
Utils.AcadUi.PrintToCmdLine("\nNo grip points specified!");
}
else
{
for (int i = 0; i < pts.Count; i++)
{
Utils.AcadUi.PrintToCmdLine(string.Format("\nGRIP[{0:d}]: {1}", i, Utils.AcadUi.PtToStr(pts[i])));
MakePointEnt(pts[i], 2, tr);
}
}
if (osnapModes.Count == 0)
{
Utils.AcadUi.PrintToCmdLine("\nNo osnap modes specified!");
}
else
{
for (int i = 0; i < osnapModes.Count; i++)
{
Utils.AcadUi.PrintToCmdLine(string.Format("\nOSNAP MODE[{0:d}]: {1}", i, osnapModes[i]));
}
}
if (geomIds.Count == 0)
{
Utils.AcadUi.PrintToCmdLine("\nNo geometry IDs specified!");
}
else
{
for (int i = 0; i < geomIds.Count; i++)
{
Utils.AcadUi.PrintToCmdLine(string.Format("\nGEOM ID[{0:d}]: {1}", i, geomIds[i].ToString()));
}
}
tr.Commit();
}
}
}
//获取夹点,简单实体应重载该函数以获取更灵活的控制
public override void GetGripPoints(Entity entity, GripDataCollection grips, double curViewUnitSize, int gripSize, Vector3d curViewDir, GetGripPointsFlags bitFlags)
{
try
{
objectId = entity.ObjectId;
if (objectId.IsErased)
{
return;
}
if (entity is BlockReference)
{
var brf = entity as BlockReference;
bool b = FeatureGripsMapping.instance.grips.ContainsKey(brf.Name);
if (b)
{
double xdist1 = FeatureGripsMapping.instance.grips[brf.Name].xdistn1;
double ydist1 = FeatureGripsMapping.instance.grips[brf.Name].ydistn1;
double xdist2 = FeatureGripsMapping.instance.grips[brf.Name].xdistn2;
double ydist2 = FeatureGripsMapping.instance.grips[brf.Name].ydistn2;
//double startAngle = FeatureGripsMapping.instance.grips[brf.Name].angle;
//grips.Remove(grips[2]);
pt1 = new Point3d(brf.Position.X + xdist1, brf.Position.Y + ydist1, 0);
pt2 = new Point3d(brf.Position.X + xdist2, brf.Position.Y + ydist2, 0);
pt1 = pt1.RotateBy(brf.Rotation /* + Math.PI / 180 *startAngle*/, Vector3d.ZAxis, brf.Position);
pt2 = pt2.RotateBy(brf.Rotation /* + Math.PI / 180 * startAngle*/, Vector3d.ZAxis, brf.Position);
grips.Add(new UserGripData(pt1));
if (pt2 != brf.Position)
{
grips.Add(new UserGripData(pt2));
}
// 取出当前窗口大小
var viewsize = (double)Application.GetSystemVariable("VIEWSIZE");
// 得到当前选择集的集合
var sset = entity.Database.GetEditor().SelectImplied().Value;
if (sset != null)
{
var objIds = sset.GetObjectIds();
if (objIds.Any())
{
var sels = objIds.Last(); //
if (viewsize <= 0.00025)
{
if (selents != sels)
{
selents = sels;
snapDevs(entity.ObjectId);
}
}
}
}
}
else
{
//pt1 = pt2 = Point3d.Origin;
pt1 = pt2 = brf.Position;
nods1.Clear(); nods2.Clear();
}
base.GetGripPoints(entity, grips, curViewUnitSize, gripSize, curViewDir, bitFlags);
}
else if (entity is DBText)
{
var txt = entity as DBText;
grips.Add(new UserGripData(txt.Position));
}
else if (entity is MText)
{
var txt = entity as MText;
grips.Add(new UserGripData(txt.Location));
}
}
catch (System.Exception ex)
{
PublicMethod.Instance.Editor.WriteMessageWithReturn("UserGripOverrule::GetGripPoints :" + ex.Message + "\n");
}
}
public void ExtractSpillwayPositions()
{
Document adoc = Application.DocumentManager.MdiActiveDocument;
if (adoc == null)
{
return;
}
Database db = adoc.Database;
Editor ed = adoc.Editor;
List <Polyline3d> highlighted = new List <Polyline3d>();
try
{
Plane horizontalPlane = new Plane(Point3d.Origin, Vector3d.ZAxis);
//Указать линию КПЧ и линии перелома откоса (они должны быть в соответствующих слоях)
TypedValue[] tv = new TypedValue[] { new TypedValue(0, "POLYLINE"), new TypedValue(8, "КПЧ,ОТК") };//ограничение по слоям
SelectionFilter flt = new SelectionFilter(tv);
PromptSelectionOptions opts = new PromptSelectionOptions();
opts.MessageForAdding = "\nВыберите 3d-полилинии, обозначающие край проезжей части"
+ "и переломы откоса (только с одной стороны дороги). Линии должны быть в слоях КПЧ и ОТК";
PromptSelectionResult res = ed.GetSelection(opts, flt);
if (res.Status == PromptStatus.OK)
{
SelectionSet sset = res.Value;
//Отобрать только полилинии в нужных слоях
Dictionary <string, List <Polyline3dInfo> > slopeLines = new Dictionary <string, List <Polyline3dInfo> >();
//Считать направление полилинии соответствующим направлению дороги
bool? toTheRight = null;//водосброс справа от КПЧ
Polyline3dInfo baseLine = null;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
WrongPolylinesException wrongPolylinesException = new WrongPolylinesException();
//Отбор линий в служебных слоях
foreach (SelectedObject acSSObj in sset)
{
Polyline3d currPoly = tr.GetObject(acSSObj.ObjectId, OpenMode.ForRead) as Polyline3d;
if (currPoly != null)
{
if (currPoly.Layer.Equals("КПЧ") || currPoly.Layer.Equals("ОТК"))
{
List <Polyline3dInfo> polylines = null;
slopeLines.TryGetValue(currPoly.Layer, out polylines);
if (polylines == null)
{
polylines = new List <Polyline3dInfo>();
slopeLines.Add(currPoly.Layer, polylines);
}
polylines.Add(new Polyline3dInfo(currPoly.Layer, currPoly));
}
}
}
//Проверить, что есть весь набор слоев - КПЧ, ОТК
if (!slopeLines.ContainsKey("КПЧ") || !slopeLines.ContainsKey("ОТК"))
{
wrongPolylinesException.Mistakes = wrongPolylinesException.Mistakes | Mistake.NotEnoughLayers;
}
//Проверить, что в слое КПЧ находится только 1 полилиния
List <Polyline3dInfo> checkList1 = null;
slopeLines.TryGetValue("КПЧ", out checkList1);
if (checkList1 == null || checkList1.Count != 1)
{
wrongPolylinesException.Mistakes = wrongPolylinesException.Mistakes | Mistake.TooManyLinesInOneLayer;
}
#region Проперка непересечения линий
//Проверить что линии откоса не пересекают друг друга в плане
//TODO: ВРЕМЕННО отказался от проверки взаимного пересечения линий откоса. Нужно учесть возможность частичного совпадения линий
/*
* List<Polyline3dInfo> slopeLinesList = slopeLines.Values.ToList().Aggregate((l1, l2) =>
* {
* return l1.Concat(l2).ToList();
* });
* bool exitLoop = false;
* for (int i = 0; i < slopeLinesList.Count; i++)
* {
* for (int j = i + 1; j < slopeLinesList.Count; j++)
* {
* Polyline3d poly1 = slopeLinesList[i].Poly3d;
* Polyline3d poly2 = slopeLinesList[j].Poly3d;
* Point3dCollection intersectPts = new Point3dCollection();
* poly1.IntersectWith(poly2, Intersect.OnBothOperands,
* horizontalPlane, intersectPts,
* new IntPtr(0), new IntPtr(0));
*
* //TODO!!!!! Не считать точки пересечения если в точках пересечения происходит полное совпадение вершин двух полилиний
* //В это случае скорее всего полилинии просто сливаются в одну. Это допустимо для коридора
*
*
*
* if (intersectPts.Count > 0)
* {
*
*
*
* wrongPolylinesException.Mistakes = wrongPolylinesException.Mistakes | Mistake.LinesAreIntersecting;
* exitLoop = true;
* break;
* }
* }
* if (exitLoop)
* break;
* }
*/
#endregion
//Проверить, что все точки откоса расположены с одной стороны от КПЧ
//Определить водосброс направо или налево
//TODO: Проверить сонаправленность линий! (низкий приоритет)
//Для всех кодов определить участки КПЧ. Параметры взаимного расположения расчитываются в горизонтальной проекции
//По начальным точкам линий определить расположение линии справа или слева от КПЧ
//базовая линия - КПЧ
List <Polyline3dInfo> list = null;
slopeLines.TryGetValue("КПЧ", out list);
if (list != null && list.Count > 0)
{
baseLine = list.First();
foreach (KeyValuePair <string, List <Polyline3dInfo> > kvp in slopeLines)
{
if (!kvp.Key.Equals("КПЧ"))
{
foreach (Polyline3dInfo poly3dInfo in kvp.Value)
{
poly3dInfo.BaseLine = baseLine.Poly2d;
poly3dInfo.ComputeParameters();
poly3dInfo.ComputeOrientation();
//проверка, что все линии с одной стороны от базовой
if (toTheRight != null)
{
if (toTheRight != poly3dInfo.ToTheRightOfBaseLine)
{
wrongPolylinesException.Mistakes = wrongPolylinesException.Mistakes | Mistake.WrongOrientation;
}
}
else
{
toTheRight = poly3dInfo.ToTheRightOfBaseLine;
}
}
}
}
}
if (wrongPolylinesException.Mistakes != Mistake.None)
{
throw wrongPolylinesException;
}
#region Test
//ed.WriteMessage("\nОшибок нет\ntoTheRight = " + toTheRight);
////Начертить круги в точках начала и конца полилиний
//BlockTable bt = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
//BlockTableRecord ms
// = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite);
//foreach (KeyValuePair<string, List<Polyline3dInfo>> kvp in slopeLines)
//{
// if (!kvp.Key.Equals("КПЧ"))
// {
// foreach (Polyline3dInfo poly3dInfo in kvp.Value)
// {
// Point3d pt1 = poly3dInfo.Poly3d.GetPointAtParameter(poly3dInfo.StartParameter);
// Point3d pt2 = poly3dInfo.Poly3d.GetPointAtParameter(poly3dInfo.EndParameter);
// Point3d pt3 = baseLine.Poly3d.GetPointAtParameter(poly3dInfo.StartParameterBase);
// Point3d pt4 = baseLine.Poly3d.GetPointAtParameter(poly3dInfo.EndParameterBase);
// foreach (Point3d pt in new Point3d[] { pt1, pt2, pt3, pt4 })
// {
// using (Circle circle = new Circle(pt, Vector3d.ZAxis, 1))
// {
// circle.Color = Color.FromColorIndex(ColorMethod.ByAci, 1);
// ms.AppendEntity(circle);
// tr.AddNewlyCreatedDBObject(circle, true);
// }
// }
// using (Line line = new Line(pt1, pt3))
// {
// line.Color = Color.FromColorIndex(ColorMethod.ByAci, 1);
// ms.AppendEntity(line);
// tr.AddNewlyCreatedDBObject(line, true);
// }
// using (Line line = new Line(pt2, pt4))
// {
// line.Color = Color.FromColorIndex(ColorMethod.ByAci, 1);
// ms.AppendEntity(line);
// tr.AddNewlyCreatedDBObject(line, true);
// }
// }
// }
//}
#endregion
tr.Commit();
}
//Включать подсветку 3d полилиний, которые участвуют в расчете
highlighted.Clear();
foreach (KeyValuePair <string, List <Polyline3dInfo> > kvp in slopeLines)
{
foreach (Polyline3dInfo p3dI in kvp.Value)
{
p3dI.Poly3d.Highlight();
highlighted.Add(p3dI.Poly3d);
}
}
int spillwayNum = 1;
PositionData positionData = new PositionData();
while (true)
{
//Указать точку расположения водосброса
PromptPointResult pPtRes;
PromptPointOptions pPtOpts = new PromptPointOptions("");
pPtOpts.Message = "\nУкажите точку расположения водосброса: ";
pPtRes = adoc.Editor.GetPoint(pPtOpts);
if (pPtRes.Status == PromptStatus.OK)
{
Point3d pickedPt = new Point3d(pPtRes.Value.X, pPtRes.Value.Y, 0);
Point3d nearestPtOnBase = baseLine.Poly2d.GetClosestPointTo(pickedPt, true); //найти ближайшую точку базовой линии
double pickedParameterBase = baseLine.Poly2d.GetParameterAtPoint(nearestPtOnBase); //параметр базовой линии в этой точке
//Найти все линии откоса, которые расположены в районе данного параметра
//Предполагается, что для каждого кода есть только одна такая
List <Polyline3dInfo> pickedPtSlopeLines =
slopeLines["ОТК"].FindAll(l => l.StartParameterBase <= pickedParameterBase && l.EndParameterBase >= pickedParameterBase);
if (pickedPtSlopeLines.Count > 1)//Проверить, что найдены минимум 2 линии перелома откоса
{
//Найти ближайшую линию к базовой линии - это бровка
Polyline3dInfo edgeLine = null;
double minDist = double.MaxValue;
foreach (Polyline3dInfo p3dI in pickedPtSlopeLines)
{
Point3d ptOnLine = p3dI.Poly2d.GetClosestPointTo(nearestPtOnBase, false);
double distance = ptOnLine.DistanceTo(nearestPtOnBase);
if (distance < minDist)
{
minDist = distance;
edgeLine = p3dI;
}
}
Point3d nearestPtOnEdge = edgeLine.Poly2d.GetClosestPointTo(pickedPt, true); //найти ближайшую точку бровки
double pickedParameterEdge = edgeLine.Poly2d.GetParameterAtPoint(nearestPtOnEdge); //параметр бровки в этой точке
//Найти касательную к бровке
Vector3d tangentVector = edgeLine.Poly2d.GetFirstDerivative(pickedParameterEdge);
double rotateAngle = toTheRight.Value ? -Math.PI / 2 : Math.PI / 2;
Vector3d spillWayVector = tangentVector.RotateBy(rotateAngle, Vector3d.ZAxis).GetNormal();//вектор водосброса, перпендикулярный бровке
Line spillWayAxis = new Line(nearestPtOnEdge, nearestPtOnEdge + spillWayVector);
Point3dCollection intersections = new Point3dCollection();
baseLine.Poly2d.IntersectWith(spillWayAxis, Intersect.ExtendArgument,
horizontalPlane, intersections,
new IntPtr(0), new IntPtr(0));
if (intersections.Count > 0)
{
Point3d basePt = intersections[0];//Точка пересечения оси водосброса с КПЧ
//Найти точки пересечения перпендикуляра к ОТК0 и остальными линиями откоса
//Отсортировать все линии по удаленности от КПЧ в этой точке
SortedDictionary <Point3d, Polyline3dInfo> intersectionPts
= new SortedDictionary <Point3d, Polyline3dInfo>(new PtsSortComparer(basePt));
pickedPtSlopeLines.Add(baseLine);
foreach (Polyline3dInfo p3dI in pickedPtSlopeLines)
{
intersections.Clear();
p3dI.Poly2d.IntersectWith(spillWayAxis, Intersect.ExtendArgument,
horizontalPlane, intersections,
new IntPtr(0), new IntPtr(0));
if (intersections.Count > 0)
{
intersectionPts.Add(intersections[0], p3dI);
}
}
if (intersectionPts.Count == pickedPtSlopeLines.Count)//Проверить, что все пересечения найдены
{
//intersectionPts содержит все линии с точками пересечения в нужном порядке,
//но все точки пересечения лежат на плоскости XY
//Расчитать трехмерные точки
Point3dCollection pts = new Point3dCollection();
foreach (KeyValuePair <Point3d, Polyline3dInfo> kvp in intersectionPts)
{
Point3d pt2d = kvp.Key;
pt2d = kvp.Value.Poly2d.GetClosestPointTo(pt2d, false);//по какой-то причине в некоторых случаях без этой строки вылетала ошибка при получении параметра
double param = kvp.Value.Poly2d.GetParameterAtPoint(pt2d);
Point3d pt3d = kvp.Value.Poly3d.GetPointAtParameter(param);
pts.Add(pt3d);
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
//Регистрация приложения
Utils.RegisterApp(db, tr);
ObjectId layerId = Utils.CreateLayerIfNotExists("ВОДОСБРОС", db, tr, null,
Color.FromColorIndex(ColorMethod.ByAci, 150), LineWeight.LineWeight030);
BlockTable bt = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord ms
= (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite);
//Вычерчивание 3d полилинии по линии водосброса
using (Polyline3d poly3d = new Polyline3d())
{
poly3d.LayerId = layerId;
poly3d.PolyType = Poly3dType.SimplePoly;
ms.AppendEntity(poly3d);
tr.AddNewlyCreatedDBObject(poly3d, true);
foreach (Point3d pt in pts)
{
PolylineVertex3d vertex = new PolylineVertex3d(pt);
poly3d.AppendVertex(vertex);
tr.AddNewlyCreatedDBObject(vertex, true);
}
//В расширенные данные записать название водосброса
poly3d.XData = new ResultBuffer(
new TypedValue(1001, Constants.AppName),
new TypedValue(1000, spillwayNum.ToString()));
}
tr.Commit();
}
Vector3d baseVector = Vector3d.YAxis;
int sign = Math.Sign(baseVector.CrossProduct(spillWayVector).Z);
double rotation = spillWayVector.GetAngleTo(baseVector) * sign; //в радианах
rotation = rotation * 180 / (Math.PI); //в градусах
List <Slope> slopes = new List <Slope>();
//Сохраниение расположения водосброса и всех уклонов
for (int i = 0; i < pts.Count - 1; i++)
{
Point3d pt1 = pts[i];
Point3d pt2 = pts[i + 1];
Point2d pt1_2d = new Point2d(pt1.X, pt1.Y);
Point2d pt2_2d = new Point2d(pt2.X, pt2.Y);
double len = pt1_2d.GetDistanceTo(pt2_2d);
if (len > 0)
{
double s = (pt2.Z - pt1.Z) / len;
slopes.Add(new Slope()
{
S = s, Len = len
});
}
}
SpillwayPosition spillwayPosition = new SpillwayPosition()
{
Name = spillwayNum.ToString(),
X = pts[0].X,
Y = pts[0].Y,
Z = pts[0].Z,
Z_Rotation = rotation,
ToTheRight = toTheRight.Value,
Slopes = slopes
};
spillwayNum++;
positionData.SpillwayPositions.Add(spillwayPosition);
}
}
}
}
else
{
//ed.WriteMessage("\nвыбор закончен");
break;
}
}
//ed.WriteMessage("\nпродолжение выполнения");
//Сериализация расположений. Сохранить xml в папку рядом с файлом
if (positionData.SpillwayPositions.Count > 0)
{
//TODO: Учесть возможные ошибки из-за отсутствия прав
string filename = null;
int n = 0;
do
{
filename = Path.Combine(Path.GetDirectoryName(adoc.Name),
Path.GetFileNameWithoutExtension(adoc.Name) /*"SpillwayPositions"*/ + "_" + n + ".xml");
n++;
} while (File.Exists(filename));
XmlSerializer xmlSerializer = new XmlSerializer(typeof(PositionData));
using (StreamWriter sw = new StreamWriter(filename))
{
xmlSerializer.Serialize(sw, positionData);
}
//Cообщение о том, что все выполнено
ed.WriteMessage("\nПоложение водосбросов сохранено в файле " + filename);
}
}
}
catch (System.Exception ex)
{
//Utils.ErrorToCommandLine(ed, "Ошибка при извлечении расположений водосбросов", ex);
CommonException(ex, "Ошибка при извлечении расположений водосбросов");
}
finally
{
foreach (Polyline3d p3d in highlighted)
{
p3d.Unhighlight();
}
}
}
public static void test26()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Database db = doc.Database;
EntityList itemEnts = new EntityList();
Point3d insertPt;//插入文字的位置
Transaction tr = db.TransactionManager.StartTransaction();
using (tr)
{
// 获取PickFirst选择集
PromptSelectionOptions promptSelOpt1 = new PromptSelectionOptions();
promptSelOpt1.MessageForAdding = "\n请选择需要编号的车位";
SelectionFilter frameFilter = new SelectionFilter(
new TypedValue[]
{
new TypedValue(0, "INSERT"),
});
// PromptSelectionResult acSSPrompt = ed.SelectImplied();
PromptSelectionResult acSSPrompt = ed.GetSelection(promptSelOpt1, frameFilter);
SelectionSet acSSet;
List <Entity> entityList = new List <Entity>();
List <string> layerNameList = new List <string>();
List <Extents3d> extentsList = new List <Extents3d>();
if (acSSPrompt.Status != PromptStatus.OK)
{ //提示用户交互
ed.WriteMessage("\n请先选择要编号的设备");
return;
}
else
{
//编号局部变量
int number = ed.GetInteger("\n请输入编号起始数字").Value;
number--;
int height = ed.GetInteger("\n请输入编号文字的高度").Value;
string prefix = ed.GetString("\n请输入编号字母前缀（如A-）").StringResult;
prefix = prefix.ToUpper();
acSSet = acSSPrompt.Value;
foreach (ObjectId id in acSSet.GetObjectIds().Reverse())
{
BlockReference bref = tr.GetObject(id, OpenMode.ForRead) as BlockReference;
BlockTableRecord btr = tr.GetObject(bref.BlockTableRecord, OpenMode.ForRead) as BlockTableRecord;
foreach (ObjectId objectId in btr)
{
Entity ent = tr.GetObject(objectId, OpenMode.ForRead) as Entity;
string name = ent.GetType().Name;
ed.WriteMessage(ent.GetType().Name);
//var name = ent.GetType().Name;
if (name == "Polyline")
{
entityList.Add(ent);
}
}
}
//现在只需要Extent3D数据
foreach (Entity ent in entityList)
{
extentsList.Add(ent.GeometricExtents);
}
foreach (var ent in entityList)
{
Point3dCollection collection = new Point3dCollection(); //存放矩形的四个点、
Point3dCollection collection1 = new Point3dCollection(); //存放矩形的2个点、
Point3dCollection collection2 = new Point3dCollection(); //存放矩形的2个点、
Point3dCollection collection3 = new Point3dCollection(); //存放交点
Polyline pl1 = new Polyline();
Polyline pl2 = new Polyline();
number++;
var id = ent.ObjectId;
Polyline pl = (Polyline)tr.GetObject(id, OpenMode.ForRead);
var num = pl.NumberOfVertices;
int[] vertexIndex = new int[num];
for (int i = 0; i < num; i++)
{
vertexIndex[i] = i;
}
foreach (var item in vertexIndex)
{
collection.Add(pl.GetPoint3dAt(item));
}
collection1.Add(collection[0]);
collection1.Add(collection[2]);
collection2.Add(collection[1]);
collection2.Add(collection[3]);
DBHelper.CreatePolyline(pl1, collection1);
DBHelper.CreatePolyline(pl2, collection2);
pl1.IntersectWith(pl2, Intersect.OnBothOperands, new Plane(), collection3, IntPtr.Zero, IntPtr.Zero);
insertPt = collection3[0];
CreateItemNo(insertPt, itemEnts, prefix, number, height);
collection.Clear();
collection1.Clear();
collection2.Clear();
collection3.Clear();
pl1.Dispose();
pl2.Dispose();
//tr.AddNewlyCreatedDBObject(itemEnts,true);
}
}
db.AddToCurrentSpace(itemEnts);
ed.WriteMessage(itemEnts.GetType().Name);
// db.AddToModelSpace(itemEnts);
tr.Commit();//提交事务处理
}
}
// 获取实体信息
public void GetEntitiesInfo(ArrayList entities, Transaction trans, BlockTableRecord btr, int numSample, Document doc, Editor ed)
{
ArrayList uuid = new ArrayList();
ArrayList geom = new ArrayList(); // 坐标点集合
ArrayList colorList = new ArrayList(); // 颜色集合
ArrayList type = new ArrayList(); // 类型集合
ArrayList layerName = new ArrayList();
ArrayList tableName = new ArrayList(); // 表名
System.Data.DataTable attributeList = new System.Data.DataTable(); // 属性集合
ArrayList attributeIndexList = new ArrayList(); //属性索引集合
ArrayList tuliList = new ArrayList(); //图例集合
string projectId = ""; //项目ID
string chartName = ""; //表名称
ArrayList kgGuide = new ArrayList(); //控规引导
string srid = ""; //地理坐标系统编号
ArrayList parentId = new ArrayList(); //配套设施所在地块集合
ArrayList textContent = new ArrayList(); // 文字内容（GIS端展示）
ArrayList blockContent = new ArrayList(); // 块内容（GIS端展示）
Dictionary <string, string> result = new Dictionary <string, string>(); // 汇总
// 遍历所有实体
foreach (object entity in entities)
{
ArrayList singlePositionList = new ArrayList(); // 单个实体坐标点集合
//取得边界数
int loopNum = 1;
if (entity is Hatch)
{
loopNum = (entity as Hatch).NumberOfLoops;
type.Add("polygon");
}
Point3dCollection col_point3d = new Point3dCollection();
BulgeVertexCollection col_ver = new BulgeVertexCollection();
Curve2dCollection col_cur2d = new Curve2dCollection();
for (int i = 0; i < loopNum; i++)
{
col_point3d.Clear();
HatchLoop hatLoop = null;
if (entity is Hatch)
{
try
{
hatLoop = (entity as Hatch).GetLoopAt(i);
}
catch (System.Exception)
{
continue;
}
//如果HatchLoop为PolyLine
if (hatLoop.IsPolyline)
{
col_ver = hatLoop.Polyline;
foreach (BulgeVertex vertex in col_ver)
{
col_point3d.Add(new Point3d(vertex.Vertex.X, vertex.Vertex.Y, 0));
}
}
}
// 如果实体为Polyline
if (entity is Polyline)
{
// 类型
type.Add("polyline");
Polyline polyline = (Polyline)entity;
int vn = polyline.NumberOfVertices;
for (int w = 0; w < vn; w++)
{
Point2d pt = polyline.GetPoint2dAt(w);
col_point3d.Add(new Point3d(pt.X, pt.Y, 0));
}
}
//// 如果实体为Curve
//if (entity is Curve)
//{
// col_cur2d = hatLoop.Curves;
// foreach (Curve2d item in col_cur2d)
// {
// Point2d[] M_point2d = item.GetSamplePoints(numSample);
// foreach (Point2d pt in M_point2d)
// {
// if (!col_point3d.Contains(new Point3d(pt.X, pt.Y, 0)))
// col_point3d.Add(new Point3d(pt.X, pt.Y, 0));
// }
// }
//}
// 如果实体为Point2d
if (entity is DBPoint)
{
type.Add("point");
DBPoint entity3 = (DBPoint)entity;
col_point3d.Add(new Point3d(entity3.Position.X, entity3.Position.Y, 0));
}
// 如果实体为Point
if (entity is Point3d)
{
type.Add("point");
Point3d entity3 = (Point3d)entity;
col_point3d.Add(entity3);
}
// 如果实体为文字
if (entity is MText)
{
type.Add("text");
col_point3d.Add(new Point3d((entity as MText).Location.X, (entity as MText).Location.Y, 0));
}
// 如果实体为文字
if (entity is DBText)
{
type.Add("text");
col_point3d.Add(new Point3d((entity as DBText).Position.X, (entity as DBText).Position.Y, 0));
}
// 块参照
if (entity is BlockReference)
{
type.Add("block");
col_point3d.Add(new Point3d((entity as BlockReference).Position.X, (entity as BlockReference).Position.Y, 0));
}
double[] pointPositionList = new double[2]; //单个点的坐标点集合
// 经纬度转换
foreach (Point3d point in col_point3d)
{
pointPositionList = new double[2] {
Transform(point)[0], Transform(point)[1]
};
singlePositionList.Add(pointPositionList);
} // 经纬度转换结束
} // 单个实体几何坐标数量循环结束
// UUID
Entity entityLayer = (Entity)entity;
Guid guid = new Guid();
guid = Guid.NewGuid();
string str = guid.ToString();
uuid.Add(str);
// 坐标
geom.Add(singlePositionList);
// 颜色
if (entity is Point3d)
{
colorList.Add("");
// 图层名
layerName.Add("无");
}
else
{
LayerTableRecord ltr = (LayerTableRecord)trans.GetObject(entityLayer.LayerId, OpenMode.ForRead);
string color;
color = entityLayer.ColorIndex == 256 ? MethodCommand.GetLayerColorByID(entityLayer.LayerId) : ColorTranslator.ToHtml(entityLayer.Color.ColorValue);
colorList.Add(color);
// 图层名
layerName.Add(ltr.Name);
}
// 表名
tableName.Add("a");
// 属性索引
// 获取每个闭合多段线对应的个体编号和用地代号
ArrayList tagList = new ArrayList();
PromptSelectionResult psrss = ed.SelectCrossingPolygon(col_point3d); // 获取闭合区域内实体方法
if (psrss.Status == PromptStatus.OK)
{
tagList.Clear();
SelectionSet SS = psrss.Value;
ObjectId[] idArray = SS.GetObjectIds();
// 如果读取的块参照数量大于1，取中心点在闭合多段线的块参照
if (idArray.Length > 1)
{
for (int i = 0; i < idArray.Length; i++)
{
Entity ent1 = (Entity)idArray[i].GetObject(OpenMode.ForRead);
if (ent1 is BlockReference)
{
BlockReference ent2 = (BlockReference)ent1;
if (IsInPolygon(ent2.Position, col_point3d))
{
foreach (ObjectId rt in ((BlockReference)ent1).AttributeCollection)
{
DBObject dbObj = trans.GetObject(rt, OpenMode.ForRead) as DBObject;
AttributeReference acAttRef = dbObj as AttributeReference;
tagList.Add(acAttRef.TextString);
//MessageBox.Show("Tag: " + acAttRef.Tag + "\n" +
// "Value: " + acAttRef.TextString + "\n");
}
}
}
}
}
// 如果读取的块参照数量等于1，取中心点在闭合多段线的块参照
else
{
for (int i = 0; i < idArray.Length; i++)
{
Entity ent1 = (Entity)idArray[i].GetObject(OpenMode.ForRead);
if (ent1 is BlockReference)
{
foreach (ObjectId rt in ((BlockReference)ent1).AttributeCollection)
{
DBObject dbObj = trans.GetObject(rt, OpenMode.ForRead) as DBObject;
AttributeReference acAttRef = dbObj as AttributeReference;
tagList.Add(acAttRef.TextString);
}
}
}
}
}
// 如果地块编码属性只有两个属性值，attributeIndexList，如果少于2个或者多于2个都视为异常，添加空。
if (tagList.Count == 2)
{
attributeIndexList.Add(tagList[0] + "_" + tagList[1]);
}
else
{
attributeIndexList.Add("");
}
// 属性
readAttributeList attributeListObj = new readAttributeList();
attributeList = attributeListObj.AttributeList();
// 配套设施所属的地块UUID
// 获取块参照的属性值
ArrayList blockAttribute = new ArrayList();
// 是否是地块编码本身
string isBlockNum = "";
// 如果这个块标注是幼儿园、公厕等，找对对应的地块编号或UUID
if (entity is BlockReference)
{
// 清除原有内容
blockAttribute.Clear();
// 如果entity有两个属性值，可以判断这是一个地块编码
if (((BlockReference)entity).AttributeCollection.Count == 2)
{
isBlockNum = "Block";
}
// 获取地块界限图层上的所有实体
ArrayList polylineEntities = new ArrayList();
// 找出地块界限里的所有闭合多段线，并判断当前块标注实体是否在某一个闭合多段线内，如果在，找出该闭合多段线内的块参照个体编号
TypedValue[] tvs =
new TypedValue[1] {
new TypedValue(
(int)DxfCode.LayerName,
"地块界限"
)
};
SelectionFilter sf = new SelectionFilter(tvs);
PromptSelectionResult psr = ed.SelectAll(sf);
if (psr.Status == PromptStatus.OK)
{
SelectionSet SS = psr.Value;
ObjectId[] idArray = SS.GetObjectIds();
//MessageBox.Show(idArray.Length.ToString());
Point3dCollection polylinePoint3d = new Point3dCollection();
for (int j = 0; j < idArray.Length; j++)
{
// 清除原有内容
polylinePoint3d.Clear();
Entity ent1 = trans.GetObject(idArray[j], OpenMode.ForWrite) as Entity;
if (ent1 is Polyline && (ent1 as Polyline).Closed)
{
Polyline polyline = (Polyline)ent1;
int vn = polyline.NumberOfVertices;
for (int w = 0; w < vn; w++)
{
Point2d pt = polyline.GetPoint2dAt(w);
polylinePoint3d.Add(new Point3d(pt.X, pt.Y, 0));
}
// 获取闭合多段线（地块）内的所有实体
PromptSelectionResult psrss2 = ed.SelectCrossingPolygon(polylinePoint3d);
if (psrss2.Status == PromptStatus.OK)
{
SelectionSet SS2 = psrss2.Value;
ObjectId[] idArray2 = SS2.GetObjectIds();
// 如果读取的块参照数量大于1，且包含当前实体，找出当前块参照所在的闭合多段线
if (idArray2.Length > 1)
{
for (int i = 0; i < idArray2.Length; i++)
{
Entity ent2 = (Entity)idArray2[i].GetObject(OpenMode.ForRead);
// 判断是否是配套设施开始
if (ent2 is BlockReference && (ent2 as BlockReference).Position.X == (entity as BlockReference).Position.X)
{
for (int k = 0; k < idArray2.Length; k++)
{
Entity ent3 = (Entity)idArray2[k].GetObject(OpenMode.ForRead);
if (ent3 is BlockReference)
{
// 判断块参照中心点是否在闭合多段线内，只读取中心点在闭合多段线内的块参照
if (IsInPolygon((ent3 as BlockReference).Position, polylinePoint3d))
{
foreach (ObjectId rt in ((BlockReference)ent3).AttributeCollection)
{
DBObject dbObj = trans.GetObject(rt, OpenMode.ForRead) as DBObject;
AttributeReference acAttRef = dbObj as AttributeReference;
blockAttribute.Add(acAttRef.TextString);
}
}
}
}
} // 判断是否是配套设施结束
}
}
} // 获取闭合多段线（地块）内的所有实体结束
}
}
}
} // 如果这个块标注是幼儿园、公厕等，找对对应的地块编号或UUID 结束
// 如果地块编码属性只有两个属性值，而且不是地块编码块参照，添加到parentId，如果少于2个或者多于2个都视为异常，添加空。
if (blockAttribute.Count == 2 && isBlockNum != "Block")
{
parentId.Add(blockAttribute[0] + "_" + blockAttribute[1]);
}
else
{
parentId.Add("");
}
// 文字内容（GIS端展示）
if (entity is DBText)
{
textContent.Add((entity as DBText).TextString);
}
else if (entity is MText)
{
textContent.Add((entity as MText).Text);
}
else if (entity is BlockReference)
{
List <string> singleBlockContent = new List <string>();
string text = "";
if ((entity as BlockReference).AttributeCollection.Count > 0)
{
foreach (ObjectId rt in ((BlockReference)entity).AttributeCollection)
{
DBObject dbObj = trans.GetObject(rt, OpenMode.ForRead) as DBObject;
AttributeReference acAttRef = dbObj as AttributeReference;
text = text + acAttRef.TextString + "//";
}
text = text.Substring(0, text.Length - 2);
}
textContent.Add(text);
}
else
{
textContent.Add("");
}
// 块内容（GIS端展示）
if (entity is BlockReference)
{
List <string> singleBlockContent = new List <string>();
string text = "//";
foreach (ObjectId rt in ((BlockReference)entity).AttributeCollection)
{
DBObject dbObj = trans.GetObject(rt, OpenMode.ForRead) as DBObject;
AttributeReference acAttRef = dbObj as AttributeReference;
text = acAttRef.TextString + text;
//singleBlockContent.Add(acAttRef.TextString);
}
blockContent.Add(text);
//blockContent.Add(singleBlockContent);
}
else
{
blockContent.Add("");
}
} // 所有的实体循环结束
// 图例
readAttributeList attributeListObj3 = new readAttributeList();
//tuliList.Add(attributeListObj3.TuliList());
tuliList.Add("");
// 项目名
//string projectIdBaseAddress = "http://172.18.84.70:8081/PDD/pdd/individual-manage!findAllProject.action";
//var projectIdHttp = (HttpWebRequest)WebRequest.Create(new Uri(projectIdBaseAddress));
//var response = projectIdHttp.GetResponse();
//var stream = response.GetResponseStream();
//var sr = new StreamReader(stream, Encoding.UTF8);
//var content = sr.ReadToEnd();
//MessageBox.Show(content);
projectId = "D3DEC178-2C05-C5F1-F6D3-45729EB9436A";
// 图表名或者叫文件名
chartName = Path.GetFileName(ed.Document.Name);
// 控规引导
readAttributeList attributeListObj2 = new readAttributeList();
kgGuide = attributeListObj2.KgGuide();
//地理坐标系统编号
srid = "4326";
// 发文字信息
RegulatoryPost.FenTuZe.FenTuZe.SendData(result, uuid, geom, colorList, type, layerName, tableName, attributeIndexList, attributeList, tuliList, projectId, chartName, kgGuide, srid, parentId, textContent, blockContent);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~ methods ~~~~~~~~~~~~~~~~~~~~~~~~~~~//
///// <summary>
///// Save all data before start AutoPoleInstallation
///// </summary>
///// <returns></returns>
//private bool PrepareData()
//{
// Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
// OleDbConnection aConnection = new OleDbConnection(Atend.Control.ConnectionString.AccessCnString);
// OleDbTransaction aTransaction;
// try
// {
// aConnection.Open();
// aTransaction = aConnection.BeginTransaction();
// try
// {
// if (!selectedPole.AccessInsert(aTransaction, aConnection, true, true))
// {
// throw new System.Exception("selectedPole.AccessInsert");
// }
// if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.Conductor)
// {
// if (!SelectedConsol.AccessInsert(aTransaction, aConnection, true, true))
// {
// throw new System.Exception("SelectedConsol.AccessInsert");
// }
// if (!SelectedConsolTension.AccessInsert(aTransaction, aConnection, true, true))
// {
// throw new System.Exception("SelectedConsolTension.AccessInsert");
// }
// }
// else if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
// {
// if (!SelectedClamp.AccessInsert(aTransaction, aConnection, true, true))
// {
// throw new System.Exception("SelectedClamp.AccessInsert");
// }
// if (!SelectedClampTension.AccessInsert(aTransaction, aConnection, true, true))
// {
// throw new System.Exception("SelectedClampTension.AccessInsert");
// }
// }
// }
// catch (System.Exception ex2)
// {
// ed.WriteMessage("ERROR PrepareData: {0} \n", ex2.Message);
// aTransaction.Rollback();
// aConnection.Close();
// return false;
// }
// }
// catch (System.Exception ex1)
// {
// ed.WriteMessage("ERROR PrepareData: {0} \n", ex1.Message);
// aConnection.Close();
// return false;
// }
// aTransaction.Commit();
// aConnection.Close();
// return true;
//}
public bool PoleInstallationWithoutForbiddenArea(Guid SelectedPoleDpackageCode)
{
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;
bool Answer = true;
List <ObjectIdCollection> _AllConsols = new List <ObjectIdCollection>();
ObjectIdCollection _AllClamps = new ObjectIdCollection();
double _SectionLength = 0;
double _SpanLength = 0;
int _SectionCount = SectionCalculation(out _SectionLength);
int _SpanCount = SpanCalculation(_SectionLength, out _SpanLength);
Atend.Base.Acad.AT_INFO CurrentBranchInfo = Atend.Base.Acad.AT_INFO.SelectBySelectedObjectId(BranchEntity.ObjectId);
ObjectIdCollection t = new ObjectIdCollection();
try
{
Atend.Global.Acad.DrawEquips.AcDrawPole _AcDrawPole = null;
Atend.Global.Acad.DrawEquips.AcDrawCirclePole _AcDrawCirclePole = null;
Atend.Global.Acad.DrawEquips.AcDrawPolygonPole _AcDrawPolygonPole = null;
if (_SpanLength != -1)
{
CalculateSectionPoints(branchEntity.StartPoint, branchEntity.EndPoint, _SectionCount);
Atend.Base.Design.DPackage PolePack = Atend.Base.Design.DPackage.AccessSelectByNodeCode(SelectedPoleDpackageCode);
//Start Pole consols or clamp
if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.Conductor)
{
t.Add(GetStartConsolOrClamp());
_AllConsols.Add(t);
}
else
{
_AllClamps.Add(GetStartConsolOrClamp());
}
for (int SectionCounter = 0; SectionCounter < _SectionCount; SectionCounter++)
{
SpanPoints.Clear();
CalculateSpanPoints(SectionPoints[SectionCounter], SectionPoints[SectionCounter + 1], _SpanCount);
for (int SpanCounter = 1; SpanCounter < _SpanCount; SpanCounter++)
{
Atend.Base.Design.DPoleInfo PoleInfo = new Atend.Base.Design.DPoleInfo();
PoleInfo.HalterCount = 0;
PoleInfo.HalterType = 0;
PoleInfo.Factor = 0;
if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.Conductor)
{
#region Counductor
//ed.WriteMessage("~~~~~~~~{0}~~~~~~~~~~~~~~GO TO SHAPE~~~~~~~~~~~{1}~~~~~~~~~~~~~~\n", SelectedPole.Shape, SelectedPole.Type);
if (SelectedPole.Shape == 0)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~TWO~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawCirclePole = new Atend.Global.Acad.DrawEquips.AcDrawCirclePole();
#region POLECircle
_AcDrawCirclePole.UseAccess = true;
_AcDrawCirclePole.ePole = SelectedPole;
_AcDrawCirclePole.ProjectCode = PolePack.ProjectCode;
_AcDrawCirclePole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawCirclePole.dPoleInfo = PoleInfo;
_AcDrawCirclePole.eConsols.Add(SelectedConsol);
_AcDrawCirclePole.eConsolCount.Add(2);
_AcDrawCirclePole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawCirclePole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawCirclePole.eConsolUseAccess.Add(false);
_AcDrawCirclePole.eHalterCount = 0;
if (!_AcDrawCirclePole.DrawPoleCircle(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
_AllConsols.Add(t);
#endregion
}
else if (SelectedPole.Shape == 1)
{
if (SelectedPole.Type == 2)//pertic
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~THREE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawPolygonPole = new Atend.Global.Acad.DrawEquips.AcDrawPolygonPole();
#region PolePolygon
_AcDrawPolygonPole.UseAccess = true;
_AcDrawPolygonPole.ePole = SelectedPole;
_AcDrawPolygonPole.ProjectCode = PolePack.ProjectCode;
_AcDrawPolygonPole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawPolygonPole.dPoleInfo = PoleInfo;
_AcDrawPolygonPole.eConsols.Add(SelectedConsol);
_AcDrawPolygonPole.eConsolCount.Add(2);
_AcDrawPolygonPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPolygonPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPolygonPole.eConsolUseAccess.Add(false);
_AcDrawPolygonPole.eHalterCount = 0;
if (!_AcDrawPolygonPole.DrawPolePolygon(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
_AllConsols.Add(t);
#endregion
}
else
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~ONE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawPole = new Atend.Global.Acad.DrawEquips.AcDrawPole();
#region Pole
_AcDrawPole.UseAccess = true;
_AcDrawPole.ePole = SelectedPole;
_AcDrawPole.ProjectCode = PolePack.ProjectCode;
_AcDrawPole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawPole.dPoleInfo = PoleInfo;
_AcDrawPole.eConsols.Add(SelectedConsol);
_AcDrawPole.eConsolCount.Add(2);
_AcDrawPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPole.eConsolUseAccess.Add(false);
_AcDrawPole.eHalterCount = 0;
if (!_AcDrawPole.DrawPole(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
_AllConsols.Add(t);
#endregion
}
}
#endregion
}//end of if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.Conductor)
else if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
#region Selfkeeper
if (SelectedPole.Shape == 0)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~TWO~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawCirclePole = new Atend.Global.Acad.DrawEquips.AcDrawCirclePole();
#region POLECircle
_AcDrawCirclePole.UseAccess = true;
_AcDrawCirclePole.ePole = SelectedPole;
_AcDrawCirclePole.ProjectCode = PolePack.ProjectCode;
_AcDrawCirclePole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawCirclePole.dPoleInfo = PoleInfo;
_AcDrawCirclePole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawCirclePole.eConsolCount = new ArrayList();
_AcDrawCirclePole.eConsolExistance = new ArrayList();
_AcDrawCirclePole.eConsolProjectCode = new ArrayList();
_AcDrawCirclePole.eConsolUseAccess = new ArrayList();
_AcDrawCirclePole.eHalterCount = 0;
if (!_AcDrawCirclePole.DrawPoleCircle(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
//_AllClamps.Add(t[0]);
#endregion
}
else if (SelectedPole.Shape == 1)
{
if (SelectedPole.Type == 2)//pertic
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~THREE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawPolygonPole = new Atend.Global.Acad.DrawEquips.AcDrawPolygonPole();
#region PolePolygon
_AcDrawPolygonPole.UseAccess = true;
_AcDrawPolygonPole.ePole = SelectedPole;
_AcDrawPolygonPole.ProjectCode = PolePack.ProjectCode;
_AcDrawPolygonPole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawPolygonPole.dPoleInfo = PoleInfo;
_AcDrawPolygonPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPolygonPole.eConsolCount = new ArrayList();
_AcDrawPolygonPole.eConsolExistance = new ArrayList();
_AcDrawPolygonPole.eConsolProjectCode = new ArrayList();
_AcDrawPolygonPole.eConsolUseAccess = new ArrayList();
_AcDrawPolygonPole.eHalterCount = 0;
if (!_AcDrawPolygonPole.DrawPolePolygon(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
//_AllClamps.Add(t[0]);
#endregion
}
else
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~ONE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
_AcDrawPole = new Atend.Global.Acad.DrawEquips.AcDrawPole();
#region Pole
_AcDrawPole.UseAccess = true;
_AcDrawPole.ePole = SelectedPole;
_AcDrawPole.ProjectCode = PolePack.ProjectCode;
_AcDrawPole.Existance = Convert.ToByte(PolePack.IsExistance);
_AcDrawPole.dPoleInfo = PoleInfo;
_AcDrawPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPole.eConsolCount = new ArrayList();
_AcDrawPole.eConsolExistance = new ArrayList();
_AcDrawPole.eConsolProjectCode = new ArrayList();
_AcDrawPole.eConsolUseAccess = new ArrayList();
_AcDrawPole.eHalterCount = 0;
if (!_AcDrawPole.DrawPole(SpanPoints[SpanCounter], GetStartPoleAngle() + 90, out t))
{
throw new System.Exception("failor while drawing pole");
}
//_AllClamps.Add(t[0]);
#endregion
}
}
#endregion
Atend.Global.Acad.DrawEquips.AcDrawKalamp _AcDrawKalamp = new Atend.Global.Acad.DrawEquips.AcDrawKalamp();
_AcDrawKalamp.eClamp = SelectedClamp;
_AcDrawKalamp.Existance = PolePack.IsExistance;
_AcDrawKalamp.ProjectCode = PolePack.ProjectCode;
_AcDrawKalamp.UseAccess = false;
_AllClamps.Add(_AcDrawKalamp.DrawKalamp(Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(t[0])), t[0]));
} //end of else if (SelectedBranch.ProductType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
} //end of span
if (SectionCounter + 1 != _SectionCount)
{
//ed.WriteMessage("~~~~~~~~~~~~<<<SECTION>>>~~~~~~~~~~~~~\n");
if (_AcDrawPole != null)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~ONE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
if (CurrentBranchInfo.NodeType != (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
_AcDrawPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPole.eConsols.Add(SelectedConsolTension);
_AcDrawPole.eConsols.Add(SelectedConsolTension);
_AcDrawPole.eConsolCount = new ArrayList();
_AcDrawPole.eConsolCount.Add(2);
_AcDrawPole.eConsolCount.Add(2);
_AcDrawPole.eConsolExistance = new ArrayList();
_AcDrawPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPole.eConsolProjectCode = new ArrayList();
_AcDrawPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPole.eConsolUseAccess = new ArrayList();
_AcDrawPole.eConsolUseAccess.Add(false);
_AcDrawPole.eConsolUseAccess.Add(false);
}
else
{
_AcDrawPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPole.eConsolCount = new ArrayList();
_AcDrawPole.eConsolExistance = new ArrayList();
_AcDrawPole.eConsolProjectCode = new ArrayList();
_AcDrawPole.eConsolUseAccess = new ArrayList();
}
_AcDrawPole.eHalterCount = 0;
if (!_AcDrawPole.DrawPole(SectionPoints[SectionCounter + 1], GetStartPoleAngle(), out t))
{
throw new System.Exception("failor while drawing pole");
}
}
else if (_AcDrawCirclePole != null)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~TWO~~~~~~~~~~~~~~~~~~~~~~~~~\n");
if (CurrentBranchInfo.NodeType != (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
_AcDrawCirclePole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawCirclePole.eConsols.Add(SelectedConsolTension);
_AcDrawCirclePole.eConsols.Add(SelectedConsolTension);
_AcDrawCirclePole.eConsolCount = new ArrayList();
_AcDrawCirclePole.eConsolCount.Add(2);
_AcDrawCirclePole.eConsolCount.Add(2);
_AcDrawCirclePole.eConsolExistance = new ArrayList();
_AcDrawCirclePole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawCirclePole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawCirclePole.eConsolProjectCode = new ArrayList();
_AcDrawCirclePole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawCirclePole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawCirclePole.eConsolUseAccess = new ArrayList();
_AcDrawCirclePole.eConsolUseAccess.Add(false);
_AcDrawCirclePole.eConsolUseAccess.Add(false);
}
else
{
_AcDrawCirclePole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawCirclePole.eConsolCount = new ArrayList();
_AcDrawCirclePole.eConsolExistance = new ArrayList();
_AcDrawCirclePole.eConsolProjectCode = new ArrayList();
_AcDrawCirclePole.eConsolUseAccess = new ArrayList();
}
_AcDrawCirclePole.eHalterCount = 0;
if (!_AcDrawCirclePole.DrawPoleCircle(SectionPoints[SectionCounter + 1], GetStartPoleAngle(), out t))
{
throw new System.Exception("failor while drawing pole");
}
}
else if (_AcDrawPolygonPole != null)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~THREE~~~~~~~~~~~~~~~~~~~~~~~~~\n");
if (CurrentBranchInfo.NodeType != (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
_AcDrawPolygonPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPolygonPole.eConsols.Add(SelectedConsolTension);
_AcDrawPolygonPole.eConsols.Add(SelectedConsolTension);
_AcDrawPolygonPole.eConsolCount = new ArrayList();
_AcDrawPolygonPole.eConsolCount.Add(2);
_AcDrawPolygonPole.eConsolCount.Add(2);
_AcDrawPolygonPole.eConsolExistance = new ArrayList();
_AcDrawPolygonPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPolygonPole.eConsolExistance.Add(Convert.ToByte(PolePack.IsExistance));
_AcDrawPolygonPole.eConsolProjectCode = new ArrayList();
_AcDrawPolygonPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPolygonPole.eConsolProjectCode.Add(PolePack.ProjectCode);
_AcDrawPolygonPole.eConsolUseAccess = new ArrayList();
_AcDrawPolygonPole.eConsolUseAccess.Add(false);
_AcDrawPolygonPole.eConsolUseAccess.Add(false);
}
else
{
_AcDrawPolygonPole.eConsols = new List <Atend.Base.Equipment.EConsol>();
_AcDrawPolygonPole.eConsolCount = new ArrayList();
_AcDrawPolygonPole.eConsolExistance = new ArrayList();
_AcDrawPolygonPole.eConsolProjectCode = new ArrayList();
_AcDrawPolygonPole.eConsolUseAccess = new ArrayList();
}
////ed.WriteMessage("### BBB ### \n");
_AcDrawPolygonPole.eHalterCount = 0;
if (!_AcDrawPolygonPole.DrawPolePolygon(SectionPoints[SectionCounter + 1], GetStartPoleAngle(), out t))
{
throw new System.Exception("failor while drawing pole");
}
//ed.WriteMessage("### GGG ### \n");
}
if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.Conductor)
{
_AllConsols.Add(t);
}
else if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
Atend.Global.Acad.DrawEquips.AcDrawKalamp _AcDrawKalamp = new Atend.Global.Acad.DrawEquips.AcDrawKalamp();
_AcDrawKalamp.eClamp = SelectedClampTension;
_AcDrawKalamp.Existance = PolePack.IsExistance;
_AcDrawKalamp.ProjectCode = PolePack.ProjectCode;
_AcDrawKalamp.UseAccess = false;
_AllClamps.Add(_AcDrawKalamp.DrawKalamp(Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(t[0])), t[0]));
}
_AcDrawCirclePole = null;
_AcDrawPole = null;
_AcDrawPolygonPole = null;
// ed.WriteMessage("~~~~~~~~~~~~<<<NOT SECTION>>>~~~~~~~~~~~~~\n");
}//change section
}
//End Pole consols
if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.Conductor)
{
t = new ObjectIdCollection();
t.Add(GetEndConsolOrClamp());
_AllConsols.Add(t);
}
else if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
//_AllClamps.Add(t[0]);
_AllClamps.Add(GetEndConsolOrClamp());
}
#region Do Branch Operation Here
if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.Conductor)
{
#region Conductor Operation
//delete conductor
if (Atend.Global.Acad.DrawEquips.AcDrawConductor.DeleteConductorData(branchEntity.ObjectId))
{
Atend.Global.Acad.DrawEquips.AcDrawConductor.DeleteConductor(branchEntity.ObjectId);
}
//ed.WriteMessage("~~~~~~ start sim keshi ~~~~~~~~~\n");
ObjectId LastConsol = ObjectId.Null, StartConsol = ObjectId.Null;
for (int ii = 0; ii < _AllConsols.Count - 1; ii++)
{
//ed.WriteMessage("~~~~~~~~~~~~~~~~~~~~~~~~\n");
ObjectIdCollection o1 = _AllConsols[ii];
//foreach (ObjectId oii in o1)
//{
// ed.WriteMessage("oi:{0}\n", oii);
//}
if (o1.Count == 1)
{
StartConsol = o1[0];
}
else
{
if (o1[1] == LastConsol)
{
StartConsol = o1[0];
}
else
{
StartConsol = o1[1];
}
}
ObjectIdCollection o2 = _AllConsols[ii + 1];
LastConsol = o2[0];
//ed.WriteMessage("Start:{0} , End:{1} \n", StartConsol, LastConsol);
Atend.Global.Acad.DrawEquips.AcDrawConductor _AcDrawConductor = new Atend.Global.Acad.DrawEquips.AcDrawConductor();
_AcDrawConductor.UseAccess = true;
//ed.WriteMessage("111 \n");
_AcDrawConductor.eConductorTip = Atend.Base.Equipment.EConductorTip.AccessSelectByCode(CurrentBranchInfo.ProductCode);
//ed.WriteMessage("112 \n");
///////////_AcDrawConductor.eConductors.Add(Atend.Base.Equipment.EConductor.AccessSelectByCode(_AcDrawConductor.eConductorTip.NeutralProductCode));
//ed.WriteMessage("113 \n");
//////////_AcDrawConductor.eConductors.Add(Atend.Base.Equipment.EConductor.AccessSelectByCode(5));
//ed.WriteMessage("114 \n");
/////////_AcDrawConductor.eConductors.Add(Atend.Base.Equipment.EConductor.AccessSelectByCode(5));
//ed.WriteMessage("115 \n");
Atend.Base.Design.DBranch _DBranch = Atend.Base.Design.DBranch.AccessSelectByCode(new Guid(CurrentBranchInfo.NodeCode));
if (_DBranch.Code != Guid.Empty)
{
_AcDrawConductor.Existance = _DBranch.IsExist;
//ed.WriteMessage("116 \n");
_AcDrawConductor.ProjectCode = _DBranch.ProjectCode;
//ed.WriteMessage("i will go to draw sim \n");
}
else
{
_AcDrawConductor.Existance = 0;
//ed.WriteMessage("116 \n");
_AcDrawConductor.ProjectCode = 0;
//ed.WriteMessage("i will go to draw sim \n");
}
_AcDrawConductor.DrawConductor(Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(StartConsol)), Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(LastConsol)),
StartConsol, LastConsol, _SpanLength);
//ed.WriteMessage("Start:{0} , End:{1} \n", StartConsol, LastConsol);
}
//ed.WriteMessage("~~~~~~ end sim keshi ~~~~~~~~~\n");
#endregion
}
else if (CurrentBranchInfo.NodeType == (int)Atend.Control.Enum.ProductType.SelfKeeper)
{
#region SelfKeeper Operation
if (Atend.Global.Acad.DrawEquips.AcDrawSelfKeeper.DeleteSelfKeeperData(branchEntity.ObjectId))
{
//ed.WriteMessage("delete data io{0}\n", branchEntity.ObjectId);
if (Atend.Global.Acad.DrawEquips.AcDrawSelfKeeper.DeleteSelfKeeper(branchEntity.ObjectId, true))
{
//ed.WriteMessage("delete graphic \n");
for (int ClampCounter = 0; ClampCounter < _AllClamps.Count - 1; ClampCounter++)
{
//ed.WriteMessage("draw self keeper \n");
//ed.WriteMessage("ANSWER={0} \n", oi);
Atend.Global.Acad.DrawEquips.AcDrawSelfKeeper _AcDrawSelfKeeper = new Atend.Global.Acad.DrawEquips.AcDrawSelfKeeper();
_AcDrawSelfKeeper.UseAccess = true;
_AcDrawSelfKeeper.eSelfKeeperTip = Atend.Base.Equipment.ESelfKeeperTip.AccessSelectByCode(SelectedBranch.ProductCode);
_AcDrawSelfKeeper.Existance = SelectedBranch.IsExist;
_AcDrawSelfKeeper.ProjectCode = SelectedBranch.ProjectCode;
_AcDrawSelfKeeper.DrawSelfKeeper(Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(_AllClamps[ClampCounter])), Atend.Global.Acad.UAcad.CenterOfEntity(Atend.Global.Acad.UAcad.GetEntityByObjectID(_AllClamps[ClampCounter + 1])), _AllClamps[ClampCounter], _AllClamps[ClampCounter + 1], _SpanLength);
}
}
else
{
throw new System.Exception("while deleting self keeper");
}
}
else
{
throw new System.Exception("while deleting self keeper");
}
#endregion
}
#endregion
}
else
{
ed.WriteMessage("طول اسپن قابل محاسبه نمی باشد" + "\n");
Answer = false;
}
}
catch (System.Exception ex)
{
ed.WriteMessage("Error While Pole installation : {0} \n", ex.Message);
Answer = false;
}
return(Answer);
}
public void MyHook()
{
Database db = HostApplicationServices.WorkingDatabase;
List <Entity> entityList = new List <Entity>();
List <Entity> centerMarkList = new List <Entity>();
List <Entity> MarkList = new List <Entity>();
Point3d pt1 = new Point3d(0, 0, 0);
Point3d pt2 = new Point3d(5, -3, 0);
Point3d pt3 = new Point3d(0, 70, 0);
Point3d pt4 = new Point3d(-18, 46, 0);
//已知圆心的圆
Circle c1 = new Circle(pt1, Vector3d.ZAxis, 20);
Circle c2 = new Circle(pt2, Vector3d.ZAxis, 45);
Circle c3 = new Circle(pt3, Vector3d.ZAxis, 10);
Circle c4 = new Circle(pt3, Vector3d.ZAxis, 20);
Circle c5 = new Circle(pt4, Vector3d.ZAxis, 8);
//已知两条辅助线
Line l1 = new Line(new Point3d(5, -3 - 45, 0), new Point3d(-60, -3 - 45, 0));
l1.ColorIndex = 2;
Line l2 = new Line(new Point3d(5, -3 - 45 + 64, 0), new Point3d(-60, -3 - 45 + 64, 0));
l2.ColorIndex = 2;
//圆心线
Line lc1x = new Line(new Point3d(-30, 0, 0), new Point3d(30, 0, 0));
Line lc1y = new Line(new Point3d(0, -30, 0), new Point3d(0, 30, 0));
Line lc2x = new Line(new Point3d(-30 + 5, 0 - 3, 0), new Point3d(30 + 5, 0 - 3, 0));
Line lc2y = new Line(new Point3d(-30 + 5, 0 - 3, 0), new Point3d(30 + 5, 0 - 3, 0));
Line lc3x = new Line(new Point3d(-30, 0 + 70, 0), new Point3d(30, 0 + 70, 0));
Line lc3y = new Line(new Point3d(-30, 0 + 70, 0), new Point3d(30, 0 + 70, 0));
//需要求解的圆-->弧
//第一个切圆-->裁剪弧
Circle fc1 = new Circle(pt4, Vector3d.ZAxis, 8 + 18);
Circle fc2 = new Circle(pt3, Vector3d.ZAxis, 20 + 18);
Point3dCollection pc = new Point3dCollection();
fc1.IntersectWith(fc2, Intersect.OnBothOperands, pc, new IntPtr(0), new IntPtr(0));
fc1.Dispose();
fc2.Dispose();
foreach (Point3d p in pc)
{
if (p.X < c4.Center.X)
{
double sa = new Line(p, pt4).Angle;
double sb = new Line(p, pt3).Angle;
Arc a = new Arc(p, 18, sa, sb);
entityList.Add(a);
//第一条弧
break;
}
}
//第二个切圆-->裁剪弧
Circle fc3 = new Circle(pt2, Vector3d.ZAxis, 45 + 86);
Circle fc4 = new Circle(pt3, Vector3d.ZAxis, 20 + 86);
pc.Clear();
fc3.IntersectWith(fc4, Intersect.OnBothOperands, pc, new IntPtr(0), new IntPtr(0));
fc3.Dispose();
fc4.Dispose();
foreach (Point3d p in pc)
{
if (p.X > c2.Center.X)
{
double sa = new Line(p, pt3).Angle;
double sb = new Line(p, pt2).Angle;
Arc a = new Arc(p, 86, sa, sb);
entityList.Add(a);
//第二条弧
break;
}
}
//第三个切圆-->裁剪弧
Circle fc5 = new Circle(pt1, Vector3d.ZAxis, 20 + 9.7144);
Circle fc6 = new Circle(pt2, Vector3d.ZAxis, 45 - 9.7144);
pc.Clear();
fc5.IntersectWith(fc6, Intersect.OnBothOperands, pc, new IntPtr(0), new IntPtr(0));
fc5.Dispose();
fc6.Dispose();
foreach (Point3d p in pc)
{
if (p.X < c1.Center.X && p.Y < (-3 - 45 + 64))
{
double sa = new Line(p, pt1).Angle;
double sb = new Line(pt2, p).Angle;
Arc a = new Arc(p, 9.7144, sa, sb);
entityList.Add(a);
//第三条弧
break;
}
}
//线
Line fl3 = new Line(new Point3d(0, -30, 0), new Point3d(0, 100, 0));
fl3.TransformBy(Matrix3d.Rotation((Math.PI * 15 / 180), doc.Editor.CurrentUserCoordinateSystem.CoordinateSystem3d.Zaxis, fl3.EndPoint));
Point3d fp1 = fl3.GetClosestPointTo(c1.Center, true);
Line l3 = new Line(c1.Center, fp1);
pc.Clear();
l3.IntersectWith(c1, Intersect.ExtendThis, pc, new IntPtr(0), new IntPtr(0));
Point3d fp2 = l3.StartPoint;
foreach (Point3d p in pc)
{
if (p.X > c1.Center.X)
{
fp2 = p;
break;
}
}
l3.Extend(50);
l3.TransformBy(Matrix3d.Rotation((Math.PI * 90 / 180), doc.Editor.CurrentUserCoordinateSystem.CoordinateSystem3d.Zaxis, fp2));
//l3.GetOffsetCurvesGivenPlaneNormal(Vector3d.XAxis, 18);
Vector3d ve = new Vector3d(fp2.X, fp2.Y, fp2.Z);
ve = ve.GetNormal();
//DBObjectCollection lc= l3.GetOffsetCurvesGivenPlaneNormal(ve, 14);
DBObjectCollection lc = l3.GetOffsetCurves(14);
//第四个切圆-->弧
Circle fc7 = new Circle(pt4, Vector3d.ZAxis, 22);
Point3d sc1 = new Point3d();
foreach (Entity l in lc)
{
Point3dCollection fc = new Point3dCollection();
fc7.IntersectWith(l, Intersect.ExtendBoth, fc, new IntPtr(0), new IntPtr(0));
foreach (Point3d p in fc)
{
if (p.Y < pt4.Y)
{
//Circle tmpc = new Circle(p, Vector3d.ZAxis, 14);
Arc a = new Arc(p, 14, new Line(pt1, fp1).Angle, new Line(p, pt4).Angle);
entityList.Add(a);
//第四条弧
break;
}
}
}
//公切线修剪
l3.StartPoint = fp2;
l3.EndPoint = ((Arc)(entityList[entityList.Count - 1])).StartPoint;
//修剪c5圆-->弧
Arc a1 = new Arc(c5.Center, c5.Radius, new Line(c5.Center, ((Arc)(entityList[0])).StartPoint).Angle, new Line(c5.Center, ((Arc)(entityList[3])).EndPoint).Angle);
entityList.Add(a1);//第五条弧
//修剪C2号圆-->弧
Arc a2 = new Arc(c2.Center, c2.Radius, new Line(c2.Center, ((Arc)(entityList[2])).EndPoint).Angle, new Line(c2.Center, ((Arc)(entityList[1])).EndPoint).Angle);
entityList.Add(a2);//第6条弧
//修剪C4号圆-->弧
Arc a3 = new Arc(c4.Center, c4.Radius, new Line(c4.Center, ((Arc)(entityList[1])).StartPoint).Angle, new Line(c4.Center, ((Arc)(entityList[0])).EndPoint).Angle);
entityList.Add(a3);//第7条弧
//修剪c1号圆-->弧
Arc a4 = new Arc(c1.Center, c1.Radius, new Line(c1.Center, ((Arc)(entityList[2])).StartPoint).Angle, new Line(c1.Center, l3.StartPoint).Angle);
entityList.Add(a4);//第8条弧
//画十字线
Point3d[] points = { pt1, pt2, pt3, pt4 };
foreach (Point3d p in points)
{
Line tmpl1 = new Line(new Point3d(p.X - 20, p.Y, 0), new Point3d(p.X + 20, p.Y, 0));
Line tmpl2 = new Line(new Point3d(p.X, p.Y - 20, 0), new Point3d(p.X, p.Y + 20, 0));
//tmpl1.Linetype = "CENTER2";
//tmpl2.Linetype = "CENTER2";
tmpl1.ColorIndex = 4;
tmpl2.ColorIndex = 4;
centerMarkList.Add(tmpl1);
centerMarkList.Add(tmpl2);
}
//标注
//c3直径
DiametricDimension d1 = new DiametricDimension();
Line tmpl = new Line(c3.Center, new Point3d(c3.Center.X - 1, c3.Center.Y + 1, 0));
pc.Clear();
c3.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
d1.ChordPoint = pc[0];
d1.FarChordPoint = pc[1];
d1.LeaderLength = 20;
d1.ColorIndex = 2;
MarkList.Add(d1);
//半径
RadialDimension r1 = new RadialDimension();
Arc tmparc = entityList[0] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 1, tmparc.Center.Y - 0.5, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r1.Center = tmparc.Center;
r1.ChordPoint = pc[1].X > pc[0].X?pc[1]:pc[0];
r1.ColorIndex = 2;
r1.LeaderLength = -5;
MarkList.Add(r1);
RadialDimension r2 = new RadialDimension();
tmparc = entityList[1] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X - 1, tmparc.Center.Y - 0.5, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r2.Center = tmparc.Center;
r2.ChordPoint = pc[1].X > pc[0].X ? pc[0] : pc[1];
r2.ColorIndex = 2;
r2.LeaderLength = -30;
MarkList.Add(r2);
RadialDimension r3 = new RadialDimension();
tmparc = entityList[2] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 1, tmparc.Center.Y - 0.2, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r3.Center = tmparc.Center;
r3.ChordPoint = pc[1].X > pc[0].X ? pc[0] : pc[1];
r3.ColorIndex = 2;
MarkList.Add(r3);
RadialDimension r4 = new RadialDimension();
tmparc = entityList[3] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 0.35, tmparc.Center.Y + 1, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r4.Center = tmparc.Center;
r4.ChordPoint = pc[1].X < pc[0].X ? pc[0] : pc[1];
r4.ColorIndex = 2;
MarkList.Add(r4);
RadialDimension r5 = new RadialDimension();
tmparc = entityList[4] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 0.35, tmparc.Center.Y + 1, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r5.Center = tmparc.Center;
r5.ChordPoint = pc[1].X > pc[0].X ? pc[0] : pc[1];
r5.ColorIndex = 2;
MarkList.Add(r5);
RadialDimension r6 = new RadialDimension();
tmparc = entityList[5] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 1, tmparc.Center.Y - 1, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r6.Center = tmparc.Center;
r6.ChordPoint = pc[1].X < pc[0].X ? pc[0] : pc[1];
r6.ColorIndex = 2;
r6.LeaderLength = 20;
MarkList.Add(r6);
RadialDimension r7 = new RadialDimension();
tmparc = entityList[6] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X + 1, tmparc.Center.Y + 1, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r7.Center = tmparc.Center;
r7.ChordPoint = pc[1].X < pc[0].X ? pc[0] : pc[1];
r7.ColorIndex = 2;
r7.LeaderLength = 20;
MarkList.Add(r7);
RadialDimension r8 = new RadialDimension();
tmparc = entityList[7] as Arc;
tmpl = new Line(tmparc.Center, new Point3d(tmparc.Center.X - 1, tmparc.Center.Y - 1, 0));
pc.Clear();
tmparc.IntersectWith(tmpl, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
r8.Center = tmparc.Center;
r8.ChordPoint = pc[1].X > pc[0].X ? pc[0] : pc[1];
r8.ColorIndex = 2;
r8.LeaderLength = 13;
MarkList.Add(r8);
//对齐标注1
AlignedDimension am1 = new AlignedDimension();
am1.XLine1Point = pt1;
am1.XLine2Point = new Point3d(5, 0, 0);
am1.DimLinePoint = new Point3d(0, -40, 0);
am1.ColorIndex = 2;
MarkList.Add(am1);
//对齐标注2
AlignedDimension am2 = new AlignedDimension();
am2.XLine1Point = pt1;
am2.XLine2Point = new Point3d(0, -3, 0);
am2.DimLinePoint = new Point3d(40, 0, 0);
am2.ColorIndex = 2;
MarkList.Add(am2);
//对齐标注3
AlignedDimension am3 = new AlignedDimension();
am3.XLine1Point = pt1;
am3.XLine2Point = new Point3d(0, 70, 0);
am3.DimLinePoint = new Point3d(70, 30, 0);
am3.ColorIndex = 2;
MarkList.Add(am3);
//对齐标注4
AlignedDimension am4 = new AlignedDimension();
am4.XLine1Point = l1.EndPoint;
am4.XLine2Point = l2.EndPoint;
am4.DimLinePoint = new Point3d(-60, 0, 0);
am4.ColorIndex = 2;
MarkList.Add(am4);
//对齐标注5
AlignedDimension am5 = new AlignedDimension();
am5.XLine1Point = new Point3d(0, 34, 0);
am5.XLine2Point = new Point3d(-18, 34, 0);
am5.DimLinePoint = new Point3d(0, 8, 0);
am5.ColorIndex = 2;
MarkList.Add(am5);
//对齐标注6
AlignedDimension am6 = new AlignedDimension();
am6.XLine1Point = new Point3d(-18, 70, 0);
am6.XLine2Point = new Point3d(-18, 46, 0);
am6.DimLinePoint = new Point3d(-50, 0, 0);
am6.ColorIndex = 2;
MarkList.Add(am6);
//角度标注1
LineAngularDimension2 lad1 = new LineAngularDimension2();
tmpl = new Line(new Point3d(0, 0, 0), new Point3d(0, 1, 0));
pc.Clear();
tmpl.IntersectWith(l3, Intersect.ExtendBoth, pc, new IntPtr(0), new IntPtr(0));
lad1.XLine2Start = pc[0];
lad1.XLine2End = pt1;
lad1.XLine1Start = l3.EndPoint;
lad1.XLine1End = l3.StartPoint;
lad1.ArcPoint = new Point3d(10, 2, 0);
lad1.ColorIndex = 2;
MarkList.Add(lad1);
AddEntities(MarkList.ToArray());
Entity[] es = { c3, l3 };
////AddEntities(es);
entityList.AddRange(es);
//组成面域
DBObjectCollection dbc1 = new DBObjectCollection();
foreach (Entity e in entityList)
{
dbc1.Add(e);
}
dbc1.Add(c3);
DBObjectCollection regions = new DBObjectCollection();
regions = Region.CreateFromCurves(dbc1);
//doc.Editor.WriteMessage("r1{0}", dbc1regions.Count);
Region re1 = regions[0] as Region;
Region re2 = regions[1] as Region;
doc.Editor.WriteMessage("r1:{0},r2:{1}", re1.Area, re2.Area);
double area = re1.Area > re2.Area ?re1.Area - re2.Area:re2.Area - re1.Area;
Area = area;
doc.Editor.WriteMessage("面积{0}", area);
//entityList.Clear();
//entityList.Add(r1);
//entityList.Add(r2);
foreach (Entity e in entityList)
{
e.ColorIndex = 1;
}
entityList.Add(l1);
entityList.Add(l2);
AddEntities(entityList.ToArray());
AddEntities(centerMarkList.ToArray());
}
// 判断点和多段线的位置关系
// 返回值：-1表示在多段线外部，0表示在多段线上，1表示在多段线内部
public static int PtRelationToPoly(Polyline pPoly, Point2d pt, double tol)
{
Debug.Assert(pPoly != null);
// 1.如果点到多段线的最近点和给定的点重合，表示点在多段线上
Point3d closestPoint = pPoly.GetClosestPointTo(ToPoint3d(pt, pPoly.Elevation), false); // 多段线上与给定点距离最近的点
if (Math.Abs(closestPoint.X - pt.X) < tol && Math.Abs(closestPoint.Y - pt.Y) < tol) // 点在多段线上
{
return(0);
}
// 2.第一个射线的方向是从最近点到当前点，起点是当前点
Ray pRay = new Ray();
pRay.BasePoint = new Point3d(pt.X, pt.Y, pPoly.Elevation);
// 射线的起点是pt，方向为从最近点到pt，如果反向做判断，则最近点距离pt太近的时候，最近点也会被作为一个交点（这个交点不太容易被排除掉）
// 此外，这样的射线方向很容易判断出点不在内部的情况
Vector3d vec = new Vector3d(-(closestPoint.X - pt.X), -(closestPoint.Y - pt.Y), 0);
pRay.UnitDir = vec;
// 3.射线与多段线计算交点
Point3dCollection intPoints = new Point3dCollection();
pPoly.IntersectWith(pRay, Intersect.OnBothOperands, intPoints, IntPtr.Zero, IntPtr.Zero);
// IntersectWith函数经常会得到很近的交点，这些点必须进行过滤
FilterEqualPoints(intPoints, 1.0E-4);
// 4.判断点和多段线的位置关系
RETRY:
Point3d[] pts = new Point3d[10]; //////////////////////////////////////////////////////////////////////////
if (intPoints.Count > 0)
{
pts[0] = intPoints[0];
}
if (intPoints.Count > 1)
{
pts[1] = intPoints[1];
}
if (intPoints.Count > 2)
{
pts[2] = intPoints[2];
}
if (intPoints.Count > 3)
{
pts[3] = intPoints[3];
}
// 4.1 如果射线和多段线没有交点，表示点在多段线的外部
if (intPoints.Count == 0)
{
pRay.Dispose();
return(-1);
}
else
{
// 3.1 过滤掉由于射线被反向延长带来的影响
FilterEqualPoints(intPoints, ToPoint2d(closestPoint), 1.0E-4); // 2008-0907修订记录：当pt距离最近点比较近的时候，最近点竟然被作为一个交点！
// 3.2 如果某个交点与最近点在给定点的同一方向，要去掉这个点（这个点明显不是交点，还是由于intersectwith函数的Bug）
for (int i = intPoints.Count - 1; i >= 0; i--)
{
if ((intPoints[i].X - pt.X) * (closestPoint.X - pt.X) >= 0 &&
(intPoints[i].Y - pt.Y) * (closestPoint.Y - pt.Y) >= 0)
{
intPoints.RemoveAt(i);
}
}
int count = intPoints.Count;
for (int i = 0; i < intPoints.Count; i++)
{
if (PointIsPolyVert(pPoly, ToPoint2d(intPoints[i]), 1.0E-4)) // 只要有交点是多段线的顶点就重新进行判断
{
// 处理给定点很靠近多段线顶点的情况(如果与顶点距离很近，就认为这个点在多段线上，因为这种情况没有什么好的判断方法)
if (PointIsPolyVert(pPoly, new Point2d(pt.X, pt.Y), 1.0E-4))
{
return(0);
}
// 将射线旋转一个极小的角度(2度)再次判断（假定这样不会再通过上次判断到的顶点）
vec = vec.RotateBy(0.035, Vector3d.ZAxis);
pRay.UnitDir = vec;
intPoints.Clear();
pPoly.IntersectWith(pRay, Intersect.OnBothOperands, intPoints, IntPtr.Zero, IntPtr.Zero);
goto RETRY; // 继续判断结果
}
}
pRay.Dispose();
if (count % 2 == 0)
{
return(-1);
}
else
{
return(1);
}
}
}
public static Polyline[] PlotWallPlan(Database db, Line[] LSet, double width, bool isLeft, int scale)
{
Polyline PL1 = new Polyline()
{
Closed = true, Layer = "粗线"
}; // 外框
Polyline PL2 = new Polyline()
{
Closed = false, Layer = "粗线"
}; // 上拐角
Polyline PL3 = new Polyline()
{
Closed = false, Layer = "粗线"
}; // 下拐角
Polyline PL4 = new Polyline()
{
Closed = false, Layer = "粗线"
}; // 上内侧
Polyline PL5 = new Polyline()
{
Closed = false, Layer = "粗线"
}; // 下内侧
Line L1 = new Line()
{
Layer = "虚线", LinetypeScale = 4.0
};
Line L4 = new Line()
{
Layer = "细线"
}; // 上短线
Line L5 = new Line()
{
Layer = "细线"
}; // 下短线
Line L6 = new Line()
{
Layer = "粗线"
}; // 内墙
Line temp;
Point3dCollection pts = new Point3dCollection();
Point2d UpperPt, LowerPt, UpperPt2, LowerPt2;
double ang_red = LSet[0].Angle;
if (isLeft)
{
LowerPt = LSet[0].StartPoint.Convert2D();
UpperPt = LSet[LSet.Length - 1].StartPoint.Convert2D();
UpperPt2 = LSet[LSet.Length - 2].StartPoint.Convert2D();
LowerPt2 = LSet[1].StartPoint.Convert2D();
}
else
{
UpperPt = LSet[LSet.Length - 1].EndPoint.Convert2D();
UpperPt2 = LSet[LSet.Length - 2].EndPoint.Convert2D();
LowerPt2 = LSet[1].EndPoint.Convert2D();
LowerPt = LSet[0].EndPoint.Convert2D();
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockTable blockTbl = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord modelSpace = tr.GetObject(blockTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
int direct = isLeft ? -1 : 1;
double dy = (UpperPt.Y - LowerPt.Y) / Math.Cos(ang_red);
double dy2 = 0;
double thick, Wall_width, Wall_thick, Mouth_thick, Plate_thick;
switch (width)
{
default:
thick = 300;
Wall_width = 1800;
Wall_thick = 350;
Mouth_thick = 250;
Plate_thick = 250;
break;
case 1900:
thick = 200;
Wall_width = 1800 + 200;
Wall_thick = 200;
Mouth_thick = 200;
Plate_thick = 200;
break;
case 2500:
thick = 200;
Wall_width = 2575 + 250;
Wall_thick = 250;
Mouth_thick = 250;
Plate_thick = 250;
break;
case 4700:
thick = 300;
Wall_thick = 350;
Wall_width = 3600;
Mouth_thick = 250;
Plate_thick = 300;
break;
}
// 外框
Point2d p0, p1, p2, p3, p4, p5;
dy2 = dy + Wall_width * Math.Tan(30.0 / 180.0 * Math.PI) * 2;
p0 = LowerPt;
p1 = p0.Convert2D(-direct * thick, 0);
p2 = p1.Convert2D(0, dy);
p3 = p2.Convert2D(direct * thick, 0);
p4 = p3.Convert2D(direct * Wall_width, Wall_width * Math.Tan(30.0 / 180.0 * Math.PI));
p5 = p4.Convert2D(0, -dy2);
PL1.AddVertexAt(0, p0, 0, 0, 0);
PL1.AddVertexAt(1, p1, 0, 0, 0);
PL1.AddVertexAt(2, p2, 0, 0, 0);
PL1.AddVertexAt(3, p3, 0, 0, 0);
PL1.AddVertexAt(4, p4, 0, 0, 0);
PL1.AddVertexAt(5, p5, 0, 0, 0);
PL1.TransformBy(Matrix3d.Rotation(ang_red, Vector3d.ZAxis, LowerPt.Convert3D()));
modelSpace.AppendEntity(PL1);
tr.AddNewlyCreatedDBObject(PL1, true);
// 拐角
temp = new Line(PL1.GetPoint3dAt(4), PL1.GetPoint3dAt(5));
temp.TransformBy(Matrix3d.Displacement(new Vector3d(-direct * Mouth_thick * Math.Cos(ang_red),
-direct * Mouth_thick * Math.Cos(ang_red) * Math.Sin(ang_red), 0)));
temp.IntersectWith(PL1, Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
p0 = PL1.GetPoint2dAt(4);
p1 = temp.StartPoint.Convert2D();
p2 = pts[0].Convert2D();
PL2.AddVertexAt(0, p0, 0, 0, 0);
PL2.AddVertexAt(1, p1, 0, 0, 0);
PL2.AddVertexAt(2, p2, 0, 0, 0);
modelSpace.AppendEntity(PL2);
tr.AddNewlyCreatedDBObject(PL2, true);
p0 = PL1.GetPoint2dAt(5);
p1 = temp.EndPoint.Convert2D();
p2 = pts[1].Convert2D();
PL3.AddVertexAt(0, p0, 0, 0, 0);
PL3.AddVertexAt(1, p1, 0, 0, 0);
PL3.AddVertexAt(2, p2, 0, 0, 0);
modelSpace.AppendEntity(PL3);
tr.AddNewlyCreatedDBObject(PL3, true);
L1.StartPoint = pts[0];
L1.EndPoint = pts[1];
modelSpace.AppendEntity(L1);
tr.AddNewlyCreatedDBObject(L1, true);
// 上内墙
pts = new Point3dCollection();
temp = new Line(PL1.GetPoint3dAt(3), PL1.GetPoint3dAt(4));
temp = (Line)temp.GetOffsetCurves(-Wall_thick * direct)[0];
temp.IntersectWith(LSet[LSet.Length - 2], Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
p0 = UpperPt2;
p1 = pts[0].Convert2D();
pts.Clear();
temp.IntersectWith(PL1.GetLine(4), Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
p2 = pts[0].Convert2D();
PL4.AddVertexAt(0, p0, 0, 0, 0);
PL4.AddVertexAt(1, p1, 0, 0, 0);
PL4.AddVertexAt(2, p2, 0, 0, 0);
modelSpace.AppendEntity(PL4);
tr.AddNewlyCreatedDBObject(PL4, true);
pts.Clear();
temp = new Line(PL1.GetPoint3dAt(0), PL1.GetPoint3dAt(5));
temp = (Line)temp.GetOffsetCurves(Wall_thick * direct)[0];
//temp.TransformBy(Matrix3d.Displacement(new Vector3d(0, Wall_thick / Math.Cos(30.0 / 180.0 * Math.PI), 0)));
temp.IntersectWith(LSet[1], Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
p0 = LowerPt2;
p1 = pts[0].Convert2D();
pts.Clear();
temp.IntersectWith(PL1.GetLine(4), Intersect.ExtendBoth, pts, IntPtr.Zero, IntPtr.Zero);
p2 = pts[0].Convert2D();
PL5.AddVertexAt(0, p0, 0, 0, 0);
PL5.AddVertexAt(1, p1, 0, 0, 0);
PL5.AddVertexAt(2, p2, 0, 0, 0);
modelSpace.AppendEntity(PL5);
tr.AddNewlyCreatedDBObject(PL5, true);
L6.StartPoint = PL1.GetPoint3dAt(3);
L6.EndPoint = PL1.GetPoint3dAt(0);
modelSpace.AppendEntity(L6);
tr.AddNewlyCreatedDBObject(L6, true);
DBText txt = new DBText();
Circle C1 = new Circle();
Circle C2 = new Circle();
Point2d PositionPoint = p0.Convert2D(direct * 10 * scale, 3 * scale);
TextStyleTable st = tr.GetObject(db.TextStyleTableId, OpenMode.ForRead) as TextStyleTable;
txt.TextString = (Plate_thick / 10).ToString();
txt.Height = 2 * scale;
txt.Position = PositionPoint.Convert3D();
txt.HorizontalMode = TextHorizontalMode.TextCenter;
txt.VerticalMode = TextVerticalMode.TextVerticalMid;
txt.AlignmentPoint = PositionPoint.Convert3D();
txt.TextStyleId = st["fsdb"];
txt.Layer = "标注";
txt.WidthFactor = 0.75;
C1 = new Circle(PositionPoint.Convert3D(), Vector3d.ZAxis, 1.3 * scale);
C2 = new Circle(PositionPoint.Convert3D(), Vector3d.ZAxis, 1.6 * scale);
C1.Layer = "标注";
C2.Layer = "标注";
modelSpace.AppendEntity(txt);
tr.AddNewlyCreatedDBObject(txt, true);
modelSpace.AppendEntity(C1);
tr.AddNewlyCreatedDBObject(C1, true);
modelSpace.AppendEntity(C2);
tr.AddNewlyCreatedDBObject(C2, true);
tr.Commit();
}
Polyline[] res = new Polyline[] { PL1, PL2, PL3, PL4, PL5 };
return(res);
}
public void WeldingLineStart()
{
#region Select welding mode
var weldingModeOpts = new PromptKeywordOptions("\nWeld over points or object? ");
weldingModeOpts.Keywords.Add("Points");
weldingModeOpts.Keywords.Add("polYline");
weldingModeOpts.Keywords.Add("Line");
weldingModeOpts.Keywords.Add("Circle");
weldingModeOpts.Keywords.Add("Arc");
weldingModeOpts.Keywords.Add("Block");
weldingModeOpts.Keywords.Default = "Points";
var weldingModeRslt = _ed.GetKeywords(weldingModeOpts);
// If the user pressed cancel - return with no error
if (weldingModeRslt.Status != PromptStatus.OK)
{
return;
}
if (weldingModeRslt.StringResult == "Block")
{
ImportInsulationBlock();
return;
}
var selectedObjectId = new ObjectId();
// If the user selected Points mode
if (weldingModeRslt.StringResult == "Points")
{
//Prompt the user for vertices
_weldingVertices.Clear();
_weldingVertices = GetPointsFromUser();
if (_weldingVertices.Count < 1)
{
return;
}
}
// Else the user selected an Object mode from the list
else
{
// Prompt for object
var objectSelectionOpts = new PromptEntityOptions("\nSelect the object : ");
objectSelectionOpts.SetRejectMessage("\nEntity is not of the predifined type :" + weldingModeRslt.StringResult);
objectSelectionOpts.AddAllowedClass(typeof(Line), false);
objectSelectionOpts.AddAllowedClass(typeof(Polyline), false);
objectSelectionOpts.AddAllowedClass(typeof(Circle), false);
objectSelectionOpts.AddAllowedClass(typeof(Arc), false);
var objectSelectionRslt = _ed.GetEntity(objectSelectionOpts);
// If the user pressed cancel - return with no error
if (objectSelectionRslt.Status != PromptStatus.OK)
{
return;
}
// else get the slected object id and type
selectedObjectId = objectSelectionRslt.ObjectId;
}
#endregion
#region Welding side selection
// Prompt the user to select object side M for middle - draw on the middle of the line or Point - for side.
var weldingSideOpts = new PromptKeywordOptions("\nPick side point or draw in the middle. ");
weldingSideOpts.Keywords.Add("Side");
weldingSideOpts.Keywords.Add("Middle ");
weldingSideOpts.Keywords.Default = "Side";
var weldingSideRslt = _ed.GetKeywords(weldingSideOpts);
// If the user pressed cancel - return with no error
if (weldingSideRslt.Status != PromptStatus.OK)
{
return;
}
// If tThe user selected 'Side'
var sidePoint = new Point3d();
if (weldingSideRslt.StringResult == "Side")
{
// Prompt the user to pick up a side point on the desired side.
var sidePointOpts = new PromptPointOptions("\nPick side point : ");
var sidePointRslt = _ed.GetPoint(sidePointOpts);
// If the user pressed cancel - return with no error
if (sidePointRslt.Status != PromptStatus.OK)
{
return;
}
sidePoint = sidePointRslt.Value;
}
// Else If the user selected 'Middle'
else if (weldingSideRslt.StringResult == "Middle")
{
sidePoint = new Point3d(0, 0, 0);
}
// else
// Not supposed to end here, because the choise in the prompt is restricted to two options
#endregion
#region Welding arcs lenght and distance selection
// Prompt the user to set welding arcs lenght
var weldingArcsChordOpts = new PromptDoubleOptions("\nWelding arcs lenght : ")
{
UseDefaultValue = true,
DefaultValue = Settings.Default.WeldingArcsLenght
};
var weldingArcsChordRslt = _ed.GetDouble(weldingArcsChordOpts);
// If the user pressed cancel - return with no error
if (weldingArcsChordRslt.Status != PromptStatus.OK)
{
return;
}
if (weldingArcsChordRslt.Value <= 0)
{
_ed.WriteMessage("Lenght must be positive number.");
return;
}
Settings.Default.WeldingArcsLenght = weldingArcsChordRslt.Value;
//else
// The choice is Ok and lenght is provided. Continue...
// Prompt the user to set the distance between the welding arcs
var weldingArcsDistanceOpts = new PromptDoubleOptions("\nSet the distance between the welding arcs : ")
{
UseDefaultValue = true,
DefaultValue = Settings.Default.WeldingArcsDistance
};
var weldingArcsOffsetRslt = _ed.GetDouble(weldingArcsDistanceOpts);
// If the user pressed cancel - return with no error
if (weldingArcsOffsetRslt.Status != PromptStatus.OK)
{
return;
}
if (weldingArcsOffsetRslt.Value <= 0)
{
_ed.WriteMessage("Distance must be positive number.");
}
Settings.Default.WeldingArcsDistance = weldingArcsOffsetRslt.Value;
Settings.Default.Save();
//else
// The choice is Ok and distance is provided. Continue...
#endregion
#region Hand over the process to the specific drawing function
_weldingArcs.Clear();
switch (weldingModeRslt.StringResult)
{
#region Points
case "Points":
for (var i = 0; i < _weldingVertices.Count; i++)
{
// слага ги в глобалната
_weldingVertices[i] = _weldingVertices[i].TransformBy(GeometryUtility.GetTransforMatrixToWcs());
}
using (var tr = _doc.Database.TransactionManager.StartTransaction())
{
var sPt = new Point3d(sidePoint.X + 0.00001, sidePoint.Y + 0.00001, sidePoint.Z);
sPt = sPt.TransformBy(GeometryUtility.GetTransforMatrixToWcs());
// реперната точка и тя в глобалната
var tP1 = new Point3d(0, 0, 0);
var tP2 = new Point3d(_weldingVertices[1].X - _weldingVertices[0].X, _weldingVertices[1].Y - _weldingVertices[0].Y, _weldingVertices[1].Z - _weldingVertices[0].Z);
var tP3 = new Point3d(sPt.X - _weldingVertices[0].X, sPt.Y - _weldingVertices[0].Y, sPt.Z - _weldingVertices[0].Z);
var ucs = GeometryUtility.GetUcs(tP1, tP2, tP3, false);
for (var i = 0; i < _weldingVertices.Count; i++)
{
_weldingVertices[i] = _weldingVertices[i].TransformBy(ucs);
}
if (weldingSideRslt.StringResult == "Side")
{
sidePoint = sidePoint.TransformBy(_ed.CurrentUserCoordinateSystem);
sidePoint = sidePoint.TransformBy(ucs);
}
var oldUcs = _ed.CurrentUserCoordinateSystem;
_ed.CurrentUserCoordinateSystem = Matrix3d.Identity;
_weldingArcs = BuildWeldingArcsOverPts(_weldingVertices,
sidePoint,
weldingArcsChordRslt.Value,
weldingArcsOffsetRslt.Value,
weldingArcsOffsetRslt.Value / 2);
DrawWeldingLine(_weldingArcs, tr);
_ed.CurrentUserCoordinateSystem = oldUcs;
foreach (Arc a in _weldingArcs)
{
a.TransformBy(ucs.Inverse());
}
tr.Commit();
}
break;
#endregion
#region Line
case "Line":
using (var tr = _doc.Database.TransactionManager.StartTransaction())
{
_weldingVertices.Clear();
var ent = tr.GetObject(selectedObjectId, OpenMode.ForRead) as Entity; // Lishkov 07/07/2012
var name = ent.GetType().ToString(); // Lishkov 07/07/2012
if ((name.IndexOf("Line") < 0) || (name.IndexOf("Polyline") >= 0))
{
MessageBox.Show("Selection is not Line !", "E R R O R"); break;
} // Lishkov 07/07/2012
var weldingLine = (Line)tr.GetObject(selectedObjectId, OpenMode.ForWrite);
var sPt = new Point3d(sidePoint.X + 0.00001, sidePoint.Y + 0.00001, sidePoint.Z);
sPt = sPt.TransformBy(GeometryUtility.GetTransforMatrixToWcs());
var tP1 = new Point3d(0, 0, 0);
var tP2 = new Point3d(weldingLine.EndPoint.X - weldingLine.StartPoint.X, weldingLine.EndPoint.Y - weldingLine.StartPoint.Y, weldingLine.EndPoint.Z - weldingLine.StartPoint.Z);
var tP3 = new Point3d(sPt.X - weldingLine.StartPoint.X, sPt.Y - weldingLine.StartPoint.Y, sPt.Z - weldingLine.StartPoint.Z);
var ucs = GeometryUtility.GetUcs(tP1, tP2, tP3, false);
weldingLine.TransformBy(ucs);
if (weldingSideRslt.StringResult == "Side")
{
sidePoint = sidePoint.TransformBy(_ed.CurrentUserCoordinateSystem);
sidePoint = sidePoint.TransformBy(ucs);
}
var oldUcs = _ed.CurrentUserCoordinateSystem;
_ed.CurrentUserCoordinateSystem = Matrix3d.Identity;
_weldingVertices.Add(weldingLine.StartPoint);
_weldingVertices.Add(weldingLine.EndPoint);
_weldingArcs = BuildWeldingArcsOverPts(_weldingVertices,
sidePoint,
weldingArcsChordRslt.Value,
weldingArcsOffsetRslt.Value,
weldingArcsOffsetRslt.Value / 2);
DrawWeldingLine(_weldingArcs, tr);
_ed.CurrentUserCoordinateSystem = oldUcs;
foreach (Arc a in _weldingArcs)
{
a.TransformBy(ucs.Inverse());
}
weldingLine.TransformBy(ucs.Inverse());
tr.Commit();
}
break;
#endregion
#region Polyline
case "polYline":
case "Polyline":
case "polyline":
using (var tr = _doc.Database.TransactionManager.StartTransaction())
{
var weldingPoly = tr.GetObject(selectedObjectId, OpenMode.ForWrite) as Polyline;
if (weldingPoly == null)
{
MessageBox.Show("Selection is not PolyLine !", "E R R O R");
break;
}
var temp = new Point3dCollection();
var temp1 = new Point3dCollection();
DBObjectCollection acDbObjColl = null; //acPoly.GetOffsetCurves(0.25);
var acBlkTbl = tr.GetObject(_db.BlockTableId, OpenMode.ForRead) as BlockTable;
var acBlkTblRec = (BlockTableRecord)tr.GetObject(acBlkTbl[BlockTableRecord.ModelSpace], OpenMode.ForWrite);
//офсетирано копие
acDbObjColl = weldingPoly.GetOffsetCurves(0.001); //тестова на много малко разстояние от оригинала // Lishkov 07/07/2012
foreach (Entity acEnt in acDbObjColl)
{
// Add each offset object
acBlkTblRec.AppendEntity(acEnt);
tr.AddNewlyCreatedDBObject(acEnt, true);
}
Polyline weldingPolyOffset = null;
try
{
weldingPolyOffset = tr.GetObject(acDbObjColl[0].ObjectId, OpenMode.ForWrite) as Polyline;
}
catch { }
if (weldingPolyOffset != null)
{
//точките деления по двете полилинии
temp = GeometryUtility.DividePoly(ref weldingPoly, weldingArcsOffsetRslt.Value);
temp1 = GeometryUtility.DividePoly(ref weldingPolyOffset, weldingArcsOffsetRslt.Value);
//проверка вярна ли е посоката на офсетиране
var tP = sidePoint.TransformBy(GeometryUtility.GetTransforMatrixToWcs());
var dist1 = temp[0].DistanceTo(tP);
var dist2 = temp1[0].DistanceTo(tP);
foreach (Point3d p in temp)
{
if (p.DistanceTo(tP) < dist1)
{
dist1 = p.DistanceTo(tP);
}
}
foreach (Point3d p in temp1)
{
if (p.DistanceTo(tP) < dist2)
{
dist2 = p.DistanceTo(tP);
}
}
//ако не е вярна посоката на офсетиране
#region
if (dist1 < dist2) //ако посоката е грешна изтриваме тестовата и правим в обратна поскока на зададеното разстояние
{
weldingPolyOffset.Erase();
acDbObjColl = weldingPoly.GetOffsetCurves(-weldingArcsChordRslt.Value);
foreach (Entity acEnt in acDbObjColl)
{
// Add each offset object
acBlkTblRec.AppendEntity(acEnt);
tr.AddNewlyCreatedDBObject(acEnt, true);
}
try
{
weldingPolyOffset = tr.GetObject(acDbObjColl[0].ObjectId, OpenMode.ForWrite) as Polyline;
}
catch
{
MessageBox.Show("Offset error", "E R R O R");
return;
}
temp1 = GeometryUtility.DividePoly(ref weldingPolyOffset, weldingArcsOffsetRslt.Value);
}
else //ако посоката е вярна изтриваме тестовата и правим в същата поскока на зададеното разстояние // Lishkov 07/07/2012
{
weldingPolyOffset.Erase();
acDbObjColl = weldingPoly.GetOffsetCurves(weldingArcsChordRslt.Value);
foreach (Entity acEnt in acDbObjColl)
{
// Add each offset object
acBlkTblRec.AppendEntity(acEnt);
tr.AddNewlyCreatedDBObject(acEnt, true);
}
try
{
weldingPolyOffset = tr.GetObject(acDbObjColl[0].ObjectId, OpenMode.ForWrite) as Polyline;
}
catch
{
MessageBox.Show("Offset error", "E R R O R");
return;
}
temp1 = GeometryUtility.DividePoly(ref weldingPolyOffset, weldingArcsOffsetRslt.Value);
}
#endregion
//work
var oldUcs = _ed.CurrentUserCoordinateSystem;
_ed.CurrentUserCoordinateSystem = Matrix3d.Identity;
for (var i = 0; i < temp.Count - 1; i++)
{
var tempP = temp1[0];
var oP = temp1[0];
foreach (Point3d p in temp1)
{
if (temp[i].DistanceTo(p) < temp[i].DistanceTo(tempP))
{
oP = tempP;
tempP = p;
}
}
var ucs = GeometryUtility.GetUcs(temp[i], temp[i + 1], tempP, true);
Arc acArc;
if (weldingSideRslt.StringResult != "Side")
{
acArc = new Arc(
new Point3d(0, 0, 0),
weldingArcsChordRslt.Value / 2,
Math.PI / 2.0 + Math.PI,
Math.PI / 2.0 + Math.PI + Math.PI
);
}
else
{
// BricsCAD hack
acArc = new Arc(
new Point3d(),
weldingArcsChordRslt.Value / 2,
Math.PI / 2.0 + Math.PI,
Math.PI / 2.0 + Math.PI + Math.PI
)
{
Center = new Point3d(0, weldingArcsChordRslt.Value / 2, 0)
};
}
_weldingArcs.Add(acArc);
try
{
acArc.TransformBy(ucs);
}
catch
{
_weldingArcs.RemoveAt(_weldingArcs.Count - 1);
if (i > 0)
{
var tP1 = new Point3d(0, 0, 0);
var tP2 = new Point3d(temp[i].X - temp[i - 1].X, temp[i].Y - temp[i - 1].Y, temp[i].Z - temp[i - 1].Z);
var tP3 = new Point3d(oP.X - temp[i - 1].X, oP.Y - temp[i - 1].Y, oP.Z - temp[i - 1].Z);
ucs = GeometryUtility.GetUcs(tP1, tP2, tP3, true);
try
{
_weldingArcs.Add(acArc);
var lp1 = new Point3d(0, 0, 0);
var lp2 = new Point3d(weldingArcsOffsetRslt.Value, 0, 0);
var l = new Line3d(acArc.StartPoint, acArc.EndPoint);
acArc.TransformBy(Matrix3d.Displacement(lp1.GetVectorTo(lp2)));
acArc.TransformBy(ucs);
acArc.TransformBy(Matrix3d.Displacement(-temp[i - 1].GetVectorTo(Point3d.Origin)));
}
catch
{
_weldingArcs.RemoveAt(_weldingArcs.Count - 1);
}
}
}
acArc.SetDatabaseDefaults();
}
if (!weldingPoly.Closed)
{
var acA = (Arc)_weldingArcs[_weldingArcs.Count - 1];
var acArc = (Entity)acA.Clone();
acArc.TransformBy(Matrix3d.Displacement(temp[temp.Count - 2].GetVectorTo(temp[temp.Count - 1])));
_weldingArcs.Add(acArc);
}
weldingPolyOffset.Erase();
DrawWeldingLine(_weldingArcs, tr);
_ed.CurrentUserCoordinateSystem = oldUcs;
}
tr.Commit();
}
break;
#endregion
#region Circle
case "Circle":
// ElseIf the user picked up object of type 'arc' or 'circle'
// Call the function that makes welding over arc or circle.
// _Circle is an Arc with start angle of 0 and end angle of 360
using (var tr = _doc.Database.TransactionManager.StartTransaction())
{
var weldingCircle = tr.GetObject(selectedObjectId, OpenMode.ForRead) as Circle;
if (weldingCircle != null)
{
using (var T = _doc.Database.TransactionManager.StartTransaction())
{
var weldingLine = T.GetObject(selectedObjectId, OpenMode.ForWrite) as Circle;
var r = new Ray
{
BasePoint = weldingLine.Center,
UnitDir = weldingLine.Center.GetVectorTo(weldingLine.StartPoint)
};
var pts = new Point3dCollection();
weldingLine.IntersectWith(r, Intersect.OnBothOperands, pts, IntPtr.Zero, IntPtr.Zero);
var sPt = new Point3d(sidePoint.X + 0.00001, sidePoint.Y + 0.00001, sidePoint.Z);
sPt = sPt.TransformBy(GeometryUtility.GetTransforMatrixToWcs());
var ucs = GeometryUtility.GetUcs(weldingLine.Center, pts[0], sPt, false);
weldingLine.TransformBy(ucs);
if (weldingSideRslt.StringResult == "Side")
{
sidePoint = sidePoint.TransformBy(_ed.CurrentUserCoordinateSystem);
sidePoint = sidePoint.TransformBy(ucs);
}
var oldUcs = _ed.CurrentUserCoordinateSystem;
_ed.CurrentUserCoordinateSystem = Matrix3d.Identity;
var arcSide = GeometryUtility.SideOfPointToArc(weldingCircle.Center, weldingCircle.Radius, sidePoint);
var sAng = -1 + weldingCircle.Center.DistanceTo(sidePoint) / weldingCircle.Radius;
_weldingArcs = BuildWeldingArcsOverArc(weldingCircle.Center,
weldingCircle.Radius,
0.0,
2 * Math.PI,
/* sAng , */
weldingArcsChordRslt.Value,
weldingArcsOffsetRslt.Value,
0,
arcSide);
DrawWeldingLine(_weldingArcs, T);
_ed.CurrentUserCoordinateSystem = oldUcs;
foreach (Arc a in _weldingArcs)
{
a.TransformBy(ucs.Inverse());
}
weldingLine.TransformBy(ucs.Inverse());
T.Commit();
}
}
else
{
MessageBox.Show("\nYou did not slected object of type Circle. Try again...");
}
tr.Commit();
}
break;
#endregion
#region Arc
case "Arc":
using (var tr = _doc.Database.TransactionManager.StartTransaction())
{
var weldingArc = tr.GetObject(selectedObjectId, OpenMode.ForRead) as Arc;
if (weldingArc != null)
{
using (var T = _doc.Database.TransactionManager.StartTransaction())
{
var weldingLine = T.GetObject(selectedObjectId, OpenMode.ForWrite) as Arc;
var sPt = sidePoint.TransformBy(GeometryUtility.GetTransforMatrixToWcs());
var tP1 = new Point3d(0, 0, 0);
var tP2 = new Point3d(weldingLine.EndPoint.X - weldingLine.StartPoint.X, weldingLine.EndPoint.Y - weldingLine.StartPoint.Y, weldingLine.EndPoint.Z - weldingLine.StartPoint.Z);
var tP3 = new Point3d(sPt.X - weldingLine.StartPoint.X, sPt.Y - weldingLine.StartPoint.Y, sPt.Z - weldingLine.StartPoint.Z);
var ucs = GeometryUtility.GetUcs(tP1, tP2, tP3, false);
weldingLine.TransformBy(ucs);
if (weldingSideRslt.StringResult == "Side")
{
sidePoint = sidePoint.TransformBy(_ed.CurrentUserCoordinateSystem);
sidePoint = sidePoint.TransformBy(ucs);
}
var oldUcs = _ed.CurrentUserCoordinateSystem;
_ed.CurrentUserCoordinateSystem = Matrix3d.Identity;
var arcSide = GeometryUtility.SideOfPointToArc(weldingArc.Center, weldingArc.Radius, sidePoint);
var sAng = -1 + weldingArc.Center.DistanceTo(sidePoint) / weldingArc.Radius;
_weldingArcs = BuildWeldingArcsOverArc(weldingArc.Center,
weldingArc.Radius,
weldingArc.StartAngle,
weldingArc.EndAngle,
weldingArcsChordRslt.Value,
weldingArcsOffsetRslt.Value,
weldingArcsOffsetRslt.Value / 2,
arcSide);
DrawWeldingLine(_weldingArcs, T);
_ed.CurrentUserCoordinateSystem = oldUcs;
foreach (Arc a in _weldingArcs)
{
a.TransformBy(ucs.Inverse());
}
weldingLine.TransformBy(ucs.Inverse());
T.Commit();
}
}
else
{
MessageBox.Show("\nYou did not slected object of type Arc. Try again...");
}
tr.Commit();
}
break;
#endregion
}
#endregion
}
/// <summary>
/// Removes all existing hatching and regenerates it based on current applied levels.
/// </summary>
public void GenerateHatching()
{
//Remove all existing hatches
foreach (PlotHatch ph in Hatches)
{
ph.Erase();
}
Hatches.Clear();
Database acCurDb;
acCurDb = Application.DocumentManager.MdiActiveDocument.Database;
//Set to only work for exposed brickwork
Transaction acTrans = acCurDb.TransactionManager.TopTransaction;
//TODO: Optimise by cahcing
Polyline perimeter = new Polyline();
//Build the perimeter line
foreach (WallJoint wj in PerimeterPath)
{
perimeter.AddVertexAt(perimeter.NumberOfVertices, new Point2d(wj.Point.X, wj.Point.Y), 0, 0, 0);
}
perimeter.Closed = true;
Polyline tankOffset = perimeter.GetOffsetCurves(-Properties.Settings.Default.P_Hatch_Offset)[0] as Polyline;
Polyline exposedOffset = perimeter.GetOffsetCurves(Properties.Settings.Default.P_Hatch_Offset)[0] as Polyline;
/*BlockTable acBlkTbl;
* acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead) as BlockTable;
* BlockTableRecord acBlkTblRec;
* acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
* acBlkTblRec.AppendEntity(tankOffset);
* acTrans.AddNewlyCreatedDBObject(tankOffset, true); */
//Calculate first point not at ground level
int startIndex = 0;
for (int i = 0; i < PerimeterPath.Count; i++)
{
if (PerimeterPath[i].Courses() == 0)
{
startIndex = i;
break;
}
}
Point3dCollection hatchBoundaryPoints = new Point3dCollection();
Point3dCollection hatchOffsetPoints = new Point3dCollection();
bool hatchActive = false;
//Iterate around perimeter
for (int i = startIndex; i <= PerimeterPath.Count + startIndex; i++)
{
int index;
if (i >= PerimeterPath.Count)
{
index = i - PerimeterPath.Count;
}
else
{
index = i;
}
if (PerimeterPath[index].Courses() != 0)
{
if (!hatchActive)
{
hatchActive = true;
if (index == 0)
{
hatchBoundaryPoints.Add(PerimeterPath[PerimeterPath.Count - 1].Point);
}
else
{
hatchBoundaryPoints.Add(PerimeterPath[index - 1].Point);
}
}
hatchBoundaryPoints.Add(PerimeterPath[index].Point);
if (PerimeterPath[index].Courses() > 0)
{
hatchOffsetPoints.Add(exposedOffset.GetPoint3dAt(index));
}
else
{
hatchOffsetPoints.Add(tankOffset.GetPoint3dAt(index));
}
}
else //End potentially found
{
if (hatchActive)
{
hatchActive = false;
hatchBoundaryPoints.Add(PerimeterPath[index].Point);
for (int y = hatchOffsetPoints.Count - 1; y >= 0; y--)
{
hatchBoundaryPoints.Add(hatchOffsetPoints[y]);
}
//Create hatch
PlotHatch ph = new PlotHatch();
ph.Generate(hatchBoundaryPoints);
hatchBoundaryPoints.Clear();
hatchOffsetPoints.Clear();
Hatches.Add(ph);
}
}
}
/*BlockReference newBlockRef = (BlockReference)BlockRef.GetObject(OpenMode.ForWrite);
* DBObjectCollection explodedBlock = new DBObjectCollection();
* newBlockRef.Explode(explodedBlock);
*
* foreach (Entity entToAdd in explodedBlock)
* {
* if (entToAdd is Polyline)
* {
* Polyline acPline = entToAdd as Polyline;
*
* // Open the Block table for read
* BlockTable acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead) as BlockTable;
*
* // Open the Block table record Model space for write
* BlockTableRecord acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
*
* //Add tanking and exposed brickwork
* //Order levels by param along line to include doors in the correct place
* var levelChanges = (from l in Level orderby l.Param ascending select l).ToList();
*
* int startPoint = 0;
* bool Tanking = false;
*
* //Check if first point is ok by seeing if there is a 150mm difference or less
* if (Math.Round(levelChanges[0].Level, 3) < -0.15 && !(levelChanges[0].Absolute == true && double.Parse(levelChanges[0].TextValue) < FinishedFloorLevel - 0.150))
* {
* //First point is not level, step backwards through the list untill point is found
* int negCount = 0;
* for (int i = levelChanges.Count - 1; i >= 0; i--)
* {
* if (Math.Round(levelChanges[i].Level, 3) < -0.15 && !(levelChanges[i].Absolute == true && double.Parse(levelChanges[i].TextValue) < FinishedFloorLevel - 0.150))
* {
* negCount--;
* }
* else
* {
* //TODO: WOrk out why an if check? Thinks its so its doesnt go past the first ok pont. Change the outer if loop to a while??
* if (startPoint == 0)
* {
* startPoint = negCount;
* }
* }
* }
* }
*
* //Define point collections to hold the boundary coordinates
* Point3dCollection hatchBoundaryPoints = new Point3dCollection();
* Point3dCollection hatchOffsetPoints = new Point3dCollection();
*
* // Create the offset polyline
* //TODO: Add check here for very small lines not able to be offset
* DBObjectCollection offsetOutlineObjects = acPline.GetOffsetCurves(Civils.Constants.TankingHatchOffest);
* Polyline offsetOutline = offsetOutlineObjects[0] as Polyline;
*
* for (int step = startPoint; step < levelChanges.Count; step++)
* {
* int i = 0; //Convert step to accessor
* if (step < 0)
* {
* i = levelChanges.Count + startPoint;
*
* } else
* {
* i = step;
* }
*
* //if (Math.Round(levelChanges[i].Level, 3) != -0.15 && !(levelChanges[i].Absolute == true && double.Parse(levelChanges[i].TextValue) == FinishedFloorLevel - 0.150))
* if (Math.Round(levelChanges[i].Level, 3) < -0.15 && !(levelChanges[i].Absolute == true && double.Parse(levelChanges[i].TextValue) < FinishedFloorLevel - 0.150))
* {
* if (!Tanking)
* {
* Tanking = true;
* //Stop overflow if the first point is one
* if (i == 0)
* {
* hatchBoundaryPoints.Add(acPline.GetPointAtParameter(levelChanges[levelChanges.Count - 1].Param));
* }
* else
* {
* hatchBoundaryPoints.Add(acPline.GetPointAtParameter(levelChanges[i - 1].Param));
* }
* }
* hatchBoundaryPoints.Add(acPline.GetPointAtParameter(levelChanges[i].Param));
* hatchOffsetPoints.Add(offsetOutline.GetPointAtParameter(levelChanges[i].Param));
* }
* else
* {
* if (Tanking)
* {
* //end point found
* Tanking = false;
* hatchBoundaryPoints.Add(acPline.GetPointAtParameter(levelChanges[i].Param));
*
* //Create hatch object
* //Traverse outline backwards to pick up points
* for (int j = hatchOffsetPoints.Count - 1; j >= 0; j--)
* {
* hatchBoundaryPoints.Add(hatchOffsetPoints[j]);
* }
*
* // Lose this line in the real command
* bool success = JPPCommandsInitialisation.setJPPLayers();
*
* PlotHatch ph = new PlotHatch();
* ph.Generate(hatchBoundaryPoints);
* Hatches.Add(ph);
*
* hatchBoundaryPoints.Clear();
* hatchOffsetPoints.Clear();
* }
* }
* }
*
* //Loop finished without tank ending, therefore first point is end
* if(Tanking)
* {
* Tanking = false;
* hatchBoundaryPoints.Add(acPline.GetPointAtParameter(levelChanges[0].Param));
*
* //Create hatch object
* //Traverse outline backwards to pick up points
* for (int j = hatchOffsetPoints.Count - 1; j >= 0; j--)
* {
* hatchBoundaryPoints.Add(hatchOffsetPoints[j]);
* }
*
* // Lose this line in the real command
* bool success = JPPCommandsInitialisation.setJPPLayers();
*
* PlotHatch ph = new PlotHatch();
* ph.Generate(hatchBoundaryPoints);
* Hatches.Add(ph);
*
* hatchBoundaryPoints.Clear();
* hatchOffsetPoints.Clear();
* }
* }
* }*/
}
