public static bool IsPointOnHatchByRay(this Hatch hatch, Point3d pt, Tolerance tolerance, Database db)
{
var hId = hatch.Id;
try
{
if (hatch.Id.IsNull)
{
using var t = db.TransactionManager.StartTransaction();
var cs = db.CurrentSpaceId.GetObjectT <BlockTableRecord>(OpenMode.ForWrite);
var hClone = (Hatch)hatch.Clone();
hId = cs.AppendEntity(hClone);
t.AddNewlyCreatedDBObject(hClone, true);
t.Commit();
}
using var r = hId.CreateRegionFromHatch();
using var ray = new Ray { BasePoint = pt, UnitDir = new Vector3d(0.235, 0.7458, 0) };
var pts = new Point3dCollection();
ray.IntersectWith(r, Intersect.OnBothOperands, new Plane(), pts, IntPtr.Zero, IntPtr.Zero);
return(pts.Count > 0 && (pts.Count.IsOdd() || pts.Cast <Point3d>().Any(p => p.IsEqualTo(pt))));
}
finally
{
if (!hId.IsNull)
{
#pragma warning disable 618
using var h = hId.Open(OpenMode.ForWrite, false, true) as Hatch;
#pragma warning restore 618
h?.Erase();
}
}
}
public static List <Point3d> Intersects([NotNull] this Polyline pl1, Polyline pl2)
{
var pts = new Point3dCollection();
pl1.IntersectWith(pl2, Intersect.OnBothOperands, new Plane(), pts, IntPtr.Zero, IntPtr.Zero);
return(pts.Cast <Point3d>().ToList());
}
public static List <Point2d> IntersectWithOnPlane([NotNull] this Entity ent, [NotNull] Entity entOther, Intersect extent)
{
var ptsCol = new Point3dCollection();
ent.IntersectWith(entOther, extent, new Plane(), ptsCol, IntPtr.Zero, IntPtr.Zero);
return(ptsCol.Cast <Point3d>().Select(s => s.Convert2d()).ToList());
}
public static void ViewContourElevation()
{
var pt1 = Interaction.GetPoint("\n截线起点");
if (pt1.IsNull())
{
return;
}
var pt2 = Interaction.GetLineEndPoint("\n截线终点", pt1);
if (pt2.IsNull())
{
return;
}
var line = NoDraw.Line(pt1, pt2);
var ids = QuickSelection.SelectAll().QWhere(x => x.GetCode() == "730101" || x.GetCode() == "730102").ToList();
var temps = new List <ObjectId>();
ids.QForEach <Curve>(cv =>
{
if (cv != null)
{
var points = new Point3dCollection();
Algorithms.IntersectWith3264(line, cv, Intersect.OnBothOperands, points);
var text = cv.ObjectId.GetData(DictName.CmDrawing, KeyName.Elevation);
points.Cast <Point3d>().ForEach(p =>
{
temps.Add(Draw.Text(text, 2.5, p));
});
}
});
Interaction.GetString("\n按ESC退出");
temps.QForEach(x => x.Erase());
}
public static void Show(Point3dCollection array)
{
var sb = new StringBuilder();
array.Cast <Point3d>().ToList().ForEach(p => sb.AppendLine(p.ToString()));
Show(sb.ToString());
}
/// <summary>
/// Разделение площадки на ячейки
/// </summary>
private List <Tile> DividePlace()
{
List <Tile> resTiles = new List <Tile>();
// Построение вертик и гор линий по границе полилинии с заданным шагом
var ext = pl.GeometricExtents;
var horTiles = Divide(ext.MinPoint.X, ext.MaxPoint.X);
var verticTiles = Divide(ext.MinPoint.Y, ext.MaxPoint.Y);
using (var plane = new Plane())
{
foreach (var horT in horTiles)
{
// Построение вертик линии
using (var verticLine = new Line(new Point3d(horT, ext.MinPoint.Y, 0), new Point3d(horT, ext.MaxPoint.Y, 0)))
{
// пересечение вертик линии c контуром
var ptsIntersect = new Point3dCollection();
verticLine.IntersectWith(pl, Intersect.OnBothOperands, plane, ptsIntersect, IntPtr.Zero, IntPtr.Zero);
if (ptsIntersect.Count == 0)
{
continue;
}
if (ptsIntersect.Count == 1)
{
//var pt = new Point2d(horT,ptsIntersect[0].Y);
//resTiles.Add(new Tile(pt));
}
else
{
var pts = ptsIntersect.Cast <Point3d>().OrderBy(o => o.Y);
var ptIntersectLower = pts.First();
foreach (var ptIntersectTop in pts.Skip(1))
{
var ptMid = ptIntersectLower.Center(ptIntersectTop);
if (pl.IsPointInsidePolygon(ptMid))
{
foreach (var vertT in verticTiles)
{
if (vertT >= ptIntersectTop.Y)
{
break;
}
else if (vertT - ptIntersectLower.Y >= stepQuart)
{
var pt = new Point2d(horT, vertT);
resTiles.Add(new Tile(pt, step, step));
}
}
}
ptIntersectLower = ptIntersectTop;
}
}
}
}
}
return(resTiles);
}
public static void RemoveDuplicate([NotNull] this Point3dCollection pts, Tolerance tol)
{
var ptsClean = RemoveDuplicate(pts.Cast <Point3d>().ToList(), tol);
pts.Clear();
foreach (var pt in ptsClean)
{
pts.Add(pt);
}
}
/// <summary>
/// Попадает ли точка внутрь полилинии.
/// Предполагается, что полилиния имеет замкнутый контур.
/// Подходит для полилиний с дуговыми сегментами.
/// Работает медленнее чем IsPointInsidePolygon(), примерно в 10 раз.
/// </summary>
/// <param name="pt"></param>
/// <param name="onIsInside">Если исходная точка лежит на полилинии, то считать, что она внутри или нет: True - внутри, False - снаружи.</param>
/// <param name="pl"></param>
/// <exception cref="Exceptions.ErrorException">Не удалось определить за несколько попыток.</exception>
public static bool IsPointInsidePolyline([NotNull] this Polyline pl, Point3d pt, bool onIsInside = false)
{
using (var ray = new Ray())
{
ray.BasePoint = pt;
var vec = new Vector3d(0, 1, pt.Z);
ray.SecondPoint = pt + vec;
using (var ptsIntersects = new Point3dCollection())
{
bool isContinue;
var isPtOnPolyline = false;
var countWhile = 0;
do
{
using (var plane = new Plane())
{
pl.IntersectWith(ray, Intersect.OnBothOperands, plane, ptsIntersects, IntPtr.Zero, IntPtr.Zero);
}
isContinue = ptsIntersects.Cast <Point3d>().Any(p =>
{
if (pt.IsEqualTo(p))
{
isPtOnPolyline = true;
return(true);
}
var param = pl.GetParameterAtPointTry(p);
return(Math.Abs(param % 1) < 0.0001);
});
if (isPtOnPolyline)
{
return(onIsInside);
}
if (isContinue)
{
vec = vec.RotateBy(0.01, Vector3d.ZAxis);
ray.SecondPoint = pt + vec;
ptsIntersects.Clear();
countWhile++;
if (countWhile > 3)
{
throw new ErrorException(new Errors.Error(
"Не определено попадает ли точка внутрь полилинии.",
pt.GetRectangleFromCenter(3), Matrix3d.Identity,
System.Drawing.SystemIcons.Error));
}
}
} while (isContinue);
return(NetLib.MathExt.IsOdd(ptsIntersects.Count));
}
}
}
public static bool IsPointInsidePolylineByRay([NotNull] Ray ray, Point3d pt, Curve c, Tolerance tolerance)
{
var pts = new Point3dCollection();
ray.IntersectWith(c, Intersect.OnBothOperands, new Plane(), pts, IntPtr.Zero, IntPtr.Zero);
if (pts.Count > 0 && pts.Cast <Point3d>().All(p => c.IsVertex(p, tolerance.EqualPoint)))
{
// Повернуть луч и повторить
ray.TransformBy(Matrix3d.Rotation(5d.ToRadians(), Vector3d.ZAxis, ray.BasePoint));
return(IsPointInsidePolylineByRay(ray, pt, c, tolerance));
}
return(pts.Count.IsOdd() || IsPointOnPolyline(c, pt, tolerance));
}
private List <Point2d> GetZeroLineIntersects(MapBuilding build)
{
var pts = new List <Point2d>();
using (var lineZero = new Line(ptCalc, new Point3d(ptCalc.X + 100, ptCalc.Y, 0)))
{
var ptsIntersects = new Point3dCollection();
using (var plane = new Plane())
{
lineZero.IntersectWith(build.Contour, Intersect.ExtendThis, plane, ptsIntersects, IntPtr.Zero, IntPtr.Zero);
pts = ptsIntersects.Cast <Point3d>().Select(s => s.Convert2d()).ToList();
}
}
return(pts);
}
public static void PolySplit()
{
var ids = Interaction.GetSelection("\nSelect polyline", "LWPOLYLINE");
var newPolys = new List <Polyline>();
var pm = new ProgressMeter();
pm.Start("Processing...");
pm.SetLimit(ids.Length);
ids.QOpenForWrite <Polyline>(list =>
{
foreach (var poly in list)
{
var intersectPoints = new Point3dCollection();
foreach (var poly1 in list)
{
if (poly1 != poly)
{
poly.IntersectWith3264(poly1, Intersect.OnBothOperands, intersectPoints);
}
}
var ipParams = intersectPoints
.Cast <Point3d>()
.Select(ip => poly.GetParamAtPointX(ip))
.OrderBy(param => param)
.ToArray();
if (intersectPoints.Count > 0)
{
var curves = poly.GetSplitCurves(new DoubleCollection(ipParams));
foreach (var curve in curves)
{
newPolys.Add(curve as Polyline);
}
}
else // mod 20130227 Add to newPolys regardless of whether an intersection exists, otherwise dangling lines would be gone.
{
newPolys.Add(poly.Clone() as Polyline);
}
pm.MeterProgress();
}
});
pm.Stop();
if (newPolys.Count > 0)
{
newPolys.ToArray().AddToCurrentSpace();
ids.QForEach(entity => entity.Erase());
}
Interaction.WriteLine("Broke {0} to {1}.", ids.Length, newPolys.Count);
}
public static void PolySplit()
{
ObjectId[] ids = Interaction.GetSelection("\nSelect polyline", "LWPOLYLINE");
List <Polyline> newPolys = new List <Polyline>();
ProgressMeter pm = new ProgressMeter();
pm.Start("Processing...");
pm.SetLimit(ids.Length);
ids.QOpenForWrite <Polyline>(list =>
{
foreach (var poly in list)
{
Point3dCollection intersectPoints = new Point3dCollection();
foreach (var poly1 in list)
{
if (poly1 != poly)
{
poly.IntersectWith3264(poly1, Intersect.OnBothOperands, intersectPoints);
}
}
var ipParams = intersectPoints.Cast <Point3d>().Select(ip => poly.GetParamAtPointX(ip)).OrderBy(param => param).ToArray();
if (intersectPoints.Count > 0)
{
var curves = poly.GetSplitCurves(new DoubleCollection(ipParams));
foreach (var curve in curves)
{
newPolys.Add(curve as Polyline);
}
}
else // mod 20130227 不管有无交点，都要添加到newPolys，否则孤立线将消失。
{
newPolys.Add(poly.Clone() as Polyline);
}
pm.MeterProgress();
}
});
pm.Stop();
if (newPolys.Count > 0)
{
newPolys.ToArray().AddToCurrentSpace();
ids.QForEach(x => x.Erase());
}
Interaction.WriteLine("Broke {0} to {1}.", ids.Length, newPolys.Count);
}
/// <summary>
/// Определение зон теней от дома, который выше расчетной линии тени - по линии через 0
/// </summary>
/// <param name="build"></param>
/// <returns></returns>
private IIlluminationArea GetBuildingZeroLineShadows(MapBuilding build)
{
using (var lineZero = new Line(ptCalc, new Point3d(ptCalc.X + 100, ptCalc.Y, 0)))
{
#if TEST
//EntityHelper.AddEntityToCurrentSpace(lineZero);
#endif
var ptsIntersects = new Point3dCollection();
using (var plane = new Plane())
{
lineZero.IntersectWith(build.Contour, Intersect.ExtendThis, plane, ptsIntersects, IntPtr.Zero, IntPtr.Zero);
var pts = build.Contour.GetPoints().Where(p => p.Y < ptCalc.Y).ToList();
pts.AddRange(ptsIntersects.Cast <Point3d>().Select(s => s.Convert2d()));
if (pts.Any())
{
var ilumShadow = GetIllumShadow(pts);
return(ilumShadow);
}
}
}
return(null);
}
public static bool DetectDuplicatePoint(Point3dCollection points, Point3d point)
{
return(points.Cast <Point3d>().Any(existing => DetectDuplicatePoint(existing, point)));
}
private bool CorrectStartAnglesByOwnerZeroHorLineIntersects(out List <Point3d> ptsIntersectShadow)
{
ptsIntersectShadow = new List <Point3d> ();
bool isCorrect = true;
var contour = buildingOwner.Contour;
// Линия через точку ноль - Горизонтально
using (var lineZero = new Line(ptCalc, new Point3d(ptCalc.X + 1, ptCalc.Y, 0)))
{
// Линия тени - пересечение собственного дома с ней?
double yShadowLine;
var ptHeightCalc = GetPtCalcHeight();
var buildHeightCalc = GetHeightCalcBuilding(ptHeightCalc, buildingOwner.HeightCalc);
using (var lineShadow = GetLineShadow(buildHeightCalc))
{
yShadowLine = lineShadow.StartPoint.Y;
#if TEST
//EntityHelper.AddEntityToCurrentSpace(lineShadow);
#endif
using (var ptsIntersect = new Point3dCollection())
{
using (var plane = new Plane())
{
contour.IntersectWith(lineShadow, Intersect.OnBothOperands, plane, ptsIntersect, IntPtr.Zero, IntPtr.Zero);
ptsIntersectShadow = ptsIntersect.Cast <Point3d>().ToList();
}
// !!!??? Если есть пересечения с линией тени, тогда нужно разделить полилинию дома на собственную часть и внешнюю (которую считать отдельно)
}
if (ptsIntersectShadow.Count > 1)
{
// Отсечение части дома - по точкам пересечения.
List <Polyline> plsSecant;
if (contour.Separate(ptCalc, ptsIntersectShadow, out plHead, out plsSecant))
{
if (plHead != null)
{
contour = plHead;
}
// из отсеченных частей сделать здания для дальнейшего расчета - когда будут перебираться внешние дома при расчете точки
if (plsSecant != null && plsSecant.Any())
{
secantBuildings = MapBuilding.CreateFakeBuildings(plsSecant, buildingOwner);
}
}
}
}
#if TEST
//EntityHelper.AddEntityToCurrentSpace(lineZero);
#endif
List <Point3d> ptsIntersectZero;
using (var ptsIntersect = new Point3dCollection())
{
contour.IntersectWith(lineZero, Intersect.ExtendArgument, new Plane(), ptsIntersect, IntPtr.Zero, IntPtr.Zero);
ptsIntersectZero = ptsIntersect.Cast <Point3d>().OrderBy(o => o.X).ToList();
}
// Разделить точки левее стартовой и правее (Запад/Восток) - для каждой петли свойестороны найти максимальный ограничивающий угол.
double westAngle;
if (GetStartAngleBySideIntersects(contour, ptsIntersectZero, ptsIntersectShadow, yShadowLine, false, true, false, out westAngle))
{
if (westAngle < StartAnglesIllum.AngleEndOnPlane)
{
StartAnglesIllum.AngleEndOnPlane = westAngle;
}
}
else
{
isCorrect = false;
}
double eastAngle;
if (GetStartAngleBySideIntersects(contour, ptsIntersectZero, ptsIntersectShadow, yShadowLine, true, true, false, out eastAngle))
{
if (eastAngle > StartAnglesIllum.AngleStartOnPlane)
{
StartAnglesIllum.AngleStartOnPlane = eastAngle;
}
}
else
{
isCorrect = false;
}
}
return(isCorrect);
}
private List <IIlluminationArea> GetBuildingLineShadowBoundary(MapBuilding build, Line lineShadow,
Intersect intersectMode)
{
var resIlumsShadows = new List <IIlluminationArea>();
if (lineShadow.Length < 1)
{
return(resIlumsShadows);
}
// Дом на границе тени, нужно строить линию пересечения с домом
var ptsIntersects = new Point3dCollection();
using (var plane = new Plane())
{
lineShadow.IntersectWith(build.Contour, intersectMode, plane, ptsIntersects, IntPtr.Zero, IntPtr.Zero);
}
// Точки пересечения дома с нулевой линей
var ptsZeroIntersects = GetZeroLineIntersects(build);
// Между каждыми точками пересечения определение петли полилинии и определение тени
if (ptsIntersects.Count > 1)
{
var ptsItersectSort = ptsIntersects.Cast <Point3d>().OrderBy(o => o.X);
var ptIntersectPrew = ptsItersectSort.First();
foreach (var ptIntersect in ptsItersectSort.Skip(1))
{
// Если средняя точка внутри полилинии
if (build.Contour.IsPointInsidePolygon(ptIntersect.Center(ptIntersectPrew)))
{
// Точки петли выше
try
{
var ptsLoopAbove = build.Contour.GetLoopSideBetweenHorizontalIntersectPoints(
ptIntersectPrew, ptIntersect, true, true).
Where(p => p.Y <= ptCalc.Y && p.Y >= lineShadow.StartPoint.Y).ToList();
ptsLoopAbove.AddRange(ptsZeroIntersects);
var ilumShadow = GetIllumShadow(ptsLoopAbove);
if (ilumShadow != null)
{
resIlumsShadows.Add(ilumShadow);
}
}
catch (Exception ex)
{
Logger.Log.Error(ex, "В методе GetBuildingLineShadowBoundary вызов build.Contour.GetLoopSideBetweenHorizontalIntersectPoints()");
}
}
ptIntersectPrew = ptIntersect;
}
}
//// Точки выше найденного пересечения
//var ptsContour = build.Contour.GetPoints();
//var ptsAboveLine = ptsContour.Where(p => p.Y >= lineShadow.StartPoint.Y).ToList();
//foreach (Point3d item in ptsIntersects)
//{
// ptsAboveLine.Add(item.Convert2d());
//}
//var ilumShadow = GetIllumShadow(ptsAboveLine);
//if (ilumShadow != null)
//{
// resIlumsShadows.Add(ilumShadow);
//}
return(resIlumsShadows);
}
/// <summary>
/// Removes duplicated points in the collection according to the specified tolerance.
/// </summary>
/// <param name="source">The instance to which the method applies.</param>
/// <param name="tolerance">The tolerance to be used in equality comparison.</param>
/// <returns>A sequence of disitnct points.</returns>
public static IEnumerable <Point3d> RemoveDuplicates(this Point3dCollection source, Tolerance tolerance)
{
return(source.Cast <Point3d>().Distinct(new Point3dComparer()));
}
/// <summary>
/// Removes duplicated points in the collection using Tolerance.Global.
/// </summary>
/// <param name="source">The instance to which the method applies.</param>
/// <returns>A sequence of distinct points.</returns>
public static IEnumerable <Point3d> RemoveDuplicates(this Point3dCollection source)
{
return(source.Cast <Point3d>().RemoveDuplicates(Tolerance.Global));
}
/// <summary>
/// Gets the extents 3d for the point collection.
/// </summary>
/// <param name="pts">The instance to which the method applies.</param>
/// <returns>An Extents3d instance.</returns>
/// <exception cref="ArgumentException">
/// ArgumentException is thrown if the collection is null or empty.</exception>
public static Extents3d ToExtents3d(this Point3dCollection pts)
{
return(pts.Cast <Point3d>().ToExtents3d());
}
