public static void Build(DynamicMeshGenericMultiMaterialMesh _mesh, BuildrData _data)
{
// timestart = Time.realtimeSinceStartup;
data = _data;
mesh = _mesh;
textures = data.textures.ToArray();
BuildrPlan plan = data.plan;
int facadeIndex = 0;
numberOfFacades = 0;
int numberOfVolumes = data.plan.numberOfVolumes;
LogTimer("Start");
//define rectangles that represent the facades
packedTexturePositions.Clear();
for (int v = 0; v < numberOfVolumes; v++)
{
BuildrVolume volume = plan.volumes[v];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexA = f;
int indexB = (f < numberOfVolumePoints - 1) ? f + 1 : 0;
Vector2z p0 = plan.points[volume.points[indexA]];
Vector2z p1 = plan.points[volume.points[indexB]];
float facadeWidth = Vector2z.Distance(p0, p1) * PIXELS_PER_METER;
int floorBase = plan.GetFacadeFloorHeight(v, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)//no facade - adjacent facade is taller and covers this one
{
continue;
}
float floorHeight = data.floorHeight;
float facadeHeight = (volume.numberOfFloors - floorBase) * floorHeight * PIXELS_PER_METER;
if (facadeHeight < 0)
{
facadeWidth = 0;
facadeHeight = 0;
}
Rect newFacadeRect = new Rect(0, 0, facadeWidth, facadeHeight);
packedTexturePositions.Add(newFacadeRect);
numberOfFacades++;
}
}
//Build ROOF
DynamicMeshGenericMultiMaterialMesh dynMeshRoof = new DynamicMeshGenericMultiMaterialMesh();
dynMeshRoof.name = "Roof Mesh";
dynMeshRoof.subMeshCount = textures.Length;
BuildrRoof.Build(dynMeshRoof, data, true);
dynMeshRoof.CheckMaxTextureUVs(data);
LogTimer("Roof A");
roofTextures.Clear();
roofTextureIndex.Clear();
foreach (BuildrRoofDesign roofDesign in data.roofs)
{
foreach (int textureIndex in roofDesign.textureValues)
{
if (!roofTextureIndex.Contains(textureIndex))
{
BuildrTexture bTexture = data.textures[textureIndex];
Vector2 largestSubmeshPlaneSize = new Vector2(1, 1);
Vector2 minWorldUvSize = dynMeshRoof.MinWorldUvSize(textureIndex);
Vector2 maxWorldUvSize = dynMeshRoof.MaxWorldUvSize(textureIndex);
largestSubmeshPlaneSize.x = maxWorldUvSize.x - minWorldUvSize.x;
largestSubmeshPlaneSize.y = maxWorldUvSize.y - minWorldUvSize.y;
int roofTextureWidth = Mathf.RoundToInt(largestSubmeshPlaneSize.x * PIXELS_PER_METER);
int roofTextureHeight = Mathf.RoundToInt(largestSubmeshPlaneSize.y * PIXELS_PER_METER);
Rect newRoofTexutureRect = new Rect(0, 0, roofTextureWidth, roofTextureHeight);
packedTexturePositions.Add(newRoofTexutureRect);
roofTextures.Add(bTexture);
roofTextureIndex.Add(textureIndex);
}
}
}
//run a custom packer to define their postions
textureWidth = RectanglePack.Pack(packedTexturePositions, ATLAS_PADDING);
//determine the resize scale and apply that to the rects
packedScale = 1;
int numberOfRects = packedTexturePositions.Count;
if (textureWidth > MAXIMUM_TEXTURESIZE)
{
packedScale = MAXIMUM_TEXTURESIZE / (float)textureWidth;
for (int i = 0; i < numberOfRects; i++)
{
Rect thisRect = packedTexturePositions[i];
thisRect.x *= packedScale;
thisRect.y *= packedScale;
thisRect.width *= packedScale;
thisRect.height *= packedScale;
packedTexturePositions[i] = thisRect;
//Debug.Log("Rects "+roofTextures[i-+packedTexturePositions[i]);
}
textureWidth = Mathf.RoundToInt(packedScale * textureWidth);
}
else
{
textureWidth = (int)Mathf.Pow(2, (Mathf.FloorToInt(Mathf.Log(textureWidth - 1, 2)) + 1));//find the next power of two
}
//Debug.Log("Texture Width "+textureWidth);
//TODO: maybe restrict the resize to a power of two?
LogTimer("Packed Rect Generated");
textureSize = textureWidth * textureWidth;
colourArray = new Color32[textureSize];
//TestRectColours();//this test paints all the facades with rainbow colours - real pretty
BuildTextures();
LogTimer("texture created");
Texture2D packedTexture = new Texture2D(textureWidth, textureWidth, TextureFormat.ARGB32, true);
packedTexture.filterMode = FilterMode.Bilinear;
packedTexture.SetPixels32(colourArray);
packedTexture.Apply(true, false);
LogTimer("apply");
if (data.LODTextureAtlas != null)
{
Object.DestroyImmediate(data.LODTextureAtlas);
}
data.LODTextureAtlas = packedTexture;
data.LODTextureAtlas.name = "Low Detail Texture";
//build the model with new uvs
if (data.drawUnderside)
{
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
Vector3[] newEndVerts = new Vector3[numberOfVolumePoints];
Vector2[] newEndUVs = new Vector2[numberOfVolumePoints];
for (int i = 0; i < numberOfVolumePoints; i++)
{
newEndVerts[i] = plan.points[volume.points[i]].vector3;
newEndUVs[i] = Vector2.zero;
}
List <int> tris = new List <int>(data.plan.GetTrianglesBySectorBase(s));
tris.Reverse();
mesh.AddData(newEndVerts, newEndUVs, tris.ToArray(), 0);
}
}
LogTimer("Floor");
//Build facades
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexA = f;
int indexB = (f < numberOfVolumePoints - 1) ? f + 1 : 0;
Vector3 p0 = plan.points[volume.points[indexA]].vector3;
Vector3 p1 = plan.points[volume.points[indexB]].vector3;
int floorBase = plan.GetFacadeFloorHeight(s, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)
{
//no facade - adjacent facade is taller and covers this one
continue;
}
float floorHeight = data.floorHeight;
Vector3 floorHeightStart = Vector3.up * (floorBase * floorHeight);
Vector3 wallHeight = Vector3.up * (volume.numberOfFloors * floorHeight) - floorHeightStart;
p0 += floorHeightStart;
p1 += floorHeightStart;
Vector3 w0 = p0;
Vector3 w1 = p1;
Vector3 w2 = w0 + wallHeight;
Vector3 w3 = w1 + wallHeight;
Rect facadeRect = packedTexturePositions[facadeIndex];
float imageSize = textureWidth;
Vector2 uvMin = new Vector2(facadeRect.xMin / imageSize, facadeRect.yMin / imageSize);
Vector2 uvMax = new Vector2(facadeRect.xMax / imageSize, facadeRect.yMax / imageSize);
mesh.AddPlane(w0, w1, w2, w3, uvMin, uvMax, 0);
facadeIndex++;
}
}
LogTimer("Facades");
//ROOF Textures
int roofRectBase = numberOfFacades;
List <Rect> newAtlasRects = new List <Rect>();
for (int i = roofRectBase; i < packedTexturePositions.Count; i++)
{
Rect uvRect = new Rect();//generate a UV based rectangle off the packed one
uvRect.x = packedTexturePositions[i].x / textureWidth;
uvRect.y = packedTexturePositions[i].y / textureWidth;
uvRect.width = packedTexturePositions[i].width / textureWidth;
uvRect.height = packedTexturePositions[i].height / textureWidth;
newAtlasRects.Add(uvRect);
}
dynMeshRoof.Atlas(roofTextureIndex.ToArray(), newAtlasRects.ToArray(), data.textures.ToArray());
//Add the atlased mesh data to the main model data at submesh 0
mesh.AddData(dynMeshRoof.vertices, dynMeshRoof.uv, dynMeshRoof.triangles, 0);
LogTimer("Roof B");
data = null;
mesh = null;
textures = null;
//atlasRects = null;
LogTimer("Done");
System.GC.Collect();
}
public static void Build(DynamicMeshGenericMultiMaterialMesh _mesh, BuildrData _data)
{
// timestart = Time.realtimeSinceStartup;
data = _data;
mesh = _mesh;
textures = data.textures.ToArray();
BuildrPlan plan = data.plan;
// int facadeIndex = 0;
numberOfFacades = 0;
int numberOfVolumes = data.plan.numberOfVolumes;
//define rectangles that represent the facades
packedTexturePositions.Clear();
for (int v = 0; v < numberOfVolumes; v++)
{
BuildrVolume volume = plan.volumes[v];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexA = f;
int indexB = (f < numberOfVolumePoints - 1) ? f + 1 : 0;
Vector2z p0 = plan.points[volume.points[indexA]];
Vector2z p1 = plan.points[volume.points[indexB]];
float facadeWidth = Vector2z.Distance(p0, p1) * PIXELS_PER_METER;
int floorBase = plan.GetFacadeFloorHeight(v, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)//no facade - adjacent facade is taller and covers this one
{
continue;
}
float floorHeight = data.floorHeight;
float facadeHeight = (volume.numberOfFloors - floorBase) * floorHeight * PIXELS_PER_METER;
if (facadeHeight < 0)
{
facadeWidth = 0;
facadeHeight = 0;
}
Rect newFacadeRect = new Rect(0, 0, facadeWidth, facadeHeight);
packedTexturePositions.Add(newFacadeRect);
numberOfFacades++;
}
}
//Build ROOF
DynamicMeshGenericMultiMaterialMesh dynMeshRoof = new DynamicMeshGenericMultiMaterialMesh();
dynMeshRoof.name = "Roof Mesh";
dynMeshRoof.subMeshCount = textures.Length;
BuildrRoof.Build(dynMeshRoof, data, true);
dynMeshRoof.CheckMaxTextureUVs(data);
roofTextures.Clear();
roofTextureIndex.Clear();
foreach (BuildrRoofDesign roofDesign in data.roofs)
{
foreach (int textureIndex in roofDesign.textureValues)
{
if (!roofTextureIndex.Contains(textureIndex))
{
BuildrTexture bTexture = data.textures[textureIndex];
Vector2 largestSubmeshPlaneSize = new Vector2(1, 1);
Vector2 minWorldUvSize = dynMeshRoof.MinWorldUvSize(textureIndex);
Vector2 maxWorldUvSize = dynMeshRoof.MaxWorldUvSize(textureIndex);
largestSubmeshPlaneSize.x = maxWorldUvSize.x - minWorldUvSize.x;
largestSubmeshPlaneSize.y = maxWorldUvSize.y - minWorldUvSize.y;
int roofTextureWidth = Mathf.RoundToInt(largestSubmeshPlaneSize.x * PIXELS_PER_METER);
int roofTextureHeight = Mathf.RoundToInt(largestSubmeshPlaneSize.y * PIXELS_PER_METER);
Rect newRoofTexutureRect = new Rect(0, 0, roofTextureWidth, roofTextureHeight);
packedTexturePositions.Add(newRoofTexutureRect);
roofTextures.Add(bTexture);
roofTextureIndex.Add(textureIndex);
}
}
}
//run a custom packer to define their postions
textureWidth = RectanglePack.Pack(packedTexturePositions, ATLAS_PADDING);
//determine the resize scale and apply that to the rects
packedScale = 1;
int numberOfRects = packedTexturePositions.Count;
if (textureWidth > MAXIMUM_TEXTURESIZE)
{
packedScale = MAXIMUM_TEXTURESIZE / (float)textureWidth;
for (int i = 0; i < numberOfRects; i++)
{
Rect thisRect = packedTexturePositions[i];
thisRect.x *= packedScale;
thisRect.y *= packedScale;
thisRect.width *= packedScale;
thisRect.height *= packedScale;
packedTexturePositions[i] = thisRect;
//Debug.Log("Rects "+roofTextures[i-+packedTexturePositions[i]);
}
textureWidth = Mathf.RoundToInt(packedScale * textureWidth);
}
else
{
textureWidth = (int)Mathf.Pow(2, (Mathf.FloorToInt(Mathf.Log(textureWidth - 1, 2)) + 1));//find the next power of two
}
textureSize = textureWidth * textureWidth;
colourArray = new Color32[textureSize];
//TestRectColours();//this test paints all the facades with rainbow colours - real pretty
BuildTextures();
Texture2D packedTexture = new Texture2D(textureWidth, textureWidth, TextureFormat.ARGB32, true);
packedTexture.filterMode = FilterMode.Bilinear;
packedTexture.SetPixels32(colourArray);
packedTexture.Apply(true, false);
if (data.OneDrawCallTexture != null)
{
Object.DestroyImmediate(data.OneDrawCallTexture);
}
data.OneDrawCallTexture = packedTexture;
data.OneDrawCallTexture.name = "One Draw Call Texture";
int numberOfRoofTextures = roofTextures.Count - 1;
List <Rect> facadeTexturePositions = new List <Rect>(packedTexturePositions);
Debug.Log(numberOfRoofTextures);
facadeTexturePositions.RemoveRange(packedTexturePositions.Count - numberOfRoofTextures, numberOfRoofTextures);
BuildrBuilding.Build(mesh, data, facadeTexturePositions.ToArray());
data = null;
mesh = null;
textures = null;
System.GC.Collect();
}
private static void BuildTextures()
{
List <TexturePaintObject> buildSourceTextures = new List <TexturePaintObject>();
foreach (BuildrTexture btexture in data.textures)//Gather the source textures, resized into Color32 arrays
{
TexturePaintObject texturePaintObject = new TexturePaintObject();
texturePaintObject.pixels = ((Texture2D)btexture.texture).GetPixels32();
texturePaintObject.width = btexture.texture.width;
texturePaintObject.height = btexture.texture.height;
texturePaintObject.tiles = new Vector2(btexture.tiledX, btexture.tiledY);
if (btexture.tiled)
{
int resizedTextureWidth = Mathf.RoundToInt(btexture.textureUnitSize.x * PIXELS_PER_METER * packedScale);
int resizedTextureHeight = Mathf.RoundToInt(btexture.textureUnitSize.y * PIXELS_PER_METER * packedScale);
texturePaintObject.pixels = TextureScale.NearestNeighbourSample(texturePaintObject.pixels, texturePaintObject.width, texturePaintObject.height, resizedTextureWidth, resizedTextureHeight);
texturePaintObject.width = resizedTextureWidth;
texturePaintObject.height = resizedTextureHeight;
}
else
{
texturePaintObject.tiled = false;
}
buildSourceTextures.Add(texturePaintObject);
}
LogTimer("Gather Source into Arrays");
TexturePaintObject[] sourceTextures = buildSourceTextures.ToArray();
textures = data.textures.ToArray();
BuildrFacadeDesign facadeDesign = data.facades[0];
BuildrPlan plan = data.plan;
int numberOfVolumes = data.plan.numberOfVolumes;
int facadeNumber = 0;
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexA, indexB;
Vector3 p0, p1;
indexA = f;
indexB = (f < numberOfVolumePoints - 1) ? f + 1 : 0;
p0 = plan.points[volume.points[indexA]].vector3;
p1 = plan.points[volume.points[indexB]].vector3;
Rect packedPosition = packedTexturePositions[facadeNumber];
float facadeWidth = Vector3.Distance(p0, p1);
int floorBase = plan.GetFacadeFloorHeight(s, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)
{
//no facade - adjacent facade is taller and covers this one
continue;
}
float floorHeight = data.floorHeight;
BuildrVolumeStylesUnit[] styleUnits = volume.styles.GetContentsByFacade(volume.points[indexA]);
int floorPatternSize = 0;
List <int> facadePatternReference = new List <int>(); //this contains a list of all the facade style indices to refence when looking for the appropriate style per floor
int patternCount = 0;
foreach (BuildrVolumeStylesUnit styleUnit in styleUnits) //need to knw how big all the styles are together so we can loop through them
{
floorPatternSize += styleUnit.floors;
for (int i = 0; i < styleUnit.floors; i++)
{
facadePatternReference.Add(patternCount);
}
patternCount++;
}
facadePatternReference.Reverse();
int rows = numberOfFloors;
Vector2 bayBase = Vector2.zero;
float currentFloorBase = 0;
for (int r = 0; r < rows; r++)
{
currentFloorBase = floorHeight * r;
int modFloor = (r % floorPatternSize);
facadeDesign = data.facades[styleUnits[facadePatternReference[modFloor]].styleID];
bool isBlankWall = !facadeDesign.hasWindows;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
BuildrBay firstBay = data.bays[facadeDesign.bayPattern[0]];
if (firstBay.openingWidth > facadeWidth)
{
isBlankWall = true;
}
if (facadeDesign.bayPattern.Count == 0)
{
isBlankWall = true;
}
}
else
{
if (facadeDesign.simpleBay.openingWidth + facadeDesign.simpleBay.minimumBayWidth > facadeWidth)
{
isBlankWall = true;
}
}
if (!isBlankWall)
{
float patternSize = 0;//the space the pattern fills, there will be a gap that will be distributed to all bay styles
int numberOfBays = 0;
BuildrBay[] bays;
int numberOfBayDesigns = 0;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
numberOfBayDesigns = facadeDesign.bayPattern.Count;
bays = new BuildrBay[numberOfBayDesigns];
for (int i = 0; i < numberOfBayDesigns; i++)
{
bays[i] = data.bays[facadeDesign.bayPattern[i]];
}
}
else
{
bays = new[] { facadeDesign.simpleBay };
numberOfBayDesigns = 1;
}
//start with first window width - we'll be adding to this until we have filled the facade width
int it = 100;
while (true)
{
int patternModIndex = numberOfBays % numberOfBayDesigns;
float patternAddition = bays[patternModIndex].openingWidth + bays[patternModIndex].minimumBayWidth;
if (patternSize + patternAddition < facadeWidth)
{
patternSize += patternAddition;
numberOfBays++;
}
else
{
break;
}
it--;
if (it < 0)
{
break;
}
}
float perBayAdditionalSpacing = (facadeWidth - patternSize) / numberOfBays;
float windowXBase = 0;
for (int c = 0; c < numberOfBays; c++)
{
BuildrBay bayStyle;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
int numberOfBayStyles = facadeDesign.bayPattern.Count;
bayStyle = bays[c % numberOfBayStyles];
}
else
{
bayStyle = facadeDesign.simpleBay;
}
float actualWindowSpacing = bayStyle.minimumBayWidth + perBayAdditionalSpacing;
float leftSpace = actualWindowSpacing * bayStyle.openingWidthRatio;
float rightSpace = actualWindowSpacing - leftSpace;
float openingSpace = bayStyle.openingWidth;
Vector3 bayDimensions;
int subMesh;
bool flipped;
if (!bayStyle.isOpening)
{
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.WallTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.WallTexture);
bayBase.x = windowXBase;
bayBase.y = currentFloorBase;
float bayWidth = (openingSpace + actualWindowSpacing);
float bayHeight = floorHeight;
bayDimensions = new Vector2(bayWidth, bayHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
windowXBase += bayWidth; //move base vertor to next bay
continue; //bay filled - move onto next bay
}
float rowBottomHeight = ((floorHeight - bayStyle.openingHeight) * bayStyle.openingHeightRatio);
float rowTopHeight = (floorHeight - rowBottomHeight - bayStyle.openingHeight);
//Window
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.OpeningBackTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.OpeningBackTexture);
bayBase.x = windowXBase + leftSpace;
bayBase.y = currentFloorBase + rowBottomHeight;
bayDimensions = new Vector2(bayStyle.openingWidth, bayStyle.openingHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
//Column Left
if (leftSpace > 0)
{
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.ColumnTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.ColumnTexture);
bayBase.x = windowXBase;
bayBase.y = currentFloorBase + rowBottomHeight;
bayDimensions = new Vector2(leftSpace, bayStyle.openingHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
//Column Right
if (rightSpace > 0)
{
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.ColumnTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.ColumnTexture);
bayBase.x = windowXBase + leftSpace + openingSpace;
bayBase.y = currentFloorBase + rowBottomHeight;
bayDimensions = new Vector2(rightSpace, bayStyle.openingHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
//Row Bottom
if (rowBottomHeight > 0)
{
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.RowTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.RowTexture);
bayBase.x = windowXBase + leftSpace;
bayBase.y = currentFloorBase;
bayDimensions = new Vector2(openingSpace, rowBottomHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
//Row Top
if (rowTopHeight > 0)
{
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.RowTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.RowTexture);
bayBase.x = windowXBase + leftSpace;
bayBase.y = currentFloorBase + rowBottomHeight + bayStyle.openingHeight;
bayDimensions = new Vector2(openingSpace, rowTopHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
//Cross Left
if (leftSpace > 0)
{
//Cross Left Bottom
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.CrossTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.CrossTexture);
bayBase.x = windowXBase;
bayBase.y = currentFloorBase;
bayDimensions = new Vector2(leftSpace, rowBottomHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
//Cross Left Top
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.CrossTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.CrossTexture);
bayBase.x = windowXBase;
bayBase.y = currentFloorBase + rowBottomHeight + bayStyle.openingHeight;
bayDimensions = new Vector2(leftSpace, rowTopHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
//Cross Right
if (rightSpace > 0)
{
//Cross Left Bottom
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.CrossTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.CrossTexture);
bayBase.x = windowXBase + leftSpace + openingSpace;
bayBase.y = currentFloorBase;
bayDimensions = new Vector2(rightSpace, rowBottomHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
//Cross Left Top
subMesh = bayStyle.GetTexture(BuildrBay.TextureNames.CrossTexture);
flipped = bayStyle.IsFlipped(BuildrBay.TextureNames.CrossTexture);
bayBase.x = windowXBase + leftSpace + openingSpace;
bayBase.y = currentFloorBase + rowBottomHeight + bayStyle.openingHeight;
bayDimensions = new Vector2(rightSpace, rowTopHeight);
DrawFacadeTexture(sourceTextures, bayBase, bayDimensions, subMesh, flipped, packedPosition);
}
windowXBase += leftSpace + openingSpace + rightSpace;//move base vertor to next bay
}
}
else
{
// windowless wall
int subMesh = facadeDesign.simpleBay.GetTexture(BuildrBay.TextureNames.WallTexture);
bool flipped = facadeDesign.simpleBay.IsFlipped(BuildrBay.TextureNames.WallTexture);
bayBase.x = 0;
bayBase.y = currentFloorBase;
Vector2 dimensions = new Vector2(facadeWidth, floorHeight);
DrawFacadeTexture(sourceTextures, bayBase, dimensions, subMesh, flipped, packedPosition);
}
}
facadeNumber++;
}
}
LogTimer("generate facade textures");
//add roof textures
int numberOfroofTextures = roofTextures.Count;
int scaledPadding = Mathf.FloorToInt(ATLAS_PADDING * packedScale);
for (int i = 0; i < numberOfroofTextures; i++)
{
Rect roofTexturePosition = packedTexturePositions[i + facadeNumber];
BuildrTexture bTexture = roofTextures[i];
int roofTextureWidth = bTexture.texture.width;
int roofTextureHeight = bTexture.texture.height;
int targetTextureWidth = Mathf.RoundToInt(roofTexturePosition.width);
int targetTextureHeight = Mathf.RoundToInt(roofTexturePosition.height);
if (bTexture.maxUVTile == Vector2.zero)
{
LogTimer("BuildTextures: Skip texture " + bTexture.name + " as it appears it's not used");
continue;
}
int sourceTextureWidth = Mathf.RoundToInt(targetTextureWidth / (bTexture.tiled ? bTexture.maxUVTile.x : bTexture.tiledX));
int sourceTextureHeight = Mathf.RoundToInt(targetTextureHeight / (bTexture.tiled ? bTexture.maxUVTile.y : bTexture.tiledY));
int sourceTextureSize = sourceTextureWidth * sourceTextureHeight;
if (sourceTextureSize == 0)
{
//Debug.Log(sourceTextureWidth+" "+sourceTextureHeight+" "+bTexture.tiledX+" "+bTexture.maxUVTile+" "+bTexture.tiledX+","+bTexture.tiledY);
continue;
}
Color32[] roofColourArray = TextureScale.NearestNeighbourSample(((Texture2D)bTexture.texture).GetPixels32(), roofTextureWidth, roofTextureHeight, sourceTextureWidth, sourceTextureHeight);
//Color32[] roofColourArray = bTexture.texture.GetPixels32();
for (int x = 0; x < targetTextureWidth; x++)
{
for (int y = 0; y < targetTextureHeight; y++)
{
int drawX = Mathf.FloorToInt(x + roofTexturePosition.x);
int drawY = Mathf.FloorToInt(y + roofTexturePosition.y);
int colourIndex = drawX + drawY * textureWidth;
int sx = x % sourceTextureWidth;
int sy = y % sourceTextureHeight;
int sourceIndex = sx + sy * sourceTextureWidth;
if (sourceIndex >= sourceTextureSize)
{
Debug.Log("Source Index too big " + sx + " " + sy + " " + sourceTextureWidth + " " + sourceTextureSize + " " + bTexture.maxUVTile + " " + bTexture.name);
}
Color32 sourceColour = roofColourArray[sourceIndex];
if (colourIndex >= textureSize)
{
Debug.Log("Output Index Too big " + drawX + " " + drawY + " " + colourIndex + " " + textureSize + " " + roofTexturePosition);
}
colourArray[colourIndex] = sourceColour;
//Padding
if (x == 0)
{
for (int p = 0; p < scaledPadding; p++)
{
colourArray[colourIndex - p] = sourceColour;
}
}
if (x == targetTextureWidth - 1)
{
for (int p = 0; p < scaledPadding; p++)
{
colourArray[colourIndex + p] = sourceColour;
}
}
if (y == 0)
{
for (int p = 0; p < scaledPadding; p++)
{
colourArray[colourIndex - (p * textureWidth)] = sourceColour;
}
}
if (y == targetTextureHeight - 1)
{
for (int p = 0; p < scaledPadding; p++)
{
colourArray[colourIndex + (p * textureWidth)] = sourceColour;
}
}
}
}
}
LogTimer("generate roof textures");
}
private static void BuildSimple(DynamicMeshGenericMultiMaterialMesh _mesh, BuildrData _data)
{
BuildrData data = _data;
DynamicMeshGenericMultiMaterialMesh mesh = _mesh;
BuildrPlan plan = data.plan;
int facadeIndex = 0;
int numberOfVolumes = data.plan.numberOfVolumes;
//Build Floor
if (data.drawUnderside)
{
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
Vector3[] newEndVerts = new Vector3[numberOfVolumePoints];
Vector2[] newEndUVs = new Vector2[numberOfVolumePoints];
for (int i = 0; i < numberOfVolumePoints; i++)
{
newEndVerts[i] = plan.points[volume.points[i]].vector3;
newEndUVs[i] = Vector2.zero;
}
List <int> tris = new List <int>(data.plan.GetTrianglesBySectorBase(s));
tris.Reverse();
mesh.AddData(newEndVerts, newEndUVs, tris.ToArray(), 0);
}
}
//Build ROOF
DynamicMeshGenericMultiMaterialMesh dynMeshRoof = new DynamicMeshGenericMultiMaterialMesh();
dynMeshRoof.subMeshCount = data.textures.Count;
BuildrRoof.Build(dynMeshRoof, data, true);
mesh.AddData(dynMeshRoof.vertices, dynMeshRoof.uv, dynMeshRoof.triangles, 0);
Vector3 foundationVector = Vector3.down * data.foundationHeight;
//Build facades
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
for (int l = 0; l < numberOfVolumePoints; l++)
{
int indexA = l;
int indexB = (l < numberOfVolumePoints - 1) ? l + 1 : 0;
Vector3 p0 = plan.points[volume.points[indexA]].vector3;
Vector3 p1 = plan.points[volume.points[indexB]].vector3;
int floorBase = plan.GetFacadeFloorHeight(s, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)
{
//no facade - adjacent facade is taller and covers this one
continue;
}
float floorHeight = data.floorHeight;
Vector3 floorHeightStart = Vector3.up * (floorBase * floorHeight);
Vector3 wallHeight = Vector3.up * (volume.numberOfFloors * floorHeight) - floorHeightStart;
p0 += floorHeightStart;
p1 += floorHeightStart;
Vector3 w0 = p0;
Vector3 w1 = p1;
Vector3 w2 = w0 + wallHeight;
Vector3 w3 = w1 + wallHeight;
if (floorBase == 0)
{
w0 += foundationVector;
w1 += foundationVector;
}
mesh.AddPlane(w0, w1, w2, w3, Vector2.zero, Vector2.zero, 0);
facadeIndex++;
}
}
data = null;
mesh = null;
}
public static void Build(DynamicMeshGenericMultiMaterialMesh _mesh, BuildrData _data, int volumeIndex)
{
data = _data;
mesh = _mesh;
mesh.name = "Interior Mesh Volume " + volumeIndex;
textures = data.textures.ToArray();
if (!data.renderInteriors)
{
return;
}
float largestDepthValue = 0;//deepest value of a bay design in the building
float tallestBay = 0;
foreach (BuildrBay bay in data.bays)
{
largestDepthValue = Mathf.Max(largestDepthValue, bay.deepestValue);//get the deepest value
tallestBay = Mathf.Max(tallestBay, bay.openingHeight + (data.floorHeight - bay.openingHeight) * bay.openingHeightRatio);
}
foreach (BuildrFacadeDesign facade in data.facades)
{
if (facade.type != BuildrFacadeDesign.types.simple)
{
continue;
}
largestDepthValue = Mathf.Max(largestDepthValue, facade.simpleBay.deepestValue);//get the deepest value
if (facade.simpleBay.isOpening)
{
tallestBay = Mathf.Max(tallestBay, facade.simpleBay.openingHeight + (data.floorHeight - facade.simpleBay.openingHeight) * facade.simpleBay.openingHeightRatio);
}
}
BuildrFacadeDesign facadeDesign = data.facades[0];
BuildrPlan plan = data.plan;
BuildrVolume volume = plan.volumes[volumeIndex];
int numberOfFloors = volume.numberOfFloors;
float floorHeight = data.floorHeight;
Vector3 floorHeightVector = Vector3.up * floorHeight;
float ceilingHeight = tallestBay + (floorHeight - tallestBay) * data.interiorCeilingHeight;
//Calculate the internal floor plan points
int numberOfVolumePoints = volume.points.Count;
Vector2z[] interiorVolumePoints = new Vector2z[numberOfVolumePoints];
for (int i = 0; i < numberOfVolumePoints; i++)
{
Vector3 lastPoint = plan.points[volume.points[(i > 0) ? i - 1 : numberOfVolumePoints - 1]].vector3;
Vector3 thisPoint = plan.points[volume.points[i]].vector3;
Vector3 nextPoint = plan.points[volume.points[(i + 1) % numberOfVolumePoints]].vector3;
Vector3 normalA = Vector3.Cross(thisPoint - lastPoint, Vector3.up).normalized;
Vector3 normalB = Vector3.Cross(nextPoint - thisPoint, Vector3.up).normalized;
Vector2z facadeALine = new Vector2z(thisPoint - lastPoint);
Vector2z facadeBLine = new Vector2z(thisPoint - nextPoint);
//Calculate facade inner origins for floors
Vector3 facadeOriginV3A = lastPoint + normalA * largestDepthValue;
Vector3 facadeOriginV3B = nextPoint + normalB * largestDepthValue;
Vector2z facadeOriginA = new Vector2z(facadeOriginV3A);
Vector2z facadeOriginB = new Vector2z(facadeOriginV3B);
Vector2z facadeLineIntersection = BuildrUtils.FindIntersection(facadeALine, facadeOriginA, facadeBLine, facadeOriginB);
interiorVolumePoints[i] = facadeLineIntersection;
}
List <Vector2z> interiorVolumePointList = new List <Vector2z>(interiorVolumePoints);
List <Rect> volumeCores = new List <Rect>();
List <int> linkedPoints = new List <int>();
foreach (Rect core in plan.cores)
{
Vector2z coreCenter = new Vector2z(core.center);
if (BuildrUtils.PointInsidePoly(coreCenter, interiorVolumePoints))
{
volumeCores.Add(core);
}
}
int numberOfVolumeCores = volumeCores.Count;
bool print = plan.volumes.IndexOf(volume) == 3;
for (int c = 0; c < numberOfVolumeCores; c++)
{
int numberOfInteriorPoints = interiorVolumePointList.Count;
Rect coreBounds = volumeCores[c];
Vector2z coreCenter = new Vector2z(coreBounds.center);
Vector2z coreBL = new Vector2z(coreBounds.xMin, coreBounds.yMin);
Vector2z coreBR = new Vector2z(coreBounds.xMax, coreBounds.yMin);
Vector2z coreTL = new Vector2z(coreBounds.xMin, coreBounds.yMax);
Vector2z coreTR = new Vector2z(coreBounds.xMax, coreBounds.yMax);
Vector2z[] corePointArray;
corePointArray = new[] { coreBL, coreBR, coreTR, coreTL };
//Find the nearest legal cut we can make to join the core and interior point poly
int connectingPoint = -1;
float connectingPointDistance = Mathf.Infinity;
for (int p = 0; p < numberOfInteriorPoints; p++)
{
if (linkedPoints.Contains(p))
{
continue;
}
Vector2z thisPoint = interiorVolumePointList[p];
float thisPointDistance = Vector2z.SqrMag(thisPoint, coreCenter);
if (thisPointDistance < connectingPointDistance)
{
bool legalCut = true;
for (int pc = 0; pc < numberOfInteriorPoints; pc++)
{
Vector2z p0 = interiorVolumePointList[pc];
Vector2z p1 = interiorVolumePointList[(pc + 1) % numberOfInteriorPoints];
if (BuildrUtils.FastLineIntersection(coreCenter, thisPoint, p0, p1))//check against all lines that this new cut doesn't intersect
{
if (print)
{
Debug.Log("FLI " + pc + " " + coreCenter + " " + thisPoint + " " + p0 + " " + p1);
}
legalCut = false;
break;
}
}
if (legalCut)
{
connectingPoint = p;
connectingPointDistance = thisPointDistance;
}
}
}
if (connectingPoint == -1)
{
Debug.Log("Buildr Could not place core");
continue;
}
Vector2z chosenPoint = interiorVolumePointList[connectingPoint];
int connectingCorePoint = 0;
float connectingCorePointDistance = Mathf.Infinity; // Vector2z.SqrMag(corePointArray[0], chosenPoint);
for (int cp = 0; cp < 4; cp++) //find the core point to make the cut
{
float thisCorePointDistance = Vector2z.SqrMag(corePointArray[cp], chosenPoint);
if (thisCorePointDistance < connectingCorePointDistance)
{
connectingCorePoint = cp;
connectingCorePointDistance = thisCorePointDistance;
}
}
interiorVolumePointList.Insert(connectingPoint, chosenPoint); //loop back on the floorplan to close it
for (int acp = 0; acp < 5; acp++) //loop back on itself to close the core
{
interiorVolumePointList.Insert(connectingPoint + 1, corePointArray[(connectingCorePoint + acp) % 4]);
}
for (int i = 0; i < linkedPoints.Count; i++)
{
if (linkedPoints[i] > connectingPoint)
{
linkedPoints[i] += 7;
}
}
linkedPoints.AddRange(new[] { connectingPoint, connectingPoint + 1, connectingPoint + 2, connectingPoint + 3, connectingPoint + 4, connectingPoint + 5, connectingPoint + 6 });
// linkedPoints.AddRange(new []{connectingPoint,connectingPoint+6});
}
// if(linkedPoints.Count > 0)
// Debug.Log(linkedPoints.Count+" "+linkedPoints[0]);
Vector2z[] interiorPointListCore = interiorVolumePointList.ToArray();
for (int f = 0; f < numberOfVolumePoints; f++)
{
///WALLS
int indexAM = Mathf.Abs((f - 1) % numberOfVolumePoints);
int indexA = f;
int indexB = (f + 1) % numberOfVolumePoints;
int indexBP = (f + 2) % numberOfVolumePoints;
Vector3 p0m = plan.points[volume.points[indexAM]].vector3;
Vector3 p0 = plan.points[volume.points[indexA]].vector3;
Vector3 p1 = plan.points[volume.points[indexB]].vector3;
Vector3 p1p = plan.points[volume.points[indexBP]].vector3;
Vector3 p0interior = interiorVolumePoints[indexA].vector3;
Vector3 p1interior = interiorVolumePoints[indexB].vector3;
float facadeWidth = Vector3.Distance(p0, p1) - largestDepthValue * 2.0f;
Vector3 facadeDirection = (p1 - p0).normalized;
Vector3 facadeCross = Vector3.Cross(facadeDirection, Vector3.up);
Vector3 lastFacadeDirection = (p0 - p0m).normalized;
Vector3 nextFacadeDirection = (p1p - p1).normalized;
//only bother with facade directions when facade may intersect inverted geometry
float facadeDirDotL = Vector3.Dot(-facadeDirection, lastFacadeDirection);
float facadeCrossDotL = Vector3.Dot(-facadeCross, lastFacadeDirection);
if (facadeDirDotL <= 0 || facadeCrossDotL <= 0)
{
lastFacadeDirection = -facadeCross;
}
float facadeDirDotN = Vector3.Dot(-facadeDirection, nextFacadeDirection);
float facadeCrossDotN = Vector3.Dot(-facadeCross, nextFacadeDirection);
if (facadeDirDotN <= 0 || facadeCrossDotN <= 0)
{
nextFacadeDirection = facadeCross;
}
int floorBase = plan.GetFacadeFloorHeight(volumeIndex, volume.points[indexA], volume.points[indexB]);
BuildrVolumeStylesUnit[] styleUnits = volume.styles.GetContentsByFacade(volume.points[indexA]);
int floorPatternSize = 0;
List <int> facadePatternReference = new List <int>(); //this contains a list of all the facade style indices to refence when looking for the appropriate style per floor
int patternCount = 0;
foreach (BuildrVolumeStylesUnit styleUnit in styleUnits) //need to knw how big all the styles are together so we can loop through them
{
floorPatternSize += styleUnit.floors;
for (int i = 0; i < styleUnit.floors; i++)
{
facadePatternReference.Add(patternCount);
}
patternCount++;
}
facadePatternReference.Reverse();
int rows = numberOfFloors;
Vector2 facadeUV = Vector2.zero;
for (int r = 0; r < rows; r++)
{
float currentFloorHeight = floorHeight * r;
Vector3 currentFloorHeightVector = Vector3.up * (data.floorHeight * r);
Vector3 facadeFloorBaseVector = p0 + Vector3.up * currentFloorHeight;
Vector3 ceilingVector = Vector3.up * ceilingHeight;
if (r < floorBase)
{
//no facade rendered
//facade gap filler
//interior gap points
Vector3 i0 = p1 - facadeDirection.normalized * largestDepthValue;
Vector3 i1 = p0 + facadeDirection.normalized * largestDepthValue;
Vector3 w0 = i0 + currentFloorHeightVector;
Vector3 w1 = i1 + currentFloorHeightVector;
Vector3 w2 = w0 + facadeCross * largestDepthValue;
Vector3 w3 = w1 + facadeCross * largestDepthValue;
Vector3 w4 = w0 + ceilingVector;
Vector3 w5 = w1 + ceilingVector;
Vector3 w6 = w2 + ceilingVector;
Vector3 w7 = w3 + ceilingVector;
Vector3 w8 = p1interior + currentFloorHeightVector;
Vector3 w9 = p0interior + currentFloorHeightVector;
Vector3 w10 = w8 + ceilingVector;
Vector3 w11 = w9 + ceilingVector;
//floor
AddData(new[] { w0, w1, w2, w3 }, new[] { 0, 1, 2, 1, 3, 2 }, volume.FloorTexture(r), false);
//ceiling
AddData(new[] { w5, w4, w7, w6 }, new[] { 0, 1, 2, 1, 3, 2 }, volume.CeilingTexture(r), false);
//sides
int wallSubmesh = volume.WallTexture(r);
AddPlane(w0, w2, w4, w6, wallSubmesh, false, Vector3.zero, new Vector2(largestDepthValue, floorHeight));
AddPlane(w3, w1, w7, w5, wallSubmesh, false, Vector3.zero, new Vector2(largestDepthValue, floorHeight));
//other gaps
float uvWidth1 = Vector3.Distance(w2, w8);
AddPlane(w2, w8, w6, w10, wallSubmesh, false, Vector3.zero, new Vector2(uvWidth1, floorHeight));
float uvWidth2 = Vector3.Distance(w3, w9);
AddPlane(w9, w3, w11, w7, wallSubmesh, false, Vector3.zero, new Vector2(uvWidth2, floorHeight));
continue;
}
//Get the facade style id
//need to loop through the facade designs floor by floor until we get to the right one
int modFloor = ((r - floorBase) % floorPatternSize);
facadeDesign = data.facades[styleUnits[facadePatternReference[modFloor]].styleID];
bool isBlankWall = !facadeDesign.hasWindows;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
if (data.bays.Count == 0 || facadeDesign.bayPattern.Count == 0)
{
data.illegal = true;
return;
}
BuildrBay firstBay = data.bays[facadeDesign.bayPattern[0]];
if (firstBay.openingWidth > facadeWidth)
{
isBlankWall = true;
}
if (facadeDesign.bayPattern.Count == 0)
{
isBlankWall = true;
}
}
else
{
if (facadeDesign.simpleBay.openingWidth + facadeDesign.simpleBay.minimumBayWidth > facadeWidth)
{
isBlankWall = true;
}
}
if (!isBlankWall)
{
float patternSize = 0;//the space the pattern fills, there will be a gap that will be distributed to all bay styles
int numberOfBays = 0;
BuildrBay[] bayDesignPattern;
int numberOfBayDesigns;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
numberOfBayDesigns = facadeDesign.bayPattern.Count;
bayDesignPattern = new BuildrBay[numberOfBayDesigns];
for (int i = 0; i < numberOfBayDesigns; i++)
{
bayDesignPattern[i] = data.bays[facadeDesign.bayPattern[i]];
}
}
else
{
bayDesignPattern = new[] { facadeDesign.simpleBay };
numberOfBayDesigns = 1;
}
//start with first window width - we'll be adding to this until we have filled the facade width
int it = 100;
while (true)
{
int patternModIndex = numberOfBays % numberOfBayDesigns;
float patternAddition = bayDesignPattern[patternModIndex].openingWidth + bayDesignPattern[patternModIndex].minimumBayWidth;
if (patternSize + patternAddition < facadeWidth)
{
patternSize += patternAddition;
numberOfBays++;
}
else
{
break;
}
it--;
if (it < 0)
{
break;
}
}
Vector3 windowBase = facadeFloorBaseVector;
facadeUV.x = 0;
facadeUV.y += floorHeight;
float perBayAdditionalSpacing = (facadeWidth - patternSize) / numberOfBays;
for (int c = 0; c < numberOfBays; c++)
{
BuildrBay bayStyle;
BuildrBay lastBay;
BuildrBay nextBay;
bool firstColumn = c == 0;
bool lastColumn = c == numberOfBays - 1;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
int numberOfBayStyles = facadeDesign.bayPattern.Count;
bayStyle = bayDesignPattern[c % numberOfBayStyles];
int lastBayIndex = (c > 0) ? (c - 1) % numberOfBayStyles : 0;
lastBay = bayDesignPattern[lastBayIndex];
nextBay = bayDesignPattern[(c + 1) % numberOfBayStyles];
}
else
{
bayStyle = facadeDesign.simpleBay;
lastBay = facadeDesign.simpleBay;
nextBay = facadeDesign.simpleBay;
}
float actualWindowSpacing = bayStyle.minimumBayWidth + perBayAdditionalSpacing;
float leftWidth = actualWindowSpacing * bayStyle.openingWidthRatio;
float rightWidth = actualWindowSpacing - leftWidth;
float openingWidth = bayStyle.openingWidth;
if (firstColumn)
{
leftWidth += largestDepthValue;
}
if (lastColumn)
{
rightWidth += largestDepthValue;
}
BuildrTexture columnTexture = textures[bayStyle.GetTexture(BuildrBay.TextureNames.ColumnTexture)];
Vector2 columnuvunits = columnTexture.tileUnitUV;
float openingHeight = bayStyle.openingHeight;
if (columnTexture.patterned)
{
openingHeight = Mathf.Ceil(bayStyle.openingHeight / columnuvunits.y) * columnuvunits.y;
}
if (bayStyle.openingHeight == floorHeight)
{
bayStyle.openingHeight = floorHeight;
}
float rowBottomHeight = ((floorHeight - openingHeight) * bayStyle.openingHeightRatio);
if (columnTexture.patterned)
{
rowBottomHeight = Mathf.Ceil(rowBottomHeight / columnuvunits.y) * columnuvunits.y;
}
float rowTopHeight = (floorHeight - rowBottomHeight - openingHeight);
bool previousBayIdentical = bayStyle == lastBay;
bool nextBayIdentical = bayStyle == nextBay;
if (previousBayIdentical && !firstColumn)
{
leftWidth = actualWindowSpacing;//if next design is identical - add the two parts together the reduce polycount
}
Vector3 w0, w1, w2, w3;
int wallSubmesh = volume.WallTexture(r);
bool wallFlipped = false;
if (!bayStyle.isOpening)
{
float bayWidthSize = openingWidth + actualWindowSpacing;
if (firstColumn || lastColumn)
{
bayWidthSize += largestDepthValue;
}
Vector3 bayWidth = facadeDirection * bayWidthSize;
Vector3 bayHeight = Vector3.up * floorHeight;
Vector3 bayDepth = facadeCross * largestDepthValue;
w0 = windowBase + bayDepth;
w1 = windowBase + bayWidth + bayDepth;
w2 = windowBase + bayHeight + bayDepth;
w3 = windowBase + bayWidth + bayHeight + bayDepth;
Vector2 bayOpeningUVEnd = facadeUV + new Vector2(openingWidth + actualWindowSpacing, floorHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, facadeUV, bayOpeningUVEnd);
windowBase = windowBase + bayWidth; //move base vertor to next bay
facadeUV.x += openingWidth + actualWindowSpacing;
continue; //bay filled - move onto next bay
}
var verts = new Vector3[16];
verts[0] = windowBase;
verts[1] = verts[0] + leftWidth * facadeDirection;
verts[2] = verts[1] + openingWidth * facadeDirection;
verts[3] = verts[2] + rightWidth * facadeDirection;
windowBase = (nextBayIdentical) ? verts[2] : verts[3];//move to next window - if next design is identical - well add the two parts together the reduce polycount
facadeUV.x += (nextBayIdentical) ? openingWidth : openingWidth + rightWidth;
Vector3 rowBottomVector = Vector3.up * rowBottomHeight;
verts[4] = verts[0] + rowBottomVector;
verts[5] = verts[1] + rowBottomVector;
verts[6] = verts[2] + rowBottomVector;
verts[7] = verts[3] + rowBottomVector;
Vector3 openingVector = Vector3.up * openingHeight;
verts[8] = verts[4] + openingVector;
verts[9] = verts[5] + openingVector;
verts[10] = verts[6] + openingVector;
verts[11] = verts[7] + openingVector;
Vector3 rowTopVector = Vector3.up * rowTopHeight;
verts[12] = verts[8] + rowTopVector;
verts[13] = verts[9] + rowTopVector;
verts[14] = verts[10] + rowTopVector;
verts[15] = verts[11] + rowTopVector;
//Realign facade end points
if (firstColumn)
{
verts[0] = p0interior - facadeCross * largestDepthValue + currentFloorHeightVector;
verts[4] = verts[0] + rowBottomVector;
verts[8] = verts[4] + openingVector;
verts[12] = verts[8] + rowTopVector;
}
if (lastColumn)
{
verts[3] = p1interior - facadeCross * largestDepthValue + currentFloorHeightVector;
verts[7] = verts[3] + rowBottomVector;
verts[11] = verts[7] + openingVector;
verts[15] = verts[11] + rowTopVector;
}
Vector3 openingDepthVector = facadeCross * bayStyle.openingDepth;
Vector3 wallDepthVecotr = facadeCross * largestDepthValue;
///WINDOWS
int windowSubmesh = bayStyle.GetTexture(BuildrBay.TextureNames.OpeningBackTexture);
bool windowFlipped = bayStyle.IsFlipped(BuildrBay.TextureNames.OpeningBackTexture);
w0 = verts[10] + openingDepthVector;
w1 = verts[9] + openingDepthVector;
w2 = verts[6] + openingDepthVector;
w3 = verts[5] + openingDepthVector;
Vector2 windowUVStart = new Vector2(0, 0);
Vector2 windowUVEnd = new Vector2(openingWidth, openingHeight);
if (bayStyle.renderBack && !data.cullBays)
{
AddPlane(w0, w1, w2, w3, windowSubmesh, windowFlipped, windowUVStart, windowUVEnd);
}
///COLUMNS
//Column Face
if (leftWidth > 0)//Column Face Left
{
w0 = verts[4] + wallDepthVecotr;
w1 = verts[5] + wallDepthVecotr;
w2 = verts[8] + wallDepthVecotr;
w3 = verts[9] + wallDepthVecotr;
Vector2 leftColumnUVStart = facadeUV + new Vector2(0, rowBottomHeight);
Vector2 leftColumnUVEnd = leftColumnUVStart + new Vector2(leftWidth, openingHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, leftColumnUVStart, leftColumnUVEnd);
}
if ((!nextBayIdentical || lastColumn) && rightWidth > 0)//Column Right
{
w0 = verts[6] + wallDepthVecotr;
w1 = verts[7] + wallDepthVecotr;
w2 = verts[10] + wallDepthVecotr;
w3 = verts[11] + wallDepthVecotr;
Vector2 rightColumnUVStart = facadeUV + new Vector2(leftWidth + openingWidth, rowBottomHeight);
Vector2 rightColumnUVEnd = rightColumnUVStart + new Vector2(rightWidth, openingHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, rightColumnUVStart, rightColumnUVEnd);
}
///ROWS
//Row Bottom
if (rowBottomHeight > 0)
{
w0 = verts[1] + wallDepthVecotr;
w1 = verts[2] + wallDepthVecotr;
w2 = verts[5] + wallDepthVecotr;
w3 = verts[6] + wallDepthVecotr;
Vector2 bottomRowUVStart = facadeUV + new Vector2(leftWidth, 0);
Vector2 bottomRowUVEnd = bottomRowUVStart + new Vector2(openingWidth, rowBottomHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, bottomRowUVStart, bottomRowUVEnd);
}
//Row Top
if (rowTopHeight > 0)
{
w0 = verts[9] + wallDepthVecotr;
w1 = verts[10] + wallDepthVecotr;
w2 = verts[13] + wallDepthVecotr;
w3 = verts[14] + wallDepthVecotr;
Vector2 topRowUVStart = facadeUV + new Vector2(leftWidth, rowBottomHeight + openingHeight);
Vector2 topRowUVEnd = topRowUVStart + new Vector2(openingWidth, rowTopHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, topRowUVStart, topRowUVEnd);
}
//Cross Left Bottom
w0 = verts[0] + wallDepthVecotr;
w1 = verts[1] + wallDepthVecotr;
w2 = verts[4] + wallDepthVecotr;
w3 = verts[5] + wallDepthVecotr;
Vector2 crossLBUVStart = facadeUV + new Vector2(0, 0);
Vector2 crossLBUVEnd = crossLBUVStart + new Vector2(leftWidth, rowBottomHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, crossLBUVStart, crossLBUVEnd);
//Cross Left Top
w0 = verts[8] + wallDepthVecotr;
w1 = verts[9] + wallDepthVecotr;
w2 = verts[12] + wallDepthVecotr;
w3 = verts[13] + wallDepthVecotr;
Vector2 crossLTUVStart = facadeUV + new Vector2(0, rowBottomHeight + openingHeight);
Vector2 crossLTUVEnd = crossLTUVStart + new Vector2(leftWidth, rowTopHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, crossLTUVStart, crossLTUVEnd);
if ((!nextBayIdentical || lastColumn) && rightWidth > 0)
{
//Cross Right Bottom
w0 = verts[2] + wallDepthVecotr;
w1 = verts[3] + wallDepthVecotr;
w2 = verts[6] + wallDepthVecotr;
w3 = verts[7] + wallDepthVecotr;
Vector2 crossRBUVStart = facadeUV + new Vector2(leftWidth + openingWidth, 0);
Vector2 crossRBUVEnd = crossRBUVStart + new Vector2(rightWidth, rowBottomHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, crossRBUVStart, crossRBUVEnd);
//Cross Right Top
w0 = verts[10] + wallDepthVecotr;
w1 = verts[11] + wallDepthVecotr;
w2 = verts[14] + wallDepthVecotr;
w3 = verts[15] + wallDepthVecotr;
Vector2 crossRTUVStart = facadeUV + new Vector2(leftWidth + openingWidth, rowBottomHeight + openingHeight);
Vector2 crossRTUVEnd = crossRTUVStart + new Vector2(rightWidth, rowTopHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, wallFlipped, crossRTUVStart, crossRTUVEnd);
}
}
}
else
{
// windowless wall
Vector3 interiorStart = p0interior + currentFloorHeightVector;
Vector3 interiorEnd = p1interior + currentFloorHeightVector;
// Vector3 wallVector = (facadeDirection * facadeWidth);
Vector3 wallHeightVector = Vector3.up * floorHeight;
Vector3 w0 = interiorStart;
Vector3 w1 = interiorEnd;
Vector3 w2 = interiorStart + wallHeightVector;
Vector3 w3 = interiorEnd + wallHeightVector;
BuildrTexture texture = textures[facadeDesign.simpleBay.GetTexture(BuildrBay.TextureNames.WallTexture)];
var uvSize = new Vector2(facadeWidth * (1.0f / texture.textureUnitSize.x), floorHeight * (1.0f / texture.textureUnitSize.y));
Vector2 uvunits = texture.tileUnitUV;
uvSize.x = Mathf.Ceil(uvSize.x / uvunits.x) * uvunits.x;
uvSize.y = Mathf.Ceil(uvSize.y / uvunits.y) * uvunits.y;
int wallSubmesh = 0;
bool flipped = false;
Vector2 wallUVStart = facadeUV;
Vector2 wallUVEnd = facadeUV + new Vector2(facadeWidth, floorHeight);
AddPlane(w0, w1, w2, w3, wallSubmesh, flipped, wallUVStart, wallUVEnd);
}
}
}
///FLOORS AND CEILING
int numberOfBasements = volume.numberOfBasementFloors;
int numberOfFloorPoints = interiorVolumePoints.Length;
int[] baseFloorPlanTriangles = EarClipper.Triangulate(interiorVolumePoints);
int baseFloorVectors = interiorVolumePoints.Length;
var newEndVerts = new Vector3[baseFloorVectors];
Vector3 basementBaseDrop = -floorHeightVector * numberOfBasements;
for (int i = 0; i < baseFloorVectors; i++)
{
newEndVerts[i] = interiorVolumePoints[i].vector3 + basementBaseDrop;
}
var tris = new List <int>(baseFloorPlanTriangles);
//Bottom Floor
int floorSubmesh = volume.FloorTexture(-numberOfBasements);
AddData(newEndVerts, baseFloorPlanTriangles, floorSubmesh, false);
//Top Ceiling
if (true)//Todo: add conditional for roof opening
{
Vector3 ceilingHeightVector = floorHeightVector * (numberOfFloors - 1 + numberOfBasements) + Vector3.up * ceilingHeight;
for (int i = 0; i < baseFloorVectors; i++)
{
newEndVerts[i] += ceilingHeightVector;
}
tris.Reverse();
AddData(newEndVerts, tris.ToArray(), volume.CeilingTexture(numberOfFloors - 1), false);
}
//inner floors
int[] floorPlanTriangles = EarClipper.Triangulate(interiorPointListCore);
int numberOfFloorVectors = interiorPointListCore.Length;
for (int floorIndex = -numberOfBasements; floorIndex < numberOfFloors; floorIndex++)
{
Vector3 floorVectorHeight = floorHeightVector * floorIndex;
newEndVerts = new Vector3[numberOfFloorVectors];
for (int i = 0; i < numberOfFloorVectors; i++)
{
newEndVerts[i] = interiorPointListCore[i].vector3 + floorVectorHeight;
}
tris = new List <int>(floorPlanTriangles);
//Floor
if (floorIndex > -numberOfBasements)
{
AddData(newEndVerts, tris.ToArray(), volume.FloorTexture(floorIndex), false);
}
//Ceiling
if (floorIndex < numberOfFloors - 1)
{
Vector3 ceilingHeightVector = Vector3.up * ceilingHeight;
for (int i = 0; i < numberOfFloorVectors; i++)
{
newEndVerts[i] += ceilingHeightVector;
}
tris.Reverse();
AddData(newEndVerts, tris.ToArray(), volume.CeilingTexture(floorIndex), false);
}
//basement walls
if (floorIndex < 0)
{
for (int f = 0; f < numberOfFloorPoints; f++)
{
Vector3 basementVector = floorHeightVector * floorIndex;
int indexA = f;
int indexB = (f + 1) % numberOfFloorPoints;
Vector3 p0 = interiorVolumePoints[indexA].vector3 + basementVector;
Vector3 p1 = interiorVolumePoints[indexB].vector3 + basementVector;
Vector3 p2 = p0 + floorHeightVector;
Vector3 p3 = p1 + floorHeightVector;
Vector2 uv1 = new Vector2(Vector3.Distance(p0, p1), floorHeight);
AddPlane(p0, p1, p2, p3, volume.WallTexture(floorIndex), false, Vector2.zero, uv1);
}
}
}
//Core walls
for (int c = 0; c < numberOfVolumeCores; c++)
{
Rect coreBounds = volumeCores[c];
Vector3 coreBL = new Vector3(coreBounds.xMin, 0, coreBounds.yMin);
Vector3 coreBR = new Vector3(coreBounds.xMax, 0, coreBounds.yMin);
Vector3 coreTL = new Vector3(coreBounds.xMin, 0, coreBounds.yMax);
Vector3 coreTR = new Vector3(coreBounds.xMax, 0, coreBounds.yMax);
for (int floorIndex = -numberOfBasements; floorIndex < numberOfFloors - 1; floorIndex++)
{
Vector3 c0 = floorHeightVector * floorIndex + Vector3.up * ceilingHeight;
Vector3 f0 = floorHeightVector * floorIndex + Vector3.up * floorHeight;
float gapHeight = floorHeight - ceilingHeight;
AddPlane(coreBL + c0, coreBR + c0, coreBL + f0, coreBR + f0, 0, false, Vector2.zero, new Vector2(coreBounds.width, gapHeight));
AddPlane(coreBR + c0, coreTR + c0, coreBR + f0, coreTR + f0, 0, false, Vector2.zero, new Vector2(coreBounds.width, gapHeight));
AddPlane(coreTR + c0, coreTL + c0, coreTR + f0, coreTL + f0, 0, false, Vector2.zero, new Vector2(coreBounds.width, gapHeight));
AddPlane(coreTL + c0, coreBL + c0, coreTL + f0, coreBL + f0, 0, false, Vector2.zero, new Vector2(coreBounds.width, gapHeight));
}
}
}
public static void Build(DynamicMeshGenericMultiMaterialMesh _mesh, BuildrData _data)
{
data = _data;
mesh = _mesh;
BuildrPlan plan = data.plan;
int facadeIndex = 0;
int numberOfVolumes = data.plan.numberOfVolumes;
for (int s = 0; s < numberOfVolumes; s++)
{
BuildrVolume volume = plan.volumes[s];
int numberOfVolumePoints = volume.points.Count;
Vector3[] newEndVerts = new Vector3[numberOfVolumePoints];
Vector2[] newEndUVs = new Vector2[numberOfVolumePoints];
Vector3 volumeHeight = Vector3.up * (volume.numberOfFloors * data.floorHeight);
for (int i = 0; i < numberOfVolumePoints; i++)
{
newEndVerts[i] = plan.points[volume.points[i]].vector3 + volumeHeight;
newEndUVs[i] = Vector2.zero;
}
List <int> tris = new List <int>(data.plan.GetTrianglesBySectorBase(s));
mesh.AddData(newEndVerts, newEndUVs, tris.ToArray(), 0);
}
//Build ROOF
//Build facades
for (int v = 0; v < numberOfVolumes; v++)
{
BuildrVolume volume = plan.volumes[v];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexA = f;
int indexB = (f < numberOfVolumePoints - 1) ? f + 1 : 0;
Vector3 p0 = plan.points[volume.points[indexA]].vector3;
Vector3 p1 = plan.points[volume.points[indexB]].vector3;
int floorBase = plan.GetFacadeFloorHeight(v, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)
{
//no facade - adjacent facade is taller and covers this one
continue;
}
float floorHeight = data.floorHeight;
Vector3 floorHeightStart = Vector3.up * (floorBase * floorHeight);
Vector3 wallHeight = Vector3.up * (volume.numberOfFloors * floorHeight) - floorHeightStart;
float facadeWidth = Vector3.Distance(p0, p1);
p0 += floorHeightStart;
p1 += floorHeightStart;
Vector3 w0 = p0;
Vector3 w1 = p1;
Vector3 w2 = w0 + wallHeight;
Vector3 w3 = w1 + wallHeight;
Vector2 uvMin = new Vector2(0, 0);
Vector2 uvMax = new Vector2(facadeWidth, floorHeight);
mesh.AddPlane(w0, w1, w2, w3, uvMin, uvMax, 0);
facadeIndex++;
}
}
data = null;
mesh = null;
}
private static void Parapet(BuildrVolume volume, BuildrRoofDesign design)
{
BuildrPlan area = data.plan;
int volumeIndex = area.volumes.IndexOf(volume);
int numberOfVolumePoints = volume.points.Count;
int numberOfFloors = volume.numberOfFloors;
float floorHeight = data.floorHeight;
Vector3 volumeFloorHeight = Vector3.up * (numberOfFloors * floorHeight);
for (int l = 0; l < numberOfVolumePoints; l++)
{
int indexA, indexB, indexA0, indexB0;
Vector3 p0, p1, p00, p10;
indexA = l;
indexB = (l < numberOfVolumePoints - 1) ? l + 1 : 0;
indexA0 = (l > 0) ? l - 1 : numberOfVolumePoints - 1;
indexB0 = (l < numberOfVolumePoints - 2) ? l + 2 : l + 2 - numberOfVolumePoints;
int adjacentFloorHeight = area.GetFacadeFloorHeight(volumeIndex, volume.points[indexA], volume.points[indexB]);
bool leftParapet = area.GetFacadeFloorHeight(volumeIndex, volume.points[indexA0], volume.points[indexA]) < numberOfFloors;
bool rightParapet = area.GetFacadeFloorHeight(volumeIndex, volume.points[indexB], volume.points[indexB0]) < numberOfFloors;
if (adjacentFloorHeight >= numberOfFloors)
continue;//do not draw a roof edge
p0 = area.points[volume.points[indexA]].vector3;
p1 = area.points[volume.points[indexB]].vector3;
p00 = area.points[volume.points[indexA0]].vector3;
p10 = area.points[volume.points[indexB0]].vector3;
float facadeWidth = Vector3.Distance(p0, p1);
Vector3 facadeDirection = (p1 - p0).normalized;
Vector3 facadeDirectionLeft = (p0 - p00).normalized;
Vector3 facadeDirectionRight = (p10 - p1).normalized;
Vector3 facadeNormal = Vector3.Cross(facadeDirection, Vector3.up);
Vector3 facadeNormalLeft = Vector3.Cross(facadeDirectionLeft, Vector3.up);
Vector3 facadeNormalRight = Vector3.Cross(facadeDirectionRight, Vector3.up);
float parapetHeight = design.parapetHeight;
float parapetFrontDepth = design.parapetFrontDepth;
float parapetBackDepth = design.parapetBackDepth;
Vector3 w0, w1, w2, w3, w4, w5, w6, w7;
Vector3 pr = facadeDirection * facadeWidth;
Vector3 pu = Vector3.up * parapetHeight;
Vector3 pbdl, pbdr, pfdl, pfdr;
if (leftParapet)
{
pbdl = -(facadeNormal + facadeNormalLeft).normalized * parapetFrontDepth;
pfdl = (facadeNormal + facadeNormalLeft).normalized * parapetBackDepth;
}
else
{
pbdl = facadeDirectionLeft * parapetFrontDepth;
pfdl = -facadeDirectionLeft * parapetBackDepth;
}
if (rightParapet)
{
pbdr = -(facadeNormal + facadeNormalRight).normalized * parapetFrontDepth;
pfdr = (facadeNormal + facadeNormalRight).normalized * parapetBackDepth;
}
else
{
pbdr = -facadeDirectionRight * parapetFrontDepth;
pfdr = facadeDirectionRight * parapetBackDepth;
}
p0 += volumeFloorHeight;
p1 += volumeFloorHeight;
w2 = p0 + pbdl;//front left
w3 = p0 + pr + pbdr;//front right
w0 = p0 + pfdl;//back left
w1 = p0 + pr + pfdr;//back right
w6 = p0 + pbdl + pu;//front left top
w7 = p0 + pr + pbdr + pu;//front right top
w4 = p0 + pfdl + pu;//back left top
w5 = p0 + pr + pfdr + pu;//back right top
int subMesh = design.GetTexture(BuildrRoofDesign.textureNames.parapet);
bool flipped = design.IsFlipped(BuildrRoofDesign.textureNames.parapet);
AddPlane(design, w1, w0, w5, w4, subMesh, flipped);//front
AddPlaneComplex(design, w6, w7, w4, w5, subMesh, flipped, facadeNormal);//top
AddPlane(design, w2, w3, w6, w7, subMesh, flipped);//back
if (parapetFrontDepth > 0)
AddPlaneComplex(design, w3, w2, w1, w0, subMesh, flipped, facadeNormal);//bottom
if (!leftParapet)
AddPlane(design, w0, w2, w4, w6, subMesh, flipped);//left cap
if (!rightParapet)
AddPlane(design, w3, w1, w7, w5, subMesh, flipped);//left cap
}
}
public static GameObject[] Place(BuildrData data)
{
BuildrPlan plan = data.plan;
int numberOfVolumes = plan.numberOfVolumes;
BuildrTexture[] textures = data.textures.ToArray();
List <GameObject> output = new List <GameObject>();
float largestDepthValue = 0;//deepest value of a bay design in the building
foreach (BuildrBay bay in data.bays)
{
largestDepthValue = Mathf.Max(largestDepthValue, bay.deepestValue);//get the deepest value
}
foreach (BuildrFacadeDesign facade in data.facades)
{
largestDepthValue = Mathf.Max(largestDepthValue, facade.simpleBay.deepestValue);//get the deepest value
}
for (int v = 0; v < numberOfVolumes; v++)
{
BuildrVolume volume = plan.volumes[v];
int numberOfVolumePoints = volume.points.Count;
for (int f = 0; f < numberOfVolumePoints; f++)
{
if (!volume.renderFacade[f])
{
continue;
}
int indexAM = Mathf.Abs((f - 1) % numberOfVolumePoints);
int indexA = f;
int indexB = (f + 1) % numberOfVolumePoints;
int indexBP = (f + 2) % numberOfVolumePoints;
Vector3 p0m = plan.points[volume.points[indexAM]].vector3;
Vector3 p0 = plan.points[volume.points[indexA]].vector3;
Vector3 p1 = plan.points[volume.points[indexB]].vector3;
Vector3 p1p = plan.points[volume.points[indexBP]].vector3;
float facadeWidth = Vector3.Distance(p0, p1) - largestDepthValue * 2.0f;
Vector3 facadeDirection = (p1 - p0).normalized;
Vector3 facadeCross = Vector3.Cross(facadeDirection, Vector3.up).normalized;
Vector3 lastFacadeDirection = (p0 - p0m).normalized;
Vector3 nextFacadeDirection = (p1p - p1).normalized;
//only bother with facade directions when facade may intersect inverted geometry
float facadeDirDotL = Vector3.Dot(-facadeDirection, lastFacadeDirection);
float facadeCrossDotL = Vector3.Dot(-facadeCross, lastFacadeDirection);
if (facadeDirDotL <= 0 || facadeCrossDotL <= 0)
{
lastFacadeDirection = -facadeCross;
}
float facadeDirDotN = Vector3.Dot(-facadeDirection, nextFacadeDirection);
float facadeCrossDotN = Vector3.Dot(-facadeCross, nextFacadeDirection);
if (facadeDirDotN <= 0 || facadeCrossDotN <= 0)
{
nextFacadeDirection = facadeCross;
}
int floorBase = plan.GetFacadeFloorHeight(v, volume.points[indexA], volume.points[indexB]);
int numberOfFloors = volume.numberOfFloors - floorBase;
if (numberOfFloors < 1)
{
//no facade - adjacent facade is taller and covers this one
continue;
}
float floorHeight = data.floorHeight;
Vector3 floorHeightStart = Vector3.up * (floorBase * floorHeight);
p0 += floorHeightStart;
BuildrVolumeStylesUnit[] styleUnits = volume.styles.GetContentsByFacade(volume.points[indexA]);
int floorPatternSize = 0;
List <int> facadePatternReference = new List <int>(); //this contains a list of all the facade style indices to refence when looking for the appropriate style per floor
int patternCount = 0;
foreach (BuildrVolumeStylesUnit styleUnit in styleUnits) //need to knw how big all the styles are together so we can loop through them
{
floorPatternSize += styleUnit.floors;
for (int i = 0; i < styleUnit.floors; i++)
{
facadePatternReference.Add(patternCount);
}
patternCount++;
}
facadePatternReference.Reverse();
int rows = numberOfFloors;
for (int r = 0; r < rows; r++)
{
//Get the facade style id
//need to loop through the facade designs floor by floor until we get to the right one
float currentHeight = floorHeight * r;
Vector3 facadeFloorBaseVector = p0 + Vector3.up * currentHeight;
int modFloor = (r % floorPatternSize);
BuildrFacadeDesign facadeDesign = data.facades[styleUnits[facadePatternReference[modFloor]].styleID];
bool isBlankWall = !facadeDesign.hasWindows;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
if (data.bays.Count == 0 || facadeDesign.bayPattern.Count == 0)
{
data.illegal = true;
return(output.ToArray());
}
BuildrBay firstBay = data.bays[facadeDesign.bayPattern[0]];
if (firstBay.openingWidth > facadeWidth)
{
isBlankWall = true;
}
if (facadeDesign.bayPattern.Count == 0)
{
isBlankWall = true;
}
}
else
{
if (facadeDesign.simpleBay.openingWidth + facadeDesign.simpleBay.minimumBayWidth > facadeWidth)
{
isBlankWall = true;
}
}
if (!isBlankWall)
{
float patternSize = 0;//the space the pattern fills, there will be a gap that will be distributed to all bay styles
int numberOfBays = 0;
//float actualWindowSpacing;
BuildrBay[] bayDesignPattern;
int numberOfBayDesigns;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
numberOfBayDesigns = facadeDesign.bayPattern.Count;
bayDesignPattern = new BuildrBay[numberOfBayDesigns];
for (int i = 0; i < numberOfBayDesigns; i++)
{
bayDesignPattern[i] = data.bays[facadeDesign.bayPattern[i]];
}
}
else
{
bayDesignPattern = new[] { facadeDesign.simpleBay };
numberOfBayDesigns = 1;
}
//start with first window width - we'll be adding to this until we have filled the facade width
int it = 100;
while (true)
{
int patternModIndex = numberOfBays % numberOfBayDesigns;
float patternAddition = bayDesignPattern[patternModIndex].openingWidth + bayDesignPattern[patternModIndex].minimumBayWidth;
if (patternSize + patternAddition < facadeWidth)
{
patternSize += patternAddition;
numberOfBays++;
}
else
{
break;
}
it--;
if (it < 0)
{
break;
}
}
Vector3 windowBase = facadeFloorBaseVector;
float perBayAdditionalSpacing = (facadeWidth - patternSize) / numberOfBays;
for (int c = 0; c < numberOfBays; c++)
{
BuildrBay bayStyle;
if (facadeDesign.type == BuildrFacadeDesign.types.patterned)
{
int numberOfBayStyles = facadeDesign.bayPattern.Count;
bayStyle = bayDesignPattern[c % numberOfBayStyles];
}
else
{
bayStyle = facadeDesign.simpleBay;
}
GameObject bayModel = bayStyle.bayModel;
BuildrTexture columnTexture = textures[bayStyle.GetTexture(BuildrBay.TextureNames.ColumnTexture)];
Vector2 columnuvunits = columnTexture.tileUnitUV;
float openingWidth = bayStyle.openingWidth;
float openingHeight = bayStyle.openingHeight;
if (columnTexture.patterned)
{
openingHeight = Mathf.Ceil(bayStyle.openingHeight / columnuvunits.y) * columnuvunits.y;
}
if (bayStyle.openingHeight == floorHeight)
{
bayStyle.openingHeight = floorHeight;
}
float actualWindowSpacing = bayStyle.minimumBayWidth + perBayAdditionalSpacing;
float leftWidth = actualWindowSpacing * bayStyle.openingWidthRatio;
bool firstColumn = c == 0;
if (firstColumn)
{
leftWidth += largestDepthValue;
}
float rowBottomHeight = ((floorHeight - openingHeight) * bayStyle.openingHeightRatio);
if (columnTexture.patterned)
{
rowBottomHeight = Mathf.Ceil(rowBottomHeight / columnuvunits.y) * columnuvunits.y;
}
float bayWidthSize = openingWidth + actualWindowSpacing;
Vector3 bayWidth = facadeDirection * bayWidthSize;
if (!bayStyle.isOpening || bayModel == null)
{
windowBase += bayWidth;//move base vertor to next bay
if (firstColumn)
{
windowBase += facadeDirection * (largestDepthValue);
}
continue;//bay filled - move onto next bay
}
GameObject newInstance = (GameObject)Instantiate(bayModel);
MeshRenderer[] rends = newInstance.GetComponentsInChildren <MeshRenderer>();
Bounds modelBounds = rends[0].bounds;
foreach (MeshRenderer meshRenderer in rends)
{
modelBounds.Encapsulate(meshRenderer.bounds);
}
if (rends.Length == 0)
{
continue;
}
Vector3 modelSize = modelBounds.size;
Vector3 baySize = new Vector3(openingWidth, openingHeight, modelSize.z);
Vector3 modelScale;
modelScale.x = baySize.x / modelSize.x;
modelScale.y = baySize.y / modelSize.y;
modelScale.z = baySize.z / modelSize.z;
newInstance.transform.localScale = modelScale;
Vector3 upVector = Vector3.up * rowBottomHeight;
Vector3 leftVector = leftWidth * facadeDirection;
Vector3 modelPosition = windowBase + leftVector + upVector;
modelBounds = rends[0].bounds;
foreach (MeshRenderer meshRenderer in rends)
{
modelBounds.Encapsulate(meshRenderer.bounds);
}
modelPosition += Quaternion.LookRotation(facadeCross) * (-modelBounds.min);
newInstance.transform.position = modelPosition;
newInstance.transform.rotation = Quaternion.LookRotation(-facadeCross);
output.Add(newInstance);
windowBase += bayWidth;//move base vertor to next bay
if (firstColumn)
{
windowBase += facadeDirection * (largestDepthValue);
}
}
}
}
}
}
return(output.ToArray());
}
