void ResetTrip(IPeripheral selectedPeripheral)
{
Device.BeginInvokeOnMainThread(async() =>
{
pies = await App.Current.MainPage.DisplayAlert("Reset Trip", "Are you sure you would like to reset your trip?", "Ok", "Cancel");
if (pies == true)
{
Endd = true;
Thread.SpinWait(200);
TextToSend = "MR";
Thread.SpinWait(200);
_savedCharacteristic?.Write(Encoding.UTF8.GetBytes($"{TextToSend}")).Subscribe(
result =>
{
Thread.SpinWait(200);
//ShowMessage("Yay", Encoding.UTF8.GetString(Encoding.UTF8.GetBytes($"{TextToSend}"), 0, Encoding.UTF8.GetBytes($"{TextToSend}").Length));
},
exception =>
{
//ShowMessage("Error", Encoding.UTF8.GetString(Encoding.UTF8.GetBytes($"{TextToPrint}"), 0, Encoding.UTF8.GetBytes($"{TextToPrint}").Length));
});
conn();
Thread.SpinWait(600);
}
});
}
void ConnectPrinter(IPeripheral selectedPeripheral)
{
if (!selectedPeripheral.IsConnected())
{
selectedPeripheral.Connect();
}
_perifDisposable = selectedPeripheral.WhenAnyCharacteristicDiscovered().Subscribe((characteristic) =>
{
System.Diagnostics.Debug.WriteLine(characteristic.Description);
if (characteristic.CanWrite() && characteristic.CanRead() && characteristic.CanNotify())
{
IsReadyToPrint = true;
_savedCharacteristic = characteristic;
conn();
TriggerSettings();
Thread.SpinWait(800);
flagg = "!!";
TextToPrint = "0";
PrintText();
Thread.SpinWait(300);
System.Diagnostics.Debug.WriteLine($"Writing {characteristic.Uuid} - {characteristic.CanRead()} - {characteristic.CanIndicate()} - {characteristic.CanNotify()}");
_perifDisposable.Dispose();
}
});
}
void DiscPrinter(IPeripheral selectedPeripheral)
{
Endd = true;
Thread.SpinWait(200);
//if (selectedPeripheral.IsConnected())
// selectedPeripheral.CancelConnection();
//flagD = true;
Application.Current.MainPage.Navigation.PopAsync();
}
void ResetTank(IPeripheral selectedPeripheral)
{
Device.BeginInvokeOnMainThread(async() =>
{
string action = await App.Current.MainPage.DisplayActionSheet("Full or Partial refuel?", "Cancel", null, "Full Tank", "Partial Refuel");
if (action == "Full Tank")
{
Endd = true;
Thread.SpinWait(200);
TextToSend = "MT";
Thread.SpinWait(200);
_savedCharacteristic?.Write(Encoding.UTF8.GetBytes($"{TextToSend}")).Subscribe(
result =>
{
Thread.SpinWait(200);
//ShowMessage("Yay", Encoding.UTF8.GetString(Encoding.UTF8.GetBytes($"{TextToSend}"), 0, Encoding.UTF8.GetBytes($"{TextToSend}").Length));
},
exception =>
{
//ShowMessage("Error", Encoding.UTF8.GetString(Encoding.UTF8.GetBytes($"{TextToPrint}"), 0, Encoding.UTF8.GetBytes($"{TextToPrint}").Length));
});
conn();
Thread.SpinWait(600);
}
if (action == "Partial Refuel")
{
Endd = true;
Thread.SpinWait(200);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Partial Refuel", "How much fuel have you added to the tank *1000? (20.69L = 20,690)", "Save", "Cancel", "10,000L", 8, keyboard: Keyboard.Numeric);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsPART();
Thread.SpinWait(650);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
conn();
Thread.SpinWait(600);
}
});
}
public InfoPageViewModel(IPeripheral peripheral)
{
SettingCommand1 = new Command(savesettingsQ);
SettingCommand2 = new Command(savesettingsR);
SettingCommand3 = new Command(savesettingsS);
SettingCommand4 = new Command(savesettingsT);
SettingCommand5 = new Command(savesettingsU);
SettingCommand6 = new Command(savesettingsV);
SettingCommand7 = new Command(savesettingsW);
SettingCommand8 = new Command(savesettingsX);
SettingCommand9 = new Command(savesettingsY);
SettingCommand10 = new Command(savesettingsZ);
SettingCommand = new Command <IPeripheral>(SettingsView);
TripCommand = new Command <IPeripheral>(ResetTrip);
TankCommand = new Command <IPeripheral>(ResetTank);
ConnectDeviceCommand = new Command <IPeripheral>(ConnectPrinter);
Disconnect = new Command <IPeripheral>(DiscPrinter);
ConnectDeviceCommand.Execute(peripheral);
}
void SettingsView(IPeripheral selectedPeripheral)
{
TriggerSettings();
Device.BeginInvokeOnMainThread(async() =>
{
string action = await App.Current.MainPage.DisplayActionSheet("Select a Setting to change", "Cancel", null, "VSS Pulses/KM", "Microsec/Litre", "Pulses/2Rev", "Imperial/Metric", "Tank Size", "Inj Delay", "VSS Delay", "Inj Type", "Volt Offset");
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
Thread.SpinWait(300);
if (action == "VSS Pulses/KM")
{
TriggerSettings();
string crap = Convert.ToString(SvssPulses);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("VSS Pulses/KM", "The amount of pulses recieved per KM", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsR();
Thread.SpinWait(650);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Microsec/Litre")
{
TriggerSettings();
string crap = Convert.ToString(SmicroSec);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Microsec/Litre", "How many Microseconds of injector time for 1 Litre", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsS();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Pulses/2Rev")
{
TriggerSettings();
string crap = Convert.ToString(SperRev);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Pulses/2Rev", "Inj pulses per 2 engine cycles, for RPM readout", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsT();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Imperial/Metric")
{
TriggerSettings();
string crap = Convert.ToString(STripReset);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Imperial/Metric", "1 for Imperial, 2 for Metric", "Save", "Cancel", crap, 1, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint == "1")
{
savesettingsU();
Thread.SpinWait(50);
}
if (TextToPrint == "2")
{
savesettingsU();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Tank Size")
{
TriggerSettings();
string crap = Convert.ToString(Stanksize);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Tank Size", "Tank size *1000 (50L = 50,000)", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsV();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Inj Delay")
{
TriggerSettings();
string crap = Convert.ToString(Sinjsettle);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Inj delay", "Micro second delay of Inj pulse signal for smothing", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsW();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "VSS Delay")
{
TriggerSettings();
string crap = Convert.ToString(Svsspause);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("VSS Delay", "For smothing VSS signal", "Save", "Cancel", crap, 8, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsX();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Inj Type")
{
TriggerSettings();
string crap = Convert.ToString(SinjEdge);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Injector Type", "0 Normal, 1 Inverse, 2 Peak and Hold", "Save", "Cancel", crap, 1, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint == "0")
{
savesettingsY();
Thread.SpinWait(50);
}
if (TextToPrint == "1")
{
savesettingsY();
Thread.SpinWait(50);
}
if (TextToPrint == "2")
{
savesettingsY();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
if (action == "Volt Offset")
{
TriggerSettings();
string crap = Convert.ToString(Svolt);
Device.BeginInvokeOnMainThread(async() =>
{
TextToPrint = await App.Current.MainPage.DisplayPromptAsync("Volt Offset", "Adjust this figure for Voltage accuracy", "Save", "Cancel", crap, 5, keyboard: Keyboard.Numeric, crap);
//CheckIfOK(TextToPrint);
if (TextToPrint != null)
{
savesettingsZ();
Thread.SpinWait(50);
}
conn();
flagg = "!!";
TextToPrint = "0";
PrintText();
});
}
});
}