/// <summary>
/// Creates a SimpleSweptSolidAnalyzer and computes the swept solid.
/// </summary>
/// <param name="faces">The faces of a solid.</param>
/// <param name="normal">The normal of the reference plane that a path might lie on. If it is null, try to guess based on the geometry.</param>
/// <returns>The analyzer.</returns>
/// <remarks>This is a simple analyzer, and is not intended to be general - it works in some simple, real-world cases.</remarks>
public static SimpleSweptSolidAnalyzer Create(ICollection <Face> faces, XYZ normal)
{
if (faces == null || faces.Count < 3)
{
throw new ArgumentException("Invalid faces.", "faces");
}
if (normal == null)
{
foreach (Face face in faces)
{
if (face is RevolvedFace)
{
XYZ faceNormal = (face as RevolvedFace).Axis;
if (normal == null)
{
normal = faceNormal;
}
else if (!MathUtil.VectorsAreParallel(normal, faceNormal))
{
throw new InvalidOperationException("Couldn't calculate swept solid normal.");
}
}
}
}
// find potential profile faces, their normal vectors must be orthogonal to the input normal
List <PlanarFace> potentialSweepEndFaces = new List <PlanarFace>();
foreach (Face face in faces)
{
PlanarFace planarFace = face as PlanarFace;
if (planarFace == null)
{
continue;
}
if (MathUtil.VectorsAreOrthogonal(normal, planarFace.FaceNormal))
{
potentialSweepEndFaces.Add(planarFace);
}
}
if (potentialSweepEndFaces.Count < 2)
{
// Can't find enough potential end faces.
return(null);
}
int ii = 0;
PlanarFace candidateProfileFace = null; // the potential profile face for the swept solid
PlanarFace candidateProfileFace2 = null;
Edge candidatePathEdge = null;
bool foundCandidateFace = false;
do
{
candidateProfileFace = potentialSweepEndFaces[ii++];
// find edges on the candidate profile face and the side faces with the edges
// later find edges on the other candidate profile face with same side faces
// they will be used to compare if the edges are congruent
// to make sure the two faces are the potential profile faces
Dictionary <Face, Edge> sideFacesWithCandidateEdges = new Dictionary <Face, Edge>();
EdgeArrayArray candidateFaceEdgeLoops = candidateProfileFace.EdgeLoops;
foreach (EdgeArray edgeArray in candidateFaceEdgeLoops)
{
foreach (Edge candidateEdge in edgeArray)
{
Face sideFace = candidateEdge.GetFace(0);
if (sideFace == candidateProfileFace)
{
sideFace = candidateEdge.GetFace(1);
}
if (sideFacesWithCandidateEdges.ContainsKey(sideFace)) // should not happen
{
throw new InvalidOperationException("Failed");
}
sideFacesWithCandidateEdges[sideFace] = candidateEdge;
}
}
double candidateProfileFaceArea = candidateProfileFace.Area;
foreach (PlanarFace theOtherCandidateFace in potentialSweepEndFaces)
{
if (theOtherCandidateFace.Equals(candidateProfileFace))
{
continue;
}
if (!MathUtil.IsAlmostEqual(candidateProfileFaceArea, theOtherCandidateFace.Area))
{
continue;
}
EdgeArrayArray theOtherCandidateFaceEdgeLoops = theOtherCandidateFace.EdgeLoops;
bool failToFindTheOtherCandidateFace = false;
Dictionary <Face, Edge> sideFacesWithTheOtherCandidateEdges = new Dictionary <Face, Edge>();
foreach (EdgeArray edgeArray in theOtherCandidateFaceEdgeLoops)
{
foreach (Edge theOtherCandidateEdge in edgeArray)
{
Face sideFace = theOtherCandidateEdge.GetFace(0);
if (sideFace == theOtherCandidateFace)
{
sideFace = theOtherCandidateEdge.GetFace(1);
}
if (!sideFacesWithCandidateEdges.ContainsKey(sideFace)) // should already have
{
failToFindTheOtherCandidateFace = true;
break;
}
if (sideFacesWithTheOtherCandidateEdges.ContainsKey(sideFace)) // should not happen
{
throw new InvalidOperationException("Failed");
}
sideFacesWithTheOtherCandidateEdges[sideFace] = theOtherCandidateEdge;
}
}
if (failToFindTheOtherCandidateFace)
{
continue;
}
if (sideFacesWithCandidateEdges.Count != sideFacesWithTheOtherCandidateEdges.Count)
{
continue;
}
// side faces with candidate profile face edges
Dictionary <Face, List <Edge> > sideFacesWithEdgesDic = new Dictionary <Face, List <Edge> >();
foreach (Face sideFace in sideFacesWithCandidateEdges.Keys)
{
sideFacesWithEdgesDic[sideFace] = new List <Edge>();
sideFacesWithEdgesDic[sideFace].Add(sideFacesWithCandidateEdges[sideFace]);
sideFacesWithEdgesDic[sideFace].Add(sideFacesWithTheOtherCandidateEdges[sideFace]);
}
if (!AreFacesSimpleCongruent(sideFacesWithEdgesDic))
{
continue;
}
// find candidate path edges
Dictionary <Face, List <Edge> > candidatePathEdgesWithFace = new Dictionary <Face, List <Edge> >();
foreach (KeyValuePair <Face, List <Edge> > sideFaceAndEdges in sideFacesWithEdgesDic)
{
List <Edge> pathEdges = FindCandidatePathEdge(sideFaceAndEdges.Key, sideFaceAndEdges.Value[0], sideFaceAndEdges.Value[1]);
// maybe we found two faces of an opening or a recess on the swept solid, skip in this case
if (pathEdges.Count < 2)
{
failToFindTheOtherCandidateFace = true;
break;
}
candidatePathEdgesWithFace[sideFaceAndEdges.Key] = pathEdges;
}
if (failToFindTheOtherCandidateFace)
{
continue;
}
// check if these edges are congruent
if (!AreEdgesSimpleCongruent(candidatePathEdgesWithFace))
{
continue;
}
candidatePathEdge = candidatePathEdgesWithFace.Values.ElementAt(0).ElementAt(0);
foundCandidateFace = true;
candidateProfileFace2 = theOtherCandidateFace;
break;
}
if (foundCandidateFace)
{
break;
}
} while (ii < potentialSweepEndFaces.Count);
SimpleSweptSolidAnalyzer simpleSweptSolidAnalyzer = null;
if (foundCandidateFace)
{
simpleSweptSolidAnalyzer = new SimpleSweptSolidAnalyzer();
Curve pathCurve = candidatePathEdge.AsCurve();
XYZ endPoint0 = pathCurve.GetEndPoint(0);
bool foundProfileFace = false;
List <PlanarFace> profileFaces = new List <PlanarFace>();
profileFaces.Add(candidateProfileFace);
profileFaces.Add(candidateProfileFace2);
foreach (PlanarFace profileFace in profileFaces)
{
IntersectionResultArray intersectionResults;
profileFace.Intersect(pathCurve, out intersectionResults);
if (intersectionResults != null)
{
foreach (IntersectionResult intersectionResult in intersectionResults)
{
XYZ intersectPoint = intersectionResult.XYZPoint;
if (intersectPoint.IsAlmostEqualTo(endPoint0))
{
simpleSweptSolidAnalyzer.m_ProfileFace = profileFace;
foundProfileFace = true;
break;
}
}
}
if (foundProfileFace)
{
break;
}
}
if (!foundProfileFace)
{
// Failed to find profile face.
return(null);
}
// TODO: consider one profile face has an opening extrusion inside while the other does not
List <Face> alignedFaces = FindAlignedFaces(profileFaces.ToList <Face>());
List <Face> unalignedFaces = new List <Face>();
foreach (Face face in faces)
{
if (profileFaces.Contains(face) || alignedFaces.Contains(face))
{
continue;
}
unalignedFaces.Add(face);
}
simpleSweptSolidAnalyzer.m_UnalignedFaces = unalignedFaces;
simpleSweptSolidAnalyzer.m_PathCurve = pathCurve;
simpleSweptSolidAnalyzer.m_ReferencePlaneNormal = normal;
}
return(simpleSweptSolidAnalyzer);
}
/// <summary>
/// Creates a SimpleSweptSolidAnalyzer and computes the swept solid. This method should be used when a swept curve (directrix) is already known. Even when it is missing (null)
/// it will simplu call the original one where it will try to determine the swept curve (directrix) using the connecting faces
/// </summary>
/// <param name="faces">The faces of a solid.</param>
/// <param name="normal">The normal of the reference plane that a path might lie on. If it is null, try to guess based on the geometry.</param>
/// <param name="potentialPathGeom">The potential swept path (e.g. in Revit MEP pipe/duct/fitting may already have this defined as part of the model)</param>
/// <returns>The analyzer.</returns>
/// <remarks>This is a simple analyzer, and is not intended to be general - it works in some simple, real-world cases.</remarks>
public static SimpleSweptSolidAnalyzer Create(ICollection <Face> faces, XYZ normal, GeometryObject potentialPathGeom)
{
SimpleSweptSolidAnalyzer simpleSweptSolidAnalyzer = null;
IList <Tuple <PlanarFace, XYZ> > potentialSweptAreaFaces = new List <Tuple <PlanarFace, XYZ> >();
Curve directrix = potentialPathGeom as Curve;
bool pathGeomExists = potentialPathGeom != null;
if (!pathGeomExists)
{
return(Create(faces, normal));
}
// Collect plannar faces as candidates for the swept area
foreach (Face face in faces)
{
if (!(face is PlanarFace))
{
continue;
}
PlanarFace planarFace = face as PlanarFace;
// Candidate face must be Orthogonal to the plane where the directrix curve is
if (MathUtil.VectorsAreOrthogonal(normal, planarFace.FaceNormal))
{
// We are also interested to get only end faces where the Curve intersect the Face at the same point as the Curve start or end point
IntersectionResultArray intersectResults;
if (planarFace.Intersect(directrix, out intersectResults) == SetComparisonResult.Overlap)
{
foreach (IntersectionResult res in intersectResults)
{
if (res.XYZPoint.IsAlmostEqualTo(directrix.GetEndPoint(0)) ||
res.XYZPoint.IsAlmostEqualTo(directrix.GetEndPoint(1)))
{
Tuple <PlanarFace, XYZ> potentialEndFaceAndPoint = new Tuple <PlanarFace, XYZ>(planarFace, res.XYZPoint);
potentialSweptAreaFaces.Add(potentialEndFaceAndPoint);
}
}
}
}
}
// If there are more than 1 candidates, we need to find the congruent faces, and they cannot be on the same plane
IList <Tuple <PlanarFace, XYZ> > sweptEndFaces = new List <Tuple <PlanarFace, XYZ> >();
while (potentialSweptAreaFaces.Count > 1)
{
bool foundPair = false;
PlanarFace face0 = potentialSweptAreaFaces[0].Item1;
XYZ ptDirectrix = potentialSweptAreaFaces[0].Item2;
potentialSweptAreaFaces.RemoveAt(0); // remove the item from the List
IList <Tuple <PlanarFace, XYZ> > potentialPairList = potentialSweptAreaFaces;
foreach (Tuple <PlanarFace, XYZ> potentialPair in potentialPairList)
{
PlanarFace face1 = potentialPair.Item1;
// Cannot handle faces that are on the same plane or intersecting (will cause self-intersection when being swept)
// -- Can't do the intersection way because Revit returns intersection of the planes where those faces are defines (unbound)
//if (face0.Intersect(face1) == FaceIntersectionFaceResult.Intersecting)
// continue;
// If the faces are facing the same direction (or opposite) they may be of the same plane. Skip those of the same plane
if (face0.FaceNormal.IsAlmostEqualTo(face1.FaceNormal) || face0.FaceNormal.IsAlmostEqualTo(face1.FaceNormal.Negate()))
{
// chose any point in face0 and face1
XYZ pF0TopF1 = (face0.EdgeLoops.get_Item(0).get_Item(0).AsCurve().GetEndPoint(0)
- face1.EdgeLoops.get_Item(0).get_Item(0).AsCurve().GetEndPoint(0)).Normalize();
if (pF0TopF1 == null || pF0TopF1.IsZeroLength())
{
continue;
}
// If the vector created from a point in Face0 and a point in Face1 against the face normal is orthogonal, it means the faces are on the same plane
if (MathUtil.VectorsAreOrthogonal(face0.FaceNormal, pF0TopF1))
{
continue;
}
}
if (AreFacesSimpleCongruent(face0, face1))
{
sweptEndFaces.Add(new Tuple <PlanarFace, XYZ>(face0, ptDirectrix));
sweptEndFaces.Add(new Tuple <PlanarFace, XYZ>(face1, potentialPair.Item2));
foundPair = true;
break;
}
}
if (foundPair)
{
break;
}
}
if (sweptEndFaces.Count >= 2)
{
simpleSweptSolidAnalyzer = new SimpleSweptSolidAnalyzer();
simpleSweptSolidAnalyzer.m_ProfileFace = sweptEndFaces[0].Item1;
simpleSweptSolidAnalyzer.m_PathCurve = directrix;
simpleSweptSolidAnalyzer.m_ReferencePlaneNormal = normal;
}
return(simpleSweptSolidAnalyzer);
}
/// <summary>
/// Creates a SimpleSweptSolidAnalyzer and computes the swept solid.
/// </summary>
/// <param name="faces">The faces of a solid.</param>
/// <param name="normal">The normal of the reference plane that a path might lie on. If it is null, try to guess based on the geometry.</param>
/// <returns>The analyzer.</returns>
/// <remarks>This is a simple analyzer, and is not intended to be general - it works in some simple, real-world cases.</remarks>
public static SimpleSweptSolidAnalyzer Create(ICollection<Face> faces, XYZ normal)
{
if (faces == null || faces.Count < 3)
throw new ArgumentException("Invalid faces.", "faces");
if (normal == null)
{
foreach (Face face in faces)
{
if (face is RevolvedFace)
{
XYZ faceNormal = (face as RevolvedFace).Axis;
if (normal == null)
normal = faceNormal;
else if (!MathUtil.VectorsAreParallel(normal, faceNormal))
throw new InvalidOperationException("Couldn't calculate swept solid normal.");
}
}
}
// find potential profile faces, their normal vectors must be orthogonal to the input normal
List<PlanarFace> potentialSweepEndFaces = new List<PlanarFace>();
foreach (Face face in faces)
{
PlanarFace planarFace = face as PlanarFace;
if (planarFace == null)
continue;
if (MathUtil.VectorsAreOrthogonal(normal, planarFace.Normal))
potentialSweepEndFaces.Add(planarFace);
}
if (potentialSweepEndFaces.Count < 2)
throw new InvalidOperationException("Can't find enough potential end faces.");
int i = 0;
PlanarFace candidateProfileFace = null; // the potential profile face for the swept solid
PlanarFace candidateProfileFace2 = null;
Edge candidatePathEdge = null;
bool foundCandidateFace = false;
do
{
candidateProfileFace = potentialSweepEndFaces[i++];
// find edges on the candidate profile face and the side faces with the edges
// later find edges on the other candidate profile face with same side faces
// they will be used to compare if the edges are congruent
// to make sure the two faces are the potential profile faces
Dictionary<Face, Edge> sideFacesWithCandidateEdges = new Dictionary<Face, Edge>();
EdgeArrayArray candidateFaceEdgeLoops = candidateProfileFace.EdgeLoops;
foreach (EdgeArray edgeArray in candidateFaceEdgeLoops)
{
foreach (Edge candidateEdge in edgeArray)
{
Face sideFace = candidateEdge.GetFace(0);
if (sideFace == candidateProfileFace)
sideFace = candidateEdge.GetFace(1);
if (sideFacesWithCandidateEdges.ContainsKey(sideFace)) // should not happen
throw new InvalidOperationException("Failed");
sideFacesWithCandidateEdges[sideFace] = candidateEdge;
}
}
double candidateProfileFaceArea = candidateProfileFace.Area;
foreach (PlanarFace theOtherCandidateFace in potentialSweepEndFaces)
{
if (theOtherCandidateFace.Equals(candidateProfileFace))
continue;
if (!MathUtil.IsAlmostEqual(candidateProfileFaceArea, theOtherCandidateFace.Area))
continue;
EdgeArrayArray theOtherCandidateFaceEdgeLoops = theOtherCandidateFace.EdgeLoops;
bool failToFindTheOtherCandidateFace = false;
Dictionary<Face, Edge> sideFacesWithTheOtherCandidateEdges = new Dictionary<Face, Edge>();
foreach (EdgeArray edgeArray in theOtherCandidateFaceEdgeLoops)
{
foreach (Edge theOtherCandidateEdge in edgeArray)
{
Face sideFace = theOtherCandidateEdge.GetFace(0);
if (sideFace == theOtherCandidateFace)
sideFace = theOtherCandidateEdge.GetFace(1);
if (!sideFacesWithCandidateEdges.ContainsKey(sideFace)) // should already have
{
failToFindTheOtherCandidateFace = true;
break;
}
if (sideFacesWithTheOtherCandidateEdges.ContainsKey(sideFace)) // should not happen
throw new InvalidOperationException("Failed");
sideFacesWithTheOtherCandidateEdges[sideFace] = theOtherCandidateEdge;
}
}
if (failToFindTheOtherCandidateFace)
continue;
if (sideFacesWithCandidateEdges.Count != sideFacesWithTheOtherCandidateEdges.Count)
continue;
// side faces with candidate profile face edges
Dictionary<Face, List<Edge>> sideFacesWithEdgesDic = new Dictionary<Face, List<Edge>>();
foreach (Face sideFace in sideFacesWithCandidateEdges.Keys)
{
sideFacesWithEdgesDic[sideFace] = new List<Edge>();
sideFacesWithEdgesDic[sideFace].Add(sideFacesWithCandidateEdges[sideFace]);
sideFacesWithEdgesDic[sideFace].Add(sideFacesWithTheOtherCandidateEdges[sideFace]);
}
if (!AreFacesSimpleCongruent(sideFacesWithEdgesDic))
continue;
// find candidate path edges
Dictionary<Face, List<Edge>> candidatePathEdgesWithFace = new Dictionary<Face, List<Edge>>();
foreach (KeyValuePair<Face, List<Edge>> sideFaceAndEdges in sideFacesWithEdgesDic)
{
List<Edge> pathEdges = FindCandidatePathEdge(sideFaceAndEdges.Key, sideFaceAndEdges.Value[0], sideFaceAndEdges.Value[1]);
// maybe we found two faces of an opening or a recess on the swept solid, skip in this case
if (pathEdges.Count < 2)
{
failToFindTheOtherCandidateFace = true;
break;
}
candidatePathEdgesWithFace[sideFaceAndEdges.Key] = pathEdges;
}
if (failToFindTheOtherCandidateFace)
continue;
// check if these edges are congruent
if (!AreEdgesSimpleCongruent(candidatePathEdgesWithFace))
continue;
candidatePathEdge = candidatePathEdgesWithFace.Values.ElementAt(0).ElementAt(0);
foundCandidateFace = true;
candidateProfileFace2 = theOtherCandidateFace;
break;
}
if (foundCandidateFace)
break;
} while (i < potentialSweepEndFaces.Count);
SimpleSweptSolidAnalyzer simpleSweptSolidAnalyzer = null;
if (foundCandidateFace)
{
simpleSweptSolidAnalyzer = new SimpleSweptSolidAnalyzer();
Curve pathCurve = candidatePathEdge.AsCurve();
XYZ endPoint0 = pathCurve.GetEndPoint(0);
bool foundProfileFace = false;
List<PlanarFace> profileFaces = new List<PlanarFace>();
profileFaces.Add(candidateProfileFace);
profileFaces.Add(candidateProfileFace2);
foreach (PlanarFace profileFace in profileFaces)
{
IntersectionResultArray intersectionResults;
profileFace.Intersect(pathCurve, out intersectionResults);
if (intersectionResults != null)
{
foreach (IntersectionResult intersectoinResult in intersectionResults)
{
XYZ intersectPoint = intersectoinResult.XYZPoint;
if (intersectPoint.IsAlmostEqualTo(endPoint0))
{
simpleSweptSolidAnalyzer.m_ProfileFace = profileFace;
foundProfileFace = true;
break;
}
}
}
if (foundProfileFace)
break;
}
if (!foundProfileFace)
throw new InvalidOperationException("Failed to find profile face.");
// TODO: consider one profile face has an opening extrusion inside while the other does not
List<Face> alignedFaces = FindAlignedFaces(profileFaces.ToList<Face>());
List<Face> unalignedFaces = new List<Face>();
foreach (Face face in faces)
{
if (profileFaces.Contains(face) || alignedFaces.Contains(face))
continue;
unalignedFaces.Add(face);
}
simpleSweptSolidAnalyzer.m_UnalignedFaces = unalignedFaces;
simpleSweptSolidAnalyzer.m_PathCurve = pathCurve;
simpleSweptSolidAnalyzer.m_ReferencePlaneNormal = normal;
}
return simpleSweptSolidAnalyzer;
}
/// <summary>
/// Creates a SweptSolidExporter.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="element">The element.</param>
/// <param name="solid">The solid.</param>
/// <param name="normal">The normal of the plane that the path lies on.</param>
/// <returns>The SweptSolidExporter.</returns>
public static SweptSolidExporter Create(ExporterIFC exporterIFC, Element element, SimpleSweptSolidAnalyzer sweptAnalyzer, GeometryObject geomObject)
{
try
{
if (sweptAnalyzer == null)
return null;
SweptSolidExporter sweptSolidExporter = null;
IList<Revit.IFC.Export.Utility.GeometryUtil.FaceBoundaryType> faceBoundaryTypes;
IList<CurveLoop> faceBoundaries = GeometryUtil.GetFaceBoundaries(sweptAnalyzer.ProfileFace, null, out faceBoundaryTypes);
string profileName = null;
if (element != null)
{
ElementType type = element.Document.GetElement(element.GetTypeId()) as ElementType;
if (type != null)
profileName = type.Name;
}
// Is it really an extrusion?
if (sweptAnalyzer.PathCurve is Line)
{
Line line = sweptAnalyzer.PathCurve as Line;
// invalid case
if (MathUtil.VectorsAreOrthogonal(line.Direction, sweptAnalyzer.ProfileFace.FaceNormal))
return null;
sweptSolidExporter = new SweptSolidExporter();
sweptSolidExporter.RepresentationType = ShapeRepresentationType.SweptSolid;
Plane plane = new Plane(sweptAnalyzer.ProfileFace.FaceNormal, sweptAnalyzer.ProfileFace.Origin);
sweptSolidExporter.RepresentationItem = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, profileName, faceBoundaries, plane,
line.Direction, UnitUtil.ScaleLength(line.Length));
}
else
{
sweptSolidExporter = new SweptSolidExporter();
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// Use tessellated geometry in IFC Reference View
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
// TODO: Create CreateSimpleSweptSolidAsTessellation routine that takes advantage of the superior tessellation of this class.
BodyExporterOptions options = new BodyExporterOptions(false);
sweptSolidExporter.RepresentationItem = BodyExporter.ExportBodyAsTriangulatedFaceSet(exporterIFC, element, options, geomObject);
sweptSolidExporter.RepresentationType = ShapeRepresentationType.Tessellation;
}
else
{
sweptSolidExporter.RepresentationItem = CreateSimpleSweptSolid(exporterIFC, profileName, faceBoundaries, sweptAnalyzer.ReferencePlaneNormal, sweptAnalyzer.PathCurve);
sweptSolidExporter.RepresentationType = ShapeRepresentationType.AdvancedSweptSolid;
}
}
else
{
sweptSolidExporter.Facets = CreateSimpleSweptSolidAsBRep(exporterIFC, profileName, faceBoundaries, sweptAnalyzer.ReferencePlaneNormal, sweptAnalyzer.PathCurve);
sweptSolidExporter.RepresentationType = ShapeRepresentationType.Brep;
}
}
return sweptSolidExporter;
}
catch (Exception)
{
return null;
}
}
/// <summary>
/// Creates a SweptSolidExporter.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="element">The element.</param>
/// <param name="solid">The solid.</param>
/// <param name="normal">The normal of the plane that the path lies on.</param>
/// <returns>The SweptSolidExporter.</returns>
public static SweptSolidExporter Create(ExporterIFC exporterIFC, Element element, SimpleSweptSolidAnalyzer sweptAnalyzer)
{
try
{
if (sweptAnalyzer == null)
return null;
SweptSolidExporter sweptSolidExporter = null;
IList<Revit.IFC.Export.Utility.GeometryUtil.FaceBoundaryType> faceBoundaryTypes;
IList<CurveLoop> faceBoundaries = GeometryUtil.GetFaceBoundaries(sweptAnalyzer.ProfileFace, null, out faceBoundaryTypes);
string profileName = null;
if (element != null)
{
ElementType type = element.Document.GetElement(element.GetTypeId()) as ElementType;
if (type != null)
profileName = type.Name;
}
// Is it really an extrusion?
if (sweptAnalyzer.PathCurve is Line)
{
Line line = sweptAnalyzer.PathCurve as Line;
// invalid case
if (MathUtil.VectorsAreOrthogonal(line.Direction, sweptAnalyzer.ProfileFace.Normal))
return null;
sweptSolidExporter = new SweptSolidExporter();
sweptSolidExporter.m_IsExtrusion = true;
Plane plane = new Plane(sweptAnalyzer.ProfileFace.Normal, sweptAnalyzer.ProfileFace.Origin);
sweptSolidExporter.m_RepresentationItem = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, profileName, faceBoundaries, plane,
line.Direction, UnitUtil.ScaleLength(line.Length));
}
else
{
sweptSolidExporter = new SweptSolidExporter();
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
sweptSolidExporter.m_RepresentationItem = CreateSimpleSweptSolid(exporterIFC, profileName, faceBoundaries, sweptAnalyzer.ReferencePlaneNormal, sweptAnalyzer.PathCurve);
else
sweptSolidExporter.m_Facets = CreateSimpleSweptSolidAsBRep(exporterIFC, profileName, faceBoundaries, sweptAnalyzer.ReferencePlaneNormal, sweptAnalyzer.PathCurve);
}
return sweptSolidExporter;
}
catch (Exception)
{
return null;
}
}
