public static bool Configure_PICkitSerial_For_I2CSlave_Auto_Mode(byte p_slave_addr, byte p_slave_mask, byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str)
{
byte[] array = new byte[65];
byte[] array2 = new byte[255];
byte[] array3 = new byte[65];
bool result = false;
string text = "";
Array.Clear(array, 0, array.Length);
Array.Clear(array3, 0, array3.Length);
Mode.update_status_packet_data(7, ref array3);
array3[23] = 2;
array3[29] = p_slave_addr;
array3[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
USBWrite.Send_Cold_Reset_Cmd();
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(array2, 0, array2.Length);
array2[0] = 0;
array2[1] = 5;
array2[2] = p_array_byte_count;
for (int i = 3; i < (int)(p_array_byte_count + 3); i++)
{
array2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref array2);
USBWrite.Send_Warm_Reset_Cmd();
if (flag)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int j;
for (j = 7; j < 31; j++)
{
if (Constants.STATUS_PACKET_DATA[j] != array[j - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", j - 7, Constants.STATUS_PACKET_DATA[j], array[j - 5]);
break;
}
}
if (j == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}
public static bool Configure_PICkitSerial_For_I2CSlave_Auto_Mode(byte p_slave_addr, byte p_slave_mask, byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str)
{
bool flag = false;
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0xff];
byte[] buffer3 = new byte[0x41];
bool flag2 = false;
string str = "";
int index = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(buffer3, 0, buffer3.Length);
Mode.update_status_packet_data(7, ref buffer3);
buffer3[0x17] = 2;
buffer3[0x1d] = p_slave_addr;
buffer3[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer3);
USBWrite.Send_Cold_Reset_Cmd();
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(buffer2, 0, buffer2.Length);
buffer2[0] = 0;
buffer2[1] = 5;
buffer2[2] = p_array_byte_count;
for (int i = 3; i < (p_array_byte_count + 3); i++)
{
buffer2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref buffer2);
USBWrite.Send_Warm_Reset_Cmd();
if (!flag)
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
if (!USBWrite.Update_Status_Packet())
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
Utilities.m_flags.g_status_packet_mutex.WaitOne();
index = 7;
while (index < 0x1f)
{
if (Constants.STATUS_PACKET_DATA[index] != array[index - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", index - 7, Constants.STATUS_PACKET_DATA[index], array[index - 5]);
break;
}
index++;
}
if (index == 0x1f)
{
flag2 = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
return(flag2);
}
public static bool Configure_PICkitSerial(int p_mode, bool p_reset)
{
bool flag = false;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if (Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
Mode.update_status_packet_data(p_mode, ref buffer2);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
flag = USBWrite.write_and_verify_config_block(ref array, ref str2, p_reset, ref str);
}
return(flag);
}
public static bool Configure_PICkitSerial(int p_mode, bool p_reset)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
Mode.update_status_packet_data(p_mode, ref array2);
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, p_reset, ref text);
}
return(result);
}
public static bool Configure_PICkitSerial_For_LINSlave_Mode(byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str, bool p_autobaud, ref int p_error_code)
{
bool flag = false;
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0xff];
byte[] buffer3 = new byte[0x41];
bool flag2 = false;
byte num = 0;
byte num2 = 0;
string str = "";
int index = 0;
p_error_code = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(buffer3, 0, buffer3.Length);
byte num4 = Number_Of_Bytes_In_CBUF3(ref num, ref num2);
if (p_array_byte_count > num4)
{
p_result_str = string.Format("Byte count of {0} greater than allowed value of {1}.", p_array_byte_count, num4);
p_error_code = 1;
return(flag);
}
USBWrite.Clear_CBUF(3);
if (p_autobaud)
{
Mode.update_status_packet_data(10, ref buffer3);
}
else
{
Mode.update_status_packet_data(0x13, ref buffer3);
}
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer3);
USBWrite.Send_Cold_Reset_Cmd();
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
USBWrite.Send_Warm_Reset_Cmd();
Array.Clear(buffer2, 0, buffer2.Length);
buffer2[0] = 0;
buffer2[1] = 5;
buffer2[2] = p_array_byte_count;
for (int i = 3; i < (p_array_byte_count + 3); i++)
{
buffer2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref buffer2);
buffer3[0x17] = (byte)(buffer3[0x17] | 0x20);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer3);
if (!USBWrite.Send_Data_Packet_To_PICkitS(ref array))
{
p_error_code = 2;
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
if (!USBWrite.Update_Status_Packet())
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
Utilities.m_flags.g_status_packet_mutex.WaitOne();
index = 7;
while (index < 0x1f)
{
if (Constants.STATUS_PACKET_DATA[index] != array[index - 5])
{
p_error_code = 3;
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", index - 7, Constants.STATUS_PACKET_DATA[index], array[index - 5]);
break;
}
index++;
}
if (index == 0x1f)
{
flag2 = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
return(flag2);
}
public static bool Configure_PICkitSerial_For_LINSlave_Mode(byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str, bool p_autobaud, ref int p_error_code)
{
bool flag = false;
byte[] array = new byte[65];
byte[] array2 = new byte[255];
byte[] array3 = new byte[65];
bool result = false;
byte b = 0;
byte b2 = 0;
string text = "";
p_error_code = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(array3, 0, array3.Length);
byte b3 = LIN.Number_Of_Bytes_In_CBUF3(ref b, ref b2);
if (p_array_byte_count > b3)
{
p_result_str = string.Format("Byte count of {0} greater than allowed value of {1}.", p_array_byte_count, b3);
p_error_code = 1;
return(flag);
}
USBWrite.Clear_CBUF(3);
if (p_autobaud)
{
Mode.update_status_packet_data(10, ref array3);
}
else
{
Mode.update_status_packet_data(19, ref array3);
}
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
USBWrite.Send_Cold_Reset_Cmd();
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
USBWrite.Send_Warm_Reset_Cmd();
Array.Clear(array2, 0, array2.Length);
array2[0] = 0;
array2[1] = 5;
array2[2] = p_array_byte_count;
for (int i = 3; i < (int)(p_array_byte_count + 3); i++)
{
array2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref array2);
byte[] expr_F9_cp_0 = array3;
int expr_F9_cp_1 = 23;
expr_F9_cp_0[expr_F9_cp_1] |= 32;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int j;
for (j = 7; j < 31; j++)
{
if (Constants.STATUS_PACKET_DATA[j] != array[j - 5])
{
p_error_code = 3;
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", j - 7, Constants.STATUS_PACKET_DATA[j], array[j - 5]);
break;
}
}
if (j == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_error_code = 2;
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}