/// <summary>
/// Creates a new comment line based on the position of the caret and Doxygen configuration.
/// </summary>
/// <param name="currentLine">Current line for reference.</param>
private void NewCommentLine(string currentLine)
{
ThreadHelper.ThrowIfNotOnUIThread();
string startSpaces = currentLine.Replace(currentLine.TrimStart(), "");
string endSpaces = currentLine.Replace(currentLine.TrimEnd(), "");
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
// Try to also guess proper indentation level based on the current line.
int oldLine = ts.ActivePoint.Line;
int oldOffset = ts.ActivePoint.LineCharOffset;
int extraIndent = 0;
while (!currentLine.StartsWith("/*!"))
{
if (m_regexTagSection.IsMatch(currentLine))
{
extraIndent = m_configService.Config.TagIndentation;
break;
}
ts.LineUp();
currentLine = ts.ActivePoint.CreateEditPoint().GetLines(ts.ActivePoint.Line, ts.ActivePoint.Line + 1);
currentLine = currentLine.TrimStart();
}
// Remove extra spaces from the previous line and add tag start line.
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.DeleteLeft(endSpaces.Length);
// TODO: This adds trailing space. Get rid of it similarly to SmartIndent().
ts.Insert(m_generator.GenerateTagStartLine(startSpaces) + new string(' ', extraIndent));
}
/// <summary>
/// Creates a new comment line based on the position of the caret and Doxygen configuration.
/// </summary>
/// <param name="currentLine">Current line for reference.</param>
private void NewCommentLine()
{
ThreadHelper.ThrowIfNotOnUIThread();
int lineNumber = m_textView.Caret.Position.BufferPosition.GetContainingLine().LineNumber;
string currentLine = m_textView.TextSnapshot.GetLineFromLineNumber(lineNumber).GetText();
string startSpaces = currentLine.Replace(currentLine.TrimStart(), "");
string endSpaces = currentLine.Replace(currentLine.TrimEnd(), "");
// Try to also guess proper indentation level based on the current line.
int extraIndent = 0;
int i = lineNumber;
string loopLine = currentLine;
while (!loopLine.StartsWith("/*!") || !loopLine.StartsWith("/**"))
{
if (m_regexTagSection.IsMatch(loopLine))
{
extraIndent = m_config.TagIndentation;
break;
}
--i;
if (i < 0 || i > m_textView.TextSnapshot.LineCount - 1)
{
break;
}
loopLine = m_textView.TextSnapshot.GetLineFromLineNumber(i).GetText().TrimStart();
}
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
ts.DeleteLeft(endSpaces.Length);
if (currentLine.EndsWith("*/"))
{
ts.MoveToLineAndOffset(ts.CurrentLine, currentLine.Length - 1);
}
else
{
ts.MoveToLineAndOffset(ts.CurrentLine, currentLine.Length + 1);
}
// TODO: This adds trailing space. Get rid of it similarly to SmartIndent().
ts.Insert(m_generator.GenerateTagStartLine(startSpaces) + new string(' ', extraIndent));
}
/// <summary>
/// 智能分号：
/// * 如果在一行的中间任何位置按下分号，则跳到行结尾添加分号，如果行未已经有一个分号则不重复添加
/// * 再按一次分号，则删除在行尾添加的分号，回到刚才的位置插入一个分号
/// </summary>
/// <param name="keypress"></param>
/// <param name="selection"></param>
/// <param name="inStatementCompletion"></param>
/// <param name="cancelKeypress"></param>
public bool BeforeKeyPress(string keypress, TextSelection selection, bool inStatementCompletion, ref bool cancelKeypress)
{
if (!selection.IsEmpty || keypress != ";")
{
_smartSemicolonFallback = false;
return(false);
}
if (_smartSemicolonFallback && selection.CurrentLine == _smartSemicolonLine &&
selection.ActivePoint.AtEndOfLine && selection.ActivePoint.CreateEditPoint().GetText(-1) == ";")
{
// 重复输入分号, 删除原来行尾的分号，并退回到原位置插入分号
if (_smartSemicolonDeleteLineEnd)
{
selection.DeleteLeft(1);
}
selection.MoveTo(_smartSemicolonLine, _smartSemicolonColumn, false);
_smartSemicolonFallback = false;
cancelKeypress = false;
}
else
{
// 智能分号，记录位置并移动到行尾插入分号
_smartSemicolonFallback = true;
_smartSemicolonLine = selection.ActivePoint.Line;
_smartSemicolonColumn = selection.ActivePoint.DisplayColumn;
selection.EndOfLine();
var caret = selection.ActivePoint.CreateEditPoint();
if (caret.GetText(-1) == ";")
{
cancelKeypress = true;
_smartSemicolonDeleteLineEnd = false;
}
else
{
cancelKeypress = false;
_smartSemicolonDeleteLineEnd = true;
}
}
return(true);
}
/// <summary>
/// Generates a Doxygen comment block to the current caret location.
/// </summary>
private void GenerateComment()
{
var currentILine = m_textView.TextSnapshot.GetLineFromPosition(m_textView.Caret.Position.BufferPosition.Position);
int len = m_textView.Caret.Position.BufferPosition.Position - currentILine.Start.Position;
string currentLine = m_textView.TextSnapshot.GetText(currentILine.Start.Position, len);
string spaces = currentLine.Replace(currentLine.TrimStart(), "");
ThreadHelper.ThrowIfNotOnUIThread();
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
// Save current care position.
int oldLine = ts.ActivePoint.Line;
int oldOffset = ts.ActivePoint.LineCharOffset;
// Check if we're at the beginning of the document and should generate a file comment.
if (oldLine == 1)
{
string fileComment = m_generator.GenerateFileComment(m_dte, out int selectedLine);
ts.DeleteLeft(2); // Removing the // part here.
ts.Insert(fileComment);
// Move the caret.
ts.MoveToLineAndOffset(selectedLine + 1, 1);
ts.EndOfLine();
return;
}
// Search for the associated code element for which to generate the comment.
CodeElement codeElement = null;
ts.LineDown();
ts.EndOfLine();
FileCodeModel fcm = m_dte.ActiveDocument.ProjectItem.FileCodeModel;
if (fcm != null)
{
while (codeElement == null)
{
codeElement = fcm.CodeElementFromPoint(ts.ActivePoint, vsCMElement.vsCMElementFunction);
if (ts.ActivePoint.AtEndOfDocument)
{
break;
}
if (codeElement == null)
{
ts.LineDown();
}
}
}
// Generate the comment and add it to the document.
string doxyComment = m_generator.GenerateComment(spaces, codeElement, "");
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.DeleteLeft(2); // Removing the // part here.
ts.Insert(doxyComment);
// Move caret to the position where the main comment will be written.
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.LineDown();
ts.EndOfLine();
}
public int Exec(ref Guid pguidCmdGroup, uint nCmdID, uint nCmdexecopt, IntPtr pvaIn, IntPtr pvaOut)
{
try
{
ThreadHelper.ThrowIfNotOnUIThread();
if (VsShellUtilities.IsInAutomationFunction(m_provider.ServiceProvider))
{
return(m_nextCommandHandler.Exec(ref pguidCmdGroup, nCmdID, nCmdexecopt, pvaIn, pvaOut));
}
// make a copy of this so we can look at it after forwarding some commands
uint commandID = nCmdID;
char typedChar = char.MinValue;
// make sure the input is a char before getting it
if (pguidCmdGroup == VSConstants.VSStd2K && nCmdID == (uint)VSConstants.VSStd2KCmdID.TYPECHAR)
{
typedChar = (char)(ushort)Marshal.GetObjectForNativeVariant(pvaIn);
}
// Check if it is a commit character, to generate a multiline comment
bool isCommitChar = nCmdID == (uint)VSConstants.VSStd2KCmdID.RETURN ||
nCmdID == (uint)VSConstants.VSStd2KCmdID.TAB;
bool showCompletion = nCmdID == (uint)VSConstants.VSStd2KCmdID.COMPLETEWORD;
// Handle only typed characters or in case of an active completion also deletions
if (typedChar == '\0' && !isCommitChar && !showCompletion)
{
return(m_nextCommandHandler.Exec(ref pguidCmdGroup, nCmdID, nCmdexecopt, pvaIn, pvaOut));
}
// check if the last character of one of the supported shortcuts is typed
if (!m_provider.CompletionBroker.IsCompletionActive(m_textView) &&
m_dte != null &&
(typedChar == m_header_char || isCommitChar || typedChar == '!'))
{
var currentILine = m_textView.TextSnapshot.GetLineFromPosition(
m_textView.Caret.Position.BufferPosition.Position);
int len = m_textView.Caret.Position.BufferPosition.Position - currentILine.Start.Position;
string currentLine = m_textView.TextSnapshot.GetText(currentILine.Start.Position, len);
string currentLineFull = currentILine.GetText();
string typed_shortcut = (currentLine + typedChar).Trim();
if (typed_shortcut.Trim().Length >= 3)
{
// Get the current text properties
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
int oldLine = ts.ActivePoint.Line;
int oldOffset = ts.ActivePoint.LineCharOffset;
string lineEnding = GetLineEnding();
// First use only single line comment
// Single line comments are not supported in the first line, because of the header comment
if (typedChar == '*' && typed_shortcut == "/**" && oldLine > 1)
{
ts.Insert(typedChar + " ");
if (!currentLineFull.Contains("*/"))
{
ts.Insert("*/");
}
ts.MoveToLineAndOffset(oldLine, oldOffset + 2);
return(VSConstants.S_OK);
}
// If it is a commit character check if there is a comment to expand
if (isCommitChar &&
ShouldExpand(ts, currentLineFull, oldLine, oldOffset, out var commentFormat, out var codeElement, out var shortcut))
{
// Replace all possible comment characters to get the raw brief
string currentText = Regex.Replace(currentLineFull.Replace(shortcut, ""), @"\/\*+|\*+\/|\/\/+", "").Trim();
// Delete current comment
int lenToDelete = Regex.Replace(currentLineFull, @".*\/\*|^[^\/]*\/\/", "").Length;
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.EndOfLine();
ts.DeleteLeft(lenToDelete);
// Create new multiline comment
currentLine = currentLineFull.Substring(0, currentLineFull.Length - lenToDelete);
currentLineFull = currentLine;
oldOffset = ts.ActivePoint.LineCharOffset;
return(InsertMultilineComment(commentFormat, codeElement, ts, currentLine, lineEnding,
oldLine, oldOffset, currentText));
}
// The header can be used without single line format
else if (oldLine == 1)
{
var headerShortcut = m_settings.HeaderFormat.Substring(0, 3);
if (typed_shortcut == headerShortcut || typed_shortcut == "/**" || typed_shortcut == "/*!" || typed_shortcut == "///")
{
// Delete current end comment chars
ts.EndOfLine();
int lenToDelete = ts.ActivePoint.LineCharOffset - oldOffset;
ts.DeleteLeft(lenToDelete);
return(InsertMultilineComment(CommentFormat.header, null, ts, currentLine, lineEnding,
oldLine, oldOffset, ""));
}
}
// '/*!' is a always active shortcut without single line
// This is for an eseaier beginning and for the same workflow as older versions
else if (typed_shortcut == "/*!")
{
var _commentFormat = GetCommentFormat(ts, oldLine, oldOffset, out var _codeElement);
// Delete current end comment chars
ts.EndOfLine();
int lenToDelete = ts.ActivePoint.LineCharOffset - oldOffset;
ts.DeleteLeft(lenToDelete);
return(InsertMultilineComment(_commentFormat, _codeElement, ts, currentLine, lineEnding,
oldLine, oldOffset, ""));
}
}
}
if (m_session != null && !m_session.IsDismissed)
{
// check for a commit character
if (nCmdID == (uint)VSConstants.VSStd2KCmdID.RETURN ||
nCmdID == (uint)VSConstants.VSStd2KCmdID.TAB)
{
// check for a selection
// if the selection is fully selected, commit the current session
if (m_session.SelectedCompletionSet.SelectionStatus.IsSelected)
{
m_session.Commit();
// also, don't add the character to the buffer
return(VSConstants.S_OK);
}
else
{
// if there is no selection, dismiss the session
m_session.Dismiss();
}
}
}
else if (!m_provider.CompletionBroker.IsCompletionActive(m_textView))
{
if (pguidCmdGroup == VSConstants.VSStd2K && nCmdID == (uint)VSConstants.VSStd2KCmdID.RETURN)
{
ITextSnapshotLine currentILine = m_textView.TextSnapshot.GetLineFromPosition(
m_textView.Caret.Position.BufferPosition.Position);
string currentLine = currentILine.GetText();
// TODO: check for being inside a comment block
// Insert a '*' when creating a new line in a mutline comment
if (currentLine.TrimStart().StartsWith("*") && !currentLine.Contains("*/"))
{
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
string spaces = currentLine.Replace(currentLine.TrimStart(), "");
string lineEnding = GetLineEnding();
ts.Insert(lineEnding + spaces + "* ");
return(VSConstants.S_OK);
}
// Insert a '///' when creating a new line in a mutline comment
if (currentLine.TrimStart().StartsWith("///"))
{
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
string spaces = currentLine.Replace(currentLine.TrimStart(), "");
string lineEnding = GetLineEnding();
ts.Insert(lineEnding + spaces + "/// ");
return(VSConstants.S_OK);
}
}
}
// pass along the command so the char is added to the buffer
int retVal = m_nextCommandHandler.Exec(ref pguidCmdGroup, nCmdID, nCmdexecopt, pvaIn, pvaOut);
if (typedChar == '\\' || typedChar == '@' || showCompletion)
{
string currentLine = m_textView.TextSnapshot.GetLineFromPosition(
m_textView.Caret.Position.BufferPosition.Position).GetText();
if (currentLine.TrimStart().StartsWith("*") || currentLine.TrimStart().StartsWith("///"))
{
if (m_session == null || m_session.IsDismissed) // If there is no active session, bring up completion
{
if (this.TriggerCompletion())
{
m_session.SelectedCompletionSet.SelectBestMatch();
m_session.SelectedCompletionSet.Recalculate();
return(VSConstants.S_OK);
}
}
}
}
else if (
commandID == (uint)VSConstants.VSStd2KCmdID.BACKSPACE ||
commandID == (uint)VSConstants.VSStd2KCmdID.DELETE ||
char.IsLetter(typedChar))
{
if (m_session != null && !m_session.IsDismissed) // the completion session is already active, so just filter
{
m_session.SelectedCompletionSet.SelectBestMatch();
m_session.SelectedCompletionSet.Recalculate();
return(VSConstants.S_OK);
}
}
return(retVal);
}
/// <summary>
/// Generates a Doxygen comment block to the current caret location.
/// </summary>
private void GenerateComment()
{
var currentILine = m_textView.TextSnapshot.GetLineFromPosition(m_textView.Caret.Position.BufferPosition.Position);
int len = m_textView.Caret.Position.BufferPosition.Position - currentILine.Start.Position;
string currentLine = m_textView.TextSnapshot.GetText(currentILine.Start.Position, len);
string spaces = currentLine.Replace(currentLine.TrimStart(), "");
string next2char = m_textView.TextSnapshot.GetText(currentILine.Start.Position + len, 2);
ThreadHelper.ThrowIfNotOnUIThread();
TextSelection ts = m_dte.ActiveDocument.Selection as TextSelection;
// Save current care position.
int oldLine = ts.ActivePoint.Line;
int oldOffset = ts.ActivePoint.LineCharOffset;
// Removing the auto inserted "*/"
if (next2char == "*/")
{
ts.Delete(2);
}
// Check if we're at the beginning of the document and should generate a file comment.
if (oldLine == 1)
{
string fileComment = m_generator.GenerateFileComment(m_dte, out int selectedLine);
ts.DeleteLeft(2); // Removing the // part here.
ts.Insert(fileComment);
// Move the caret.
ts.MoveToLineAndOffset(selectedLine + 1, 1);
ts.EndOfLine();
return;
}
// Search for the associated code element for which to generate the comment.
CodeElement codeElement = null;
ts.LineDown();
ts.EndOfLine();
FileCodeModel fcm = this.GetFileCodeModel(m_dte.ActiveDocument);
if (fcm != null)
{
while (codeElement == null)
{
codeElement = CodeElementFromPoint(fcm, ts.ActivePoint,
vsCMElement.vsCMElementNamespace,
vsCMElement.vsCMElementClass,
vsCMElement.vsCMElementStruct,
vsCMElement.vsCMElementEnum,
vsCMElement.vsCMElementFunction,
vsCMElement.vsCMElementUnion);
if (ts.ActivePoint.AtEndOfDocument)
{
break;
}
if (codeElement == null)
{
ts.LineDown();
}
}
// if active line is in function body, set codeElement to null
if (codeElement is CodeFunction function && oldLine > codeElement.StartPoint.Line && oldLine < codeElement.EndPoint.Line)
{
codeElement = null;
}
}
// Generate the comment and add it to the document.
string doxyComment = m_generator.GenerateComment(spaces, codeElement, "");
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.DeleteLeft(2); // Removing the // part here.
ts.Insert(doxyComment);
if (!m_generator.UseSingleLineComment(codeElement))
{
// Move caret to the position where the main comment will be written.
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.LineDown();
ts.EndOfLine();
}
else
{
ts.MoveToLineAndOffset(oldLine, oldOffset + 2);
}
}
/// <summary>
/// This function is the callback used to execute the command when the menu item is clicked.
/// See the constructor to see how the menu item is associated with this function using
/// OleMenuCommandService service and MenuCommand class.
/// </summary>
/// <param name="sender">Event sender.</param>
/// <param name="e">Event args.</param>
private void Execute(object sender, EventArgs e)
{
ThreadHelper.ThrowIfNotOnUIThread();
var dte = Package.GetGlobalService(typeof(DTE)) as DTE;
if (dte == null || dte.ActiveDocument == null)
{
return;
}
TextSelection ts = dte.ActiveDocument.Selection as TextSelection;
// Check if we're at the beginning of the document and should generate a file comment.
if (ts.ActivePoint.Line == 1)
{
string fileComment = m_generator.GenerateFileComment(dte, out int selectedLine);
ts.DeleteLeft(2); // Removing the // part here.
ts.Insert(fileComment);
// Move the caret.
ts.MoveToLineAndOffset(selectedLine + 1, 1);
ts.EndOfLine();
return;
}
ts.EndOfLine();
// Scroll down until we find a non-comment line.
if (!ScrollToCodeStart(ts))
{
return;
}
// Save the position so that we know where to place the comment.
ts.StartOfLine();
var funcPoint = ts.ActivePoint.CreateEditPoint();
int oldLine = ts.ActivePoint.Line;
int oldOffset = ts.ActivePoint.LineCharOffset;
ts.EndOfLine();
// Determine indentation level.
string currentLine = ts.ActivePoint.CreateEditPoint().GetLines(ts.ActivePoint.Line, ts.ActivePoint.Line + 1);
string spaces = currentLine.Replace(currentLine.TrimStart(), "");
// Search for the associated code element.
CodeElement codeElement = null;
FileCodeModel fcm = dte.ActiveDocument.ProjectItem.FileCodeModel;
if (fcm != null)
{
while (codeElement == null)
{
codeElement = fcm.CodeElementFromPoint(ts.ActivePoint, vsCMElement.vsCMElementFunction);
if (ts.ActivePoint.AtEndOfDocument)
{
break;
}
if (codeElement == null || !(codeElement is CodeFunction))
{
codeElement = null;
ts.LineDown();
ts.EndOfLine();
}
}
}
// Extract existing comment if found.
ts.MoveToLineAndOffset(oldLine, oldOffset);
int startLine = ExtractComment(ts, out string existingDoxyComment);
// Delete old comment from the text.
if (startLine >= 0)
{
ts.ActivePoint.CreateEditPoint().Delete(funcPoint);
oldLine = ts.ActivePoint.Line;
oldOffset = ts.ActivePoint.LineCharOffset;
}
// Generate new comment.
string doxyComment = m_generator.GenerateComment(spaces, codeElement, existingDoxyComment);
// Write the doxygen comment to the correct position.
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.LineUp();
// If the upper line is empty, we should go to the start of the line. Otherwise go to the end of the line.
currentLine = ts.ActivePoint.CreateEditPoint().GetLines(ts.ActivePoint.Line, ts.ActivePoint.Line + 1);
if (currentLine.Trim().Length == 0)
{
ts.StartOfLine();
}
else
{
ts.EndOfLine();
}
ts.Insert("\r\n" + spaces + doxyComment);
// If this is a new comment, move to the main comment position immediately.
if (startLine < 0)
{
ts.MoveToLineAndOffset(oldLine, oldOffset);
ts.LineDown();
ts.EndOfLine();
}
}
