private static Node HandleNegate(IntrusiveList <Node> nodes, Node node, Operation operation)
{
// There's no SSE FP negate instruction, so we need to transform that into
// a XOR of the value to be negated with a mask with the highest bit set.
// This also produces -0 for a negation of the value 0.
Operand dest = operation.Destination;
Operand source = operation.GetSource(0);
Debug.Assert(dest.Type == OperandType.FP32 ||
dest.Type == OperandType.FP64, $"Invalid destination type \"{dest.Type}\".");
Node currentNode = node;
Operand res = Local(dest.Type);
node = nodes.AddAfter(node, new Operation(Instruction.VectorOne, res));
if (dest.Type == OperandType.FP32)
{
node = nodes.AddAfter(node, new IntrinsicOperation(Intrinsic.X86Pslld, res, res, Const(31)));
}
else /* if (dest.Type == OperandType.FP64) */
{
node = nodes.AddAfter(node, new IntrinsicOperation(Intrinsic.X86Psllq, res, res, Const(63)));
}
node = nodes.AddAfter(node, new IntrinsicOperation(Intrinsic.X86Xorps, res, res, source));
node = nodes.AddAfter(node, new Operation(Instruction.Copy, dest, res));
Delete(nodes, currentNode, operation);
return(node);
}
private static Node HandleConvertToFPUI(IntrusiveList <Node> nodes, Node node, Operation operation)
{
// Unsigned integer to FP conversions are not supported on X86.
// We need to turn them into signed integer to FP conversions, and
// adjust the final result.
Operand dest = operation.Destination;
Operand source = operation.GetSource(0);
Debug.Assert(source.Type.IsInteger(), $"Invalid source type \"{source.Type}\".");
Node currentNode = node;
if (source.Type == OperandType.I32)
{
// For 32-bits integers, we can just zero-extend to 64-bits,
// and then use the 64-bits signed conversion instructions.
Operand zex = Local(OperandType.I64);
node = nodes.AddAfter(node, new Operation(Instruction.ZeroExtend32, zex, source));
node = nodes.AddAfter(node, new Operation(Instruction.ConvertToFP, dest, zex));
}
else /* if (source.Type == OperandType.I64) */
{
// For 64-bits integers, we need to do the following:
// - Ensure that the integer has the most significant bit clear.
// -- This can be done by shifting the value right by 1, that is, dividing by 2.
// -- The least significant bit is lost in this case though.
// - We can then convert the shifted value with a signed integer instruction.
// - The result still needs to be corrected after that.
// -- First, we need to multiply the result by 2, as we divided it by 2 before.
// --- This can be done efficiently by adding the result to itself.
// -- Then, we need to add the least significant bit that was shifted out.
// --- We can convert the least significant bit to float, and add it to the result.
Operand lsb = Local(OperandType.I64);
Operand half = Local(OperandType.I64);
Operand lsbF = Local(dest.Type);
node = nodes.AddAfter(node, new Operation(Instruction.Copy, lsb, source));
node = nodes.AddAfter(node, new Operation(Instruction.Copy, half, source));
node = nodes.AddAfter(node, new Operation(Instruction.BitwiseAnd, lsb, lsb, Const(1L)));
node = nodes.AddAfter(node, new Operation(Instruction.ShiftRightUI, half, half, Const(1)));
node = nodes.AddAfter(node, new Operation(Instruction.ConvertToFP, lsbF, lsb));
node = nodes.AddAfter(node, new Operation(Instruction.ConvertToFP, dest, half));
node = nodes.AddAfter(node, new Operation(Instruction.Add, dest, dest, dest));
node = nodes.AddAfter(node, new Operation(Instruction.Add, dest, dest, lsbF));
}
Delete(nodes, currentNode, operation);
return(node);
}
private static Node HandleVectorInsert8(IntrusiveList <Node> nodes, Node node, Operation operation)
{
// Handle vector insertion, when SSE 4.1 is not supported.
Operand dest = operation.Destination;
Operand src1 = operation.GetSource(0); // Vector
Operand src2 = operation.GetSource(1); // Value
Operand src3 = operation.GetSource(2); // Index
Debug.Assert(src3.Kind == OperandKind.Constant);
byte index = src3.AsByte();
Debug.Assert(index < 16);
Node currentNode = node;
Operand temp1 = Local(OperandType.I32);
Operand temp2 = Local(OperandType.I32);
node = nodes.AddAfter(node, new Operation(Instruction.Copy, temp2, src2));
Operation vextOp = new Operation(Instruction.VectorExtract16, temp1, src1, Const(index >> 1));
node = nodes.AddAfter(node, vextOp);
if ((index & 1) != 0)
{
node = nodes.AddAfter(node, new Operation(Instruction.ZeroExtend8, temp1, temp1));
node = nodes.AddAfter(node, new Operation(Instruction.ShiftLeft, temp2, temp2, Const(8)));
node = nodes.AddAfter(node, new Operation(Instruction.BitwiseOr, temp1, temp1, temp2));
}
else
{
node = nodes.AddAfter(node, new Operation(Instruction.ZeroExtend8, temp2, temp2));
node = nodes.AddAfter(node, new Operation(Instruction.BitwiseAnd, temp1, temp1, Const(0xff00)));
node = nodes.AddAfter(node, new Operation(Instruction.BitwiseOr, temp1, temp1, temp2));
}
Operation vinsOp = new Operation(Instruction.VectorInsert16, dest, src1, temp1, Const(index >> 1));
node = nodes.AddAfter(node, vinsOp);
Delete(nodes, currentNode, operation);
return(node);
}
private static Node HandleCallSystemVAbi(IntrusiveList <Node> nodes, Node node, Operation operation)
{
Operand dest = operation.Destination;
List <Operand> sources = new List <Operand>
{
operation.GetSource(0)
};
int argsCount = operation.SourcesCount - 1;
int intMax = CallingConvention.GetIntArgumentsOnRegsCount();
int vecMax = CallingConvention.GetVecArgumentsOnRegsCount();
int intCount = 0;
int vecCount = 0;
int stackOffset = 0;
for (int index = 0; index < argsCount; index++)
{
Operand source = operation.GetSource(index + 1);
bool passOnReg;
if (source.Type.IsInteger())
{
passOnReg = intCount < intMax;
}
else if (source.Type == OperandType.V128)
{
passOnReg = intCount + 1 < intMax;
}
else
{
passOnReg = vecCount < vecMax;
}
if (source.Type == OperandType.V128 && passOnReg)
{
// V128 is a struct, we pass each half on a GPR if possible.
Operand argReg = Gpr(CallingConvention.GetIntArgumentRegister(intCount++), OperandType.I64);
Operand argReg2 = Gpr(CallingConvention.GetIntArgumentRegister(intCount++), OperandType.I64);
nodes.AddBefore(node, new Operation(Instruction.VectorExtract, argReg, source, Const(0)));
nodes.AddBefore(node, new Operation(Instruction.VectorExtract, argReg2, source, Const(1)));
continue;
}
if (passOnReg)
{
Operand argReg = source.Type.IsInteger()
? Gpr(CallingConvention.GetIntArgumentRegister(intCount++), source.Type)
: Xmm(CallingConvention.GetVecArgumentRegister(vecCount++), source.Type);
Operation copyOp = new Operation(Instruction.Copy, argReg, source);
HandleConstantCopy(nodes, nodes.AddBefore(node, copyOp), copyOp);
sources.Add(argReg);
}
else
{
Operand offset = new Operand(stackOffset);
Operation spillOp = new Operation(Instruction.SpillArg, null, offset, source);
HandleConstantCopy(nodes, nodes.AddBefore(node, spillOp), spillOp);
stackOffset += source.Type.GetSizeInBytes();
}
}
if (dest != null)
{
if (dest.Type == OperandType.V128)
{
Operand retLReg = Gpr(CallingConvention.GetIntReturnRegister(), OperandType.I64);
Operand retHReg = Gpr(CallingConvention.GetIntReturnRegisterHigh(), OperandType.I64);
node = nodes.AddAfter(node, new Operation(Instruction.VectorCreateScalar, dest, retLReg));
node = nodes.AddAfter(node, new Operation(Instruction.VectorInsert, dest, dest, retHReg, Const(1)));
operation.Destination = null;
}
else
{
Operand retReg = dest.Type.IsInteger()
? Gpr(CallingConvention.GetIntReturnRegister(), dest.Type)
: Xmm(CallingConvention.GetVecReturnRegister(), dest.Type);
Operation copyOp = new Operation(Instruction.Copy, dest, retReg);
node = nodes.AddAfter(node, copyOp);
operation.Destination = retReg;
}
}
operation.SetSources(sources.ToArray());
return(node);
}
private static Node HandleCallWindowsAbi(IntrusiveList <Node> nodes, StackAllocator stackAlloc, Node node, Operation operation)
{
Operand dest = operation.Destination;
// Handle struct arguments.
int retArgs = 0;
int stackAllocOffset = 0;
int AllocateOnStack(int size)
{
// We assume that the stack allocator is initially empty (TotalSize = 0).
// Taking that into account, we can reuse the space allocated for other
// calls by keeping track of our own allocated size (stackAllocOffset).
// If the space allocated is not big enough, then we just expand it.
int offset = stackAllocOffset;
if (stackAllocOffset + size > stackAlloc.TotalSize)
{
stackAlloc.Allocate((stackAllocOffset + size) - stackAlloc.TotalSize);
}
stackAllocOffset += size;
return(offset);
}
Operand arg0Reg = null;
if (dest != null && dest.Type == OperandType.V128)
{
int stackOffset = AllocateOnStack(dest.Type.GetSizeInBytes());
arg0Reg = Gpr(CallingConvention.GetIntArgumentRegister(0), OperandType.I64);
Operation allocOp = new Operation(Instruction.StackAlloc, arg0Reg, Const(stackOffset));
nodes.AddBefore(node, allocOp);
retArgs = 1;
}
int argsCount = operation.SourcesCount - 1;
int maxArgs = CallingConvention.GetArgumentsOnRegsCount() - retArgs;
if (argsCount > maxArgs)
{
argsCount = maxArgs;
}
Operand[] sources = new Operand[1 + retArgs + argsCount];
sources[0] = operation.GetSource(0);
if (arg0Reg != null)
{
sources[1] = arg0Reg;
}
for (int index = 1; index < operation.SourcesCount; index++)
{
Operand source = operation.GetSource(index);
if (source.Type == OperandType.V128)
{
Operand stackAddr = Local(OperandType.I64);
int stackOffset = AllocateOnStack(source.Type.GetSizeInBytes());
nodes.AddBefore(node, new Operation(Instruction.StackAlloc, stackAddr, Const(stackOffset)));
Operation storeOp = new Operation(Instruction.Store, null, stackAddr, source);
HandleConstantCopy(nodes, nodes.AddBefore(node, storeOp), storeOp);
operation.SetSource(index, stackAddr);
}
}
// Handle arguments passed on registers.
for (int index = 0; index < argsCount; index++)
{
Operand source = operation.GetSource(index + 1);
Operand argReg;
int argIndex = index + retArgs;
if (source.Type.IsInteger())
{
argReg = Gpr(CallingConvention.GetIntArgumentRegister(argIndex), source.Type);
}
else
{
argReg = Xmm(CallingConvention.GetVecArgumentRegister(argIndex), source.Type);
}
Operation copyOp = new Operation(Instruction.Copy, argReg, source);
HandleConstantCopy(nodes, nodes.AddBefore(node, copyOp), copyOp);
sources[1 + retArgs + index] = argReg;
}
// The remaining arguments (those that are not passed on registers)
// should be passed on the stack, we write them to the stack with "SpillArg".
for (int index = argsCount; index < operation.SourcesCount - 1; index++)
{
Operand source = operation.GetSource(index + 1);
Operand offset = new Operand((index + retArgs) * 8);
Operation spillOp = new Operation(Instruction.SpillArg, null, offset, source);
HandleConstantCopy(nodes, nodes.AddBefore(node, spillOp), spillOp);
}
if (dest != null)
{
if (dest.Type == OperandType.V128)
{
Operand retValueAddr = Local(OperandType.I64);
nodes.AddBefore(node, new Operation(Instruction.Copy, retValueAddr, arg0Reg));
Operation loadOp = new Operation(Instruction.Load, dest, retValueAddr);
node = nodes.AddAfter(node, loadOp);
operation.Destination = null;
}
else
{
Operand retReg = dest.Type.IsInteger()
? Gpr(CallingConvention.GetIntReturnRegister(), dest.Type)
: Xmm(CallingConvention.GetVecReturnRegister(), dest.Type);
Operation copyOp = new Operation(Instruction.Copy, dest, retReg);
node = nodes.AddAfter(node, copyOp);
operation.Destination = retReg;
}
}
operation.SetSources(sources);
return(node);
}
private static Node HandleSameDestSrc1Copy(IntrusiveList <Node> nodes, Node node, Operation operation)
{
if (operation.Destination == null || operation.SourcesCount == 0)
{
return(node);
}
Instruction inst = operation.Instruction;
Operand dest = operation.Destination;
Operand src1 = operation.GetSource(0);
// The multiply instruction (that maps to IMUL) is somewhat special, it has
// a three operand form where the second source is a immediate value.
bool threeOperandForm = inst == Instruction.Multiply && operation.GetSource(1).Kind == OperandKind.Constant;
if (IsSameOperandDestSrc1(operation) && src1.Kind == OperandKind.LocalVariable && !threeOperandForm)
{
bool useNewLocal = false;
for (int srcIndex = 1; srcIndex < operation.SourcesCount; srcIndex++)
{
if (operation.GetSource(srcIndex) == dest)
{
useNewLocal = true;
break;
}
}
if (useNewLocal)
{
// Dest is being used as some source already, we need to use a new
// local to store the temporary value, otherwise the value on dest
// local would be overwritten.
Operand temp = Local(dest.Type);
nodes.AddBefore(node, new Operation(Instruction.Copy, temp, src1));
operation.SetSource(0, temp);
node = nodes.AddAfter(node, new Operation(Instruction.Copy, dest, temp));
operation.Destination = temp;
}
else
{
nodes.AddBefore(node, new Operation(Instruction.Copy, dest, src1));
operation.SetSource(0, dest);
}
}
else if (inst == Instruction.ConditionalSelect)
{
Operand src2 = operation.GetSource(1);
Operand src3 = operation.GetSource(2);
if (src1 == dest || src2 == dest)
{
Operand temp = Local(dest.Type);
nodes.AddBefore(node, new Operation(Instruction.Copy, temp, src3));
operation.SetSource(2, temp);
node = nodes.AddAfter(node, new Operation(Instruction.Copy, dest, temp));
operation.Destination = temp;
}
else
{
nodes.AddBefore(node, new Operation(Instruction.Copy, dest, src3));
operation.SetSource(2, dest);
}
}
return(node);
}
private static Node HandleFixedRegisterCopy(IntrusiveList <Node> nodes, Node node, Operation operation)
{
Operand dest = operation.Destination;
switch (operation.Instruction)
{
case Instruction.CompareAndSwap128:
{
// Handle the many restrictions of the compare and exchange (16 bytes) instruction:
// - The expected value should be in RDX:RAX.
// - The new value to be written should be in RCX:RBX.
// - The value at the memory location is loaded to RDX:RAX.
void SplitOperand(Operand source, Operand lr, Operand hr)
{
nodes.AddBefore(node, new Operation(Instruction.VectorExtract, lr, source, Const(0)));
nodes.AddBefore(node, new Operation(Instruction.VectorExtract, hr, source, Const(1)));
}
Operand rax = Gpr(X86Register.Rax, OperandType.I64);
Operand rbx = Gpr(X86Register.Rbx, OperandType.I64);
Operand rcx = Gpr(X86Register.Rcx, OperandType.I64);
Operand rdx = Gpr(X86Register.Rdx, OperandType.I64);
SplitOperand(operation.GetSource(1), rax, rdx);
SplitOperand(operation.GetSource(2), rbx, rcx);
node = nodes.AddAfter(node, new Operation(Instruction.VectorCreateScalar, dest, rax));
node = nodes.AddAfter(node, new Operation(Instruction.VectorInsert, dest, dest, rdx, Const(1)));
operation.SetDestinations(new Operand[] { rdx, rax });
operation.SetSources(new Operand[] { operation.GetSource(0), rdx, rax, rcx, rbx });
break;
}
case Instruction.CpuId:
{
// Handle the many restrictions of the CPU Id instruction:
// - EAX controls the information returned by this instruction.
// - When EAX is 1, feature information is returned.
// - The information is written to registers EAX, EBX, ECX and EDX.
Debug.Assert(dest.Type == OperandType.I64);
Operand eax = Gpr(X86Register.Rax, OperandType.I32);
Operand ebx = Gpr(X86Register.Rbx, OperandType.I32);
Operand ecx = Gpr(X86Register.Rcx, OperandType.I32);
Operand edx = Gpr(X86Register.Rdx, OperandType.I32);
// Value 0x01 = Version, family and feature information.
nodes.AddBefore(node, new Operation(Instruction.Copy, eax, Const(1)));
// Copy results to the destination register.
// The values are split into 2 32-bits registers, we merge them
// into a single 64-bits register.
Operand rcx = Gpr(X86Register.Rcx, OperandType.I64);
node = nodes.AddAfter(node, new Operation(Instruction.ZeroExtend32, dest, edx));
node = nodes.AddAfter(node, new Operation(Instruction.ShiftLeft, dest, dest, Const(32)));
node = nodes.AddAfter(node, new Operation(Instruction.BitwiseOr, dest, dest, rcx));
operation.SetDestinations(new Operand[] { eax, ebx, ecx, edx });
operation.SetSources(new Operand[] { eax });
break;
}
case Instruction.Divide:
case Instruction.DivideUI:
{
// Handle the many restrictions of the division instructions:
// - The dividend is always in RDX:RAX.
// - The result is always in RAX.
// - Additionally it also writes the remainder in RDX.
if (dest.Type.IsInteger())
{
Operand src1 = operation.GetSource(0);
Operand rax = Gpr(X86Register.Rax, src1.Type);
Operand rdx = Gpr(X86Register.Rdx, src1.Type);
nodes.AddBefore(node, new Operation(Instruction.Copy, rax, src1));
nodes.AddBefore(node, new Operation(Instruction.Clobber, rdx));
node = nodes.AddAfter(node, new Operation(Instruction.Copy, dest, rax));
operation.SetDestinations(new Operand[] { rdx, rax });
operation.SetSources(new Operand[] { rdx, rax, operation.GetSource(1) });
operation.Destination = rax;
}
break;
}
case Instruction.Extended:
{
IntrinsicOperation intrinOp = (IntrinsicOperation)operation;
// BLENDVPD, BLENDVPS, PBLENDVB last operand is always implied to be XMM0 when VEX is not supported.
if ((intrinOp.Intrinsic == Intrinsic.X86Blendvpd ||
intrinOp.Intrinsic == Intrinsic.X86Blendvps ||
intrinOp.Intrinsic == Intrinsic.X86Pblendvb) &&
!HardwareCapabilities.SupportsVexEncoding)
{
Operand xmm0 = Xmm(X86Register.Xmm0, OperandType.V128);
nodes.AddBefore(node, new Operation(Instruction.Copy, xmm0, operation.GetSource(2)));
operation.SetSource(2, xmm0);
}
break;
}
case Instruction.Multiply64HighSI:
case Instruction.Multiply64HighUI:
{
// Handle the many restrictions of the i64 * i64 = i128 multiply instructions:
// - The multiplicand is always in RAX.
// - The lower 64-bits of the result is always in RAX.
// - The higher 64-bits of the result is always in RDX.
Operand src1 = operation.GetSource(0);
Operand rax = Gpr(X86Register.Rax, src1.Type);
Operand rdx = Gpr(X86Register.Rdx, src1.Type);
nodes.AddBefore(node, new Operation(Instruction.Copy, rax, src1));
operation.SetSource(0, rax);
node = nodes.AddAfter(node, new Operation(Instruction.Copy, dest, rdx));
operation.SetDestinations(new Operand[] { rdx, rax });
break;
}
case Instruction.RotateRight:
case Instruction.ShiftLeft:
case Instruction.ShiftRightSI:
case Instruction.ShiftRightUI:
{
// The shift register is always implied to be CL (low 8-bits of RCX or ECX).
if (operation.GetSource(1).Kind == OperandKind.LocalVariable)
{
Operand rcx = Gpr(X86Register.Rcx, OperandType.I32);
nodes.AddBefore(node, new Operation(Instruction.Copy, rcx, operation.GetSource(1)));
operation.SetSource(1, rcx);
}
break;
}
}
return(node);
}
