public static void InsertBOM(SldWorks swApp)
{
ModelDoc2 md = (ModelDoc2)swApp.ActiveDoc;
DrawingDoc dd = (DrawingDoc)swApp.ActiveDoc;
ModelDocExtension ex = (ModelDocExtension)md.Extension;
int bom_type = (int)swBomType_e.swBomType_PartsOnly;
int bom_numbering = (int)swNumberingType_e.swNumberingType_Flat;
int bom_anchor = (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft;
SolidWorks.Interop.sldworks.View v = GetFirstView(swApp);
BomTableAnnotation bta = null;
TableAnnotation ta = null;
if (dd.ActivateView(v.Name))
{
bta = v.InsertBomTable4(
false,
Properties.Settings.Default.BOMLocationX, Properties.Settings.Default.BOMLocationY,
bom_anchor,
bom_type,
v.ReferencedConfiguration,
Properties.Settings.Default.BOMTemplatePath,
false,
bom_numbering,
false);
}
if (bta != null)
{
ta = (TableAnnotation)bta;
if (ta != null)
{
int deptcol = 0;
List <int> rowdpt = new List <int>();
System.Text.RegularExpressions.Regex r = new System.Text.RegularExpressions.Regex(BOMFilter[0]);
for (int i = 0; i < ta.ColumnCount; i++)
{
if (ta.Text[0, i].ToUpper() == @"DEPTID")
{
deptcol = i;
break;
}
}
for (int i = 0; i < ta.RowCount; i++)
{
if (!r.IsMatch(ta.Text[i, deptcol]))
{
rowdpt.Add(i);
}
}
foreach (int item in rowdpt)
{
ta.set_RowHidden(item, true);
}
}
}
}
public void InsertBom()
{
SldWorks swApp = default(SldWorks);
ModelDoc2 swModel = default(ModelDoc2);
SelectionMgr swSelMgr = default(SelectionMgr);
FeatureManager swFeatMgr = default(FeatureManager);
SolidWorks.Interop.sldworks.View swView;
BomTableAnnotation swBomAnn = default(BomTableAnnotation);
BomFeature swBomFeat = default(BomFeature);
long anchorType = 0;
long bomType = 0;
string configuration = null;
string tableTemplate = null;
object visible = null;
DrawingDoc swDraw;
Sheet swSheet = default(Sheet);
//swApp = DirectCast(Marshal.GetActiveObject("SldWorks.Application"), SldWorks)
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
swFeatMgr = swModel.FeatureManager;
swDraw = (DrawingDoc)swModel;
swSheet = swDraw.GetCurrentSheet();
swModel.Extension.SetUserPreferenceString((int)swUserPreferenceStringValue_e.swDetailingLayer, (int)swUserPreferenceOption_e.swDetailingBillOfMaterial, "");
//ecли FALSE вставляются все конфигурации
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swOneConfigOnlyTopLevelBom, 0, false);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swBomTableDontAddQTYNextToConfigName, 0, true);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swDontCopyQTYColumnNameFromTemplate, 0, true);
//swDraw.SetUserPreferenceIntegerValue(swBomTableZeroQuantityDisplay, swZeroQuantityBlank);
//Select View
swModel.ClearSelection2(true);
swView = swDraw.GetCurrentSheet().GetViews()[0];
//Insert BOM Table
anchorType = (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft;
bomType = (int)swBomType_e.swBomType_TopLevelOnly;
swModel.ClearSelection2(true);
configuration = "";
tableTemplate = "C:\\Program Files\\SW-Complex\\Template.sldbomtbt";
swBomAnn = swView.InsertBomTable2(false, -0, -0, (int)anchorType, (int)bomType, configuration, tableTemplate);
swFeatMgr.UpdateFeatureTree();
swBomFeat = swBomAnn.BomFeature;
var Names = swBomFeat.GetConfigurations(false, visible);
visible = true;
swBomFeat.SetConfigurations(true, visible, Names);
}
///<summary> method <c>GetDrawingDocBOMTable</c>
///从SolidWorks 的Drawing文档获取到其材料明细表，一般一个文档一个，多余不获取
///</summary>
public void GetDrawingDocBOMTable(ModelDoc2 modelDoc, out BomTableAnnotation swBOMTable, out string configName, out string topFileName)
{
Feature feature = modelDoc.IFirstFeature();
swBOMTable = null;
configName = "";
topFileName = "";
BomFeature swBomFeat = null;
while (feature != null)
{
Type type = feature.GetType();
if ("BomFeat" == feature.GetTypeName())
{
//Console.WriteLine("******************************");
//Console.WriteLine("Feature Name : " + feature.Name);
swBomFeat = (BomFeature)feature.GetSpecificFeature2();
break;
}
string name = feature.Name;
feature = feature.IGetNextFeature();
}
if (swBomFeat == null || swBomFeat.GetTableAnnotationCount() <= 0)
{
return;
}
Feature swFeat = (Feature)swBomFeat.GetFeature();
string featureName = swFeat.Name;
swBOMTable = swBomFeat.IGetTableAnnotations(1);// default(TableAnnotation);
topFileName = swBomFeat.GetReferencedModelName();
int configCount = swBomFeat.GetConfigurationCount(true);
//
//object[] vTableArr = (object[])swBomFeat.GetTableAnnotations();
//foreach (object vTable_loopVariable in vTableArr)
//{
// object vTable = vTable_loopVariable;
// TableAnnotation swTable = (TableAnnotation)vTable;
// ProcessTableAnn(modelDoc, swTable);
//}
configName = "";
if (configCount > 0)
{
bool visibility = true;
configName = swBomFeat.IGetConfigurations(true, 0, ref visibility);
}
//swBOMTable.Iget
return;
}
private static void LerBOM(BomTableAnnotation swBomTable, ModelDoc2 swModel)
{
TableAnnotation tabela = (TableAnnotation)swBomTable;
long coluna = tabela.ColumnCount;
long linha = tabela.RowCount;
listaDeCodigos.Add(Path.GetFileNameWithoutExtension(swModel.GetPathName()) + ";");
for (int i = 0; i < linha - 1; i++)
{
listaDeCodigos.Add((tabela.Text[i, 1] + ";" + tabela.Text[i, 5]));
}
listaDeCodigos.Add(";");
}
private void fill_table(BomFeature bom)
{
found_bom = bom;
string itno = string.Empty;
string ptno = string.Empty;
_cols.Clear();
_prts.Clear();
swTable = (ITableAnnotation)bom.IGetTableAnnotations(1);
part.ClearSelection2(true);
_col_count = swTable.ColumnCount;
find_part_column();
_row_count = swTable.RowCount;
for (int i = 0; i < _col_count; i++)
{
_cols.Add(swTable.get_DisplayedText(0, i));
}
object[] bomtaa = (object[])bom.GetTableAnnotations();
BomTableAnnotation bta = (BomTableAnnotation)bomtaa[0];
int prtcol = get_column_by_name(_part_column);
for (int i = 0; i < _row_count; i++)
{
string prt_ = swTable.get_DisplayedText(i, prtcol);
_prts.Add(prt_);
string[] pathnames = (string[])bta.GetModelPathNames(i, out itno, out ptno);
if (pathnames != null)
{
foreach (string pathname in pathnames)
{
FileInfo fi_ = new FileInfo(pathname);
path_list.Add(fi_);
if (!path_dict.ContainsKey(prt_.ToUpper()))
{
path_dict.Add(prt_.ToUpper(), fi_);
}
}
}
}
initialated = true;
}
///<summary> method <c>GetDrawingDocBOMTable</c>
///从SolidWorks 的Drawing文档获取到其材料明细表，一般一个文档一个，多余不获取
///</summary>
public void GetDrawingDocBOMTable(ModelDoc2 modelDoc, out BomTableAnnotation swBOMTable, out string configName, out string topFileName)
{
Feature feature = modelDoc.IFirstFeature();
swBOMTable = null;
configName = "";
BomFeature swBomFeat = null;
while (feature != null)
{
Type type = feature.GetType();
if ("BomFeat" == feature.GetTypeName())
{
Console.WriteLine("******************************");
Console.WriteLine("Feature Name : " + feature.Name);
swBomFeat = (BomFeature)feature.GetSpecificFeature2();
break;
}
string name = feature.Name;
feature = feature.IGetNextFeature();
}
if (swBomFeat == null || swBomFeat.GetTableAnnotationCount() <= 0)
{
return;
}
swBOMTable = swBomFeat.IGetTableAnnotations(1);// default(TableAnnotation);
topFileName = swBomFeat.GetReferencedModelName();
configName = "";
if (configCount > 0)
{
bool visibility = true;
configName = swBomFeat.IGetConfigurations(true, 0, ref visibility);
}
//swBOMTable.Iget
return;
}
public void ProcessTableAnn(BomTableAnnotation swBOMTableAnn, string ConfigName, SldAsm asmPrd)
{
int nNumRow = 0;
string ItemNumber = null;
string PartNumber = null;
TableAnnotation swTableAnn = (TableAnnotation)swBOMTableAnn;
Console.WriteLine(" Table Title " + swTableAnn.Title);
IEdmVault5 vault = new EdmVault5();
vault.LoginAuto("科德研发部", 0);
if (!vault.IsLoggedIn)
{
Console.WriteLine("登录PDM失败");
return;
}
nNumRow = swTableAnn.RowCount;
swBOMTableAnn = (BomTableAnnotation)swTableAnn;
for (int j = 0; j < swTableAnn.RowCount; j++)
{
//
//for (int i = 0; i < swTableAnn.ColumnCount;i++ )
// Console.WriteLine(swTableAnn.get_Text(j, i));
//获取类别和特有信息
//if (j == swTableAnn.RowCount - 1)//最后一行为标题栏，跳过
// continue;
string filePath = "";
string compName = "";
string compConfig = "";
int compCount = swBOMTableAnn.GetComponentsCount2(j, ConfigName, out ItemNumber, out PartNumber);
for (int i = 0; i < compCount; i++)
{
Component2 comp2 = swBOMTableAnn.IGetComponents2(j, ConfigName, i);
if (comp2 != null)
{
filePath = comp2.GetPathName();
compName = comp2.Name2;
compConfig = comp2.ReferencedConfiguration;
Console.WriteLine(" Component Name :" + comp2.Name2 + " Configuration Name : " + comp2.ReferencedConfiguration);
Console.WriteLine(" Component Path :" + comp2.GetPathName());
}
}
if (filePath == "")
{
continue;
}
SldBsp bsp = GetSldPrdInfoFromFile(vault, filePath);
if (bsp == null)
{
continue;
}
bsp.path = filePath;
//SldBsp bsp = new SldBsp();
swTableAnn.get_Text(j, 0); //序号
bsp.number = swTableAnn.get_Text(j, 1); //代号
bsp.name = swTableAnn.get_Text(j, 2); //名称
string amout = swTableAnn.get_Text(j, 3);
bsp.amout = amout == ""?0:int.Parse(amout); //数量
bsp.material = swTableAnn.get_Text(j, 4); //材料
string weight = swTableAnn.get_Text(j, 5);
bsp.weight = weight == "" ? 0 : int.Parse(weight); //单重
bsp.totalWeight = bsp.weight * bsp.amout; // swTableAnn.get_Text(j, 6);//总重
bsp.remark = swTableAnn.get_Text(j, 7); //备注
string number = swTableAnn.get_Text(j, 8); //测试
if (bsp.number == "")
{
bsp.number = number;
}
if (bsp is SldPrt)
{
asmPrd.sldPrtList.Add((SldPrt)bsp);
}
else if (bsp is SldStd)
{
asmPrd.sldStdList.Add((SldStd)bsp);
}
else if (bsp is SldBuy)
{
asmPrd.sldBuyList.Add((SldBuy)bsp);
}
}
return;
}
/// <summary>
/// Returns Lists of Custom_parts and Standard_Parts
/// </summary>
/// <param name="swModel"></param>
/// <param name="swTableAnn"></param>
/// <param name="ConfigName"></param>
/// <param name="Standard_Parts"></param>
/// <param name="Custom_Parts"></param>
public static void Get_Sorted_Part_Data(ModelDoc2 swModel, BomFeature swBomFeat, List <BOM_Part_Informations> Standard_Parts, List <BOM_Part_Informations> Custom_Parts, string projectpath)
{
try
{
int nNumRow = 0;
int J = 0;
int I = 0;
int numStandard_Part = 1;
int numCustom_Part = 1;
int quantity = 0;
int index_description = 0;
int index_article_number = 0;
int index_supplier = 0;
BOM_Part_Informations part_informations;
string ItemNumber = null;
string PartNumber = null;
// Debug.Print(" Table Title " + swTableAnn.Title);
Feature swFeat = default(Feature);
object[] vTableArr = null;
object vTable = null;
string[] vConfigArray = null;
object vConfig = null;
string ConfigName = null;
string partconfig = null;
TableAnnotation swTable = default(TableAnnotation);
Annotation swAnnotation = default(Annotation);
object visibility = null;
swFeat = swBomFeat.GetFeature();
vTableArr = (object[])swBomFeat.GetTableAnnotations();
foreach (TableAnnotation vTable_loopVariable in vTableArr)
{
vTable = vTable_loopVariable;
swTable = (TableAnnotation)vTable;
vConfigArray = (string[])swBomFeat.GetConfigurations(true, ref visibility);
foreach (object vConfig_loopVariable in vConfigArray)
{
vConfig = vConfig_loopVariable;
ConfigName = (string)vConfig;
// MessageBox.Show(ConfigName);
// swTable.SaveAsPDF(@"C:\Users\alex\Desktop\test.pdf");
nNumRow = swTable.RowCount;
BomTableAnnotation swBOMTableAnn = default(BomTableAnnotation);
swBOMTableAnn = (BomTableAnnotation)swTable;
//swTable.GetColumnTitle
for (int h = 0; h < swTable.ColumnCount; h++)
{
switch (swTable.GetColumnTitle(h))
{
case "Benennung":
index_description = h;
break;
case "Artikelnummer":
index_article_number = h;
break;
case "Lieferant":
index_supplier = h;
break;
default:
break;
}
}
if (index_supplier != 0 || index_supplier != 0 || index_article_number != 0) //Standard BOM Template
{
for (int n = 0; n <= nNumRow - 1; n++)
{
// Debug.Print(" Row Number " + J + " Component Count : " + swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber));
// Debug.Print(" Item Number : " + ItemNumber);
// Debug.Print(" Part Number : " + PartNumber);
// MessageBox.Show("bubu");
object[] vPtArr = null;
Component2 swComp = null;
object pt = null;
quantity = swBOMTableAnn.GetComponentsCount2(n, ConfigName, out ItemNumber, out PartNumber);
vPtArr = (object[])swBOMTableAnn.GetComponents2(n, ConfigName);
if (((vPtArr != null)))
{
for (I = 0; I <= vPtArr.GetUpperBound(0); I++)
{
pt = vPtArr[I];
swComp = (Component2)pt;
if ((swComp != null))
{
part_informations = new BOM_Part_Informations();
part_informations.manufacturer = swTable.get_Text(n, index_supplier);
part_informations.order_number = swTable.get_Text(n, index_article_number);
part_informations.IsAssembly = false;
part_informations.part_number = PartNumber.TrimStart();
part_informations.quantity = quantity.ToString();
//Custom part
if (swComp.GetPathName().Contains(projectpath))
{
if (swComp.GetPathName().Contains(".sldasm") || swComp.GetPathName().Contains(".SLDASM"))
{
// MessageBox.Show(swComp.GetPathName());
part_informations.IsAssembly = true;
}
part_informations.description = swComp.ReferencedConfiguration;
part_informations.item_number = numCustom_Part.ToString();
numCustom_Part++;
Custom_Parts.Add(part_informations);
break;
}
part_informations.description = swTable.get_Text(n, index_description);
part_informations.item_number = numStandard_Part.ToString();
numStandard_Part++;
Standard_Parts.Add(part_informations);
break;
}
else
{
Debug.Print(" Could not get component.");
}
}
}
}
}
else //No Standard BOM Template
{
for (J = 0; J <= nNumRow - 1; J++)
{
// Debug.Print(" Row Number " + J + " Component Count : " + swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber));
// Debug.Print(" Item Number : " + ItemNumber);
// Debug.Print(" Part Number : " + PartNumber);
object[] vPtArr = null;
Component2 swComp = null;
object pt = null;
quantity = swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber);
vPtArr = (object[])swBOMTableAnn.GetComponents2(J, ConfigName);
if (((vPtArr != null)))
{
for (I = 0; I <= vPtArr.GetUpperBound(0); I++)
{
pt = vPtArr[I];
swComp = (Component2)pt;
if ((swComp != null))
{
part_informations = new BOM_Part_Informations();
part_informations.description = swComp.ReferencedConfiguration;
part_informations.part_number = PartNumber;
part_informations.quantity = quantity.ToString();
//Custom part
if (swComp.GetPathName().Contains(projectpath))
{
if (swComp.GetPathName().Contains(".sldasm") || swComp.GetPathName().Contains(".SLDASM"))
{
break;
}
else
{
part_informations.item_number = numCustom_Part.ToString();
numCustom_Part++;
Custom_Parts.Add(part_informations);
break;
}
}
part_informations.item_number = numStandard_Part.ToString();
numStandard_Part++;
Standard_Parts.Add(part_informations);
break;
}
else
{
Debug.Print(" Could not get component.");
}
}
}
}
}
break;
}
}
swAnnotation = swTable.GetAnnotation();
swAnnotation.Select3(false, null);
swModel.EditDelete();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + ex.StackTrace);
}
}
static void Main(string[] args)
{
SldWorks.SldWorks swApp;
ModelDoc2 swModel;
swApp = SW.Get_swApp();
//swApp.SendMsgToUser("teste conectado!");
IEnumerable <int> codigos = Enumerable.Range(4020001, 256);
string fullPath;
try
{
foreach (var codigo in codigos)
{
int erro = 0, aviso = 0;
fullPath = $@"C:\ELETROFRIO\ENGENHARIA SMR\PRODUTOS FINAIS ELETROFRIO\MECÂNICA\RACK PADRAO\RACK PADRAO TESTE\{codigo}.SLDDRW";
//swApp.DocumentVisible(false, (int)swDocumentTypes_e.swDocDRAWING);
swModel = swApp.OpenDoc6(fullPath, (int)swDocumentTypes_e.swDocDRAWING, (int)swOpenDocOptions_e.swOpenDocOptions_RapidDraft, "", erro, aviso);
if (swModel == null)
{
Console.WriteLine("Erro: " + erro);
Console.WriteLine("Aviso: " + aviso);
continue;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
View swActiveView;
View swSheetView;
//A first view é a folha, e não a vista propriamente dita
swSheetView = swDraw.GetFirstView();
swActiveView = swSheetView.GetNextView();
var nomeDaVista = swActiveView.GetName2();
//ModelDoc2 swModelDaVista;
//swModelDaVista = swActiveView.ReferencedDocument;
//var nomeDo3DdaVista = swModelDaVista.GetPathName();
//Object[] anotacoesDaVista = swActiveView.GetAnnotations();
//foreach (var a in anotacoesDaVista)
//{
// Annotation annot = (Annotation)a;
// Console.WriteLine(annot.GetName());
//}
BomFeature swBomFeature;
swBomFeature = GetBOM(swModel);
Feature swFeat;
swFeat = swBomFeature.GetFeature();
object[] vTableArr = swBomFeature.GetTableAnnotations();
BomTableAnnotation tableAnn = null;
foreach (BomTableAnnotation v in vTableArr)
{
tableAnn = (BomTableAnnotation)v;
}
if (tableAnn != null)
{
LerBOM(tableAnn, swModel);
}
else
{
Console.WriteLine("Não pegou a table annotation");
}
EscreveTXT(listaDeCodigos);
swApp.CloseAllDocuments(true);
Console.WriteLine(codigo);
}
}
finally
{
EscreveTXT(listaDeCodigos);
}
Console.ReadLine();
}
/// <summary>
/// 出工程图
/// </summary>
/// <param name="dicValues"></param>
/// <param name="prtTemp"></param>
/// <param name="compTemp"></param>
/// <param name="bomPaths"></param>
/// <param name="savePaths">保存路径</param>
/// <param name="newPath">新路径</param>
private void Drawing(List <string> dicValues, string prtTemp, string compTemp, string bomPaths, string savePaths, string newPath)
{
string viewType = string.Empty;
bool isometric = false;
bool bom = false;
string dimesion = string.Empty;
double spaceX = 0.06; //x方向留白区域
double scale = 1; //定义比例初始值
List <double[]> viewBox = new List <double[]>(); //集合存放视图box
List <double[]> viewOrigin = new List <double[]>(); //集合存放视图原点值
double[] outLine = new double[4]; //视图box值
double[] postion = new double[2]; //视图原点值
_swApp = (SldWorks)ConnectSW.iSwApp; //连接sw
if (_swApp == null)
{
return;
}
foreach (string item in dicValues)
{
int errors = 0;
int warnings = 0;
double view1X = 0;
double view1Y = 0;
string filePath = item; //文件路径
string fileEx = filePath.Substring(filePath.LastIndexOf("."), 7); //获得后缀名
string filename = filePath.Substring(filePath.LastIndexOf("\\") + 1, filePath.LastIndexOf(".") - filePath.LastIndexOf("\\") - 1);
if (fileEx == ".SLDPRT")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, prtTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
if (fileEx == ".SLDASM")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, compTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
_swModelEx = (ModelDocExtension)_swModelDoc.Extension;
if (newPath != null)
{
savePaths = newPath.Substring(0, newPath.LastIndexOf("\\"));
}
//新建工程图
_swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swAutomaticScaling3ViewDrawings, true); //自动缩放新工程图比例
if (standarView == false && isometric) //如果只生成等轴测视图
{
CreatIsometric(__swDrawDoc, filePath);
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
ChangeViewShow(tag, _swView);
_swApp.CloseDoc(_swModelDoc.GetTitle());//
ModelDoc2 tempDoc = (ModelDoc2)__swDrawDoc;
bool ss0 = false;
if (newPath != null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(newPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
bool isHidden = tempDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swApp.CloseDoc(tempDoc.GetTitle());
_numSucess += 1; //转换成功的数量
sucessFile.Add(filePath);
return;
}
bool isCreate = false;
#region 第三视角投影
if (thirProject)
{
isCreate = __swDrawDoc.Create3rdAngleViews2(filePath);//创建第三视角投影视图(视图位置有差别)
//调整视图位置
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
//调整视图1、2位置
if (viewBox[0][3] > viewBox[0][2])//纵向
{
double[] posView1 = new double[] { viewBox[0][2] / 3.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 1.9 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
else
{
double[] posView1 = new double[] { viewBox[0][2] / 4.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 2.0 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
viewOrigin.Clear();
viewBox.Clear();
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
if (isometric)//等轴测
{
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[3][0], viewOrigin[2][1], 0);
_swView = __swDrawDoc.GetFirstView();
double[] sca = new double[2];
sca = _swView.ScaleRatio;//获取比例
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = sca;
double[] rePos = new double[] { viewOrigin[3][0] + 0.015, viewOrigin[2][1] };
_swView.Position = rePos;
ChangeViewShow(tag, _swView); //视图样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //尺寸标注
}
}
#endregion
#region 第一视角投影
else
{
isCreate = __swDrawDoc.Create1stAngleViews(filePath);//创建第一视角投影视图
//获取视图boundingbox
_swView = __swDrawDoc.GetFirstView();
while ((_swView != null))
{
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
viewBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
double newScale = CalcuScale(viewBox, __swDrawDoc, scale, spaceX, 3);
//调整视图位置（position）
if (viewBox[0][3] > viewBox[0][2])
{
view1X = viewBox[0][2] / 2.8; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.85; //视图1的Y坐标放在图纸坐标的五分之一处
}
else
{
view1X = viewBox[0][2] / 3.5; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.0; //视图1的Y坐标放在图纸坐标的四分之一处
}
double[] view1Pos = new double[] { view1X, view1Y };
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
_swView.Position = view1Pos;
bool isRebuild = _swModelDoc.EditRebuild3();
//viewBox.Clear();
List <double[]> tempBox = new List <double[]>();
viewOrigin.Clear();
while ((_swView != null))
{
ChangeViewShow(tag, _swView); //改变视图显示样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //添加尺寸
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
tempBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
if (isometric) //是否创建等轴测视图（非钣金）
{
double[] scalArry = new double[2];
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[2][0], viewOrigin[1][1], 0);
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
double sca = _swView.get_IScaleRatio();
if (sca == 1) //缩小比例
{
scalArry[0] = 1;
scalArry[1] = newScale;
}
else
{
scalArry[0] = sca;
scalArry[1] = 1;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = scalArry;//调整轴测图比例
ChangeViewShow(tag, _swView);
_swModelDoc.EditRebuild3();
}
////关掉文件（不保存）
//_swApp.CloseDoc(_swModelDoc.GetTitle());
if (fileEx == ".SLDASM" && bom) //是否创建明细表
{
//viewBox.Clear();
//viewOrigin.Clear();
double[] outArry = new double[4];
double[] posArry = new double[2];
double[] posArry1 = null;
double[] posArry2 = null;
double[] posArry3 = null;
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
swBomTableAnno = (BomTableAnnotation)_swView.InsertBomTable4(true, 0.4, 0.1, (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_BottomRight, (int)swBomType_e.swBomType_TopLevelOnly, "", bomPaths, false, 0, false);
TableAnnotation tableAnnotation = (TableAnnotation)swBomTableAnno;
tableAnnotation.GetAnnotation();
BomFeature bomFeature = swBomTableAnno.BomFeature;
bool[] array = new bool[bomFeature.GetConfigurationCount(false)];
object Visible = array;
object configurations = bomFeature.GetConfigurations(false, ref Visible);
array[0] = true;
bomFeature.SetConfigurations(true, array, configurations);
FeatureManager featureManager = _swModelDoc.FeatureManager;
featureManager.UpdateFeatureTree();
double num = 0.007;
tableAnnotation.SetRowHeight(-2, num, 0);
double totleHeight = num * tableAnnotation.RowCount; //计算总的tableBom高度
double heightSum = totleHeight + 0.070; //加上标题栏总高度
int columCount = tableAnnotation.ColumnCount; //获取总的列数
double columWidth = 0;
for (int i = 0; i < columCount; i++)
{
double wid = tableAnnotation.GetColumnWidth(i);
columWidth += wid;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
outArry = (double[])_swView.GetOutline();
if (outArry[1] < heightSum)//有可能被遮挡
{
//__swView = _swDrawDoc.GetFirstView();
//double[] tempArry = new double[] { };
//tempArry=(double[])__swView.GetOutline();
//viewBox.Insert(0, tempArry);
scale = ((viewBox[1][2] - viewBox[1][0]) + (viewBox[3][2] - viewBox[3][0])) / (viewBox[0][2] - columWidth - 0.025);//计算X方向的比例
if (scale > 11)
{
double scaleCeil = System.Math.Ceiling(scale);
if (scaleCeil > 11 && scaleCeil < 16)
{
scale = 20;
}
if (scaleCeil > 15 && scaleCeil < 21)
{
scale = 25;
}
if (scaleCeil > 20 && scaleCeil < 26)
{
scale = 30;
}
if (scaleCeil > 25 && scaleCeil < 34)
{
scale = 40;
}
if (scaleCeil > 33 && scaleCeil < 45)
{
scale = 50;
}
if (scaleCeil > 44 && scaleCeil < 55)
{
scale = 60;
}
}
else if (scale > 5.8 && scale < 10.5)
{
double scaleCeil = System.Math.Ceiling(scale);
//scale = scaleCeil + 4.0; //比例为10、11、12、13、14、15
if (scaleCeil > 5 && scaleCeil < 8)
{
scale = 10;
}
if (scaleCeil > 7 && scaleCeil < 12)
{
scale = 15;
}
}
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
bool isScale = _currentSheet.SetScale(1, scale, false, false); //设置视图和图纸比例
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView(); //获取视图1
double[] pos1 = new double[2];
pos1 = _swView.Position;
posArry1 = new double[] { pos1[0] - columWidth / 3.45, pos1[1] };
_swView.Position = posArry1; //重置视图1的位置
_swView = _swView.GetNextView(); //获取视图2
double[] pos2 = new double[2];
pos2 = _swView.Position;
posArry2 = new double[] { pos2[0] - columWidth / 3.45, pos2[1] + 0.0015 };
_swView.Position = posArry2; //设置视图2位置
_swView = _swView.GetNextView(); //获取视图三
posArry = (double[])_swView.Position;
posArry3 = new double[] { posArry[0] - columWidth / 3.5, posArry[1] };
_swView.Position = posArry3;//视图3坐标
}
}
}//第一视角投影
#endregion
if (isCreate)
{
_numSucess += 1;//转换成功的数量
sucessFile.Add(filePath);
}
ModelDoc2 tempModelDoc = (ModelDoc2)__swDrawDoc; //获取到swDraw的父级（ModelDoc）
_swApp.CloseDoc(_swModelDoc.GetTitle());
bool isHiden = tempModelDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swModelDoc.ForceRebuild3(false);
string saveName = (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf("."));
bool ss;
if (newPath != null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
_swApp.CloseDoc(tempModelDoc.GetTitle());//关闭转换完成的文件
}
}
public BomItemExtractor(BomTableAnnotation bom)
{
this.bom = bom;
columnIndices = new BomColumnIndices();
}
public void ProcessTableAnn(IEdmVault5 poVault, BomTableAnnotation swBOMTableAnn, string ConfigName, SldAsm asmPrd)
{
int nNumRow = 0;
string ItemNumber = null;
string PartNumber = null;
TableAnnotation swTableAnn = (TableAnnotation)swBOMTableAnn;
nNumRow = swTableAnn.RowCount;
swBOMTableAnn = (BomTableAnnotation)swTableAnn;
for (int j = 0; j < swTableAnn.RowCount; j++)
{
//
//for (int i = 0; i < swTableAnn.ColumnCount;i++ )
// Console.WriteLine(swTableAnn.get_Text(j, i));
//获取类别和特有信息
if (j == swTableAnn.RowCount - 1)//最后一行为标题栏，跳过
{
continue;
}
string filePath = "";
string compName = "";
string compConfig = "";
int compCount = swBOMTableAnn.GetComponentsCount2(j, ConfigName, out ItemNumber, out PartNumber);
object[] vPtArr = swBOMTableAnn.GetComponents2(j, ConfigName);
if (vPtArr != null)
{
for (int prIndex = 0; prIndex <= vPtArr.GetUpperBound(0); prIndex++)
{
Component2 swComp = (Component2)vPtArr[prIndex];
if ((swComp != null))
{
//Debug.Print(" Component Name :" + swComp.Name2 + " Configuration Name : " + swComp.ReferencedConfiguration);
//Debug.Print(" Component Path :" + swComp.GetPathName());
filePath = swComp.GetPathName();
compName = swComp.Name2;
compConfig = swComp.ReferencedConfiguration;
break;
}
else
{
continue;
}
}
//Component2 comp2 = null;
//comp2 = swBOMTableAnn.IGetComponents2(j, ConfigName, 0);
//if (comp2 != null)
//{
// filePath = comp2.GetPathName();
// compName = comp2.Name2;
// compConfig = comp2.ReferencedConfiguration;
//}
}
SldBsp bsp = null;
if (filePath == "")
{
errors++;
errorStr += "明细表第" + (j + 1) + "行" + swTableAnn.get_Text(j, 1) + " 未找到关联文件\n";
bsp = new SldBsp();
bsp.type = 5;
}
else
{
bsp = GetSldPrdInfoFromFile(poVault, filePath);
if (bsp == null)
{
errors++;
errorStr += "明细表第" + (j + 1) + "行" + swTableAnn.get_Text(j, 1) + " 文件：" + filePath + " 在PDM中未找到\n";
bsp = new SldBsp();
bsp.type = 5;
}
}
bsp.path = filePath;
//SldBsp bsp = new SldBsp();
swTableAnn.get_Text(j, 0); //序号
bsp.number = swTableAnn.get_Text(j, 1); //代号
bsp.name = swTableAnn.get_Text(j, 2); //名称
string amout = swTableAnn.get_Text(j, 3);
int parseInt = 0;
try
{
parseInt = int.Parse(amout);
}catch (Exception) {
parseInt = 0;
}
bsp.amout = parseInt; //数量
bsp.material = swTableAnn.get_Text(j, 4); //材料
string weight = swTableAnn.get_Text(j, 5);
double parseDouble = 0.0;
try
{
parseDouble = double.Parse(weight);
}
catch (Exception)
{
parseDouble = 0.0;
}
bsp.weight = parseDouble; //单重
bsp.totalWeight = bsp.weight * bsp.amout; // swTableAnn.get_Text(j, 6);//总重
bsp.remark = swTableAnn.get_Text(j, 7); //备注
//string number = swTableAnn.get_Text(j, 8);//测试
//if (bsp.number == "") bsp.number = number;
if (bsp is SldPrt)
{
bsp.materialNumber = bsp.number == ""?"":("03." + bsp.number);
asmPrd.sldPrtList.Add((SldPrt)bsp);
}
else if (bsp is SldStd)
{
asmPrd.sldStdList.Add((SldStd)bsp);
}
else if (bsp is SldBuy)
{
asmPrd.sldBuyList.Add((SldBuy)bsp);
}
else if (bsp is SldBsp)
{
asmPrd.sldBspList.Add(bsp);
}
}
return;
}
public bool exportExcel(IEdmVault5 poVault, string selectFile, string saveFile)
{
WiseUtil wiseUtil = new WiseUtil();
IEdmFolder5 templateExcelFolder = null;
string finalFilePath = poVault.RootFolderPath + WiseUtil.templateExcelFilePath;
IEdmFile5 templateExcelFile = poVault.GetFileFromPath(finalFilePath, out templateExcelFolder);
if (templateExcelFile == null)
{
System.Windows.Forms.MessageBox.Show("在PDM中找不到模板EXCEL：\n" + finalFilePath);
return(false);
}
//string installLocation = wiseUtil.GetLocalMachineRegistryValue("SOFTWARE\\solidworks\\Applications\\PDMWorks Enterprise\\", "Location");
//System.Console.WriteLine(installLocation);
//if (installLocation == "")
//{
// installLocation = "C:\\";
//}
//string excelTemplate = installLocation + "ExportTemplate\\template-list.xlsx";
Workbook templateWb = null;
try {
templateWb = wiseUtil.OpenExcel(finalFilePath);
}
catch (Exception e) {
System.Windows.Forms.MessageBox.Show("打开模板表格失败，请查看位置" + templateExcelFile + "的文件状态");
return(false);
}
if (templateWb == null)
{
System.Windows.Forms.MessageBox.Show("打开模板表格失败");
return(false);
}
SldWorks.SldWorks swApp = new SldWorks.SldWorks();
int longstatus = 0;
int longwarnings = 0;
ModelDoc2 modelDoc = swApp.OpenDoc6(selectFile, (int)swDocumentTypes_e.swDocDRAWING,
(int)(swOpenDocOptions_e.swOpenDocOptions_ReadOnly | swOpenDocOptions_e.swOpenDocOptions_Silent),
"", ref longstatus, ref longwarnings);
if (modelDoc == null || longstatus > 0)
{
System.Windows.Forms.MessageBox.Show("打开二维图失败");
swApp.ExitApp();
templateWb.Close();
return(false);
}
BomTableAnnotation bomTableAnno = null;
string configName = "";
string topFileName = "";
try
{
wiseUtil.GetDrawingDocBOMTable(modelDoc, out bomTableAnno, out configName, out topFileName);
}
catch (Exception e)
{
System.Windows.Forms.MessageBox.Show("获取明细表信息出错" + e.StackTrace);
}
if (bomTableAnno == null)
{
System.Windows.Forms.MessageBox.Show("未找到明细表信息");
swApp.ExitApp();
templateWb.Close();
return(false);
}
//modelDoc.Close();
SldAsm asmPrd = wiseUtil.GetAsmIndoFromFile(poVault, topFileName);// new SldAsm();
if (asmPrd == null)
{
System.Windows.Forms.MessageBox.Show("获取材料明细表关联产品失败");
swApp.ExitApp();
templateWb.Close();
return(false);
}
//asmPrd.bzr = "hou";
//asmPrd.bzsj = "2016/1/1";
try
{
wiseUtil.ProcessTableAnn(poVault, bomTableAnno, configName, asmPrd);
}
catch (Exception e)
{
System.Windows.Forms.MessageBox.Show("解析明细表信息出错" + e.StackTrace);
}
//if (WiseUtil.errors > 0)
//{
// System.Windows.Forms.MessageBox.Show("解析明细表信息出错" + WiseUtil.errorStr);
//}
wiseUtil.SaveBuyToWorkbook(templateWb, asmPrd);
wiseUtil.SaveStdToWorkbook(templateWb, asmPrd);
wiseUtil.SavePrtToWorkbook(templateWb, asmPrd);
wiseUtil.SaveBspToWorkbook(templateWb, asmPrd);
templateWb.SaveAs(saveFile);
templateWb.Close();
swApp.ExitApp();
swApp = null;
return(true);
}
