protected override void OnClick()
{
if (AdvancedModeEnabled)
{
// Stop forcing advanced mode on, and sync the thresholds so we exit advanced mode.
ForcedOn = false;
foreach (Tuple <int, SMX.SMXConfig> activePad in ActivePad.ActivePads())
{
int pad = activePad.Item1;
SMX.SMXConfig config = activePad.Item2;
ConfigPresets.SyncUnifiedThresholds(ref config);
SMX.SMX.SetConfig(pad, config);
}
CurrentSMXDevice.singleton.FireConfigurationChanged(this);
}
else
{
// Enable advanced mode.
ForcedOn = true;
}
// Refresh the UI.
LoadUIFromConfig(ActivePad.GetFirstActivePadConfig());
}
protected override void OnClick()
{
if (AdvancedModeEnabled)
{
// Stop forcing advanced mode on, and sync the thresholds so we exit advanced mode.
ForcedOn = false;
for (int pad = 0; pad < 2; ++pad)
{
SMX.SMXConfig config;
if (!SMX.SMX.GetConfig(pad, out config))
{
continue;
}
ConfigPresets.SyncUnifiedThresholds(ref config);
SMX.SMX.SetConfig(pad, config);
}
CurrentSMXDevice.singleton.FireConfigurationChanged(this);
}
else
{
// Enable advanced mode.
ForcedOn = true;
}
// Refresh the UI.
LoadFromConfigDelegateArgs args = CurrentSMXDevice.singleton.GetState();
LoadUIFromConfig(args.controller[args.FirstController].config);
}
private void Select()
{
foreach (Tuple <int, SMX.SMXConfig> activePad in ActivePad.ActivePads())
{
int pad = activePad.Item1;
SMX.SMXConfig config = activePad.Item2;
ConfigPresets.SetPreset(Type, ref config);
SMX.SMX.SetConfig(pad, config);
}
CurrentSMXDevice.singleton.FireConfigurationChanged(this);
}
public override void OnApplyTemplate()
{
base.OnApplyTemplate();
Button button = GetTemplateChild("PART_Button") as Button;
button.Click += delegate(object sender, RoutedEventArgs e) { Select(); };
onConfigChange = new OnConfigChange(this, delegate(LoadFromConfigDelegateArgs args) {
string CurrentPreset = ConfigPresets.GetPreset(args.controller[args.FirstController].config);
Selected = CurrentPreset == Type;
});
}
private void Select()
{
foreach (Tuple <int, SMX.SMXConfig> activePad in ActivePad.ActivePads())
{
int pad = activePad.Item1;
SMX.SMXConfig config = activePad.Item2;
ConfigPresets.SetPreset(Type, ref config);
Console.WriteLine("PresetButton::Select (" + Type + "): " +
config.panelThreshold1Low + ", " + config.panelThreshold4Low + ", " + config.panelThreshold7Low + ", " + config.panelThreshold2Low);
SMX.SMX.SetConfig(pad, config);
}
CurrentSMXDevice.singleton.FireConfigurationChanged(this);
}
private void Select()
{
for (int pad = 0; pad < 2; ++pad)
{
SMX.SMXConfig config;
if (!SMX.SMX.GetConfig(pad, out config))
{
continue;
}
ConfigPresets.SetPreset(Type, ref config);
Console.WriteLine("PresetButton::Select (" + Type + "): " +
config.panelThreshold1Low + ", " + config.panelThreshold4Low + ", " + config.panelThreshold7Low + ", " + config.panelThreshold2Low);
SMX.SMX.SetConfig(pad, config);
}
CurrentSMXDevice.singleton.FireConfigurationChanged(this);
}
public override void OnApplyTemplate()
{
base.OnApplyTemplate();
Button button = GetTemplateChild("PART_Button") as Button;
button.Click += delegate(object sender, RoutedEventArgs e) { Select(); };
onConfigChange = new OnConfigChange(this, delegate(LoadFromConfigDelegateArgs args) {
foreach (Tuple <int, SMX.SMXConfig> activePad in ActivePad.ActivePads())
{
SMX.SMXConfig config = activePad.Item2;
string CurrentPreset = ConfigPresets.GetPreset(config);
Selected = CurrentPreset == Type;
break;
}
});
}
private void LoadUIFromConfig(SMX.SMXConfig config)
{
// The master version doesn't actually matter, but we use this as a signal that the panels
// have a new enough firmware to support this.
bool SupportsAdvancedMode = config.masterVersion != 0xFF && config.masterVersion >= 2;
Visibility = SupportsAdvancedMode? Visibility.Visible:Visibility.Collapsed;
// If the thresholds are different, force the checkbox on. This way, if you load the application
// with a platform with per-panel thresholds, and change the thresholds to no longer be different,
// advanced mode stays forced on. It'll only turn off if you uncheck the box, or if you exit
// the application with synced thresholds and then restart it.
if (SupportsAdvancedMode && !ConfigPresets.AreUnifiedThresholdsSynced(config))
{
ForcedOn = true;
}
// Enable advanced mode if the master says it's supported, and either the user has checked the
// box to turn it on or the thresholds are different in the current configuration.
AdvancedModeEnabled = SupportsAdvancedMode && ForcedOn;
}
private void SetValueToConfig(ref SMX.SMXConfig config)
{
byte lower = (byte)slider.LowerValue;
byte upper = (byte)slider.UpperValue;
switch (Type)
{
case "up-left": config.panelThreshold0Low = lower; config.panelThreshold0High = upper; break;
case "up": config.panelThreshold1Low = lower; config.panelThreshold1High = upper; break;
case "up-right": config.panelThreshold2Low = lower; config.panelThreshold2High = upper; break;
case "left": config.panelThreshold3Low = lower; config.panelThreshold3High = upper; break;
case "center": config.panelThreshold4Low = lower; config.panelThreshold4High = upper; break;
case "right": config.panelThreshold5Low = lower; config.panelThreshold5High = upper; break;
case "down-left": config.panelThreshold6Low = lower; config.panelThreshold6High = upper; break;
case "down": config.panelThreshold7Low = lower; config.panelThreshold7High = upper; break;
case "down-right": config.panelThreshold8Low = lower; config.panelThreshold8High = upper; break;
case "cardinal": config.panelThreshold7Low = lower; config.panelThreshold7High = upper; break;
case "corner": config.panelThreshold2Low = lower; config.panelThreshold2High = upper; break;
}
// If we're not in advanced mode, sync the cardinal value to each of the panel values.
if (!AdvancedModeEnabled)
{
ConfigPresets.SyncUnifiedThresholds(ref config);
}
}
static private List <PanelAndSensor> GetControlledSensorsForSliderTypeInternal(string Type, bool advancedMode, bool includeOverridden)
{
// inner-sensors and outer-sensors do nothing if their checkbox is disabled. We do this here because we
// need to skip this for the RemoveFromSensorList logic above.
if (!includeOverridden)
{
if (Type == "inner-sensors" && !Properties.Settings.Default.UseInnerSensorThresholds)
{
return(new List <PanelAndSensor>());
}
if (Type == "outer-sensors" && !Properties.Settings.Default.UseOuterSensorThresholds)
{
return(new List <PanelAndSensor>());
}
}
// Special sliders:
if (Type == "custom-sensors")
{
return(GetCustomSensors());
}
if (Type == "inner-sensors")
{
return(GetInnerSensors());
}
if (Type == "outer-sensors")
{
return(GetOuterSensors());
}
List <PanelAndSensor> result = new List <PanelAndSensor>();
// Check if this slider is shown in this mode.
if (advancedMode)
{
// Hide the combo sliders in advanced mode.
if (Type == "cardinal" || Type == "corner")
{
return(result);
}
}
if (!advancedMode)
{
// Only these sliders are shown in normal mode.
if (Type != "up" && Type != "center" && Type != "cardinal" && Type != "corner")
{
return(result);
}
}
// If advanced mode is disabled, save to all panels this slider affects. The down arrow controls
// all four cardinal panels. (If advanced mode is enabled we'll never be a different cardinal
// direction, since those widgets won't exist.) If it's disabled, just write to our own panel.
List <int> saveToPanels = new List <int>();
int ourPanelIdx = panelNameToIndex[Type];
saveToPanels.Add(ourPanelIdx);
if (!advancedMode)
{
saveToPanels.AddRange(ConfigPresets.GetPanelsToSyncUnifiedThresholds(ourPanelIdx));
}
foreach (int panelIdx in saveToPanels)
{
for (int sensor = 0; sensor < 4; ++sensor)
{
result.Add(new PanelAndSensor(panelIdx, sensor));
}
}
return(result);
}
