示例#1
0
        public L_Message(String RAW_Message, House _theHouse, Dictionary <String, IMAXDevice> OutputDeviceList)
        {
            DevicesInThisMessage = new List <IMAXDevice>();

            if (RAW_Message.Length < 2)
            {
                throw new MAXException("Unable to process the RAW Message.");
            }

            if (!RAW_Message.StartsWith("L:"))
            {
                throw new MAXException("Unable to process the RAW Message. Not a L Message.");
            }

            RawMessageDecoded = Base64.Decode(RAW_Message.Remove(0, 2));

            // Tokenize RAW Message
            List <byte[]> Tokenized = TokenizeMessage.Tokenize(RawMessageDecoded);

            foreach (byte[] array in Tokenized)
            {
                StringBuilder sb = new StringBuilder();

                for (int i = 0; i <= 2; i++)
                {
                    sb.Append(array[i]);
                }
                // get data 1 and data 2 out
                // on position 5,6
                byte Data1 = array[4];
                byte Data2 = array[5];

                String binValueData1 = Convert.ToString(Data1, 2);
                binValueData1 = binValueData1.PadLeft(8, '0');
                String binValueData2 = Convert.ToString(Data2, 2);
                binValueData2 = binValueData2.PadLeft(8, '0');

                Int32 Cursor = 7;                       // the current position, skipping ?1,

                String RFAddress = sb.ToString();

                #region look for this RF Adress in the House's device list
                List <IMAXDevice> AllDevices  = _theHouse.GetAllDevices();
                IMAXDevice        foundDevice = null;
                foreach (IMAXDevice _device in AllDevices)
                {
                    if (_device.RFAddress == RFAddress)
                    {
                        if (_device.Type == DeviceTypes.HeatingThermostat)
                        {
                            foundDevice = new HeatingThermostat();
                            foundDevice.AssociatedRoom = _device.AssociatedRoom;
                            foundDevice.Name           = _device.Name;
                            foundDevice.RFAddress      = _device.RFAddress;
                            foundDevice.SerialNumber   = _device.SerialNumber;
                        }
                        if (_device.Type == DeviceTypes.ShutterContact)
                        {
                            foundDevice = new ShutterContact();
                            foundDevice.AssociatedRoom = _device.AssociatedRoom;
                            foundDevice.Name           = _device.Name;
                            foundDevice.RFAddress      = _device.RFAddress;
                            foundDevice.SerialNumber   = _device.SerialNumber;
                        }

                        break;
                    }
                }
                #endregion

                if (foundDevice != null)
                {
                    // remove the device from the house to add it later again...
                    DevicesInThisMessage.Add(foundDevice);

                    #region HeatingThermostat
                    if (foundDevice.Type == DeviceTypes.HeatingThermostat)
                    {
                        HeatingThermostat KnownDevice = (HeatingThermostat)foundDevice;

                        #region get all those flags out of Data1 and Data2

                        #region Valid
                        if (binValueData1[3] == '1')
                        {
                            KnownDevice.Valid = true;
                        }
                        else
                        {
                            KnownDevice.Valid = false;
                        }
                        #endregion

                        #region Error
                        if (binValueData1[4] == '1')
                        {
                            KnownDevice.Error = true;
                        }
                        else
                        {
                            KnownDevice.Error = false;
                        }
                        #endregion

                        #region IsAnswer
                        if (binValueData1[5] == '1')
                        {
                            KnownDevice.IsAnswer = true;
                        }
                        else
                        {
                            KnownDevice.IsAnswer = false;
                        }
                        #endregion

                        #region LowBattery
                        if (binValueData2[0] == '1')
                        {
                            KnownDevice.LowBattery = true;
                        }
                        else
                        {
                            KnownDevice.LowBattery = false;
                        }
                        #endregion

                        #region LinkError
                        if (binValueData2[1] == '1')
                        {
                            KnownDevice.LinkError = true;
                        }
                        else
                        {
                            KnownDevice.LinkError = false;
                        }
                        #endregion

                        #region PanelLock
                        if (binValueData2[2] == '1')
                        {
                            KnownDevice.PanelLock = true;
                        }
                        else
                        {
                            KnownDevice.PanelLock = false;
                        }
                        #endregion

                        #region GatewayOK
                        if (binValueData2[3] == '1')
                        {
                            KnownDevice.GatewayOK = true;
                        }
                        else
                        {
                            KnownDevice.GatewayOK = false;
                        }
                        #endregion

                        #region Mode
                        String ModeValue = binValueData2[6] + "" + binValueData2[7];

                        switch (ModeValue)
                        {
                        case "00":
                            KnownDevice.Mode = ThermostatModes.automatic;
                            break;

                        case "01":
                            KnownDevice.Mode = ThermostatModes.manual;
                            break;

                        case "10":
                            KnownDevice.Mode = ThermostatModes.vacation;
                            break;

                        case "11":
                            KnownDevice.Mode = ThermostatModes.boost;
                            break;

                        default:
                            break;
                        }
                        #endregion

                        #endregion

                        // hurray, we've got a device we know how to handle B-)
                        ((HeatingThermostat)foundDevice).Temperature = array[Cursor] / 2;
                        Cursor++;

                        OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
                    }
                    #endregion

                    #region ShutterContact
                    if (foundDevice.Type == DeviceTypes.ShutterContact)
                    {
                        ShutterContact KnownDevice = (ShutterContact)foundDevice;

                        #region get all those flags out of Data1 and Data2

                        #region Valid
                        if (binValueData1[3] == '1')
                        {
                            KnownDevice.Valid = true;
                        }
                        else
                        {
                            KnownDevice.Valid = false;
                        }
                        #endregion

                        #region Error
                        if (binValueData1[4] == '1')
                        {
                            KnownDevice.Error = true;
                        }
                        else
                        {
                            KnownDevice.Error = false;
                        }
                        #endregion

                        #region IsAnswer
                        if (binValueData1[5] == '1')
                        {
                            KnownDevice.IsAnswer = true;
                        }
                        else
                        {
                            KnownDevice.IsAnswer = false;
                        }
                        #endregion

                        #region LowBattery
                        if (binValueData2[0] == '1')
                        {
                            KnownDevice.LowBattery = true;
                        }
                        else
                        {
                            KnownDevice.LowBattery = false;
                        }
                        #endregion

                        #region LinkError
                        if (binValueData2[1] == '1')
                        {
                            KnownDevice.LinkError = true;
                        }
                        else
                        {
                            KnownDevice.LinkError = false;
                        }
                        #endregion

                        #region PanelLock
                        if (binValueData2[2] == '1')
                        {
                            KnownDevice.PanelLock = true;
                        }
                        else
                        {
                            KnownDevice.PanelLock = false;
                        }
                        #endregion

                        #region GatewayOK
                        if (binValueData2[3] == '1')
                        {
                            KnownDevice.GatewayOK = true;
                        }
                        else
                        {
                            KnownDevice.GatewayOK = false;
                        }
                        #endregion

                        #region Mode
                        String ModeValue = binValueData2[6] + "" + binValueData2[7];

                        switch (ModeValue)
                        {
                        case "00":
                            KnownDevice.ShutterState = ShutterContactModes.closed;
                            break;

                        case "10":
                            KnownDevice.ShutterState = ShutterContactModes.open;
                            break;

                        default:
                            break;
                        }
                        #endregion

                        #endregion

                        OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
                    }
                    #endregion
                }
            }
        }
示例#2
0
        /// <summary>
        /// Inject into an existing get_list_sensors JSON output of an ezcontrol XS1 device
        /// </summary>
        public static String Inject_get_list_sensors(String XS1_get_list_sensor_response, House ELVMAXHouse)
        {
            Int32 id = 0;
            Int32 numberofCharactersToDelete = XS1_get_list_sensor_response.IndexOf('(');

            String Start = XS1_get_list_sensor_response.Remove(numberofCharactersToDelete + 1);

            String Prepared = XS1_get_list_sensor_response.Remove(0, numberofCharactersToDelete + 1);

            Prepared = Prepared.Remove(Prepared.Length - 4, 4);

            List <SensorJSON> activeSensors       = new List <SensorJSON>();
            SensorJSON_Root   deserializedSensors = JsonConvert.DeserializeObject <SensorJSON_Root>(Prepared);
            List <IMAXDevice> devices             = ELVMAXHouse.GetAllDevices();

            // find first zero sensor
            foreach (SensorJSON _sensor in deserializedSensors.sensor)
            {
                if (_sensor.type != "disabled")
                {
                    activeSensors.Add(_sensor);
                }
            }

            id = activeSensors.Count + 1;
            deserializedSensors.sensor = activeSensors;

            foreach (IMAXDevice _device in devices)
            {
                if (_device.Type == DeviceTypes.HeatingThermostat)
                {
                    HeatingThermostat heating = (HeatingThermostat)_device;

                    //heating.Temperature
                    SensorJSON _newsensor = new SensorJSON();

                    if (heating.Temperature == 4.0)
                    {
                        // this heatingthermostat is on "OFF"
                        _newsensor.id = id;
                        id++;
                        _newsensor.name  = heating.Name;
                        _newsensor.type  = "remotecontrol";
                        _newsensor.unit  = "boolean";
                        _newsensor.value = 0.0;
                        _newsensor.utime = heating.LastUpdate.JavaScriptTimestampNonMsec();
                    }
                    else
                    {
                        //this is normal temperature
                        _newsensor.id = id;
                        id++;
                        _newsensor.name  = heating.Name;
                        _newsensor.type  = "temperature";
                        _newsensor.unit  = "°C";
                        _newsensor.value = heating.Temperature;
                        _newsensor.utime = heating.LastUpdate.JavaScriptTimestampNonMsec();
                    }

                    deserializedSensors.sensor.Add(_newsensor);
                }

                if (_device.Type == DeviceTypes.ShutterContact)
                {
                    ShutterContact shutter = (ShutterContact)_device;

                    SensorJSON _newsensor = new SensorJSON();
                    _newsensor.id = id;
                    id++;
                    _newsensor.name  = shutter.Name;
                    _newsensor.type  = "dooropen";
                    _newsensor.unit  = "boolean";
                    _newsensor.utime = shutter.LastUpdate.JavaScriptTimestampNonMsec();

                    if (shutter.ShutterState == ShutterContactModes.open)
                    {
                        _newsensor.value = 1.0;
                    }
                    else
                    {
                        _newsensor.value = 0.0;
                    }

                    deserializedSensors.sensor.Add(_newsensor);
                }
            }

            String SensorJSON = JsonConvert.SerializeObject(deserializedSensors);

            SensorJSON = Start + SensorJSON + ")";

            return(SensorJSON);
        }
示例#3
0
		public L_Message(String RAW_Message, House _theHouse, Dictionary<String,IMAXDevice> OutputDeviceList)
		{
			DevicesInThisMessage = new List<IMAXDevice>();
			
			if (RAW_Message.Length < 2)
				throw new MAXException("Unable to process the RAW Message.");
			
			if (!RAW_Message.StartsWith("L:"))
				throw new MAXException("Unable to process the RAW Message. Not a L Message.");
			
			RawMessageDecoded = Base64.Decode(RAW_Message.Remove(0,2));
			
			// Tokenize RAW Message
			List<byte[]> Tokenized = TokenizeMessage.Tokenize(RawMessageDecoded);
			
			foreach(byte[] array in Tokenized)
			{
				StringBuilder sb = new StringBuilder();
				
				for(int i=0;i<=2;i++)
				{
					sb.Append(array[i]);
				}
				// get data 1 and data 2 out
				// on position 5,6
				byte Data1 = array[4];
				byte Data2 = array[5];
				
				String binValueData1 = Convert.ToString(Data1,2);
				binValueData1 = binValueData1.PadLeft(8, '0');
				String binValueData2 = Convert.ToString(Data2,2);
				binValueData2 = binValueData2.PadLeft(8, '0');
				
				Int32 Cursor = 7;	// the current position, skipping ?1,
				
				String RFAddress = sb.ToString();
				
				#region look for this RF Adress in the House's device list
                List<IMAXDevice> AllDevices = _theHouse.GetAllDevices();
                IMAXDevice foundDevice = null;
				foreach(IMAXDevice _device in AllDevices)
				{
					if (_device.RFAddress == RFAddress)
					{
                        if (_device.Type == DeviceTypes.HeatingThermostat)
                        {
                            foundDevice = new HeatingThermostat();
                            foundDevice.AssociatedRoom = _device.AssociatedRoom;
                            foundDevice.Name = _device.Name;
                            foundDevice.RFAddress = _device.RFAddress;
                            foundDevice.SerialNumber = _device.SerialNumber;
                        }
                        if (_device.Type == DeviceTypes.ShutterContact)
                        {
                            foundDevice = new ShutterContact();
                            foundDevice.AssociatedRoom = _device.AssociatedRoom;
                            foundDevice.Name = _device.Name;
                            foundDevice.RFAddress = _device.RFAddress;
                            foundDevice.SerialNumber = _device.SerialNumber;
                        }

						break;
					}
				}
				#endregion
				
				if (foundDevice != null)
				{
					// remove the device from the house to add it later again...
					DevicesInThisMessage.Add(foundDevice);
					
					#region HeatingThermostat
					if (foundDevice.Type == DeviceTypes.HeatingThermostat)
					{
						HeatingThermostat KnownDevice = (HeatingThermostat)foundDevice;
						
						#region get all those flags out of Data1 and Data2
						
						#region Valid
						if (binValueData1[3] == '1')
							KnownDevice.Valid = true;
						else
							KnownDevice.Valid = false;
						#endregion
						
						#region Error
						if (binValueData1[4] == '1')
							KnownDevice.Error = true;
						else
							KnownDevice.Error = false;
						#endregion
						
						#region IsAnswer
						if (binValueData1[5] == '1')
							KnownDevice.IsAnswer = true;
						else
							KnownDevice.IsAnswer = false;
						#endregion
						
						#region LowBattery
						if (binValueData2[0] == '1')
							KnownDevice.LowBattery = true;
						else
							KnownDevice.LowBattery = false;
						#endregion
						
						#region LinkError
						if (binValueData2[1] == '1')
							KnownDevice.LinkError = true;
						else
							KnownDevice.LinkError = false;
						#endregion
						
						#region PanelLock
						if (binValueData2[2] == '1')
							KnownDevice.PanelLock = true;
						else
							KnownDevice.PanelLock = false;
						#endregion
						
						#region GatewayOK
						if (binValueData2[3] == '1')
							KnownDevice.GatewayOK = true;
						else
							KnownDevice.GatewayOK = false;
						#endregion
						
						#region Mode
						String ModeValue = binValueData2[6]+""+binValueData2[7];
						
						switch(ModeValue)
						{
						case "00":
							KnownDevice.Mode = ThermostatModes.automatic;
							break;
						case "01":
							KnownDevice.Mode = ThermostatModes.manual;
							break;
						case "10":
							KnownDevice.Mode = ThermostatModes.vacation;
							break;
						case "11":
							KnownDevice.Mode = ThermostatModes.boost;
							break;	
						default:
							break;
						}
						#endregion
						
						#endregion
						
						// hurray, we've got a device we know how to handle B-)
						((HeatingThermostat)foundDevice).Temperature = array[Cursor]/2;
						Cursor++;

                        OutputDeviceList.Add(KnownDevice.SerialNumber,KnownDevice);
					}
					#endregion
					
					#region ShutterContact
					if (foundDevice.Type == DeviceTypes.ShutterContact)
					{
						ShutterContact KnownDevice = (ShutterContact)foundDevice;
						
						#region get all those flags out of Data1 and Data2
						
						#region Valid
						if (binValueData1[3] == '1')
							KnownDevice.Valid = true;
						else
							KnownDevice.Valid = false;
						#endregion
						
						#region Error
						if (binValueData1[4] == '1')
							KnownDevice.Error = true;
						else
							KnownDevice.Error = false;
						#endregion
						
						#region IsAnswer
						if (binValueData1[5] == '1')
							KnownDevice.IsAnswer = true;
						else
							KnownDevice.IsAnswer = false;
						#endregion
						
						#region LowBattery
						if (binValueData2[0] == '1')
							KnownDevice.LowBattery = true;
						else
							KnownDevice.LowBattery = false;
						#endregion
						
						#region LinkError
						if (binValueData2[1] == '1')
							KnownDevice.LinkError = true;
						else
							KnownDevice.LinkError = false;
						#endregion
						
						#region PanelLock
						if (binValueData2[2] == '1')
							KnownDevice.PanelLock = true;
						else
							KnownDevice.PanelLock = false;
						#endregion
						
						#region GatewayOK
						if (binValueData2[3] == '1')
							KnownDevice.GatewayOK = true;
						else
							KnownDevice.GatewayOK = false;
						#endregion
						
						#region Mode
						String ModeValue = binValueData2[6]+""+binValueData2[7];
						
						switch(ModeValue)
						{
						case "00":
							KnownDevice.ShutterState = ShutterContactModes.closed;
							break;
						case "10":
							KnownDevice.ShutterState = ShutterContactModes.open;
							break;
						default:
							break;
						}
						#endregion
						
						#endregion

                        OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
					}
					#endregion
				}
			}
		}
示例#4
0
        // initializes this class and processes the given Input Message and fills the Message Fields
        public M_Message(String RAW_Message, House _House)
        {
            thisHouse = _House;
            if (RAW_Message.Length < 2)
            {
                throw new MAXException("Unable to process the RAW Message.");
            }

            if (!RAW_Message.StartsWith("M:"))
            {
                throw new MAXException("Unable to process the RAW Message. Not a M Message.");
            }

            String[] SplittedRAWMessage = RAW_Message.Remove(0, 2).Split(new char[1] {
                ','
            });

            if (SplittedRAWMessage.Length >= 3)
            {
                Index             = Int32.Parse(SplittedRAWMessage[0], System.Globalization.NumberStyles.HexNumber);
                Count             = Int32.Parse(SplittedRAWMessage[1], System.Globalization.NumberStyles.HexNumber);
                RawMessageDecoded = Base64.Decode(SplittedRAWMessage[2]);

//				System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding();
//				Console.WriteLine(enc.GetString (RawMessageDecoded));
//				StringBuilder hexlist = new StringBuilder();
//
//				foreach(Byte _byte in RawMessageDecoded)
//				{
//					hexlist.Append(_byte.ToString()+" ");
//				}

                Int32 Cursor = 2;

                // now go deeper
                Byte RoomCount = RawMessageDecoded[Cursor];
                Cursor++;

                #region Rooms
                // go through every room
                for (byte roomnumber = 1; roomnumber <= RoomCount; roomnumber++)
                {
                    Room newRoom = new Room(thisHouse);

                    newRoom.RoomID = RawMessageDecoded[Cursor];
                    Cursor++;

                    Byte RoomNameLength = RawMessageDecoded[Cursor];
                    Cursor++;

                    byte[] RoomName = new byte[RoomNameLength];

                    for (Byte j = 0; j <= RoomNameLength - 1; j++)
                    {
                        //RoomName.Append((char)RawMessageDecoded[Cursor]);
                        RoomName[j] = RawMessageDecoded[Cursor];
                        Cursor++;
                    }
                    newRoom.RoomName = System.Text.Encoding.UTF8.GetString(RoomName);

                    StringBuilder RFAddress_Buffer = new StringBuilder();
                    for (Byte j = 0; j <= 3 - 1; j++)
                    {
                        RFAddress_Buffer.Append(RawMessageDecoded[Cursor]);
                        Cursor++;
                    }
                    newRoom.RFAddress = RFAddress_Buffer.ToString();                    //Int32.Parse(RFAddress_Buffer.ToString(),System.Globalization.NumberStyles.HexNumber);

                    _House.Rooms.Add(newRoom);
                }

                #region Devices
                //newRoom.RFAddress = Int32.Parse(RFAddress.ToString(),System.Globalization.NumberStyles.HexNumber);
                Byte DeviceCount = RawMessageDecoded[Cursor];
                Cursor++;
                // go through all the devices in here
                for (byte devicenumber = 1; devicenumber <= DeviceCount; devicenumber++)
                {
                    // read in the device
                    IMAXDevice newDevice = new UnknownDevice();

                    #region Determine DeviceType
                    Byte DevType = RawMessageDecoded[Cursor];
                    Cursor++;

                    switch (DevType)
                    {
                    case 1:
                        newDevice = new HeatingThermostat();
                        break;

                    case 2:
                        newDevice = new HeatingThermostatPlus();
                        break;

                    case 3:
                        newDevice = new WallMountedThermostat();
                        break;

                    case 4:
                        newDevice = new ShutterContact();
                        break;

                    case 5:
                        newDevice = new PushButton();
                        break;

                    default:
                        break;
                    }
                    #endregion

                    StringBuilder DeviceRFAddress = new StringBuilder();
                    for (Byte j = 0; j <= 3 - 1; j++)
                    {
                        DeviceRFAddress.Append(RawMessageDecoded[Cursor]);
                        Cursor++;
                    }
                    newDevice.RFAddress = DeviceRFAddress.ToString();                    //Int32.Parse(DeviceRFAddress.ToString(),System.Globalization.NumberStyles.HexNumber);

                    StringBuilder DeviceSerialNumber = new StringBuilder();
                    for (Byte j = 0; j <= 10 - 1; j++)
                    {
                        DeviceSerialNumber.Append((char)RawMessageDecoded[Cursor]);
                        Cursor++;
                    }
                    newDevice.SerialNumber = DeviceSerialNumber.ToString();

                    Byte DeviceNameLength = RawMessageDecoded[Cursor];
                    Cursor++;

                    byte[] DeviceName = new byte[DeviceNameLength];

                    for (Byte j = 0; j <= DeviceNameLength - 1; j++)
                    {
                        DeviceName[j] = RawMessageDecoded[Cursor];
                        Cursor++;
                    }
                    newDevice.Name = System.Text.Encoding.UTF8.GetString(DeviceName);

                    Byte RoomID = RawMessageDecoded[Cursor];
                    Cursor++;

                    // add the device to the room
                    foreach (Room newRoom in _House.Rooms)
                    {
                        if (newRoom.RoomID == RoomID)
                        {
                            newDevice.AssociatedRoom = newRoom;
                            newRoom.Devices.Add(newDevice.SerialNumber, newDevice);
                            break;
                        }
                    }
                }
                #endregion
                // add this Room to the M_Message-Structure
                #endregion
            }
            else
            {
                throw new MAXException("Unable to process M Message. Not enough content.");
            }
        }
示例#5
0
		// initializes this class and processes the given Input Message and fills the Message Fields
		public M_Message (String RAW_Message, House _House)
		{
			thisHouse = _House;
			if (RAW_Message.Length < 2)
				throw new MAXException("Unable to process the RAW Message.");

			if (!RAW_Message.StartsWith("M:"))
				throw new MAXException("Unable to process the RAW Message. Not a M Message.");

			String[] SplittedRAWMessage = RAW_Message.Remove(0,2).Split(new char[1] { ',' });

			if (SplittedRAWMessage.Length >= 3)
			{
				Index = Int32.Parse(SplittedRAWMessage[0],System.Globalization.NumberStyles.HexNumber);
				Count = Int32.Parse(SplittedRAWMessage[1],System.Globalization.NumberStyles.HexNumber);
				RawMessageDecoded = Base64.Decode(SplittedRAWMessage[2]);

//				System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding();
//				Console.WriteLine(enc.GetString (RawMessageDecoded));
//				StringBuilder hexlist = new StringBuilder();
//
//				foreach(Byte _byte in RawMessageDecoded)
//				{
//					hexlist.Append(_byte.ToString()+" ");
//				}

				Int32 Cursor = 2;

				// now go deeper
				Byte RoomCount = RawMessageDecoded[Cursor];
				Cursor++;

				#region Rooms
				// go through every room
				for(byte roomnumber=1;roomnumber<=RoomCount;roomnumber++)
				{
					Room newRoom = new Room(thisHouse);

					newRoom.RoomID = RawMessageDecoded[Cursor];
					Cursor++;

					Byte RoomNameLength = RawMessageDecoded[Cursor];
					Cursor++;

					byte[] RoomName = new byte[RoomNameLength];

					for(Byte j=0;j<=RoomNameLength-1;j++)
					{
						//RoomName.Append((char)RawMessageDecoded[Cursor]);
						RoomName[j] = RawMessageDecoded[Cursor];
						Cursor++;
					}
					newRoom.RoomName = System.Text.Encoding.UTF8.GetString(RoomName);

					StringBuilder RFAddress_Buffer = new StringBuilder();
					for(Byte j=0;j<=3-1;j++)
					{
						RFAddress_Buffer.Append(RawMessageDecoded[Cursor]);
						Cursor++;
					}
					newRoom.RFAddress = RFAddress_Buffer.ToString();//Int32.Parse(RFAddress_Buffer.ToString(),System.Globalization.NumberStyles.HexNumber);

					_House.Rooms.Add(newRoom);
				}

				#region Devices
				//newRoom.RFAddress = Int32.Parse(RFAddress.ToString(),System.Globalization.NumberStyles.HexNumber);
				Byte DeviceCount = RawMessageDecoded[Cursor];
				Cursor++;
				// go through all the devices in here
				for(byte devicenumber=1;devicenumber<=DeviceCount;devicenumber++)
				{
					// read in the device
					IMAXDevice newDevice = new UnknownDevice();

					#region Determine DeviceType
					Byte DevType = RawMessageDecoded[Cursor];
					Cursor++;
					
					switch(DevType)
					{
						case 1: 
							newDevice = new HeatingThermostat();
					        break;
					    case 2:
					        newDevice = new HeatingThermostatPlus();
					        break;
					    case 3:
					        newDevice = new WallMountedThermostat();
					        break;
					    case 4:
					        newDevice = new ShutterContact();
					        break;
					    case 5:
					        newDevice = new PushButton();
					        break;
					    default:
					        break;
					}
					#endregion

					StringBuilder DeviceRFAddress = new StringBuilder();
					for(Byte j=0;j<=3-1;j++)
					{
						DeviceRFAddress.Append(RawMessageDecoded[Cursor]);
						Cursor++;
					}
					newDevice.RFAddress = DeviceRFAddress.ToString();//Int32.Parse(DeviceRFAddress.ToString(),System.Globalization.NumberStyles.HexNumber);

					StringBuilder DeviceSerialNumber = new StringBuilder();
					for(Byte j=0;j<=10-1;j++)
					{
						DeviceSerialNumber.Append((char)RawMessageDecoded[Cursor]);
						Cursor++;
					}
					newDevice.SerialNumber = DeviceSerialNumber.ToString();

					Byte DeviceNameLength = RawMessageDecoded[Cursor];
					Cursor++;

					byte[] DeviceName = new byte[DeviceNameLength];

					for(Byte j=0;j<=DeviceNameLength-1;j++)
					{
						DeviceName[j] = RawMessageDecoded[Cursor];
						Cursor++;
					}
					newDevice.Name = System.Text.Encoding.UTF8.GetString(DeviceName);

					Byte RoomID = RawMessageDecoded[Cursor];
					Cursor++;

					// add the device to the room
					foreach(Room newRoom in _House.Rooms)
					{
						if (newRoom.RoomID == RoomID)
						{
							newDevice.AssociatedRoom = newRoom;
							newRoom.Devices.Add(newDevice.SerialNumber,newDevice);
							break;
						}
					}
				}
				#endregion
				// add this Room to the M_Message-Structure
				#endregion
			}
			else
				throw new MAXException("Unable to process M Message. Not enough content.");

		}
示例#6
0
        // this is the ELV MAX! Cube monitoring script
        public void Run()
        {
            while (running)
            {
                TcpClient     client;
                NetworkStream stream;
                Dictionary <String, IMAXDevice> currentHouse = new Dictionary <string, IMAXDevice>();

                #region Update House
                try
                {
                    // now fill that with the initial handshake data...

                    #region Initial connect and retrieving everything we get from the cube
                    // network connect and first initialization
                    client = new TcpClient();
                    client.Connect(Hostname, Port);
                    stream = client.GetStream();

                    // the read buffer (chosen quite big)
                    byte[]        myReadBuffer = new byte[4096 * 8];
                    List <String> Messages     = new List <string>();

                    // to build the complete message
                    StringBuilder myCompleteMessage = new StringBuilder();
                    int           numberOfBytesRead = 0;

                    MAXEncodeDecode DecoderEncoder = new MAXEncodeDecode();
                    keepRunning = true;
                    // Incoming message may be larger than the buffer size.
                    do
                    {
                        myCompleteMessage  = new StringBuilder();
                        stream.ReadTimeout = 1000;
                        try
                        {
                            numberOfBytesRead = stream.Read(myReadBuffer, 0, myReadBuffer.Length);
                            myCompleteMessage.AppendFormat("{0}", Encoding.ASCII.GetString(myReadBuffer, 0, numberOfBytesRead));

                            Messages.Add(myCompleteMessage.ToString());
                        }
                        catch (Exception)
                        {
                            previousHouse = null;
                            // everything to start
                            theHouse = new House();

                            keepRunning = false;
                        }
                    }while(keepRunning);
                    #endregion

                    ConsoleOutputLogger.WriteLine("ELV MAX Cube connected...");

                    #region preprocess
                    List <String> PreProcessedMessages = new List <string>();
                    foreach (String _Message in Messages)
                    {
                        if (_Message.Remove(_Message.Length - 2).Contains("\r\n"))
                        {
                            String[] PMessages = _Message.Remove(_Message.Length - 2).Split(new char[1] {
                                '\n'
                            }, StringSplitOptions.RemoveEmptyEntries);
                            foreach (String pmessage in PMessages)
                            {
                                PreProcessedMessages.Add(pmessage.Replace("\r", "") + "\r\n");
                            }
                        }
                        else
                        {
                            PreProcessedMessages.Add(_Message);
                        }
                    }
                    #endregion

                    #region process
                    // Analyze and Output Messages, feed them to the decoder
                    foreach (String _Message in PreProcessedMessages)
                    {
                        //IMAXMessage Message = DecoderEncoder.ProcessMessage(_Message.ToString(), theHouse);
                        //							if (Message != null)
                        //							{
                        //								ConsoleOutputLogger.WriteLine(_Message.ToString());
                        //								ConsoleOutputLogger.WriteLine(Message.ToString());
                        //								ConsoleOutputLogger.WriteLine("");
                        //							}

                        DecoderEncoder.ProcessMessage(_Message.ToString(), theHouse);
                    }
                    #endregion

                    while (running)
                    {
                        // when we are here, we got a filled "theHouse" which does contain first hand L message information
                        previousHouse = theHouse.GetAllDevicesInADictionary();

                        #region send L: request and get all the feedback
                        System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding();
                        byte[] args_data_buffer       = enc.GetBytes("l:\r\n");
                        Messages    = new List <string>();
                        keepRunning = true;
                        // Incoming message may be larger than the buffer size.
                        stream.Write(args_data_buffer, 0, args_data_buffer.Length);
                        do
                        {
                            myCompleteMessage  = new StringBuilder();
                            stream.ReadTimeout = 1000;
                            try
                            {
                                numberOfBytesRead = stream.Read(myReadBuffer, 0, myReadBuffer.Length);
                                myCompleteMessage.AppendFormat("{0}", Encoding.ASCII.GetString(myReadBuffer, 0, numberOfBytesRead));

                                Messages.Add(myCompleteMessage.ToString());
                            }
                            catch (Exception)
                            {
                                keepRunning = false;
                            }
                        }while(keepRunning);
                        #endregion

                        #region preprocess
                        PreProcessedMessages = new List <string>();
                        foreach (String _Message in Messages)
                        {
                            if (_Message.Remove(_Message.Length - 2).Contains("\r\n"))
                            {
                                String[] PMessages = _Message.Remove(_Message.Length - 2).Split(new char[1] {
                                    '\n'
                                }, StringSplitOptions.RemoveEmptyEntries);
                                foreach (String pmessage in PMessages)
                                {
                                    PreProcessedMessages.Add(pmessage.Replace("\r", "") + "\r\n");
                                }
                            }
                            else
                            {
                                PreProcessedMessages.Add(_Message);
                            }
                        }
                        #endregion

                        #region process
                        // Analyze and Output Messages, feed them to the decoder
                        foreach (String _Message in PreProcessedMessages)
                        {
                            //IMAXMessage Message = DecoderEncoder.ProcessMessage(_Message.ToString(), theHouse);
                            //							if (Message != null)
                            //							{
                            //								ConsoleOutputLogger.WriteLine(_Message.ToString());
                            //								ConsoleOutputLogger.WriteLine(Message.ToString());
                            //								ConsoleOutputLogger.WriteLine("");
                            //							}
                            currentHouse = new Dictionary <string, IMAXDevice>();
                            DecoderEncoder.ProcessLMessage(_Message.ToString(), theHouse, currentHouse);
                        }
                        #endregion

                        #region Diff the house
                        if (previousHouse != null)
                        {
                            // only if we already got two houses in here...
                            List <IDeviceDiffSet> differences = DiffHouse.CalculateDifferences(previousHouse, currentHouse);
                            if (differences.Count != 0)
                            {
                                #region enqueue the difference-sets into the data queue
                                foreach (IDeviceDiffSet _difference in differences)
                                {
                                    iQueue.Enqueue(_difference);
                                }
                                #endregion
                            }
                        }
                        #endregion
                        theHouse.UpdateDevices(currentHouse);

                        // update appropriate devices and in given intervals output non updated
                        TimeSpan _lastUpdate = DateTime.Now - LastReStoring;

                        // auto-update every n ... minutes
                        if (_lastUpdate.TotalSeconds > Properties.Settings.Default.ELVMAXSensorReStoringSec)
                        {
                            LastReStoring = DateTime.Now;

                            foreach (IMAXDevice _device in currentHouse.Values)
                            {
                                #region Heating Thermostat
                                if (_device.Type == DeviceTypes.HeatingThermostat)
                                {
                                    HeatingThermostat     _heating   = (HeatingThermostat)_device;
                                    HeatingThermostatDiff _queueable = new HeatingThermostatDiff(_device.Name, _device.AssociatedRoom.RoomID, _device.AssociatedRoom.RoomName);

                                    if (_heating.LowBattery)
                                    {
                                        _queueable.LowBattery = BatteryStatus.lowbattery;
                                    }
                                    else
                                    {
                                        _queueable.LowBattery = BatteryStatus.ok;
                                    }

                                    _queueable.Mode        = _heating.Mode;
                                    _queueable.Temperature = _heating.Temperature;

                                    if (_queueable.Temperature != 0)
                                    {
                                        iQueue.Enqueue(_queueable);
                                    }
                                }
                                #endregion

                                #region ShutterContact
                                if (_device.Type == DeviceTypes.ShutterContact)
                                {
                                    ShutterContact     _shutter   = (ShutterContact)_device;
                                    ShutterContactDiff _queueable = new ShutterContactDiff(_device.Name, _device.AssociatedRoom.RoomID, _device.AssociatedRoom.RoomName);

                                    if (_shutter.LowBattery)
                                    {
                                        _queueable.LowBattery = BatteryStatus.lowbattery;
                                    }
                                    else
                                    {
                                        _queueable.LowBattery = BatteryStatus.ok;
                                    }

                                    _queueable.ShutterState = _shutter.ShutterState;
                                    iQueue.Enqueue(_queueable);
                                }
                                #endregion
                            }
                        }
                        Thread.Sleep(MAXUpdateTime);
                    }
                }
                catch (Exception e)
                {
                    ConsoleOutputLogger.WriteLine(e.Message);
                    Thread.Sleep(Properties.Settings.Default.ELVMAXReconnectTimeMsec);

                    ConsoleOutputLogger.WriteLine("ELV MAX Cube reconnect...");
                    //stream.Close();
                    //client.Close();
                }
                #endregion
            }
        }
示例#7
0
        /// <summary>
        /// This method calculates the difference between house1 and house2 - whereas house1 is the old house2 the new one
        /// </summary>
        public static List <IDeviceDiffSet> CalculateDifferences(Dictionary <String, IMAXDevice> DevicesHouse1, Dictionary <String, IMAXDevice> DevicesHouse2)
        {
            List <IDeviceDiffSet> Differences = new List <IDeviceDiffSet>();

            foreach (KeyValuePair <String, IMAXDevice> House1KVPair in DevicesHouse1)
            {
                // now we have a device from house 1 - we need to get that same device in house 2
                if (DevicesHouse2.ContainsKey(House1KVPair.Key))
                {
                    // we got it
                    IMAXDevice House2Device = DevicesHouse2[House1KVPair.Key];

                    if (House1KVPair.Value.Type == DeviceTypes.HeatingThermostat)
                    {
                        // HeatingThermostat
                        HeatingThermostatDiff Diff = null;

                        HeatingThermostat Device1 = (HeatingThermostat)House1KVPair.Value;
                        HeatingThermostat Device2 = (HeatingThermostat)House2Device;

                        if (Device1.LowBattery != Device2.LowBattery)
                        {
                            if (Diff == null)
                            {
                                Diff = new HeatingThermostatDiff(Device2.Name, Device2.AssociatedRoom.RoomID, Device2.AssociatedRoom.RoomName);
                            }

                            if (Device2.LowBattery)
                            {
                                Diff.LowBattery = BatteryStatus.lowbattery;
                            }
                            else
                            {
                                Diff.LowBattery = BatteryStatus.ok;
                            }
                        }

                        if (Device1.Mode != Device2.Mode)
                        {
                            if (Diff == null)
                            {
                                Diff = new HeatingThermostatDiff(Device2.Name, Device2.AssociatedRoom.RoomID, Device2.AssociatedRoom.RoomName);
                            }

                            Diff.Mode = Device2.Mode;
                        }

                        if (Device1.Temperature != Device2.Temperature)
                        {
                            if (Diff == null)
                            {
                                Diff = new HeatingThermostatDiff(Device2.Name, Device2.AssociatedRoom.RoomID, Device2.AssociatedRoom.RoomName);
                            }

                            Diff.Temperature = Device2.Temperature;
                        }

                        if (Diff != null)
                        {
                            if (Diff.Temperature != 0)
                            {
                                Differences.Add(Diff);
                            }
                        }
                    }
                    else
                    if (House1KVPair.Value.Type == DeviceTypes.ShutterContact)
                    {
                        // ShutterContact
                        ShutterContactDiff Diff = null;

                        ShutterContact Device1 = (ShutterContact)House1KVPair.Value;
                        ShutterContact Device2 = (ShutterContact)House2Device;

                        if (Device1.LowBattery != Device2.LowBattery)
                        {
                            if (Diff == null)
                            {
                                Diff = new ShutterContactDiff(Device2.Name, Device2.AssociatedRoom.RoomID, Device2.AssociatedRoom.RoomName);
                            }

                            if (Device2.LowBattery)
                            {
                                Diff.LowBattery = BatteryStatus.lowbattery;
                            }
                            else
                            {
                                Diff.LowBattery = BatteryStatus.ok;
                            }
                        }

                        if (Device1.ShutterState != Device2.ShutterState)
                        {
                            if (Diff == null)
                            {
                                Diff = new ShutterContactDiff(Device2.Name, Device2.AssociatedRoom.RoomID, Device2.AssociatedRoom.RoomName);
                            }

                            Diff.ShutterState = Device2.ShutterState;
                        }

                        if (Diff != null)
                        {
                            Differences.Add(Diff);
                        }
                    }
                }
            }

            return(Differences);
        }