C# (CSharp) ca.uhn.hl7v2.model.v23.datatype HD示例

示例#1

文件： CK.cs 项目： henriquetomaz/nhapi-1

 ///<summary>
 /// Creates a CK.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CK(Message message, string description) : base(message, description)
 {
     data    = new Type[4];
     data[0] = new NM(message, "ID number (NM)");
     data[1] = new ST(message, "Check digit");
     data[2] = new ID(message, 0, "Code identifying the check digit scheme employed");
     data[3] = new HD(message, "Assigning authority");
 }

示例#2

 ///<summary>
 /// Creates a RP.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public RP(Message message, string description) : base(message, description)
 {
     data    = new Type[4];
     data[0] = new ST(message, "Pointer");
     data[1] = new HD(message, "Application ID");
     data[2] = new ID(message, 0, "Type of data");
     data[3] = new ID(message, 0, "Subtype");
 }

示例#3

文件： RP.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a RP.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public RP(Message message, string description)
     : base(message, description)
 {
     data = new Type[4];
     data[0] = new ST(message,"Pointer");
     data[1] = new HD(message,"Application ID");
     data[2] = new ID(message, 0,"Type of data");
     data[3] = new ID(message, 0,"Subtype");
 }

示例#4

文件： CK.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a CK.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CK(Message message, string description)
     : base(message, description)
 {
     data = new Type[4];
     data[0] = new NM(message,"ID number (NM)");
     data[1] = new ST(message,"Check digit");
     data[2] = new ID(message, 0,"Code identifying the check digit scheme employed");
     data[3] = new HD(message,"Assigning authority");
 }

示例#5

文件： ED.cs 项目： henriquetomaz/nhapi-1

 ///<summary>
 /// Creates a ED.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public ED(Message message, string description) : base(message, description)
 {
     data    = new Type[5];
     data[0] = new HD(message, "Source application");
     data[1] = new ID(message, 0, "Type of data");
     data[2] = new ID(message, 0, "Data1");
     data[3] = new ID(message, 0, "Encoding");
     data[4] = new ST(message, "Data2");
 }

示例#6

文件： CX.cs 项目： henriquetomaz/nhapi-1

 ///<summary>
 /// Creates a CX.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CX(Message message, string description) : base(message, description)
 {
     data    = new Type[6];
     data[0] = new ST(message, "ID");
     data[1] = new ST(message, "Check digit");
     data[2] = new ID(message, 0, "Code identifying the check digit scheme employed");
     data[3] = new HD(message, "Assigning authority");
     data[4] = new IS(message, 203, "Identifier type code");
     data[5] = new HD(message, "Assigning facility");
 }

示例#7

文件： ED.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a ED.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public ED(Message message, string description)
     : base(message, description)
 {
     data = new Type[5];
     data[0] = new HD(message,"Source application");
     data[1] = new ID(message, 0,"Type of data");
     data[2] = new ID(message, 0,"Data1");
     data[3] = new ID(message, 0,"Encoding");
     data[4] = new ST(message,"Data2");
 }

示例#8

文件： CX.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a CX.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CX(Message message, string description)
     : base(message, description)
 {
     data = new Type[6];
     data[0] = new ST(message,"ID");
     data[1] = new ST(message,"Check digit");
     data[2] = new ID(message, 0,"Code identifying the check digit scheme employed");
     data[3] = new HD(message,"Assigning authority");
     data[4] = new IS(message, 203,"Identifier type code");
     data[5] = new HD(message,"Assigning facility");
 }

示例#9

 ///<summary>
 /// Creates a XON.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public XON(Message message, string description) : base(message, description)
 {
     data    = new Type[8];
     data[0] = new ST(message, "Organization name");
     data[1] = new IS(message, 0, "Organization name type code");
     data[2] = new NM(message, "ID number (NM)");
     data[3] = new ST(message, "Check digit");
     data[4] = new ID(message, 0, "Code identifying the check digit scheme employed");
     data[5] = new HD(message, "Assigning authority");
     data[6] = new IS(message, 0, "Identifier type code");
     data[7] = new HD(message, "Assigning facility ID");
 }

示例#10

 ///<summary>
 /// Creates a PL.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public PL(Message message, string description) : base(message, description)
 {
     data    = new Type[9];
     data[0] = new ID(message, 0, "Point of care (ID)");
     data[1] = new IS(message, 0, "Room");
     data[2] = new IS(message, 0, "Bed");
     data[3] = new HD(message, "Facility (HD)");
     data[4] = new IS(message, 0, "Location status");
     data[5] = new IS(message, 0, "Person location type");
     data[6] = new IS(message, 0, "Building");
     data[7] = new ST(message, "Floor");
     data[8] = new ST(message, "Location type");
 }

示例#11

 ///<summary>
 /// Creates a CN.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CN(Message message, string description) : base(message, description)
 {
     data    = new Type[9];
     data[0] = new ST(message, "ID number (ST)");
     data[1] = new ST(message, "Family name");
     data[2] = new ST(message, "Given name");
     data[3] = new ST(message, "Middle initial or name");
     data[4] = new ST(message, "Suffix (e.g., JR or III)");
     data[5] = new ST(message, "Prefix (e.g., DR)");
     data[6] = new ST(message, "Degree (e.g., MD)");
     data[7] = new ID(message, 0, "Source table");
     data[8] = new HD(message, "Assigning authority");
 }

示例#12

文件： XON.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a XON.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public XON(Message message, string description)
     : base(message, description)
 {
     data = new Type[8];
     data[0] = new ST(message,"Organization name");
     data[1] = new IS(message, 0,"Organization name type code");
     data[2] = new NM(message,"ID number (NM)");
     data[3] = new ST(message,"Check digit");
     data[4] = new ID(message, 0,"Code identifying the check digit scheme employed");
     data[5] = new HD(message,"Assigning authority");
     data[6] = new IS(message, 0,"Identifier type code");
     data[7] = new HD(message,"Assigning facility ID");
 }

示例#13

文件： PL.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a PL.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public PL(Message message, string description)
     : base(message, description)
 {
     data = new Type[9];
     data[0] = new ID(message, 0,"Point of care (ID)");
     data[1] = new IS(message, 0,"Room");
     data[2] = new IS(message, 0,"Bed");
     data[3] = new HD(message,"Facility (HD)");
     data[4] = new IS(message, 0,"Location status");
     data[5] = new IS(message, 0,"Person location type");
     data[6] = new IS(message, 0,"Building");
     data[7] = new ST(message,"Floor");
     data[8] = new ST(message,"Location type");
 }

示例#14

文件： CN.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a CN.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CN(Message message, string description)
     : base(message, description)
 {
     data = new Type[9];
     data[0] = new ST(message,"ID number (ST)");
     data[1] = new ST(message,"Family name");
     data[2] = new ST(message,"Given name");
     data[3] = new ST(message,"Middle initial or name");
     data[4] = new ST(message,"Suffix (e.g., JR or III)");
     data[5] = new ST(message,"Prefix (e.g., DR)");
     data[6] = new ST(message,"Degree (e.g., MD)");
     data[7] = new ID(message, 0,"Source table");
     data[8] = new HD(message,"Assigning authority");
 }

示例#15

 ///<summary>
 /// Creates a CM_NDL.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CM_NDL(Message message, string description) : base(message, description)
 {
     data     = new Type[11];
     data[0]  = new CN(message, "Name");
     data[1]  = new TS(message, "Start date/time");
     data[2]  = new TS(message, "End date/time");
     data[3]  = new IS(message, 0, "Point of care (IS)");
     data[4]  = new IS(message, 0, "Room");
     data[5]  = new IS(message, 0, "Bed");
     data[6]  = new HD(message, "Facility (HD)");
     data[7]  = new IS(message, 0, "Location status");
     data[8]  = new IS(message, 0, "Person location type");
     data[9]  = new IS(message, 0, "Building");
     data[10] = new ST(message, "Floor");
 }

示例#16

文件： CM_NDL.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a CM_NDL.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CM_NDL(Message message, string description)
     : base(message, description)
 {
     data = new Type[11];
     data[0] = new CN(message,"Name");
     data[1] = new TS(message,"Start date/time");
     data[2] = new TS(message,"End date/time");
     data[3] = new IS(message, 0,"Point of care (IS)");
     data[4] = new IS(message, 0,"Room");
     data[5] = new IS(message, 0,"Bed");
     data[6] = new HD(message,"Facility (HD)");
     data[7] = new IS(message, 0,"Location status");
     data[8] = new IS(message, 0,"Person location type");
     data[9] = new IS(message, 0,"Building");
     data[10] = new ST(message,"Floor");
 }

示例#17

 ///<summary>
 /// Creates a XCN.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public XCN(Message message, string description) : base(message, description)
 {
     data     = new Type[14];
     data[0]  = new ST(message, "ID number (ST)");
     data[1]  = new ST(message, "Family name");
     data[2]  = new ST(message, "Given name");
     data[3]  = new ST(message, "Middle initial or name");
     data[4]  = new ST(message, "Suffix (e.g., JR or III)");
     data[5]  = new ST(message, "Prefix (e.g., DR)");
     data[6]  = new ST(message, "Degree (e.g., MD)");
     data[7]  = new ID(message, 0, "Source table");
     data[8]  = new HD(message, "Assigning authority");
     data[9]  = new ID(message, 0, "Name type");
     data[10] = new ST(message, "Identifier check digit");
     data[11] = new ID(message, 0, "Code identifying the check digit scheme employed");
     data[12] = new IS(message, 0, "Identifier type code");
     data[13] = new HD(message, "Assigning facility ID");
 }

示例#18

文件： XCN.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a XCN.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public XCN(Message message, string description)
     : base(message, description)
 {
     data = new Type[14];
     data[0] = new ST(message,"ID number (ST)");
     data[1] = new ST(message,"Family name");
     data[2] = new ST(message,"Given name");
     data[3] = new ST(message,"Middle initial or name");
     data[4] = new ST(message,"Suffix (e.g., JR or III)");
     data[5] = new ST(message,"Prefix (e.g., DR)");
     data[6] = new ST(message,"Degree (e.g., MD)");
     data[7] = new ID(message, 0,"Source table");
     data[8] = new HD(message,"Assigning authority");
     data[9] = new ID(message, 0,"Name type");
     data[10] = new ST(message,"Identifier check digit");
     data[11] = new ID(message, 0,"Code identifying the check digit scheme employed");
     data[12] = new IS(message, 0,"Identifier type code");
     data[13] = new HD(message,"Assigning facility ID");
 }

示例#19

文件： CM_LA1.cs 项目： henriquetomaz/nhapi-1

 ///<summary>
 /// Creates a CM_LA1.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CM_LA1(Message message, string description) : base(message, description)
 {
     data     = new Type[16];
     data[0]  = new ST(message, "Point of care (ST)");
     data[1]  = new IS(message, 0, "Room");
     data[2]  = new IS(message, 0, "Bed");
     data[3]  = new HD(message, "Facility (HD)");
     data[4]  = new IS(message, 0, "Location status");
     data[5]  = new IS(message, 0, "Person location type");
     data[6]  = new IS(message, 0, "Building");
     data[7]  = new ST(message, "Floor");
     data[8]  = new ST(message, "Street address");
     data[9]  = new ST(message, "Other designation");
     data[10] = new ST(message, "City");
     data[11] = new ST(message, "State or province");
     data[12] = new ST(message, "Zip or postal code");
     data[13] = new ID(message, 0, "Country");
     data[14] = new ID(message, 0, "Address type");
     data[15] = new ST(message, "Other geographic designation");
 }

示例#20

文件： CM_LA1.cs 项目： snosrap/nhapi

 ///<summary>
 /// Creates a CM_LA1.
 /// <param name="message">The Message to which this Type belongs</param>
 ///</summary>
 public CM_LA1(Message message, string description)
     : base(message, description)
 {
     data = new Type[16];
     data[0] = new ST(message,"Point of care (ST)");
     data[1] = new IS(message, 0,"Room");
     data[2] = new IS(message, 0,"Bed");
     data[3] = new HD(message,"Facility (HD)");
     data[4] = new IS(message, 0,"Location status");
     data[5] = new IS(message, 0,"Person location type");
     data[6] = new IS(message, 0,"Building");
     data[7] = new ST(message,"Floor");
     data[8] = new ST(message,"Street address");
     data[9] = new ST(message,"Other designation");
     data[10] = new ST(message,"City");
     data[11] = new ST(message,"State or province");
     data[12] = new ST(message,"Zip or postal code");
     data[13] = new ID(message, 0,"Country");
     data[14] = new ID(message, 0,"Address type");
     data[15] = new ST(message,"Other geographic designation");
 }