public Result Execute(ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument _uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application _app = uiapp.Application;
Autodesk.Revit.DB.Document _doc = _uidoc.Document;
BuiltInCategory bicFamilyA = BuiltInCategory.OST_DuctTerminal;
BuiltInCategory bicFamilyB = BuiltInCategory.OST_DataDevices;
BuiltInCategory bicFamilyC = BuiltInCategory.OST_MechanicalEquipment;
//BuiltInCategory bicFamilyC = BuiltInCategory.OST_Sprinklers;
ICollection <BuiltInCategory> categories = new[] { bicFamilyA, bicFamilyB, bicFamilyC };
ElementFilter myPCatFilter = new ElementMulticategoryFilter(categories);
ISelectionFilter myPickFilter = SelFilter.GetElementFilter(myPCatFilter);
bool keepOnTruckn = true;
FormMsgWPF formMsg = new FormMsgWPF();
formMsg.Show();
using (TransactionGroup pickGrp = new TransactionGroup(_doc)) {
pickGrp.Start("CmdCycleType");
bool firstTime = true;
//string strCats= "";
//foreach (BuiltInCategory iCat in categories) {
// strCats = strCats + iCat.ToString().Replace("OST_", "") + ", ";
//}
string strCats = FamilyUtils.BICListMsg(categories);
formMsg.SetMsg("Pick the " + strCats + " to check its type.", "Type Cycle:");
while (keepOnTruckn)
{
try {
Reference pickedElemRef = _uidoc.Selection.PickObject(ObjectType.Element, myPickFilter, "Pick the " + bicFamilyA.ToString() + " to cycle its types. (Press ESC to cancel)");
Element pickedElem = _doc.GetElement(pickedElemRef.ElementId);
FamilyInstance fi = pickedElem as FamilyInstance;
FamilySymbol fs = fi.Symbol;
var famTypesIds = fs.Family.GetFamilySymbolIds().OrderBy(e => _doc.GetElement(e).Name).ToList();
int thisIndx = famTypesIds.FindIndex(e => e == fs.Id);
int nextIndx = thisIndx;
if (!firstTime)
{
nextIndx = nextIndx + 1;
if (nextIndx >= famTypesIds.Count)
{
nextIndx = 0;
}
}
else
{
firstTime = false;
}
if (pickedElem != null)
{
using (Transaction tp = new Transaction(_doc, "PlunkOMatic:SetParam")) {
tp.Start();
if (pickedElem != null)
{
fi.Symbol = _doc.GetElement(famTypesIds[nextIndx]) as FamilySymbol;
formMsg.SetMsg("Currently:\n" + fi.Symbol.Name + "\n\nPick again to cycle its types.", "Type Cycling");
}
tp.Commit();
}
}
else
{
keepOnTruckn = false;
}
} catch (Exception) {
keepOnTruckn = false;
//throw;
}
}
pickGrp.Assimilate();
}
formMsg.Close();
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument _uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application _app = uiapp.Application;
Autodesk.Revit.DB.Document _doc = _uidoc.Document;
PlunkOClass plunkThis = new PlunkOClass(commandData.Application);
string wsName = "MECH HVAC";
string FamilyName = "M_BAS SENSOR";
string FamilySymbolName = "THERMOSTAT";
string pName = "STAT ZONE NUMBER";
string FamilyTagName = "M_EQIP_BAS_SENSOR_TAG";
string FamilyTagNameSymb = "SENSOR";
bool oneShot = true;
bool hasLeader = false;
BuiltInCategory bicTagBeing = BuiltInCategory.OST_MechanicalEquipmentTags;
BuiltInCategory bicFamily = BuiltInCategory.OST_DataDevices;
BuiltInCategory _bicMechItem = BuiltInCategory.OST_MechanicalEquipment;
Element elemPlunked;
bool keepOnTruckn = true;
while (keepOnTruckn)
{
try {
Result result = plunkThis.PlunkThisFamilyType(FamilyName, FamilySymbolName, wsName, bicFamily, out elemPlunked, oneShot);
FormMsgWPF formMsg = new FormMsgWPF();
if ((result == Result.Succeeded) & (elemPlunked != null))
{
formMsg.Show();
formMsg.SetMsg("Now Select the Mech Unit for this sensor.", "Sensor For MEQ");
Transaction tp = new Transaction(_doc, "PlunkOMatic:OrientGuts ");
tp.Start();
plunkThis.OrientTheInsides(elemPlunked);
tp.Commit();
ICollection <BuiltInCategory> categories = new[] { _bicMechItem };
ElementFilter myPCatFilter = new ElementMulticategoryFilter(categories);
ISelectionFilter myPickFilter = SelFilter.GetElementFilter(myPCatFilter);
try {
Reference pickedElemRef = _uidoc.Selection.PickObject(ObjectType.Element, myPickFilter, "Select the Mech Unit for this sensor.");
Element pickedElem = _doc.GetElement(pickedElemRef.ElementId);
formMsg.SetMsg("Now place the unit text at the sensor.", "Sensor For MEQ");
plunkThis.AddThisTag(pickedElem, FamilyTagName, FamilyTagNameSymb, pName, bicTagBeing, hasLeader);
formMsg.Close();
} catch (Exception) {
formMsg.Close();
keepOnTruckn = false;
//throw;
}
}
else
{
formMsg.Close();
keepOnTruckn = false;
}
} catch (Autodesk.Revit.Exceptions.OperationCanceledException) {
keepOnTruckn = false;
// TaskDialog.Show("Where", "here " );
}
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument _uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application _app = uiapp.Application;
Autodesk.Revit.DB.Document _doc = _uidoc.Document;
PlunkOClass plunkThis = new PlunkOClass(commandData.Application);
string wsName = "MECH HVAC";
string FamilyName = "M_BAS SENSOR";
string FamilySymbolName = "THERMOSTAT";
string FamilyTagName = "M_EQIP_BAS_SENSOR_TAG";
string FamilyTagNameSymb = "TAG NUMBER ONLY";
string FamilyTagName2 = "M_DEVICE_BAS_TAG_SYM";
string FamilyTagNameSymb2 = "M-DATA-SENSOR";
bool hasLeader = false;
bool oneShot = true;
BuiltInCategory bicTagBeing = BuiltInCategory.OST_MechanicalEquipmentTags;
BuiltInCategory bicTagBeing2 = BuiltInCategory.OST_DataDeviceTags;
BuiltInCategory bicFamily = BuiltInCategory.OST_DataDevices;
BuiltInCategory bicMechItem = BuiltInCategory.OST_MechanicalEquipment;
Element elemPlunked;
bool keepOnTruckn = true;
while (keepOnTruckn)
{
try {
Result result = plunkThis.PlunkThisFamilyType(FamilyName, FamilySymbolName, wsName, bicFamily, out elemPlunked, oneShot);
FormMsgWPF formMsg = new FormMsgWPF();
if ((result == Result.Succeeded) & (elemPlunked != null))
{
plunkThis.AddThisTag(elemPlunked, FamilyTagName2, FamilyTagNameSymb2, "Offset Stat", bicTagBeing2, true);
formMsg.Show();
formMsg.SetMsg("Now Select the Mech Unit for this sensor.", "Offset Sensor For MEQ");
Transaction tp = new Transaction(_doc, "PlunkOMatic:SymVis");
tp.Start();
Parameter parForVis = elemPlunked.LookupParameter("SHOW SYM");
if (null != parForVis)
{
parForVis.Set(0);
}
plunkThis.OrientTheInsides(elemPlunked); // left in in case type is changed later
tp.Commit();
ICollection <BuiltInCategory> categories = new[] { bicMechItem };
ElementFilter myPCatFilter = new ElementMulticategoryFilter(categories);
ISelectionFilter myPickFilter = SelFilter.GetElementFilter(myPCatFilter);
try {
Reference pickedElemRef = _uidoc.Selection.PickObject(ObjectType.Element, myPickFilter, "Select the Mech Unit for this sensor.");
Element pickedElem = _doc.GetElement(pickedElemRef.ElementId);
formMsg.SetMsg("Now place the unit text at the sensor.", "Offset Sensor For MEQ");
plunkThis.AddThisTag(pickedElem, FamilyTagName, FamilyTagNameSymb, "Offset Stat", bicTagBeing, hasLeader);
formMsg.Close();
} catch (Exception) {
formMsg.Close();
keepOnTruckn = false;
//throw;
}
}
else
{
formMsg.Close();
keepOnTruckn = false;
}
} catch (Exception) {
keepOnTruckn = false;
//throw;
}
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument _uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application _app = uiapp.Application;
Autodesk.Revit.DB.Document _doc = _uidoc.Document;
string parmTogN = "SHOW SYM";
BuiltInCategory bicFamily = BuiltInCategory.OST_DataDevices;
BuiltInCategory bicFamilyTag = BuiltInCategory.OST_DataDeviceTags;
ICollection <BuiltInCategory> categories = new[] { bicFamily, bicFamilyTag };
ElementFilter myPCatFilter = new ElementMulticategoryFilter(categories);
ISelectionFilter myPickFilter = SelFilter.GetElementFilter(myPCatFilter);
bool keepOnTruckn = true;
FormMsgWPF formMsgWPF = new FormMsgWPF();
formMsgWPF.Show();
while (keepOnTruckn)
{
try {
formMsgWPF.SetMsg("Pick the Sensor to toggle symbol visibility.", "Sensor Symbol Toggle");
Reference pickedElemRef = _uidoc.Selection.PickObject(ObjectType.Element, myPickFilter, "Pick the Sensor to toggle symbol visibility. (Press ESC to cancel)");
Element pickedElem = _doc.GetElement(pickedElemRef.ElementId);
// get tagged element instead if user picked the tag
if (pickedElem.GetType() == typeof(IndependentTag))
{
IndependentTag _tag = (IndependentTag)pickedElem;
pickedElem = _doc.GetElement(_tag.TaggedLocalElementId);
}
if (pickedElem != null)
{
Transaction tp = new Transaction(_doc, "PlunkOMatic:SetParam");
tp.Start();
//TaskDialog.Show("Debug", pickedElem.ToString());
if (pickedElem != null)
{
Parameter parForTog = pickedElem.LookupParameter(parmTogN);
if (null != parForTog)
{
if (parForTog.AsInteger() == 1)
{
parForTog.Set(0);
}
else
{
parForTog.Set(1);
}
}
}
tp.Commit();
}
else
{
keepOnTruckn = false;
}
} catch (Exception) {
keepOnTruckn = false;
//throw;
}
}
formMsgWPF.Close();
return(Result.Succeeded);
}
