public void Writing_All_Data_Should_Create_Exact_Copy()
{
stream = new BufferedBlockOutputStream(token, 2000, WriteBlock);
int count = source.Length/20;
for(int i=0; i<20; i++)
{
if(i%2 == 0)
{
byte[] copy = new byte[count];
Array.Copy(source, i*count, copy, 0, count);
stream.Write(copy, 0, copy.Length);
}
else
{
stream.Write(source, i*count, count);
}
}
stream.Flush();
VerifyTransmission();
}
public void Resuming_Takes_Offset_Of_Previously_Written_Blocks_Into_Account()
{
token.MaxBlockSize = 3000;
token.NextBlockOffset = 15000;
stream = new BufferedBlockOutputStream(token, 2000, WriteBlock);
stream.Write(source, 0, 100);
stream.Flush();
Assert.AreEqual(100, stream.WrittenBytes);
Assert.AreEqual(1, receivedBlocks.Count);
//check the offset of the block
Assert.AreEqual(15000, receivedBlocks[0].Offset);
//flush another one
stream.Write(source, 0, 200);
stream.Flush();
Assert.AreEqual(300, stream.WrittenBytes);
Assert.AreEqual(2, receivedBlocks.Count);
//check the offset of the block
Assert.AreEqual(15100, receivedBlocks[1].Offset);
}
public void Last_Transmitted_Block_Number_Should_Match_Token_After_Flushing()
{
token.MaxBlockSize = 3000;
stream = new BufferedBlockOutputStream(token, 2000, WriteBlock);
Assert.IsNull(stream.LastTransmittedBlockNumber);
stream.Write(source, 0, 100);
stream.Flush();
Assert.AreEqual(1, receivedBlocks.Count);
Assert.AreEqual(receivedBlocks[0].BlockNumber, stream.LastTransmittedBlockNumber);
Assert.AreEqual(token.TransmittedBlockCount, stream.LastTransmittedBlockNumber);
}
public void Flushing_Buffer_Should_Create_Multiple_Blocks_If_Buffer_Is_Bigger_Than_Maximum_BlockSize()
{
//set auto-stream so it doesn't auto-flush
stream = new BufferedBlockOutputStream(token, 10000, WriteBlock);
token.MaxBlockSize = 3000;
//write 7000 bytes - no flush
stream.Write(source, 0, 7000);
Assert.IsEmpty(receivedBlocks);
Assert.AreEqual(0, stream.WrittenBytes);
Assert.AreEqual(7000, stream.InternalBufferSize);
stream.Flush();
Assert.AreEqual(3, receivedBlocks.Count);
Assert.AreEqual(3000, receivedBlocks[0].BlockLength);
Assert.AreEqual(3000, receivedBlocks[1].BlockLength);
Assert.AreEqual(1000, receivedBlocks[2].BlockLength);
}
public void Buffer_And_Written_Bytes_Indication_Should_Remain_Untouched_If_Submission_Causes_Exception()
{
bool throwException = true;
Action<BufferedDataBlock> action = (block) =>
{
if(throwException) throw new InvalidOperationException("test");
receivedBlocks.Add(block);
};
stream = new BufferedBlockOutputStream(token, 3000, action);
token.MaxBlockSize = 20000;
try
{
stream.Write(source, 0, 5000);
Assert.Fail("Expected exception.");
}
catch (InvalidOperationException)
{
}
//nothing should have written or even discarded
Assert.AreEqual(0, receivedBlocks.Count);
Assert.AreEqual(0, stream.WrittenBytes);
Assert.AreEqual(5000, stream.InternalBufferSize);
//disable exception
throwException = false;
//write - should trigger another autoflush
stream.WriteByte(3);
//whole buffer should have been flushed
Assert.AreEqual(1, receivedBlocks.Count);
Assert.AreEqual(5001, stream.WrittenBytes);
Assert.AreEqual(0, stream.InternalBufferSize);
}
public void Setting_The_AutoFlush_Threshold_To_Zero_Should_Flush_Every_Write()
{
stream = new BufferedBlockOutputStream(token, 0, WriteBlock);
token.MaxBlockSize = 1000;
for(int i=0; i<5; i++)
{
//the first write writes 0 bytes
stream.Write(source, 0, i * 100);
Assert.AreEqual(i, receivedBlocks.Count);
Assert.AreEqual(0, stream.InternalBufferSize);
}
}
public void Submitting_An_Empty_Buffer_Should_Work_But_Doesnt_Flash()
{
stream = new BufferedBlockOutputStream(token, 0, WriteBlock);
token.MaxBlockSize = 1000;
//write 0 bytes
byte[] src = new byte[0];
stream.Write(src, 0, 0);
Assert.AreEqual(0, receivedBlocks.Count);
Assert.AreEqual(0, stream.InternalBufferSize);
Assert.AreEqual(0, stream.WrittenBytes);
}
public void Exceeding_Threshold_In_Multiple_Writes_Should_Only_Flush_After_Exceeding()
{
//configure stream to flush after 5000 bytes
stream = new BufferedBlockOutputStream(token, 5000, WriteBlock);
token.MaxBlockSize = 2500;
//write 6000 bytes - this should flush the first 5000 bytes
stream.Write(source, 0, 2000);
Assert.AreEqual(0, receivedBlocks.Count);
stream.Write(source, 0, 4000);
Assert.AreEqual(2, receivedBlocks.Count);
Assert.AreEqual(2500, receivedBlocks[0].BlockLength);
Assert.AreEqual(2500, receivedBlocks[1].BlockLength);
}
public void Flushing_Stream_Should_Submit_All_Buffered_Data()
{
stream = new BufferedBlockOutputStream(token, 50000, WriteBlock);
token.MaxBlockSize = 3000;
stream.Write(source, 0, 7000);
Assert.AreEqual(0, receivedBlocks.Count);
stream.Flush();
Assert.AreEqual(3, receivedBlocks.Count);
Assert.AreEqual(3000, receivedBlocks[0].BlockLength);
Assert.AreEqual(3000, receivedBlocks[1].BlockLength);
Assert.AreEqual(1000, receivedBlocks[2].BlockLength);
Assert.AreEqual(0, stream.InternalBufferSize);
}
public void If_Max_Block_Size_Is_Below_Auto_Flush_Trigger_Should_Even_Send_Full_Blocks_If_Under_Threshold_While_Flushing ()
{
//configure stream to flush after 1000 bytes
stream = new BufferedBlockOutputStream(token, 3000, WriteBlock);
token.MaxBlockSize = 1000;
//this should create 4 blocks with the max size, the remaining 500
//if below the threshold AND the max size, so the should not be written
stream.Write(source, 0, 4500);
Assert.AreEqual(4, receivedBlocks.Count);
receivedBlocks.Do(b => Assert.AreEqual(1000, b.BlockLength));
Assert.AreEqual(500, stream.InternalBufferSize);
Assert.AreEqual(4000, stream.WrittenBytes);
}
public void AutoFlushing_Should_Write_As_Much_As_Possible_Without_Creating_Blocks_Smaller_Than_Threshold()
{
//configure stream to flush after 1000 bytes
stream = new BufferedBlockOutputStream(token, 1000, WriteBlock);
token.MaxBlockSize = 3000;
//this should create a block with the max size, the remaining 500
//if below the threshold, so the should not be written
stream.Write(source, 0, 4500);
Assert.AreEqual(2, receivedBlocks.Count);
Assert.AreEqual(3000, receivedBlocks[0].BlockLength);
Assert.AreEqual(1500, receivedBlocks[1].BlockLength);
stream.Write(source, 0, 3500);
Assert.AreEqual(3, receivedBlocks.Count);
Assert.AreEqual(3000, receivedBlocks[2].BlockLength);
Assert.AreEqual(500, stream.InternalBufferSize);
}
public void AutoFlushing_Should_Create_Blocks_As_Big_As_Max_Block_Size()
{
//configure stream to flush after 1000 bytes
stream = new BufferedBlockOutputStream(token, 1000, WriteBlock);
token.MaxBlockSize = 3000;
//this should create a block with the max size, the remaining 500
//if below the threshold, so the should not be written
stream.Write(source, 0, 3500);
Assert.AreEqual(1, receivedBlocks.Count);
Assert.AreEqual(3000, receivedBlocks.First().BlockLength);
}
public void Submitting_Data_At_Or_Above_Threshold_Should_Flush_Immediately()
{
//configure stream to flush after 1000 bytes
stream = new BufferedBlockOutputStream(token, 1000, WriteBlock);
token.MaxBlockSize = 3000;
//write 1000 bytes - this should flush
stream.Write(source, 0, 1000);
Assert.AreEqual(1, receivedBlocks.Count);
Assert.AreEqual(1000, receivedBlocks.First().BlockLength);
//write another 2000 bytes - this should flush again
stream.Write(source, 0, 2000);
Assert.AreEqual(2, receivedBlocks.Count);
Assert.AreEqual(2000, receivedBlocks[1].BlockLength);
}
public void Submitting_Data_Below_Threshold_Should_Not_Flush()
{
//configure stream to flush after 2000 bytes
stream = new BufferedBlockOutputStream(token, 10000, WriteBlock);
token.MaxBlockSize = 3000;
stream.Write(source, 0, 7000);
Assert.IsEmpty(receivedBlocks);
}