|
public ConvertPartnumber ( string partnumber, int length ) : |
||
| partnumber | string | |
| length | int | |
| return | ||
private void ConvertPartNumber()
{
partNumberConverter pnc = new partNumberConverter();
ECUInfo ecuinfo = pnc.ConvertPartnumber(buttonEdit1.Text, 0);
lblCarModel.Text = "---";
lblECUType.Text = "---";
lblFuel.Text = "---";
lblCarType.Text = "---";
lblRating.Text = "--/--";
lblSoftwareID.Text = "---";
if (ecuinfo.CarMake != string.Empty)
{
lblCarModel.Text = ecuinfo.CarMake;
lblECUType.Text = ecuinfo.EcuType;
lblFuel.Text = ecuinfo.FuelType;
lblCarType.Text = ecuinfo.CarType;
lblSoftwareID.Text = ecuinfo.SoftwareID;
if (ecuinfo.HP > 0 || ecuinfo.TQ > 0)
{
lblRating.Text = ecuinfo.HP + " hp/" + ecuinfo.TQ + " Nm";
}
else
{
lblRating.Text = "";
}
if (System.IO.File.Exists(Path.Combine(Application.StartupPath, "Binaries\\" + buttonEdit1.Text + ".BIN")))
{
simpleButton2.Enabled = true;
simpleButton3.Enabled = true;
simpleButton4.Enabled = true;
}
else
{
simpleButton2.Enabled = false;
simpleButton3.Enabled = false;
simpleButton4.Enabled = false;
}
}
else
{
MessageBox.Show("The entered partnumber was not recognized by VAGEDCSuite");
}
}
public override SymbolCollection parseFile(string filename, out List<CodeBlock> newCodeBlocks, out List<AxisHelper> newAxisHelpers)
{
newCodeBlocks = new List<CodeBlock>();
SymbolCollection newSymbols = new SymbolCollection();
newAxisHelpers = new List<AxisHelper>();
byte[] allBytes = File.ReadAllBytes(filename);
string boschnumber = ExtractBoschPartnumber(allBytes);
string softwareNumber = ExtractSoftwareNumber(allBytes);
string additionalInfo = ExtractInfo(allBytes);
string partnumber = ExtractPartnumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschnumber, allBytes.Length);
// check if V6 2.5 TDI/R4 1.9 TDI/R3 1.4 TDi
int nrCylinders = pnc.GetNumberOfCylinders(info.EngineType, additionalInfo);
// we can detect maps depending on ECUType/EngineType/nrCylinders/Filesize etc
VerifyCodeBlocks(allBytes, newSymbols, newCodeBlocks);
for (int t = 0; t < allBytes.Length - 1; t += 2)
{
int len2skip = 0;
if (CheckMap(t, allBytes, newSymbols, newCodeBlocks, out len2skip))
{
if (len2skip > 2) len2skip -= 2; // make sure we don't miss maps
if ((len2skip % 2) > 0) len2skip -= 1;
if (len2skip < 0) len2skip = 0;
// t += len2skip;
// Console.WriteLine("map detected: " + t.ToString("X8"));
}
}
newSymbols.SortColumn = "Flash_start_address";
newSymbols.SortingOrder = GenericComparer.SortOrder.Ascending;
newSymbols.Sort();
NameKnownMaps(allBytes, newSymbols, newCodeBlocks);
BuildAxisIDList(newSymbols, newAxisHelpers);
MatchAxis(newSymbols, newAxisHelpers);
FindSVBL(allBytes, filename, newSymbols, newCodeBlocks);
SymbolTranslator strans = new SymbolTranslator();
foreach (SymbolHelper sh in newSymbols)
{
sh.Description = strans.TranslateSymbolToHelpText(sh.Varname);
}
// check for must have maps... if there are maps missing, report it
return newSymbols;
}
private void AddPartNumber(string part)
{
partNumberConverter pnc = new partNumberConverter();
ECUInfo ecuinfo = new ECUInfo();
ecuinfo = pnc.ConvertPartnumber(part, 0);
dt.Rows.Add(ecuinfo.CarMake, ecuinfo.CarType, ecuinfo.EngineType, part, ecuinfo.SoftwareID, ecuinfo.EcuType, ecuinfo.FuelType, ecuinfo.HP, ecuinfo.TQ);
}
public EDCFileType DetermineFileType(string fileName, bool isPrimaryFile)
{
byte[] allBytes = File.ReadAllBytes(fileName);
string boschnumber = ExtractBoschPartnumber(allBytes);
//Console.WriteLine("Bosch number: " + boschnumber);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschnumber, allBytes.Length);
if (info.EcuType.Contains("EDC15P-6"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15P6;
return EDCFileType.EDC15P6;
}
else if (info.EcuType.Contains("EDC15P"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15P;
return EDCFileType.EDC15P;
}
else if (info.EcuType.Contains("EDC15M"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15M;
return EDCFileType.EDC15M;
}
else if (info.EcuType.Contains("MSA15") || info.EcuType.Contains("EDC15V-5"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.MSA15;
return EDCFileType.MSA15;
}
else if (info.EcuType.Contains("MSA12"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.MSA12;
return EDCFileType.MSA12;
}
else if (info.EcuType.Contains("MSA11"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.MSA11;
return EDCFileType.MSA11;
}
else if (info.EcuType.Contains("MSA6"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.MSA6;
return EDCFileType.MSA6;
}
else if (info.EcuType.Contains("EDC15V"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15V;
return EDCFileType.EDC15V;
}
if (info.EcuType.Contains("EDC15C"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15C;
return EDCFileType.EDC15C;
}
else if (info.EcuType.Contains("EDC16"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC16;
return EDCFileType.EDC16;
}
else if (info.EcuType.Contains("EDC17"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC17;
return EDCFileType.EDC17;
}
else if (IsEDC16Partnumber(boschnumber))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC16;
return EDCFileType.EDC16;
}
else if (boschnumber != string.Empty)
{
if (allBytes.Length == 1024 * 1024 * 2)
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC17;
return EDCFileType.EDC17;
}
else if (boschnumber.StartsWith("EDC17"))
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC17;
return EDCFileType.EDC17;
}
else
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC15V;
return EDCFileType.EDC15V;
}
}
else
{
if (isPrimaryFile) m_currentFileType = EDCFileType.EDC16;
return EDCFileType.EDC16; // default to EDC16???
}
}
private void btnFirmwareInformation_ItemClick(object sender, ItemClickEventArgs e)
{
if (Tools.Instance.m_currentfile != string.Empty)
{
if(File.Exists(Tools.Instance.m_currentfile))
{
byte[] allBytes = File.ReadAllBytes(Tools.Instance.m_currentfile);
IEDCFileParser parser = Tools.Instance.GetParserForFile(Tools.Instance.m_currentfile, false);
partNumberConverter pnc = new partNumberConverter();
ECUInfo ecuinfo = pnc.ConvertPartnumber(parser.ExtractBoschPartnumber(allBytes), allBytes.Length);
frmFirmwareInfo info = new frmFirmwareInfo();
info.InfoString = parser.ExtractInfo(allBytes);
info.partNumber = parser.ExtractBoschPartnumber(allBytes);
if(ecuinfo.SoftwareID == "") ecuinfo.SoftwareID = parser.ExtractPartnumber(allBytes);
info.SoftwareID = ecuinfo.SoftwareID + " " + parser.ExtractSoftwareNumber(allBytes);
info.carDetails = ecuinfo.CarMake + " " + ecuinfo.CarType;
string enginedetails = ecuinfo.EngineType;
string hpinfo = string.Empty;
string tqinfo = string.Empty;
if (ecuinfo.HP > 0) hpinfo = ecuinfo.HP.ToString() + " bhp";
if (ecuinfo.TQ > 0) tqinfo = ecuinfo.TQ.ToString() + " Nm";
if (hpinfo != string.Empty || tqinfo != string.Empty)
{
enginedetails += " (";
if (hpinfo != string.Empty) enginedetails += hpinfo;
if (hpinfo != string.Empty && tqinfo != string.Empty) enginedetails += "/";
if (tqinfo != string.Empty) enginedetails += tqinfo;
enginedetails += ")";
}
info.EngineType = /*ecuinfo.EngineType*/ enginedetails;
info.ecuDetails = ecuinfo.EcuType;
//DumpECUInfo(ecuinfo);
ChecksumResultDetails result = Tools.Instance.UpdateChecksum(Tools.Instance.m_currentfile, true);
string chkType = string.Empty;
if (result.TypeResult == ChecksumType.VAG_EDC15P_V41) chkType = "VAG EDC15P V4.1";
else if (result.TypeResult == ChecksumType.VAG_EDC15P_V41V2) chkType = "VAG EDC15P V4.1v2";
else if (result.TypeResult == ChecksumType.VAG_EDC15P_V41_2002) chkType = "VAG EDC15P V4.1 2002+";
else if (result.TypeResult != ChecksumType.Unknown) chkType = result.TypeResult.ToString();
chkType += " " + result.CalculationResult.ToString();
info.checksumType = chkType;
// number of codeblocks?
info.codeBlocks = DetermineNumberOfCodeblocks().ToString();
info.ShowDialog();
}
}
}
private void LoadFiles()
{
loading = true;
simpleButton1.Text = "Cancel";
simpleButton2.Enabled = false;
SetProgressVisibility(true);
SetScanProgress("scanning...", 0);
Application.DoEvents();
ctrlAirmassResult airmassResult = new ctrlAirmassResult();
partNumberConverter pnc = new partNumberConverter();
List<ScannedFile> detectedFiles = new List<ScannedFile>();
int fileCounter = 0;
if (Directory.Exists(buttonEdit1.Text))
{
string[] files = Directory.GetFiles(buttonEdit1.Text, "*.*", SearchOption.AllDirectories);
foreach (string file in files)
{
fileCounter++;
int percentage = (fileCounter * 100) / files.Length;
SetScanProgress("importing...", percentage);
if (cancelLoad)
{
cancelLoad = false;
break;
}
FileInfo fi = new FileInfo(file);
this.Text = "Library builder - " + Path.GetFileNameWithoutExtension(file);
Application.DoEvents();
if (IsValidLength(fi.Length))
{
IEDCFileParser parser = Tools.Instance.GetParserForFile(file, false);
byte[] allBytes = File.ReadAllBytes(file);
string boschPartnumber = parser.ExtractBoschPartnumber(allBytes);
List<CodeBlock> newCodeBlocks = new List<CodeBlock>();
List<AxisHelper> newAxisHelpers = new List<AxisHelper>();
if (boschPartnumber != string.Empty)
{
//string additionalInfo = parser.ExtractInfo(allBytes);
SymbolCollection sc = parser.parseFile(file, out newCodeBlocks, out newAxisHelpers);
ECUInfo info = pnc.ConvertPartnumber(boschPartnumber, allBytes.Length);
ScannedFile newFile = new ScannedFile();
newFile.CarMake = info.CarMake;
newFile.CarType = info.CarType;
newFile.EcuType = info.EcuType;
newFile.EngineType = info.EngineType;
newFile.FuellingType = info.FuellingType;
newFile.FuelType = info.FuelType;
newFile.HP = info.HP;
newFile.PartNumber = info.PartNumber;
newFile.SoftwareID = info.SoftwareID;
newFile.TQ = info.TQ;
if (info.EcuType.Contains("EDC15P-6"))
{
newFile.Filetype = EDCFileType.EDC15P6;
}
else if (info.EcuType.Contains("EDC15P"))
{
newFile.Filetype = EDCFileType.EDC15P;
}
else if (info.EcuType.Contains("EDC15M"))
{
newFile.Filetype = EDCFileType.EDC15M;
}
else if (info.EcuType.Contains("EDC15V-5."))
{
newFile.Filetype = EDCFileType.MSA15;
}
else if (info.EcuType.Contains("EDC15V"))
{
newFile.Filetype = EDCFileType.EDC15V;
}
else if (info.EcuType.Contains("EDC15C"))
{
newFile.Filetype = EDCFileType.EDC15C;
}
else if (info.EcuType.Contains("EDC16"))
{
newFile.Filetype = EDCFileType.EDC16;
}
else if (info.EcuType.Contains("EDC17"))
{
newFile.Filetype = EDCFileType.EDC17;
}
else if (info.EcuType.Contains("MSA15"))
{
newFile.Filetype = EDCFileType.MSA15;
}
else if (info.EcuType.Contains("MSA12"))
{
newFile.Filetype = EDCFileType.MSA12;
}
else if (info.EcuType.Contains("MSA11"))
{
newFile.Filetype = EDCFileType.MSA11;
}
else if (info.EcuType.Contains("MSA6"))
{
newFile.Filetype = EDCFileType.MSA6;
}
else if (boschPartnumber != string.Empty)
{
if (fi.Length == 1024 * 1024 * 2)
{
newFile.Filetype = EDCFileType.EDC17;
}
else if(boschPartnumber.StartsWith("EDC17"))
{
newFile.Filetype = EDCFileType.EDC17;
}
else
{
newFile.Filetype = EDCFileType.EDC15V;
}
}
else
{
newFile.Filetype = EDCFileType.EDC16; // default to EDC16???
}
newFile.Filename = file;
newFile.Filesize = (int)fi.Length;
ChecksumResultDetails crd = Tools.Instance.UpdateChecksum(file, true);
string chkType = string.Empty;
if (crd.TypeResult == ChecksumType.VAG_EDC15P_V41) chkType = "VAG EDC15P V4.1";
else if (crd.TypeResult == ChecksumType.VAG_EDC15P_V41V2) chkType = "VAG EDC15P V4.1v2";
else if (crd.TypeResult == ChecksumType.VAG_EDC15P_V41_2002) chkType = "VAG EDC15P V4.1 2002+";
newFile.ChecksumType = chkType;
newFile.ChecksumResult = crd.CalculationResult.ToString();
newFile.NumberChecksums = crd.NumberChecksumsTotal;
newFile.NumberChecksumsFail = crd.NumberChecksumsFail;
newFile.NumberChecksumsOk = crd.NumberChecksumsOk;
newFile.NumberMapsDetected = sc.Count;
string _message = string.Empty;
newFile.MapsOk = CheckMajorMapsPresent(sc, newFile.Filetype, out _message);
newFile.Messages = _message;
foreach (SymbolHelper sh in sc)
{
if (!sh.Varname.StartsWith("3D") && !sh.Varname.StartsWith("2D"))
{
newFile.NumberMapsRecognized++;
}
}
try
{
airmassResult.Currentfile = file;
airmassResult.Symbols = sc;
airmassResult.Currentfile_size = (int)fi.Length;
string additionalInfo = parser.ExtractInfo(allBytes);
airmassResult.NumberCylinders = pnc.GetNumberOfCylinders(info.EngineType, additionalInfo);
airmassResult.ECUType = info.EcuType;
PerformanceResults pr = airmassResult.Calculate(file, sc);
newFile.RealHP = pr.Horsepower;
newFile.RealTQ = pr.Torque;
}
catch (Exception)
{
}
detectedFiles.Add(newFile);
}
else if (file.ToUpper().EndsWith(".BIN") || file.ToUpper().EndsWith(".ORI"))
{
Console.WriteLine("Missed " + file);
// add it as well
if (checkEdit1.Checked)
{
ScannedFile newFile = new ScannedFile();
newFile.CarMake = "";
newFile.CarType = "";
newFile.EcuType = "Unknown";
newFile.EngineType = "";
newFile.FuellingType = "";
newFile.FuelType = "";
newFile.HP = 0;
newFile.PartNumber = "";
newFile.SoftwareID = "";
newFile.TQ = 0;
newFile.Filetype = EDCFileType.Unknown;
newFile.Filename = file;
newFile.Filesize = (int)fi.Length;
newFile.ChecksumType = "";
newFile.ChecksumResult = "";
newFile.NumberChecksums = 0;
newFile.NumberChecksumsFail = 0;
newFile.NumberChecksumsOk = 0;
newFile.NumberMapsDetected = 0;
newFile.MapsOk = false;
newFile.Messages = "";
newFile.NumberMapsRecognized = 0;
detectedFiles.Add(newFile);
}
}
}
}
gridControl1.DataSource = detectedFiles;
}
loading = false;
SetScanProgress("done", 100);
SetProgressVisibility(false);
this.Text = "Library builder";
simpleButton1.Text = "Close";
simpleButton2.Enabled = true;
Application.DoEvents();
}
private void btnAirmassResult_ItemClick(object sender, ItemClickEventArgs e)
{
DevExpress.XtraBars.Docking.DockPanel dockPanel;
if (CheckAllTablesAvailable())
{
dockManager1.BeginUpdate();
try
{
ctrlAirmassResult airmassResult = new ctrlAirmassResult();
airmassResult.Dock = DockStyle.Fill;
dockPanel = dockManager1.AddPanel(DevExpress.XtraBars.Docking.DockingStyle.Right);
dockPanel.Tag = Tools.Instance.m_currentfile;
dockPanel.ClosedPanel += new DevExpress.XtraBars.Docking.DockPanelEventHandler(dockPanel_ClosedPanel);
dockPanel.Text = "Airmass result viewer: " + Path.GetFileName(Tools.Instance.m_currentfile);
dockPanel.Width = 800;
airmassResult.onStartTableViewer += new ctrlAirmassResult.StartTableViewer(airmassResult_onStartTableViewer);
airmassResult.onClose += new ctrlAirmassResult.ViewerClose(airmassResult_onClose);
airmassResult.Currentfile = Tools.Instance.m_currentfile;
airmassResult.Symbols = Tools.Instance.m_symbols;
airmassResult.Currentfile_size = Tools.Instance.m_currentfilelength;
IEDCFileParser parser = Tools.Instance.GetParserForFile(Tools.Instance.m_currentfile, false);
byte[] allBytes = File.ReadAllBytes(Tools.Instance.m_currentfile);
string additionalInfo = parser.ExtractInfo(allBytes);
//GetNumberOfCylinders
string bpn = parser.ExtractBoschPartnumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(bpn, allBytes.Length);
airmassResult.NumberCylinders = pnc.GetNumberOfCylinders(info.EngineType, additionalInfo);
airmassResult.ECUType = info.EcuType;
airmassResult.Calculate(Tools.Instance.m_currentfile, Tools.Instance.m_symbols);
dockPanel.Controls.Add(airmassResult);
}
catch (Exception newdockE)
{
Console.WriteLine(newdockE.Message);
}
dockManager1.EndUpdate();
}
}
private void SaveAdditionalSymbols()
{
System.Data.DataTable dt = new System.Data.DataTable(Path.GetFileNameWithoutExtension(Tools.Instance.m_currentfile));
dt.Columns.Add("SYMBOLNAME");
dt.Columns.Add("SYMBOLNUMBER", Type.GetType("System.Int32"));
dt.Columns.Add("FLASHADDRESS", Type.GetType("System.Int32"));
dt.Columns.Add("DESCRIPTION");
byte[] allBytes = File.ReadAllBytes(Tools.Instance.m_currentfile);
string boschpartNumber = Tools.Instance.ExtractBoschPartnumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschpartNumber,allBytes.Length);
string checkstring = boschpartNumber + "_" + info.SoftwareID;
string xmlfilename = Tools.Instance.GetWorkingDirectory() + "\\repository\\" + Path.GetFileNameWithoutExtension(Tools.Instance.m_currentfile) + File.GetCreationTime(Tools.Instance.m_currentfile).ToString("yyyyMMddHHmmss") + checkstring + ".xml";
if (!Directory.Exists(Tools.Instance.GetWorkingDirectory() + "\\repository"))
{
Directory.CreateDirectory(Tools.Instance.GetWorkingDirectory() + "\\repository");
}
if (File.Exists(xmlfilename))
{
File.Delete(xmlfilename);
}
foreach (SymbolHelper sh in Tools.Instance.m_symbols)
{
if (sh.Userdescription != "")
{
dt.Rows.Add(sh.Varname, sh.Symbol_number, sh.Flash_start_address, sh.Userdescription);
}
}
dt.WriteXml(xmlfilename);
}
private void ParseDirectory(string folder)
{
if (Directory.Exists(folder))
{
string[] files = Directory.GetFiles(folder, "*.*", SearchOption.AllDirectories);
foreach (string file in files)
{
FileInfo fi = new FileInfo(file);
IEDCFileParser parser = Tools.Instance.GetParserForFile(file, false);
OpenFile(file, false);
byte[] allBytes = File.ReadAllBytes(file);
string boschnumber = parser.ExtractBoschPartnumber(allBytes);
string partnumber = parser.ExtractPartnumber(allBytes);
string softwareNumber = parser.ExtractSoftwareNumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschnumber, allBytes.Length);
UInt32 chks = AddChecksum(allBytes);
// determine peak trq&hp
if (info.EcuType.StartsWith("EDC15P"))
{
// export to the final folder
string destFile = Path.Combine(@"D:\Prive\ECU\audi\BinCollection\output", /*info.CarMake + "_" + info.EcuType + "_" +*/ boschnumber + "_" + softwareNumber + "_" + partnumber + "_" + chks.ToString("X8") + ".bin");
if (File.Exists(destFile)) Console.WriteLine("Double file: " + destFile);
else
{
File.Copy(file, destFile, false);
}
}
}
}
Console.WriteLine("Done");
}
private bool ImportXMLFile(string filename, SymbolCollection coll2load, bool ImportFromRepository)
{
bool retval = false;
SymbolTranslator st = new SymbolTranslator();
System.Data.DataTable dt = new System.Data.DataTable(Path.GetFileNameWithoutExtension(filename));
dt.Columns.Add("SYMBOLNAME");
dt.Columns.Add("SYMBOLNUMBER", Type.GetType("System.Int32"));
dt.Columns.Add("FLASHADDRESS", Type.GetType("System.Int32"));
dt.Columns.Add("DESCRIPTION");
if (ImportFromRepository)
{
byte[] allBytes = File.ReadAllBytes(filename);
string boschpartNumber = Tools.Instance.ExtractBoschPartnumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschpartNumber, allBytes.Length);
string checkstring = boschpartNumber + "_" + info.SoftwareID;
string xmlfilename = Tools.Instance.GetWorkingDirectory() + "\\repository\\" + Path.GetFileNameWithoutExtension(filename) + File.GetCreationTime(filename).ToString("yyyyMMddHHmmss") + checkstring + ".xml";
if (!Directory.Exists(Tools.Instance.GetWorkingDirectory() + "\\repository"))
{
Directory.CreateDirectory(Tools.Instance.GetWorkingDirectory() + "\\repository");
}
if (File.Exists(xmlfilename))
{
dt.ReadXml(xmlfilename);
retval = true;
}
}
else
{
string binname = GetFileDescriptionFromFile(filename);
if (binname != string.Empty)
{
dt = new System.Data.DataTable(binname);
dt.Columns.Add("SYMBOLNAME");
dt.Columns.Add("SYMBOLNUMBER", Type.GetType("System.Int32"));
dt.Columns.Add("FLASHADDRESS", Type.GetType("System.Int32"));
dt.Columns.Add("DESCRIPTION");
if (File.Exists(filename))
{
dt.ReadXml(filename);
retval = true;
}
}
}
foreach (SymbolHelper sh in coll2load)
{
foreach (DataRow dr in dt.Rows)
{
try
{
//if (dr["SYMBOLNAME"].ToString() == sh.Varname)
{
if (sh.Flash_start_address == Convert.ToInt32(dr["FLASHADDRESS"]))
{
sh.Userdescription = dr["DESCRIPTION"].ToString();
break;
}
}
}
catch (Exception E)
{
Console.WriteLine(E.Message);
}
}
}
return retval;
}
private SymbolCollection DetectMaps(string filename, out List<CodeBlock> newCodeBlocks, out List<AxisHelper> newAxisHelpers, bool showMessage, bool isPrimaryFile)
{
IEDCFileParser parser = Tools.Instance.GetParserForFile(filename, isPrimaryFile);
newCodeBlocks = new List<CodeBlock>();
newAxisHelpers = new List<AxisHelper>();
SymbolCollection newSymbols = new SymbolCollection();
if (parser != null)
{
byte[] allBytes = File.ReadAllBytes(filename);
string boschnumber = parser.ExtractBoschPartnumber(allBytes);
string softwareNumber = parser.ExtractSoftwareNumber(allBytes);
partNumberConverter pnc = new partNumberConverter();
ECUInfo info = pnc.ConvertPartnumber(boschnumber,allBytes.Length);
//MessageBox.Show("Car: " + info.CarMake + "\nECU:" + info.EcuType);
//1) Vw Hardware Number: 38906019GF, Vw System Type: 1,9l R4 EDC15P, Vw Software Number: SG 1434;
//2) Vw Hardware Number: 38906019LJ, Vw System Type: 1,9l R4 EDC15P, Vw Software Number: SG 5934.
if (!info.EcuType.StartsWith("EDC15P") && !info.EcuType.StartsWith("EDC15VM") && info.EcuType != string.Empty && showMessage)
{
frmInfoBox infobx = new frmInfoBox("No EDC15P/VM file [" + info.EcuType + "] " + Path.GetFileName(filename));
}
if (info.EcuType == string.Empty)
{
Console.WriteLine("partnumber " + info.PartNumber + " unknown " + filename);
}
if (isPrimaryFile)
{
string partNo = parser.ExtractPartnumber(allBytes);
partNo = Tools.Instance.StripNonAscii(partNo);
softwareNumber = Tools.Instance.StripNonAscii(softwareNumber);
barPartnumber.Caption = partNo + " " + softwareNumber;
barAdditionalInfo.Caption = info.PartNumber + " " + info.CarMake + " " + info.EcuType + " " + parser.ExtractInfo(allBytes);
}
newSymbols = parser.parseFile(filename, out newCodeBlocks, out newAxisHelpers);
newSymbols.SortColumn = "Flash_start_address";
newSymbols.SortingOrder = GenericComparer.SortOrder.Ascending;
newSymbols.Sort();
//parser.NameKnownMaps(allBytes, newSymbols, newCodeBlocks);
//parser.FindSVBL(allBytes, filename, newSymbols, newCodeBlocks);
/*SymbolTranslator strans = new SymbolTranslator();
foreach (SymbolHelper sh in newSymbols)
{
sh.Description = strans.TranslateSymbolToHelpText(sh.Varname);
}*/
// check for must have maps... if there are maps missing, report it
if (showMessage && (parser is EDC15PFileParser || parser is EDC15P6FileParser))
{
string _message = string.Empty;
if (MapsWithNameMissing("EGR", newSymbols)) _message += "EGR maps missing" + Environment.NewLine;
if (MapsWithNameMissing("SVBL", newSymbols)) _message += "SVBL missing" + Environment.NewLine;
if (MapsWithNameMissing("Torque limiter", newSymbols)) _message += "Torque limiter missing" + Environment.NewLine;
if (MapsWithNameMissing("Smoke limiter", newSymbols)) _message += "Smoke limiter missing" + Environment.NewLine;
//if (MapsWithNameMissing("IQ by MAF limiter", newSymbols)) _message += "IQ by MAF limiter missing" + Environment.NewLine;
if (MapsWithNameMissing("Injector duration", newSymbols)) _message += "Injector duration maps missing" + Environment.NewLine;
if (MapsWithNameMissing("Start of injection", newSymbols)) _message += "Start of injection maps missing" + Environment.NewLine;
if (MapsWithNameMissing("N75 duty cycle", newSymbols)) _message += "N75 duty cycle map missing" + Environment.NewLine;
if (MapsWithNameMissing("Inverse driver wish", newSymbols)) _message += "Inverse driver wish map missing" + Environment.NewLine;
if (MapsWithNameMissing("Boost target map", newSymbols)) _message += "Boost target map missing" + Environment.NewLine;
if (MapsWithNameMissing("SOI limiter", newSymbols)) _message += "SOI limiter missing" + Environment.NewLine;
if (MapsWithNameMissing("Driver wish", newSymbols)) _message += "Driver wish map missing" + Environment.NewLine;
if (MapsWithNameMissing("Boost limit map", newSymbols)) _message += "Boost limit map missing" + Environment.NewLine;
if (MapsWithNameMissing("MAF correction", newSymbols)) _message += "MAF correction map missing" + Environment.NewLine;
if (MapsWithNameMissing("MAF linearization", newSymbols)) _message += "MAF linearization map missing" + Environment.NewLine;
if (MapsWithNameMissing("MAP linearization", newSymbols)) _message += "MAP linearization map missing" + Environment.NewLine;
if (_message != string.Empty)
{
frmInfoBox infobx = new frmInfoBox(_message);
}
}
if (isPrimaryFile)
{
barSymCount.Caption = newSymbols.Count.ToString() + " symbols";
if (MapsWithNameMissing("Launch control map", newSymbols))
{
btnActivateLaunchControl.Enabled = true;
}
else
{
btnActivateLaunchControl.Enabled = false;
}
btnActivateSmokeLimiters.Enabled = false;
try
{
if (Tools.Instance.codeBlockList.Count > 0)
{
if ((GetMapCount("Smoke limiter", newSymbols) / Tools.Instance.codeBlockList.Count) == 1)
{
btnActivateSmokeLimiters.Enabled = true;
}
else
{
btnActivateSmokeLimiters.Enabled = false;
}
}
}
catch (Exception)
{
}
}
}
return newSymbols;
}