void SliceEv(Slicer.eSliceEvent ev, int layer, int totallayers, SliceFile sf)
{
String path = "";
String fileName = "";
switch (ev)
{
case Slicer.eSliceEvent.eSliceStarted:
break;
case Slicer.eSliceEvent.eLayerSliced:
break;
case Slicer.eSliceEvent.eSliceCompleted: // this all needs to be changed....
m_slicefile = sf;
//generate the GCode
m_gcode = GCodeGenerator.Generate(m_slicefile, m_printerinfo);
path = SliceFile.GetSliceFilePath(m_slicefile.modelname);
fileName = Path.GetFileNameWithoutExtension(m_slicefile.modelname) + ".gcode";
//see if we're exporting this to a zip file
if (sf.m_config.m_exportopt.Contains("ZIP") && sf.m_config.export)
{
// open the existing zip file
//store the gcode
Stream stream = new MemoryStream(System.Text.Encoding.ASCII.GetBytes(m_gcode.RawGCode));
String zpath = path + ".zip";
if (!Utility.StoreInZip(zpath, fileName, stream))
{
DebugLogger.Instance().LogError("Could not store GCode in Zip " + zpath);
}
}
else // or just to the disk
{
String sdn = path + UVDLPApp.m_pathsep + fileName;
SaveGCode(sdn);
}
//save the slicer object for later too
//save the slice file
// UVDLPApp.Instance().m_slicefile.Save(path + UVDLPApp.m_pathsep + fn + ".sliced");
break;
case Slicer.eSliceEvent.eSliceCancelled:
DebugLogger.Instance().LogRecord("Slicing Cancelled");
break;
}
}
void SliceEv(Slicer.eSliceEvent ev, int layer, int totallayers, SliceFile sf)
{
// String path = "";
// String fileName = "";
switch (ev)
{
case Slicer.eSliceEvent.eSliceStarted:
break;
case Slicer.eSliceEvent.eLayerSliced:
break;
case Slicer.eSliceEvent.eSliceCompleted: // this all needs to be changed....
m_slicefile = sf;
//generate the GCode
m_gcode = GCodeGenerator.Generate(m_slicefile, m_printerinfo);
//we only need the file name of the gcode if we're saving it somewhere...
//see if we're exporting this to a zip file
//if (sf.m_config.m_exportopt.Contains("ZIP") && sf.m_config.export)
if (sf.m_config.export)
{
// open the existing scene file
//store the gcode
MemoryStream stream = new MemoryStream(System.Text.Encoding.ASCII.GetBytes(m_gcode.RawGCode));
String gcn = Path.GetFileNameWithoutExtension(UVDLPApp.Instance().SceneFileName) + ".gcode";
//SceneFile.Instance().RemoveExistingGCode(UVDLPApp.Instance().SceneFileName);
SceneFile.Instance().RemoveResourcesFromFile(UVDLPApp.Instance().SceneFileName, "GCode", ".gcode");
SceneFile.Instance().AddGCodeToFile(UVDLPApp.Instance().SceneFileName, stream, gcn);
}
//save the slicer object for later too
//save the slice file
// UVDLPApp.Instance().m_slicefile.Save(path + UVDLPApp.m_pathsep + fn + ".sliced");
break;
case Slicer.eSliceEvent.eSliceCancelled:
DebugLogger.Instance().LogRecord("Slicing Cancelled");
break;
}
}
void SliceEv(Slicer.eSliceEvent ev, int layer, int totallayers)
{
String path = "";
switch (ev)
{
case Slicer.eSliceEvent.eSliceStarted:
// if we're exporting images
if (m_buildparms.exportimages)
{
// get the model name
String modelname = m_obj.m_fullname;
// strip off the file extension
path = Path.GetDirectoryName(modelname);
path += UVDLPApp.m_pathsep;
path += Path.GetFileNameWithoutExtension(modelname); // strip off the file extension
if (!Directory.Exists(path)) // check and see if a directory of that name exists,
{
Directory.CreateDirectory(path); // if not, create it
}
}
break;
case Slicer.eSliceEvent.eLayerSliced:
//save the rendered image slice
//render the slice
if (m_buildparms.exportimages)
{
// get the model name
String modelname = m_obj.m_fullname;
// strip off the file extension
path = Path.GetDirectoryName(modelname);
path += UVDLPApp.m_pathsep;
path += Path.GetFileNameWithoutExtension(modelname); // strip off the file extension
Bitmap bmp = null;
String imagename = path + m_pathsep + Path.GetFileNameWithoutExtension(modelname) + String.Format("{0:0000}", layer) + ".png";
bmp = UVDLPApp.Instance().m_slicefile.RenderSlice(layer);
bmp.Save(imagename);
}
break;
case Slicer.eSliceEvent.eSliceCompleted:
m_gcode = GCodeGenerator.Generate(m_slicefile, m_printerinfo);
/*
* //get the path of the current object file
* path = Path.GetDirectoryName(m_obj.m_fullname);
* string fn = Path.GetFileNameWithoutExtension(m_obj.m_fullname);
* if (!UVDLPApp.Instance().m_gcode.Save(path + UVDLPApp.m_pathsep + fn + ".gcode"))
* {
* DebugLogger.Instance().LogRecord("Cannot save GCode File " + path + m_pathsep + fn + ".gcode");
* }
* */
SaveGCode();
break;
case Slicer.eSliceEvent.eSliceCancelled:
DebugLogger.Instance().LogRecord("Slicing Cancelled");
break;
}
}
void SliceEv(Slicer.eSliceEvent ev, int layer, int totallayers)
{
String path = "";
switch (ev)
{
case Slicer.eSliceEvent.eSliceStarted:
// if we're exporting images
if (m_buildparms.exportimages)
{
m_zip = new ZipFile();
// get the model name, could be scene....
String modelname = m_selectedobject.m_fullname;
// strip off the file extension
path = Path.GetDirectoryName(modelname);
path += UVDLPApp.m_pathsep;
path += Path.GetFileNameWithoutExtension(modelname); // strip off the file extension
if (!Directory.Exists(path)) // check and see if a directory of that name exists,
{
Directory.CreateDirectory(path); // if not, create it
}
}
break;
case Slicer.eSliceEvent.eLayerSliced:
//save the rendered image slice
//render the slice
if (m_buildparms.exportimages)
{
// get the model name
String modelname = m_selectedobject.m_fullname;
// strip off the file extension
path = Path.GetDirectoryName(modelname);
path += UVDLPApp.m_pathsep;
path += Path.GetFileNameWithoutExtension(modelname); // strip off the file extension
Bitmap bmp = null;
String imname = Path.GetFileNameWithoutExtension(modelname) + String.Format("{0:0000}", layer) + ".png";
String imagename = path + m_pathsep + imname;
bmp = UVDLPApp.Instance().m_slicefile.RenderSlice(layer);
// bmp.Save(imagename);
// create a memory stream for this to save into
MemoryStream ms = new MemoryStream();
bmp.Save(ms, ImageFormat.Png);
ms.Seek(0, SeekOrigin.Begin); // seek back to beginning
m_zip.AddEntry(imname, ms);
}
break;
case Slicer.eSliceEvent.eSliceCompleted:
// save the zip file full of images
if (m_buildparms.exportimages)
{
String modelname = m_selectedobject.m_fullname;
// strip off the file extension
path = Path.GetDirectoryName(modelname);
path += UVDLPApp.m_pathsep;
path += Path.GetFileNameWithoutExtension(modelname); // strip off the file extension
path += ".zip";
m_zip.Save(path);
}
m_gcode = GCodeGenerator.Generate(m_slicefile, m_printerinfo);
//get the path of the current object file
path = Path.GetDirectoryName(m_selectedobject.m_fullname);
string fn = Path.GetFileNameWithoutExtension(m_selectedobject.m_fullname);
/*
* if (!UVDLPApp.Instance().m_gcode.Save(path + UVDLPApp.m_pathsep + fn + ".gcode"))
* {
* DebugLogger.Instance().LogRecord("Cannot save GCode File " + path + m_pathsep + fn + ".gcode");
* }
*/
SaveGCode(path + UVDLPApp.m_pathsep + fn + ".gcode");
break;
case Slicer.eSliceEvent.eSliceCancelled:
DebugLogger.Instance().LogRecord("Slicing Cancelled");
break;
}
}