示例#1
0
        private void OnCommandClick(Commands_e spec)
        {
            try
            {
                switch (spec)
                {
                case Commands_e.OpenDoc:

                    var cutLists = (Application.Documents.Active as ISwPart).Configurations.Active.CutLists.ToArray();

                    //(Application.Documents.Active.Model as AssemblyDoc).FileDropPreNotify += SwAddInSample_FileDropPreNotify;
                    var doc = Application.Documents.PreCreate <IXDocument>();
                    doc.Path  = @"C:\Users\artem\OneDrive\xCAD\TestData\Assembly2\TopAssem.SLDASM";
                    doc.State = DocumentState_e.Rapid;
                    doc.Commit();
                    break;

                case Commands_e.ShowPmPage:
                    m_Data = new PmpData();
                    m_Data.ItemsSourceComboBox = "Y";
                    m_Page.Show(m_Data);
                    m_Page.DataChanged += OnPageDataChanged;
                    break;

                case Commands_e.ShowToggleGroupPage:
                    m_ToggleGroupPage.Show(m_TogglePageData ?? (m_TogglePageData = new ToggleGroupPmpData()));
                    break;

                case Commands_e.ShowPmPageMacroFeature:
                    m_MacroFeatPmpData = new PmpMacroFeatData()
                    {
                        Text = "ABC", Number = 0.1
                    };
                    m_MacroFeatPage.Show(m_MacroFeatPmpData);
                    break;

                case Commands_e.RecordView:
                    var view = (Application.Documents.Active as IXDocument3D).ModelViews.Active;

                    if (m_ViewTransform == null)
                    {
                        m_ViewTransform = view.Transform;
                        Application.Sw.SendMsgToUser("Recorded");
                    }
                    else
                    {
                        view.Transform = m_ViewTransform;
                        view.Update();
                        m_ViewTransform = null;
                        Application.Sw.SendMsgToUser("Restored");
                    }
                    break;

                case Commands_e.CreateBox:
                    Application.Documents.Active.Features.CreateCustomFeature <BoxMacroFeatureEditor, BoxMacroFeatureData, BoxData>();
                    break;

                case Commands_e.WatchDimension:
                    WatchDimension();
                    break;

                case Commands_e.WatchCustomProperty:
                    WatchCustomProperty();
                    break;

                case Commands_e.CreateModelView:
                    this.CreateDocumentTabWpf <WpfUserControl>(Application.Documents.Active);
                    //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                    //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                    break;

                case Commands_e.CreateFeatMgrView:
                    m_FeatMgrTab            = this.CreateFeatureManagerTab <WpfUserControl>(Application.Documents.Active);
                    m_FeatMgrTab.Activated += OnFeatureManagerTabActivated;

                    foreach (var comp in Application.Documents.Active.Selections.OfType <IXComponent>())
                    {
                        this.CreateFeatureManagerTab <WpfUserControl>((ISwDocument)comp.ReferencedDocument);
                    }

                    //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                    //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                    break;

                case Commands_e.CreatePopup:
                    //var winForm = this.CreatePopupWinForm<WinForm>();
                    //winForm.Show(true);
                    m_Window?.Close();
                    m_Window         = this.CreatePopupWpfWindow <WpfWindow>();
                    m_Window.Closed += OnWindowClosed;
                    m_Window.Show();
                    break;

                case Commands_e.CreateTaskPane:
                    var tp = this.CreateTaskPaneWpf <WpfUserControl, TaskPaneButtons_e>();
                    tp.ButtonClick += OnButtonClick;
                    //this.CreateTaskPaneWinForm<WinUserControl>();
                    //this.CreateTaskPaneWinForm<ComUserControl>();
                    break;

                case Commands_e.HandleSelection:
                    Application.Documents.Active.Selections.NewSelection   += OnNewSelection;
                    Application.Documents.Active.Selections.ClearSelection += OnClearSelection;
                    break;

                case Commands_e.ShowTooltip:
                    var modelView = (Application.Documents.Active as IXDocument3D).ModelViews.Active;
                    var pt        = new System.Drawing.Point(modelView.ScreenRect.Left, modelView.ScreenRect.Top);
                    Application.ShowTooltip(new MyTooltipSpec("xCAD", "Test Message", pt, TooltipArrowPosition_e.LeftTop));
                    break;

                case Commands_e.ShowPmpComboBox:
                    m_PmpComboBoxData = new PmpComboBoxData();
                    m_ComboBoxPage.Show(m_PmpComboBoxData);
                    break;

                case Commands_e.GetMassPrps:

                    var visOnly       = true;
                    var relToCoordSys = "Coordinate System1";
                    var userUnits     = true;

                    var massPrps = ((ISwAssembly)Application.Documents.Active).PreCreateMassProperty();
                    massPrps.Scope       = Application.Documents.Active.Selections.OfType <IXComponent>().ToArray();
                    massPrps.VisibleOnly = visOnly;
                    massPrps.UserUnits   = userUnits;
                    if (!string.IsNullOrEmpty(relToCoordSys))
                    {
                        massPrps.RelativeTo = ((ISwCoordinateSystem)Application.Documents.Active.Features[relToCoordSys]).Transform;
                    }
                    massPrps.Commit();
                    var cog      = massPrps.CenterOfGravity;
                    var dens     = massPrps.Density;
                    var mass     = massPrps.Mass;
                    var moi      = massPrps.MomentOfInertia;
                    var paoi     = massPrps.PrincipalAxesOfInertia;
                    var pmoi     = massPrps.PrincipalMomentOfInertia;
                    var surfArea = massPrps.SurfaceArea;
                    var volume   = massPrps.Volume;
                    break;
                }
            }
            catch
            {
                Debug.Assert(false);
            }
        }
示例#2
0
        private void OnCommandClick(Commands_e spec)
        {
            switch (spec)
            {
            case Commands_e.OpenDoc:
                var doc = Application.Documents.Open(@"C:\Users\artem\OneDrive\Attribution\SwModels\Annotation.sldprt");
                break;

            case Commands_e.ShowPmPage:
                m_Data = new PmpData();
                m_Page.Show(m_Data);
                m_Page.DataChanged += OnPageDataChanged;
                break;

            case Commands_e.ShowPmPageMacroFeature:
                m_MacroFeatPmpData = new PmpMacroFeatData()
                {
                    Text = "ABC", Number = 0.1
                };
                m_MacroFeatPage.Show(m_MacroFeatPmpData);
                break;

            case Commands_e.RecordView:
                var view = (Application.Documents.Active as IXDocument3D).ModelViews.Active;

                if (m_ViewTransform == null)
                {
                    m_ViewTransform = view.Transform;
                    Application.Sw.SendMsgToUser("Recorded");
                }
                else
                {
                    view.Transform = m_ViewTransform;
                    view.Update();
                    m_ViewTransform = null;
                    Application.Sw.SendMsgToUser("Restored");
                }
                break;

            case Commands_e.CreateBox:
                Application.Documents.Active.Features.CreateCustomFeature <BoxMacroFeatureEditor, BoxData, BoxData>();
                break;

            case Commands_e.WatchDimension:
                WatchDimension();
                break;

            case Commands_e.WatchCustomProperty:
                WatchCustomProperty();
                break;

            case Commands_e.CreateModelView:
                this.CreateDocumentTabWpf <WpfUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                break;

            case Commands_e.CreateFeatMgrView:
                this.CreateFeatureManagerTab <WpfUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                break;

            case Commands_e.CreatePopup:
                //var winForm = this.CreatePopupWinForm<WinForm>();
                //winForm.Show(true);
                m_Window?.Close();
                m_Window         = this.CreatePopupWpfWindow <WpfWindow>();
                m_Window.Closed += OnWindowClosed;
                m_Window.Show();
                break;

            case Commands_e.CreateTaskPane:
                var tp = this.CreateTaskPaneWpf <WpfUserControl, TaskPaneButtons_e>();
                tp.ButtonClick += OnButtonClick;
                //this.CreateTaskPaneWinForm<WinUserControl>();
                //this.CreateTaskPaneWinForm<ComUserControl>();
                break;

            case Commands_e.HandleSelection:
                Application.Documents.Active.Selections.NewSelection   += OnNewSelection;
                Application.Documents.Active.Selections.ClearSelection += OnClearSelection;
                break;
            }
        }
示例#3
0
        private void OnCommandClick(Commands_e spec)
        {
            switch (spec)
            {
            case Commands_e.OpenDoc:
                (Application.Documents.Active.Model as AssemblyDoc).FileDropPreNotify += SwAddInSample_FileDropPreNotify;
                var doc = Application.Documents.Open(@"C:\Users\artem\OneDrive\Attribution\SwModels\Annotation.sldprt");
                break;

            case Commands_e.ShowPmPage:
                m_Data = new PmpData();
                m_Page.Show(m_Data);
                m_Page.DataChanged += OnPageDataChanged;
                break;

            case Commands_e.ShowToggleGroupPage:
                m_ToggleGroupPage.Show(m_TogglePageData ?? (m_TogglePageData = new ToggleGroupPmpData()));
                break;

            case Commands_e.ShowPmPageMacroFeature:
                m_MacroFeatPmpData = new PmpMacroFeatData()
                {
                    Text = "ABC", Number = 0.1
                };
                m_MacroFeatPage.Show(m_MacroFeatPmpData);
                break;

            case Commands_e.RecordView:
                var view = (Application.Documents.Active as IXDocument3D).ModelViews.Active;

                if (m_ViewTransform == null)
                {
                    m_ViewTransform = view.Transform;
                    Application.Sw.SendMsgToUser("Recorded");
                }
                else
                {
                    view.Transform = m_ViewTransform;
                    view.Update();
                    m_ViewTransform = null;
                    Application.Sw.SendMsgToUser("Restored");
                }
                break;

            case Commands_e.CreateBox:
                Application.Documents.Active.Features.CreateCustomFeature <BoxMacroFeatureEditor, BoxData, BoxData>();
                break;

            case Commands_e.WatchDimension:
                WatchDimension();
                break;

            case Commands_e.WatchCustomProperty:
                WatchCustomProperty();
                break;

            case Commands_e.CreateModelView:
                this.CreateDocumentTabWpf <WpfUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                break;

            case Commands_e.CreateFeatMgrView:
                m_FeatMgrTab            = this.CreateFeatureManagerTab <WpfUserControl>(Application.Documents.Active);
                m_FeatMgrTab.Activated += OnFeatureManagerTabActivated;

                foreach (var comp in Application.Documents.Active.Selections.OfType <IXComponent>())
                {
                    this.CreateFeatureManagerTab <WpfUserControl>((ISwDocument)comp.Document);
                }

                //this.CreateDocumentTabWinForm<WinUserControl>(Application.Documents.Active);
                //this.CreateDocumentTabWinForm<ComUserControl>(Application.Documents.Active);
                break;

            case Commands_e.CreatePopup:
                //var winForm = this.CreatePopupWinForm<WinForm>();
                //winForm.Show(true);
                m_Window?.Close();
                m_Window         = this.CreatePopupWpfWindow <WpfWindow>();
                m_Window.Closed += OnWindowClosed;
                m_Window.Show();
                break;

            case Commands_e.CreateTaskPane:
                var tp = this.CreateTaskPaneWpf <WpfUserControl, TaskPaneButtons_e>();
                tp.ButtonClick += OnButtonClick;
                //this.CreateTaskPaneWinForm<WinUserControl>();
                //this.CreateTaskPaneWinForm<ComUserControl>();
                break;

            case Commands_e.HandleSelection:
                Application.Documents.Active.Selections.NewSelection   += OnNewSelection;
                Application.Documents.Active.Selections.ClearSelection += OnClearSelection;
                break;

            case Commands_e.ShowTooltip:
                var modelView = (Application.Documents.Active as IXDocument3D).ModelViews.Active;
                var pt        = new System.Drawing.Point(modelView.ScreenRect.Left, modelView.ScreenRect.Top);
                Application.ShowTooltip(new MyTooltipSpec("xCAD", "Test Message", pt, TooltipArrowPosition_e.LeftTop));
                break;
            }
        }