public string UpdateFlow( SMT.Workflow.Common.Model.FLOW_FLOWRECORDDETAIL_T entity)
{
FlowBLL bll = new FlowBLL();
bll.UpdateFlowDetailRecord( entity, "", "");
return "";
}
public void AddConsultation( SMT.Workflow.Common.Model.FLOW_CONSULTATION_T flowConsultation, SubmitData submitData)
{
if (strIsFlowEngine.ToLower() == "true")
{
try
{
#region 记录日志
SMT.Workflow.Common.Model.FLOW_CONSULTATION_T entity = flowConsultation;
StringBuilder sb = new StringBuilder();
sb.AppendLine("FLOW_CONSULTATION_T entity= new FLOW_CONSULTATION_T();");//
sb.AppendLine("entity.CONSULTATIONID = \"" + entity.CONSULTATIONID + "\";");//
sb.AppendLine("entity.FLOWRECORDDETAILID = \"" + (entity.FLOW_FLOWRECORDDETAIL_T == null ? "" : entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDDETAILID) + "\";");
sb.AppendLine("entity.CONSULTATIONUSERID = \"" + entity.CONSULTATIONUSERID + "\";");
sb.AppendLine("entity.CONSULTATIONUSERNAME = \"" + entity.CONSULTATIONUSERNAME + "\";");
sb.AppendLine("entity.CONSULTATIONCONTENT =\"" + entity.CONSULTATIONCONTENT + "\";");
sb.AppendLine("entity.CONSULTATIONDATE = \"" + entity.CONSULTATIONDATE + "\";");
sb.AppendLine("entity.REPLYUSERID = \"" + entity.REPLYUSERID + "\";");
sb.AppendLine("entity.REPLYUSERNAME = \"" + entity.REPLYUSERNAME + "\";");
sb.AppendLine("entity.REPLYCONTENT = \"" + entity.REPLYCONTENT + "\";");
sb.AppendLine("entity.REPLYDATE = \"" + entity.REPLYDATE + "\";");
sb.AppendLine("entity.FLAG = \"" + entity.FLAG + "\";");//0未回复，1回复
sb.AppendLine("FLOW_FLOWRECORDDETAIL_T model=new FLOW_FLOWRECORDDETAIL_T();");
sb.AppendLine(" model.FLOWRECORDDETAILID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDDETAILID + "\";");
//sb.AppendLine(" model.FLOWRECORDMASTERID=\""+entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDMASTERID+"\";");
sb.AppendLine(" model.STATECODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.STATECODE + "\";");
sb.AppendLine(" model.PARENTSTATEID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.PARENTSTATEID + "\";");
sb.AppendLine(" model.CONTENT=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CONTENT + "\";");
sb.AppendLine(" model.CHECKSTATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CHECKSTATE + "\";//同意：1，不同意:0 ,未处理:2，会签同意7，会签不同意8");
sb.AppendLine(" model.FLAG=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLAG + "\";//已审批：1，未审批:0");
sb.AppendLine(" model.CREATEUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEUSERID + "\";");
sb.AppendLine(" model.CREATEUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEUSERNAME + "\";");
sb.AppendLine(" model.CREATECOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATECOMPANYID + "\";");
sb.AppendLine(" model.CREATEDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEDEPARTMENTID + "\";");
sb.AppendLine(" model.CREATEPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEPOSTID + "\";");
sb.AppendLine(" model.CREATEDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEDATE + "\";");
sb.AppendLine(" model.EDITUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITUSERID + "\";");
sb.AppendLine(" model.EDITUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITUSERNAME + "\";");
sb.AppendLine(" model.EDITCOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITCOMPANYID + "\";");
sb.AppendLine(" model.EDITDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITDEPARTMENTID + "\";");
sb.AppendLine(" model.EDITPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITPOSTID + "\";");
sb.AppendLine(" model.EDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITDATE + "\";");
sb.AppendLine(" model.AGENTUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTUSERID + "\";");
sb.AppendLine(" model.AGENTERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTERNAME + "\";");
sb.AppendLine(" model.AGENTEDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTEDITDATE + "\";");
sb.AppendLine(" entity.FLOW_FLOWRECORDDETAIL_T = model;");
sb.AppendLine("FLOW_FLOWRECORDMASTER_T eentity=new FLOW_FLOWRECORDMASTER_T();");
sb.AppendLine(" eentity.FLOWRECORDMASTERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWRECORDMASTERID + "\";");
sb.AppendLine(" eentity.INSTANCEID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.INSTANCEID + "\";");
sb.AppendLine(" eentity.FLOWSELECTTYPE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWSELECTTYPE + "\";//0:固定流程，1：自选流程");
sb.AppendLine(" eentity.MODELCODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.MODELCODE + "\";");
sb.AppendLine(" eentity.FLOWCODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWCODE + "\";");
sb.AppendLine(" eentity.FORMID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "\";");
sb.AppendLine(" eentity.FLOWTYPE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWTYPE + "\";//0:审批流程，1：任务流程");
sb.AppendLine(" eentity.CHECKSTATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CHECKSTATE + "\";//1:审批中，2：审批通过，3审批不通过，5撤销(为与字典保持一致)");
sb.AppendLine(" eentity.CREATEUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEUSERID + "\";");
sb.AppendLine(" eentity.CREATEUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEUSERNAME + "\";");
sb.AppendLine(" eentity.CREATECOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID + "\";");
sb.AppendLine(" eentity.CREATEDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEDEPARTMENTID + "\";");
sb.AppendLine(" eentity.CREATEPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEPOSTID + "\";");
sb.AppendLine(" eentity.CREATEDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEDATE + "\";");
sb.AppendLine(" eentity.EDITUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITUSERID + "\";");
sb.AppendLine(" eentity.EDITUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITUSERNAME + "\";");
sb.AppendLine(" eentity.EDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITDATE + "\";");
sb.AppendLine(" eentity.ACTIVEROLE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.ACTIVEROLE + "\";");
sb.AppendLine(" eentity.BUSINESSOBJECT=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT + "\";");
sb.AppendLine(" eentity.KPITIMEXML=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.KPITIMEXML + "\";");
sb.AppendLine(" entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T = eentity;");
Tracer.Debug("流程引擎的XML数据"+ "SubimtFlow入口处 进行咨询: FormID=" + submitData.FormID + ";ModelCode=" + submitData.ModelCode + " \r\n FLOW_CONSULTATION_T 实体:\r\n" + sb.ToString());
LogSubmitData(submitData);
#endregion
flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T =
FlowBLL.GetFLOW_FLOWRECORDMASTER_T( flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWRECORDMASTERID);
//FlowEngineService.EngineWcfGlobalFunctionClient FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
//FlowEngineService.CustomUserMsg[] cs = new FlowEngineService.CustomUserMsg[1];
//FlowEngineService.CustomUserMsg cu = new FlowEngineService.CustomUserMsg();
//cu.FormID = flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID;
//cu.UserID = flowConsultation.REPLYUSERID;
//cs[0] = cu;
List<CustomUserMsg> UserAndForm = new List<CustomUserMsg>();
CustomUserMsg cu = new CustomUserMsg();
cu.FormID = flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID;
cu.UserID = flowConsultation.REPLYUSERID;
UserAndForm.Add(cu);
ModelInfo modelinfo = FlowBLL.GetSysCodeByModelCode( submitData.ModelCode);
MessageData tmpMessageData = new MessageData("Flow", modelinfo.SysCode,
flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID,
submitData.ModelCode, modelinfo.ModelName, submitData.FormID, flowConsultation.FLOW_FLOWRECORDDETAIL_T.STATECODE, flowConsultation.FLOW_FLOWRECORDDETAIL_T.CHECKSTATE, "", "", "", "");
FlowBLL flowBLL = new FlowBLL();
StringBuilder FlowResultXml = flowBLL.BuildMessageData(tmpMessageData);
//FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
//log = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
if (!string.IsNullOrEmpty(flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
{
submitData.XML = flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
}
//bool b = FlowEngine.FlowConsultati(cs, "", FlowResultXml.ToString(), submitData.XML);
EnginFlowBLL efbll = new EnginFlowBLL();
bool b = efbll.FlowConsultati( UserAndForm, "", FlowResultXml.ToString(), submitData.XML);
if (!b)
{
Tracer.Debug("发送咨询失败：FormID" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID
+ "\n\r submitData.XML:" + submitData.XML);
}
FlowBLL bll = new FlowBLL();
bll.AddConsultation( flowConsultation);
}
catch (Exception ex)
{
Tracer.Debug("发送咨询出错: FORMID=" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "异常信息:\r\n" + ex.InnerException + ex.Message);
throw ex;
}
finally
{
}
}
}
/// <summary>
/// 检测用户是否有未处理的单据
/// </summary>
/// <param name="UserID"></param>
/// <returns></returns>
public string IsExistFlowDataByUserID(string UserID, string PostID)
{
//OracleConnection con = ADOHelper.GetOracleConnection();
try
{
FlowBLL Flow = new FlowBLL();
return Flow.IsExistFlowDataByUserID( UserID, PostID);
}
catch (Exception ex)
{
Tracer.Debug("IsExistFlowDataByUserID:" + UserID + " Ex:" + ex.Message);
throw ex;
}
}
public void ReplyConsultation( SMT.Workflow.Common.Model.FLOW_CONSULTATION_T flowConsultation, SubmitData submitData)
{
if (strIsFlowEngine.ToLower() == "true")
{
try
{
#region 记录日志
SMT.Workflow.Common.Model.FLOW_CONSULTATION_T entity = flowConsultation;
StringBuilder sb = new StringBuilder();
sb.AppendLine("FLOW_CONSULTATION_T entity= new FLOW_CONSULTATION_T();");//
sb.AppendLine("entity.CONSULTATIONID = \"" + entity.CONSULTATIONID + "\";");//
sb.AppendLine("entity.FLOWRECORDDETAILID = \"" + (entity.FLOW_FLOWRECORDDETAIL_T == null ? "" : entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDDETAILID) + "\";");
sb.AppendLine("entity.CONSULTATIONUSERID = \"" + entity.CONSULTATIONUSERID + "\";");
sb.AppendLine("entity.CONSULTATIONUSERNAME = \"" + entity.CONSULTATIONUSERNAME + "\";");
sb.AppendLine("entity.CONSULTATIONCONTENT =\"" + entity.CONSULTATIONCONTENT + "\";");
sb.AppendLine("entity.CONSULTATIONDATE = \"" + entity.CONSULTATIONDATE + "\";");
sb.AppendLine("entity.REPLYUSERID = \"" + entity.REPLYUSERID + "\";");
sb.AppendLine("entity.REPLYUSERNAME = \"" + entity.REPLYUSERNAME + "\";");
sb.AppendLine("entity.REPLYCONTENT = \"" + entity.REPLYCONTENT + "\";");
sb.AppendLine("entity.REPLYDATE = \"" + entity.REPLYDATE + "\";");
sb.AppendLine("entity.FLAG = \"" + entity.FLAG + "\";");//0未回复，1回复
sb.AppendLine("FLOW_FLOWRECORDDETAIL_T model=new FLOW_FLOWRECORDDETAIL_T();");
sb.AppendLine(" model.FLOWRECORDDETAILID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDDETAILID + "\";");
//sb.AppendLine(" model.FLOWRECORDMASTERID=\""+entity.FLOW_FLOWRECORDDETAIL_T.FLOWRECORDMASTERID+"\";");
sb.AppendLine(" model.STATECODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.STATECODE + "\";");
sb.AppendLine(" model.PARENTSTATEID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.PARENTSTATEID + "\";");
sb.AppendLine(" model.CONTENT=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CONTENT + "\";");
sb.AppendLine(" model.CHECKSTATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CHECKSTATE + "\";//同意：1，不同意:0 ,未处理:2，会签同意7，会签不同意8");
sb.AppendLine(" model.FLAG=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLAG + "\";//已审批：1，未审批:0");
sb.AppendLine(" model.CREATEUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEUSERID + "\";");
sb.AppendLine(" model.CREATEUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEUSERNAME + "\";");
sb.AppendLine(" model.CREATECOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATECOMPANYID + "\";");
sb.AppendLine(" model.CREATEDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEDEPARTMENTID + "\";");
sb.AppendLine(" model.CREATEPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEPOSTID + "\";");
sb.AppendLine(" model.CREATEDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.CREATEDATE + "\";");
sb.AppendLine(" model.EDITUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITUSERID + "\";");
sb.AppendLine(" model.EDITUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITUSERNAME + "\";");
sb.AppendLine(" model.EDITCOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITCOMPANYID + "\";");
sb.AppendLine(" model.EDITDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITDEPARTMENTID + "\";");
sb.AppendLine(" model.EDITPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITPOSTID + "\";");
sb.AppendLine(" model.EDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.EDITDATE + "\";");
sb.AppendLine(" model.AGENTUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTUSERID + "\";");
sb.AppendLine(" model.AGENTERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTERNAME + "\";");
sb.AppendLine(" model.AGENTEDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.AGENTEDITDATE + "\";");
sb.AppendLine(" entity.FLOW_FLOWRECORDDETAIL_T = model;");
sb.AppendLine("FLOW_FLOWRECORDMASTER_T eentity=new FLOW_FLOWRECORDMASTER_T();");
sb.AppendLine(" eentity.FLOWRECORDMASTERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWRECORDMASTERID + "\";");
sb.AppendLine(" eentity.INSTANCEID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.INSTANCEID + "\";");
sb.AppendLine(" eentity.FLOWSELECTTYPE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWSELECTTYPE + "\";//0:固定流程，1：自选流程");
sb.AppendLine(" eentity.MODELCODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.MODELCODE + "\";");
sb.AppendLine(" eentity.FLOWCODE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWCODE + "\";");
sb.AppendLine(" eentity.FORMID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "\";");
sb.AppendLine(" eentity.FLOWTYPE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWTYPE + "\";//0:审批流程，1：任务流程");
sb.AppendLine(" eentity.CHECKSTATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CHECKSTATE + "\";//1:审批中，2：审批通过，3审批不通过，5撤销(为与字典保持一致)");
sb.AppendLine(" eentity.CREATEUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEUSERID + "\";");
sb.AppendLine(" eentity.CREATEUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEUSERNAME + "\";");
sb.AppendLine(" eentity.CREATECOMPANYID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID + "\";");
sb.AppendLine(" eentity.CREATEDEPARTMENTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEDEPARTMENTID + "\";");
sb.AppendLine(" eentity.CREATEPOSTID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEPOSTID + "\";");
sb.AppendLine(" eentity.CREATEDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATEDATE + "\";");
sb.AppendLine(" eentity.EDITUSERID=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITUSERID + "\";");
sb.AppendLine(" eentity.EDITUSERNAME=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITUSERNAME + "\";");
sb.AppendLine(" eentity.EDITDATE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.EDITDATE + "\";");
sb.AppendLine(" eentity.ACTIVEROLE=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.ACTIVEROLE + "\";");
sb.AppendLine(" eentity.BUSINESSOBJECT=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT + "\";");
sb.AppendLine(" eentity.KPITIMEXML=\"" + entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.KPITIMEXML + "\";");
sb.AppendLine(" entity.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T = eentity;");
Tracer.Debug("流程引擎的XML数据 SubimtFlow入口处 回复咨询信息: FormID=" + submitData.FormID + ";ModelCode=" + submitData.ModelCode + " \r\n FLOW_CONSULTATION_T 实体:\r\n" + sb.ToString());
LogSubmitData(submitData);
#endregion
//FlowEngineService.EngineWcfGlobalFunctionClient FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
EnginFlowBLL FlowEngine = new EnginFlowBLL();
//Byte[] Bo = System.Text.UTF8Encoding.UTF8.GetBytes(submitData.XML);
//XElement xemeBoObject = XElement.Load(System.Xml.XmlReader.Create(new MemoryStream(Bo)));
//string strSystemCode = (from item in xemeBoObject.Descendants("Name") select item).FirstOrDefault().Value;
ModelInfo modelinfo = FlowBLL.GetSysCodeByModelCode( submitData.ModelCode);
// FlowEngine.FlowConsultatiClose(modelinfo.SysCode, flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID, flowConsultation.REPLYUSERID);
FlowEngine.FlowConsultatiClose( modelinfo.SysCode, flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID, flowConsultation.REPLYUSERID);
FlowBLL bll = new FlowBLL();
bll.ReplyConsultation( flowConsultation);
}
catch (Exception ex)
{
Tracer.Debug("回复咨询出错，异常信息: FORMID=" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "异常信息:\r\n" + ex.InnerException + ex.Message);
throw ex;
}
}
}
public string GetFlowDefine( SubmitData ApprovalData)
{
Tracer.Debug("GetFlowDefine获取流程信息 ModelCode=" + ApprovalData.ModelCode + " FormID=" + ApprovalData.FormID);
FlowBLL Flow = new FlowBLL();
return Flow.GetFlowDefine( ApprovalData);
}
/// <summary>
/// 对外接口：根据我的单据ID获取记录实体
/// </summary>
/// <param name="personalrecordid">我的单据ID</param>
/// <returns></returns>
public SMT.Workflow.Common.Model.FlowEngine.T_WF_PERSONALRECORD GetPersonalRecordByID(string personalrecordid)
{
FlowBLL bll = new FlowBLL();
//OracleConnection con = ADOHelper.GetOracleConnection();
return bll.GetPersonalRecordByID( personalrecordid);
}
/// <summary>
/// 根据流程ID获取流程的所有分支
/// </summary>
/// <param name="FlowID"></param>
/// <returns></returns>
public List<string> GetFlowBranch(string FlowID)
{
FlowBLL Flow = new FlowBLL();
return Flow.GetFlowBranch(FlowID);
}
/// <summary>
/// 获取用户有哪些未处理的单据
/// </summary>
/// <param name="UserID"></param>
/// <returns></returns>
public List<SMT.Workflow.Common.Model.FLOW_FLOWRECORDMASTER_T> GetFlowDataByUserID( string UserID)
{
try
{
FlowBLL Flow = new FlowBLL();
return Flow.GetFlowDataByUserID( UserID);
}
catch (Exception ex)
{
Tracer.Debug("GetFlowDataByUserID:" + UserID + " Ex:" + ex.Message);
throw ex;
}
}
/// <summary>
/// 发送审批消息（调用引擎服务）
/// </summary>
/// <param name="submitData"></param>
/// <param name="dataResult"></param>
/// <param name="sUser"></param>
/// <param name="CheckFlowResult"></param>
/// <param name="Flowbill"></param>
/// <param name="AppCompanyID">申请公司</param>
/// <param name="MessageUserID">申请人ID</param>
/// <param name="MessageUserName">申请人名</param>
private void SubmitEngineService(SubmitData submitData, DataResult dataResult, ref FlowUser sUser, CheckResult CheckFlowResult, FlowBLL Flowbill, string AppCompanyID, string MessageUserID, string MessageUserName, ref string ErroMessage)
{
bool bOK = true;
#region 发送审批消息（调用引擎服务）
try
{
if (dataResult.FlowResult == FlowResult.SUCCESS || dataResult.FlowResult == FlowResult.END)
{
#region 调用引擎服务（调用本地服DLL）
string IsTask = dataResult.FlowResult == FlowResult.SUCCESS ? "1" : "0";
MessageData tmpMessageData = null;
StringBuilder FlowResultXml = null;
#region
switch (submitData.SubmitFlag)
{
case SubmitFlag.New:
#region 新增
if (dataResult.IsCountersign)
{
#region 会签
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
List<string> listUserID = new List<string>();
List<string> listUserName = new List<string>();
if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
{
dataResult.DictCounterUser.Values.ToList().ForEach(users =>
{
users.ForEach(user =>
{
listUserID.Add(user.UserID);
listUserName.Add(user.UserName);
});
});
MessageUserID = string.Join("|", listUserID);
MessageUserName = string.Join("|", listUserName);
}
}
if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
{
dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
{
MessageUserID += "|" + user.UserID.Trim();
MessageUserName += "|" + user.UserName.Trim();
});
}
#endregion
}
else
{
#region 非会签(多个人时,只取其中一个)
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
MessageUserID = dataResult.UserInfo[0].UserID.Trim();
MessageUserName = dataResult.UserInfo[0].UserName.Trim();
}
if (dataResult.AgentUserInfo != null)
{
MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
}
#endregion
}
tmpMessageData = new MessageData("Flow", sUser.SysCode, AppCompanyID, submitData.ModelCode, sUser.ModelName,
submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
sUser.TrackingMessage += "流程引擎的XML数据新增: FormID=" + submitData.FormID + ";SysCode=" + sUser.SysCode + " ModelName=" + sUser.ModelName + "\r\n FlowResultXml= \r\n" + FlowResultXml + "\r\n submitData.XML= \r\n" + submitData.XML;
bOK = einginBll.SaveFlowTriggerData(submitData, FlowResultXml.ToString(), submitData.XML, ref sUser, ref ErroMessage);
sUser.TrackingMessage += "触发流程返回的结果 bOK＝" + bOK.ToString() + "\r\n";
sUser.TrackingMessage += "结束新增 FormID=" + submitData.FormID + " FlowEngine.SaveFlowTriggerData\r\n";
if (!bOK)
{
Tracer.Debug("触发流程返回的结果 bOK＝" + bOK.ToString() + " FormID=" + submitData.FormID + "\r\nFlowResultXml=" + FlowResultXml.ToString() + "\r\n submitDataXML=" + submitData.XML);
}
#endregion
break;
case SubmitFlag.Cancel:
#region 撤单
tmpMessageData = new MessageData("Flow", sUser.SysCode, AppCompanyID, submitData.ModelCode, sUser.ModelName,
submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
//bool bCancel = FlowEngine.FlowCancel(FlowResultXml.ToString(), submitData.XML);
sUser.TrackingMessage += "流程引擎的XML数据新增: FormID=" + submitData.FormID + ";SysCode=" + sUser.SysCode + " ModelName=" + sUser.ModelName + "\r\n FlowResultXml= \r\n" + FlowResultXml + "\r\n submitData.XML= \r\n" + submitData.XML;
bool bCancel = einginBll.FlowCancel(submitData, FlowResultXml.ToString(), submitData.XML, ref ErroMessage);
if (!bCancel)
{
Tracer.Debug("触发流程返回的结果 bCancel＝" + bCancel.ToString() + " FormID=" + submitData.FormID + "\r\nFlowResultXml=" + FlowResultXml.ToString() + "\r\n submitDataXML=" + submitData.XML);
}
#endregion
break;
case SubmitFlag.Approval:
#region 审核
//FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, submitData.ApprovalUser.UserID);
einginBll.TaskMsgClose(sUser.SysCode, submitData.FormID, submitData.ApprovalUser.UserID);
if (dataResult.CurrentIsCountersign)
{
#region 会签
if (submitData.ApprovalResult == ApprovalResult.NoPass)
{
#region 审核不通过
List<string> listMessageUserID = new List<string>();
CheckFlowResult.fd.Where(detail => detail.EDITUSERID != submitData.ApprovalUser.UserID).ToList().ForEach(item =>
{
listMessageUserID.Add(item.EDITUSERID);
if (!string.IsNullOrEmpty(item.AGENTUSERID))
{
listMessageUserID.Add(item.AGENTUSERID);
}
});
if (listMessageUserID.Count > 0)
{
string messageUserID = string.Join(",", listMessageUserID);
//FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, messageUserID);
einginBll.TaskMsgClose(sUser.SysCode, submitData.FormID, messageUserID);
}
tmpMessageData = new MessageData("Flow", sUser.SysCode, AppCompanyID, submitData.ModelCode, sUser.ModelName,
submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
//bOK = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
Tracer.Debug("开始审核FlowEngine.SaveFlowTriggerData FormID=" + submitData.FormID + "");
Tracer.Debug("流程引擎的XML数据 审核: FormID=" + submitData.FormID + ";SysCode=" + sUser.SysCode + " ModelName=" + sUser.ModelName + "\r\n FlowResultXml= \r\n" + FlowResultXml + "\r\n submitData.XML= \r\n" + submitData.XML);
bOK = einginBll.SaveFlowTriggerData(submitData, FlowResultXml.ToString(), submitData.XML, ref sUser, ref ErroMessage);
Tracer.Debug("bOK＝" + bOK.ToString());
Tracer.Debug("结束审核FlowEngine.SaveFlowTriggerData FormID=" + submitData.FormID + "");
if (!bOK)
{
Tracer.Debug("FlowEngineService:FormID=" + submitData.FormID + "\r\nFlowResultXml=" + FlowResultXml.ToString() + "\r\n submitDataXML=" + submitData.XML);
}
#endregion
}
else if (dataResult.IsGotoNextState)
{
#region 到下一状态
List<string> listMessageUserID = new List<string>();
CheckFlowResult.fd.Where(detail => detail.EDITUSERID != submitData.ApprovalUser.UserID).ToList().ForEach(item =>
{
listMessageUserID.Add(item.EDITUSERID);
if (!string.IsNullOrEmpty(item.AGENTUSERID))
{
listMessageUserID.Add(item.AGENTUSERID);
}
});
if (listMessageUserID.Count > 0)
{
string messageUserID = string.Join(",", listMessageUserID);
// FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, messageUserID);
einginBll.TaskMsgClose(sUser.SysCode, submitData.FormID, messageUserID);
}
if (dataResult.IsCountersign)
{
#region
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
List<string> listUserID = new List<string>();
List<string> listUserName = new List<string>();
if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
{
dataResult.DictCounterUser.Values.ToList().ForEach(users =>
{
users.ForEach(user =>
{
listUserID.Add(user.UserID);
listUserName.Add(user.UserName);
});
});
MessageUserID = string.Join("|", listUserID);
MessageUserName = string.Join("|", listUserName);
}
}
if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
{
dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
{
MessageUserID += "|" + user.UserID.Trim();
MessageUserName += "|" + user.UserName.Trim();
});
}
#endregion
}
else
{
#region
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
MessageUserID = dataResult.UserInfo[0].UserID.Trim();
MessageUserName = dataResult.UserInfo[0].UserName.Trim();
}
if (dataResult.AgentUserInfo != null)
{
MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
}
#endregion
}
tmpMessageData = new MessageData("Flow", sUser.SysCode, AppCompanyID, submitData.ModelCode, sUser.ModelName,
submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
bOK = einginBll.SaveFlowTriggerData(submitData, FlowResultXml.ToString(), submitData.XML, ref sUser, ref ErroMessage);
if (!bOK)
{
Tracer.Debug("FlowEngineService:FormID=" + submitData.FormID + "\r\nFlowResultXml=" + FlowResultXml.ToString() + "\r\n submitDataXML=" + submitData.XML);
}
#endregion
}
#endregion
}
else
{
#region 非会签
if (dataResult.IsCountersign)
{
#region
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
List<string> listUserID = new List<string>();
List<string> listUserName = new List<string>();
if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
{
dataResult.DictCounterUser.Values.ToList().ForEach(users =>
{
users.ForEach(user =>
{
listUserID.Add(user.UserID);
listUserName.Add(user.UserName);
});
});
MessageUserID = string.Join("|", listUserID);
MessageUserName = string.Join("|", listUserName);
}
}
if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
{
dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
{
MessageUserID += "|" + user.UserID.Trim();
MessageUserName += "|" + user.UserName.Trim();
});
}
#endregion
}
else
{
#region
if (dataResult.FlowResult == FlowResult.SUCCESS)
{
MessageUserID = dataResult.UserInfo[0].UserID.Trim();
MessageUserName = dataResult.UserInfo[0].UserName.Trim();
}
if (dataResult.AgentUserInfo != null)
{
MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
}
#endregion
}
tmpMessageData = new MessageData("Flow", sUser.SysCode, AppCompanyID, submitData.ModelCode, sUser.ModelName,
submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
sUser.TrackingMessage += "流程引擎的XML数据新增: FormID=" + submitData.FormID + ";SysCode=" + sUser.SysCode + " ModelName=" + sUser.ModelName + "\r\n FlowResultXml= \r\n" + FlowResultXml + "\r\n submitData.XML= \r\n" + submitData.XML;
bOK = einginBll.SaveFlowTriggerData(submitData, FlowResultXml.ToString(), submitData.XML, ref sUser, ref ErroMessage);
if (!bOK)
{
Tracer.Debug("触发流程返回的结果 bOK＝" + bOK.ToString() + " FormID=" + submitData.FormID + "\r\nFlowResultXml=" + FlowResultXml.ToString() + "\r\n submitDataXML=" + submitData.XML);
}
#endregion
}
#endregion
break;
}
#endregion
#endregion 调用引擎服务（调用本地服DLL）
}
}
catch (Exception ex)
{
//Tracer.Debug("FlowEngineService: -" + "\n\nError:" + ex.InnerException + ex.Message);
Tracer.Debug("发送审批消息FORMID=" + sUser.FormID + " 异常信息:" + ex.ToString() + "\r\n");
if (string.IsNullOrEmpty(ErroMessage))
{
throw new Exception("发送审批消息失败,请联系管理员!");
}
else
{
throw new Exception(ErroMessage);
}
}
#endregion
}
public DataResult SubimtFlow(SubmitData submitData)
{
//SMTWorkFlowManage.ColseWorkFlowRuntime(null);
//DataSet ds = new DataSet();
LogSubmitData(submitData);
Tracer.Debug("***********************************************开始***********************************************");
string returnMsg = "";//暂时没有用,记录执行的顺序
#region 更新个人缓存
//临时屏蔽
//FlowEngine.TaskCacheReflesh(submitData.ApprovalUser.UserID);
//Tracer.Debug("FormID=" + submitData.FormID + ";更新个人缓存 完成 UserID=" + submitData.ApprovalUser.UserID);
#endregion
DateTime dtStart = DateTime.Now;
DateTime dtEngineStart = DateTime.Now;
DateTime dtEnd = DateTime.Now;
DateTime dtCheckData = DateTime.Now;
DataResult dataResult = new DataResult();
FlowUser User = new FlowUser();
//设置2分钟超时时间
//using (TransactionScope ts = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(DateTime.Now.AddMinutes(2).Ticks)))
//{
try
{
#region 初始化流程所属人的信息
Tracer.Debug("进入事务操作 FormID=" + submitData.FormID);
User = new FlowUser(submitData.ApprovalUser.CompanyID, submitData.ApprovalUser.UserID, submitData.ModelCode);
User.FormID = submitData.FormID;
Tracer.Debug("初始化流程所属人的信息 FormID=" + submitData.FormID);
SUser = User;
Tracer.Debug("SUser = User FormID=" + submitData.FormID);
FlowBLL Flowbll = new FlowBLL();
string AppCompanyID = ""; //申请公司
string MessageUserID = ""; //申请人ID
string MessageUserName = ""; //申请人名
dataResult.FlowResult = FlowResult.SUCCESS;
#endregion
#region 检查流程数据是否规范
if (!FlowBLL.CheckFlowData(submitData, ref dataResult))
{
dataResult.FlowResult = FlowResult.FAIL;
{
return dataResult;
}
}
#region XML进行验证
if (!string.IsNullOrEmpty(submitData.XML) && submitData.SubmitFlag == SubmitFlag.New)
{//如果是提交并XML不为空是进行验证
if (VerifyXML(submitData.XML))
{
dataResult.Err = "传入的XML不合法！请检查元数据Key值和DataValue值是否有空的";
dataResult.FlowResult = FlowResult.FAIL;
FlowMonitor.AddFlowMonitor(submitData, User);
return dataResult;
}
}
if (string.IsNullOrEmpty(submitData.XML) && submitData.SubmitFlag == SubmitFlag.New)
{//如果是提交并XML为空
dataResult.Err = "XML元数据不能为空！";
dataResult.FlowResult = FlowResult.FAIL;
FlowMonitor.AddFlowMonitor(submitData, User);
return dataResult;
}
#endregion
#endregion
#region 检查是否已提交流程(对数据库操作)
submitData.ApprovalResult = submitData.SubmitFlag == SubmitFlag.New ? ApprovalResult.Pass : submitData.ApprovalResult;
submitData.FlowSelectType = submitData.FlowSelectType == null ? FlowSelectType.FixedFlow : submitData.FlowSelectType;
CheckResult CheckFlowResult = Flowbll.CheckFlowIsApproved(submitData, dataResult);//对数据库操作
dtCheckData = DateTime.Now;
dataResult = CheckFlowResult.APPDataResult;
if (CheckFlowResult.Flag == 0 && submitData.SubmitFlag == SubmitFlag.New)//已审批：1，未审批:0
{
dataResult.Err = "该单据已提交，还没有审核，不能再提交！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
if (CheckFlowResult.fd != null && CheckFlowResult.fd[0].CHECKSTATE == "1" && submitData.SubmitFlag == SubmitFlag.New)//审核中：1
{//如果单据还在审核中，不允许再提交单据
dataResult.Err = "该单据已在审核中，不能再提交！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
#endregion
#region 新增,撤单,审核
dataResult.AppState = submitData.NextStateCode;
if (submitData.SubmitFlag == SubmitFlag.New)
{
//提交新流程
#region 新增
AppCompanyID = submitData.ApprovalUser.CompanyID;
if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
//自选流程
dataResult = Flowbll.SubmitFreeFlow(submitData, dataResult, ref User);//对数据库操作
else
{
//固定流程
Tracer.Debug("固定流程.Flowbill.AddFlow2");
dataResult = Flowbll.SubmitFlow(submitData, dataResult, ref User);//对数据库操作
}
#endregion
}
else if (submitData.SubmitFlag == SubmitFlag.Cancel)
{
#region 撤单
if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
{
submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
}
submitData.ApprovalContent = "";
dataResult = Flowbll.CancelFlow(submitData, dataResult, CheckFlowResult.fd);
dataResult.SubmitFlag = submitData.SubmitFlag;
#endregion
}
else
{
//审批流程
#region 审核
if (CheckFlowResult.fd[0] == null)
{
dataResult.Err = "FormID =" + submitData.FormID + ";该单据没有审核记录！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
{
submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
}
//引擎消息数据
AppCompanyID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID;
MessageUserID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERID;
MessageUserName = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERNAME;
submitData.ApprovalUser.CompanyID = CheckFlowResult.fd[0].EDITCOMPANYID;
submitData.ApprovalUser.DepartmentID = CheckFlowResult.fd[0].EDITDEPARTMENTID;
submitData.ApprovalUser.PostID = CheckFlowResult.fd[0].EDITPOSTID;
submitData.FlowSelectType = (FlowSelectType)Convert.ToInt32(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.FLOWSELECTTYPE);
if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
dataResult = Flowbll.ApprovalFreeFlow(submitData, dataResult, CheckFlowResult.fd, ref User);//对数据库操作、对服务操作
else
dataResult = Flowbll.ApprovalFlow(submitData, dataResult, CheckFlowResult.fd, ref User, ref returnMsg);
#endregion
}
#endregion
#region 如果检出有多个审核人时，返回界面让用户选择一个人进行审核
if (dataResult.FlowResult == FlowResult.MULTIUSER)
{
string users = "FormID =" + submitData.FormID + " 检出有多个审核人\r\n";
foreach (var u in dataResult.UserInfo)
{
//users += "CompanyID =" + u.CompanyID + "\r\n";
//users += "DepartmentID = " + u.DepartmentID + "\r\n";
//users += "PostID = " + u.PostID + "\r\n";
//users += "serID = " + u.UserID + "\r\n";
//users += "UserName = "******"\r\n";
users += "公司ID = " + u.CompanyID + "\r\n";
users += "部门ID = " + u.DepartmentID + "\r\n";
users += "岗位ID = " + u.PostID + "\r\n";
users += "员工ID = " + u.UserID + "\r\n";
users += "公司名称 = " + u.CompanyName + "\r\n";
users += "部门名称 = " + u.DepartmentName + "\r\n";
users += "岗位名称 = " + u.PostName + "\r\n";
users += "员工姓名 = " + u.UserName + "\r\n";
users += "------------------------------------\r\n";
}
Tracer.Debug(users + "返回界面让用户选择一个人审核人");
for (int i = 0; i < dataResult.UserInfo.Count; i++)
{
dataResult.UserInfo[i].Roles = null; //解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
}
return dataResult;
}
#endregion
#region 解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
for (int i = 0; i < dataResult.UserInfo.Count; i++)
{
dataResult.UserInfo[i].Roles = null; //解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
}
if (dataResult.DictCounterUser != null)
{
if (dataResult.DictCounterUser.Count > 0)
{
string name = "";
foreach (KeyValuePair<FlowRole, List<UserInfo>> u in dataResult.DictCounterUser)
{
name += "角色名称：" + u.Key.Remark + " 人数：" + u.Value.Count + "\r\n";
foreach (var user in u.Value)
{
user.Roles = null;//解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
name += "姓名：" + user.UserName + " 公司：" + user.CompanyName + "\r\n";
}
name += "---------------------------------------------------------------\r\n";
}
Tracer.Debug("FormID=" + User.FormID + " 会签角色下所有的人员 \r\n" + name);
}
}
#endregion
#region 发送审批消息（调用引擎服务）
Tracer.Debug("FormID=" + User.FormID + " 模块名称：user.ModelCode＝" + User.ModelCode + "; user.ModelName=" + User.ModelName + " ;流程名称＝" + User.FlowName + "(" + User.FlowCode + ")");
if (string.IsNullOrEmpty(strIsFlowEngine) || strIsFlowEngine.ToLower() == "true")
{
SubmitEngineService(submitData, dataResult, ref User, CheckFlowResult, Flowbll, AppCompanyID, MessageUserID, MessageUserName, ref returnMsg);
}
#endregion
#region 修改我的单据状态
//修改我的单据状态 新建并且不能不等于会签才更改状态
if (submitData.SubmitFlag == SubmitFlag.New && dataResult.FlowResult == FlowResult.SUCCESS)
{
EnginFlowBLL.AddPersonalRecord(submitData, "1", User, null);
}
if (dataResult.FlowResult == FlowResult.END)
{
EnginFlowBLL.AddPersonalRecord(submitData, dataResult.CheckState, User, CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T);
}
dtEnd = DateTime.Now;
dataResult.SubmitFlag = submitData.SubmitFlag;
if (dataResult.FlowResult == FlowResult.FAIL)
{
dataResult.Err = dataResult.Err + " \r\n FormID＝" + User.FormID + "；时间：" + DateTime.Now.ToString();
User.ErrorMsg += "=================================================================================\r\n";
User.ErrorMsg += dataResult.Err + "\r\n";
FlowMonitor.AddFlowMonitor(submitData, User);
}
#endregion
//ts.Complete();//提交事务
//关闭数据库
Tracer.Debug("执行流程成功：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "(" + User.UserID + ");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + " ;流程名称：" + User.FlowName + " (" + User.FlowCode + ") \r\n 返回给业务系统的 dataResult.FlowResult＝" + dataResult.FlowResult.ToString() + " " + dataResult.Err);
}
catch (Exception ex)
{
#region 记录到流程监控表里
//ts.Dispose();
dataResult.RunTime += "---FlowEnd:" + DateTime.Now.ToString();
dataResult.FlowResult = FlowResult.FAIL;
dataResult.Err = ex.Message;
User.ErrorMsg += "=================================================================================\r\n";
User.ErrorMsg += "执行流程失败：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "(" + User.UserID + ");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + "; 流程名称：" + User.FlowName + " (" + User.FlowCode + "); 异常信息\r\n" + ex.ToString() + "\r\n";
FlowMonitor.AddFlowMonitor(submitData, User);
#endregion
#region restore workflow instanceState
if (User.InstanceState != null && User.InstanceState.Tables[0].Rows.Count > 0)
{
foreach (DataRow dr in User.InstanceState.Tables[0].Rows)
{
Tracer.Debug("恢复工作流InstanceState:" + dr["instance_id"]);
InsertInstanceState(dr);
}
}
#endregion
#region return FAIL result
if (dataResult.FlowResult == FlowResult.FAIL)
{
dataResult.Err = dataResult.Err + " FormID＝" + User.FormID + "；时间：" + DateTime.Now.ToString();
Tracer.Debug("失败错误信息：" + dataResult.Err);
}
Tracer.Debug("执行流程失败：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "(" + User.UserID + ");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + "; 流程名称：" + User.FlowName + " (" + User.FlowCode + ");执行踪信息如下:\r\n" + User.TrackingMessage + "\r\n 异常信息\r\n" + ex.ToString());
return dataResult;
#endregion
}
finally
{
}
//}
FlowMonitor.AddInstance(submitData, User);
return dataResult;
}
public DataResult SubimtFlow(SubmitData submitData)
{
#region 测试用例
//submitData.FlowSelectType = FlowSelectType.FixedFlow;
//submitData.FormID = "0671c1d0-07b9-4baa-9a36-349f0c09bd04";
//submitData.ModelCode = "T_WP_YEARNORMDRAFT";
//submitData.ApprovalUser = new UserInfo();
//submitData.ApprovalUser.CompanyID = "721c99d5-4cfb-4cc7-ba43-a05217e25918";
//submitData.ApprovalUser.DepartmentID = "7fc6b3af-92ec-442b-921e-6a8d13039ce9";
//submitData.ApprovalUser.PostID = "aa1496a5-840b-4b15-bc3e-36c2aeb14d3b";
//submitData.ApprovalUser.UserID = "e65cdb8f-26f2-440c-a5f9-977ea29fe4c2";
//submitData.ApprovalUser.UserName = "******";
//submitData.NextStateCode = "";
//submitData.NextApprovalUser = new UserInfo();
//submitData.NextApprovalUser.CompanyID = "721c99d5-4cfb-4cc7-ba43-a05217e25918";
//submitData.NextApprovalUser.DepartmentID = "e6e9546c-2d58-4f1c-abb6-139df4055114";
//submitData.NextApprovalUser.PostID = "fdbe688e-8886-42ac-9392-914e4e20960b";
//submitData.NextApprovalUser.UserID = "7e2fb3cd-ff1a-47b4-91b0-1572e6a3f3e5";
//submitData.NextApprovalUser.UserName = "******";
//submitData.SubmitFlag = SubmitFlag.Approval;
//submitData.FlowType = FlowType.Approval;
//submitData.ApprovalResult = ApprovalResult.Pass;
//submitData.ApprovalContent = "审核通过";
//submitData.SumbitCompanyID = "";
//submitData.SumbitDeparmentID = "";
//submitData.SumbitPostID = "";
//submitData.SumbitUserID = "";
//submitData.SumbitUserName = "";
//StringBuilder sb = new StringBuilder();
//sb.AppendLine("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
//sb.AppendLine("<System>");
//sb.AppendLine(" <Name>WP</Name>");
//sb.AppendLine(" <Version>1.0</Version>");
//sb.AppendLine(" <System>");
//sb.AppendLine(" <Function Description=\"\" Address=\"\" FuncName=\"\" Binding=\"\" SplitChar=\"Г\">");
//sb.AppendLine(" <ParaStr>");
//sb.AppendLine(" <Para TableName=\"\" Name=\"\" Description=\"\" Value=\"\" />");
//sb.AppendLine(" </ParaStr>");
//sb.AppendLine(" </Function>");
//sb.AppendLine(" </System>");
//sb.AppendLine(" <MsgOpen>");
//sb.AppendLine(" <AssemblyName>SMT.WP.UI</AssemblyName>");
//sb.AppendLine(" <PublicClass>SMT.WP.UI.Class.Utility</PublicClass>");
//sb.AppendLine(" <ProcessName>CreateFormFromEngine</ProcessName>");
//sb.AppendLine(" <PageParameter>WP/YearNormDraft/Audit</PageParameter>");
//sb.AppendLine(" <ApplicationOrder>{DNORMID}</ApplicationOrder>");
//sb.AppendLine(" <FormTypes>Audit</FormTypes>");
//sb.AppendLine(" </MsgOpen>");
//sb.AppendLine(" <Object Name=\"T_WP_YEARNORMDRAFT\" Description=\"公司年度经营指标方案\" Key=\"DNORMID\" id=\"0671c1d0-07b9-4baa-9a36-349f0c09bd04\">");
//sb.AppendLine(" <Attribute Name=\"DNORMID\" LableResourceID=\"DNORMID\" Description=\"指标主键ID,GUID\" DataType=\"string\" DataValue=\"0671c1d0-07b9-4baa-9a36-349f0c09bd04\" DataText=\"0671c1d0-07b9-4baa-9a36-349f0c09bd04\" />");
//sb.AppendLine(" <Attribute Name=\"PLANYEAR\" LableResourceID=\"PLANYEAR\" Description=\"计划年度\" DataType=\"string\" DataValue=\"2009\" DataText=\"2009\" />");
//sb.AppendLine(" <Attribute Name=\"COMPANYID\" LableResourceID=\"COMPANYID\" Description=\"所属公司ID\" DataType=\"string\" DataValue=\"721c99d5-4cfb-4cc7-ba43-a05217e25918\" DataText=\"721c99d5-4cfb-4cc7-ba43-a05217e25918\" />");
//sb.AppendLine(" <Attribute Name=\"COMPANYNAME\" LableResourceID=\"COMPANYNAME\" Description=\"所属公司名称\" DataType=\"string\" DataValue=\"集团公司\" DataText=\"集团公司\" />");
//sb.AppendLine(" <Attribute Name=\"APPLYDATE\" LableResourceID=\"APPLYDATE\" Description=\"申请日期\" DataType=\"datetime\" DataValue=\"2012/12/4 14:19:39\" DataText=\"2012/12/4 14:19:39\" />");
//sb.AppendLine(" <Attribute Name=\"APPLYMAN\" LableResourceID=\"APPLYMAN\" Description=\"申请人\" DataType=\"string\" DataValue=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" DataText=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" />");
//sb.AppendLine(" <Attribute Name=\"TASKSENDDATE\" LableResourceID=\"TASKSENDDATE\" Description=\"任务发放日期\" DataType=\"datetime\" DataValue=\"0001/1/1 0:00:00\" DataText=\"0001/1/1 0:00:00\" />");
//sb.AppendLine(" <Attribute Name=\"CHECKSTATES\" LableResourceID=\"CHECKSTATES\" Description=\"审核状态\" DataType=\"string\" DataValue=\"0\" DataText=\"0\" />");
//sb.AppendLine(" <Attribute Name=\"EDITSTATE\" LableResourceID=\"EDITSTATE\" Description=\"对象编辑状态\" DataType=\"string\" DataValue=\"2\" DataText=\"2\" />");
//sb.AppendLine(" <Attribute Name=\"OWNERCOMPANYID\" LableResourceID=\"OWNERCOMPANYID\" Description=\"记录所属公司ID\" DataType=\"string\" DataValue=\"721c99d5-4cfb-4cc7-ba43-a05217e25918\" DataText=\"721c99d5-4cfb-4cc7-ba43-a05217e25918\" />");
//sb.AppendLine(" <Attribute Name=\"OWNERDEPARTMENTID\" LableResourceID=\"OWNERDEPARTMENTID\" Description=\"记录所属部门ID\" DataType=\"string\" DataValue=\"7fc6b3af-92ec-442b-921e-6a8d13039ce9\" DataText=\"7fc6b3af-92ec-442b-921e-6a8d13039ce9\" />");
//sb.AppendLine(" <Attribute Name=\"OWNERPOSTID\" LableResourceID=\"OWNERPOSTID\" Description=\"记录所属岗位ID\" DataType=\"string\" DataValue=\"aa1496a5-840b-4b15-bc3e-36c2aeb14d3b\" DataText=\"aa1496a5-840b-4b15-bc3e-36c2aeb14d3b\" />");
//sb.AppendLine(" <Attribute Name=\"OWNERID\" LableResourceID=\"OWNERID\" Description=\"记录所属用户ID\" DataType=\"string\" DataValue=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" DataText=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" />");
//sb.AppendLine(" <Attribute Name=\"CREATECOMPANYID\" LableResourceID=\"CREATECOMPANYID\" Description=\"创建公司ID\" DataType=\"string\" DataValue=\"721c99d5-4cfb-4cc7-ba43-a05217e25918\" DataText=\"集团公司\" />");
//sb.AppendLine(" <Attribute Name=\"CREATEDEPARTMENTID\" LableResourceID=\"CREATEDEPARTMENTID\" Description=\"创建部门ID\" DataType=\"string\" DataValue=\"7fc6b3af-92ec-442b-921e-6a8d13039ce9\" DataText=\"总经办\" />");
//sb.AppendLine(" <Attribute Name=\"CREATEPOSTID\" LableResourceID=\"CREATEPOSTID\" Description=\"创建岗位ID\" DataType=\"string\" DataValue=\"aa1496a5-840b-4b15-bc3e-36c2aeb14d3b\" DataText=\"总经理\" />");
//sb.AppendLine(" <Attribute Name=\"CREATEUSERID\" LableResourceID=\"CREATEUSERID\" Description=\"创建人ID\" DataType=\"string\" DataValue=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" DataText=\"黄总\" />");
//sb.AppendLine(" <Attribute Name=\"CREATEDATE\" LableResourceID=\"CREATEDATE\" Description=\"创建时间\" DataType=\"datetime\" DataValue=\"2012/12/4 14:19:39\" DataText=\"2012/12/4 14:19:39\" />");
//sb.AppendLine(" <Attribute Name=\"UPDATEUSERID\" LableResourceID=\"UPDATEUSERID\" Description=\"修改人ID\" DataType=\"string\" DataValue=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" DataText=\"e65cdb8f-26f2-440c-a5f9-977ea29fe4c2\" />");
//sb.AppendLine(" <Attribute Name=\"UPDATEDATE\" LableResourceID=\"UPDATEDATE\" Description=\"修改时间\" DataType=\"datetime\" DataValue=\"2012/12/4 14:19:44\" DataText=\"2012/12/4 14:19:44\" />");
//sb.AppendLine(" <Attribute Name=\"REMARK\" LableResourceID=\"REMARK\" Description=\"备注\" DataType=\"string\" DataValue=\"\" DataText=\"\" />");
//sb.AppendLine(" <Attribute Name=\"ISMAJORDATA\" LableResourceID=\"ISMAJORDATA\" Description=\"是否主数据\" DataType=\"string\" DataValue=\"1\" DataText=\"1\" />");
//sb.AppendLine(" <Attribute Name=\"AUXIDNORMID\" LableResourceID=\"AUXIDNORMID\" Description=\"附属的主数据\" DataType=\"string\" DataValue=\"\" DataText=\"\" />");
//sb.AppendLine(" <Attribute Name=\"RECVERSION\" LableResourceID=\"RECVERSION\" Description=\"版本号\" DataType=\"string\" DataValue=\"1\" DataText=\"1\" />");
//sb.AppendLine(" <ObjectList Name=\"T_WP_YEARNORMDEFINE\" LableResourceID=\"T_WP_YEARNORMDEFINE\" Description=\"公司年度经营指标定义\" DataText=\"\" />");
//sb.AppendLine(" </Object>");
//sb.AppendLine("</System>");
//submitData.XML = sb.ToString();
//sb.Clear();
//SmulatedFlowService sfs = new SmulatedFlowService();
//sfs.SubimtFlow(submitData);
//return null;
#endregion
SMTWorkFlowManage.ColseWorkFlowRuntime(null);
DataSet ds = new DataSet();
WriteSubmitDate(submitData);
LogHelper.WriteLog("***********************************************开始" + DateTime.Now.ToString() + "***********************************************");
string returnMsg = "";//暂时没有用,记录执行的顺序
#region 更新个人缓存
FlowEngine.TaskCacheReflesh(submitData.ApprovalUser.UserID);
LogHelper.WriteLog("FormID=" + submitData.FormID + ";更新个人缓存 完成 UserID=" + submitData.ApprovalUser.UserID);
#endregion
// MsOracle.BeginTransaction(con);
DateTime dtStart = DateTime.Now;
DateTime dtEngineStart = DateTime.Now;
DateTime dtEnd = DateTime.Now;
DateTime dtCheckData = DateTime.Now;
DataResult dataResult = new DataResult();
FlowUser User = new FlowUser();
//using (TransactionScope ts = new TransactionScope())
//设置2分钟超时时间
using (TransactionScope ts = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(DateTime.Now.AddMinutes(2).Ticks)))
{
LogHelper.WriteLog("进入事务操作 FormID=" + submitData.FormID);
OracleConnection con = ADOHelper.GetOracleConnection();
LogHelper.WriteLog("打开数据库 完成 FormID=" + submitData.FormID);
#region 事务处理
#region 初始化流程所属人的信息
User = new FlowUser(submitData.ApprovalUser.CompanyID, submitData.ApprovalUser.UserID, con, submitData.ModelCode);
User.FormID = submitData.FormID;
LogHelper.WriteLog("初始化流程所属人的信息 FormID=" + submitData.FormID);
SUser = User;
LogHelper.WriteLog("SUser = User FormID=" + submitData.FormID);
#endregion
//System.Threading.Thread.Sleep(60000);
//DataResult dataResult = new DataResult();
FlowBLL Flowbill = new FlowBLL();
string AppCompanyID = ""; //申请公司
string MessageUserID = ""; //申请人ID
string MessageUserName = ""; //申请人名
dataResult.FlowResult = FlowResult.SUCCESS;
try
{
#region 检查流程数据是否规范
if (!FlowBLL.CheckFlowData(submitData, ref dataResult))
{
dataResult.FlowResult = FlowResult.FAIL;
{
//ts.Complete();
return dataResult;
}
}
#region XML进行验证
if (!string.IsNullOrEmpty(submitData.XML) && submitData.SubmitFlag == SubmitFlag.New)
{//如果是提交并XML不为空是进行验证
if (VerifyXML(submitData.XML))
{
dataResult.Err = "传入的XML不合法！请检查元数据Key值和DataValue值是否有空的";
dataResult.FlowResult = FlowResult.FAIL;
FlowMonitor.AddFlowMonitor(submitData, User);
return dataResult;
}
}
if (string.IsNullOrEmpty(submitData.XML) && submitData.SubmitFlag == SubmitFlag.New)
{//如果是提交并XML为空
dataResult.Err = "XML元数据不能为空！";
dataResult.FlowResult = FlowResult.FAIL;
FlowMonitor.AddFlowMonitor(submitData, User);
return dataResult;
}
#endregion
#endregion
submitData.ApprovalResult = submitData.SubmitFlag == SubmitFlag.New ? ApprovalResult.Pass : submitData.ApprovalResult;
submitData.FlowSelectType = submitData.FlowSelectType == null ? FlowSelectType.FixedFlow : submitData.FlowSelectType;
#region 新增,撤单,审核
#region 检查是否已提交流程(对数据库操作)
OracleConnection ocon = ADOHelper.GetOracleConnection();
CheckResult CheckFlowResult = Flowbill.CheckFlow2(ocon, submitData, dataResult);//对数据库操作
dtCheckData = DateTime.Now;
dataResult = CheckFlowResult.APPDataResult;
if (CheckFlowResult.Flag == 0 && submitData.SubmitFlag == SubmitFlag.New)//已审批：1，未审批:0
{
//ts.Complete();
dataResult.Err = "该单据已提交，还没有审核，不能再提交！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
if (CheckFlowResult.fd!=null && CheckFlowResult.fd[0].CHECKSTATE == "1" && submitData.SubmitFlag == SubmitFlag.New)//审核中：1
{//如果单据还在审核中，不允许再提交单据
//ts.Complete();
dataResult.Err = "该单据已在审核中，不能再提交！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
if (ocon.State == ConnectionState.Open)
{
ocon.Close();
}
#endregion
dataResult.AppState = submitData.NextStateCode;
//提交新流程
if (submitData.SubmitFlag == SubmitFlag.New)
{
#region 新增
AppCompanyID = submitData.ApprovalUser.CompanyID;
if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
//自选流程
dataResult = Flowbill.AddFreeFlow(con, submitData, dataResult, ref User);//对数据库操作
else
{
//固定流程
LogHelper.WriteLog("固定流程.Flowbill.AddFlow2");
dataResult = Flowbill.AddFlow2(con, submitData, dataResult, ref User);//对数据库操作
}
#endregion
}
else if (submitData.SubmitFlag == SubmitFlag.Cancel)
{
#region 撤单
if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
{
submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
}
submitData.ApprovalContent = "";
dataResult = Flowbill.CancelFlow(submitData, dataResult, CheckFlowResult.fd);
dataResult.SubmitFlag = submitData.SubmitFlag;
#endregion
}
//审批流程
else
{
if (CheckFlowResult.fd[0] == null)
{
dataResult.Err = "FormID =" + submitData.FormID + ";该单据没有审核记录！";
dataResult.FlowResult = FlowResult.FAIL;
return dataResult;
}
#region 审核
if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
{
submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
}
//引擎消息数据
AppCompanyID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID;
MessageUserID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERID;
MessageUserName = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERNAME;
submitData.ApprovalUser.CompanyID = CheckFlowResult.fd[0].EDITCOMPANYID;
submitData.ApprovalUser.DepartmentID = CheckFlowResult.fd[0].EDITDEPARTMENTID;
submitData.ApprovalUser.PostID = CheckFlowResult.fd[0].EDITPOSTID;
submitData.FlowSelectType = (FlowSelectType)Convert.ToInt32(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.FLOWSELECTTYPE);
if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
dataResult = Flowbill.ApprovalFreeFlow(con, submitData, dataResult, CheckFlowResult.fd, ref User);//对数据库操作、对服务操作
else
dataResult = Flowbill.ApprovalFlow2(con, submitData, dataResult, CheckFlowResult.fd, ref User, ref returnMsg);
#endregion
}
#endregion
if (dataResult.FlowResult == FlowResult.MULTIUSER)
{
#region 如果检出有多个审核人时，返回界面让用户选择一个人进行审核
string users = "FormID =" + submitData.FormID + " 检出有多个审核人\r\n";
foreach (var u in dataResult.UserInfo)
{
//users += "CompanyID =" + u.CompanyID + "\r\n";
//users += "DepartmentID = " + u.DepartmentID + "\r\n";
//users += "PostID = " + u.PostID + "\r\n";
//users += "serID = " + u.UserID + "\r\n";
//users += "UserName = "******"\r\n";
users += "公司ID = " + u.CompanyID + "\r\n";
users += "部门ID = " + u.DepartmentID + "\r\n";
users += "岗位ID = " + u.PostID + "\r\n";
users += "员工ID = " + u.UserID + "\r\n";
users += "公司名称 = " + u.CompanyName + "\r\n";
users += "部门名称 = " + u.DepartmentName + "\r\n";
users += "岗位名称 = " + u.PostName + "\r\n";
users += "员工姓名 = " + u.UserName + "\r\n";
users += "------------------------------------\r\n";
}
LogHelper.WriteLog(users + "返回界面让用户选择一个人审核人");
for (int i = 0; i < dataResult.UserInfo.Count; i++)
{
dataResult.UserInfo[i].Roles = null; //解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
}
return dataResult;
#endregion
}
for (int i = 0; i < dataResult.UserInfo.Count; i++)
{
dataResult.UserInfo[i].Roles = null; //解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
}
if (dataResult.DictCounterUser != null)
{
if (dataResult.DictCounterUser.Count > 0)
{
string name = "";
foreach (KeyValuePair<Role_UserType, List<UserInfo>> u in dataResult.DictCounterUser)
{
name += "角色名称：" + u.Key.Remark + " 人数：" + u.Value.Count + "\r\n";
foreach (var user in u.Value)
{
user.Roles = null;//解决 基础连接已经关闭: 连接被意外关闭（WCF深层序列化问题）
name += "姓名：" + user.UserName + " 公司：" + user.CompanyName + "\r\n";
}
name += "---------------------------------------------------------------\r\n";
}
LogHelper.WriteLog("FormID=" + User.FormID + " 会签角色下所有的人员 \r\n" + name);
}
}
//return null;
//return dataResult;//测试检查流程用的，不能提交事务
LogHelper.WriteLog("FormID=" + User.FormID + " 模块名称：user.ModelCode＝" + User.ModelCode + "; user.ModelName=" + User.ModelName + " ;流程名称＝" + User.FlowName + "(" + User.FlowCode + ")");
if (string.IsNullOrEmpty(strIsFlowEngine) || strIsFlowEngine.ToLower() == "true")
{
#region 发送审批消息（调用引擎服务）
SubmitEngineService(con, submitData, dataResult, ref User, CheckFlowResult, Flowbill, AppCompanyID, MessageUserID, MessageUserName, ref returnMsg);
#endregion
}
//修改我的单据状态 新建并且不能不等于会签才更改状态
if (submitData.SubmitFlag == SubmitFlag.New && dataResult.FlowResult==FlowResult.SUCCESS )
{
EnginFlowBLL.AddPersonalRecord(con, submitData, "1", User, null);
}
if (dataResult.FlowResult == FlowResult.END)
{
EnginFlowBLL.AddPersonalRecord(con, submitData, dataResult.CheckState, User, CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T);
}
dtEnd = DateTime.Now;
dataResult.SubmitFlag = submitData.SubmitFlag;
if (dataResult.FlowResult == FlowResult.FAIL)
{
dataResult.Err = dataResult.Err + " \r\n FormID＝" + User.FormID + "；时间：" + DateTime.Now.ToString();
User.ErrorMsg += "=================================================================================\r\n";
User.ErrorMsg += dataResult.Err + "\r\n";
FlowMonitor.AddFlowMonitor(submitData, User);
}
#region 审核结束时关闭所有的流程资讯在待办中
//if (dataResult.FlowResult == FlowResult.END)
//{
// EnginFlowBLL FlowEngine = new EnginFlowBLL();
// FlowEngine.FlowConsultatiCloseAll(con, submitData.ModelCode, submitData.FormID);
//}
#endregion
ts.Complete();//提交事务
MsOracle.Close(con);//关闭数据库
LogHelper.WriteLog("执行流程成功：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "("+User.UserID+");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + " ;流程名称：" + User.FlowName + " (" + User.FlowCode + ") \r\n 返回给业务系统的 dataResult.FlowResult＝" + dataResult.FlowResult.ToString() + " " + dataResult.Err);
//FlowMonitor.AddInstance(submitData);
//return dataResult;
}
catch (Exception ex)
{
ts.Dispose();
if (con.State == System.Data.ConnectionState.Open)
{
con.Close();
con.Dispose();
}
dataResult.RunTime += "---FlowEnd:" + DateTime.Now.ToString();
dataResult.FlowResult = FlowResult.FAIL;
// Flowbill = null;
dataResult.Err = ex.Message;
#region 记录到流程监控表里
User.ErrorMsg += "=================================================================================\r\n";
User.ErrorMsg += "执行流程失败：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "(" + User.UserID + ");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + "; 流程名称：" + User.FlowName + " (" + User.FlowCode + "); 异常信息\r\n" + ex.ToString() + "\r\n";
FlowMonitor.AddFlowMonitor(submitData, User);
#endregion
#region restore workflow instanceState
if (User.InstanceState != null && User.InstanceState.Tables[0].Rows.Count > 0)
{
foreach (DataRow dr in User.InstanceState.Tables[0].Rows)
{
LogHelper.WriteLog("恢复工作流InstanceState:" + dr["instance_id"]);
InsertInstanceState(dr);
//WorkflowRuntime workflowRuntime = SMTWorkFlowManage.CreateWorkFlowRuntime(true);
//WorkflowInstance instance = SMTWorkFlowManage.GetWorkflowInstance(workflowRuntime,dr["instance_id"].ToString());// workflowRuntime.GetWorkflow(new Guid(tmp[0].FLOW_FLOWRECORDMASTER_T.INSTANCEID));
//LogHelper.WriteLog("恢复运行工作流InstanceState:" + dr["instance_id"]);
}
}
#endregion
if (dataResult.FlowResult == FlowResult.FAIL)
{
dataResult.Err = dataResult.Err + " FormID＝" + User.FormID + "；时间：" + DateTime.Now.ToString();
LogHelper.WriteLog("失败错误信息："+dataResult.Err);
}
LogHelper.WriteLog("执行流程失败：FormID＝" + User.FormID + ";单据所属人：" + User.UserName + "(" + User.UserID + ");公司名称:" + User.CompayName + ";模块名称:" + User.ModelName + "; 流程名称：" + User.FlowName + " (" + User.FlowCode + ");执行踪信息如下:\r\n" + User.TrackingMessage + "\r\n 异常信息\r\n" + ex.ToString());
return dataResult;
}
finally
{
if (Flowbill.workflowRuntime != null && Flowbill.workflowRuntime.IsStarted)
{
//Flowbill.workflowRuntime.Dispose();
}
if (con.State == System.Data.ConnectionState.Open)
{
con.Close();
con.Dispose();
}
//dataResult = null;
// LogHelper.WriteLog("-------Trace--FormID:" + submitData.FormID + "DateTime: Start:" + dtStart.ToString() + " EngineStart:" + dtEngineStart.ToString() + " End:" + dtEnd.ToString() + "\n");
}
#endregion
}
FlowMonitor.AddInstance(submitData,User);
return dataResult;
}
/// <summary>
/// 对外接口：根据我的单据ID获取记录实体
/// </summary>
/// <param name="personalrecordid">我的单据ID</param>
/// <returns></returns>
public T_WF_PERSONALRECORD GetPersonalRecordByID(string personalrecordid)
{
FlowBLL bll = new FlowBLL();
OracleConnection con = ADOHelper.GetOracleConnection();
return bll.GetPersonalRecordByID(con, personalrecordid);
}
public string GetFlowDefine(OracleConnection con, SubmitData ApprovalData)
{
LogHelper.WriteLog("GetFlowDefine获取流程信息 ModelCode=" + ApprovalData.ModelCode + " FormID=" + ApprovalData.FormID);
FlowBLL Flow = new FlowBLL();
return Flow.GetFlowDefine(con, ApprovalData);
}
public string UpdateFlow(OracleConnection con, FLOW_FLOWRECORDDETAIL_T entity)
{
FlowBLL bll = new FlowBLL();
bll.UpdateFlowRecord(con, entity, "", "");
return "";
}
/// <summary>
/// 获取用户有哪些未处理的单据
/// </summary>
/// <param name="UserID"></param>
/// <returns></returns>
public List<FLOW_FLOWRECORDMASTER_T> GetFlowDataByUserID(OracleConnection con, string UserID)
{
try
{
FlowBLL Flow = new FlowBLL();
return Flow.GetFlowDataByUserID(con, UserID);
}
catch (Exception ex)
{
LogHelper.WriteLog("GetFlowDataByUserID:" + UserID + " Ex:" + ex.Message);
throw ex;
}
}
