private void Data_Handle_Variable_Type100(byte[] data)
{
int n = 6 + _101_config.ipaddr_size;
byte SQ = data[n++];
int cot = _101_function.octets_to_number(data, n, _101_config.cotsize);
n += _101_config.cotsize;
int asduaddr = _101_function.octets_to_number(data, n, _101_config.asduaddr_size);
n += _101_config.asduaddr_size;
int infaddr = _101_function.octets_to_number(data, n, _101_config.infaddr_size);
n += _101_config.infaddr_size;
int QOI = data[n++];
if ((asduaddr != _101_config.asduaddr))
{
return;
}
if ((infaddr != 0) && (SQ != 0x01))
{
return;
}
if (QOI != (int)_101_config._IEC101_ASDU_COT_CODE_.EN_IEC101_ASDU_COT_RESP_CALL)
{
return;
}
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
if (_101_config._101_balance)
{//平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
switch (cot)
{
case (int)_101_config._IEC101_ASDU_COT_CODE_.EN_IEC101_ASDU_COT_ACT_ACK:
_101_config.process = (int)_101_config.IEC_101_Process.GOING;
break;
case (int)_101_config._IEC101_ASDU_COT_CODE_.EN_IEC101_ASDU_COT_STOP_ACT_ACK:
_101_config.process = (int)_101_config.IEC_101_Process.END; //流程结束
break;
case (int)_101_config._IEC101_ASDU_COT_CODE_.EN_IEC101_ASDU_COT_ACT_END:
if ((_101_config.process == (int)_101_config.IEC_101_Process.GOING) && //初始化总召
(_101_config.process_state == (int)_101_config.IEC_101_Process_State.INIT_CALL))
{
_101_config.process = (int)_101_config.IEC_101_Process.END; //初始化总召结束
//_101_config.process_state = (int)_101_config.IEC_101_Process_State.TIME_CHECK;
//Send_Data.Send_Msg_Manage_bt();
}
break;
default:
_101_config.process = (int)_101_config.IEC_101_Process.END; //流程结束
break;
}
}
private void YK_choise_Click(object sender, EventArgs e)
{
if (YK_Init())
{
this.Explain.Text = "";
cot = (int)_101_config._IEC101_ASDU_COT_CODE_.EN_IEC101_ASDU_COT_ACT;
se = 0x80;
this.Explain.AppendText("发送遥控预置...\r\n");
_101_config.process_state = (int)_101_config.IEC_101_Process_State.YK_SELECT;
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
Send_Data.Send_Msg_Manage_bt();
this.timer1.Start();
}
}
private void ToolStripMenuItem9_Click(object sender, EventArgs e)
{
SerialPort_config port_Config = new SerialPort_config();
if (serialPort1.IsOpen)//关闭连接
{
port_Config.SerialPort_Close(serialPort1, ToolStripMenuItem9);
}
else//打开连接
{
port_Config.SerialPort_Open(serialPort1, ToolStripMenuItem9, this.richTextBox1);
//设置打开连接就发送请求连接报文--->后面需加定时器，定时发送连接报文
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
_101_config.process_state = (int)_101_config.IEC_101_Process_State.UNCONNECT;
Send_Data.Send_Msg_Manage_bt();
}
}
public void Jumpto_Send_Data(int i)
{
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
switch (i)
{
case _101_config.General_Call_Ti100:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.INIT_CALL;
Send_Data.Send_Msg_Manage_bt();
break;
case _101_config.Read_Clock_Ti103:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.TIME_READ;
Send_Data.Send_Msg_Manage_bt();
break;
case _101_config.Synchro_Clock_Ti103:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.TIME_CHECK;
Send_Data.Send_Msg_Manage_bt();
break;
case _101_config.Link_Test_Ti104:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.TEST_LOOPBACK;
Send_Data.Send_Msg_Manage_bt();
break;
case _101_config.Heart_Test:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.TEST_HEART;
Send_Data.Send_Msg_Manage_bt();
break;
case _101_config.Reset_Ti105:
_101_config.process_state = (int)_101_config.IEC_101_Process_State.RESET_LOOPBACK;
Send_Data.Send_Msg_Manage_bt();
break;
default:
break;
}
}
private void VisitTime_Tick(object sender, EventArgs e)
{
if (SendFlag)
{
if (_101_config.process == (int)_101_config.IEC_101_Process.END)
{
bool[] Options = _101_config.Test_Options;
for (int i = 0; i < Options.Length; i++)
{
if (Options[i] == true)
{
textBox1.AppendText(Show_Explain(i, true));
_101_SendOut_Data SendData = new _101_SendOut_Data();
SendData.Jumpto_Send_Data(i);
SendFlag = false;
return;
}
}
}
}
else
{
if (_101_config.process == (int)_101_config.IEC_101_Process.END)
{
bool[] Options = _101_config.Test_Options;
for (int i = 0; i < Options.Length; i++)
{
if (Options[i] == true)
{
this.progressBar1.PerformStep();
textBox1.AppendText(Show_Explain(i, false));
Options[i] = false;
SendFlag = true;
return;
}
}
}
}
}
private void Data_Handle_Fixed_bt(byte[] data)
{
//_101_function _101_Function = new _101_function();
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
byte crtl = data[1];
int ipaddr = _101_function.octets_to_number(data, 2, _101_config.ipaddr_size);
int prm = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_PRM) >> 6;
if (prm == 1)
{//从机为启动站发起报文，主站应回复确认
int FC = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_FUN);
switch (FC)
{
case (int)_101_config.IEC101_CDIR_LK_CODE.FUN_AS: //从机发送请求链路状态
if ((_101_config.process == (int)_101_config.IEC_101_Process.GOING) &&
(_101_config.process_state == (int)_101_config.IEC_101_Process_State.RESET_LINK))
{
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_RSBS);
}
break;
case (int)_101_config.IEC101_CDIR_LK_CODE.FUN_RST_LK: //从机发送复位远方链路
if ((_101_config.process == (int)_101_config.IEC_101_Process.GOING) &&
(_101_config.process_state == (int)_101_config.IEC_101_Process_State.RESET_LINK))
{
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
_101_config.process_state = (int)_101_config.IEC_101_Process_State.LINK_STAUS_END;
}
break;
case (int)_101_config.IEC_101_Process_State.TEST_HEART: //主站收到从机的心跳测试报文 回复确认
if (_101_config.process == (int)_101_config.IEC_101_Process.END)
{
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
break;
default:
break;
}
}
else if (prm == 0)
{//从机为从站，该报文为从机发送的确认报文，对装置发起的报文进行了应答
int FC = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_FUN);
switch (FC)
{
case (int)_101_config.IEC101_MDIR_LK_CODE.FUN_RSBS: //从机回复链路状态
if ((_101_config.process == (int)_101_config.IEC_101_Process.GOING) &&
(_101_config.process_state == (int)_101_config.IEC_101_Process_State.LINK_STAUS))
{
_101_config.process_state = (int)_101_config.IEC_101_Process_State.RESET_LINK;
Send_Data.Send_Msg_Manage_bt(); //回复复位远方链路
}
break;
case (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK:
switch ((int)_101_config.process_state)
{
case (int)_101_config.IEC_101_Process_State.RESET_LINK: //当前在复位远方链路状态
break;
case (int)_101_config.IEC_101_Process_State.TEST_HEART: //心跳测试状态
_101_config.process = (int)_101_config.IEC_101_Process.END;
break;
default:
break;
}
break;
default:
break;
}
}
}
private void Data_Handle_Variable(byte[] data)
{
_101_SendOut_Data Send_Data = new _101_SendOut_Data();
int n = 4;
byte crtl = data[n++];
int prm = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_PRM) >> 6;
int acd = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_FCB_ACD) >> 5;
int dfc = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_FCV_DFC) >> 4;
int cmd = (crtl & (int)_101_config.IEC101_CONTROL_DEF.CN_CTL_LK_FUN);
int ipaddr = _101_function.octets_to_number(data, n, _101_config.ipaddr_size);
n += _101_config.ipaddr_size;
byte type = data[n];
if (_101_config._101_balance)//平衡校验
{
if (cmd != (int)_101_config.IEC101_CDIR_LK_CODE.FUN_SD)
{
return;
}
}
else if (_101_config._101_unbalance)//非平衡
{
if (prm != 0x00)
{
return;
}
if (cmd != (int)_101_config.IEC101_MDIR_LK_CODE.FUN_RSDT)
{
return;
}
}
switch (type)
{
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP070:
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
if ((_101_config.process == (int)_101_config.IEC_101_Process.GOING) &&
(_101_config.process_state == (int)_101_config.IEC_101_Process_State.LINK_STAUS_END))
{
_101_config.process = (int)_101_config.IEC_101_Process.END; //
_101_config.FCB = 1;
//_101_config.process_state = (int)_101_config.IEC_101_Process_State.INIT_CALL;
//Send_Data.Send_Msg_Manage_bt();
}
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP100:
Data_Handle_Variable_Type100(data);
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP103:
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
_101_config.process = (int)_101_config.IEC_101_Process.END;
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP104: //测试命令
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
_101_config.process = (int)_101_config.IEC_101_Process.END;
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP105: //复位进程
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
_101_config.process = (int)_101_config.IEC_101_Process.END;
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP045:
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP046:
//添加处理遥控
Data_Handle_Variable_YK(data);
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP001: //单点COS
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP003: //双点COS
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
if (_101_config.process == (int)_101_config.IEC_101_Process.GOING)
{
Send_Data.Send_Msg_Manage_bt();
}
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP030: //单点SOE
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP031: //双点SOE
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
if (_101_config.process == (int)_101_config.IEC_101_Process.GOING)
{
Send_Data.Send_Msg_Manage_bt();
}
break;
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP009: //归一化遥测
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP011: //标度化遥测
case (int)_101_config.IEC101_ASDU_MDIR_TYP_CODE.EN_IEC101_ASDU_TYP013: //浮点型遥测
if (_101_config._101_balance)
{ //平衡模式 回复确认报文
Send_Data.Send_Data_Fixed(0, 0, 0, (int)_101_config.IEC101_MDIR_LK_CODE.FUN_ACK);
}
if (_101_config.process == (int)_101_config.IEC_101_Process.GOING)
{
Send_Data.Send_Msg_Manage_bt();
}
break;
}
}
