private void LogInstructionToDebugger(S8Instruction instr)
{
if (VerboseMode)
{
var regs = GetChangedRegs();
if (!string.IsNullOrEmpty(regs))
{
LogMessage(regs);
}
instr.DecodeInstruction();
LogMessage(instr.Instruction2Text(state.pc, true));
prevRegs = (byte[])state.regs.Clone();
}
}
public UInt16 Dissasemble(UInt16 start, UInt16 length, bool showAddress = false, bool allowOutsideLoadedMemory = false)
{
S8Instruction s8i;
UInt16 currentAddress = start;
UInt16 endAddress = (UInt16)(currentAddress + length);
// Special - if no length givien, assume 20 instructions
if (length == 0)
{
endAddress = (UInt16)(currentAddress + 20);
//endAddress = cpu.state.memoryUsed;
}
if (!allowOutsideLoadedMemory)
{
if (endAddress > cpu.state.memoryUsed)
{
endAddress = cpu.state.memoryUsed;
}
}
// Dont read outside physical memory
if (endAddress > bytes.Length)
{
endAddress = (UInt16)(bytes.Length - 1);
}
while (currentAddress < endAddress)
{
int lineAddress = currentAddress;
byte opcode = bytes[currentAddress++];
byte param = bytes[currentAddress++];
s8i = new S8Instruction(opcode, param);
s8i.DecodeInstruction();
LogMessage(s8i.Instruction2Text(lineAddress, showAddress));
}
return(currentAddress);
}
public bool ExecuteInstruction(S8Instruction instr)
{
LogInstructionToDebugger(instr);
// STOPP
if (instr.operationClass == 0x0)
{
return(false);
}
// increase counter if we do anything else than STOPP
state.pc += 2;
// SETT
if (instr.operationClass == 0x1)
{
state.regs[instr.operation] = (byte)instr.value;
}
else if (instr.operationClass == 0x2)
{
state.regs[instr.operation] = state.regs[instr.argument1];
}
// FINN
else if (instr.operationClass == 0x3)
{
state.regs[1] = (byte)((instr.address & 0x0f00) >> 8);
state.regs[0] = (byte)(instr.address & 0xff);
}
// LOAD / STORE
else if (instr.operationClass == 0x4)
{
int addr = ((state.regs[1] << 8) | state.regs[0]) & 0xfff;
switch (instr.operation)
{
case 0: // LAST
state.regs[instr.argument1] = state.memory[addr];
break;
case 1: //LAGR
state.memory[addr] = (byte)state.regs[instr.argument1];
break;
#if _EXPERIMENTAL_
case 2: //VLAST
state.regs[instr.argument1] = this.HWDisplay.Memory[GetFrameBufferAddress()];
break;
case 3: //VLAGR
UInt16 hwaddr = GetFrameBufferAddress();
this.HWDisplay.Write(hwaddr, (byte)state.regs[instr.argument1]);
break;
#endif
default:
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
}
// ALU
else if (instr.operationClass == 0x5)
{
byte reg1 = state.regs[instr.argument1];
byte reg2 = state.regs[instr.argument2];
if (instr.operation == 0x0)
{
state.regs[instr.argument1] &= reg2;
}
else if (instr.operation == 0x1)
{
state.regs[instr.argument1] |= reg2;
}
else if (instr.operation == 0x2)
{
state.regs[instr.argument1] ^= reg2;
}
else if (instr.operation == 0x3)
{
state.regs[instr.argument1] = (byte)((reg1 << reg2) & 0xff);
}
else if (instr.operation == 0x4)
{
state.regs[instr.argument1] >>= reg2;
}
else if (instr.operation == 0x5)
{
state.regs[instr.argument1] = (byte)((reg1 + reg2) & 0xff);
}
else if (instr.operation == 0x6)
{
state.regs[instr.argument1] = (byte)((reg1 - reg2) & 0xff);
}
else
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
}
// I/O
else if (instr.operationClass == 0x6)
{
switch (instr.operation)
{
case 0x0: // LES
if (state.stdin.Length > state.inputPtr)
{
state.regs[instr.argument1] = state.stdin[state.inputPtr++];
}
else
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.readAfterEndOfInput]);
return(false);
}
break;
case 0x01: // SKRIV
{
// This limit broke the runner for the NPST 2021 day 7.
// It was put in as a security measure, but it created just pain :-(
// Removed!!!
//if (state.outputStream.Length > 1000)
//{
// LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
// return false;
//}
byte val = state.regs[instr.argument1];
//state.stdout += val.ToString("X2");
state.outputStream.Seek(0, SeekOrigin.End);
state.outputStream.WriteByte(val);
}
break;
#if _EXPERIMENTAL_
case 0x02: //INN
state.regs[instr.argument1] = this.HWIO.ReadIO(GetIOAddress());
break;
case 0x03: //UT
this.HWIO.WriteIO(GetIOAddress(), state.regs[instr.argument1]);
break;
case 0x04: //VSYNK
this.HWDisplay.VSync();
break;
#endif
default:
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
}
}
// CMP
else if (instr.operationClass == 0x7)
{
byte reg1 = state.regs[instr.argument1];
byte reg2 = state.regs[instr.argument2];
if (instr.operation == 0x0)
{
state.flag = reg1 == reg2;
}
else if (instr.operation == 0x1)
{
state.flag = reg1 != reg2;
}
else if (instr.operation == 0x2)
{
state.flag = reg1 < reg2;
}
else if (instr.operation == 0x3)
{
state.flag = reg1 <= reg2;
}
else if (instr.operation == 0x4)
{
state.flag = reg1 > reg2;
}
else if (instr.operation == 0x5)
{
state.flag = reg1 >= reg2;
}
else
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
}
// JMP
else if (instr.operationClass == 0x8)
{
state.pc = instr.address;
}
// COND JMP
else if (instr.operationClass == 0x9)
{
if (state.flag)
{
state.pc = instr.address;
}
}
// CALL
else if (instr.operationClass == 0xa)
{
if (!stack.Push(state.pc))
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.recursionLimitExceeded]);
return(false);
}
state.pc = instr.address;
}
// RET
else if (instr.operationClass == 0xb)
{
state.pc = stack.Pop();
if (state.pc < 0)
{
state.pc = 0;
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
}
else if (instr.operationClass == 0xc)
{
// No Op.. Do nothing
}
else
{
LogMessage(ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.segmentationFault]);
return(false);
}
return(true);
}
/// <summary>
/// Run the code "runSteps" number of cpu steps.
/// </summary>
/// <param name="runSteps">Number of CPU steps to run. 0 means no limit, runs until STOPP or crash</param>
/// <param name="verbose"></param>
/// <param name="showaddress"></param>
/// <returns></returns>
public bool RunSteps(int runSteps)
{
int stepsLeft = 1;// Default 1 step left
if (runSteps > 0)
{
stepsLeft = runSteps;
}
if (state.memoryUsed == 0)
{
LogMessage("No s8 program loaded");
return(false);
}
if (state.memoryUsed == 0)
{
return(false);
}
while ((stepsLeft > 0) && (!state.crashed))
{
// if there is a limit of how many steps we can run, reduce the steps left
if (runSteps > 0)
{
stepsLeft--;
}
if (++state.tick > state.maxTicks)
{
var strErr = ERROR_MESSAGE[(int)ERROR_MESSAGE_ID.resourcesExhausted].Replace("${maxTicks}", state.tick.ToString());
LogMessage(strErr);
return(false);
}
byte opcode = state.memory[state.pc];
byte param = state.memory[state.pc + 1];
//yield { pc, flag, regs, memory, stdout, inputPtr };
S8Instruction s8 = new S8Instruction(opcode, param);
if (!ExecuteInstruction(s8))
{
state.crashed = true;
}
// After each step in the CPU tell anyone listening to events about the step. Used to update UI
CpuStepInfo(state.pc);
if (state.breakpoints[state.pc])
{
return(true);
}
}
if (state.crashed)
{
return(false);
}
return(true);
}
