public Result UNITS_WEIGHT(ElementSymbol elementSymbol)
{
string value = Parser.GetRestOfTheLine(elementSymbol.SourceData[0]);
iv.UNITS_WEIGHT = value;
if (string.Equals(value, "KGS"))
{
iv.UNITS_WEIGHT_KGS = true;
iv.UNITS_WEIGHT_LBS = false;
return(Result.Succeeded);
}
if (string.Equals(value, "LBS"))
{
iv.UNITS_WEIGHT_KGS = false;
iv.UNITS_WEIGHT_LBS = true;
return(Result.Succeeded);
}
hm.ValueNotImplemented(elementSymbol, value);
return(Result.Failed);
}
public Result UNITS_CO_ORDS(ElementSymbol elementSymbol)
{
string value = Parser.GetRestOfTheLine(elementSymbol.SourceData[0]);
iv.UNITS_CO_ORDS = value;
if (string.Equals(value, "MM"))
{
iv.UNITS_CO_ORDS_MM = true;
iv.UNITS_CO_ORDS_INCH = false;
return(Result.Succeeded);
}
if (string.Equals(value, "INCH"))
{
iv.UNITS_CO_ORDS_MM = false;
iv.UNITS_CO_ORDS_INCH = true;
return(Result.Succeeded);
}
hm.ValueNotImplemented(elementSymbol, value);
return(Result.Failed);
}
public Result FLANGE(ElementSymbol elementSymbol)
{
foreach (string line in elementSymbol.SourceData)
{
Result result = pif.PcfDict.ProcessElementLevelKeywords(elementSymbol, line);
if (Result.Succeeded == result)
{
continue;
}
if (Result.Failed == result)
{
return(result);
}
}
elementSymbol.CentrePoint.Xyz = Util.Midpoint(elementSymbol.EndPoint1.Xyz, elementSymbol.EndPoint2.Xyz);
elementSymbol.CentrePoint.Initialized = true;
return(Result.Succeeded);
}
public Result PIPELINE_REFERENCE(ElementSymbol elementSymbol)
{
try
{
////Instantiate collector
//FilteredElementCollector collector = new FilteredElementCollector(doc);
////Get the elements
//collector.OfClass(typeof(PipingSystemType));
////Select correct systemType
//PipingSystemType sQuery = (from PipingSystemType st in collector
// where string.Equals(st.Abbreviation, elementSymbol.PipelineReference)
// select st).FirstOrDefault();
//elementSymbol.PipingSystemType = sQuery;
return(Result.Succeeded);
}
catch (Exception e)
{
Util.ErrorMsg(e.Message);
return(Result.Failed);
}
}
public Result END_POINT(ElementSymbol elementSymbol, string line)
{
StringCollection endPointLine = Parser.GetRestOfTheLineInStringCollection(line);
if (!elementSymbol.EndPoint1.Initialized)
{
elementSymbol.EndPoint1.Xyz = Parser.ParseXyz(endPointLine);
elementSymbol.EndPoint1.Diameter = Parser.ParseDiameter(endPointLine);
elementSymbol.EndPoint1.Initialized = true;
return(Result.Succeeded);
}
if (!elementSymbol.EndPoint2.Initialized)
{
elementSymbol.EndPoint2.Xyz = Parser.ParseXyz(endPointLine);
elementSymbol.EndPoint2.Diameter = Parser.ParseDiameter(endPointLine);
elementSymbol.EndPoint2.Initialized = true;
return(Result.Succeeded);
}
//The rest of line is ignored for now
Util.ErrorMsg("Element at line number " + elementSymbol.Position + " has more than two END-POINTS, which is not allowed!");
return(Result.Failed);
}
public Result PIPE(ElementSymbol elementSymbol)
{
try
{
//Choose pipe type.
ElementId pipeTypeId = elementSymbol.PipeType.Id;
//Collect levels and select one level
FilteredElementCollector collector = new FilteredElementCollector(PCFImport.doc);
ElementClassFilter levelFilter = new ElementClassFilter(typeof(Level));
ElementId levelId = collector.WherePasses(levelFilter).FirstElementId();
//Test if pipe shorter than 2 mm, if true abort the creation
if (Util.MinPipeLength > Util.Distance(elementSymbol.EndPoint1.Xyz, elementSymbol.EndPoint2.Xyz))
{
return(Result.Failed);
}
//Create pipe
Pipe pipe = Pipe.Create(PCFImport.doc, elementSymbol.PipingSystemType.Id, pipeTypeId, levelId,
elementSymbol.EndPoint1.Xyz, elementSymbol.EndPoint2.Xyz);
//Set pipe diameter
Parameter parameter = pipe.get_Parameter(BuiltInParameter.RBS_PIPE_DIAMETER_PARAM);
parameter.Set(elementSymbol.EndPoint1.Diameter);
//Store the reference for the created element in the ElementSymbol
elementSymbol.CreatedElement = (Element)pipe;
return(Result.Succeeded);
}
catch (Exception e)
{
Console.WriteLine(e);
return(Result.Failed);
}
}
public Result ISOGEN_FILES(ElementSymbol elementSymbol)
{
return(Result.Succeeded);
}
//private Document doc = PCFImport.doc; //This code to expose doc to class, because I don't want to pass it to each method in the chain
// //See http://forums.autodesk.com/t5/revit-api/accessing-the-document-from-c-form-externalcommanddata-issue/td-p/4773407
#region Top level keywords
public Result ELEMENT_TYPE_NOT_IMPLEMENTED(ElementSymbol elementSymbol)
{
return(Result.Succeeded);
}
public static void ValueNotImplemented(ElementSymbol elementSymbol, string value)
{
throw new Exception("Value " + value + " for " + elementSymbol.ElementType + " not implemented!\nSee program documentation for supported values.");
}
public Result ELEMENT_ATTRIBUTE_NOT_IMPLEMENTED(ElementSymbol elementSymbol, string line)
{
return(Result.Succeeded);
}
public static void ExtractElementConfiguration(DataSet dataSet, ElementSymbol es)
{
try
{
DataTableCollection dataTables = dataSet.Tables;
DataTable dataTable;
//Handle all pipelines or separate configuration setting
if (iv.ConfigureAll)
{
dataTable = (from DataTable dt in dataTables
where string.Equals(dt.TableName, "All pipelines")
select dt).FirstOrDefault();
}
else
{
dataTable = (from DataTable dt in dataTables
where string.Equals(dt.TableName, es.PipelineReference)
select dt).FirstOrDefault();
}
//query the element family and type is using the variables in the loop to query the dataset
EnumerableRowCollection <string> query = from value in dataTable.AsEnumerable()
where value.Field <string>(0) == es.PipelineReference
select value.Field <string>(es.ElementType);
string familyAndType = query.FirstOrDefault().ToString();
FilteredElementCollector collector = new FilteredElementCollector(PCF_Importer_form._doc);
ElementParameterFilter filter = Filter.ParameterValueFilter(familyAndType, BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM);
LogicalOrFilter classFilter = Filter.FamSymbolsAndPipeTypes();
Element familySymbol = collector.WherePasses(classFilter).WherePasses(filter).FirstOrDefault();
if (es.ElementType == "PIPE")
{
es.PipeType = (PipeType)familySymbol;
}
else
{
es.FamilySymbol = (FamilySymbol)familySymbol;
}
//query the corresponding pipe family and type to add to the element symbol
//This is because pipe type is needed to create certain fittings
if (es.ElementType != "PIPE" || es.ElementType != "OLET") //Exclude olets -- they are handled next
{
EnumerableRowCollection <string> queryPipeType = from value in dataTable.AsEnumerable()
where value.Field <string>(0) == es.PipelineReference
select value.Field <string>("PIPE");
string pipeTypeName = queryPipeType.FirstOrDefault();
FilteredElementCollector collectorPipeType = new FilteredElementCollector(PCF_Importer_form._doc);
ElementParameterFilter filterPipeTypeName = Filter.ParameterValueFilter(pipeTypeName, BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM);
Element pipeType = collectorPipeType.OfClass(typeof(PipeType)).WherePasses(filterPipeTypeName).FirstOrDefault();
es.PipeType = (PipeType)pipeType;
}
if (es.ElementType == "OLET") //Get the TAP pipetype for olets
{
EnumerableRowCollection <string> queryPipeType = from value in dataTable.AsEnumerable()
where value.Field <string>(0) == "Olet"
select value.Field <string>("PIPE");
string pipeTypeName = queryPipeType.FirstOrDefault();
FilteredElementCollector collectorPipeType = new FilteredElementCollector(PCF_Importer_form._doc);
ElementParameterFilter filterPipeTypeName = Filter.ParameterValueFilter(pipeTypeName, BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM);
Element pipeType = collectorPipeType.OfClass(typeof(PipeType)).WherePasses(filterPipeTypeName).FirstOrDefault();
es.PipeType = (PipeType)pipeType;
}
}
catch (Exception e)
{
Console.WriteLine(e);
}
}
public Result ELBOW(ElementSymbol elementSymbol)
{
try
{
//Choose pipe type.Hardcoded value until a configuring process is devised.
//FilteredElementCollector collector = new FilteredElementCollector(PCFImport.doc);
//Filter filter = new Filter("EN 10253-2 - Elbow: 3D", BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM); //Hardcoded until implements
//Applying a fast filter first (OfCategory) to reduce load on slow filter (WherePasses).
//FamilySymbol elbowSymbol = collector.OfCategory(BuiltInCategory.OST_PipeFitting).WherePasses(filter.epf).Cast<FamilySymbol>().FirstOrDefault();
//if (elbowSymbol == null)
//{
// Util.ErrorMsg("Family and Type for ELBOW at position " + elementSymbol.Position + " was not found.");
// return Result.Failed;
//}
#region Placing by face reference
////Build a direct shape with TessellatedShapeBuilder
//List<XYZ> args = new List<XYZ>(3);
//TessellatedShapeBuilder builder = new TessellatedShapeBuilder();
////http://thebuildingcoder.typepad.com/blog/2014/05/directshape-performance-and-minimum-size.html
//builder.OpenConnectedFaceSet(false);
//args.Add(elementSymbol.CentrePoint.Xyz);
//args.Add(elementSymbol.EndPoint1.Xyz);
//args.Add(elementSymbol.EndPoint2.Xyz);
//builder.AddFace(new TessellatedFace(args,ElementId.InvalidElementId));
//builder.CloseConnectedFaceSet();
//builder.Build();
//TessellatedShapeBuilderResult result = builder.GetBuildResult();
//var resultList = result.GetGeometricalObjects();
//var solidShape = resultList[0] as Solid;
//Face face = solidShape.Faces.get_Item(0);
//DirectShape ds = DirectShape.CreateElement(PCFImport.doc, new ElementId(BuiltInCategory.OST_GenericModel));
//ds.ApplicationId = "Application id";
//ds.ApplicationDataId = "Geometry object id";
//ds.Name = "Elbow " + elementSymbol.Position;
//DirectShapeOptions dso = ds.GetOptions();
//dso.ReferencingOption = DirectShapeReferencingOption.Referenceable;
//ds.SetOptions(dso);
//ds.SetShape(resultList);
//Options options = new Options();
//options.ComputeReferences = true;
//PCFImport.doc.Regenerate();
//FilteredElementCollector collectorDs = new FilteredElementCollector(PCFImport.doc);
//collectorDs.OfClass(typeof (DirectShape));
//var query = from Element e in collectorDs
// where string.Equals(e.Name, "Elbow " + elementSymbol.Position)
// select e;
//Element elem = query.FirstOrDefault();
//var geometryElement = elem.get_Geometry(options);
//;
//Face face = null;
//foreach (GeometryObject geometry in geometryElement)
//{
// Solid instance = geometry as Solid;
// if (null == instance || 0 == instance.Faces.Size || 0 == instance.Edges.Size) { continue; }
// // Get the faces
// foreach (Face f in instance.Faces)
// {
// face = f;
// }
//}
//;
//if (face == null)
//{
// Util.ErrorMsg("No valid face detected to place the fitting for element at position "+elementSymbol.Position);
// return Result.Failed;
//}
//var faceRef = face.Reference;
//;
////Finally place the elbow
////Direction -- third parameter to the create method
//XYZ vC = elementSymbol.EndPoint1.Xyz - elementSymbol.CentrePoint.Xyz;
//Element element = PCFImport.doc.Create.NewFamilyInstance(faceRef, elementSymbol.CentrePoint.Xyz, vC,
// (FamilySymbol) elbowSymbol);
#endregion
#region Create by NewElbowFitting
//Get all pipe connectors
HashSet <Connector> allPipeConnectors = ch.GetAllPipeConnectors();
//Get the actual endpoints of the elbow
XYZ p1 = elementSymbol.EndPoint1.Xyz; XYZ p2 = elementSymbol.EndPoint2.Xyz;
//Determine the corresponding pipe connectors
var c1 = (from Connector c in allPipeConnectors where Util.IsEqual(p1, c.Origin) select c).FirstOrDefault();
var c2 = (from Connector c in allPipeConnectors where Util.IsEqual(p2, c.Origin) select c).FirstOrDefault();
//Handle the missing connectors by creating dummy pipes
Pipe pipe1 = null; Pipe pipe2 = null;
if (c1 == null)
{
pipe1 = ch.CreateDummyPipe(p1, elementSymbol.CentrePoint.Xyz, elementSymbol.EndPoint1, elementSymbol);
c1 = ch.MatchConnector(p1, pipe1);
}
if (c2 == null)
{
pipe2 = ch.CreateDummyPipe(p2, elementSymbol.CentrePoint.Xyz, elementSymbol.EndPoint2, elementSymbol);
c2 = ch.MatchConnector(p2, pipe2);
}
if (c1 != null && c2 != null)
{
Element element = PCFImport.doc.Create.NewElbowFitting(c1, c2);
if (pipe1 != null)
{
PCFImport.doc.Delete(pipe1.Id);
}
if (pipe2 != null)
{
PCFImport.doc.Delete(pipe2.Id);
}
elementSymbol.CreatedElement = element;
PCFImport.doc.Regenerate();
return(Result.Succeeded);
}
//If this point is reached, something has failed
return(Result.Failed);
#endregion
#region Create by Directly Placing families
//Element element = PCFImport.doc.Create.NewFamilyInstance(elementSymbol.CentrePoint.Xyz, (FamilySymbol)elbowSymbol, StructuralType.NonStructural);
//FamilyInstance elbow = (FamilyInstance)element;
//double diameter = elementSymbol.EndPoint1.Diameter;
//elbow.LookupParameter("Nominal Diameter").Set(diameter); //Implement a procedure to select the parameter by name supplied by user
////Begin geometric analysis to rotate the endpoints to actual locations
////Get connectors from the placed family
//ConnectorSet cs = ((FamilyInstance)element).MEPModel.ConnectorManager.Connectors;
//Connector familyConnector1 = (from Connector c in cs where true select c).First();
//Connector familyConnector2 = (from Connector c in cs where true select c).Last();
//XYZ vA = familyConnector1.Origin - elementSymbol.CentrePoint.Xyz; //To define a vector: v = p2 - p1
//XYZ vC = elementSymbol.EndPoint1.Xyz - elementSymbol.CentrePoint.Xyz;
//XYZ vB = familyConnector2.Origin - elementSymbol.CentrePoint.Xyz; //To define a vector: v = p2 - p1
//XYZ vD = elementSymbol.EndPoint2.Xyz - elementSymbol.CentrePoint.Xyz;
//XYZ normRotAxis = vC.CrossProduct(vA).Normalize();
//#region Fun with model lines
//Filter filtermarker = new Filter("Marker: Marker", BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM); //Hardcoded until implements
//FamilySymbol markerSymbol = new FilteredElementCollector(PCFImport.doc).WherePasses(filtermarker.epf).Cast<FamilySymbol>().FirstOrDefault();
//XYZ A = vC.CrossProduct(vA);
//XYZ B = vD.CrossProduct(vB);
//Element marker = PCFImport.doc.Create.NewFamilyInstance(elementSymbol.CentrePoint.Xyz.Add(A), markerSymbol, StructuralType.NonStructural);
////Helper.PlaceAdaptiveMarkerLine("Red", elementSymbol.CentrePoint.Xyz, elementSymbol.CentrePoint.Xyz.Add(A));
////Helper.PlaceAdaptiveMarkerLine("Green", elementSymbol.CentrePoint.Xyz, elementSymbol.CentrePoint.Xyz.Add(B));
//#endregion
//Line rotLine = Line.CreateBound(elementSymbol.CentrePoint.Xyz, elementSymbol.EndPoint1.Xyz);
//double rotAngle = Math.PI;
////double dotProduct = vC.DotProduct(vA);
////double rotAngle = System.Math.Acos(dotProduct);
////var rotLine = Line.CreateUnbound(elementSymbol.CentrePoint.Xyz, normRotAxis); //Rotation line must be BOUND!!!!
//////Test rotation
////Transform trf = Transform.CreateRotationAtPoint(normRotAxis, rotAngle, elementSymbol.CentrePoint.Xyz);
////XYZ testRotation = trf.OfVector(vA).Normalize();
////if ((vC.DotProduct(testRotation) > 0.00001) == false) rotAngle = -rotAngle;
//elbow.Location.Rotate(rotLine, rotAngle);
////Store the reference of the created element in the symbol object.
//elementSymbol.CreatedElement = element;
//;
#endregion
}
catch (Exception e)
{
Console.WriteLine(e);
throw new Exception(e.Message);
}
}
public Result VALVE(ElementSymbol elementSymbol)
{
try
{
#region Valve as AdaptiveElement
//elementSymbol.CreatedElement = Helper.PlaceAdaptiveFamilyInstance("GenValve: Std", elementSymbol.EndPoint1.Xyz,
// elementSymbol.EndPoint2.Xyz);
//Parameter sizeParameter = elementSymbol.CreatedElement.LookupParameter("Nominal Diameter");
//sizeParameter.Set(elementSymbol.EndPoint1.Diameter);
//return Result.Succeeded;
#endregion
//The strange symbol activation thingie...
//See: http://thebuildingcoder.typepad.com/blog/2014/08/activate-your-family-symbol-before-using-it.html
if (!elementSymbol.FamilySymbol.IsActive)
{
elementSymbol.FamilySymbol.Activate();
PCFImport.doc.Regenerate();
}
//Place the instance at calculated midpoint
Element valve = PCFImport.doc.Create.NewFamilyInstance(elementSymbol.CentrePoint.Xyz, elementSymbol.FamilySymbol, StructuralType.NonStructural);
//Get all pipe connectors
HashSet <Connector> allConnectors = ch.GetALLConnectors(valve.Document);
//Get the actual endpoints of the valve
XYZ p1 = elementSymbol.EndPoint1.Xyz; XYZ p2 = elementSymbol.EndPoint2.Xyz;
//Get the primary connector of valve
Connector c1 = ch.GetPrimaryConnector(ch.GetConnectorSet(valve));
//Determine the corresponding connectors from all, if not found -- abort
Connector c2 = (from Connector c in allConnectors where Util.IsEqual(p1, c.Origin) select c).FirstOrDefault() ??
(from Connector c in allConnectors where Util.IsEqual(p2, c.Origin) select c).FirstOrDefault();
Pipe pipe1 = null;
if (c2 != null)
{
pipe1 = c2.Owner as Pipe;
}
if (c2 == null)
{
pipe1 = ch.CreateDummyPipe(p1, p2, elementSymbol.EndPoint1, elementSymbol);
c2 = ch.MatchConnector(p1, pipe1);
elementSymbol.DummyToDelete = pipe1;
}
ch.RotateElementInPosition(elementSymbol, c1, c2, valve);
Parameter sizeParameter = valve.LookupParameter("Nominal Diameter"); //Hardcoded until inmplement
sizeParameter.Set(pipe1.Diameter);
Parameter lengthParameter = valve.LookupParameter("Length"); //Hardcoded until inmplement
lengthParameter.Set(Util.Distance(p1, p2));
elementSymbol.CreatedElement = valve;
return(Result.Succeeded);
}
catch (Exception e)
{
Console.WriteLine(e);
return(Result.Failed);
//throw new Exception("Valve creation generated following error: " + e.Message);
}
}
public Result CAP(ElementSymbol elementSymbol)
{
try
{
//The CAP has two end-points and no way to know which one of them to use to place the family
//Sooo... we match both end points to existing connectors in project to determine which one of them to use
FilteredElementCollector allElementsWithConnectors =
ch.GetElementsWithConnectors(PCFImport.doc);
XYZ firstMatch = null;
XYZ secondMatch = null;
firstMatch = (
from elem in allElementsWithConnectors
//Get all elements with connectors in PCFImport.document in a collector
select ch.GetConnectorSet(elem)
//Retrieve the connector set of each element in collector
into connectorSet //Pass it on
from Connector c in connectorSet //Declare that we are looking at the connectors
where Util.IsEqual(elementSymbol.EndPoint1.Xyz, c.Origin)
//Compare the location from the symbol to each connector in the PCFImport.document
select c.Origin).FirstOrDefault(); //Break on first match
secondMatch = (
from elem in allElementsWithConnectors
//Get all elements with connectors in PCFImport.document in a collector
select ch.GetConnectorSet(elem)
//Retrieve the connector set of each element in collector
into connectorSet //Pass it on
from Connector c in connectorSet //Declare that we are looking at the connectors
where Util.IsEqual(elementSymbol.EndPoint2.Xyz, c.Origin)
//Compare the location from the symbol to each connector in the PCFImport.document
select c.Origin).FirstOrDefault(); //Break on first match
//If no matching location is found -- fail the operation
if (firstMatch == null && secondMatch == null)
{
Util.ErrorMsg("Placement location for CAP at position " + elementSymbol.Position +
" could not be determined.");
return(Result.Failed);
}
//Select the correct location for placement assuming always only one correct match
XYZ placementLocation = null;
PointInSpace placementEnd = null;
XYZ otherLocation = null;
PointInSpace otherEnd = null;
if (firstMatch != null)
{
placementLocation = firstMatch;
placementEnd = elementSymbol.EndPoint1;
otherLocation = elementSymbol.EndPoint2.Xyz;
otherEnd = elementSymbol.EndPoint2;
}
else
{
placementLocation = secondMatch;
placementEnd = elementSymbol.EndPoint2;
otherLocation = elementSymbol.EndPoint1.Xyz;
otherEnd = elementSymbol.EndPoint1;
}
//Place the instance
Element cap = PCFImport.doc.Create.NewFamilyInstance(placementLocation, elementSymbol.FamilySymbol,
StructuralType.NonStructural);
ConnectorSet conSet = ch.GetConnectorSet(cap);
//The CAP should only have one connector
Connector c1 = (from Connector c in conSet where true select c).FirstOrDefault();
Pipe pipe1 = null;
//Get all pipe connectors
HashSet <Connector> allPipeConnectors = ch.GetAllPipeConnectors();
//Determine the corresponding pipe connectors
Connector c2 =
(from Connector c in allPipeConnectors where Util.IsEqual(placementLocation, c.Origin) select c)
.FirstOrDefault();
if (c2 != null)
{
pipe1 = c2.Owner as Pipe;
}
////Find the other connector (again...)
//Connector c2 = (
// from elem in allElementsWithConnectors //Get all elements with connectors in PCFImport.document in a collector
// select CreatorHelper.GetConnectorSet(elem) //Retrieve the connector set of each element in collector
// into connectorSet //Pass it on
// from Connector c in connectorSet //Declare that we are looking at the connectors
// where Util.IsEqual(c1.Origin, c.Origin) //Compare the connector from the cap to each connector in the PCFImport.document
// select c).FirstOrDefault(); //Break on first match
//Create a dummy pipe to attach the cap to
if (c2 == null)
{
pipe1 = ch.CreateDummyPipe(placementLocation, otherLocation, placementEnd, elementSymbol);
c2 = ch.MatchConnector(placementLocation, pipe1);
elementSymbol.DummyToDelete = pipe1;
}
#region Geometric manipulation
//http://thebuildingcoder.typepad.com/blog/2012/05/create-a-pipe-cap.html
Connector capConnector = c1;
Connector start = c2;
//Select the OTHER connector
MEPCurve hostPipe = start.Owner as MEPCurve;
Connector end = (from Connector c in hostPipe.ConnectorManager.Connectors
where (int)c.ConnectorType == 1 && c.Id != start.Id
select c).FirstOrDefault();
XYZ dir = (start.Origin - end.Origin).Normalize();
XYZ pipeHorizontalDirection = new XYZ(dir.X, dir.Y, 0.0).Normalize(); //Only for horizontal pipes! Fix this if the pipes are in any other direction
XYZ connectorDirection = -capConnector.CoordinateSystem.BasisZ;
double zRotationAngle = pipeHorizontalDirection.AngleTo(connectorDirection);
Transform trf = Transform.CreateRotationAtPoint(XYZ.BasisZ, zRotationAngle, start.Origin);
XYZ testRotation = trf.OfVector(connectorDirection).Normalize();
if (Math.Abs(testRotation.DotProduct(pipeHorizontalDirection) - 1) > 0.00001)
{
zRotationAngle = -zRotationAngle;
}
Line axis = Line.CreateBound(start.Origin, start.Origin + XYZ.BasisZ); //CREATE BOUND FOR ROTATION FFS!!!! It cost me two days of frustration
cap.Location.Rotate(axis, zRotationAngle);
#endregion
#region Debug
//var marker = Helper.PlaceAdaptiveMarkerLine("Green", start.Origin, start.Origin + XYZ.BasisZ);
//Parameter parameter = cap.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS);
//parameter.Set(Conversion.RadianToDegree(zRotationAngle).ToString());
////Determine the actual axis of rotation
//XYZ newConnectorDirection = -capConnector.CoordinateSystem.BasisZ;
//XYZ actualAxis = (connectorDirection.CrossProduct(newConnectorDirection)).Normalize();
//var markerActualAxis = Helper.PlaceAdaptiveMarkerLine("Red", start.Origin, start.Origin + actualAxis);
////Marker line at original connector direction
//Helper.PlaceAdaptiveMarkerLine("Yellow", start.Origin, start.Origin + pipeHorizontalDirection);
////Marker line at new connector direction
//Helper.PlaceAdaptiveMarkerLine("Orange", start.Origin, start.Origin + connectorDirection);
#endregion
Parameter sizeParameter = cap.LookupParameter("Nominal Diameter 1"); //Hardcoded until inmplement
sizeParameter.Set(pipe1.Diameter);
elementSymbol.CreatedElement = cap;
c1.ConnectTo(c2);
return(Result.Succeeded);
}
catch (Exception e)
{
Console.WriteLine(e);
//throw new Exception(e.Message);
}
return(Result.Failed);
}
public Result TEE(ElementSymbol elementSymbol)
{
try
{
//Determine if the tee is reducing. Move this to PARSER?
if (!elementSymbol.Branch1Point.Diameter.Equals(elementSymbol.EndPoint1.Diameter))
{
elementSymbol.IsReducing = true;
}
#region ByPlacingFamilyInstance
//Filter filter;
//if (!elementSymbol.IsReducing) filter = new Filter("EN 10253-2 - Tee: Tee Type B", BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM);
//else filter = new Filter("EN 10253-2 - Reducing Tee: Red Tee Type B", BuiltInParameter.SYMBOL_FAMILY_AND_TYPE_NAMES_PARAM);
//FamilySymbol teeSymbol = collector.WherePasses(filter.epf).Cast<FamilySymbol>().FirstOrDefault();
//if (teeSymbol == null)
//{
// Util.ErrorMsg("Family and Type for TEE at position " + elementSymbol.Position + " was not found.");
// return Result.Failed;
//}
//Element element = PCFImport.doc.Create.NewFamilyInstance(elementSymbol.CentrePoint.Xyz, teeSymbol, StructuralType.NonStructural);
//FamilyInstance tee = (FamilyInstance)element;
//double mainDiameter = elementSymbol.EndPoint1.Diameter;
//double branchDiameter = elementSymbol.Branch1Point.Diameter;
//tee.LookupParameter("Nominal Diameter 1").Set(mainDiameter); //Implement a procedure to select the parameter by name supplied by user
//if (elementSymbol.IsReducing) tee.LookupParameter("Nominal Diameter 3").Set(branchDiameter);
#endregion
//Get all pipe connectors
HashSet <Connector> allPipeConnectors = ch.GetAllPipeConnectors();
//Get the actual endpoints of the elbow
XYZ p1 = elementSymbol.EndPoint1.Xyz; XYZ p2 = elementSymbol.EndPoint2.Xyz; XYZ p3 = elementSymbol.Branch1Point.Xyz;
//Determine the corresponding pipe connectors
var c1 = (from Connector c in allPipeConnectors where Util.IsEqual(p1, c.Origin) select c).FirstOrDefault();
var c2 = (from Connector c in allPipeConnectors where Util.IsEqual(p2, c.Origin) select c).FirstOrDefault();
var c3 = (from Connector c in allPipeConnectors where Util.IsEqual(p3, c.Origin) select c).FirstOrDefault();
//Handle the missing connectors by creating dummy pipes
Pipe pipe1 = null; Pipe pipe2 = null; Pipe pipe3 = null;
if (c1 == null)
{
pipe1 = ch.CreateDummyPipe(p1, elementSymbol.CentrePoint.Xyz, elementSymbol.EndPoint1, elementSymbol);
c1 = ch.MatchConnector(p1, pipe1);
}
if (c2 == null)
{
pipe2 = ch.CreateDummyPipe(p2, elementSymbol.CentrePoint.Xyz, elementSymbol.EndPoint2, elementSymbol);
c2 = ch.MatchConnector(p2, pipe2);
}
if (c3 == null)
{
pipe3 = ch.CreateDummyPipe(p3, elementSymbol.CentrePoint.Xyz, elementSymbol.Branch1Point, elementSymbol);
c3 = ch.MatchConnector(p3, pipe3);
}
if (c1 != null && c2 != null && c3 != null)
{
Element element = PCFImport.doc.Create.NewTeeFitting(c1, c2, c3);
if (pipe1 != null)
{
PCFImport.doc.Delete(pipe1.Id);
}
if (pipe2 != null)
{
PCFImport.doc.Delete(pipe2.Id);
}
if (pipe3 != null)
{
PCFImport.doc.Delete(pipe3.Id);
}
elementSymbol.CreatedElement = element;
PCFImport.doc.Regenerate();
return(Result.Succeeded);
}
//If this point is reached, something has failed
return(Result.Failed);
}
catch (Exception e)
{
Console.WriteLine(e);
throw new Exception(e.Message);
}
}