private float GetAvionicsToolingCost(float diameter, float length)
{
var toolingLevel = ToolingDatabase.GetToolingLevel(ToolingType, ControllableMass, diameter, length);
var toolingCosts = GetPerLevelToolingCosts(diameter, length);
return(GetToolingCost(toolingLevel, toolingCosts));
}
public override void PurchaseTooling()
{
float d, l;
GetDimensions(out d, out l);
ToolingDatabase.UnlockTooling(toolingType, d, l);
}
public override void OnLoad(ConfigNode node)
{
base.OnLoad(node);
ToolingDatabase.Load(node.GetNode("Tooling"));
EnsureDefinitionsLoaded();
}
public override bool IsUnlocked()
{
GetDimensions(out var d, out var l);
if (d < minDiameter)
{
return(true);
}
return(ToolingDatabase.GetToolingLevel(ToolingType, d, l) == 2);
}
private void UnlockInternalTankTooling(float diameter, float length)
{
if (_procAvionics.InternalTanksVolume == 0)
{
return;
}
var internalTankDiameter = GetInternalTankDiameter(diameter, length);
ToolingDatabase.UnlockTooling(TankToolingType, internalTankDiameter, internalTankDiameter);
}
private bool IsInternalTankTooled(float diameter, float length)
{
if (_procAvionics.InternalTanksVolume == 0)
{
return(true);
}
var internalTankDiameter = GetInternalTankDiameter(diameter, length);
return(ToolingDatabase.GetToolingLevel(TankToolingType, internalTankDiameter, internalTankDiameter) == 2);
}
private float GetCostReductionFactor(float d, float l)
{
foreach (string s in CostReducers)
{
if (ToolingDatabase.GetToolingLevel(s, d, l) > 0)
{
return(costReductionMult);
}
}
return(1);
}
public override bool IsUnlocked()
{
float d, l;
GetDimensions(out d, out l);
if (d < minDiameter)
{
return(true);
}
return(ToolingDatabase.HasTooling(toolingType, d, l) == ToolingDatabase.ToolingLevel.Full);
}
public override float GetToolingCost()
{
GetDimensions(out var d, out var l);
float cost = GetLengthToolingCost(d, l);
if (ToolingDatabase.GetToolingLevel(ToolingType, d, l) == 0)
{
var reductionFactor = GetCostReductionFactor(d, l);
cost += reductionFactor * GetDiameterToolingCost(d);
}
return(cost * finalToolingCostMultiplier);
}
private float GetInternalTankToolingCost(float externalDiameter, float length)
{
if (_procAvionics.InternalTanksVolume == 0)
{
return(0);
}
var internalTankDiameter = GetInternalTankDiameter(externalDiameter, length);
var level = ToolingDatabase.GetToolingLevel(TankToolingType, internalTankDiameter, internalTankDiameter);
var perLevelCosts = new[] { GetDiameterToolingCost(internalTankDiameter), GetLengthToolingCost(internalTankDiameter, internalTankDiameter) };
var costMult = TankToolingDefinition?.finalToolingCostMultiplier ?? 0f;
return(GetToolingCost(level, perLevelCosts) * costMult);
}
/// <summary>
/// Use for purchasing multiple toolings at once. Does it's best to determine the best order to buy them so that the cost would be minimal.
/// Also deducuts the funds required for purchase.
/// Has an option for running a simulation to calculate the accurate cost of toolings while the tooling DB and funds are left untouched.
/// </summary>
/// <param name="toolingColl">Collection of toolings to purchase.</param>
/// <param name="isSimulation">Whether to simulate the purchase to get the accurate cost of all toolings.</param>
/// <returns>Total cost of all the toolings purchased.</returns>
public static float PurchaseToolingBatch(List <ModuleTooling> toolingColl, bool isSimulation = false)
{
ConfigNode toolingBackup = null;
if (isSimulation)
{
toolingBackup = new ConfigNode();
ToolingDatabase.Save(toolingBackup);
}
float totalCost = 0;
try
{
// Currently all cost reducers are applied correctly when the tooling types are first sorted in alphabetical order
toolingColl.Sort((mt1, mt2) => mt1.ToolingType.CompareTo(mt2.ToolingType));
//TODO: find the most optimal order to purchase toolings that have diameter and length.
// If there are diameters 2.9; 3 and 3.1 only 3 needs to be purchased and others will fit inside the stretch margin.
toolingColl.ForEach(mt =>
{
if (mt.IsUnlocked())
{
return;
}
totalCost += mt.GetToolingCost();
mt.PurchaseTooling();
});
if (totalCost > 0 && !isSimulation)
{
Funding.Instance.AddFunds(-totalCost, TransactionReasons.RnDPartPurchase);
}
}
finally
{
if (isSimulation)
{
ToolingDatabase.Load(toolingBackup);
}
}
return(totalCost);
}
/// <summary>
/// Checks whether two toolings are considered the same by checking their types and dimensions (if applicable).
/// Dimension comparison is done with an error margin of 4%.
/// </summary>
/// <param name="a">Tooling 1</param>
/// <param name="b">Tooling 2</param>
/// <returns>True if toolings match</returns>
public static bool IsSame(ModuleTooling a, ModuleTooling b)
{
if (a.ToolingType != b.ToolingType) return false;
if (a is ModuleToolingDiamLen || b is ModuleToolingDiamLen)
{
var d1 = a as ModuleToolingDiamLen;
var d2 = b as ModuleToolingDiamLen;
if (d1 == null || d2 == null) return false;
d1.GetDimensions(out float diam1, out float len1);
d2.GetDimensions(out float diam2, out float len2);
return ToolingDatabase.IsSameSize(diam1, len1, diam2, len2);
}
return true;
}
public override float GetToolingCost()
{
float d, l;
GetDimensions(out d, out l);
float cost = lengthToolingCost.x * d * d + lengthToolingCost.y * d + lengthToolingCost.z * l + lengthToolingCost.w;
if (ToolingDatabase.HasTooling(toolingType, d, l) == ToolingDatabase.ToolingLevel.None)
{
float mult = 1f;
foreach (string s in reducers)
{
if (ToolingDatabase.HasTooling(s, d, l) > ToolingDatabase.ToolingLevel.None)
{
mult = costReductionMult;
break;
}
}
cost += mult * (diameterToolingCost.x * d * d + diameterToolingCost.y * d + diameterToolingCost.z);
}
return(cost * finalToolingCostMultiplier);
}
public override void PurchaseTooling()
{
GetDimensions(out var diameter, out var length);
ToolingDatabase.UnlockTooling(ToolingType, ControllableMass, diameter, length);
UnlockInternalTankTooling(diameter, length);
}
private bool IsAvionicsTooled(float diameter, float length) => ToolingDatabase.GetToolingLevel(ToolingType, ControllableMass, diameter, length) == 3;
public override void OnLoad(ConfigNode node)
{
base.OnLoad(node);
ToolingDatabase.Load(node.GetNode("Tooling"));
}
public override void PurchaseTooling()
{
GetDimensions(out var d, out var l);
ToolingDatabase.UnlockTooling(ToolingType, d, l);
}
public override void OnSave(ConfigNode node)
{
ToolingDatabase.Save(node.AddNode("Tooling"));
}
