public void UpdateConnections(ProcessStreamBaseControl streamCtrl)
{
string name = streamCtrl.ProcessStreamBase.Name;
PointOrientation inOrientation = streamCtrl.InOrientation;
int inIdx = ProcessStreamBaseControl.IN_INDEX;
Point inPoint = streamCtrl.GetInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation outOrientation = streamCtrl.OutOrientation;
int outIdx = ProcessStreamBaseControl.OUT_INDEX;
Point outPoint = streamCtrl.GetOutConnectionPoint();
ConnectionPoint outCp = new ConnectionPoint(outIdx, name, outPoint, outOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.StreamPoint.Equals(inCp))
{
dc.StreamPoint.Point = inPoint;
dc.StreamPoint.Orientation = inOrientation;
}
if (dc.StreamPoint.Equals(outCp))
{
dc.StreamPoint.Point = outPoint;
dc.StreamPoint.Orientation = outOrientation;
}
}
this.DrawConnections();
}
public void UpdateConnections(DryerControl dryerCtrl)
{
string name = dryerCtrl.Dryer.Name;
PointOrientation gasInOrientation = DryerControl.GAS_INLET_ORIENTATION;
int gasInIdx = Dryer.GAS_INLET_INDEX;
Point gasInPoint = dryerCtrl.GetGasInConnectionPoint();
ConnectionPoint gasInCp = new ConnectionPoint(gasInIdx, name, gasInPoint, gasInOrientation);
PointOrientation gasOutOrientation = DryerControl.GAS_OUTLET_ORIENTATION;
int gasOutIdx = Dryer.GAS_OUTLET_INDEX;
Point gasOutPoint = dryerCtrl.GetGasOutConnectionPoint();
ConnectionPoint gasOutCp = new ConnectionPoint(gasOutIdx, name, gasOutPoint, gasOutOrientation);
PointOrientation matInOrientation = DryerControl.MATERIAL_INLET_ORIENTATION;
int matInIdx = Dryer.MATERIAL_INLET_INDEX;
Point matInPoint = dryerCtrl.GetMaterialInConnectionPoint();
ConnectionPoint matInCp = new ConnectionPoint(matInIdx, name, matInPoint, matInOrientation);
PointOrientation matOutOrientation = DryerControl.MATERIAL_OUTLET_ORIENTATION;
int matOutIdx = Dryer.MATERIAL_OUTLET_INDEX;
Point matOutPoint = dryerCtrl.GetMaterialOutConnectionPoint();
ConnectionPoint matOutCp = new ConnectionPoint(matOutIdx, name, matOutPoint, matOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(gasInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = gasInPoint;
}
if (dc.UnitOpPoint.Equals(gasOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = gasOutPoint;
}
if (dc.UnitOpPoint.Equals(matInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = matInPoint;
}
if (dc.UnitOpPoint.Equals(matOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = matOutPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void UpdateConnections(WetScrubberControl wetScrubberCtrl)
{
string name = wetScrubberCtrl.WetScrubber.Name;
PointOrientation gasInOrientation = WetScrubberControl.GAS_INLET_ORIENTATION;
int gasInIdx = WetScrubber.GAS_INLET_INDEX;
Point gasInPoint = wetScrubberCtrl.GetGasInConnectionPoint();
ConnectionPoint gasInCp = new ConnectionPoint(gasInIdx, name, gasInPoint, gasInOrientation);
PointOrientation gasOutOrientation = WetScrubberControl.GAS_OUTLET_ORIENTATION;
int gasOutIdx = WetScrubber.GAS_OUTLET_INDEX;
Point gasOutPoint = wetScrubberCtrl.GetGasOutConnectionPoint();
ConnectionPoint gasOutCp = new ConnectionPoint(gasOutIdx, name, gasOutPoint, gasOutOrientation);
PointOrientation liquidInOrientation = WetScrubberControl.LIQUID_INLET_ORIENTATION;
int liquidInIdx = WetScrubber.LIQUID_INLET_INDEX;
Point liquidInPoint = wetScrubberCtrl.GetLiquidInConnectionPoint();
ConnectionPoint liquidInCp = new ConnectionPoint(liquidInIdx, name, liquidInPoint, liquidInOrientation);
PointOrientation liquidOutOrientation = WetScrubberControl.LIQUID_OUTLET_ORIENTATION;
int liquidOutIdx = WetScrubber.LIQUID_OUTLET_INDEX;
Point liquidOutPoint = wetScrubberCtrl.GetLiquidOutConnectionPoint();
ConnectionPoint liquidOutCp = new ConnectionPoint(liquidOutIdx, name, liquidOutPoint, liquidOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(gasInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = gasInPoint;
}
if (dc.UnitOpPoint.Equals(gasOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = gasOutPoint;
}
if (dc.UnitOpPoint.Equals(liquidInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = liquidInPoint;
}
if (dc.UnitOpPoint.Equals(liquidOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = liquidOutPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void RemoveConnections(string strName, string uoName)
{
if (this.Connections.Count > 0)
{
ArrayList toDeleteConnections = new ArrayList();
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.StreamPoint.Name.Equals(strName) && dc.UnitOpPoint.Name.Equals(uoName))
{
toDeleteConnections.Add(dc);
}
}
if (toDeleteConnections.Count > 0)
{
IEnumerator e2 = toDeleteConnections.GetEnumerator();
while (e2.MoveNext())
{
SolvableConnection conn = (SolvableConnection)e2.Current;
this.Connections.Remove(conn);
}
this.DrawConnections();
}
}
}
/// <summary>
/// check if two connection line are the same
/// </summary>
/// <param name="conn">connection line control</param>
/// <returns>true:equal, false: not equal</returns>
public bool Equals(SolvableConnection conn)
{
bool isEqual = false;
if (this.streamPoint.Equals(conn.streamPoint) && this.unitOpPoint.Equals(conn.unitOpPoint) &&
this.streamType == conn.StreamType)
{
isEqual = true;
}
return(isEqual);
}
public void UpdateConnections(TeeControl teeCtrl)
{
string name = teeCtrl.Tee.Name;
ArrayList streamOutList = new ArrayList();
int count = teeCtrl.Tee.OutletStreams.Count;
for (int i = 0; i < count; i++)
{
PointOrientation streamOutOrientation = TeeControl.OUTLET_ORIENTATION;
int streamOutIdx = i + 1;
Point streamOutPoint = teeCtrl.GetStreamOutConnectionPoint(i + 1, count);
ConnectionPoint streamOutCp = new ConnectionPoint(streamOutIdx, name, streamOutPoint, streamOutOrientation);
streamOutList.Add(streamOutCp);
}
PointOrientation streamInOrientation = TeeControl.INLET_ORIENTATION;
int streamInIdx = Tee.INLET_INDEX;
Point streamInPoint = teeCtrl.GetStreamInConnectionPoint();
ConnectionPoint streamInCp = new ConnectionPoint(streamInIdx, name, streamInPoint, streamInOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
IEnumerator en = streamOutList.GetEnumerator();
while (en.MoveNext())
{
ConnectionPoint streamOutCp = (ConnectionPoint)en.Current;
if (dc.UnitOpPoint.Equals(streamOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = streamOutCp.Point;
}
}
if (dc.UnitOpPoint.Equals(streamInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = streamInPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
//this.DrawConnections();
}
public void DeleteConnection(SolvableConnection conn)
{
string streamName = conn.StreamPoint.Name;
string uoName = conn.UnitOpPoint.Name;
UnitOpControl unitOpCtrl = this.flowsheet.UnitOpManager.GetUnitOpControl(uoName);
ProcessStreamBaseControl psCtrl = this.flowsheet.StreamManager.GetProcessStreamBaseControl(streamName);
this.DetachStreamFromUnitOp(unitOpCtrl.UnitOperation, psCtrl.ProcessStreamBase);
return;
}
public void UpdateConnections(TwoStreamUnitOpControl twoStrUnitOpCtrl)
{
string name = twoStrUnitOpCtrl.TwoStreamUnitOp.Name;
PointOrientation inOrientation = TwoStreamUnitOpControl.INLET_ORIENTATION;
// do an adjustment if ti is RecycleControl
if (twoStrUnitOpCtrl is RecycleControl)
{
inOrientation = RecycleControl.INLET_ORIENTATION;
}
int inIdx = TwoStreamUnitOperation.INLET_INDEX;
Point inPoint = twoStrUnitOpCtrl.GetStreamInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation outOrientation = TwoStreamUnitOpControl.OUTLET_ORIENTATION;
// do an adjustment if ti is RecycleControl
if (twoStrUnitOpCtrl is RecycleControl)
{
outOrientation = RecycleControl.OUTLET_ORIENTATION;
}
int outIdx = TwoStreamUnitOperation.OUTLET_INDEX;
Point outPoint = twoStrUnitOpCtrl.GetStreamOutConnectionPoint();
ConnectionPoint outCp = new ConnectionPoint(outIdx, name, outPoint, outOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(inCp))
{
//dc.RemoveConnection();
dc.UnitOpPoint.Point = inPoint;
isChanged = true;
}
if (dc.UnitOpPoint.Equals(outCp))
{
//dc.RemoveConnection();
dc.UnitOpPoint.Point = outPoint;
isChanged = true;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void DrawConnections()
{
Graphics g = this.flowsheet.CreateGraphics();
g.Clear(this.flowsheet.BackColor);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection conn = (SolvableConnection)e.Current;
conn.DrawConnection();
}
}
public void UpdateConnections(BagFilterControl bagFilterCtrl)
{
string name = bagFilterCtrl.BagFilter.Name;
PointOrientation inOrientation = BagFilterControl.INLET_ORIENTATION;
int inIdx = BagFilter.INLET_INDEX;
Point inPoint = bagFilterCtrl.GetStreamInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation outOrientation = BagFilterControl.OUTLET_ORIENTATION;
int outIdx = BagFilter.OUTLET_INDEX;
Point outPoint = bagFilterCtrl.GetStreamOutConnectionPoint();
ConnectionPoint outCp = new ConnectionPoint(outIdx, name, outPoint, outOrientation);
PointOrientation particleOutOrientation = BagFilterControl.PARTICLE_OUTLET_ORIENTATION;
int particleOutIdx = BagFilter.PARTICLE_OUTLET_INDEX;
Point particleOutPoint = bagFilterCtrl.GetParticleOutConnectionPoint();
ConnectionPoint particleOutCp = new ConnectionPoint(particleOutIdx, name, particleOutPoint, particleOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(inCp))
{
dc.UnitOpPoint.Point = inPoint;
isChanged = true;
}
if (dc.UnitOpPoint.Equals(outCp))
{
dc.UnitOpPoint.Point = outPoint;
isChanged = true;
}
if (dc.UnitOpPoint.Equals(particleOutCp))
{
dc.UnitOpPoint.Point = particleOutPoint;
isChanged = true;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void UpdateConnections(FlashTankControl flashTankCtrl)
{
string name = flashTankCtrl.FlashTank.Name;
PointOrientation inOrientation = FlashTankControl.INLET_ORIENTATION;
int inIdx = FlashTank.INLET_INDEX;
Point inPoint = flashTankCtrl.GetInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation vaporOutOrientation = FlashTankControl.VAPOR_OUTLET_ORIENTATION;
int vaporOutIdx = FlashTank.VAPOR_OUTLET_INDEX;
Point vaporOutPoint = flashTankCtrl.GetVaporOutConnectionPoint();
ConnectionPoint vaporOutCp = new ConnectionPoint(vaporOutIdx, name, vaporOutPoint, vaporOutOrientation);
PointOrientation liquidOutOrientation = FlashTankControl.LIQUID_OUTLET_ORIENTATION;
int liquidOutIdx = FlashTank.LIQUID_OUTLET_INDEX;
Point liquidOutPoint = flashTankCtrl.GetLiquidOutConnectionPoint();
ConnectionPoint liquidOutCp = new ConnectionPoint(liquidOutIdx, name, liquidOutPoint, liquidOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(inCp))
{
isChanged = true;
dc.UnitOpPoint.Point = inPoint;
}
if (dc.UnitOpPoint.Equals(vaporOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = vaporOutPoint;
}
if (dc.UnitOpPoint.Equals(liquidOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = liquidOutPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
//this.DrawConnections();
}
public void UpdateConnections(CycloneControl cycloneCtrl)
{
string name = cycloneCtrl.Cyclone.Name;
PointOrientation mixtureInOrientation = CycloneControl.MIXTURE_INLET_ORIENTATION;
int mixtureInIdx = Cyclone.GAS_INLET_INDEX;
Point mixtureInPoint = cycloneCtrl.GetGasInConnectionPoint();
ConnectionPoint mixtureInCp = new ConnectionPoint(mixtureInIdx, name, mixtureInPoint, mixtureInOrientation);
PointOrientation fluidOutOrientation = CycloneControl.FLUID_OUTLET_ORIENTATION;
int fluidOutIdx = Cyclone.GAS_OUTLET_INDEX;
Point fluidOutPoint = cycloneCtrl.GetGasOutConnectionPoint();
ConnectionPoint fluidOutCp = new ConnectionPoint(fluidOutIdx, name, fluidOutPoint, fluidOutOrientation);
PointOrientation particleOutOrientation = CycloneControl.PARTICLE_OUTLET_ORIENTATION;
int particleOutIdx = Cyclone.PARTICLE_OUTLET_INDEX;
Point particleOutPoint = cycloneCtrl.GetParticleOutConnectionPoint();
ConnectionPoint particleOutCp = new ConnectionPoint(particleOutIdx, name, particleOutPoint, particleOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(mixtureInCp))
{
dc.UnitOpPoint.Point = mixtureInPoint;
isChanged = true;
}
if (dc.UnitOpPoint.Equals(fluidOutCp))
{
dc.UnitOpPoint.Point = fluidOutPoint;
isChanged = true;
}
if (dc.UnitOpPoint.Equals(particleOutCp))
{
dc.UnitOpPoint.Point = particleOutPoint;
isChanged = true;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void UpdateConnections(BurnerControl burnerCtrl)
{
string name = burnerCtrl.Burner.Name;
PointOrientation airInOrientation = BurnerControl.AIR_INLET_ORIENTATION;
int airInIdx = Burner.AIR_INLET_INDEX;
Point airInPoint = burnerCtrl.GetAirInConnectionPoint();
ConnectionPoint airInCp = new ConnectionPoint(airInIdx, name, airInPoint, airInOrientation);
PointOrientation gasOutOrientation = BurnerControl.FLUE_GAS_OUTLET_ORIENTATION;
int gasOutIdx = Burner.FLUE_GAS_OUTLET_INDEX;
Point gasOutPoint = burnerCtrl.GetFlueGasOutConnectionPoint();
ConnectionPoint gasOutCp = new ConnectionPoint(gasOutIdx, name, gasOutPoint, gasOutOrientation);
PointOrientation fuelInOrientation = BurnerControl.FUEL_INLET_ORIENTATION;
int fuelInIdx = Burner.FUEL_INLET_INDEX;
Point fuelInPoint = burnerCtrl.GetFuelInConnectionPoint();
ConnectionPoint fuelInCp = new ConnectionPoint(fuelInIdx, name, fuelInPoint, fuelInOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(airInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = airInPoint;
}
if (dc.UnitOpPoint.Equals(gasOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = gasOutPoint;
}
if (dc.UnitOpPoint.Equals(fuelInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = fuelInPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void UpdateConnections(WetScrubberControl wetScrubberCtrl)
{
string name = wetScrubberCtrl.WetScrubber.Name;
PointOrientation gasInOrientation = WetScrubberControl.GAS_INLET_ORIENTATION;
int gasInIdx = WetScrubber.GAS_INLET_INDEX;
Point gasInPoint = wetScrubberCtrl.GetGasInConnectionPoint();
ConnectionPoint gasInCp = new ConnectionPoint(gasInIdx, name, gasInPoint, gasInOrientation);
PointOrientation gasOutOrientation = WetScrubberControl.GAS_OUTLET_ORIENTATION;
int gasOutIdx = WetScrubber.GAS_OUTLET_INDEX;
Point gasOutPoint = wetScrubberCtrl.GetGasOutConnectionPoint();
ConnectionPoint gasOutCp = new ConnectionPoint(gasOutIdx, name, gasOutPoint, gasOutOrientation);
PointOrientation liquidInOrientation = WetScrubberControl.LIQUID_INLET_ORIENTATION;
int liquidInIdx = WetScrubber.LIQUID_INLET_INDEX;
Point liquidInPoint = wetScrubberCtrl.GetLiquidInConnectionPoint();
ConnectionPoint liquidInCp = new ConnectionPoint(liquidInIdx, name, liquidInPoint, liquidInOrientation);
PointOrientation liquidOutOrientation = WetScrubberControl.LIQUID_OUTLET_ORIENTATION;
int liquidOutIdx = WetScrubber.LIQUID_OUTLET_INDEX;
Point liquidOutPoint = wetScrubberCtrl.GetLiquidOutConnectionPoint();
ConnectionPoint liquidOutCp = new ConnectionPoint(liquidOutIdx, name, liquidOutPoint, liquidOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.UnitOpPoint.Equals(gasInCp))
{
dc.UnitOpPoint.Point = gasInPoint;
}
if (dc.UnitOpPoint.Equals(gasOutCp))
{
dc.UnitOpPoint.Point = gasOutPoint;
}
if (dc.UnitOpPoint.Equals(liquidInCp))
{
dc.UnitOpPoint.Point = liquidInPoint;
}
if (dc.UnitOpPoint.Equals(liquidOutCp))
{
dc.UnitOpPoint.Point = liquidOutPoint;
}
}
this.DrawConnections();
}
public void UpdateConnections(HeatExchangerControl heatExchangerCtrl)
{
string name = heatExchangerCtrl.HeatExchanger.Name;
PointOrientation coldInOrientation = HeatExchangerControl.COLD_INLET_ORIENTATION;
int coldInIdx = HeatExchanger.COLD_SIDE_INLET_INDEX;
Point coldInPoint = heatExchangerCtrl.GetColdInConnectionPoint();
ConnectionPoint coldInCp = new ConnectionPoint(coldInIdx, name, coldInPoint, coldInOrientation);
PointOrientation coldOutOrientation = HeatExchangerControl.COLD_OUTLET_ORIENTATION;
int coldOutIdx = HeatExchanger.COLD_SIDE_OUTLET_INDEX;
Point coldOutPoint = heatExchangerCtrl.GetColdOutConnectionPoint();
ConnectionPoint coldOutCp = new ConnectionPoint(coldOutIdx, name, coldOutPoint, coldOutOrientation);
PointOrientation hotInOrientation = HeatExchangerControl.HOT_INLET_ORIENTATION;
int hotInIdx = HeatExchanger.HOT_SIDE_INLET_INDEX;
Point hotInPoint = heatExchangerCtrl.GetHotInConnectionPoint();
ConnectionPoint hotInCp = new ConnectionPoint(hotInIdx, name, hotInPoint, hotInOrientation);
PointOrientation hotOutOrientation = HeatExchangerControl.HOT_OUTLET_ORIENTATION;
int hotOutIdx = HeatExchanger.HOT_SIDE_OUTLET_INDEX;
Point hotOutPoint = heatExchangerCtrl.GetHotOutConnectionPoint();
ConnectionPoint hotOutCp = new ConnectionPoint(hotOutIdx, name, hotOutPoint, hotOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.UnitOpPoint.Equals(coldInCp))
{
dc.UnitOpPoint.Point = coldInPoint;
}
if (dc.UnitOpPoint.Equals(coldOutCp))
{
dc.UnitOpPoint.Point = coldOutPoint;
}
if (dc.UnitOpPoint.Equals(hotInCp))
{
dc.UnitOpPoint.Point = hotInPoint;
}
if (dc.UnitOpPoint.Equals(hotOutCp))
{
dc.UnitOpPoint.Point = hotOutPoint;
}
}
this.DrawConnections();
}
public void UpdateConnections(DryerControl dryerCtrl)
{
string name = dryerCtrl.Dryer.Name;
PointOrientation gasInOrientation = DryerControl.GAS_INLET_ORIENTATION;
int gasInIdx = Dryer.GAS_INLET_INDEX;
Point gasInPoint = dryerCtrl.GetGasInConnectionPoint();
ConnectionPoint gasInCp = new ConnectionPoint(gasInIdx, name, gasInPoint, gasInOrientation);
PointOrientation gasOutOrientation = DryerControl.GAS_OUTLET_ORIENTATION;
int gasOutIdx = Dryer.GAS_OUTLET_INDEX;
Point gasOutPoint = dryerCtrl.GetGasOutConnectionPoint();
ConnectionPoint gasOutCp = new ConnectionPoint(gasOutIdx, name, gasOutPoint, gasOutOrientation);
PointOrientation matInOrientation = DryerControl.MATERIAL_INLET_ORIENTATION;
int matInIdx = Dryer.MATERIAL_INLET_INDEX;
Point matInPoint = dryerCtrl.GetMaterialInConnectionPoint();
ConnectionPoint matInCp = new ConnectionPoint(matInIdx, name, matInPoint, matInOrientation);
PointOrientation matOutOrientation = DryerControl.MATERIAL_OUTLET_ORIENTATION;
int matOutIdx = Dryer.MATERIAL_OUTLET_INDEX;
Point matOutPoint = dryerCtrl.GetMaterialOutConnectionPoint();
ConnectionPoint matOutCp = new ConnectionPoint(matOutIdx, name, matOutPoint, matOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.UnitOpPoint.Equals(gasInCp))
{
dc.UnitOpPoint.Point = gasInPoint;
}
if (dc.UnitOpPoint.Equals(gasOutCp))
{
dc.UnitOpPoint.Point = gasOutPoint;
}
if (dc.UnitOpPoint.Equals(matInCp))
{
dc.UnitOpPoint.Point = matInPoint;
}
if (dc.UnitOpPoint.Equals(matOutCp))
{
dc.UnitOpPoint.Point = matOutPoint;
}
}
this.DrawConnections();
}
public void RemoveConnections(string name, int whom)
{
if (this.Connections.Count > 0)
{
ArrayList toDeleteConnections = new ArrayList();
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
switch (whom)
{
case STREAM:
if (dc.StreamPoint.Name.Equals(name))
{
toDeleteConnections.Add(dc);
}
break;
case UNIT_OP:
if (dc.UnitOpPoint.Name.Equals(name))
{
toDeleteConnections.Add(dc);
}
break;
case ALL:
if (dc.StreamPoint.Name.Equals(name) || dc.UnitOpPoint.Name.Equals(name))
{
toDeleteConnections.Add(dc);
}
break;
default:
break;
}
}
if (toDeleteConnections.Count > 0)
{
IEnumerator e2 = toDeleteConnections.GetEnumerator();
while (e2.MoveNext())
{
SolvableConnection conn = (SolvableConnection)e2.Current;
this.Connections.Remove(conn);
}
this.DrawConnections();
}
}
}
//private static Flowsheet UnpersistFlowsheet1_01(NewProcessSettings newProcessSettings, ApplicationPreferences appPrefs, ArrayList persistedItems, string flowsheetName) {
private static Flowsheet UnpersistFlowsheet1_01(ArrayList persistedItems, string flowsheetName, ApplicationPreferences appPrefs)
{
Flowsheet flowsheet = null;
foreach (object obj in persistedItems)
{
if (obj is EvaporationAndDryingSystem)
{
EvaporationAndDryingSystem persisted = (EvaporationAndDryingSystem)obj;
persisted.SetSystemFileName(flowsheetName); // call this before SetObjectData()
persisted.SetObjectData();
//flowsheet = new Flowsheet(newProcessSettings, appPrefs, persisted);
flowsheet = new Flowsheet(persisted, appPrefs);
}
else if (obj is SolvableControl)
{
SolvableControl persistedCtrl = (SolvableControl)obj;
persistedCtrl.Flowsheet = flowsheet;
persistedCtrl.SetObjectData();
//string solvableName = (string)persistedCtrl.NameControl.Text;
//Solvable solvable = flowsheet.EvaporationAndDryingSystem.GetSolvable(solvableName);
//persistedCtrl.Solvable = solvable;
flowsheet.Controls.Add(persistedCtrl);
}
else if (obj is SolvableConnection)
{
SolvableConnection persistedDc = (SolvableConnection)obj;
persistedDc.Flowsheet = flowsheet;
persistedDc.SetObjectData();
persistedDc.UpdateConnection();
flowsheet.ConnectionManager.AddConnection(persistedDc);
}
else if (obj is FlowsheetPreferences)
{
FlowsheetPreferences flowsheetPrefs = obj as FlowsheetPreferences;
flowsheetPrefs.SetObjectData();
flowsheet.BackColor = flowsheetPrefs.BackColor;
}
else if (obj is ProsimoUI.CustomEditor.CustomEditor)
{
ProsimoUI.CustomEditor.CustomEditor persistedEditor = (ProsimoUI.CustomEditor.CustomEditor)obj;
persistedEditor.Flowsheet = flowsheet;
persistedEditor.SetObjectData();
}
}
return(flowsheet);
}
public void UpdateConnections(EjectorControl ejectorCtrl)
{
string name = ejectorCtrl.Ejector.Name;
PointOrientation motiveInOrientation = EjectorControl.MOTIVE_INLET_ORIENTATION;
int motiveInIdx = Ejector.MOTIVE_INLET_INDEX;
Point motiveInPoint = ejectorCtrl.GetMotiveInConnectionPoint();
ConnectionPoint motiveInCp = new ConnectionPoint(motiveInIdx, name, motiveInPoint, motiveInOrientation);
PointOrientation suctionInOrientation = EjectorControl.SUCTION_INLET_ORIENTATION;
int suctionInIdx = Ejector.SUCTION_INLET_INDEX;
Point suctionInPoint = ejectorCtrl.GetSuctionInConnectionPoint();
ConnectionPoint suctionInCp = new ConnectionPoint(suctionInIdx, name, suctionInPoint, suctionInOrientation);
PointOrientation dischargeOutOrientation = EjectorControl.DISCHARGE_OUTLET_ORIENTATION;
int dischargeOutIdx = Ejector.DISCHARGE_OUTLET_INDEX;
Point dischargeOutPoint = ejectorCtrl.GetDischargeOutConnectionPoint();
ConnectionPoint dischargeOutCp = new ConnectionPoint(dischargeOutIdx, name, dischargeOutPoint, dischargeOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.UnitOpPoint.Equals(motiveInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = motiveInPoint;
}
if (dc.UnitOpPoint.Equals(suctionInCp))
{
isChanged = true;
dc.UnitOpPoint.Point = suctionInPoint;
}
if (dc.UnitOpPoint.Equals(dischargeOutCp))
{
isChanged = true;
dc.UnitOpPoint.Point = dischargeOutPoint;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
private void ChangeCursorOverConnection(Point p)
{
this.Cursor = Cursors.No;
if (this.connectionManager.Connections.Count > 0)
{
IEnumerator e = this.connectionManager.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection conn = (SolvableConnection)e.Current;
if (conn.HitTest(p))
{
this.Cursor = Cursors.Cross;
break;
}
}
}
}
public void RemoveConnections(string strName, string uoName)
{
if (this.Connections.Count > 0)
{
ArrayList toDeleteConnections = new ArrayList();
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.StreamPoint.Name.Equals(strName) && dc.UnitOpPoint.Name.Equals(uoName))
{
this.flowsheet.Controls.Remove(dc);
this.Connections.Remove(dc);
}
}
}
}
public void UpdateConnections(MixerControl mixerCtrl)
{
string name = mixerCtrl.Mixer.Name;
ArrayList streamInList = new ArrayList();
int count = mixerCtrl.Mixer.InletStreams.Count;
for (int i = 0; i < count; i++)
{
PointOrientation streamInOrientation = MixerControl.INLET_ORIENTATION;
int streamInIdx = i + 1;
Point streamInPoint = mixerCtrl.GetStreamInConnectionPoint(i + 1, count);
ConnectionPoint streamInCp = new ConnectionPoint(streamInIdx, name, streamInPoint, streamInOrientation);
streamInList.Add(streamInCp);
}
PointOrientation streamOutOrientation = MixerControl.OUTLET_ORIENTATION;
int streamOutIdx = Mixer.OUTLET_INDEX;
Point streamOutPoint = mixerCtrl.GetStreamOutConnectionPoint();
ConnectionPoint streamOutCp = new ConnectionPoint(streamOutIdx, name, streamOutPoint, streamOutOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
IEnumerator en = streamInList.GetEnumerator();
while (en.MoveNext())
{
ConnectionPoint streamInCp = (ConnectionPoint)en.Current;
if (dc.UnitOpPoint.Equals(streamInCp))
{
dc.UnitOpPoint.Point = streamInCp.Point;
}
}
if (dc.UnitOpPoint.Equals(streamOutCp))
{
dc.UnitOpPoint.Point = streamOutPoint;
}
}
this.DrawConnections();
}
public void UpdateConnections(TwoStreamUnitOpControl twoStrUnitOpCtrl)
{
string name = twoStrUnitOpCtrl.TwoStreamUnitOp.Name;
PointOrientation inOrientation = TwoStreamUnitOpControl.INLET_ORIENTATION;
// do an adjustment if ti is RecycleControl
if (twoStrUnitOpCtrl is RecycleControl)
{
inOrientation = RecycleControl.INLET_ORIENTATION;
}
int inIdx = TwoStreamUnitOperation.INLET_INDEX;
Point inPoint = twoStrUnitOpCtrl.GetStreamInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation outOrientation = TwoStreamUnitOpControl.OUTLET_ORIENTATION;
// do an adjustment if ti is RecycleControl
if (twoStrUnitOpCtrl is RecycleControl)
{
outOrientation = RecycleControl.OUTLET_ORIENTATION;
}
int outIdx = TwoStreamUnitOperation.OUTLET_INDEX;
Point outPoint = twoStrUnitOpCtrl.GetStreamOutConnectionPoint();
ConnectionPoint outCp = new ConnectionPoint(outIdx, name, outPoint, outOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.UnitOpPoint.Equals(inCp))
{
dc.UnitOpPoint.Point = inPoint;
}
if (dc.UnitOpPoint.Equals(outCp))
{
dc.UnitOpPoint.Point = outPoint;
}
}
this.DrawConnections();
}
public void UpdateConnections(ProcessStreamBaseControl streamCtrl)
{
string name = streamCtrl.ProcessStreamBase.Name;
PointOrientation inOrientation = streamCtrl.InOrientation;
int inIdx = ProcessStreamBaseControl.IN_INDEX;
Point inPoint = streamCtrl.GetInConnectionPoint();
ConnectionPoint inCp = new ConnectionPoint(inIdx, name, inPoint, inOrientation);
PointOrientation outOrientation = streamCtrl.OutOrientation;
int outIdx = ProcessStreamBaseControl.OUT_INDEX;
Point outPoint = streamCtrl.GetOutConnectionPoint();
ConnectionPoint outCp = new ConnectionPoint(outIdx, name, outPoint, outOrientation);
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
Boolean isChanged = false;
if (dc.StreamPoint.Equals(inCp))
{
dc.StreamPoint.Orientation = inOrientation;
dc.StreamPoint.Point = inPoint;
isChanged = true;
}
if (dc.StreamPoint.Equals(outCp))
{
dc.StreamPoint.Orientation = outOrientation;
dc.StreamPoint.Point = outPoint;
isChanged = true;
}
if (isChanged)
{
this.flowsheet.Controls.Remove(dc);
dc.UpdateConnection();
this.flowsheet.Controls.Add(dc);
isChanged = false;
}
}
}
public void SetOwner(string oldName, string newName)
{
if (this.Connections.Count > 0)
{
IEnumerator e = this.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
if (dc.StreamPoint.Name.Equals(oldName))
{
dc.StreamPoint.Name = newName;
}
if (dc.UnitOpPoint.Name.Equals(oldName))
{
dc.UnitOpPoint.Name = newName;
}
}
}
}
public void DeleteConnection(Point p)
{
if (this.Connections.Count > 0)
{
IEnumerator e4 = this.Connections.GetEnumerator();
while (e4.MoveNext())
{
SolvableConnection conn = (SolvableConnection)e4.Current;
if (conn.HitTest(p))
{
string streamName = conn.StreamPoint.Name;
string uoName = conn.UnitOpPoint.Name;
UnitOpControl unitOpCtrl = this.flowsheet.UnitOpManager.GetUnitOpControl(uoName);
ProcessStreamBaseControl psCtrl = this.flowsheet.StreamManager.GetProcessStreamBaseControl(streamName);
this.DetachStreamFromUnitOp(unitOpCtrl.UnitOperation, psCtrl.ProcessStreamBase);
break;
}
}
}
}
private Flowsheet SetFlowsheetContent(NewProcessSettings newProcessSettings, ApplicationPreferences appPrefs, ArrayList items, string flowsheetName)
{
Flowsheet flowsheet = null;
IEnumerator e = items.GetEnumerator();
while (e.MoveNext())
{
object obj = e.Current;
if (obj is EvaporationAndDryingSystem)
{
EvaporationAndDryingSystem persisted = (EvaporationAndDryingSystem)obj;
persisted.SetSystemFileName(flowsheetName); // call this before SetObjectData()
persisted.SetObjectData();
flowsheet = new Flowsheet(newProcessSettings, appPrefs, persisted);
}
else if (obj is GasStreamControl)
{
GasStreamControl persistedCtrl = (GasStreamControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
DryingGasStream stream = flowsheet.EvaporationAndDryingSystem.GetGasStream(solvableName);
GasStreamControl newCtrl = new GasStreamControl(flowsheet, new Point(0, 0), stream);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is MaterialStreamControl)
{
MaterialStreamControl persistedCtrl = (MaterialStreamControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
DryingMaterialStream stream = flowsheet.EvaporationAndDryingSystem.GetMaterialStream(solvableName);
MaterialStreamControl newCtrl = new MaterialStreamControl(flowsheet, new Point(0, 0), stream);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is DryerControl)
{
DryerControl persistedCtrl = (DryerControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Dryer uo = flowsheet.EvaporationAndDryingSystem.GetDryer(solvableName);
DryerControl newCtrl = new DryerControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is HeatExchangerControl)
{
HeatExchangerControl persistedCtrl = (HeatExchangerControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
HeatExchanger uo = flowsheet.EvaporationAndDryingSystem.GetHeatExchanger(solvableName);
HeatExchangerControl newCtrl = new HeatExchangerControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is CycloneControl)
{
CycloneControl persistedCtrl = (CycloneControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Cyclone uo = flowsheet.EvaporationAndDryingSystem.GetCyclone(solvableName);
CycloneControl newCtrl = new CycloneControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is EjectorControl)
{
EjectorControl persistedCtrl = (EjectorControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Ejector uo = flowsheet.EvaporationAndDryingSystem.GetEjector(solvableName);
EjectorControl newCtrl = new EjectorControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is WetScrubberControl)
{
WetScrubberControl persistedCtrl = (WetScrubberControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
WetScrubber uo = flowsheet.EvaporationAndDryingSystem.GetWetScrubber(solvableName);
WetScrubberControl newCtrl = new WetScrubberControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is ScrubberCondenserControl)
{
ScrubberCondenserControl persistedCtrl = (ScrubberCondenserControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
ScrubberCondenser uo = flowsheet.EvaporationAndDryingSystem.GetScrubberCondenser(solvableName);
ScrubberCondenserControl newCtrl = new ScrubberCondenserControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is MixerControl)
{
MixerControl persistedCtrl = (MixerControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Mixer uo = flowsheet.EvaporationAndDryingSystem.GetMixer(solvableName);
MixerControl newCtrl = new MixerControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is TeeControl)
{
TeeControl persistedCtrl = (TeeControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Tee uo = flowsheet.EvaporationAndDryingSystem.GetTee(solvableName);
TeeControl newCtrl = new TeeControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is FlashTankControl)
{
FlashTankControl persistedCtrl = (FlashTankControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
FlashTank uo = flowsheet.EvaporationAndDryingSystem.GetFlashTank(solvableName);
FlashTankControl newCtrl = new FlashTankControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is FanControl)
{
FanControl persistedCtrl = (FanControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Fan uo = flowsheet.EvaporationAndDryingSystem.GetFan(solvableName);
FanControl newCtrl = new FanControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is ValveControl)
{
ValveControl persistedCtrl = (ValveControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Valve uo = flowsheet.EvaporationAndDryingSystem.GetValve(solvableName);
ValveControl newCtrl = new ValveControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is BagFilterControl)
{
BagFilterControl persistedCtrl = (BagFilterControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
BagFilter uo = flowsheet.EvaporationAndDryingSystem.GetBagFilter(solvableName);
BagFilterControl newCtrl = new BagFilterControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is AirFilterControl)
{
AirFilterControl persistedCtrl = (AirFilterControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
AirFilter uo = flowsheet.EvaporationAndDryingSystem.GetAirFilter(solvableName);
AirFilterControl newCtrl = new AirFilterControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is CompressorControl)
{
CompressorControl persistedCtrl = (CompressorControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Compressor uo = flowsheet.EvaporationAndDryingSystem.GetCompressor(solvableName);
CompressorControl newCtrl = new CompressorControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is HeaterControl)
{
HeaterControl persistedCtrl = (HeaterControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Heater uo = flowsheet.EvaporationAndDryingSystem.GetHeater(solvableName);
HeaterControl newCtrl = new HeaterControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is CoolerControl)
{
CoolerControl persistedCtrl = (CoolerControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Cooler uo = flowsheet.EvaporationAndDryingSystem.GetCooler(solvableName);
CoolerControl newCtrl = new CoolerControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is ElectrostaticPrecipitatorControl)
{
ElectrostaticPrecipitatorControl persistedCtrl = (ElectrostaticPrecipitatorControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
ElectrostaticPrecipitator uo = flowsheet.EvaporationAndDryingSystem.GetElectrostaticPrecipitator(solvableName);
ElectrostaticPrecipitatorControl newCtrl = new ElectrostaticPrecipitatorControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is PumpControl)
{
PumpControl persistedCtrl = (PumpControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Pump uo = flowsheet.EvaporationAndDryingSystem.GetPump(solvableName);
PumpControl newCtrl = new PumpControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is RecycleControl)
{
RecycleControl persistedCtrl = (RecycleControl)obj;
string solvableName = (string)persistedCtrl.SerializationInfo.GetValue("SolvableName", typeof(string));
Recycle uo = flowsheet.EvaporationAndDryingSystem.GetRecycle(solvableName);
RecycleControl newCtrl = new RecycleControl(flowsheet, new Point(0, 0), uo);
newCtrl.SetObjectData(persistedCtrl.SerializationInfo, persistedCtrl.StreamingContext);
flowsheet.Controls.Add(newCtrl);
}
else if (obj is SolvableConnection)
{
SolvableConnection persistedDc = (SolvableConnection)obj;
SolvableConnection dc = new SolvableConnection(flowsheet);
dc.SetObjectData(persistedDc.SerializationInfo, persistedDc.StreamingContext);
flowsheet.ConnectionManager.Connections.Add(dc);
}
else if (obj is FlowsheetPreferences)
{
FlowsheetPreferences flowsheetPrefs = obj as FlowsheetPreferences;
flowsheetPrefs.SetObjectData(flowsheetPrefs.SerializationInfo, flowsheetPrefs.StreamingContext);
flowsheet.BackColor = flowsheetPrefs.BackColor;
}
else if (obj is ProsimoUI.CustomEditor.CustomEditor)
{
ProsimoUI.CustomEditor.CustomEditor persistedEditor = (ProsimoUI.CustomEditor.CustomEditor)obj;
flowsheet.CustomEditor.SetObjectData(persistedEditor.SerializationInfo, persistedEditor.StreamingContext);
}
}
if (this.CheckFlowsheetVersion(items, flowsheet))
{
flowsheet.IsDirty = false;
}
else
{
flowsheet = null;
}
return(flowsheet);
}
public void DrawConnection(SolvableConnection conn)
{
this.flowsheet.Controls.Add(conn);
}
private ArrayList GetFlowsheetContent(Flowsheet flowsheet)
{
ArrayList toSerializeItems = new ArrayList();
toSerializeItems.Add(flowsheet.EvaporationAndDryingSystem);
// get all the flowsheet element controls
IEnumerator e = flowsheet.Controls.GetEnumerator();
while (e.MoveNext())
{
object obj = e.Current;
if (obj is GasStreamControl)
{
GasStreamControl ctrl = (GasStreamControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is MaterialStreamControl)
{
MaterialStreamControl ctrl = (MaterialStreamControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is DryerControl)
{
DryerControl ctrl = (DryerControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is HeatExchangerControl)
{
HeatExchangerControl ctrl = (HeatExchangerControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is CycloneControl)
{
CycloneControl ctrl = (CycloneControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is EjectorControl)
{
EjectorControl ctrl = (EjectorControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is WetScrubberControl)
{
WetScrubberControl ctrl = (WetScrubberControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is ScrubberCondenserControl)
{
ScrubberCondenserControl ctrl = (ScrubberCondenserControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is MixerControl)
{
MixerControl ctrl = (MixerControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is TeeControl)
{
TeeControl ctrl = (TeeControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is FlashTankControl)
{
FlashTankControl ctrl = (FlashTankControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is FanControl)
{
FanControl ctrl = (FanControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is ValveControl)
{
ValveControl ctrl = (ValveControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is BagFilterControl)
{
BagFilterControl ctrl = (BagFilterControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is AirFilterControl)
{
AirFilterControl ctrl = (AirFilterControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is CompressorControl)
{
CompressorControl ctrl = (CompressorControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is HeaterControl)
{
HeaterControl ctrl = (HeaterControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is CoolerControl)
{
CoolerControl ctrl = (CoolerControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is ElectrostaticPrecipitatorControl)
{
ElectrostaticPrecipitatorControl ctrl = (ElectrostaticPrecipitatorControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is PumpControl)
{
PumpControl ctrl = (PumpControl)obj;
toSerializeItems.Add(ctrl);
}
else if (obj is RecycleControl)
{
RecycleControl ctrl = (RecycleControl)obj;
toSerializeItems.Add(ctrl);
}
}
// get all the connections
e = flowsheet.ConnectionManager.Connections.GetEnumerator();
while (e.MoveNext())
{
SolvableConnection dc = (SolvableConnection)e.Current;
toSerializeItems.Add(dc);
}
// get the flowsheet preferences
FlowsheetPreferences flowsheetPrefs = new FlowsheetPreferences(flowsheet);
toSerializeItems.Add(flowsheetPrefs);
// get the custom editor (we persist only the ID of the variables)
toSerializeItems.Add(flowsheet.CustomEditor);
// get the flowsheet version
toSerializeItems.Add(flowsheet.Version);
return(toSerializeItems);
}