private const double refractory = 1; // in seconds
internal IISZapper(int phaseWidth, double amplitude, int channel, int numPulses, double rate,
Task stimDigitalTask, Task stimAnalogTask, DigitalSingleChannelWriter stimDigitalWriter,
AnalogMultiChannelWriter stimAnalogWriter, double deviceRefreshRate, NeuroRighter sender)
{
const int prePadding = 100;
const int postPadding = 100;
const double offsetVoltage = 0.0;
const int interPhaseLength = 0;
this.stimDigitalTask = stimDigitalTask;
this.stimDigitalWriter = stimDigitalWriter;
this.stimAnalogTask = stimAnalogTask;
this.stimAnalogWriter = stimAnalogWriter;
this.channel = channel - 1;
sp = new StimPulse(phaseWidth, phaseWidth, amplitude, -amplitude, channel,
numPulses, rate, offsetVoltage, interPhaseLength, prePadding, postPadding, true);
stimAnalogTask.Timing.SamplesPerChannel = numPulses * sp.analogPulse.GetLength(1);
stimDigitalTask.Timing.SamplesPerChannel = numPulses * sp.digitalData.GetLength(0);
totalNumReadsTraining = (int)(numSecondsTraining / deviceRefreshRate);
totalNumReadsRefractory = (int)(refractory / deviceRefreshRate);
numReadsRefractory = totalNumReadsRefractory;
}
internal IISZapper(int phaseWidth, double amplitude, int channel, int numPulses, double rate,
Task stimDigitalTask, Task stimAnalogTask, DigitalSingleChannelWriter stimDigitalWriter,
AnalogMultiChannelWriter stimAnalogWriter, double deviceRefreshRate, NeuroRighter sender)
{
const int prePadding = 100;
const int postPadding = 100;
const double offsetVoltage = 0.0;
const int interPhaseLength = 0;
this.stimDigitalTask = stimDigitalTask;
this.stimDigitalWriter = stimDigitalWriter;
this.stimAnalogTask = stimAnalogTask;
this.stimAnalogWriter = stimAnalogWriter;
this.channel = channel - 1;
sp = new StimPulse(phaseWidth, phaseWidth, amplitude, -amplitude, channel,
numPulses, rate, offsetVoltage, interPhaseLength, prePadding, postPadding, true);
stimAnalogTask.Timing.SamplesPerChannel = numPulses * sp.analogPulse.GetLength(1);
stimDigitalTask.Timing.SamplesPerChannel = numPulses * sp.digitalData.GetLength(0);
totalNumReadsTraining = (int)(numSecondsTraining / deviceRefreshRate);
totalNumReadsRefractory = (int)(refractory / deviceRefreshRate);
numReadsRefractory = totalNumReadsRefractory;
}
internal void populate(Boolean addTrigger)
{
//Compute total length of pulse, in samples
int totalLength = 0;
for (int c = 0; c < interpulseIntervals.Count; ++c)
{
totalLength += interpulseIntervals[c]; //All interpulse intervals
}
totalLength += prePadding[0]; //The 'off' time of first pulse
totalLength += postPadding[channel.Count - 1]; //'off' time of last pulse
totalLength += width1[channel.Count - 1] + width2[channel.Count - 1] +
interphaseLength[channel.Count - 1]; //and length of last pulse
if (addTrigger) //If trigger is being added to end, add that length too
{
totalLength += 1 + StimPulse.STIM_SAMPLING_FREQ * WATCH_TIME / 1000;
}
//This experiment REQUIRES triggers, therefore MUST use 32-bit ports!!!
int numRows = 4;
if (Properties.Settings.Default.StimPortBandwidth != 32)
{
System.Windows.Forms.MessageBox.Show("Must use 32-bit port for this experiment, since triggers must be used.", "Port-size error");
return;
}
//Set aside space for analog pulse
analogPulse = new double[numRows, totalLength]; //Only make one pulse of train, the padding zeros will ensure proper rate when sampling is regenerative
digitalData = new UInt32[totalLength + 2 * (StimPulse.NUM_SAMPLES_BLANKING + 2)];
//Bookkeeping variable for constructing pulse
int offset = 0;
for (int c = 0; c < channel.Count; ++c) //for each pulse
{
//Setup voltage waveform, pos. then neg.
int size = Convert.ToInt32((((double)width1[c] + (double)width2[c]) / 1000000.0) * StimPulse.STIM_SAMPLING_FREQ + prePadding[c] + postPadding[c] + interphaseLength[c]); //Num. pts. in pulse
//What was that doing? Convert width to seconds, divide by sample duration, mult. by
//two since the pulse is biphasic, add padding to both sides
#region AnalogPulseCreation
//v1 and v2 encode channel number
double v1 = Math.Ceiling((double)channel[c] / 8.0);
double v2 = (double)((channel[c] - 1) % 8) + 1.0;
for (int j = 0; j < prePadding[c]; ++j)
{
analogPulse[2, j + offset] = offsetVoltage[c];
}
for (int j = prePadding[c]; j < prePadding[c] + Convert.ToInt32(((double)width1[c] / 1000000.0) * StimPulse.STIM_SAMPLING_FREQ); ++j)
{
analogPulse[2, j + offset] = amp1[c] + offsetVoltage[c];
}
for (int j = prePadding[c] + Convert.ToInt32(((double)width1[c] / 1000000.0) * StimPulse.STIM_SAMPLING_FREQ); j < prePadding[c] + Convert.ToInt32(((double)width1[c] / 1000000.0) * StimPulse.STIM_SAMPLING_FREQ) + interphaseLength[c]; ++j)
{
analogPulse[2, j + offset] = offsetVoltage[c];
}
for (int j = prePadding[c] + Convert.ToInt32(((double)width1[c] / 1000000.0) * StimPulse.STIM_SAMPLING_FREQ) + interphaseLength[c]; j < size - postPadding[c]; ++j)
{
analogPulse[2, j + offset] = amp2[c] + offsetVoltage[c];
}
for (int j = size - postPadding[c]; j < size; ++j)
{
analogPulse[2, j + offset] = offsetVoltage[c];
}
for (int j = prePadding[c]; j < 20 + prePadding[c]; ++j)
{
analogPulse[3, j + offset] = v1;
}
for (int j = 20 + prePadding[c]; j < 40 + prePadding[c]; ++j)
{
analogPulse[3, j + offset] = v2;
}
for (int j = 40 + prePadding[c]; j < 60 + prePadding[c]; ++j)
{
analogPulse[3, j + offset] = amp1[c];
}
for (int j = 60 + prePadding[c]; j < 80 + prePadding[c]; ++j)
{
analogPulse[3, j + offset] = (double)(width1[c]) / 100.0;
}
//Add trigger, if applicable
if (addTrigger && c == channel.Count - 1)
{
for (int j = size; j < StimPulse.STIM_SAMPLING_FREQ * WATCH_TIME / 1000; ++j)
{
analogPulse[0, j + offset] = 4.0; //4 Volts, TTL-compatible
}
analogPulse[0, analogPulse.GetLength(1) - 1] = 0.0;
}
#endregion
#region DigitalPulseCreation
//Get data bits lined up to control MUXes
UInt32 temp;
if (c == 0)
{
temp = StimPulse.channel2MUX((double)channel[c]);
}
else
{
temp = StimPulse.channel2MUX((double)channel[c], true, false); //select channel without start trigger for AO
}
UInt32 temp_noEn = StimPulse.channel2MUX_noEN((double)channel[c]);
UInt32 temp_blankOnly = Convert.ToUInt32(Math.Pow(2, (Properties.Settings.Default.StimPortBandwidth == 32 ? BLANKING_BIT_32bitPort : BLANKING_BIT_8bitPort)));
for (int j = 1; j <= StimPulse.NUM_SAMPLES_BLANKING; ++j)
{
digitalData[j + offset] = temp_blankOnly;
}
digitalData[StimPulse.NUM_SAMPLES_BLANKING + 1 + offset] = temp_noEn;
for (int j = StimPulse.NUM_SAMPLES_BLANKING + 2; j < size + StimPulse.NUM_SAMPLES_BLANKING + 2; ++j)
{
digitalData[j + offset] = temp;
}
digitalData[size + StimPulse.NUM_SAMPLES_BLANKING + 2 + offset] = temp_noEn;
for (int j = size + StimPulse.NUM_SAMPLES_BLANKING + 3; j < size + 2 * StimPulse.NUM_SAMPLES_BLANKING + 3; ++j)
{
digitalData[j + offset] = temp_blankOnly;
}
#endregion
//Update offset to account for interphase length
if (c < interpulseIntervals.Count)
{
offset += interpulseIntervals[c]; //this has one less member than all the stimpulses
}
//NB: this form of offset changing assumes homogeneous prepaddings
}
}
private void bw_stim_DoWork(object sender, DoWorkEventArgs e)
{
//Get pulse arguments
double[] stim_params = (double[])e.Argument;
//Select between uni- and biphasic pulses
int phase2Width = (int)stim_params[0];
if (radioButton_OnDemandUniphasic.Checked)
phase2Width = 0;
if (stim_params[3] * 1000 / stim_params[4] < 500)
{
//Create pulse
StimPulse sp = new StimPulse((int)stim_params[0], phase2Width, stim_params[1], -stim_params[1],
(int)stim_params[2], (int)stim_params[3], (int)stim_params[4], (double)stim_params[5], (int)stim_params[6], 10, 10, true);
if (stim_params[3] == 1)
{
stimPulseTask.Timing.SamplesPerChannel = sp.analogPulse.GetLength(1);
stimDigitalTask.Timing.SamplesPerChannel = sp.digitalData.Length;
}
//Write
stimPulseWriter.WriteMultiSample(true, sp.analogPulse);
if (Properties.Settings.Default.StimPortBandwidth == 32)
stimDigitalWriter.WriteMultiSamplePort(true, sp.digitalData);
else if (Properties.Settings.Default.StimPortBandwidth == 8)
stimDigitalWriter.WriteMultiSamplePort(true, StimPulse.convertTo8Bit(sp.digitalData));
DateTime stimStartTime = DateTime.Now;
stimStopTime = stimStartTime.AddMilliseconds(((double)stim_params[3] * 1000.0) / (double)stim_params[4]);
//timer.Enabled = true;
stimPulseTask.WaitUntilDone();
stimDigitalTask.WaitUntilDone();
stimPulseTask.Stop();
stimDigitalTask.Stop();
}
else
{
//Make a single stim pulse, but with the correct number of zeros to insure proper rate
//when task is regenerative
StimPulse sp = new StimPulse((int)stim_params[0], phase2Width, stim_params[1], -stim_params[1], (int)stim_params[2], 1, (int)stim_params[4], (double)stim_params[5], (int)stim_params[6], 10, 10, true);
if (stim_params[3] == 1)
{
stimPulseTask.Timing.SamplesPerChannel = sp.analogPulse.GetLength(1);
stimDigitalTask.Timing.SamplesPerChannel = sp.digitalData.Length;
}
stimPulseWriter.WriteMultiSample(true, sp.analogPulse);
//stimDigitalWriter.WriteWaveform(true, sp.digitalPulse);
if (Properties.Settings.Default.StimPortBandwidth == 32)
stimDigitalWriter.WriteMultiSamplePort(true, sp.digitalData);
else if (Properties.Settings.Default.StimPortBandwidth == 8)
stimDigitalWriter.WriteMultiSamplePort(true, StimPulse.convertTo8Bit(sp.digitalData));
DateTime stimStartTime = DateTime.Now;
stimStopTime = stimStartTime.AddMilliseconds(((double)stim_params[3] * 1000.0) / (double)stim_params[4]);
stimTimer = new System.Threading.Timer(stim_timer_tick, null, 100, 100);
}
}
private void bw_openLoop_DoWork(object sender, DoWorkEventArgs e)
{
//DEBUGGING
stimPulseTask.Control(TaskAction.Verify);
stimDigitalTask.Control(TaskAction.Verify);
stim_params sp = (stim_params)e.Argument;
//Create randomized list of channels
int numStimChannels = sp.stimChannelList.GetLength(0);
ArrayList chListSorted = new ArrayList(numStimChannels);
int[] chListRand = new int[numStimChannels];
for (int i = 0; i < numStimChannels; ++i)
chListSorted.Add(sp.stimChannelList[i]);
Random r = new Random();
for (int i = 0; i < numStimChannels; ++i)
{
int j = r.Next(chListSorted.Count);
chListRand[i] = (int)chListSorted[j];
chListSorted.RemoveAt(j);
}
StimPulse spulse = new StimPulse(sp.width1, sp.width2, sp.v1, sp.v2, chListRand, sp.rate, sp.offsetVoltage, sp.interphaseLength, sp.prephaseLength, sp.postphaseLength);
stimPulseWriter.WriteMultiSample(true, spulse.analogPulse);
if (Properties.Settings.Default.StimPortBandwidth == 32)
stimDigitalWriter.WriteMultiSamplePort(true, spulse.digitalData);
else if (Properties.Settings.Default.StimPortBandwidth == 8)
stimDigitalWriter.WriteMultiSamplePort(true, StimPulse.convertTo8Bit(spulse.digitalData));
}
private void bw_genExpt_DoWork(object sender, DoWorkEventArgs e)
{
//NB: Within new threads, you shouldn't reference any of the main forms controls
//expt_Params ep = (expt_Params)e.Argument;
List<Object> exptParams = (List<Object>)e.Argument; //exptParams.Add(channels, numTrials, voltages, pulsesPerTrain, pulseWidths, trainRate);
int[] channels = (int[])exptParams[0];
int numTrials = (int)exptParams[1];
double[] voltages = (double[])exptParams[2];
int[] pulsesPerTrain = (int[])exptParams[3];
int[] pulseWidths = (int[])exptParams[4];
int trainRate = (int)exptParams[5];
stimList = new ArrayList(channels.Length * voltages.Length * numTrials * pulseWidths.Length * pulsesPerTrain.Length);
for (int i = 0; i < channels.Length; ++i)
{
for (int v = 0; v < voltages.Length; ++v)
{
for (int ppt = 0; ppt < pulsesPerTrain.Length; ++ppt)
{
for (int pw = 0; pw < pulseWidths.Length; ++pw)
{
for (int j = 0; j < numTrials; ++j) //Repeat each test 5x
{
StimPulse sp = new StimPulse(pulseWidths[pw], pulseWidths[pw], voltages[v], -voltages[v], channels[i], pulsesPerTrain[ppt], trainRate, 0.0, 0, 100, 100, false);
stimList.Add(sp);
}
}
}
}
}
}