/// <summary>
/// 主工件图
/// </summary>
/// <param name="workpiecePart"></param>
private void HostWorkpieceDrawing(double scale)
{
Part workPart = Session.GetSession().Parts.Work;
DrawingSheet[] st = workPart.DrawingSheets.ToArray();
if (st.Length > 0)
{
DeleteObject.Delete(st);
}
this.originPoint = PointUtils.CreatePointFeature(this.work.Info.Matr.GetCenter());
WorkpieceDrawing dra = new WorkpieceDrawing(hostDraw, work, workDra, this.originPoint);
try
{
NXOpen.Drawings.DrawingSheet sheet = Basic.DrawingUtils.DrawingSheet(workpieceDrawTemplate, 297, 420, workDra.HostComp[0].Name);
dra.CreateView(scale, GetFirstPoint(hostDraw, scale), this.workpieceTablePath);
double[] plistOrigin = { 180, 120, 0 };
Basic.DrawingUtils.CreatePlist(plistPath, plistOrigin);
Basic.DrawingUtils.UpdateViews(sheet);
}
catch (NXException ex)
{
ClassItem.WriteLogFile(hostDraw.WorkpiecePart.Name + "创建图纸错误！ " + ex.Message);
return;
}
}
void CreateEACT_BOTTOMView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var bottomView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_BOTTOM).Tag, selections, pos, size, edmConfig);
var bottomViewBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomView, electrode.ElecBody);
var yPlusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewBorderPoints[1])); }, bottomView.Tag);
var yMinusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewBorderPoints[0])); }, bottomView.Tag);
var xPlusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewBorderPoints[0], bottomViewBorderPoints[1])); }, bottomView.Tag);
var xMinusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewBorderPoints[2], bottomViewBorderPoints[3])); }, bottomView.Tag);
//电极仰视图
EdmDraw.DrawBusiness.CreateVerticalDim(bottomView.Tag, yPlusSideFace.NXOpenTag, yMinusSideFace.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X + (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).X / 2), bottomView.GetDrawingReferencePoint().Y, 0));
EdmDraw.DrawBusiness.CreatePerpendicularDim(bottomView.Tag, xPlusSideFace.NXOpenTag, xMinusSideFace.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X, bottomView.GetDrawingReferencePoint().Y + (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).Y / 2), 0));
var bottomViewElecHeadBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomView, electrode.ElecHeadFaces);
var yPlusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewElecHeadBorderPoints[1])); }, bottomView.Tag);
var yMinusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewElecHeadBorderPoints[0])); }, bottomView.Tag);
var xPlusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewElecHeadBorderPoints[0], bottomViewElecHeadBorderPoints[1])); }, bottomView.Tag);
var xMinusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewElecHeadBorderPoints[2], bottomViewElecHeadBorderPoints[3])); }, bottomView.Tag);
EdmDraw.DrawBusiness.CreateVerticalDim(bottomView.Tag, yPlusElectrodeEdge.NXOpenTag, yMinusElectrodeEdge.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X - (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).X / 2), bottomView.GetDrawingReferencePoint().Y, 0));
EdmDraw.DrawBusiness.CreatePerpendicularDim(bottomView.Tag, xPlusElectrodeEdge.NXOpenTag, xMinusElectrodeEdge.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X, bottomView.GetDrawingReferencePoint().Y - (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).Y / 2), 0));
}
public static string ExportPDF(NXOpen.Drawings.DrawingSheet ds, string dsName)
{
if (Directory.Exists(_pdfFilePath))
{
Directory.Delete(_pdfFilePath, true);
}
Directory.CreateDirectory(_pdfFilePath);
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
Part displayPart = theSession.Parts.Display;
PrintPDFBuilder printPDFBuilder1;
printPDFBuilder1 = workPart.PlotManager.CreatePrintPdfbuilder();
NXObject[] sheets1 = new NXObject[1];
NXOpen.Drawings.DrawingSheet drawingSheet1 = ds;
sheets1[0] = drawingSheet1;
printPDFBuilder1.SourceBuilder.SetSheets(sheets1);
var fileName = string.Format("{0}{1}", dsName, ".pdf");
var result = System.IO.Path.Combine(_pdfFilePath, fileName);
printPDFBuilder1.Filename = result;
NXObject nXObject1;
nXObject1 = printPDFBuilder1.Commit();
printPDFBuilder1.Destroy();
return(result);
}
private void CreateView()
{
double scale = GetScale();
NXOpen.Drawings.DrawingSheet sheet = Basic.DrawingUtils.DrawingSheet(eleTemplate, 297, 420, draInfo.DraModel.AssembleName);
Point3d origin = GetViewOriginPt(scale);
Point3d projectedPt = new Point3d(0, 0, 0);
projectedPt.X = origin.X;
projectedPt.Y = origin.Y - (draInfo.DisPt.Y + draInfo.DisPt.Z) * scale - 30;
DraftingView topView = Basic.DrawingUtils.CreateView("TOP", origin, scale, draInfo.DraModel.Work.WorkMatr, draInfo.GetHideComp());
DraftingView proView = Basic.DrawingUtils.CreateProjectedView(topView, projectedPt, scale);
double eleScale = GetEleScale();
int[] pre = draInfo.DraModel.Eles[0].EleInfo.Preparation;
Point3d eleOrigin = GetEleOrigin(eleScale);
Point3d projectedElePt1 = new Point3d(eleOrigin.X, eleOrigin.Y + (pre[1] * eleScale / 2 + pre[2] * eleScale / 2 + 30), 0);
Point3d projectedElePt2 = new Point3d(projectedElePt1.X - (pre[0] * eleScale / 2 + pre[1] * eleScale / 2 + 30), projectedElePt1.Y, 0);
DraftingView topEleView = Basic.DrawingUtils.CreateView("TOP", eleOrigin, eleScale, draInfo.DraModel.Eles[0].EleMatr, draInfo.GetEleHideComp());
Basic.DrawingUtils.SetWireframeColorSource(NXOpen.Preferences.GeneralWireframeColorSourceOption.FromFace, topEleView);
DraftingView proEleView1 = Basic.DrawingUtils.CreateProjectedView(topEleView, projectedElePt1, eleScale);
DraftingView proEleView2 = Basic.DrawingUtils.CreateProjectedView(proEleView1, projectedElePt2, eleScale);
Matrix4 mat = new Matrix4(draInfo.DraModel.Eles[0].EleMatr);
mat.RolateWithX(-2 * Math.PI / 5);
mat.RolateWithY(Math.PI / 10);
DraftingView topEleView2 = Basic.DrawingUtils.CreateView("Trimetric", new Point3d(240, 120, 0), eleScale, mat, draInfo.GetEleHideComp());
List <Point> elePoint = this.draInfo.DraModel.GetEleCompPint();
Point workPoint = this.draInfo.DraModel.GetWorkCompPoint();
TopDimension(topView, origin, scale, workPoint, elePoint);
ProViewDimension(proView, projectedPt, scale, workPoint, elePoint);
List <Face> face = this.draInfo.EleFaceSort();
// EleTopDimension(topEleView, eleOrigin, eleScale, face[0]);
EleProViewDimension(proEleView2, projectedElePt2, eleScale, face[10], elePoint[0]);
SetViewVisible(new DraftingView[6] {
topView, proView, topEleView, proEleView1, proEleView2, topEleView2
});
if (this.draInfo.DraModel.EleInfo.IsPreparation)
{
Basic.DrawingUtils.SetNote(new Point3d(130, 20, 0), 6, "标准铜料");
}
else if (!this.draInfo.DraModel.EleInfo.IsPreparation)
{
Basic.DrawingUtils.SetNote(new Point3d(130, 20, 0), 6, "非标准铜料");
}
Basic.DrawingUtils.SetNote(new Point3d(130, 30, 0), 4, this.draInfo.EleModel.EleInfo.ElePresentation);
Basic.DrawingUtils.UpdateViews(sheet);
}
/// <summary>
/// 创建特征
/// </summary>
public void CreateBulider()
{
CreatDwgPart();
NXOpen.Drawings.DrawingSheet sheet = CreateSetValueView();
CreateEleView();
SetLayer(201);
SetNode();
Basic.DrawingUtils.UpdateViews(sheet);
Session.GetSession().ApplicationSwitchImmediate("UG_APP_DRAFTING");
model.PartTag.Save(BasePart.SaveComponents.False, BasePart.CloseAfterSave.False);
}
/// <summary>
/// 更新视图
/// </summary>
public static void UpdateViews(NXOpen.Drawings.DrawingSheet sheet)
{
Part workPart = theSession.Parts.Work;
List <NXOpen.Drawings.DraftingView> views = new List <DraftingView>();
foreach (DraftingView dv in sheet.GetDraftingViews())
{
if (dv.IsOutOfDate)
{
views.Add(dv);
}
}
workPart.DraftingViews.UpdateViews(views.ToArray());
}
private void FixCreateBalloonDlg_Load(object sender, EventArgs e)
{
#region 系統環境
Variables.Is_Local = Environment.GetEnvironmentVariable("UGII_ENV_FILE");
if (Variables.Is_Local == null)
{
MessageBox.Show("請先使用系統後再執行！");
this.Close();
return;
}
#endregion
//抓取目前圖紙數量和Tag
//取得全部尺寸資料，並整理出尺寸落在的圖紙&尺寸設定的自定義泡泡再填入Panel中(當使用者點自定義時使用)
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
Dictionary <NXObject, Sheet_DefineNum> DicUserDefine = new Dictionary <NXObject, Sheet_DefineNum>();
for (int i = 0; i < SheetCount; i++)
{
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
CurrentSheet.View.UpdateDisplay();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
GetUserDefineData(SheetObj, CurrentSheet.Name, ref DicUserDefine);
}
NXOpen.Drawings.DrawingSheet DefaultSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[0]);
DefaultSheet.Open();
int count = 0;
GridRow row = new GridRow();
foreach (KeyValuePair <NXObject, Sheet_DefineNum> kvp in DicUserDefine)
{
row = new GridRow(new object[SGC.PrimaryGrid.Columns.Count]);
SGC.PrimaryGrid.Rows.Add(row);
count = count + 1;
row.Cells["序號"].Value = count;
row.Cells["尺寸位置"].Value = kvp.Value.sheet;
row.Cells["自定泡泡號"].Value = kvp.Value.defineNum;
row.Cells["Dimension"].Value = kvp.Key;
}
}
void CreateEACT_BOTTOM_FRONTView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var bottomFrontView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_BOTTOM_FRONT).Tag, selections, pos, size, edmConfig);
var baseFace = electrode.BaseFace;
var bottomFrontViewBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomFrontView, electrode.ElecBody);
var bottomFrontViewTopPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomFrontViewBorderPoints[3])); }, bottomFrontView.Tag);
var bottomFrontViewBottomPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomFrontViewBorderPoints[2])); }, bottomFrontView.Tag);
//电极前视图
EdmDraw.DrawBusiness.CreateVerticalDim(
bottomFrontView.Tag,
bottomFrontViewTopPoint.NXOpenTag,
bottomFrontViewBottomPoint.NXOpenTag,
new Snap.Position(bottomFrontView.GetDrawingReferencePoint().X + (EdmDraw.DrawBusiness.GetBorderSize(bottomFrontView.Tag).X / 2), bottomFrontView.GetDrawingReferencePoint().Y));
EdmDraw.DrawBusiness.CreateVerticalDim(bottomFrontView.Tag, baseFace.NXOpenTag, bottomFrontViewBottomPoint.NXOpenTag,
new Snap.Position(bottomFrontView.GetDrawingReferencePoint().X - (EdmDraw.DrawBusiness.GetBorderSize(bottomFrontView.Tag).X / 2), bottomFrontView.GetDrawingReferencePoint().Y));
}
/// <summary>
/// 更新视图
/// </summary>
public static void UpdateViews(NXOpen.Drawings.DrawingSheet sheet)
{
Part workPart = theSession.Parts.Work;
List <NXOpen.Drawings.DraftingView> views = new List <DraftingView>();
foreach (DraftingView dv in sheet.GetDraftingViews())
{
if (dv.IsOutOfDate)
{
views.Add(dv);
}
}
try
{
workPart.DraftingViews.UpdateViews(views.ToArray());
}
catch (NXException ex)
{
LogMgr.WriteLog("DrawingUtils:UpdateViews" + ex.Message);
throw ex;
}
}
/// <summary>
/// 创建设定图
/// </summary>
public NXOpen.Drawings.DrawingSheet CreateSetValueView()
{
Matrix4 inv = model.GetWorkMatr().GetInversMatrix();
inv.ApplyPos(ref centerPt);
double scale = model.GetScale(130.0, 170.0, disPt);
NXOpen.Drawings.DrawingSheet sheet = Basic.DrawingUtils.DrawingSheet(eleTemplate, 297, 420, model.AssembleName);
Point3d origin = GetSetValueViewOriginPt(scale);
Point3d projectedPt = new Point3d(0, 0, 0);
projectedPt.X = origin.X;
projectedPt.Y = origin.Y - (disPt.Y + disPt.Z) * scale - 30;
DraftingView topView = null;
DraftingView proView = null;
try
{
topView = Basic.DrawingUtils.CreateView("TOP", origin, scale, model.GetWorkMatr(), setValueHidden.ToArray());
proView = Basic.DrawingUtils.CreateProjectedView(topView, projectedPt, scale);
}
catch (NXException ex)
{
ClassItem.WriteLogFile(model.AssembleName + "视图创建错误！" + ex.Message);
}
Point workPt = model.CreateCenterPoint();
List <Point> setPt = model.GetEleSetPoint();
if (topView != null || workPt == null || setPt.Count > 0)
{
TopDimension(topView, scale, origin, workPt, setPt);
}
if (proView != null || workPt == null || setPt.Count > 0)
{
ProViewDimension(proView, scale, projectedPt, workPt, setPt);
}
SetViewVisible(new DraftingView[] { topView, proView });
return(sheet);
}
BaseView CreateEACT_FRONTView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var frontView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_FRONT).Tag, selections, pos, size, edmConfig);
var frontViewRightMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Right, frontView);
var frontViewLeftMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Left, frontView);
var ufSession = NXOpen.UF.UFSession.GetUFSession();
var originPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(Snap.Globals.Wcs.Origin)); }, frontView.Tag);
var elecBasePoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(electrode.GetElecBasePos())); }, frontView.Tag);
var drawBorderPoints = EdmDraw.DrawBusiness.GetDrawBorderPoint(frontView, Snap.NX.Body.Wrap(selections.First().Tag));
var listY = Enumerable.Select(drawBorderPoints, u => u.Y).ToList();
var listX = Enumerable.Select(drawBorderPoints, u => u.X).ToList();
listY.Add(EdmDraw.DrawBusiness.MapModelToDrawing(frontView.Tag, originPoint.Position).Y);
listY.Distinct().ToList().ForEach(u => {
var tempModel = new double[] { 0, 0, 0 };
ufSession.View.MapDrawingToModel(frontView.Tag, new double[] { listX.Min(), u }, tempModel);
var tempU = EdmDraw.DrawBusiness.CreateNxObject <Snap.NX.Point>(() => { return(Snap.Create.Point(tempModel)); }, frontView.Tag);
EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
frontView.Tag,
originPoint.NXOpenTag,
frontViewLeftMargin.NXOpenTag,
tempU.NXOpenTag
);
});
var frontViewOrddimension = EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
frontView.Tag,
originPoint.NXOpenTag,
frontViewRightMargin.NXOpenTag,
elecBasePoint.NXOpenTag
);
EdmDraw.DrawBusiness.SetToleranceType(frontViewOrddimension);
return(frontView);
}
private bool JudgmentBalloon(GridRow row)
{
string oldBalloon = "";
try
{
oldBalloon = ((NXObject)row.Cells["Dimension"].Value).GetStringAttribute(CaxME.DimenAttr.BallonNum);
if (oldBalloon == row.Cells["自定泡泡號"].Value.ToString())
{
return(false);
}
NXOpen.Drawings.DrawingSheet drawingSheet1 = (NXOpen.Drawings.DrawingSheet)workPart.DrawingSheets.FindObject(row.Cells["尺寸位置"].Value.ToString());
NXObject[] SheetObj = CaxME.FindObjectsInView(drawingSheet1.View.Tag).ToArray();
CaxME.DeleteFixBallon(oldBalloon, SheetObj);
workPart.Views.Refresh();
}
catch (System.Exception ex)
{
oldBalloon = "";
}
return(true);
}
/// <summary>
/// 创建一张其他工件图
/// </summary>
/// <param name="other"></param>
/// <param name="scale"></param>
private void OtherWorkpieceView(List <WorkpieceDrawingModel> other, double scale)
{
Point3d firstPt = GetFirstPoint(other[0], scale);
double length = 0;
foreach (WorkpieceDrawingModel wk in other)
{
length += 2 * wk.DisPt.X * scale;
}
int k = 0;
if (other.Count == 1)
{
k = 0;
}
else
{
k = (int)Math.Floor(300 - length) / (other.Count - 1);
}
NXOpen.Drawings.DrawingSheet sheet = Basic.DrawingUtils.DrawingSheet(workpieceDrawTemplate, 297, 420, other[0].WorkpiecePart.Name);
for (int i = 0; i < other.Count; i++)
{
Point3d temp;
if (i == 0)
{
temp = firstPt;
}
else
{
double x = other[i - 1].DisPt.X * scale + other[i].DisPt.X * scale + i * k;
temp = new Point3d(firstPt.X + x, firstPt.Y, firstPt.Z);
}
WorkpieceDrawing wd = new WorkpieceDrawing(other[i], this.work, workDra, this.originPoint);
wd.CreateView(scale, temp, this.workpieceTablePath);
}
Basic.DrawingUtils.UpdateViews(sheet);
}
/// <summary>
/// 创建图纸模板
/// </summary>
/// <param name="sheetPath">模板地址</param>
/// <param name="height">模板高</param>
/// <param name="length">模板长</param>
/// <param name="drawName">图纸名</param>
/// <returns></returns>
public static NXOpen.Drawings.DrawingSheet DrawingSheet(string sheetPath, double height, double length, string drawName)
{
Part workPart = theSession.Parts.Work;
NXOpen.Drawings.DrawingSheet nullNXOpen_Drawings_DrawingSheet = null;
NXOpen.Drawings.DrawingSheetBuilder drawingSheetBuilder1;
drawingSheetBuilder1 = workPart.DrawingSheets.DrawingSheetBuilder(nullNXOpen_Drawings_DrawingSheet);
drawingSheetBuilder1.AutoStartViewCreation = true; //自动创建视图设置
drawingSheetBuilder1.StandardMetricScale = NXOpen.Drawings.DrawingSheetBuilder.SheetStandardMetricScale.S11; //设置图纸比例为1:1
drawingSheetBuilder1.Height = height;
drawingSheetBuilder1.Length = length;
drawingSheetBuilder1.ScaleNumerator = 1.0; //自定义比例分子
drawingSheetBuilder1.ScaleDenominator = 1.0; //自定义比例分母
drawingSheetBuilder1.Units = NXOpen.Drawings.DrawingSheetBuilder.SheetUnits.Metric; //图纸单位为公制
drawingSheetBuilder1.ProjectionAngle = NXOpen.Drawings.DrawingSheetBuilder.SheetProjectionAngle.Third; //投影视角为第三视角
drawingSheetBuilder1.Number = "1"; //创建或编辑图纸的编号
drawingSheetBuilder1.SecondaryNumber = ""; //创建或编辑图纸的次要编号
drawingSheetBuilder1.Revision = "A"; //创建或编辑图纸的修订版
drawingSheetBuilder1.MetricSheetTemplateLocation = sheetPath; //模板地址
drawingSheetBuilder1.Name = drawName;
try
{
NXOpen.NXObject nXObject1;
nXObject1 = drawingSheetBuilder1.Commit();
nXObject1.SetName(drawName);
return(nXObject1 as NXOpen.Drawings.DrawingSheet);
}
catch (Exception ex)
{
LogMgr.WriteLog("DrawingUtils.DrawingSheet" + ex.Message);
return(null);
}
finally
{
drawingSheetBuilder1.Destroy();
}
}
private void InsertBalloon(GridRow row, CoordinateData cCoordinateData)
{
try
{
//取得圖紙長、高
NXOpen.Drawings.DrawingSheet drawingSheet1 = (NXOpen.Drawings.DrawingSheet)workPart.DrawingSheets.FindObject(row.Cells["尺寸位置"].Value.ToString());
drawingSheet1.Open();
double SheetLength = drawingSheet1.Length;
double SheetHeight = drawingSheet1.Height;
//事先塞入該尺寸所在Sheet
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.SheetName, row.Cells["尺寸位置"].Value.ToString());
//計算泡泡座標
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)row.Cells["Dimension"].Value).Tag, out cBoxCoordinate);
DimenData sDimenData = new DimenData();
Variables.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
//決定數字的大小
double BallonNumSize = 0;
if (Convert.ToInt32(row.Cells["自定泡泡號"].Value) <= 9)
{
BallonNumSize = 2.5;
}
else if (Convert.ToInt32(row.Cells["自定泡泡號"].Value) > 9 && Convert.ToInt32(row.Cells["自定泡泡號"].Value) <= 99)
{
BallonNumSize = 1.5;
}
else
{
BallonNumSize = 1;
}
NXObject balloonObj = null;
CaxME.CreateBallonOnSheet(row.Cells["自定泡泡號"].Value.ToString(), BallonLocation, BallonNumSize, "BalloonAtt", out balloonObj);
//取得該尺寸數量
string diCount = "";
try
{
diCount = ((NXObject)row.Cells["Dimension"].Value).GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
//當遇到舊料號沒有Dicount的屬性時，在這邊補上
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.DiCount, "1");
diCount = "1";
}
//如果大於1表示要插入a.b.c.....
if (diCount != "1")
{
//文字座標
CaxME.BoxCoordinate sBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(balloonObj.Tag, out sBoxCoordinate);
Point3d textCoord = new Point3d(sBoxCoordinate.lower_left[0] + 1.5, sBoxCoordinate.lower_left[1] - 1.5, 0);
string countText = Convert.ToChar(65 + 0).ToString().ToLower() + "-" + Convert.ToChar(65 + Convert.ToInt32(diCount) - 1).ToString().ToLower();
CaxME.InsertDicountNote(row.Cells["自定泡泡號"].Value.ToString(), CaxME.DimenAttr.DiCount, countText, "1.8", textCoord);
}
#region 計算泡泡相對位置
string RegionX = "", RegionY = "";
for (int ii = 0; ii < cCoordinateData.DraftingCoordinate.Count; ii++)
{
string SheetSize = cCoordinateData.DraftingCoordinate[ii].SheetSize;
if (Math.Ceiling(SheetHeight) != Convert.ToDouble(SheetSize.Split(',')[0]) || Math.Ceiling(SheetLength) != Convert.ToDouble(SheetSize.Split(',')[1]))
{
continue;
}
//比對X
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionX.Count; j++)
{
string X0 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X0;
string X1 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X1;
if (BallonLocation.X >= Convert.ToDouble(X0) && BallonLocation.X <= Convert.ToDouble(X1))
{
RegionX = cCoordinateData.DraftingCoordinate[ii].RegionX[j].Zone;
}
}
//比對Y
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionY.Count; j++)
{
string Y0 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y0;
string Y1 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y1;
if (BallonLocation.Y >= Convert.ToDouble(Y0) && BallonLocation.Y <= Convert.ToDouble(Y1))
{
RegionY = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Zone;
}
}
}
#endregion
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.BallonNum, row.Cells["自定泡泡號"].Value.ToString());
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.BallonLocation, row.Cells["尺寸位置"].Value.ToString() + "-" + RegionY + RegionX);
workPart.Views.Refresh();
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
//------------------------------------------------------------------------------
// Explicit Activation
// This entry point is used to activate the application explicitly
//------------------------------------------------------------------------------
public static int Main(string[] args)
{
int retValue = 0;
try
{
theProgram = new Program();
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
Part displayPart = theSession.Parts.Display;
int module_id;
theUfSession.UF.AskApplicationModule(out module_id);
if (module_id != UFConstants.UF_APP_DRAFTING)
{
MessageBox.Show("請先轉換為製圖模組後再執行！");
return(retValue);
}
bool status, Is_Keep;
//抓取目前圖紙數量和Tag
//取得全部尺寸資料，並整理出尺寸落在的圖紙&尺寸設定的自定義泡泡再填入Panel中(當使用者點自定義時使用)
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
Dictionary <NXObject, Sheet_DefineNum> DicUserDefine = new Dictionary <NXObject, Sheet_DefineNum>();
for (int i = 0; i < SheetCount; i++)
{
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
CurrentSheet.View.UpdateDisplay();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
GetUserDefineData(SheetObj, CurrentSheet.Name, ref DicUserDefine);
}
NXOpen.Drawings.DrawingSheet DefaultSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[0]);
DefaultSheet.Open();
Application.EnableVisualStyles();
CreateBallonDlg cCreateBallonDlg = new CreateBallonDlg(DicUserDefine);
FormUtilities.ReparentForm(cCreateBallonDlg);
System.Windows.Forms.Application.Run(cCreateBallonDlg);
if (cCreateBallonDlg.DialogResult == DialogResult.Yes)
{
Is_Keep = cCreateBallonDlg.Is_Keep;
cCreateBallonDlg.Dispose();
}
else
{
((NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[0])).Open();
cCreateBallonDlg.Dispose();
theProgram.Dispose();
return(retValue);
}
#region 前置處理
string Is_Local = Environment.GetEnvironmentVariable("UGII_ENV_FILE");
CoordinateData cCoordinateData = new CoordinateData();
if (Is_Local != null)
{
//取得圖紙範圍資料Data
status = CaxGetDatData.GetDraftingCoordinateData(out cCoordinateData);
if (!status)
{
return(retValue);
}
}
else
{
string DraftingCoordinate_dat = "DraftingCoordinate.dat";
string DraftingCoordinate_Path = string.Format(@"{0}\{1}", "D:", DraftingCoordinate_dat);
CaxPublic.ReadCoordinateData(DraftingCoordinate_Path, out cCoordinateData);
}
//圖紙長、高
double SheetLength = 0;
double SheetHeight = 0;
//取得最後一顆泡泡的數字
int MaxBallonNum;
try
{
MaxBallonNum = Convert.ToInt32(workPart.GetStringAttribute(CaxME.DimenAttr.BallonNum));
}
catch (System.Exception ex)
{
MaxBallonNum = 0;
}
#endregion
//重新產生泡泡
if (Is_Keep == false)
{
#region 刪除全部泡泡
IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
IdSymbol[] BallonAry = BallonCollection.ToArray();
foreach (IdSymbol i in BallonAry)
{
try
{
i.GetStringAttribute("BalloonAtt");
}
catch (System.Exception ex)
{
continue;
}
CaxPublic.DelectObject(i);
}
workPart.DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, "BALLONNUM");
#endregion
#region 存DicDimenData(string=檢具名稱,DimenData=尺寸物件、泡泡座標)
DefineParam.DicDimenData = new Dictionary <string, List <DimenData> >();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
//string SheetName = "S" + (i + 1).ToString();
//CaxME.SheetRename(CurrentSheet, SheetName);
CurrentSheet.Open();
if (i == 0)
{
DefineParam.FirstDrawingSheet = CurrentSheet;
}
//取得圖紙長、高
SheetLength = CurrentSheet.Length;
SheetHeight = CurrentSheet.Height;
//DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
#region 刪除尺寸數量產生的文字(ex:a-c)
string dicount = "", chekcLevel = "";
try
{
dicount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
dicount = "";
}
try
{
chekcLevel = singleObj.GetStringAttribute(CaxME.DimenAttr.CheckLevel);
}
catch (System.Exception ex)
{
chekcLevel = "";
}
if (dicount != "" && chekcLevel == "")
{
CaxPublic.DelectObject(singleObj);
}
#endregion
string Gauge = "", AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try{ AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.AssignExcelType); }
catch (System.Exception ex) { continue; }
try{ Gauge = singleObj.GetStringAttribute(CaxME.DimenAttr.Gauge); }
catch (System.Exception ex) { }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
//string DimeType = singleObj.GetType().ToString();
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
//GetTextBoxCoordinate(DimeType, singleObj, out cBoxCoordinate);
//可以將NXOpen直接轉型成Annotation
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)singleObj).Tag, out cBoxCoordinate);
#region 計算泡泡座標
DimenData sDimenData = new DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
Functions.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
if (Gauge != "")
{
List <DimenData> ListDimenData = new List <DimenData>();
status = DefineParam.DicDimenData.TryGetValue(Gauge, out ListDimenData);
if (!status)
{
ListDimenData = new List <DimenData>();
}
ListDimenData.Add(sDimenData);
DefineParam.DicDimenData[Gauge] = ListDimenData;
}
}
}
#endregion
//插入泡泡
int BallonNum = 0;
InsertBallon(ref BallonNum, cCoordinateData, SheetHeight, SheetLength, "BalloonAtt");
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
//保留泡泡
else
{
#region 存DicDimenData(string=檢具名稱,DimenData=尺寸物件、泡泡座標)
DefineParam.DicDimenData = new Dictionary <string, List <DimenData> >();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
DefineParam.FirstDrawingSheet = CurrentSheet;
}
//取得圖紙長、高
SheetLength = CurrentSheet.Length;
SheetHeight = CurrentSheet.Height;
//DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
//判斷是否取到舊的尺寸，如果是就跳下一個
string OldBallonNum = "";
try
{
OldBallonNum = singleObj.GetStringAttribute(CaxME.DimenAttr.BallonNum);
continue;
}
catch (System.Exception ex) { }
//判斷是否有屬性，沒有屬性就跳下一個
string Gauge = "", AssignExcelType = "";
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.AssignExcelType); }
catch (System.Exception ex) { continue; }
try { Gauge = singleObj.GetStringAttribute(CaxME.DimenAttr.Gauge); }
catch (System.Exception ex) { }
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
//string DimeType = "";
//DimeType = singleObj.GetType().ToString();
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
//GetTextBoxCoordinate(DimeType, singleObj, out cBoxCoordinate);
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[0].ToString());
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)singleObj).Tag, out cBoxCoordinate);
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[0].ToString());
#region 計算泡泡座標
DimenData sDimenData = new DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
Functions.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
if (Gauge != "")
{
List <DimenData> ListDimenData = new List <DimenData>();
status = DefineParam.DicDimenData.TryGetValue(Gauge, out ListDimenData);
if (!status)
{
ListDimenData = new List <DimenData>();
}
ListDimenData.Add(sDimenData);
DefineParam.DicDimenData[Gauge] = ListDimenData;
}
}
}
#endregion
if (DefineParam.DicDimenData.Count != 0)
{
//插入泡泡
InsertBallon(ref MaxBallonNum, cCoordinateData, SheetHeight, SheetLength, "BalloonAtt");
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
}
//切回第一張Sheet
DefineParam.FirstDrawingSheet.Open();
MessageBox.Show("完成");
theProgram.Dispose();
}
catch (NXOpen.NXException ex)
{
// ---- Enter your exception handling code here -----
CaxLog.ShowListingWindow(ex.ToString());
}
return(retValue);
}
void CreateEACT_ISOMETRICView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, EdmDraw.EdmConfig edmConfig)
{
var view = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_ISOMETRIC).Tag, selections, pos, size, edmConfig);
}
private void OK_Click(object sender, EventArgs e)
{
//抓取目前圖紙數量和Tag
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
//取得最後一顆泡泡的數字
int MaxBallonNum;
try
{
MaxBallonNum = Convert.ToInt32(workPart.GetStringAttribute(CaxME.DimenAttr.BallonNum));
}
catch (System.Exception ex)
{
MaxBallonNum = 0;
}
if (chb_Regeneration.Checked == true)
{
#region 刪除全部泡泡
IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
IdSymbol[] BallonAry = BallonCollection.ToArray();
foreach (IdSymbol i in BallonAry)
{
try
{
i.GetStringAttribute("BalloonAtt");
}
catch (System.Exception ex)
{
continue;
}
CaxPublic.DelectObject(i);
}
workPart.DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, "BALLONNUM");
#endregion
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
int BallonNum = 0;
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
string diCount = "", fixDiemnsion = "";
#region 刪除尺寸數量產生的文字(ex:a-c)
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "";
}
try
{
fixDiemnsion = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension);
}
catch (System.Exception ex)
{
fixDiemnsion = "";
}
if (diCount != "" && fixDiemnsion == "")
{
CaxPublic.DelectObject(singleObj);
}
#endregion
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
BallonNum++;
InsertBalloon(BallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
}
else if (chb_keepOrigination.Checked == true)
{
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
//判斷是否取到舊的尺寸，如果是就跳下一個
string OldBallonNum = "";
try
{
OldBallonNum = singleObj.GetStringAttribute(CaxME.DimenAttr.BallonNum);
continue;
}
catch (System.Exception ex) { }
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
MaxBallonNum++;
string diCount = "";
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "1";
}
InsertBalloon(MaxBallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
}
else if (chb_UserDefine.Checked == true)
{
//判斷所有的泡泡是否有重複
List <string> ListIsRepeat = new List <string>();
foreach (GridRow i in SGC.PrimaryGrid.Rows)
{
if (i.Cells["自定泡泡號"].Value.ToString() == "")
{
continue;
}
if (ListIsRepeat.Contains(i.Cells["自定泡泡號"].Value.ToString()))
{
MessageBox.Show("泡泡號【" + i.Cells["自定泡泡號"].Value.ToString() + "】重複，請重新檢查");
return;
}
else
{
ListIsRepeat.Add(i.Cells["自定泡泡號"].Value.ToString());
}
}
CoordinateData cCoordinateData = new CoordinateData();
CaxGetDatData.GetDraftingCoordinateData(out cCoordinateData);
//開始插入自定義泡泡
foreach (GridRow i in SGC.PrimaryGrid.Rows)
{
//判斷是否有舊的泡泡，如果舊泡泡與自定的相同，則跳下一個
//判斷是否有舊的泡泡，如果舊泡泡與自定的不相同，則先刪除泡泡再重新產生
//如有Dicount也要加入一起生成
//如果沒有自定泡泡就跳下一個row
if (i.Cells["自定泡泡號"].Value.ToString() == "")
{
//判斷是否需刪除已存在的泡泡
NXOpen.Drawings.DrawingSheet drawingSheet1 = (NXOpen.Drawings.DrawingSheet)workPart.DrawingSheets.FindObject(i.Cells["尺寸位置"].Value.ToString());
string oldBalloon = "";
try
{
oldBalloon = ((NXObject)i.Cells["Dimension"].Value).GetStringAttribute(CaxME.DimenAttr.BallonNum);
}
catch (System.Exception ex)
{
continue;
}
NXObject[] SheetObj = CaxME.FindObjectsInView(drawingSheet1.View.Tag).ToArray();
CaxME.DeleteBallon(oldBalloon, SheetObj);
workPart.Views.Refresh();
//刪除屬性
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.BallonNum);
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.BallonLocation);
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.SheetName);
continue;
}
//如果回傳False，表示舊泡泡=自定泡泡；如果回傳True，表示舊泡泡=\=自定泡泡
if (!JudgmentBalloon(i))
{
continue;
}
InsertBalloon(i, cCoordinateData);
}
if (exOnj != null)
{
exOnj.Unhighlight();
workPart.Views.Refresh();
}
}
MessageBox.Show("完成！");
}
BaseView CreateEACT_TOPView(NXOpen.Drawings.DrawingSheet ds, Snap.NX.Body steel, Snap.Position pos, Snap.Position size, List <ElecManage.PositioningInfo> positionings, EdmDraw.EdmConfig edmConfig)
{
var ufSession = NXOpen.UF.UFSession.GetUFSession();
var selections = new List <TaggedObject>();
selections.Add(steel);
positionings.ForEach(p => {
selections.Add(p.Electrode.ElecBody);
});
var topView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_TOP).Tag, selections, pos, size, edmConfig);
var topViewRightMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Right, topView) as Snap.NX.Line;
var topViewTopMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Top, topView) as Snap.NX.Line;
var topViewLeftMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Left, topView) as Snap.NX.Line;
var topViewBottomMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Bottom, topView) as Snap.NX.Line;
var originPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(Snap.Globals.Wcs.Origin)); }, topView.Tag);
var drawBorderPoints = EdmDraw.DrawBusiness.GetDrawBorderPoint(topView, steel);
var originPointMTD = EdmDraw.DrawBusiness.MapModelToDrawing(topView.Tag, originPoint.Position);
var listY = new List <double>();
var listX = new List <double>();
var temPoints = new List <Snap.Position>();
temPoints.Add(originPointMTD);
temPoints.AddRange(drawBorderPoints);
temPoints.OrderByDescending(u => u.Y).ToList().ForEach(u => {
listY.Add(u.Y);
});
temPoints.OrderBy(u => u.X).ToList().ForEach(u => {
listX.Add(u.X);
});
listY = listY.Distinct().ToList();
listX = listX.Distinct().ToList();
listX.ForEach(u =>
{
var tempModel = new double[] { 0, 0, 0 };
ufSession.View.MapDrawingToModel(topView.Tag, new double[] { u, listY.Min() }, tempModel);
var tempU = EdmDraw.DrawBusiness.CreateNxObject <Snap.NX.Point>(() => { return(Snap.Create.Point(tempModel)); }, topView.Tag);
EdmDraw.DrawBusiness.CreateVerticalOrddimension(
topView.Tag,
originPoint.NXOpenTag,
topViewBottomMargin.NXOpenTag,
tempU.NXOpenTag
);
});
listY.ForEach(u =>
{
var tempModel = new double[] { 0, 0, 0 };
ufSession.View.MapDrawingToModel(topView.Tag, new double[] { listX.Min(), u }, tempModel);
var tempU = EdmDraw.DrawBusiness.CreateNxObject <Snap.NX.Point>(() => { return(Snap.Create.Point(tempModel)); }, topView.Tag);
EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
topView.Tag,
originPoint.NXOpenTag,
topViewLeftMargin.NXOpenTag,
tempU.NXOpenTag
);
});
var tempDic = new Dictionary <ElecManage.PositioningInfo, Snap.NX.Point>();
var tempMTDDic = new Dictionary <ElecManage.PositioningInfo, Snap.Position>();
positionings.ForEach(p => {
var electrode = p.Electrode;
var elecBasePoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(p.X, p.Y, p.Z)); }, topView.Tag);
tempDic.Add(p, elecBasePoint);
});
positionings.ForEach(p => {
var positioningMTD = EdmDraw.DrawBusiness.MapModelToDrawing(topView.Tag, tempDic[p].Position.Array);
tempMTDDic.Add(p, positioningMTD);
});
var tempVar = 3;
var psY = positionings.OrderByDescending(p => tempMTDDic[p].Y).ToList();
double tempY = psY.Count > 0 ? tempMTDDic[psY.First()].Y : 0;
psY.ForEach(p => {
var elecBasePoint = tempDic[p];
var elecBasePointMTD = tempMTDDic[p];
var line = topViewTopMargin as Snap.NX.Line;
if (elecBasePointMTD.Y < tempY || Math.Abs(elecBasePointMTD.Y - (edmConfig.DimensionMpr32 * 2 + tempY)) <= SnapEx.Helper.Tolerance)
{
tempY = elecBasePointMTD.Y;
}
Snap.Position origin = new Snap.Position(line.StartPoint.X, tempY);
var minP = new Snap.Position(line.StartPoint.X, elecBasePointMTD.Y);
var newElecBasePointMTD = new Snap.Position(line.StartPoint.X - tempVar, elecBasePointMTD.Y);
var angle = Snap.Vector.Angle(newElecBasePointMTD - minP, newElecBasePointMTD - origin);
var topViewRightElecBasePoint = EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
topView.Tag,
originPoint.NXOpenTag,
topViewRightMargin.NXOpenTag,
elecBasePoint.NXOpenTag
, angle
, origin
, Snap.Compute.Distance(newElecBasePointMTD, topViewRightMargin)
);
EdmDraw.DrawBusiness.SetToleranceType(topViewRightElecBasePoint);
tempY -= edmConfig.DimensionMpr32 * 2;
});
var psX = positionings.OrderByDescending(p => tempMTDDic[p].X).ToList();
double tempX = psX.Count > 0 ? tempMTDDic[psX.First()].X : 0;
psX.ForEach(p =>
{
var index = positionings.IndexOf(p);
var elecBasePoint = tempDic[p];
var elecBasePointMTD = tempMTDDic[p];
var line = topViewTopMargin as Snap.NX.Line;
var distance = Snap.Compute.Distance(elecBasePointMTD, topViewTopMargin);
if (elecBasePointMTD.X < tempX || Math.Abs(elecBasePointMTD.X - (edmConfig.DimensionMpr32 * 2 + tempX)) <= SnapEx.Helper.Tolerance)
{
tempX = elecBasePointMTD.X;
}
Snap.Position origin = new Snap.Position(tempX, line.StartPoint.Y);
var minP = new Snap.Position(elecBasePointMTD.X, line.StartPoint.Y);
var newElecBasePointMTD = new Snap.Position(elecBasePointMTD.X, line.StartPoint.Y - tempVar);
var angle = Snap.Vector.Angle(newElecBasePointMTD - minP, newElecBasePointMTD - origin);
var topViewTopElecBasePoint = EdmDraw.DrawBusiness.CreateVerticalOrddimension(
topView.Tag,
originPoint.NXOpenTag,
topViewTopMargin.NXOpenTag,
elecBasePoint.NXOpenTag
, angle
, origin
, Snap.Compute.Distance(newElecBasePointMTD, topViewTopMargin)
);
EdmDraw.DrawBusiness.SetToleranceType(topViewTopElecBasePoint);
tempX -= edmConfig.DimensionMpr32 * 2;
});
if (positionings.Count > 1)
{
positionings.ForEach(p =>
{
var elecBasePoint = tempDic[p];
var bps = EdmDraw.DrawBusiness.GetDrawBorderPoint(topView, p.Electrode.ElecBody);
var bpXs = Enumerable.Select(bps, u => u.X);
var bpYs = Enumerable.Select(bps, u => u.Y);
var bpX = Math.Abs(bpXs.Max() - bpXs.Min()) * 2 / 3;
var bpY = Math.Abs(bpYs.Max() - bpYs.Min()) * 2 / 3;
var elecBasePointMTD = tempMTDDic[p];
var borderSize = topView.GetBorderSize();
var refPoint = topView.GetDrawingReferencePoint();
EdmDraw.DrawBusiness.CreateLabel(p.N, new Snap.Position(elecBasePointMTD.X - bpX, elecBasePointMTD.Y - bpY), new Snap.Position(), topView.Tag, elecBasePoint.NXOpenTag);
});
}
return(topView);
}
private void Upload_Click(object sender, EventArgs e)
{
try
{
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
//判斷是否需要出PDF
List <DrawingSheet> drawingSheets = new List <DrawingSheet>();
for (int j = 0; j < SheetCount; j++)
{
drawingSheets.Add((DrawingSheet)NXObjectManager.Get(SheetTagAry[j]));
}
if (this.ExportPDF.Checked)
{
if (!Directory.Exists(this.L_Folder))
{
Directory.CreateDirectory(this.L_Folder);
}
string str1 = string.Format(@"{0}\{1}.pdf", this.L_Folder, Path.GetFileNameWithoutExtension(FixInsUploadDlg.displayPart.FullPath));
CaxME.CreateOISPDF(drawingSheets, str1);
//傳OIS圖到SERVER
if (!Directory.Exists(S_Folder))
{
System.IO.Directory.CreateDirectory(S_Folder);
}
CaxPublic.DirectoryCopy(this.L_Folder, S_Folder, true);
}
//取得WorkPart資訊並檢查資料是否完整
DadDimension.WorkPartAttribute sWorkPartAttribute = new DadDimension.WorkPartAttribute();
status = DadDimension.GetWorkPartAttribute(workPart, out sWorkPartAttribute);
if (!status)
{
if (this.ExportPDF.Checked)
{
MessageBox.Show("量測資訊不足，僅上傳PDF檔案，上傳完成！");
}
else
{
MessageBox.Show("量測資訊不足，無法上傳資料！");
}
this.Close();
return;
}
//if (sWorkPartAttribute.draftingVer == "" || sWorkPartAttribute.draftingDate == "" ||
// sWorkPartAttribute.partDescription == "" || sWorkPartAttribute.material == "")
//{
// MessageBox.Show("量測資訊不足");
// this.Close();
// return;
//}
//取得所有量測尺寸資料
List <DadDimension> listDimensionData = new List <DadDimension>();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
CurrentSheet.View.UpdateDisplay();
DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
status = Com_FixDimension.RecordFixDimension(SheetObj, sWorkPartAttribute, ref listDimensionData);
if (!status)
{
this.Close();
return;
}
}
//將圖片存到本機Globaltek內
for (int i = 0; i < PicNameStr.Length; i++)
{
string destFileName = string.Format(@"{0}\{1}", this.L_Folder, PicNameStr[i]);
File.Copy(PicPathStr[i], destFileName, true);
}
//由料號查Com_PEMain
Com_PEMain cCom_PEMain = new Com_PEMain();
status = CaxSQL.GetCom_PEMain(cCaxUpLoad.CusName, cCaxUpLoad.PartName, cCaxUpLoad.CusRev, cCaxUpLoad.OpRev, out cCom_PEMain);
if (!status)
{
return;
}
//由Com_PEMain和Op查Com_PartOperation
Com_PartOperation cCom_PartOperation = new Com_PartOperation();
status = CaxSQL.GetCom_PartOperation(cCom_PEMain, cCaxUpLoad.OpNum, out cCom_PartOperation);
if (!status)
{
return;
}
#region 比對資料庫FixInspection是否有同筆數據
bool Is_Exit = true;
Com_FixInspection cCom_FixInspection = new Com_FixInspection();
CaxSQL.GetCom_FixInspection(cCom_PartOperation, Path.GetFileNameWithoutExtension(workPart.FullPath), out cCom_FixInspection);
if (cCom_FixInspection == null)
{
Is_Exit = false;
}
if (Is_Exit && eTaskDialogResult.Yes == CaxPublic.ShowMsgYesNo("此檢、治具已存在上一筆資料，是否更新?"))
{
#region 刪除Com_FixDimension
IList <Com_FixDimension> listComFixDimension = new List <Com_FixDimension>();
CaxSQL.GetListCom_FixDimension(cCom_FixInspection, out listComFixDimension);
foreach (Com_FixDimension i in listComFixDimension)
{
CaxSQL.Delete <Com_FixDimension>(i);
}
#endregion
#region 刪除Com_FixInspection
CaxSQL.Delete <Com_FixInspection>(cCom_FixInspection);
#endregion
Is_Exit = false;
}
if (!Is_Exit)
{
cCom_FixInspection = new Com_FixInspection()
{
comPartOperation = cCom_PartOperation,
fixinsDescription = this.Desc.Text,
fixinsERP = this.ERPNo.Text,
fixinsNo = this.FixInsNo.Text,
fixPicPath = this.S_PicPath,
fixPartName = Path.GetFileNameWithoutExtension(FixInsUploadDlg.workPart.FullPath)
};
IList <Com_FixDimension> listCom_FixDimension = new List <Com_FixDimension>();
foreach (DadDimension i in listDimensionData)
{
//Com_FixDimension cCom_FixDimension = new Com_FixDimension()
//{
// comFixInspection = comFixInspection
//};
////cCom_FixDimension.comFixInspection = comFixInspection;
//CaxME.MappingData(i, ref cCom_FixDimension);
//listCom_FixDimension.Add(cCom_FixDimension);
Com_FixDimension cCom_FixDimension = new Com_FixDimension();
cCom_FixDimension.MappingData(i);
cCom_FixDimension.comFixInspection = cCom_FixInspection;
listCom_FixDimension.Add(cCom_FixDimension);
}
cCom_FixInspection.comFixDimension = listCom_FixDimension;
CaxSQL.Save <Com_FixInspection>(cCom_FixInspection);
//傳OIS圖到SERVER
if (!Directory.Exists(S_Folder))
{
System.IO.Directory.CreateDirectory(S_Folder);
}
CaxPublic.DirectoryCopy(this.L_Folder, S_Folder, true);
}
#endregion
MessageBox.Show("上傳完成");
base.Close();
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
}