private List <System.Windows.Point> CalcAsync(int i, double width)
{
List <System.Windows.Point> points = new List <System.Windows.Point>();
Plot plot = new Plot()
{
Boundary = tempSelectedBoundary, BuildingType = BuildingTypes.다세대, LegalCVR = setting.LegalCVR[i], LegalFAR = setting.LegalFAR[i], LegalMaxF = setting.LegalMaxF[i], PlotType = (PlotTypes)i, RoadWidths = new List <double>()
{
4
}
};
//test
var roadCenter = Regulation.RoadCenterLines(plot);
var north = Regulation.North(roadCenter, plot);
var clearance = Regulation.Clearance(plot);
int minimum = north.Count > clearance.Count ? clearance.Count : north.Count;
List <Curve> nc = new List <Curve>();
for (int j = 0; j < minimum; j++)
{
var a = Curve.CreateBooleanIntersection(north[j], clearance[j]);
nc.Add(a[0]);
}
//List<List<Curve>> curvesCollection = new List<List<Curve>>();
List <double> valuesCollection = new List <double>();
var start = DateTime.Now;
for (int r = 0; r < 180; r++)
{
int maxfloor;
var reg = Regulation.MergedRegulation_TopOnly(nc, plot, (double)r / 180 * Math.PI, out maxfloor);
List <Curve> trash;
List <Rhino.Geometry.Line> trash2;
var length = Calculate.AngleMax_Simple(reg.Last(), maxfloor, width, (double)r / 180 * Math.PI, out trash, out trash2);
valuesCollection.Add(length);
points.Add(new System.Windows.Point(r, length * maxfloor / 10));
}
var end = DateTime.Now;
int endsec = end.Second;
int startsec = start.Second;
if (startsec > endsec)
{
endsec += 60;
}
double endtime = endsec * 1000 + end.Millisecond;
double starttime = startsec * 1000 + start.Millisecond;
double x = (endtime - starttime) / 1000;
Rhino.RhinoApp.WriteLine("180회 소요시간 " + x.ToString() + "초, 회당 " + (x / 180).ToString() + "초");
double lengthmax = points.Select(n => n.Y).Max();
return(points);
}
//private void GenerateOne_Click(object sender, RoutedEventArgs e)
//{
// if (PlotTypeCombo.SelectedIndex == -1)
// return;
// if (tempSelectedBoundary == null)
// return;
// int i = PlotTypeCombo.SelectedIndex;
// Plot plot = new Plot() { Boundary = tempSelectedBoundary, BuildingType = BuildingTypes.다세대, LegalCVR = setting.LegalCVR[i], LegalFAR = setting.LegalFAR[i], LegalMaxF = setting.LegalMaxF[i], PlotType = (PlotTypes)i, RoadWidths = new List<double>() { 4 } };
// //test
// var roadCenter = Regulation.RoadCenterLines(plot);
// var north = Regulation.North(roadCenter, plot);
// var clearance = Regulation.Clearance(plot);
// int minimum = north.Count > clearance.Count ? clearance.Count : north.Count;
// List<Curve> nc = new List<Curve>();
// for (int j = 0; j < minimum; j++)
// {
// var a = Curve.CreateBooleanIntersection(north[j], clearance[j]);
// nc.Add(a[0]);
// }
// int r = (int)Angle.Value;
// var start = DateTime.Now;
// var reg = Regulation.MergedRegulation(nc, plot, (double)r / 180 * Math.PI);
// var end = DateTime.Now;
// //Rhino.RhinoApp.WriteLine("법규선계산 : " + (end.Second - start.Second) + "초" + (end.Millisecond - start.Millisecond) + "ms");
// start = DateTime.Now;
// List<Curve> temp1;
// List<Curve> temp2;
// var val1 = Calculate.AngleMax_Josh(reg.Last(), plot.LegalMaxF, 9, (double)r / 180 * Math.PI,out temp1);
// end = DateTime.Now;
// //Rhino.RhinoApp.WriteLine("최대길이계산 : " + (end.Second - start.Second) + "초" + (end.Millisecond - start.Millisecond) + "ms yvalue = " + Math.Round(length, 1).ToString());
// var val2 = Calculate.AngleMax(reg.Last(), plot.LegalMaxF, 9, (double)r / 180 * Math.PI, out temp2);
// //points.Add(new System.Windows.Point(r, length));
// //double lengthmax = points.Select(n => n.Y).Max();
// preview.reg = reg;
// preview.model1 = temp1;
// preview.model2 = temp2;
// preview.value1 = val1;
// preview.value2 = val2;
// Rhino.RhinoDoc.ActiveDoc.Views.ActiveView.Redraw();
//}
/// <summary>
/// asdfasfdfdassfdasfda
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void Angle_Combo_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
if (Angle_Combo.SelectedIndex == -1)
{
return;
}
if (PlotTypeCombo.SelectedIndex == -1)
{
return;
}
if (tempSelectedBoundary == null)
{
return;
}
if (Width_Combo.SelectedIndex == -1)
{
return;
}
int i = PlotTypeCombo.SelectedIndex;
//폭
double width = (double)Width_Combo.SelectedItem;
double canvasy = Graph.Height;
double canvasx = Graph.Width;
List <System.Windows.Point> points = new List <System.Windows.Point>();
Plot plot = new Plot()
{
Boundary = tempSelectedBoundary, BuildingType = BuildingTypes.다세대, LegalCVR = setting.LegalCVR[i], LegalFAR = setting.LegalFAR[i], LegalMaxF = setting.LegalMaxF[i], PlotType = (PlotTypes)i, RoadWidths = new List <double>()
{
4
}
};
//test
var roadCenter = Regulation.RoadCenterLines(plot);
var north = Regulation.North(roadCenter, plot);
var clearance = Regulation.Clearance(plot);
int minimum = north.Count > clearance.Count ? clearance.Count : north.Count;
List <Curve> nc = new List <Curve>();
for (int j = 0; j < minimum; j++)
{
var a = Curve.CreateBooleanIntersection(north[j], clearance[j]);
nc.Add(a[0]);
}
double r = (double)Angle_Combo.SelectedValue;
var start = DateTime.Now;
var reg = Regulation.MergedRegulation(nc, plot, (double)r / 180 * Math.PI);
var end = DateTime.Now;
//Rhino.RhinoApp.WriteLine("법규선계산 : " + (end.Second - start.Second) + "초" + (end.Millisecond - start.Millisecond) + "ms");
start = DateTime.Now;
//List<Curve> temp1;
List <Curve> temp2;
//var val1 = Calculate.AngleMax_Josh(reg.Last(), plot.LegalMaxF, 9, (double)r / 180 * Math.PI, out temp1);
end = DateTime.Now;
List <Rhino.Geometry.Line> parkingBaseLine;
//Rhino.RhinoApp.WriteLine("최대길이계산 : " + (end.Second - start.Second) + "초" + (end.Millisecond - start.Millisecond) + "ms yvalue = " + Math.Round(length, 1).ToString());
var val2 = Calculate.AngleMax_Simple(reg.Last(), plot.LegalMaxF, width, (double)r / 180 * Math.PI, out temp2, out parkingBaseLine);
double aptDistance = (reg.Last().PointAtStart.Z - 3.3) * 0.8;
double linedistance = width + aptDistance;
var far = Math.Round(val2 * width * plot.LegalMaxF / plot.Area, 4) * 100;
//points.Add(new System.Windows.Point(r, length));
//유닛분배........................................................................................
//유닛정보,라인..음..
List <Point3d> aptSeparatePoints = new List <Point3d>();
List <Point3d> balancedPoints = new List <Point3d>();
for (int j = 0; j < temp2.Count; j++)
{
var tempcurve = temp2[j];
var templength = tempcurve.GetLength();
var unitset = (UnitSetting)Units.Items[0];
var unitlength = unitset.Area / width;
var p1 = tempcurve.PointAtLength(templength);
aptSeparatePoints.Add(p1);
int aptcount = 0;
while (templength > 2 * unitlength)
{
var p2 = tempcurve.PointAtLength(templength - unitlength);
var p3 = tempcurve.PointAtLength(templength - unitlength * 2);
aptcount += 2;
aptSeparatePoints.Add(p2);
aptSeparatePoints.Add(p3);
templength -= 2 * unitlength;
}
double lengthleftperapt = templength / aptcount;
double balancedaptlength = unitlength + lengthleftperapt;
for (int k = 0; k <= aptcount; k++)
{
var temppoint = tempcurve.PointAtLength(k * balancedaptlength);
balancedPoints.Add(temppoint);
}
}
preview.points = aptSeparatePoints;
preview.balancedpoints = balancedPoints;
List <Curve> parkingLinesCollection = new List <Curve>();
List <Curve> baseCurves = parkingBaseLine.Select(n => n.ToNurbsCurve() as Curve).ToList();
ParkingMaster master = new ParkingMaster(tempSelectedBoundary, baseCurves, linedistance);
int parkingCount = master.CalculateParkingScore();
parkingLinesCollection = master.parkingCells;
//for (int p = 0; p < parkingBaseLine.Count; p++)
//{
// bool addfirst = p == 0 ? true : false;
// List<Curve> parkingLines = ParkingPrediction.Calculate(linedistance, parkingBaseLine[p].ToNurbsCurve(), addfirst);
// parkingLinesCollection.AddRange(parkingLines);
//}
//주차는.?
//for()
//plot, aptline, width, distance
//distance 와 set
//double lengthmax = points.Select(n => n.Y).Max();
preview.reg = reg;
preview.model1 = parkingLinesCollection;
preview.model2 = temp2;
preview.value1 = parkingCount;
preview.value2 = far;
Rhino.RhinoDoc.ActiveDoc.Views.ActiveView.Redraw();
}