/// <summary>
/// 保存QC問題
/// </summary>
/// <param name="pqc"></param>
/// <returns></returns>
public ReturnValueInfo AddQCProblem(ProjectQCProblem_pqcp_Info problem, PrintProject_ppj_Info project, ShiftProjList_spl_Info shiftProject)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
if (problem.pqcp_PQCID == Guid.Empty)
{
result.boolValue = false;
result.messageText = "QC問題記錄沒有設置QC記錄ID，不能保存QC問題。";
return result;
}
if (problem.pqcp_iWasteQty == 0 && problem.pqcp_iDefectiveQty == 0)
{
result.boolValue = false;
result.messageText = "QC廢品數量和次品數量不能同時為0。";
return result;
}
using (DBContext uow = DBContext.Begin())
{
problem.pqcp_RecordID = Guid.NewGuid();
problem.pqcp_dAddDate = DateTime.Now;
problem.pqcp_dLastDate = DateTime.Now;
ProjectQCProblem_pqcp_Info pqcp_max = uow.CurrentSession.QueryOver<ProjectQCProblem_pqcp_Info>().And(d => d.pqcp_PQCID == problem.pqcp_PQCID).OrderBy(d => d.pqcp_iSeq).Desc.Take(1).SingleOrDefault();
if (pqcp_max != null)
{
problem.pqcp_iSeq = pqcp_max.pqcp_iSeq + 1;
}
else
{
problem.pqcp_iSeq = 1;
}
uow.CurrentSession.SaveOrUpdate(uow.CurrentSession.Merge(problem));
//CountSPLQCInfo(uow, project, shiftProject);
}
result.boolValue = true;
}
catch (Exception ex)
{
result.boolValue = false;
result.messageText = ex.Message;
}
return result;
}
/// <summary>
/// 分析工程生產狀態
/// </summary>
/// <param name="machineStatus"></param>
/// <param name="oldStatus"></param>
/// <param name="schProj"></param>
/// <returns></returns>
private CustEnum.ProductionStatus AnalysisProdStatus(DBContext uow, CustEnum.MachineStatus machineStatus, CustEnum.ProductionStatus oldStatus, ScheduleProjList_swl_Info project, PrintProject_ppj_Info ppj, ShiftProjList_spl_Info spl)
{
CustEnum.ProductionStatus newStatus = CustEnum.ProductionStatus.STOP;
if (project != null && (project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE.ToString() || project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString()))
{
if (machineStatus == CustEnum.MachineStatus.MACHINE_PRODUCTION)//開始生產
{
newStatus = CustEnum.ProductionStatus.PROD_BEGIN;
}
else if (machineStatus == CustEnum.MachineStatus.MACHINE_SHUTDOWN)
{
newStatus = CustEnum.ProductionStatus.PRO_PREPARE;
}
}
else if (project != null
&& (project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_IN.ToString()
|| project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_SLOW.ToString()
|| project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_STOP.ToString()
|| project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_STOP_OT.ToString()))
{
if (machineStatus == CustEnum.MachineStatus.MACHINE_PRODUCTION)//開機
{
if (oldStatus == CustEnum.ProductionStatus.PROD_STOP)
{
newStatus = CustEnum.ProductionStatus.PROD_RESART;//生產繼續
}
else
{
newStatus = CustEnum.ProductionStatus.PROD_IN;//生產中
}
}
else if (machineStatus == CustEnum.MachineStatus.MACHINE_SHUTDOWN)//停機
{
if (oldStatus == CustEnum.ProductionStatus.PROD_IN || project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_SLOW.ToString())
{
int totalTimes = (int)(DateTime.Now - project.PROD_STOP_Datetime.Value).TotalSeconds;//已經停機的時間
#region 停機期間是否存在用餐記錄
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == project.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == ppj.ppj_RecordID);
dinnerQuery.And(d => d.dsm_splID == spl.spl_RecordID);
dinnerQuery.And(d => d.dnr_dEndTime > project.PROD_STOP_Datetime);//停機在就餐結束前發生
dinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PROD_IN.ToString());
dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty);
var piDinnerRecord = dinnerQuery.List();
if (piDinnerRecord.Count > 0)
{
DinnerRecord_dnr_Info dnr = piDinnerRecord[0];
mLog.Debug("--------當前機台停機，就餐中，就餐時間=" + (int)(dnr.dnr_dEndTime.Value - dnr.dnr_dBeginTime.Value).TotalSeconds);
totalTimes -= (int)(dnr.dnr_dEndTime.Value - dnr.dnr_dBeginTime.Value).TotalSeconds;
}
#endregion
mLog.Debug("檢查到當前PLC 機台狀態是停機狀態，持續時間" + totalTimes.ToString());
if (totalTimes > project.PROD_STOP_COND * 60) //超出最長停機時間
{
newStatus = CustEnum.ProductionStatus.PROD_STOP;//生產中停機
}
else
{
newStatus = oldStatus;
}
}
else if (oldStatus == CustEnum.ProductionStatus.PROD_STOP || project.swl_cProjStatus == CustEnum.ProjectStatus.PROD_STOP_OT.ToString())
{
newStatus = oldStatus;
}
}
}
mLog.Debug("當前工程狀態=" + newStatus.ToString());
return newStatus;
}
/// <summary>
/// 獲取信號控制主檔
/// </summary>
/// <returns></returns>
//public List<SignalLightsStatus_sls_Info> GetSignalControls()
//{
// List<SignalLightsStatus_sls_Info> result = null;
// try
// {
// CRUD baseDal = new CRUD();
// result = baseDal.ExcuteHQL<SignalLightsStatus_sls_Info>("from SignalLightsStatus_sls_Info") as List<SignalLightsStatus_sls_Info>;
// }
// catch (Exception ex)
// {
// result = new List<SignalLightsStatus_sls_Info>();
// mLog.Error("PLCBL.GetSignalControls", ex);
// // throw;
// }
// return result;
//}
/// <summary>
/// 工程開始生產，狀態改變規則：準備中-->生產中
/// </summary>
/// <param name="schProj"></param>
/// <param name="printProj"></param>
/// <param name="shiftProject"></param>
/// <param name="data"></param>
/// <returns></returns>
public bool ProduceBegin(DBContext uow, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, PLCData_pda_Info data)
{
try
{
//using (DBContext uow = DBContext.Begin())
//{
DateTime dealTime = DateTime.Now;
#region 更新印刷工程信息
schProj.swl_iIsByModify = true;
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_IN.ToString();
schProj.swl_dStatusChange = dealTime;
schProj.swl_dLastDate = dealTime;
uow.CurrentSession.Update(uow.CurrentSession.Merge(schProj));
#endregion
#region 更新生產工程信息
if (printProj != null)
{
printProj.ppj_dProdBeginTime = dealTime;
printProj.ppj_fMachineSpeed = data.pda_iMachineSpeed;
printProj.ppj_iActualProdNum = data.pad_iQty;
printProj.ppj_iCountProdNum = data.pad_iQty;
printProj.ppj_dLastDate = dealTime;
var projectDinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == schProj.swl_RecordID);
projectDinnerQuery.And(d => d.dsm_ppjID == printProj.ppj_RecordID);
projectDinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PREPARE.ToString());
int projectDinnerTime = (int)projectDinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
printProj.ppj_iActualPrepairTime = (int)(printProj.ppj_dProdBeginTime.Value - printProj.ppj_dProjBeginTime).TotalSeconds - projectDinnerTime;
uow.CurrentSession.Update(printProj);
}
#endregion
#region 更新班次內工程信息
#region 準備時間計算
shiftProject.spl_dProdBegin = printProj.ppj_dProdBeginTime;
int prepairTime = (int)(shiftProject.spl_dProdBegin.Value - shiftProject.spl_dBeginTime).TotalSeconds;
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == schProj.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == printProj.ppj_RecordID);
dinnerQuery.And(d => d.dsm_splID == shiftProject.spl_RecordID);
dinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PREPARE.ToString());
int dinnerTime = (int)dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
shiftProject.spl_iPrepairTime = prepairTime - dinnerTime;
#endregion
shiftProject.spl_dLastDate = dealTime;
shiftProject.spl_iBeginQTY = 0;
shiftProject.spl_iQTY = data.pad_iQty;
shiftProject.spl_iEndQTY = data.pad_iQty;
shiftProject.spl_iCalQTY = shiftProject.spl_iEndQTY - shiftProject.spl_iBeginQTY;
uow.CurrentSession.Update(shiftProject);
#endregion
#region 更新生產中停機的結束時間
ProjectStopRecord_psrd_Info psrd_prepare;
var query_pre = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>();
query_pre.And(d => d.psrd_SPLID == shiftProject.spl_RecordID);
query_pre.And(d => d.psrd_dEndTime == null);
query_pre.And(d => d.psrd_cTypeID == CustEnum.RecordType.NORMAL.ToString());
IList<ProjectStopRecord_psrd_Info> list_pre = query_pre.List<ProjectStopRecord_psrd_Info>();
if (list_pre.Count > 0)
{
psrd_prepare = list_pre[0];
psrd_prepare.psrd_dEndTime = dealTime;
psrd_prepare.psrd_dLastDate = dealTime;
psrd_prepare.psrd_iActualStopTime = TimeCalculater.ProjectStopRecordActualTime(uow, psrd_prepare);
uow.CurrentSession.Update(uow.CurrentSession.Merge(psrd_prepare));
printProj.ppj_iStopTime += psrd_prepare.psrd_iActualStopTime;
uow.CurrentSession.Update(uow.CurrentSession.Merge(printProj));
shiftProject.spl_iStopTime += psrd_prepare.psrd_iActualStopTime;
uow.CurrentSession.Update(uow.CurrentSession.Merge(shiftProject));
}
#endregion
// }
return true;
}
catch (Exception ex)
{
uow.CanCommit = false;
mLog.Error("PLCBL.ProduceBegin" + ex);
return false;
}
}
/// <summary>
/// 班次內工程總運作時間＝當前時間－班次內工程開始時間
/// </summary>
/// <param name="project"></param>
/// <returns></returns>
public static int ShiftProjectRunTime(ShiftProjList_spl_Info project)
{
if (project.spl_dBeginTime != null)
{
if (project.spl_dEndTime == null)
{
int total = (int)(DateTime.Now - project.spl_dBeginTime).TotalSeconds;
return total;
}
else
{
int total = (int)(project.spl_dEndTime.Value - project.spl_dBeginTime).TotalSeconds;
return total;
}
}
return 0;
}
public ReturnValueInfo StopProject(ProjectStopRec_psr_Info stopRecord, ShiftProjList_spl_Info spl)
{
// DateTime start = DateTime.Now;
ReturnValueInfo result = new ReturnValueInfo();
if (stopRecord == null || stopRecord.Project == null)
{
result.boolValue = false;
result.messageText = "工程為空。";
}
else
{
try
{
using (DBContext uow = DBContext.Begin())
{
try
{
DateTime dealTime = DateTime.Now;
#region 更新印刷工程記錄為無效的
if (stopRecord.PrintProject == null)
{
throw new Exception("不能抽起工程，工程數據信息缺失，請聯繫開發人員！");
}
else
{
stopRecord.PrintProject.ppj_lActiveRecord = false;
if (stopRecord.Project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE.ToString() || stopRecord.Project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString())
{
stopRecord.PrintProject.ppj_dProdBeginTime = dealTime;
}
stopRecord.PrintProject.ppj_dProdEndTime = dealTime;
stopRecord.PrintProject.ppj_dLastDate = dealTime;
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == stopRecord.Project.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == stopRecord.PrintProject.ppj_RecordID);
int dinnerTime = (int)dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
stopRecord.PrintProject.ppj_iProdSumTime = stopRecord.PrintProject.ppj_iProjRunTime - stopRecord.PrintProject.ppj_iActualPrepairTime - stopRecord.PrintProject.ppj_iStopTime - dinnerTime;
uow.CurrentSession.Update(stopRecord.PrintProject);
}
#endregion
#region 更新班次內工程結束時間
if (spl != null)
{
if (stopRecord.Project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE.ToString() || stopRecord.Project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString())
{
spl.spl_dProdBegin = dealTime;
}
spl.spl_dEndTime = dealTime;
#region 準備時間計算
int totalPrepare = (int)(spl.spl_dProdBegin.Value - spl.spl_dBeginTime).TotalSeconds;
spl.spl_iPrepairTime = totalPrepare;
#endregion
//計算正常生產時間，需優化
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == stopRecord.Project.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == stopRecord.PrintProject.ppj_RecordID);
dinnerQuery.And(d => d.dsm_splID == spl.spl_RecordID);
int dinnerTime = (int)dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
spl.spl_iProdSumTime = spl.spl_iRunTime - spl.spl_iPrepairTime - spl.spl_iStopTime - dinnerTime;
var query_psrd = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>();
query_psrd.And(d => d.psrd_dEndTime == null);
query_psrd.And(d => d.psrd_cTypeID == CustEnum.RecordType.NORMAL.ToString());
query_psrd.And(d => d.psrd_SPLID == spl.spl_RecordID);
ProjectStopRecord_psrd_Info psrd = query_psrd.Take(1).SingleOrDefault();
if (psrd != null)
{
psrd.psrd_dEndTime = dealTime;
psrd.psrd_dLastDate = dealTime;
psrd.psrd_iActualStopTime = TimeCalculater.ProjectStopRecordActualTime(uow, psrd);
uow.CurrentSession.Update(psrd);
stopRecord.PrintProject.ppj_iStopTime += psrd.psrd_iActualStopTime;
stopRecord.PrintProject.ppj_iStopTimes += 1;
uow.CurrentSession.Update(stopRecord.PrintProject);
spl.spl_iStopTime += psrd.psrd_iActualStopTime;
spl.spl_iStopTimes += 1;
}
uow.CurrentSession.Update(spl);
}
#endregion
#region 保存抽起的記錄
stopRecord.psr_SWLID = stopRecord.Project.swl_RecordID;
stopRecord.psr_cRecordID = Guid.NewGuid();
stopRecord.psr_dAddDate = dealTime;
stopRecord.psr_lSync = false;
uow.CurrentSession.Save(stopRecord);
#endregion
#region 將印刷工程的生產順序排到最後
//int max_PrintOrder = 1;
//ScheduleProjList_swl_Info max_swl = uow.CurrentSession.QueryOver<ScheduleProjList_swl_Info>().OrderBy(d => d.swl_iPrintOrder).Desc().Take(1).SingleOrDefault();
//if (max_swl != null)
//{
// max_PrintOrder = max_swl.swl_iPrintOrder;
//}
//ScheduleProjList_swl_Info swl = uow.CurrentSession.Get<ScheduleProjList_swl_Info>(data.Project.swl_RecordID);
//swl.swl_iPrintOrder = max_PrintOrder + 1;
//uow.CurrentSession.Update(swl);
#endregion
#region 班次進入空閒狀態
SpareStatus_sst_Info info_new = new SpareStatus_sst_Info();
info_new.sst_RecordID = Guid.NewGuid();
info_new.sst_iSIFOID = spl.spl_SIFOID;
info_new.sst_dBeginTime = dealTime;
info_new.sst_dAddDate = dealTime;
info_new.sst_cMachineNO = stopRecord.Project.swl_cMachineNO;
IdleState_ism_Info ism = uow.CurrentSession.QueryOver<IdleState_ism_Info>().And(d => d.ism_lIsBuildin && d.ism_lIsAtive).Take(1).SingleOrDefault();
if (ism != null)
{
info_new.sst_cStatusName = ism.ism_cStateName;
info_new.sst_StatusID = ism.ism_RecordID;
}
uow.CurrentSession.Save(info_new);
#endregion
#region 更新工程狀態為抽起
stopRecord.Project.swl_iIsByModify = true;
stopRecord.Project.swl_iCompletedQty += stopRecord.PrintProject.ppj_iActualProdNum;
stopRecord.Project.swl_cProjStatus = CustEnum.ToString(CustEnum.ProjectStatus.STOP);
stopRecord.Project.swl_dLastDate = dealTime;
uow.CurrentSession.Update(stopRecord.Project);
#endregion
result.boolValue = true;
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
result.boolValue = true;
}
catch (Exception ex)
{
string message = "抽起工程出現錯誤，machineID=" + stopRecord.Project.swl_cMachineNO;
message += "ScheduleProjList_swl_Info=" + Common.Util.JsonUtil.JsonSerializer<ScheduleProjList_swl_Info>(stopRecord.Project);
message += "PrintProject_ppj_Info=" + Common.Util.JsonUtil.JsonSerializer<PrintProject_ppj_Info>(stopRecord.PrintProject);
message += "ShiftProjList_spl_Info=" + Common.Util.JsonUtil.JsonSerializer<ShiftProjList_spl_Info>(spl);
Common.Util.MessageUtil.SendDevMail(message, ex);
result.boolValue = false;
result.messageText = Resource.B0017 + "：" + ex.Message;
Common.General.BLLoger.Error(result.messageText);
}
}
// DateTime end = DateTime.Now;
// Common.General.BLLoger.Debug("抽起工程，耗時" + (end - start).Milliseconds.ToString());
return result;
}
//public bool ChangetShift(string machineID, ref ShiftProjList_spl_Info shiftProject)
//{
// try
// {
// mLog.Debug("執行轉班邏輯");
// ShiftProjList_spl_Info newSpl = null;
// ShiftProjList_spl_Info oldSpl = shiftProject;
// using (Transaction uow = Transaction.Begin())
// {
// mLog.Debug("更新班次內工程 ShiftProjList_spl_Info");
// oldSpl.spl_dLastDate = DateTime.Now;
// oldSpl.spl_dEndTime = oldSpl.ShiftInfo.sifo_dEndTime;
// oldSpl.spl_lSync = false;
// uow.CurrentSession.Update(oldSpl);
// #region
// ShiftInfo_sifo_Info nextShift = null;
// var query = uow.CurrentSession.QueryOver<ShiftInfo_sifo_Info>();
// query.And(d => d.sifo_dBeginTime >= DateTime.Now);
// query.And(d => d.sifo_cMachineNO == machineID).OrderBy(d => d.sifo_dBeginTime);
// IList<ShiftInfo_sifo_Info> list = query.List<ShiftInfo_sifo_Info>();
// if (list.Count > 0)
// {
// nextShift = list[0];
// }
// else
// {
// //todo:creat new shift
// }
// mLog.Debug("創建新的班次內工程 ShiftProjList_spl_Info");
// newSpl = new ShiftProjList_spl_Info();
// newSpl.spl_RecordID = Guid.NewGuid();
// newSpl.spl_SIFOID = nextShift.sifo_RecordID;
// newSpl.spl_PPJID = oldSpl.spl_PPJID;
// newSpl.spl_dBeginTime = nextShift.sifo_dBeginTime.Value;
// newSpl.spl_dProdBegin = nextShift.sifo_dBeginTime.Value;
// newSpl.spl_dAddDate = DateTime.Now;
// newSpl.spl_iBeginQTY = oldSpl.PrintProject.ppj_iCountProdNum;
// newSpl.spl_iBeginQTY = shiftProject.spl_iEndQTY;
// uow.CurrentSession.Save(newSpl);
// uow.CurrentSession.Flush();
// newSpl.PrintProject = oldSpl.PrintProject;
// newSpl.ShiftInfo = nextShift;
// shiftProject = newSpl;
// #endregion
// #region 結束工程停機記錄
// ProjectStopRecord_psrd_Info psrd = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>().And(d => d.psrd_SPLID == oldSpl.spl_RecordID).And(d => d.psrd_dEndTime == null).Take(1).SingleOrDefault();
// if (psrd != null)
// {
// psrd.psrd_dEndTime = oldSpl.ShiftInfo.sifo_dEndTime;
// psrd.psrd_dLastDate = DateTime.Now;
// psrd.psrd_lSync = false;
// uow.CurrentSession.Update(psrd);
// mLog.Debug("創建跨班次停機記錄 ProjectStopRecord_psrd_Info");
// ProjectStopRecord_psrd_Info nextPsrd = new ProjectStopRecord_psrd_Info();
// nextPsrd.psrd_RecordID = Guid.NewGuid();
// nextPsrd.psrd_dBeginTime = nextShift.sifo_dBeginTime.Value;
// nextPsrd.psrd_dAddDate = DateTime.Now;
// nextPsrd.psrd_PPJID = newSpl.spl_PPJID;
// nextPsrd.psrd_SPLID = newSpl.spl_RecordID;
// nextPsrd.psrd_cTypeID = CustEnum.RecordType.NORMAL.ToString();
// uow.CurrentSession.Save(nextPsrd);
// }
// #endregion
// #region 結束幾臺空閒狀態
// SpareStatus_ssts_Info ssts = uow.CurrentSession.QueryOver<SpareStatus_ssts_Info>().And(d => d.sst_cMachineNO == machineID)
// .And(d => d.sst_iSIFOID == oldSpl.spl_SIFOID).And(d => d.sst_dEndTime == null).Take(1).SingleOrDefault();
// if (ssts != null)
// {
// ssts.sst_dEndTime = oldSpl.ShiftInfo.sifo_dEndTime;
// ssts.sst_dLastDate = DateTime.Now;
// ssts.sst_lSync = false;
// uow.CurrentSession.Update(ssts);
// mLog.Debug("創建跨班次空閒記錄 SpareStatus_ssts_Info");
// SpareStatus_ssts_Info nextSsts = new SpareStatus_ssts_Info();
// nextSsts.sst_cMachineNO = machineID;
// nextSsts.sst_dBeginTime = nextShift.sifo_dBeginTime.Value;
// nextSsts.sst_iSIFOID = nextShift.sifo_RecordID;
// nextSsts.sst_dAddDate = DateTime.Now;
// uow.CurrentSession.Save(nextSsts);
// }
// #endregion
// }
// return true;
// }
// catch (Exception ex)
// {
// mLog.Error(ex);
// }
// return false;
//}
public bool ChangeShift(string machineID, ShiftInfo_sifo_Info currentShift, ShiftInfo_sifo_Info nextShift, ScheduleProjList_swl_Info scheduleProject, PrintProject_ppj_Info printProject, ShiftProjList_spl_Info shiftProject)
{
mLog.Info("班次轉換新邏輯");
try
{
if (currentShift == null)
{
throw new Exception("當前班次對象不能為空");
}
if (nextShift == null)
{
throw new Exception("下一班次對象不能為空");
}
using (DBContext uow = DBContext.Begin())
{
try
{
if (printProject != null && shiftProject != null && shiftProject.spl_RecordID != Guid.Empty)
{
PrintProject_ppj_Info currentProject = printProject;
ShiftProjList_spl_Info currentShiftProject = shiftProject;
#region 更新班次內工程
mLog.Debug("更新班次內工程 ShiftProjList_spl_Info");
currentShiftProject.spl_dLastDate = DateTime.Now;
currentShiftProject.spl_dEndTime = currentShift.sifo_dEndTime;
currentShiftProject.spl_lSync = false;
//就餐時間
#region 準備時間計算
if (currentShiftProject.spl_dProdBegin.HasValue)//沒有結束準備
{
currentShiftProject.spl_iPrepairTime = TimeCalculater.ShiftProjectActualPrepairTime(uow, currentShiftProject);
currentProject.ppj_iActualPrepairTime += currentShiftProject.spl_iPrepairTime;
}
#endregion
#region 正常生產時間
currentShiftProject.spl_iProdSumTime = TimeCalculater.ShiftProjectProdTime(uow, currentShiftProject);
#endregion
uow.CurrentSession.Update(currentShiftProject);
#endregion
#region 創建新的班次內工程
mLog.Debug("創建新的班次內工程 ShiftProjList_spl_Info");
ShiftProjList_spl_Info newSpl = new ShiftProjList_spl_Info();
newSpl.spl_RecordID = Guid.NewGuid();
newSpl.spl_SIFOID = nextShift.sifo_RecordID;
newSpl.spl_PPJID = currentShiftProject.spl_PPJID;
newSpl.spl_dBeginTime = nextShift.sifo_dBeginTime.Value;
newSpl.spl_dAddDate = DateTime.Now;
newSpl.spl_iBeginQTY = currentShiftProject.spl_iEndQTY;
newSpl.spl_iEndQTY = currentShiftProject.spl_iEndQTY;
if (currentShiftProject.spl_dProdBegin != null)
{
newSpl.spl_dProdBegin = nextShift.sifo_dBeginTime.Value;
}
else
{
newSpl.spl_dProdBegin = null;
}
uow.CurrentSession.Save(newSpl);
#endregion
#region 結束工程停機記錄
ProjectStopRecord_psrd_Info psrd = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>()
.And(d => d.psrd_SPLID == currentShiftProject.spl_RecordID)
.And(d => d.psrd_dEndTime == null).Take(1).SingleOrDefault();
if (psrd != null)
{
psrd.psrd_dEndTime = currentShift.sifo_dEndTime;
psrd.psrd_dLastDate = DateTime.Now;
psrd.psrd_lSync = false;
psrd.psrd_iActualStopTime = TimeCalculater.ProjectStopRecordActualTime(uow, psrd);
uow.CurrentSession.Update(psrd);
mLog.Debug("更新跨更的班次內工程的停機時間");
currentShiftProject.spl_iStopTime += psrd.psrd_iActualStopTime;
uow.CurrentSession.Update(currentShiftProject);
currentProject.ppj_iStopTime += psrd.psrd_iActualStopTime;
currentProject.ppj_iStopTimes++;
uow.CurrentSession.Update(currentProject);
//mLog.Debug("創建跨班次停機記錄 ProjectStopRecord_psrd_Info");
//ProjectStopRecord_psrd_Info nextPsrd = new ProjectStopRecord_psrd_Info();
//nextPsrd.psrd_RecordID = Guid.NewGuid();
//nextPsrd.psrd_dBeginTime = nextShift.sifo_dBeginTime.Value;
//nextPsrd.psrd_dAddDate = DateTime.Now;
//nextPsrd.psrd_PPJID = newSpl.spl_PPJID;
//nextPsrd.psrd_SPLID = newSpl.spl_RecordID;
//nextPsrd.psrd_cTypeID = CustEnum.RecordType.NORMAL.ToString();
//uow.CurrentSession.Save(nextPsrd);
//newSpl.spl_iStopTimes++;
//uow.CurrentSession.Update(newSpl);
}
#endregion
}
#region 結束機台空閒狀態
SpareStatus_sst_Info ssts = uow.CurrentSession.QueryOver<SpareStatus_sst_Info>().And(d => d.sst_cMachineNO == machineID)
.And(d => d.sst_iSIFOID == currentShift.sifo_RecordID).And(d => d.sst_dEndTime == null).Take(1).SingleOrDefault();
if (ssts != null)
{
IdleState_ism_Info ism = null;
if (ssts.sst_StatusID == Guid.Empty)
{
ism = uow.CurrentSession.QueryOver<IdleState_ism_Info>().And(d => d.ism_lIsBuildin && d.ism_lIsAtive).Take(1).SingleOrDefault();
if (ism != null)
{
ssts.sst_cStatusName = ism.ism_cStateName;
ssts.sst_StatusID = ism.ism_RecordID;
}
}
ssts.sst_dEndTime = currentShift.sifo_dEndTime;
ssts.sst_dLastDate = DateTime.Now;
ssts.sst_lSync = false;
uow.CurrentSession.Update(ssts);
mLog.Debug("創建跨班次空閒記錄 SpareStatus_ssts_Info");
SpareStatus_sst_Info nextSsts = new SpareStatus_sst_Info();
nextSsts.sst_RecordID = Guid.NewGuid();
nextSsts.sst_cMachineNO = machineID;
nextSsts.sst_dBeginTime = nextShift.sifo_dBeginTime.Value;
nextSsts.sst_iSIFOID = nextShift.sifo_RecordID;
nextSsts.sst_dAddDate = DateTime.Now;
if (ism != null)
{
nextSsts.sst_cStatusName = ism.ism_cStateName;
nextSsts.sst_StatusID = ism.ism_RecordID;
}
uow.CurrentSession.Save(nextSsts);
}
#endregion
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
return true;
}
catch (Exception ex)
{
string message = "班次轉換新邏輯，machineID=" + machineID + "\r\n";
message += "PrintProject_ppj_Info=" + Common.Util.JsonUtil.JsonSerializer<PrintProject_ppj_Info>(printProject) + "\r\n";
message += "ShiftProjList_spl_Info=" + Common.Util.JsonUtil.JsonSerializer<ShiftProjList_spl_Info>(shiftProject) + "\r\n";
Common.Util.MessageUtil.SendDevMail(message, ex);
mLog.Error(ex);
return false;
// throw;
}
}
/// <summary>
/// 班次內工程實際準備時間=生產開始時間-工程開始時間-就餐時間
/// </summary>
/// <param name="project"></param>
/// <returns></returns>
public static int ShiftProjectPrepairTime(ShiftProjList_spl_Info spl, PrintProject_ppj_Info ppj)
{
throw new NotImplementedException();
//if (DateTime.MinValue == ppj.ppj_dProjBeginTime)
//{
// return 0;
//}
//else
//{
// int total = 0;
// var dinners = DinnerBL.GetDinnerRecord(null, null, ppj.ppj_RecordID.ToString(), spl.spl_RecordID.ToString(), "%" + CustEnum.ProjectStatus.PREPARE + "%");
// int dinnerTime = (int)dinners.Where(d => d.dnr_dEndTime.HasValue).Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
// if (spl.spl_dProdBegin.HasValue)
// {
// total = (int)(spl.spl_dProdBegin.Value - spl.spl_dBeginTime).TotalSeconds;
// }
// else
// {
// total = (int)(DateTime.Now - spl.spl_dBeginTime).TotalSeconds;
// }
// total = total - dinnerTime;
// return total;
//}
}
public ReturnValueInfo RestartProject(ScheduleProjList_swl_Info schProject, ref PrintProject_ppj_Info project, ShiftInfo_sifo_Info shift)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
using (DBContext uow = DBContext.Begin())
{
try
{
//工程状态轉化為準備中
schProject.swl_cProjStatus = CustEnum.ProjectStatus.PREPARE.ToString();
schProject.swl_lSync = false;
uow.CurrentSession.Update(schProject);
#region 重新創建一條印刷工程擴展信息記錄
PrintProject_ppj_Info ppj_restart = new PrintProject_ppj_Info();
ppj_restart.ppj_RecordID = Guid.NewGuid();
ppj_restart.ppj_SWLID = schProject.swl_RecordID;
ppj_restart.ppj_lActiveRecord = true;
ppj_restart.ppj_lSync = false;
ppj_restart.ppj_dAddDate = DateTime.Now;
ppj_restart.ppj_dProjBeginTime = DateTime.Now;
ppj_restart.ppj_cRank = "";
ppj_restart.ppj_iSpeed = project.ppj_iSpeed;
ppj_restart.ppj_iQCInterval = project.ppj_iQCInterval;
ppj_restart.ppj_iPertimeProdNum = project.ppj_iPertimeProdNum;
ppj_restart.ppj_lActiveRecord = true;
#region 工程附件信息
ProjectAdditionalInformation_pai_Info paiInfo = new ProjectAdditionalInformation_pai_Info();
paiInfo.pai_PPJRecordID = ppj_restart.ppj_RecordID;
paiInfo.pai_iFrontProcessDefectiveQty = 0;
paiInfo.pai_iFrontProcessWasteQty = 0;
paiInfo.pai_iGoldPaperTimes = 0;
paiInfo.pai_iRevolution = 0;
paiInfo.pai_iTemperature = 0;
paiInfo.pai_cUnit = string.Empty;
paiInfo.pai_iUnitLength = 0;
paiInfo.pai_iUVLuminosity = 0;
paiInfo.pai_iUnitWidth = 0;
uow.CurrentSession.Save(paiInfo);
ppj_restart.AdditionalInformation = paiInfo;
#endregion
#region 准备工作项目
var query = uow.CurrentSession.QueryOver<ProjectPreJobItem_ppji_Info>();
Guid ppjId = project.ppj_RecordID;
query.And(d => d.ppji_PPJID == ppjId);
IList<ProjectPreJobItem_ppji_Info> ppjis = query.List<ProjectPreJobItem_ppji_Info>();
ppj_restart.PrepareJobItems = ppjis;
foreach (ProjectPreJobItem_ppji_Info item in ppjis)
{
item.ppji_PPJID = ppj_restart.ppj_RecordID;
uow.CurrentSession.Save(item);
}
#endregion
uow.CurrentSession.Save(ppj_restart);
#endregion
#region 創建新的班次內工程信息
ShiftProjList_spl_Info shiftProject = new ShiftProjList_spl_Info();
shiftProject.spl_RecordID = Guid.NewGuid();
shiftProject.spl_dBeginTime = DateTime.Now;
shiftProject.spl_dAddDate = DateTime.Now;
shiftProject.spl_SIFOID = shift.sifo_RecordID;
shiftProject.spl_PPJID = ppj_restart.ppj_RecordID;
uow.CurrentSession.Save(shiftProject);
#endregion
#region 班次空閒狀態結束
SpareStatus_sst_Info info = uow.CurrentSession.QueryOver<SpareStatus_sst_Info>().And(d => d.sst_iSIFOID == shift.sifo_RecordID).And(d => d.sst_dEndTime == null).Take(1).SingleOrDefault();
if (info != null)
{
info.sst_dEndTime = DateTime.Now;
info.sst_dLastDate = DateTime.Now;
uow.CurrentSession.Update(info);
}
#endregion
if (ppj_restart.ShiftProjects == null)
{
ppj_restart.ShiftProjects = new List<ShiftProjList_spl_Info>();
}
ppj_restart.ShiftProjects.Add(shiftProject);
project = ppj_restart;
}
catch
{
uow.CanCommit = false;
throw;
}
}
result.boolValue = true;
}
catch (Exception ex)
{
result.boolValue = false;
result.messageText = Resource.B0026 + "：" + ex.Message;
Common.General.BLLoger.Error(result.messageText);
}
return result;
}
/// <summary>
/// 重新開始生產，狀態改變規則：生產中停機-->生產中
/// </summary>
/// <param name="uow"></param>
/// <param name="schProj"></param>
/// <param name="printProj"></param>
/// <param name="shiftProject"></param>
/// <param name="data"></param>
/// <returns></returns>
public bool ProduceRestart(DBContext uow, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, PLCData_pda_Info data)
{
try
{
#region 更新印刷工程信息
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_IN.ToString();
schProj.swl_dStatusChange = DateTime.Now;
schProj.swl_dLastDate = DateTime.Now;
schProj.swl_iIsByModify = true;
uow.CurrentSession.Update(schProj);
#endregion
#region 更新生產中停機的結束時間
ProjectStopRecord_psrd_Info psrd_old;
var query = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>();
query.And(d => d.psrd_SPLID == shiftProject.spl_RecordID);
query.And(d => d.psrd_dEndTime == null);
query.And(d => d.psrd_cTypeID == CustEnum.RecordType.NORMAL.ToString());
IList<ProjectStopRecord_psrd_Info> list = query.List<ProjectStopRecord_psrd_Info>();
if (list.Count > 0)
{
psrd_old = list[0];
psrd_old.psrd_dEndTime = DateTime.Now;
psrd_old.psrd_dLastDate = DateTime.Now;
//停機就餐時間
var stopDinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_ppjID == printProj.ppj_RecordID);
stopDinnerQuery.And(d => d.dsm_splID == shiftProject.spl_RecordID);
stopDinnerQuery.And(d => d.dsm_psrdID == psrd_old.psrd_RecordID);
stopDinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PROD_STOP.ToString() || d.dsm_cProjectStatus == CustEnum.ProjectStatus.PROD_STOP_OT.ToString());
int stopDinnerTime = (int)stopDinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
psrd_old.psrd_iActualStopTime = (int)(psrd_old.psrd_dEndTime.Value - psrd_old.psrd_dBeginTime.Value).TotalSeconds - stopDinnerTime;
uow.CurrentSession.Update(psrd_old);
printProj.ppj_fMachineSpeed = data.pda_iMachineSpeed;
printProj.ppj_iStopTime += psrd_old.psrd_iActualStopTime;
//實際準備時間=生產結束時間-工程開始時間-就餐時間
// printProj.ppj_iActualPrepairTime = (int)(printProj.ppj_dProdBeginTime.Value - printProj.ppj_dProjBeginTime).TotalSeconds - stopDinnerTime;
printProj.ppj_iProdSumTime = printProj.ppj_iProjRunTime - printProj.ppj_iStopTime - printProj.ppj_iActualPrepairTime - printProj.ppj_iQCSumTime - stopDinnerTime;
uow.CurrentSession.Update(printProj);
shiftProject.spl_iStopTime += psrd_old.psrd_iActualStopTime;
//int totalPrepare;
//if (shiftProject.spl_dProdBegin.HasValue)
//{
// totalPrepare = (int)(shiftProject.spl_dProdBegin.Value - shiftProject.spl_dBeginTime).TotalSeconds;
//}
//else
//{
// totalPrepare = (int)(shiftProject.spl_dEndTime.Value - shiftProject.spl_dBeginTime).TotalSeconds;
//}
//shiftProject.spl_iPrepairTime = totalPrepare - stopDinnerTime;
shiftProject.spl_iProdSumTime = shiftProject.spl_iRunTime - shiftProject.spl_iPrepairTime - shiftProject.spl_iQCTime - shiftProject.spl_iStopTime - stopDinnerTime;
uow.CurrentSession.Update(shiftProject);
}
#endregion
return true;
}
catch (Exception ex)
{
uow.CanCommit = false;
mLog.Error("PLCBL.ProduceRestart" + ex);
return false;
}
}
public ReturnValueInfo CreateProdutionProject(ShiftInfo_sifo_Info shift, ScheduleProjList_swl_Info swl)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
using (DBContext uow = DBContext.Begin())
{
try
{
swl.swl_cProjStatus = CustEnum.ProjectStatus.PREPARE.ToString();
#region 生成印刷工程數據
PrintProject_ppj_Info ppj = new PrintProject_ppj_Info();
ppj.ppj_RecordID = Guid.NewGuid();
ppj.ppj_SWLID = swl.swl_RecordID;
//工程狀態轉換為準備中，設置工程開始時間為當前時間
ppj.ppj_dProjBeginTime = DateTime.Now;
ppj.ppj_dLastDate = ppj.ppj_dAddDate = DateTime.Now;
ppj.ppj_lActiveRecord = true;
ppj.ppj_lSync = false;
ppj.ppj_cRank = "";
#region 設置默認值
IList<CodeMaster_cmt_Info> cmts = uow.CurrentSession.QueryOver<CodeMaster_cmt_Info>().Where(d => d.cmt_cKey1 == CustEnum.KEY1.TYPEVALUE.ToString() && d.cmt_cKey2 == CustEnum.KEY2.DEFAULT.ToString() && d.cmt_cValue == CustEnum.DEFALUT.PERTIMEQTY.ToString()).List<CodeMaster_cmt_Info>();
if (cmts.Count == 1)
{
ppj.ppj_iPertimeProdNum = (int)cmts[0].cmt_fNumber;
}
//cmts = uow.CurrentSession.QueryOver<CodeMaster_cmt_Info>().Where(d => d.cmt_cKey1 == CustEnum.KEY1.TYPEVALUE.ToString() && d.cmt_cKey2 == CustEnum.KEY2.DEFAULT.ToString() && d.cmt_cValue == CustEnum.DEFALUT.PRODUTIONSPEED.ToString()).List<CodeMaster_cmt_Info>();
//if (cmts.Count == 1)
//{
// ppj.ppj_iSpeed = (int)cmts[0].cmt_fNumber;
//}
IList<MachineMaster_mmt_Info> machineInfo = uow.CurrentSession.QueryOver<MachineMaster_mmt_Info>().Where(d => d.mmt_cMachineID == swl.swl_cMachineNO).List<MachineMaster_mmt_Info>();
if (machineInfo.Count == 1)
{
int produceSpeed = 0;
int.TryParse(machineInfo[0].mmt_cModel, out produceSpeed);//由於數據庫暫時沒有目標車速的欄位，GISS用機台型號錄入數值代替
ppj.ppj_iSpeed = produceSpeed;
}
cmts = uow.CurrentSession.QueryOver<CodeMaster_cmt_Info>().Where(d => d.cmt_cKey1 == CustEnum.KEY1.TYPEVALUE.ToString() && d.cmt_cKey2 == CustEnum.KEY2.DEFAULT.ToString() && d.cmt_cValue == CustEnum.DEFALUT.QCINTERVAL.ToString()).List<CodeMaster_cmt_Info>();
if (cmts.Count == 1)
{
ppj.ppj_iQCInterval = (int)cmts[0].cmt_fNumber;
}
else
{
ppj.ppj_iQCInterval = 30;
}
cmts = uow.CurrentSession.QueryOver<CodeMaster_cmt_Info>().Where(d => d.cmt_cKey1 == CustEnum.KEY1.TYPEVALUE.ToString() && d.cmt_cKey2 == CustEnum.KEY2.DEFAULT.ToString() && d.cmt_cValue == CustEnum.DEFALUT.PROD_STOP_COND.ToString()).List<CodeMaster_cmt_Info>();
if (cmts.Count == 1)
{
swl.PROD_STOP_COND = (int)cmts[0].cmt_fNumber;
}
else
{
swl.PROD_STOP_COND = 8;
}
#endregion
#endregion
#region 工程附件信息
ProjectAdditionalInformation_pai_Info paiInfo = new ProjectAdditionalInformation_pai_Info();
paiInfo.pai_PPJRecordID = ppj.ppj_RecordID;
paiInfo.pai_iFrontProcessDefectiveQty = 0;
paiInfo.pai_iFrontProcessWasteQty = 0;
paiInfo.pai_iGoldPaperTimes = 0;
paiInfo.pai_iRevolution = 0;
paiInfo.pai_iTemperature = 0;
paiInfo.pai_cUnit = string.Empty;
paiInfo.pai_iUnitLength = 0;
paiInfo.pai_iUVLuminosity = 0;
paiInfo.pai_iUnitWidth = 0;
uow.CurrentSession.Save(paiInfo);
ppj.AdditionalInformation = paiInfo;
#endregion
#region 生成印刷工程準備工作項
//IProjectPreJobItemDA projectPreJodItemDA = DAL.Factory.HBPMS.SQLiteDAFacotry.GetDAL<IProjectPreJobItemDA>(DAL.Factory.HBPMS.SQLiteDAFacotry.ProjectPreJodItemDA);
//prol.PrepareJobItems = new List<ProjectPreJobItem_ppji_Info>();
#endregion
#region 班次內工程
ShiftProjList_spl_Info shiftProject = new ShiftProjList_spl_Info();
shiftProject.spl_RecordID = Guid.NewGuid();
shiftProject.spl_SIFOID = shift.sifo_RecordID;
shiftProject.spl_PPJID = ppj.ppj_RecordID;
shiftProject.spl_dBeginTime = ppj.ppj_dProjBeginTime;
shiftProject.spl_lSync = false;
shiftProject.spl_dLastDate = shiftProject.spl_dAddDate = DateTime.Now;
uow.CurrentSession.Save(shiftProject);
#endregion
#region 班次空閒狀態結束
SpareStatus_sst_Info info = uow.CurrentSession.QueryOver<SpareStatus_sst_Info>().And(d => d.sst_iSIFOID == shift.sifo_RecordID).And(d => d.sst_dEndTime == null).Take(1).SingleOrDefault();
if (info != null)
{
info.sst_dEndTime = DateTime.Now;
info.sst_dLastDate = DateTime.Now;
if (info.sst_StatusID == Guid.Empty)
{
IdleState_ism_Info ism = uow.CurrentSession.QueryOver<IdleState_ism_Info>().And(d => d.ism_lIsBuildin && d.ism_lIsAtive).Take(1).SingleOrDefault();
if (ism != null)
{
info.sst_cStatusName = ism.ism_cStateName;
info.sst_StatusID = ism.ism_RecordID;
}
}
var dinnerTime = (int)uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_sstID == info.sst_RecordID).And(d => d.dnr_dEndTime != null).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
if (info.sst_dEndTime.HasValue)
{
info.sst_iTime = (int)(info.sst_dEndTime.Value - info.sst_dBeginTime.Value).TotalSeconds - dinnerTime;
}
uow.CurrentSession.Update(info);
}
#endregion
ppj.ShiftProjects = new List<ShiftProjList_spl_Info>();
ppj.ShiftProjects.Add(shiftProject);
result.ValueObject = ppj;
uow.CurrentSession.Save(ppj);
uow.CurrentSession.Update(swl);
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
result.boolValue = true;
}
catch (Exception ex)
{
Common.General.BLLoger.Debug("call ProjectPPCBL.CreateProdutionProject", ex);
result.boolValue = false;
result.ValueObject = ex;
result.messageText = ex.Message;
}
return result;
}
public ReturnValueInfo FinishProject(ScheduleProjList_swl_Info project, PrintProject_ppj_Info projectDetail, ShiftProjList_spl_Info shiftProject)
{
//DateTime start = DateTime.Now;
ReturnValueInfo result = new ReturnValueInfo();
try
{
using (DBContext uow = DBContext.Begin())
{
try
{
DateTime dealTime = DateTime.Now;
#region 更新前一個停機記錄的結束時間
var stopRec = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>();
stopRec.And(d => d.psrd_dEndTime == null).And(d => d.psrd_SPLID == shiftProject.spl_RecordID).OrderBy(d => d.psrd_dBeginTime).Desc();
ProjectStopRecord_psrd_Info psrd = stopRec.Take(1).SingleOrDefault();
if (psrd != null)
{
psrd.psrd_dLastDate = dealTime;
psrd.psrd_dEndTime = dealTime;
psrd.psrd_iActualStopTime = TimeCalculater.ProjectStopRecordActualTime(uow, psrd);
uow.CurrentSession.Update(psrd);
projectDetail.ppj_iStopTime += psrd.psrd_iActualStopTime;
shiftProject.spl_iStopTime += psrd.psrd_iActualStopTime;
}
#endregion
#region 更新班次內工程
/// 更新班次內工程結束時間
if (project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE.ToString() || project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString())
{
shiftProject.spl_dProdBegin = dealTime;
}
shiftProject.spl_dEndTime = shiftProject.spl_dLastDate = dealTime;
/// 準備時間計算
int totalPrepare = (int)(shiftProject.spl_dProdBegin.Value - shiftProject.spl_dBeginTime).TotalSeconds;
shiftProject.spl_iPrepairTime = totalPrepare;
/// 計算生產時間
shiftProject.spl_iProdSumTime = TimeCalculater.ShiftProjectProdTime(uow, shiftProject);
uow.CurrentSession.Update(shiftProject);
#endregion
#region PPJ
if (project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE.ToString() || project.swl_cProjStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString())
{
projectDetail.ppj_dProdBeginTime = dealTime;
}
projectDetail.ppj_dProdEndTime = dealTime;
///計算生產時間
projectDetail.ppj_iProdSumTime = TimeCalculater.PrintProjectProdTime(uow, projectDetail);
uow.CurrentSession.Update(projectDetail);
#endregion
#region SWL
project.swl_iCompletedQty += projectDetail.ppj_iActualProdNum;
project.swl_cProjStatus = CustEnum.ProjectStatus.FINISH.ToString();
project.swl_dLastDate = dealTime;
project.swl_iIsByModify = true;
uow.CurrentSession.Update(project);
#endregion
#region 班次進入空閒狀態
SpareStatus_sst_Info info_new = new SpareStatus_sst_Info();
info_new.sst_RecordID = Guid.NewGuid();
info_new.sst_iSIFOID = shiftProject.spl_SIFOID;
info_new.sst_dBeginTime = dealTime;
info_new.sst_dAddDate = dealTime;
info_new.sst_cMachineNO = project.swl_cMachineNO;
IdleState_ism_Info ism = uow.CurrentSession.QueryOver<IdleState_ism_Info>().And(d => d.ism_lIsBuildin && d.ism_lIsAtive).Take(1).SingleOrDefault();
if (ism != null)
{
info_new.sst_cStatusName = ism.ism_cStateName;
info_new.sst_StatusID = ism.ism_RecordID;
}
uow.CurrentSession.Save(info_new);
#endregion
result.boolValue = true;
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
}
catch (Exception ex)
{
string message = "結束工程出錯，machineID=" + project.swl_cMachineNO;
message += "ScheduleProjList_swl_Info=" + Common.Util.JsonUtil.JsonSerializer<ScheduleProjList_swl_Info>(project);
message += "PrintProject_ppj_Info=" + Common.Util.JsonUtil.JsonSerializer<PrintProject_ppj_Info>(projectDetail);
message += "ShiftProjList_spl_Info=" + Common.Util.JsonUtil.JsonSerializer<ShiftProjList_spl_Info>(shiftProject);
Common.Util.MessageUtil.SendDevMail(message, ex);
result.messageText = ex.Message;
result.boolValue = false;
throw new Exception(Resource.B0023 + ex.Message);
}
// DateTime end = DateTime.Now;
// Common.General.BLLoger.Debug("結束工程，耗時" + (end - start).Milliseconds.ToString());
return result;
}
/// <summary>
///
/// </summary>
/// <param name="project">生產工程</param>
/// <param name="shiftProject">班次內工程</param>
/// <param name="reason">原因</param>
/// <param name="CorrectQTY">糾正數量</param>
/// <returns></returns>
public ReturnValueInfo CorrectProjectQTY(PrintProject_ppj_Info project, ShiftProjList_spl_Info shiftProject, CodeMaster_cmt_Info reason, int CorrectQTY)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
using (DBContext uow = DBContext.Begin())
{
try
{
//保存糾正數量記錄
CorrectRecord_ctr_Info ctr = new CorrectRecord_ctr_Info();
ctr.ctr_RecordID = Guid.NewGuid();
ctr.ctr_cType = CustEnum.KEY2.CORRECTQTY.ToString();
ctr.ctr_cReasonID = reason.cmt_cValue;
ctr.ctr_cReason = reason.cmt_cRemark;
ctr.ctr_dLastDate = ctr.ctr_dAddDate = DateTime.Now;
ctr.ctr_iAdjustProdQTY = shiftProject.spl_iQTY + CorrectQTY;
ctr.ctr_iProdQTY = shiftProject.spl_iQTY;
ctr.ctr_lSync = false;
ctr.ctr_PPJID = shiftProject.spl_PPJID;
ctr.ctr_SPLID = shiftProject.spl_RecordID;
uow.CurrentSession.Save(ctr);
//更新班次內工程生產數量
shiftProject.spl_iQTY += CorrectQTY;
shiftProject.spl_dLastDate = DateTime.Now;
uow.CurrentSession.Update(shiftProject);
//更新工程生產數量
project.ppj_iActualProdNum += CorrectQTY;
uow.CurrentSession.Update(project);
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
result.boolValue = true;
}
catch (Exception ex)
{
result.boolValue = false;
result.messageText = Resource.B0025 + "：" + ex.Message;
}
return result;
}
/// <summary>
/// 創建人：JustinLeung
/// 描述：保存工程的準備工作項目，工程狀態由“準備中”轉換為“生產中”
/// </summary>
/// <param name="projectDetail"></param>
/// <returns></returns>
public ReturnValueInfo UpdateProjPreJobItem(ScheduleProjList_swl_Info project, ShiftProjList_spl_Info shiftProject, PrintProject_ppj_Info projectDetail)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
if (projectDetail.PrepareJobItems == null)
{
result.boolValue = false;
result.messageText = "工程準備工作項目數據不存在。";
}
else
{
DateTime dtDeal = DateTime.Now;
using (DBContext uow = DBContext.Begin())
{
try
{
uow.CurrentSession.CreateQuery("delete from ProjectPreJobItem_ppji_Info d where d.ppji_PPJID = ?").SetString(0, projectDetail.ppj_RecordID.ToString()).ExecuteUpdate();
projectDetail.ppj_iPredictPrepairTime = 0;
foreach (var ppji in projectDetail.PrepareJobItems)
{
ppji.ppji_RecordID = Guid.NewGuid();
ppji.ppji_PPJID = projectDetail.ppj_RecordID;
ppji.ppji_dLastDate = ppji.ppji_dAddDate = dtDeal;
uow.CurrentSession.Save(ppji);
PrepareProjectMaster_ppm_Info item = uow.CurrentSession.Get<PrepareProjectMaster_ppm_Info>(ppji.ppji_PPMID);
if (!item.ppm_lIsParallelable)
{
projectDetail.ppj_iPredictPrepairTime += (int)(item.ppm_iPredictedTime * 60);
}
}
projectDetail.ppj_dProdBeginTime = dtDeal;
//就餐時間
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_ppjID == projectDetail.ppj_RecordID);
dinnerQuery.And(d => d.dsm_splID == shiftProject.spl_RecordID);
dinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PREPARE.ToString() || d.dsm_cProjectStatus == CustEnum.ProjectStatus.PREPARE_OT.ToString());
int dinnerTime = (int)dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
//實際準備時間=生產結束時間-工程開始時間-就餐時間
projectDetail.ppj_iActualPrepairTime = (int)(projectDetail.ppj_dProdBeginTime.Value - projectDetail.ppj_dProjBeginTime).TotalSeconds - dinnerTime;
projectDetail.ppj_iProdSumTime = projectDetail.ppj_iProjRunTime - projectDetail.ppj_iStopTime - projectDetail.ppj_iActualPrepairTime - dinnerTime;
projectDetail.ppj_dLastDate = dtDeal;
uow.CurrentSession.Update(projectDetail);
shiftProject.spl_dProdBegin = dtDeal;
shiftProject.spl_dLastDate = dtDeal;
int totalPrepare;
if (shiftProject.spl_dProdBegin.HasValue)
{
totalPrepare = (int)(shiftProject.spl_dProdBegin.Value - shiftProject.spl_dBeginTime).TotalSeconds;
}
else
{
totalPrepare = (int)(shiftProject.spl_dEndTime.Value - shiftProject.spl_dBeginTime).TotalSeconds;
}
shiftProject.spl_iPrepairTime = totalPrepare - dinnerTime;
shiftProject.spl_iProdSumTime = shiftProject.spl_iRunTime - shiftProject.spl_iPrepairTime - shiftProject.spl_iStopTime - dinnerTime;
uow.CurrentSession.Update(shiftProject);
if (projectDetail.ScheduleProject != null)
{
project.swl_cProjStatus = Common.CustEnum.ProjectStatus.PROD_IN.ToString();
project.swl_dLastDate = dtDeal;
project.swl_dStatusChange = dtDeal;
uow.CurrentSession.Update(project);
}
}
catch (Exception)
{
uow.CanCommit = false;
throw;
}
}
}
result.boolValue = true;
}
catch (Exception ex)
{
Common.General.BLLoger.Error(ex);
result.boolValue = false;
result.messageText = ex.Message;
}
return result;
}
public ReturnValueInfo UpdateProjectPallet(PrintProject_ppj_Info project, ShiftProjList_spl_Info shiftProject, PalletLabelPrintRecord_plpr_Info palletLabel)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
using (DBContext trans = DBContext.Begin())
{
PrintProject_ppj_Info lProject = trans.CurrentSession.Load<PrintProject_ppj_Info>(project.ppj_RecordID);
ShiftProjList_spl_Info lShiftProject = trans.CurrentSession.Load<ShiftProjList_spl_Info>(shiftProject.spl_RecordID);
lProject.ppj_iPalletQty++;
lShiftProject.spl_iPalletQty++;
trans.CurrentSession.Update(lProject);
trans.CurrentSession.Update(lShiftProject);
palletLabel.plpr_RecordID = Guid.NewGuid();
palletLabel.plpr_SWLID = project.ScheduleProject.swl_RecordID;
palletLabel.plpr_cProductName = project.ScheduleProject.swl_cProdName;
palletLabel.plpr_cSONO = project.ScheduleProject.swl_cSONO;
palletLabel.plpr_iPredictPrintQTY = project.ScheduleProject.swl_iPlanProdQty;
palletLabel.plpr_dAddDate = DateTime.Now;
trans.CurrentSession.Save(palletLabel);
}
result.boolValue = true;
}
catch (Exception ex)
{
result.messageText = ex.Message;
}
return result;
}
public ReturnValueInfo QCPass(ProjectQCRecord_pqc_Info pqc, PrintProject_ppj_Info project, ShiftProjList_spl_Info shiftProject)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
if (pqc == null || pqc.pqc_iQCQTY == 0)
{
result.boolValue = false;
result.messageText = "抽查數量不能為零。";
return result;
}
else
{
if (pqc.pqc_SPLID == null || pqc.pqc_SPLID == Guid.Empty)
{
result.boolValue = false;
result.messageText = "抽查數量不能為零。";
return result;
}
using (DBContext uow = DBContext.Begin())
{
ProjectQCRecord_pqc_Info pqc_old = uow.CurrentSession.Get<ProjectQCRecord_pqc_Info>(pqc.pqc_RecordID);
pqc_old.pqc_iQCQTY = pqc.pqc_iQCQTY;
pqc_old.pqc_dLastDate = DateTime.Now;
pqc_old.pqc_dQCEndTime = DateTime.Now;
uow.CurrentSession.Update(pqc_old);
//CountSPLQCInfo(uow, project, shiftProject);
}
result.boolValue = true;
}
}
catch (Exception ex)
{
result.boolValue = false;
result.messageText = ex.Message;
}
return result;
}
/// <summary>
/// 生產中停機
/// </summary>
/// <param name="uow"></param>
/// <param name="schProj"></param>
/// <param name="printProj"></param>
/// <param name="shiftProject"></param>
/// <param name="data"></param>
/// <returns></returns>
public bool ProduceStop(DBContext uow, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, PLCData_pda_Info data)
{
try
{
#region 停機記錄
ProjectStopRecord_psrd_Info psrd = new ProjectStopRecord_psrd_Info();
psrd.psrd_RecordID = Guid.NewGuid();
psrd.psrd_PPJID = shiftProject.spl_PPJID;
psrd.psrd_SPLID = shiftProject.spl_RecordID;
psrd.psrd_dBeginTime = schProj.PROD_STOP_Datetime;
psrd.psrd_dAddDate = DateTime.Now;
psrd.psrd_dLastDate = DateTime.Now;
psrd.psrd_cTypeID = CustEnum.RecordType.NORMAL.ToString();
psrd.psrd_iPredictStopTime = 0;
psrd.psrd_lSync = false;
uow.CurrentSession.Save(psrd);
#endregion
#region 更新印刷工程信息
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_STOP.ToString();
schProj.swl_dStatusChange = DateTime.Now;
schProj.swl_dLastDate = DateTime.Now;
schProj.swl_iIsByModify = true;
uow.CurrentSession.Update(schProj);
#endregion
#region 生产工程
printProj.ppj_fMachineSpeed = data.pda_iMachineSpeed;
printProj.ppj_iStopTimes += 1;
uow.CurrentSession.Update(printProj);
#endregion
#region 班次內工程
shiftProject.spl_iStopTimes += 1;
uow.CurrentSession.Update(shiftProject);
#endregion
#region 用餐記錄
//工程在生產中進入就餐，但由於工程進入生產中停機狀態有一定時間的約定延遲，如果超過這個時間，進入停機狀態，需要更新就餐時工程的狀態
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == schProj.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == printProj.ppj_RecordID);
dinnerQuery.And(d => d.dsm_splID == shiftProject.spl_RecordID);
dinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PROD_IN.ToString());
dinnerQuery = dinnerQuery.OrderBy(d => d.dnr_dBeginTime).Desc;
var listDinner = dinnerQuery.And(d => d.dnr_DSMID != null).List();
if (listDinner.Count > 0)
{
DinnerRecord_dnr_Info dnr = listDinner[0];
if (dnr.dnr_dBeginTime >= psrd.psrd_dBeginTime)//用餐開始時間在停機開始時間之後，因此需要將用餐記錄的工程狀態更新為“PROD_STOP”,並更新停機記錄ID
{
dnr.dsm_cProjectStatus = CustEnum.ProjectStatus.PROD_STOP.ToString();
dnr.dsm_psrdID = psrd.psrd_RecordID;
dnr.dnr_dLastDate = DateTime.Now;
uow.CurrentSession.Update(dnr);
}
}
#endregion
return true;
}
catch (Exception ex)
{
uow.CanCommit = false;
mLog.Error("PLCBL.ProduceStop" + ex);
return false;
}
}
/// <summary>
/// 更新QC問題
/// </summary>
/// <param name="pqc"></param>
/// <returns></returns>
public ReturnValueInfo UpdateQCProblem(ProjectQCProblem_pqcp_Info problem, PrintProject_ppj_Info project, ShiftProjList_spl_Info shiftProject)
{
ReturnValueInfo result = new ReturnValueInfo();
try
{
if (problem.pqcp_PQCID == Guid.Empty)
{
result.boolValue = false;
result.messageText = "QC問題記錄沒有設置QC記錄ID，不能保存QC問題。";
return result;
}
if (problem.pqcp_iWasteQty == 0 && problem.pqcp_iDefectiveQty == 0)
{
result.boolValue = false;
result.messageText = "QC廢品數量和次品數量不能同時為0。";
return result;
}
using (DBContext uow = DBContext.Begin())
{
ProjectQCProblem_pqcp_Info pqcp_old = uow.CurrentSession.Get<ProjectQCProblem_pqcp_Info>(problem.pqcp_RecordID);
pqcp_old.pqcp_iProblemID = problem.pqcp_iProblemID;
pqcp_old.pqcp_iWasteQty = problem.pqcp_iWasteQty;
pqcp_old.pqcp_iDefectiveQty = problem.pqcp_iDefectiveQty;
pqcp_old.pqcp_dLastDate = DateTime.Now;
pqcp_old.pqcp_lSync = false;
uow.CurrentSession.Update(pqcp_old);
//CountSPLQCInfo(uow, project, shiftProject);
}
result.boolValue = true;
}
catch (Exception ex)
{
result.boolValue = false;
result.messageText = ex.Message;
}
return result;
}
/// <summary>
/// 生產中停機超時
/// </summary>
/// <param name="uow"></param>
/// <param name="schProj"></param>
/// <param name="printProj"></param>
/// <param name="shiftProject"></param>
/// <param name="stopRecord"></param>
/// <returns></returns>
public bool ProduceStop2Long(DBContext uow, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, ProjectStopRecord_psrd_Info stopRecord)
{
try
{
int actualStopTime = (int)(DateTime.Now - stopRecord.psrd_dBeginTime.Value).TotalSeconds;
if (actualStopTime > stopRecord.psrd_iPredictStopTime)
{
#region 更新印刷工程信息
schProj.swl_iIsByModify = true;
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_STOP_OT.ToString();
schProj.swl_dStatusChange = DateTime.Now;
schProj.swl_dLastDate = DateTime.Now;
uow.CurrentSession.Update(uow.CurrentSession.Merge(schProj));
#endregion
}
return true;
}
catch (Exception ex)
{
uow.CanCommit = false;
mLog.Error("PLCBL.ProduceStop2Long" + ex);
return false;
}
}
public ShiftProjList_spl_Info SetCurrentShiftProj(PrintProject_ppj_Info project, ShiftInfo_sifo_Info shiftInfo)
{
ShiftProjList_spl_Info spl = null;
try
{
if (project != null && project.ppj_RecordID != Guid.Empty)
{
using (DBContext uow = DBContext.Begin())
{
if (shiftInfo != null && shiftInfo.sifo_RecordID != Guid.Empty)
{
spl = new ShiftProjList_spl_Info();
spl.spl_RecordID = Guid.NewGuid();
spl.spl_SIFOID = shiftInfo.sifo_RecordID;
spl.spl_PPJID = project.ppj_RecordID;
spl.spl_dBeginTime = DateTime.Now;
spl.spl_dAddDate = DateTime.Now;
spl.spl_iBeginQTY = project.ppj_iCountProdNum;
uow.CurrentSession.Save(spl);
}
}
}
}
catch (Exception ex)
{
spl = null;
Common.General.BLLoger.Info(ex);
}
return spl;
}
/// <summary>
/// 1,savetoDBInterval等於0時，才將數據寫入數據庫，部分時間才重新計算
/// </summary>
/// <param name="uow"></param>
/// <param name="schProj"></param>
/// <param name="printProj"></param>
/// <param name="shiftProject"></param>
/// <param name="data"></param>
/// <param name="savetoDBInterval"></param>
/// <returns></returns>
public bool Producing(DBContext uow, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, PLCData_pda_Info data, int savetoDBInterval)
{
try
{
if (printProj.ppj_iSpeed > data.pda_iProductionSpeed * 60 && data.pda_iMachineSpeed != 0)
{
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_SLOW.ToString();
}
else
{
schProj.swl_cProjStatus = CustEnum.ProjectStatus.PROD_IN.ToString();
}
#region 更新生產工程信息
if (printProj != null)
{
DateTime dealtime = DateTime.Now;
if (savetoDBInterval == 0)
{
var dinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == schProj.swl_RecordID);
dinnerQuery.And(d => d.dsm_ppjID == printProj.ppj_RecordID);
int dinnerTime = (int)dinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
printProj.ppj_iProdSumTime = printProj.ppj_iProjRunTime - printProj.ppj_iActualPrepairTime - printProj.ppj_iStopTime - printProj.ppj_iQCSumTime - dinnerTime;
}
printProj.ppj_iActualProdNum += data.pad_iQty - printProj.ppj_iCountProdNum;
printProj.ppj_iCountProdNum = data.pad_iQty;
printProj.ppj_fProdSpeed = data.pda_iProductionSpeed;
printProj.ppj_fMachineSpeed = data.pda_iMachineSpeed;
printProj.ppj_dLastDate = dealtime;
if (printProj.ppj_dProdBeginTime == null)
{
printProj.ppj_dProdBeginTime = dealtime;
}
if (savetoDBInterval == 0)
{
uow.CurrentSession.Update(printProj);
}
#region 更新班次內工程信息
///增加數量
int diffQTY = shiftProject.spl_iCalQTY - shiftProject.spl_iQTY;
if (shiftProject.spl_iBeginQTY == 0 && shiftProject.spl_iCalQTY == 0)
{
shiftProject.spl_iBeginQTY = 0;
shiftProject.spl_iQTY = 0;
}
shiftProject.spl_iEndQTY = data.pad_iQty;
shiftProject.spl_iCalQTY = shiftProject.spl_iEndQTY - shiftProject.spl_iBeginQTY;
shiftProject.spl_iQTY = shiftProject.spl_iCalQTY - diffQTY;
shiftProject.spl_dLastDate = dealtime;
if (shiftProject.spl_dProdBegin == null)
{
shiftProject.spl_dProdBegin = dealtime;
}
if (savetoDBInterval == 0)
{
var splDinnerQuery = uow.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_swlID == schProj.swl_RecordID);
splDinnerQuery.And(d => d.dsm_splID == shiftProject.spl_RecordID);
int splDinnerTime = (int)splDinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
shiftProject.spl_iProdSumTime = shiftProject.spl_iRunTime - shiftProject.spl_iPrepairTime - shiftProject.spl_iStopTime - shiftProject.spl_iQCTime - splDinnerTime;
uow.CurrentSession.Update(shiftProject);
}
#endregion
}
#endregion
return true;
}
catch (Exception ex)
{
uow.CanCommit = false;
mLog.Error("PLCBL.Producing" + ex);
return false;
}
}
/// <summary>
/// 班次內工程正常生產時間=總運作時間-準備時間-停機時間-用餐時間
/// </summary>
/// <param name="db"></param>
/// <param name="spl"></param>
/// <returns></returns>
public static int ShiftProjectProdTime(DBContext db, ShiftProjList_spl_Info spl)
{
int total = 0;
if (db != null && spl != null)
{
var splDinnerQuery = db.CurrentSession.QueryOver<DinnerRecord_dnr_Info>();
splDinnerQuery.And(d => d.dsm_splID == spl.spl_RecordID);
int splDinnerTime = (int)splDinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
total = ShiftProjectRunTime(spl) - spl.spl_iPrepairTime - spl.spl_iStopTime - splDinnerTime;
}
return total;
}
public CustEnum.ProductionStatus SaveData(CustEnum.ProductionStatus prodStatus, ScheduleProjList_swl_Info schProj, PrintProject_ppj_Info printProj, ShiftProjList_spl_Info shiftProject, PLCData_pda_Info data, int savetoDBInterval)
{
DateTime start = DateTime.Now;
///工程生產狀態
CustEnum.ProductionStatus status;
try
{
//暫時關閉這項功能，由於可能存在性能問題
//IPLCDataDA plcda = SQLiteDAFacotry.GetDAL<IPLCDataDA>(SQLiteDAFacotry.PLCDataDAL);
//if (data != null && data.SaveToDB)
//{
// //選擇工程後開始記錄機台PLC數據
// plcda.Insert(data);
//}
///根據PLC返回數據，分析判斷機台狀態
CustEnum.MachineStatus mstatus = AnalysisStatus(schProj, data);
using (DBContext uow = DBContext.Begin())
{
// 根據印刷工程狀態 與 機台狀態，得出印刷工程生產狀態
status = AnalysisProdStatus(uow, mstatus, prodStatus, schProj, printProj, shiftProject);
//Common.General.BLLoger.Debug("工程生產狀態--->" + status.ToString());
#region
//生產開始
switch (status)
{
case CustEnum.ProductionStatus.PRO_PREPARE:
//#region 更新印刷工程信息
//if (printProj.ppj_iPredictPrepairTime > 0)
//{
// if (printProj.ppj_iActualPrepairTime > printProj.ppj_iPredictPrepairTime)
// {
// schProj.swl_cProjStatus = CustEnum.ProjectStatus.PREPARE_OT.ToString();
// schProj.swl_dStatusChange = DateTime.Now;
// schProj.swl_dLastDate = DateTime.Now;
// uow.CurrentSession.Update(uow.CurrentSession.Merge(schProj));
// }
//}
//#endregion
break;
case CustEnum.ProductionStatus.PROD_BEGIN:
if (status != prodStatus) //狀態改變
{
ProduceBegin(uow, schProj, printProj, shiftProject, data);
}
break;
//生產中
case CustEnum.ProductionStatus.PROD_IN:
Producing(uow, schProj, printProj, shiftProject, data, savetoDBInterval);
break;
//生產中停機
case CustEnum.ProductionStatus.PROD_STOP:
#region 記錄生產中停機信息
if (prodStatus != status) //狀態改變
{
ProduceStop(uow, schProj, printProj, shiftProject, data);
}
else
{
//判斷是否停機超時
IList<ProjectStopRecord_psrd_Info> psrd = uow.CurrentSession.QueryOver<ProjectStopRecord_psrd_Info>().And(d => d.psrd_PPJID == printProj.ppj_RecordID).And(d => d.psrd_dEndTime == null).OrderBy(d => d.psrd_dBeginTime).Desc.List();
if (psrd.Count > 0 && psrd[0].psrd_iPredictStopTime > 0)
{
ProduceStop2Long(uow, schProj, printProj, shiftProject, psrd[0]);
for (int index = 1; index < psrd.Count; index++)
{
psrd[index].psrd_dEndTime = DateTime.Now;
uow.CurrentSession.Update(psrd[index]);
}
}
}
#endregion
break;
//生產繼續
case CustEnum.ProductionStatus.PROD_RESART:
ProduceRestart(uow, schProj, printProj, shiftProject, data);
break;
default:
break;
}
#endregion
}
}
catch (Exception ex)
{
Common.General.BLLoger.Debug(ex);
throw new Exception(Resource.B0022);
}
DateTime end = DateTime.Now;
if (savetoDBInterval == 0)
{
mLog.Debug("保存工程數據到數據庫，耗時" + (end - start).Milliseconds.ToString());
}
else
{
//mLog.Debug("不保存工程數據到數據庫，耗時" + (end - start).Milliseconds.ToString());
}
return status;
}
/// <summary>
/// 班次內工程合計生產時間
/// </summary>
/// <param name="db"></param>
/// <param name="spl"></param>
/// <returns></returns>
public static int ShiftProjectActualPrepairTime(DBContext db, ShiftProjList_spl_Info spl)
{
int total = 0;
if (db != null && spl != null && spl.spl_dProdBegin.HasValue)
{
int totalPrepare = (int)(spl.spl_dProdBegin.Value - spl.spl_dBeginTime).TotalSeconds;
var prepareDinnerQuery = db.CurrentSession.QueryOver<DinnerRecord_dnr_Info>().And(d => d.dsm_ppjID == spl.spl_PPJID);
prepareDinnerQuery.And(d => d.dsm_splID == spl.spl_RecordID);
prepareDinnerQuery.And(d => d.dsm_cProjectStatus == CustEnum.ProjectStatus.PREPARE.ToString());
total = totalPrepare - (int)prepareDinnerQuery.And(d => d.dnr_DSMID != Guid.Empty).List().Sum(d => (d.dnr_dEndTime.Value - d.dnr_dBeginTime.Value).TotalSeconds);
}
return total;
}
/// <summary>
///
/// </summary>
/// <param name="shiftIDs"></param>
/// <returns></returns>
public List<ShiftProjList_spl_Info> GetShiftProjList(List<string> shiftIDs)
{
try
{
List<ShiftProjList_spl_Info> data = new List<ShiftProjList_spl_Info>();
StringBuilder strSql = new StringBuilder();
strSql.AppendLine("select ");
strSql.AppendLine("spl_RecordID,spl_PPJID,spl_SIFOID,spl_dBeginTime,spl_dEndTime,spl_dProdBegin,spl_iBeginQTY,spl_iEndQTY,spl_iCalQTY,spl_iQTY,spl_iPrepairTime,spl_iStopTime,spl_iStopTimes,spl_iRunTime,spl_iProdSumTime,spl_iQCTime,spl_iQCTimes,spl_iWastQTY,spl_iPalletQty,spl_lSync,spl_dAddDate,spl_dLastDate,spl_iDefectiveQty ");
strSql.AppendLine("from ShiftProjList_spl ");
if (shiftIDs != null && shiftIDs.Count > 0)
{
StringBuilder where = new StringBuilder();
where.AppendLine("where ");
foreach (string id in shiftIDs)
{
where.AppendLine("spl_SIFOID='" + id + "' or");
}
strSql.AppendLine(where.ToString().Remove(where.Length - 4));
}
using (SqlDataReader sdr = DbHelperSQL.ExecuteReader(strSql.ToString()))
{
while (sdr.Read())
{
ShiftProjList_spl_Info model = new ShiftProjList_spl_Info();
if (sdr["spl_RecordID"] != null && sdr["spl_RecordID"].ToString() != "")
{
model.spl_RecordID = new Guid(sdr["spl_RecordID"].ToString());
}
if (sdr["spl_PPJID"] != null && sdr["spl_PPJID"].ToString() != "")
{
model.spl_PPJID = new Guid(sdr["spl_PPJID"].ToString());
}
if (sdr["spl_SIFOID"] != null && sdr["spl_SIFOID"].ToString() != "")
{
model.spl_SIFOID = new Guid(sdr["spl_SIFOID"].ToString());
}
if (sdr["spl_dBeginTime"] != null && sdr["spl_dBeginTime"].ToString() != "")
{
model.spl_dBeginTime = DateTime.Parse(sdr["spl_dBeginTime"].ToString());
}
if (sdr["spl_dEndTime"] != null && sdr["spl_dEndTime"].ToString() != "")
{
model.spl_dEndTime = DateTime.Parse(sdr["spl_dEndTime"].ToString());
}
if (sdr["spl_dProdBegin"] != null && sdr["spl_dProdBegin"].ToString() != "")
{
model.spl_dProdBegin = DateTime.Parse(sdr["spl_dProdBegin"].ToString());
}
if (sdr["spl_iBeginQTY"] != null && sdr["spl_iBeginQTY"].ToString() != "")
{
model.spl_iBeginQTY = int.Parse(sdr["spl_iBeginQTY"].ToString());
}
if (sdr["spl_iEndQTY"] != null && sdr["spl_iEndQTY"].ToString() != "")
{
model.spl_iEndQTY = int.Parse(sdr["spl_iEndQTY"].ToString());
}
if (sdr["spl_iCalQTY"] != null && sdr["spl_iCalQTY"].ToString() != "")
{
model.spl_iCalQTY = int.Parse(sdr["spl_iCalQTY"].ToString());
}
if (sdr["spl_iQTY"] != null && sdr["spl_iQTY"].ToString() != "")
{
model.spl_iQTY = int.Parse(sdr["spl_iQTY"].ToString());
}
if (sdr["spl_iPrepairTime"] != null && sdr["spl_iPrepairTime"].ToString() != "")
{
model.spl_iPrepairTime = int.Parse(sdr["spl_iPrepairTime"].ToString());
}
if (sdr["spl_iStopTime"] != null && sdr["spl_iStopTime"].ToString() != "")
{
model.spl_iStopTime = int.Parse(sdr["spl_iStopTime"].ToString());
}
if (sdr["spl_iStopTimes"] != null && sdr["spl_iStopTimes"].ToString() != "")
{
model.spl_iStopTimes = int.Parse(sdr["spl_iStopTimes"].ToString());
}
if (sdr["spl_iRunTime"] != null && sdr["spl_iRunTime"].ToString() != "")
{
model.spl_iRunTime = int.Parse(sdr["spl_iRunTime"].ToString());
}
if (sdr["spl_iProdSumTime"] != null && sdr["spl_iProdSumTime"].ToString() != "")
{
model.spl_iProdSumTime = int.Parse(sdr["spl_iProdSumTime"].ToString());
}
if (sdr["spl_iQCTime"] != null && sdr["spl_iQCTime"].ToString() != "")
{
model.spl_iQCTime = int.Parse(sdr["spl_iQCTime"].ToString());
}
if (sdr["spl_iQCTimes"] != null && sdr["spl_iQCTimes"].ToString() != "")
{
model.spl_iQCTimes = int.Parse(sdr["spl_iQCTimes"].ToString());
}
if (sdr["spl_iWastQTY"] != null && sdr["spl_iWastQTY"].ToString() != "")
{
model.spl_iWastQTY = int.Parse(sdr["spl_iWastQTY"].ToString());
}
if (sdr["spl_iPalletQty"] != null && sdr["spl_iPalletQty"].ToString() != "")
{
model.spl_iPalletQty = int.Parse(sdr["spl_iPalletQty"].ToString());
}
if (sdr["spl_lSync"] != null && sdr["spl_lSync"].ToString() != "")
{
if ((sdr["spl_lSync"].ToString() == "1") || (sdr["spl_lSync"].ToString().ToLower() == "true"))
{
model.spl_lSync = true;
}
else
{
model.spl_lSync = false;
}
}
if (sdr["spl_dAddDate"] != null && sdr["spl_dAddDate"].ToString() != "")
{
model.spl_dAddDate = DateTime.Parse(sdr["spl_dAddDate"].ToString());
}
if (sdr["spl_dLastDate"] != null && sdr["spl_dLastDate"].ToString() != "")
{
model.spl_dLastDate = DateTime.Parse(sdr["spl_dLastDate"].ToString());
}
if (sdr["spl_iDefectiveQty"] != null && sdr["spl_iDefectiveQty"].ToString() != "")
{
model.spl_iDefectiveQty = int.Parse(sdr["spl_iDefectiveQty"].ToString());
}
data.Add(model);
}
}
return data;
}
catch (Exception ex)
{
throw ex;
}
}
